diff options
Diffstat (limited to 'third_party/git/compat/winansi.c')
| -rw-r--r-- | third_party/git/compat/winansi.c | 671 |
1 files changed, 0 insertions, 671 deletions
diff --git a/third_party/git/compat/winansi.c b/third_party/git/compat/winansi.c deleted file mode 100644 index cacd82c833..0000000000 --- a/third_party/git/compat/winansi.c +++ /dev/null @@ -1,671 +0,0 @@ -/* - * Copyright 2008 Peter Harris <git@peter.is-a-geek.org> - */ - -#undef NOGDI -#include "../git-compat-util.h" -#include <wingdi.h> -#include <winreg.h> -#include "win32.h" -#include "win32/lazyload.h" - -static int fd_is_interactive[3] = { 0, 0, 0 }; -#define FD_CONSOLE 0x1 -#define FD_SWAPPED 0x2 -#define FD_MSYS 0x4 - -/* - ANSI codes used by git: m, K - - This file is git-specific. Therefore, this file does not attempt - to implement any codes that are not used by git. -*/ - -static HANDLE console; -static WORD plain_attr; -static WORD attr; -static int negative; -static int non_ascii_used = 0; -static HANDLE hthread, hread, hwrite; -static HANDLE hconsole1, hconsole2; - -#ifdef __MINGW32__ -#if !defined(__MINGW64_VERSION_MAJOR) || __MINGW64_VERSION_MAJOR < 5 -typedef struct _CONSOLE_FONT_INFOEX { - ULONG cbSize; - DWORD nFont; - COORD dwFontSize; - UINT FontFamily; - UINT FontWeight; - WCHAR FaceName[LF_FACESIZE]; -} CONSOLE_FONT_INFOEX, *PCONSOLE_FONT_INFOEX; -#endif -#endif - -static void warn_if_raster_font(void) -{ - DWORD fontFamily = 0; - DECLARE_PROC_ADDR(kernel32.dll, BOOL, GetCurrentConsoleFontEx, - HANDLE, BOOL, PCONSOLE_FONT_INFOEX); - - /* don't bother if output was ascii only */ - if (!non_ascii_used) - return; - - /* GetCurrentConsoleFontEx is available since Vista */ - if (INIT_PROC_ADDR(GetCurrentConsoleFontEx)) { - CONSOLE_FONT_INFOEX cfi; - cfi.cbSize = sizeof(cfi); - if (GetCurrentConsoleFontEx(console, 0, &cfi)) - fontFamily = cfi.FontFamily; - } else { - /* pre-Vista: check default console font in registry */ - HKEY hkey; - if (ERROR_SUCCESS == RegOpenKeyExA(HKEY_CURRENT_USER, "Console", - 0, KEY_READ, &hkey)) { - DWORD size = sizeof(fontFamily); - RegQueryValueExA(hkey, "FontFamily", NULL, NULL, - (LPVOID) &fontFamily, &size); - RegCloseKey(hkey); - } - } - - if (!(fontFamily & TMPF_TRUETYPE)) { - const wchar_t *msg = L"\nWarning: Your console font probably " - L"doesn\'t support Unicode. If you experience strange " - L"characters in the output, consider switching to a " - L"TrueType font such as Consolas!\n"; - DWORD dummy; - WriteConsoleW(console, msg, wcslen(msg), &dummy, NULL); - } -} - -static int is_console(int fd) -{ - CONSOLE_SCREEN_BUFFER_INFO sbi; - DWORD mode; - HANDLE hcon; - - static int initialized = 0; - - /* get OS handle of the file descriptor */ - hcon = (HANDLE) _get_osfhandle(fd); - if (hcon == INVALID_HANDLE_VALUE) - return 0; - - /* check if its a device (i.e. console, printer, serial port) */ - if (GetFileType(hcon) != FILE_TYPE_CHAR) - return 0; - - /* check if its a handle to a console output screen buffer */ - if (!fd) { - if (!GetConsoleMode(hcon, &mode)) - return 0; - /* - * This code path is only reached if there is no console - * attached to stdout/stderr, i.e. we will not need to output - * any text to any console, therefore we might just as well - * use black as foreground color. - */ - sbi.wAttributes = 0; - } else if (!GetConsoleScreenBufferInfo(hcon, &sbi)) - return 0; - - if (fd >= 0 && fd <= 2) - fd_is_interactive[fd] |= FD_CONSOLE; - - /* initialize attributes */ - if (!initialized) { - console = hcon; - attr = plain_attr = sbi.wAttributes; - negative = 0; - initialized = 1; - } - - return 1; -} - -#define BUFFER_SIZE 4096 -#define MAX_PARAMS 16 - -static void write_console(unsigned char *str, size_t len) -{ - /* only called from console_thread, so a static buffer will do */ - static wchar_t wbuf[2 * BUFFER_SIZE + 1]; - DWORD dummy; - - /* convert utf-8 to utf-16 */ - int wlen = xutftowcsn(wbuf, (char*) str, ARRAY_SIZE(wbuf), len); - if (wlen < 0) { - wchar_t *err = L"[invalid]"; - WriteConsoleW(console, err, wcslen(err), &dummy, NULL); - return; - } - - /* write directly to console */ - WriteConsoleW(console, wbuf, wlen, &dummy, NULL); - - /* remember if non-ascii characters are printed */ - if (wlen != len) - non_ascii_used = 1; -} - -#define FOREGROUND_ALL (FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE) -#define BACKGROUND_ALL (BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE) - -static void set_console_attr(void) -{ - WORD attributes = attr; - if (negative) { - attributes &= ~FOREGROUND_ALL; - attributes &= ~BACKGROUND_ALL; - - /* This could probably use a bitmask - instead of a series of ifs */ - if (attr & FOREGROUND_RED) - attributes |= BACKGROUND_RED; - if (attr & FOREGROUND_GREEN) - attributes |= BACKGROUND_GREEN; - if (attr & FOREGROUND_BLUE) - attributes |= BACKGROUND_BLUE; - - if (attr & BACKGROUND_RED) - attributes |= FOREGROUND_RED; - if (attr & BACKGROUND_GREEN) - attributes |= FOREGROUND_GREEN; - if (attr & BACKGROUND_BLUE) - attributes |= FOREGROUND_BLUE; - } - SetConsoleTextAttribute(console, attributes); -} - -static void erase_in_line(void) -{ - CONSOLE_SCREEN_BUFFER_INFO sbi; - DWORD dummy; /* Needed for Windows 7 (or Vista) regression */ - - if (!console) - return; - - GetConsoleScreenBufferInfo(console, &sbi); - FillConsoleOutputCharacterA(console, ' ', - sbi.dwSize.X - sbi.dwCursorPosition.X, sbi.dwCursorPosition, - &dummy); -} - -static void set_attr(char func, const int *params, int paramlen) -{ - int i; - switch (func) { - case 'm': - for (i = 0; i < paramlen; i++) { - switch (params[i]) { - case 0: /* reset */ - attr = plain_attr; - negative = 0; - break; - case 1: /* bold */ - attr |= FOREGROUND_INTENSITY; - break; - case 2: /* faint */ - case 22: /* normal */ - attr &= ~FOREGROUND_INTENSITY; - break; - case 3: /* italic */ - /* Unsupported */ - break; - case 4: /* underline */ - case 21: /* double underline */ - /* Wikipedia says this flag does nothing */ - /* Furthermore, mingw doesn't define this flag - attr |= COMMON_LVB_UNDERSCORE; */ - break; - case 24: /* no underline */ - /* attr &= ~COMMON_LVB_UNDERSCORE; */ - break; - case 5: /* slow blink */ - case 6: /* fast blink */ - /* We don't have blink, but we do have - background intensity */ - attr |= BACKGROUND_INTENSITY; - break; - case 25: /* no blink */ - attr &= ~BACKGROUND_INTENSITY; - break; - case 7: /* negative */ - negative = 1; - break; - case 27: /* positive */ - negative = 0; - break; - case 8: /* conceal */ - case 28: /* reveal */ - /* Unsupported */ - break; - case 30: /* Black */ - attr &= ~FOREGROUND_ALL; - break; - case 31: /* Red */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_RED; - break; - case 32: /* Green */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_GREEN; - break; - case 33: /* Yellow */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_RED | FOREGROUND_GREEN; - break; - case 34: /* Blue */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_BLUE; - break; - case 35: /* Magenta */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_RED | FOREGROUND_BLUE; - break; - case 36: /* Cyan */ - attr &= ~FOREGROUND_ALL; - attr |= FOREGROUND_GREEN | FOREGROUND_BLUE; - break; - case 37: /* White */ - attr |= FOREGROUND_RED | - FOREGROUND_GREEN | - FOREGROUND_BLUE; - break; - case 38: /* Unknown */ - break; - case 39: /* reset */ - attr &= ~FOREGROUND_ALL; - attr |= (plain_attr & FOREGROUND_ALL); - break; - case 40: /* Black */ - attr &= ~BACKGROUND_ALL; - break; - case 41: /* Red */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_RED; - break; - case 42: /* Green */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_GREEN; - break; - case 43: /* Yellow */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_RED | BACKGROUND_GREEN; - break; - case 44: /* Blue */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_BLUE; - break; - case 45: /* Magenta */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_RED | BACKGROUND_BLUE; - break; - case 46: /* Cyan */ - attr &= ~BACKGROUND_ALL; - attr |= BACKGROUND_GREEN | BACKGROUND_BLUE; - break; - case 47: /* White */ - attr |= BACKGROUND_RED | - BACKGROUND_GREEN | - BACKGROUND_BLUE; - break; - case 48: /* Unknown */ - break; - case 49: /* reset */ - attr &= ~BACKGROUND_ALL; - attr |= (plain_attr & BACKGROUND_ALL); - break; - default: - /* Unsupported code */ - break; - } - } - set_console_attr(); - break; - case 'K': - erase_in_line(); - break; - default: - /* Unsupported code */ - break; - } -} - -enum { - TEXT = 0, ESCAPE = 033, BRACKET = '[' -}; - -static DWORD WINAPI console_thread(LPVOID unused) -{ - unsigned char buffer[BUFFER_SIZE]; - DWORD bytes; - int start, end = 0, c, parampos = 0, state = TEXT; - int params[MAX_PARAMS]; - - while (1) { - /* read next chunk of bytes from the pipe */ - if (!ReadFile(hread, buffer + end, BUFFER_SIZE - end, &bytes, - NULL)) { - /* exit if pipe has been closed or disconnected */ - if (GetLastError() == ERROR_PIPE_NOT_CONNECTED || - GetLastError() == ERROR_BROKEN_PIPE) - break; - /* ignore other errors */ - continue; - } - - /* scan the bytes and handle ANSI control codes */ - bytes += end; - start = end = 0; - while (end < bytes) { - c = buffer[end++]; - switch (state) { - case TEXT: - if (c == ESCAPE) { - /* print text seen so far */ - if (end - 1 > start) - write_console(buffer + start, - end - 1 - start); - - /* then start parsing escape sequence */ - start = end - 1; - memset(params, 0, sizeof(params)); - parampos = 0; - state = ESCAPE; - } - break; - - case ESCAPE: - /* continue if "\033[", otherwise bail out */ - state = (c == BRACKET) ? BRACKET : TEXT; - break; - - case BRACKET: - /* parse [0-9;]* into array of parameters */ - if (c >= '0' && c <= '9') { - params[parampos] *= 10; - params[parampos] += c - '0'; - } else if (c == ';') { - /* - * next parameter, bail out if out of - * bounds - */ - parampos++; - if (parampos >= MAX_PARAMS) - state = TEXT; - } else { - /* - * end of escape sequence, change - * console attributes - */ - set_attr(c, params, parampos + 1); - start = end; - state = TEXT; - } - break; - } - } - - /* print remaining text unless parsing an escape sequence */ - if (state == TEXT && end > start) { - /* check for incomplete UTF-8 sequences and fix end */ - if (buffer[end - 1] >= 0x80) { - if (buffer[end -1] >= 0xc0) - end--; - else if (end - 1 > start && - buffer[end - 2] >= 0xe0) - end -= 2; - else if (end - 2 > start && - buffer[end - 3] >= 0xf0) - end -= 3; - } - - /* print remaining complete UTF-8 sequences */ - if (end > start) - write_console(buffer + start, end - start); - - /* move remaining bytes to the front */ - if (end < bytes) - memmove(buffer, buffer + end, bytes - end); - end = bytes - end; - } else { - /* all data has been consumed, mark buffer empty */ - end = 0; - } - } - - /* check if the console font supports unicode */ - warn_if_raster_font(); - - CloseHandle(hread); - return 0; -} - -static void winansi_exit(void) -{ - /* flush all streams */ - _flushall(); - - /* signal console thread to exit */ - FlushFileBuffers(hwrite); - DisconnectNamedPipe(hwrite); - - /* wait for console thread to copy remaining data */ - WaitForSingleObject(hthread, INFINITE); - - /* cleanup handles... */ - CloseHandle(hwrite); - CloseHandle(hthread); -} - -static void die_lasterr(const char *fmt, ...) -{ - va_list params; - va_start(params, fmt); - errno = err_win_to_posix(GetLastError()); - die_errno(fmt, params); - va_end(params); -} - -#undef dup2 -int winansi_dup2(int oldfd, int newfd) -{ - int ret = dup2(oldfd, newfd); - - if (!ret && newfd >= 0 && newfd <= 2) - fd_is_interactive[newfd] = oldfd < 0 || oldfd > 2 ? - 0 : fd_is_interactive[oldfd]; - - return ret; -} - -static HANDLE duplicate_handle(HANDLE hnd) -{ - HANDLE hresult, hproc = GetCurrentProcess(); - if (!DuplicateHandle(hproc, hnd, hproc, &hresult, 0, TRUE, - DUPLICATE_SAME_ACCESS)) - die_lasterr("DuplicateHandle(%li) failed", - (long) (intptr_t) hnd); - return hresult; -} - -static HANDLE swap_osfhnd(int fd, HANDLE new_handle) -{ - /* - * Create a copy of the original handle associated with fd - * because the original will get closed when we dup2(). - */ - HANDLE handle = (HANDLE)_get_osfhandle(fd); - HANDLE duplicate = duplicate_handle(handle); - - /* Create a temp fd associated with the already open "new_handle". */ - int new_fd = _open_osfhandle((intptr_t)new_handle, O_BINARY); - - assert((fd == 1) || (fd == 2)); - - /* - * Use stock dup2() to re-bind fd to the new handle. Note that - * this will implicitly close(1) and close both fd=1 and the - * originally associated handle. It will open a new fd=1 and - * call DuplicateHandle() on the handle associated with new_fd. - * It is because of this implicit close() that we created the - * copy of the original. - * - * Note that we need to update the cached console handle to the - * duplicated one because the dup2() call will implicitly close - * the original one. - * - * Note that dup2() when given target := {0,1,2} will also - * call SetStdHandle(), so we don't need to worry about that. - */ - if (console == handle) - console = duplicate; - dup2(new_fd, fd); - - /* Close the temp fd. This explicitly closes "new_handle" - * (because it has been associated with it). - */ - close(new_fd); - - if (fd == 2) - setvbuf(stderr, NULL, _IONBF, BUFSIZ); - fd_is_interactive[fd] |= FD_SWAPPED; - - return duplicate; -} - -#ifdef DETECT_MSYS_TTY - -#include <winternl.h> - -#if defined(_MSC_VER) - -typedef struct _OBJECT_NAME_INFORMATION -{ - UNICODE_STRING Name; - WCHAR NameBuffer[0]; -} OBJECT_NAME_INFORMATION, *POBJECT_NAME_INFORMATION; - -#define ObjectNameInformation 1 - -#else -#include <ntstatus.h> -#endif - -static void detect_msys_tty(int fd) -{ - ULONG result; - BYTE buffer[1024]; - POBJECT_NAME_INFORMATION nameinfo = (POBJECT_NAME_INFORMATION) buffer; - PWSTR name; - - /* check if fd is a pipe */ - HANDLE h = (HANDLE) _get_osfhandle(fd); - if (GetFileType(h) != FILE_TYPE_PIPE) - return; - - /* get pipe name */ - if (!NT_SUCCESS(NtQueryObject(h, ObjectNameInformation, - buffer, sizeof(buffer) - 2, &result))) - return; - name = nameinfo->Name.Buffer; - name[nameinfo->Name.Length / sizeof(*name)] = 0; - - /* - * Check if this could be a MSYS2 pty pipe ('msys-XXXX-ptyN-XX') - * or a cygwin pty pipe ('cygwin-XXXX-ptyN-XX') - */ - if ((!wcsstr(name, L"msys-") && !wcsstr(name, L"cygwin-")) || - !wcsstr(name, L"-pty")) - return; - - if (fd == 2) - setvbuf(stderr, NULL, _IONBF, BUFSIZ); - fd_is_interactive[fd] |= FD_MSYS; -} - -#endif - -/* - * Wrapper for isatty(). Most calls in the main git code - * call isatty(1 or 2) to see if the instance is interactive - * and should: be colored, show progress, paginate output. - * We lie and give results for what the descriptor WAS at - * startup (and ignore any pipe redirection we internally - * do). - */ -#undef isatty -int winansi_isatty(int fd) -{ - if (fd >= 0 && fd <= 2) - return fd_is_interactive[fd] != 0; - return isatty(fd); -} - -void winansi_init(void) -{ - int con1, con2; - wchar_t name[32]; - - /* check if either stdout or stderr is a console output screen buffer */ - con1 = is_console(1); - con2 = is_console(2); - - /* Also compute console bit for fd 0 even though we don't need the result here. */ - is_console(0); - - if (!con1 && !con2) { -#ifdef DETECT_MSYS_TTY - /* check if stdin / stdout / stderr are MSYS2 pty pipes */ - detect_msys_tty(0); - detect_msys_tty(1); - detect_msys_tty(2); -#endif - return; - } - - /* create a named pipe to communicate with the console thread */ - if (swprintf(name, ARRAY_SIZE(name) - 1, L"\\\\.\\pipe\\winansi%lu", - GetCurrentProcessId()) < 0) - die("Could not initialize winansi pipe name"); - hwrite = CreateNamedPipeW(name, PIPE_ACCESS_OUTBOUND, - PIPE_TYPE_BYTE | PIPE_WAIT, 1, BUFFER_SIZE, 0, 0, NULL); - if (hwrite == INVALID_HANDLE_VALUE) - die_lasterr("CreateNamedPipe failed"); - - hread = CreateFileW(name, GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL); - if (hread == INVALID_HANDLE_VALUE) - die_lasterr("CreateFile for named pipe failed"); - - /* start console spool thread on the pipe's read end */ - hthread = CreateThread(NULL, 0, console_thread, NULL, 0, NULL); - if (hthread == INVALID_HANDLE_VALUE) - die_lasterr("CreateThread(console_thread) failed"); - - /* schedule cleanup routine */ - if (atexit(winansi_exit)) - die_errno("atexit(winansi_exit) failed"); - - /* redirect stdout / stderr to the pipe */ - if (con1) - hconsole1 = swap_osfhnd(1, duplicate_handle(hwrite)); - if (con2) - hconsole2 = swap_osfhnd(2, duplicate_handle(hwrite)); -} - -/* - * Returns the real console handle if stdout / stderr is a pipe redirecting - * to the console. Allows spawn / exec to pass the console to the next process. - */ -HANDLE winansi_get_osfhandle(int fd) -{ - if (fd == 1 && (fd_is_interactive[1] & FD_SWAPPED)) - return hconsole1; - if (fd == 2 && (fd_is_interactive[2] & FD_SWAPPED)) - return hconsole2; - - return (HANDLE)_get_osfhandle(fd); -} |