diff options
Diffstat (limited to 'third_party/git/t/test-lib-functions.sh')
| -rw-r--r-- | third_party/git/t/test-lib-functions.sh | 232 |
1 files changed, 209 insertions, 23 deletions
diff --git a/third_party/git/t/test-lib-functions.sh b/third_party/git/t/test-lib-functions.sh index e0b3f28d3a..8d59b90348 100644 --- a/third_party/git/t/test-lib-functions.sh +++ b/third_party/git/t/test-lib-functions.sh @@ -228,9 +228,11 @@ test_commit () { # can be a tag pointing to the commit-to-merge. test_merge () { + label="$1" && + shift && test_tick && - git merge -m "$1" "$2" && - git tag "$1" + git merge -m "$label" "$@" && + git tag "$label" } # Efficiently create <nr> commits, each with a unique number (from 1 to <nr> @@ -306,7 +308,7 @@ test_commit_bulk () { total=$1 add_from= - if git -C "$indir" rev-parse --verify "$ref" + if git -C "$indir" rev-parse --quiet --verify "$ref" then add_from=t fi @@ -580,7 +582,7 @@ test_expect_failure () { export test_prereq if ! test_skip "$@" then - say >&3 "checking known breakage: $2" + say >&3 "checking known breakage of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" expecting_failure then test_known_broken_ok_ "$1" @@ -600,7 +602,7 @@ test_expect_success () { export test_prereq if ! test_skip "$@" then - say >&3 "expecting success: $2" + say >&3 "expecting success of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" then test_ok_ "$1" @@ -796,6 +798,37 @@ list_contains () { return 1 } +# Returns success if the arguments indicate that a command should be +# accepted by test_must_fail(). If the command is run with env, the env +# and its corresponding variable settings will be stripped before we +# test the command being run. +test_must_fail_acceptable () { + if test "$1" = "env" + then + shift + while test $# -gt 0 + do + case "$1" in + *?=*) + shift + ;; + *) + break + ;; + esac + done + fi + + case "$1" in + git|__git*|test-tool|test_terminal) + return 0 + ;; + *) + return 1 + ;; + esac +} + # This is not among top-level (test_expect_success | test_expect_failure) # but is a prefix that can be used in the test script, like: # @@ -815,6 +848,17 @@ list_contains () { # Multiple signals can be specified as a comma separated list. # Currently recognized signal names are: sigpipe, success. # (Don't use 'success', use 'test_might_fail' instead.) +# +# Do not use this to run anything but "git" and other specific testable +# commands (see test_must_fail_acceptable()). We are not in the +# business of vetting system supplied commands -- in other words, this +# is wrong: +# +# test_must_fail grep pattern output +# +# Instead use '!': +# +# ! grep pattern output test_must_fail () { case "$1" in @@ -826,6 +870,11 @@ test_must_fail () { _test_ok= ;; esac + if ! test_must_fail_acceptable "$@" + then + echo >&7 "test_must_fail: only 'git' is allowed: $*" + return 1 + fi "$@" 2>&7 exit_code=$? if test $exit_code -eq 0 && ! list_contains "$_test_ok" success @@ -903,7 +952,13 @@ test_expect_code () { # - not all diff versions understand "-u" test_cmp() { - $GIT_TEST_CMP "$@" + test $# -eq 2 || BUG "test_cmp requires two arguments" + if ! eval "$GIT_TEST_CMP" '"$@"' + then + test "x$1" = x- || test -e "$1" || BUG "test_cmp '$1' missing" + test "x$2" = x- || test -e "$2" || BUG "test_cmp '$2' missing" + return 1 + fi } # Check that the given config key has the expected value. @@ -932,7 +987,13 @@ test_cmp_config() { # test_cmp_bin - helper to compare binary files test_cmp_bin() { - cmp "$@" + test $# -eq 2 || BUG "test_cmp_bin requires two arguments" + if ! cmp "$@" + then + test "x$1" = x- || test -e "$1" || BUG "test_cmp_bin '$1' missing" + test "x$2" = x- || test -e "$2" || BUG "test_cmp_bin '$2' missing" + return 1 + fi } # Use this instead of test_cmp to compare files that contain expected and @@ -1010,19 +1071,30 @@ test_must_be_empty () { fi } -# Tests that its two parameters refer to the same revision +# Tests that its two parameters refer to the same revision, or if '!' is +# provided first, that its other two parameters refer to different +# revisions. test_cmp_rev () { + local op='=' wrong_result=different + + if test $# -ge 1 && test "x$1" = 'x!' + then + op='!=' + wrong_result='the same' + shift + fi if test $# != 2 then error "bug in the test script: test_cmp_rev requires two revisions, but got $#" else local r1 r2 r1=$(git rev-parse --verify "$1") && - r2=$(git rev-parse --verify "$2") && - if test "$r1" != "$r2" + r2=$(git rev-parse --verify "$2") || return 1 + + if ! test "$r1" "$op" "$r2" then cat >&4 <<-EOF - error: two revisions point to different objects: + error: two revisions point to $wrong_result objects: '$1': $r1 '$2': $r2 EOF @@ -1173,6 +1245,34 @@ perl () { command "$PERL_PATH" "$@" 2>&7 } 7>&2 2>&4 +# Given the name of an environment variable with a bool value, normalize +# its value to a 0 (true) or 1 (false or empty string) return code. +# +# test_bool_env GIT_TEST_HTTPD <default-value> +# +# Return with code corresponding to the given default value if the variable +# is unset. +# Abort the test script if either the value of the variable or the default +# are not valid bool values. + +test_bool_env () { + if test $# != 2 + then + BUG "test_bool_env requires two parameters (variable name and default value)" + fi + + git env--helper --type=bool --default="$2" --exit-code "$1" + ret=$? + case $ret in + 0|1) # unset or valid bool value + ;; + *) # invalid bool value or something unexpected + error >&7 "test_bool_env requires bool values both for \$$1 and for the default fallback" + ;; + esac + return $ret +} + # Exit the test suite, either by skipping all remaining tests or by # exiting with an error. If our prerequisite variable $1 falls back # on a default assume we were opportunistically trying to set up some @@ -1181,7 +1281,7 @@ perl () { # The error/skip message should be given by $2. # test_skip_or_die () { - if ! git env--helper --type=bool --default=false --exit-code $1 + if ! test_bool_env "$1" false then skip_all=$2 test_done @@ -1321,14 +1421,22 @@ nongit () { ) } 7>&2 2>&4 -# convert stdin to pktline representation; note that empty input becomes an -# empty packet, not a flush packet (for that you can just print 0000 yourself). +# convert function arguments or stdin (if not arguments given) to pktline +# representation. If multiple arguments are given, they are separated by +# whitespace and put in a single packet. Note that data containing NULs must be +# given on stdin, and that empty input becomes an empty packet, not a flush +# packet (for that you can just print 0000 yourself). packetize() { - cat >packetize.tmp && - len=$(wc -c <packetize.tmp) && - printf '%04x%s' "$(($len + 4))" && - cat packetize.tmp && - rm -f packetize.tmp + if test $# -gt 0 + then + packet="$*" + printf '%04x%s' "$((4 + ${#packet}))" "$packet" + else + perl -e ' + my $packet = do { local $/; <STDIN> }; + printf "%04x%s", 4 + length($packet), $packet; + ' + fi } # Parse the input as a series of pktlines, writing the result to stdout. @@ -1368,9 +1476,7 @@ test_set_hash () { # Detect the hash algorithm in use. test_detect_hash () { - # Currently we only support SHA-1, but in the future this function will - # actually detect the algorithm in use. - test_hash_algo='sha1' + test_hash_algo="${GIT_TEST_DEFAULT_HASH:-sha1}" } # Load common hash metadata and common placeholder object IDs for use with @@ -1419,7 +1525,17 @@ test_oid_cache () { # Look up a per-hash value based on a key ($1). The value must have been loaded # by test_oid_init or test_oid_cache. test_oid () { - local var="test_oid_${test_hash_algo}_$1" && + local algo="${test_hash_algo}" && + + case "$1" in + --hash=*) + algo="${1#--hash=}" && + shift;; + *) + ;; + esac && + + local var="test_oid_${algo}_$1" && # If the variable is unset, we must be missing an entry for this # key-hash pair, so exit with an error. @@ -1475,3 +1591,73 @@ test_set_port () { port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0})) eval $var=$port } + +# Compare a file containing rev-list bitmap traversal output to its non-bitmap +# counterpart. You can't just use test_cmp for this, because the two produce +# subtly different output: +# +# - regular output is in traversal order, whereas bitmap is split by type, +# with non-packed objects at the end +# +# - regular output has a space and the pathname appended to non-commit +# objects; bitmap output omits this +# +# This function normalizes and compares the two. The second file should +# always be the bitmap output. +test_bitmap_traversal () { + if test "$1" = "--no-confirm-bitmaps" + then + shift + elif cmp "$1" "$2" + then + echo >&2 "identical raw outputs; are you sure bitmaps were used?" + return 1 + fi && + cut -d' ' -f1 "$1" | sort >"$1.normalized" && + sort "$2" >"$2.normalized" && + test_cmp "$1.normalized" "$2.normalized" && + rm -f "$1.normalized" "$2.normalized" +} + +# Tests for the hidden file attribute on Windows +test_path_is_hidden () { + test_have_prereq MINGW || + BUG "test_path_is_hidden can only be used on Windows" + + # Use the output of `attrib`, ignore the absolute path + case "$("$SYSTEMROOT"/system32/attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} + +# Check that the given command was invoked as part of the +# trace2-format trace on stdin. +# +# test_subcommand [!] <command> <args>... < <trace> +# +# For example, to look for an invocation of "git upload-pack +# /path/to/repo" +# +# GIT_TRACE2_EVENT=event.log git fetch ... && +# test_subcommand git upload-pack "$PATH" <event.log +# +# If the first parameter passed is !, this instead checks that +# the given command was not called. +# +test_subcommand () { + local negate= + if test "$1" = "!" + then + negate=t + shift + fi + + local expr=$(printf '"%s",' "$@") + expr="${expr%,}" + + if test -n "$negate" + then + ! grep "\[$expr\]" + else + grep "\[$expr\]" + fi +} |