diff options
Diffstat (limited to 'third_party/nix/doc/manual/expressions/language-constructs.xml')
| -rw-r--r-- | third_party/nix/doc/manual/expressions/language-constructs.xml | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/third_party/nix/doc/manual/expressions/language-constructs.xml b/third_party/nix/doc/manual/expressions/language-constructs.xml new file mode 100644 index 0000000000..0d0cbbe155 --- /dev/null +++ b/third_party/nix/doc/manual/expressions/language-constructs.xml @@ -0,0 +1,409 @@ +<section xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-constructs"> + +<title>Language Constructs</title> + +<simplesect><title>Recursive sets</title> + +<para>Recursive sets are just normal sets, but the attributes can +refer to each other. For example, + +<programlisting> +rec { + x = y; + y = 123; +}.x +</programlisting> + +evaluates to <literal>123</literal>. Note that without +<literal>rec</literal> the binding <literal>x = y;</literal> would +refer to the variable <varname>y</varname> in the surrounding scope, +if one exists, and would be invalid if no such variable exists. That +is, in a normal (non-recursive) set, attributes are not added to the +lexical scope; in a recursive set, they are.</para> + +<para>Recursive sets of course introduce the danger of infinite +recursion. For example, + +<programlisting> +rec { + x = y; + y = x; +}.x</programlisting> + +does not terminate<footnote><para>Actually, Nix detects infinite +recursion in this case and aborts (<quote>infinite recursion +encountered</quote>).</para></footnote>.</para> + +</simplesect> + + +<simplesect xml:id="sect-let-expressions"><title>Let-expressions</title> + +<para>A let-expression allows you to define local variables for an +expression. For instance, + +<programlisting> +let + x = "foo"; + y = "bar"; +in x + y</programlisting> + +evaluates to <literal>"foobar"</literal>. + +</para> + +</simplesect> + + +<simplesect><title>Inheriting attributes</title> + +<para>When defining a set or in a let-expression it is often convenient to copy variables +from the surrounding lexical scope (e.g., when you want to propagate +attributes). This can be shortened using the +<literal>inherit</literal> keyword. For instance, + +<programlisting> +let x = 123; in +{ inherit x; + y = 456; +}</programlisting> + +is equivalent to + +<programlisting> +let x = 123; in +{ x = x; + y = 456; +}</programlisting> + +and both evaluate to <literal>{ x = 123; y = 456; }</literal>. (Note that +this works because <varname>x</varname> is added to the lexical scope +by the <literal>let</literal> construct.) It is also possible to +inherit attributes from another set. For instance, in this fragment +from <filename>all-packages.nix</filename>, + +<programlisting> + graphviz = (import ../tools/graphics/graphviz) { + inherit fetchurl stdenv libpng libjpeg expat x11 yacc; + inherit (xlibs) libXaw; + }; + + xlibs = { + libX11 = ...; + libXaw = ...; + ... + } + + libpng = ...; + libjpg = ...; + ...</programlisting> + +the set used in the function call to the function defined in +<filename>../tools/graphics/graphviz</filename> inherits a number of +variables from the surrounding scope (<varname>fetchurl</varname> +... <varname>yacc</varname>), but also inherits +<varname>libXaw</varname> (the X Athena Widgets) from the +<varname>xlibs</varname> (X11 client-side libraries) set.</para> + +<para> +Summarizing the fragment + +<programlisting> +... +inherit x y z; +inherit (src-set) a b c; +...</programlisting> + +is equivalent to + +<programlisting> +... +x = x; y = y; z = z; +a = src-set.a; b = src-set.b; c = src-set.c; +...</programlisting> + +when used while defining local variables in a let-expression or +while defining a set.</para> + +</simplesect> + + +<simplesect xml:id="ss-functions"><title>Functions</title> + +<para>Functions have the following form: + +<programlisting> +<replaceable>pattern</replaceable>: <replaceable>body</replaceable></programlisting> + +The pattern specifies what the argument of the function must look +like, and binds variables in the body to (parts of) the +argument. There are three kinds of patterns:</para> + +<itemizedlist> + + + <listitem><para>If a pattern is a single identifier, then the + function matches any argument. Example: + + <programlisting> +let negate = x: !x; + concat = x: y: x + y; +in if negate true then concat "foo" "bar" else ""</programlisting> + + Note that <function>concat</function> is a function that takes one + argument and returns a function that takes another argument. This + allows partial parameterisation (i.e., only filling some of the + arguments of a function); e.g., + + <programlisting> +map (concat "foo") [ "bar" "bla" "abc" ]</programlisting> + + evaluates to <literal>[ "foobar" "foobla" + "fooabc" ]</literal>.</para></listitem> + + + <listitem><para>A <emphasis>set pattern</emphasis> of the form + <literal>{ name1, name2, …, nameN }</literal> matches a set + containing the listed attributes, and binds the values of those + attributes to variables in the function body. For example, the + function + +<programlisting> +{ x, y, z }: z + y + x</programlisting> + + can only be called with a set containing exactly the attributes + <varname>x</varname>, <varname>y</varname> and + <varname>z</varname>. No other attributes are allowed. If you want + to allow additional arguments, you can use an ellipsis + (<literal>...</literal>): + +<programlisting> +{ x, y, z, ... }: z + y + x</programlisting> + + This works on any set that contains at least the three named + attributes.</para> + + <para>It is possible to provide <emphasis>default values</emphasis> + for attributes, in which case they are allowed to be missing. A + default value is specified by writing + <literal><replaceable>name</replaceable> ? + <replaceable>e</replaceable></literal>, where + <replaceable>e</replaceable> is an arbitrary expression. For example, + +<programlisting> +{ x, y ? "foo", z ? "bar" }: z + y + x</programlisting> + + specifies a function that only requires an attribute named + <varname>x</varname>, but optionally accepts <varname>y</varname> + and <varname>z</varname>.</para></listitem> + + + <listitem><para>An <literal>@</literal>-pattern provides a means of referring + to the whole value being matched: + +<programlisting> args@{ x, y, z, ... }: z + y + x + args.a</programlisting> + +but can also be written as: + +<programlisting> { x, y, z, ... } @ args: z + y + x + args.a</programlisting> + + Here <varname>args</varname> is bound to the entire argument, which + is further matched against the pattern <literal>{ x, y, z, + ... }</literal>. <literal>@</literal>-pattern makes mainly sense with an + ellipsis(<literal>...</literal>) as you can access attribute names as + <literal>a</literal>, using <literal>args.a</literal>, which was given as an + additional attribute to the function. + </para> + + <warning> + <para> + The <literal>args@</literal> expression is bound to the argument passed to the function which + means that attributes with defaults that aren't explicitly specified in the function call + won't cause an evaluation error, but won't exist in <literal>args</literal>. + </para> + <para> + For instance +<programlisting> +let + function = args@{ a ? 23, ... }: args; +in + function {} +</programlisting> + will evaluate to an empty attribute set. + </para> + </warning></listitem> + +</itemizedlist> + +<para>Note that functions do not have names. If you want to give them +a name, you can bind them to an attribute, e.g., + +<programlisting> +let concat = { x, y }: x + y; +in concat { x = "foo"; y = "bar"; }</programlisting> + +</para> + +</simplesect> + + +<simplesect><title>Conditionals</title> + +<para>Conditionals look like this: + +<programlisting> +if <replaceable>e1</replaceable> then <replaceable>e2</replaceable> else <replaceable>e3</replaceable></programlisting> + +where <replaceable>e1</replaceable> is an expression that should +evaluate to a Boolean value (<literal>true</literal> or +<literal>false</literal>).</para> + +</simplesect> + + +<simplesect><title>Assertions</title> + +<para>Assertions are generally used to check that certain requirements +on or between features and dependencies hold. They look like this: + +<programlisting> +assert <replaceable>e1</replaceable>; <replaceable>e2</replaceable></programlisting> + +where <replaceable>e1</replaceable> is an expression that should +evaluate to a Boolean value. If it evaluates to +<literal>true</literal>, <replaceable>e2</replaceable> is returned; +otherwise expression evaluation is aborted and a backtrace is printed.</para> + +<example xml:id='ex-subversion-nix'><title>Nix expression for Subversion</title> +<programlisting> +{ localServer ? false +, httpServer ? false +, sslSupport ? false +, pythonBindings ? false +, javaSwigBindings ? false +, javahlBindings ? false +, stdenv, fetchurl +, openssl ? null, httpd ? null, db4 ? null, expat, swig ? null, j2sdk ? null +}: + +assert localServer -> db4 != null; <co xml:id='ex-subversion-nix-co-1' /> +assert httpServer -> httpd != null && httpd.expat == expat; <co xml:id='ex-subversion-nix-co-2' /> +assert sslSupport -> openssl != null && (httpServer -> httpd.openssl == openssl); <co xml:id='ex-subversion-nix-co-3' /> +assert pythonBindings -> swig != null && swig.pythonSupport; +assert javaSwigBindings -> swig != null && swig.javaSupport; +assert javahlBindings -> j2sdk != null; + +stdenv.mkDerivation { + name = "subversion-1.1.1"; + ... + openssl = if sslSupport then openssl else null; <co xml:id='ex-subversion-nix-co-4' /> + ... +}</programlisting> +</example> + +<para><xref linkend='ex-subversion-nix' /> show how assertions are +used in the Nix expression for Subversion.</para> + +<calloutlist> + + <callout arearefs='ex-subversion-nix-co-1'> + <para>This assertion states that if Subversion is to have support + for local repositories, then Berkeley DB is needed. So if the + Subversion function is called with the + <varname>localServer</varname> argument set to + <literal>true</literal> but the <varname>db4</varname> argument + set to <literal>null</literal>, then the evaluation fails.</para> + </callout> + + <callout arearefs='ex-subversion-nix-co-2'> + <para>This is a more subtle condition: if Subversion is built with + Apache (<literal>httpServer</literal>) support, then the Expat + library (an XML library) used by Subversion should be same as the + one used by Apache. This is because in this configuration + Subversion code ends up being linked with Apache code, and if the + Expat libraries do not match, a build- or runtime link error or + incompatibility might occur.</para> + </callout> + + <callout arearefs='ex-subversion-nix-co-3'> + <para>This assertion says that in order for Subversion to have SSL + support (so that it can access <literal>https</literal> URLs), an + OpenSSL library must be passed. Additionally, it says that + <emphasis>if</emphasis> Apache support is enabled, then Apache's + OpenSSL should match Subversion's. (Note that if Apache support + is not enabled, we don't care about Apache's OpenSSL.)</para> + </callout> + + <callout arearefs='ex-subversion-nix-co-4'> + <para>The conditional here is not really related to assertions, + but is worth pointing out: it ensures that if SSL support is + disabled, then the Subversion derivation is not dependent on + OpenSSL, even if a non-<literal>null</literal> value was passed. + This prevents an unnecessary rebuild of Subversion if OpenSSL + changes.</para> + </callout> + +</calloutlist> + +</simplesect> + + + +<simplesect><title>With-expressions</title> + +<para>A <emphasis>with-expression</emphasis>, + +<programlisting> +with <replaceable>e1</replaceable>; <replaceable>e2</replaceable></programlisting> + +introduces the set <replaceable>e1</replaceable> into the lexical +scope of the expression <replaceable>e2</replaceable>. For instance, + +<programlisting> +let as = { x = "foo"; y = "bar"; }; +in with as; x + y</programlisting> + +evaluates to <literal>"foobar"</literal> since the +<literal>with</literal> adds the <varname>x</varname> and +<varname>y</varname> attributes of <varname>as</varname> to the +lexical scope in the expression <literal>x + y</literal>. The most +common use of <literal>with</literal> is in conjunction with the +<function>import</function> function. E.g., + +<programlisting> +with (import ./definitions.nix); ...</programlisting> + +makes all attributes defined in the file +<filename>definitions.nix</filename> available as if they were defined +locally in a <literal>let</literal>-expression.</para> + +<para>The bindings introduced by <literal>with</literal> do not shadow bindings +introduced by other means, e.g. + +<programlisting> +let a = 3; in with { a = 1; }; let a = 4; in with { a = 2; }; ...</programlisting> + +establishes the same scope as + +<programlisting> +let a = 1; in let a = 2; in let a = 3; in let a = 4; in ...</programlisting> + +</para> + +</simplesect> + + +<simplesect><title>Comments</title> + +<para>Comments can be single-line, started with a <literal>#</literal> +character, or inline/multi-line, enclosed within <literal>/* +... */</literal>.</para> + +</simplesect> + + +</section> |