| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Provides a derivation file dumping functionality for tvix-cli that can
be used when passing the --drv-dumpdir CLI arg to tvix-cli.
This will dump all the known derivation files into the specified
directory, making it easier to debug derivation divergences between Tvix
generated drvs and the drvs generated by Nix.
Supersedes: https://cl.tvl.fyi/c/depot/+/11265
Change-Id: I0e10b26eba22032b84ac543af0d4150ad87aed3e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12192
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Otherwise the flattened `ServiceUrlsMemory` docstring becomes the main
binary description, which doesn't make an awful lot of sense.
The help now describes what this CLI does currently (an interface to use
the different Tvix component.
Also, describe what it does not, so people running it without looking
too much other documentation might not get confused about why this
doesn't do anything in `/nix/store`, or doesn't provide the same CLI
surface as Nix.
Change-Id: Ia4838b444f03a10821801a6171d3e956b3cdfdaf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12194
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
Configure the nix path even if globals is already set.
Change-Id: I6598c92ab40ff952f73da04d9e7d3aeb13c16b53
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12176
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
|
|
Use the faster and newer MiMalloc memory allocator for all endpoints in
the workspace.
Change-Id: Ic60237284ed168e46ec6e8f28e2710bae4385c6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12149
Tested-by: BuildkiteCI
Reviewed-by: aspen <root@gws.fyi>
|
|
Per https://nnethercote.github.io/perf-book/hashing.html, we have
basically no reason to use the default hasher over a faster,
non-DoS-resistant hasher. This gives a nice perf boost basically for
free:
hello outpath time: [704.76 ms 714.91 ms 725.63 ms]
change: [-7.2391% -6.1018% -4.9189%] (p = 0.00 < 0.05)
Performance has improved.
Change-Id: If5587f444ed3af69f8af4eead6af3ea303b4ae68
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12046
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Autosubmit: aspen <root@gws.fyi>
|
|
whoops
Change-Id: I5f24163c276992c7858b038ae2bb636da75f3f91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12043
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
|
|
Change-Id: I7cab29ecfa1823c2103b4c47b7d784bc31459d55
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12008
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: yuka <yuka@yuka.dev>
|
|
Change-Id: Ie6290b296baba2b987f1a61c9bb4c78549ac11f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11983
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
|
|
Now that we can bind (potentially lazy, potentially lambda-containing)
values in the REPL and then reference them in subsequent evaluations,
it's important that the values to which we construct shared references
are shared across those subsequent evaluations - otherwise, we get
panics due to unknown source map locations, or dropped weak references
to globals.
This change assigns both the globals and the source map as fields on the
Repl after the first evaluation, and then passes those in (to the
EvaluationBuilder) on subsequent evaluations.
On the EvaluationBuilder side, there's some panicking introduced - this
is intentional, as my intent is for the builder to be configured
statically enough that panicking is the best way to report errors
here (it's always a bug to misconfigure an Evaluation, and we'd never
want to handle it dynamically).
Change-Id: I37225697235c22b683ca48a17d30fa8fedd12d1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11960
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
|
|
Juggle around the internals of the tvix-cli crate so that we expose the
Repl as a public type with a `send` method, that sends a string to the
repl and *captures all output* so that it can be subsequently asserted
on in tests. Then, demonstrate that this works with a single (for now)
REPL test using expect-test to assert on the output of a single command
sent to the REPL.
As the REPL gets more complicated, this will allow us to make tests that
cover that complex behavior.
Change-Id: I88175bd72d8760c79faade95ebb1d956f08a7b83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11958
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Make constructing of a new Evaluation use the builder pattern rather
than setting public mutable fields. This is currently a pure
refactor (no functionality has changed) but has a few advantages:
- We've encapsulated the internals of the fields in Evaluation, meaning
we can change them without too much breakage of clients
- We have type safety that prevents us from ever changing the fields of
an Evaluation after it's built (which matters more in a world where we
reuse Evaluations).
More importantly, this paves the road for doing different things with
the construction of an Evaluation - notably, sharing certain things like
the GlobalsMap across subsequent evaluations in eg the REPL.
Fixes: b/262
Change-Id: I4a27116faac14cdd144fc7c992d14ae095a1aca4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11956
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Allow binding variables at the REPL's toplevel in the same way the Nix
REPL does, using the syntax <ident> = <expr>. This fully, strictly
evaluates the value and sets it in the repl's "env", which gets passed
in at the toplevel when evaluating expressions.
The laziness behavior differs from Nix's, but I think this is good:
❯ nix repl
Welcome to Nix version 2.3.18. Type :? for help.
nix-repl> x = builtins.trace "x" 1
nix-repl> x
trace: x
1
nix-repl> x
1
vs tvix:
tvix-repl> x = builtins.trace "x" 1
trace: "x" :: string
tvix-repl> x
=> 1 :: int
tvix-repl> x
=> 1 :: int
Bug: https://b.tvl.fyi/issues/371
Change-Id: Ieb2d626b7195fa87be638c9a4dae2eee45eb9ab1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11954
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
|
|
Disable the progressbar on default and provide a interface for
optionally enabling the progressbar.
Change-Id: I0e31b1957e80cf64a8dcf65c6ceb3713975b8220
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11861
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
|
|
Provide a new interface for forcing a flush of otlp traces and use this
interface to shutdown otlp prior to exiting tvix-store, either if the
tool was stopped with a SIGTERM or ended regularly.
This also fixes an issue where traces were not even exported if for
example we just imported 10 paths and never even emitted more than 256
traces. The implementation uses a mpsc channel so a flush can be done
without having to wait for it to complete. If you want to wait for a
flush to complete you can provide a oneshot channel which will receive a
message once flushing is complete.
Because of a otlp bug `force_flush` as well as
`shutdown_tracer_provider` need to be executed using `spawn_blocking`
otherwise the function will deadlock. See
https://github.com/open-telemetry/opentelemetry-rust/issues/1395#issuecomment-1953280335
Change-Id: I0a828391adfb1f72dc8305f62ced8cba0515847c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11803
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
|
|
This gives some better feedback something is going on, gives a (named)
root for all the progress children we're drawing, and also counts the
time we are in eval.
Change-Id: Ibe81dcebf0a2b59bb0680da62e206eb5270f9d3c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11798
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: aspen <root@gws.fyi>
|
|
Introduce a new common crate that contains tracing boilerplate which then
can be used in the cli, tvix-store and tvix-build crates.
It has otlp as an optional feature, which is currently only used by
tvix-store.
Change-Id: I41468ac4d9c65174515d721513b96fea463d6ed2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11758
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
|
|
Switch tvix to using jemalloc as the default global allocator on
supported (eg, non-msvc) platforms. This gives a pretty reasonable
performance boost basically for free:
int time: [24.361 µs 24.386 µs 24.418 µs]
change: [-19.355% -18.859% -18.527%] (p = 0.00 < 0.05)
Performance has improved.
merge small attrs time: [37.201 µs 37.328 µs 37.442 µs]
change: [-24.609% -24.266% -23.982%] (p = 0.00 < 0.05)
Performance has improved.
merge large attrs with small attrs
time: [20.030 ms 20.135 ms 20.251 ms]
change: [-4.2811% -3.2549% -2.3807%] (p = 0.00 < 0.05)
Performance has improved.
hello outpath time: [967.91 ms 974.07 ms 983.33 ms]
change: [-5.5008% -4.4552% -3.4099%] (p = 0.00 < 0.05)
Performance has improved.
Change-Id: I6c6e6e3295ec2fca01ea28dc37bcb201cd811767
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10851
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Add a command, :p, to evaluate an expression and recursively print the
result, as if `--strict` had been passed on the command line.
Demonstration of this working:
❯ cargo r --bin tvix
Finished dev [unoptimized + debuginfo] target(s) in 0.27s
Running `target/debug/tvix`
tvix-repl> { x = (x: x) 1; }
=> { x = <CODE>; } :: set
tvix-repl> :p { x = (x: x) 1; }
=> { x = 1; } :: set
Change-Id: I1a81d7481160c30d2a4483c6308e25fa45f2dfdf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11738
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Add a command to display help for the REPL, which can be either :? or
:h.
Change-Id: Ifdfd8c31130ca5afcde05a4c4276b768eb54c06f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11737
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: Ib3b314b21f4d8c30bfd674e79771179d51d4f2e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11736
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Prepare for introducing additional REPL commands by splitting out
the *parsing* of the repl commands, which returns a new ReplCommand
type, from the actual *handling* of the commands.
Change-Id: If81a53c1e2d90204d26ce3bb2ea9eebf7bb3fd51
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11734
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
In preparation for adding some new functionality to the tvix REPL, break
it out into its own module.
Change-Id: I4fb78320e92562e3474a3724536cb22c1d893e57
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11733
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Transparently support multiline input in the Tvix REPL, by handling the
UnexpectedEOF error returned by the parser and using it to progressively
build up an input expr over multiple iterations of the REPL's outer
loop.
This works quite nicely:
❯ cargo r --bin tvix
Compiling tvix-cli v0.1.0 (/home/aspen/code/depot/tvix/cli)
Finished dev [unoptimized + debuginfo] target(s) in 1.72s
Running `target/debug/tvix`
tvix-repl> { foo
> =
> 1;
> }
=> { foo = 1; } :: set
<press up arrow>
tvix-repl> { foo
=
1;
}
=> { foo = 1; } :: set
Change-Id: Ib0ed4766b13e8231d696cdc27281ac158e20a777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11732
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This shouldn't be part of the PathInfoService trait.
Pretty much none of the PathInfoServices do implement it, and requiring
them to implement it means they also cannot make use of this calculation
already being done by other PathInfoServices.
Move it out into its own NarCalculationService trait, defined somewhere
at tvix_store::nar, and have everyone who wants to trigger nar
calculation use nar_calculation_service directly, which now is an
additional field in TvixStoreIO for example.
It being moved outside the PathInfoService trait doesn't prohibit
specific implementations to implement it (like the GRPC client for the
`PathInfoService` does.
This is currently wired together in a bit of a hacky fashion - as of
now, everything uses the naive implementation that traverses blob and
directoryservice, rather than composing it properly. I want to leave
that up to a later CL, dealing with other parts of store composition
too.
Change-Id: I18d07ea4301d4a07651b8218bc5fe95e4e307208
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11619
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This specifically allows subsequent fetch calls in the REPL to avoid
fetching the same path twice (because they share the same
PathInfoService).
Change-Id: Ieda089080174913a8c014f13d6852cac599a7e17
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11484
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
|
|
This brings feature parity with the tvix-store CLI command, at least as
far as logging (not tracing) is concerned.
Alternative to cl/11482, RUST_LOG seems to be the more canonical way to
influence this, and is consistent with how it's done in tvix-store.
Change-Id: I923a0b0ae55dc49af7efdacdcf5b1f24e561b3c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11527
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
|
|
This reverts commit d9565a4d0af3bffd735a77aa6f1fd0ec0e03b14a.
Reason for revert: this was intentional - putting Rc::clone instead of
.clone is a common Rust idiom, and makes it explicit that we're cloning
a shared reference, not an underlying resource
Change-Id: I41a5f323ee35d7025dc7bb02f7d5d05d0051798d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10995
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
We add a new set of builtins called `import_builtins`, which
will contain import-related builtins, such as `builtins.path` and
`builtins.filterSource`. Both can import paths into the store, with
various knobs to alter the result, e.g. filtering, renaming, expected
hashes.
We introduce `filtered_ingest` which will drive the filtered ingestion
via the Nix function via the generator machinery, and then we register
the root node to the path info service inside the store.
`builtins.filterSource` is very simple, `builtins.path` is a more
complicated model requiring the same logic albeit more sophisticated
with name customization, file ingestion method and expected SHA-256.
Change-Id: I1083f37808b35f7b37818c8ffb9543d9682b2de2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10654
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
All these functions have an Rc of Rc<TvixStoreIO> or Rc<dyn StoreIO>, so
we can call io.clone() directly.
Change-Id: I96a5bcb9af4aca93892cb72bcfaf14540da52381
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10989
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Makes use of the SourceCode field now being stored directly in
errors (see parent CL). With this change, the default `Display`
implementation can now format errors correctly, and there is no need
to keep a `SourceCode` around just for error formatting.
Updates dependent crates (CLI, serde, tvixbolt) to use this correctly.
Change-Id: Iddc5d7a6b4bab391f30a999e4c68aca34304c059
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10987
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Initialize a new empty builtins module `fetcher_builtins`, which will
contain the builtins which fetch URLs from the internet:
* fetchurl
* fetchGit
* fetchTarball
* fetchTree (maybe? this is experimental)
These builtins are all implemented in CPP nix at:
https://github.com/NixOS/nix/blob/2.20.2/src/libexpr/primops/fetchTree.cc
These builtins are added to the evaluation context using a similar
mechanism to the derivation builtins, and have been added everywhere
derivation builtins were previously being added.
Change-Id: I133b91cc9560f23028621414537f712e7bd8a825
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10974
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
No otlp yet, this simply gives us structured log output and a cli
argument for the log level.
Change-Id: Ifaa60bae419640e92baebb6ee59eedd775c769c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10853
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
Allow using a BUILD_SERVICE_ADDR env var, or cmdline args to configure
it. Still default to the dummy implementation.
Change-Id: I68f34f7b09eabef2b0491103857bbc798398ebfc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10846
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
C++ nix uses C-style zero-terminated char pointers to represent strings
internally - however, up to this point, tvix has used Rust `String` and
`str` for string values. Since those are required to be valid utf-8, we
haven't been able to properly represent all the string values that Nix
supports.
To fix that, this change converts the internal representation of the
NixString struct from `Box<str>` to `BString`, from the `bstr` crate -
this is a wrapper around a `Vec<u8>` with extra functions for treating
that byte vector as a "morally string-like" value, which is basically
exactly what we need.
Since this changes a pretty fundamental assumption about a pretty core
type, there are a *lot* of changes in a lot of places to make this work,
but I've tried to keep the general philosophy and intent of most of the
code in most places intact. Most notably, there's nothing that's been
done to make the derivation stuff in //tvix/glue work with non-utf8
strings everywhere, instead opting to just convert to String/str when
passing things into that - there *might* be something to be done there,
but I don't know what the rules should be and I don't want to figure
them out in this change.
To deal with OS-native paths in a way that also works in WASM for
tvixbolt, this also adds a dependency on the "os_str_bytes" crate.
Fixes: b/189
Fixes: b/337
Change-Id: I5e6eb29c62f47dd91af954f5e12bfc3d186f5526
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10200
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
|
|
Add a new --trace-runtime-timing flag (probably a better bikeshed for
this) that enables capturing the time, relative to the last event, of
each event recorded with the tracing observer.
This probably isn't *super* useful yet, but I'd like to start here in
adding new profiling tools to the VM, specifically based on the runtime
observer
Change-Id: Id7f12077291c39bf3eef42ab6744bfba53687a65
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10713
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
TvixStoreIO triggers builds whenever IO into a not-yet-built store path
is requested, if it knows how to build that path.
Change-Id: If30e9db6be2f2a30cbc9d0576f357f3ecfa0d35a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10645
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
We propagate a `TvixStoreIO` as the `state` of our derivation-specific
builtins in the glue crate.
The evaluators `io_handle` itself is using a Rc<dyn EvalIO>.
An earlier version of TvixStoreIO was also introducing generics over the
different internal services themselves, but we opted for instead
hardcoding this to Arc<dyn …> for the sake of less macro voodoo.
Change-Id: I535c476f06b840858fa3070c4a237ece47f7a15b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10636
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
We don't need to spawn in all these places, we can just block_on
directly, this is all IO bound.
This also means, we don't need to clone any of the service handles
(except preserving clone-ability of the BlobService).
Change-Id: I7d90f4d6a263a98491caa071ada538a5197a5472
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10540
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Raw printing will transform the result into a string
and print it.
In case of a contextful string, this will fail by default, as expected.
Change-Id: I5e564329e7b001adc57a77a9153b4425cb332bb7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10457
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
We calculate the input context by performing the union of context
over all input of the derivation.
Then, we just pass the rest of it to the remaining machinery.
Finally, we re-emit an `outPath` and a `drvPath` containing the expected
contexts.
Change-Id: I74905fb258b5bee8b08d1208c9eb87f51b92a890
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10436
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This takes three URLs, and constructs Arc'ed
{Blob,Directory,PathInfo}Service, allowing to remove some of the
boilerplate.
Change-Id: I40e7c2b551442ef2acdc543dfc87ab97e7c742bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10484
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
While we currently mostly use it in an Arc, as we need to clone it
inside PathInfoService, there might be other usecases not requiring it
to be Clone.
Change-Id: Ia05bb370340792a048e2036be30e285ef1e63870
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10483
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
While we currently mostly use it in an Arc, as we need to clone it
inside PathInfoService, there might be other usecases not requiring it
to be Clone.
Change-Id: I7bd337cd2e4c2d4154b385461eefa62c9b78345d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10482
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
At some point, tvix-cli needs to talk to the outside world to persist
things into a real store.
Introduce the same CLI options to configure
{Blob,Directory,PathInfo}Service URLs.
We need to be a bit careful with how we set up stores, and make
this separate from setting up TvixStoreIO, as it's holding a
Rc<RefCell<KnonPath>> which not Send.
At some point, we might make this a Arc<RwLock<_>> later anyways, and
then this can be simplified a bit, but for now, this is sufficient.
Change-Id: I87d84ca3a10ce947e194ff985073791469773f35
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10474
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
Instead, it's passed in the evaluate/compile_only functions, which feels
more naturally. It lets us set up the Evaluation struct long before
we actually feed it with data to evaluate.
Now that Evaluation::new() would be accepting an empty list of
arguments, we can simply implement Default, making things a bit more
idiomatic.
Change-Id: I4369658634909a0c504fdffa18242a130daa0239
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10475
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
|
|
Change-Id: I25b7197458dbfbde8623545dc0a0286eb2744f10
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9911
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Change-Id: I2327560c4cf0d3f90e253e3c2f47cb29c762461e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9910
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
There's various bits and pieces in tvix-cli that use both the store and
evaluator, as well as nix-compat. For example, builtins.derivation, as
well as the reference scanning implementation.
This "glue code" currently isn't accessible from anywhere else, but it'd
be very useful if it were.
Move it out into a `glue` crate, and make `tvix-cli` a consumer of it.
All the KnownPaths setup and passing around, as well as NIX_PATH
handling is also something that should probably be moved into the glue
crate as well, but that's something left for a future CL.
Change-Id: I080ed3d1825ab23790666486840f301f00856277
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9908
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Change-Id: I62cbe883afcf3dd0c8d4de0e3b845069eb750c97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9855
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
The `if let` wasn't matching `outputHashAlgo` being unset, and didn't
populate it in that case.
Port the remaining commented-out testcases over to nix-lang based tests.
Change-Id: I140b5643b9ed9d29f9522ec65d98d0b12262d728
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9825
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
