diff options
Diffstat (limited to 'third_party/git/Documentation/git-send-email.txt')
| -rw-r--r-- | third_party/git/Documentation/git-send-email.txt | 526 |
1 files changed, 0 insertions, 526 deletions
diff --git a/third_party/git/Documentation/git-send-email.txt b/third_party/git/Documentation/git-send-email.txt deleted file mode 100644 index 0a69810147..0000000000 --- a/third_party/git/Documentation/git-send-email.txt +++ /dev/null @@ -1,526 +0,0 @@ -git-send-email(1) -================= - -NAME ----- -git-send-email - Send a collection of patches as emails - - -SYNOPSIS --------- -[verse] -'git send-email' [<options>] <file|directory|rev-list options>... -'git send-email' --dump-aliases - - -DESCRIPTION ------------ -Takes the patches given on the command line and emails them out. -Patches can be specified as files, directories (which will send all -files in the directory), or directly as a revision list. In the -last case, any format accepted by linkgit:git-format-patch[1] can -be passed to git send-email. - -The header of the email is configurable via command-line options. If not -specified on the command line, the user will be prompted with a ReadLine -enabled interface to provide the necessary information. - -There are two formats accepted for patch files: - -1. mbox format files -+ -This is what linkgit:git-format-patch[1] generates. Most headers and MIME -formatting are ignored. - -2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' - script -+ -This format expects the first line of the file to contain the "Cc:" value -and the "Subject:" of the message as the second line. - - -OPTIONS -------- - -Composing -~~~~~~~~~ - ---annotate:: - Review and edit each patch you're about to send. Default is the value - of `sendemail.annotate`. See the CONFIGURATION section for - `sendemail.multiEdit`. - ---bcc=<address>,...:: - Specify a "Bcc:" value for each email. Default is the value of - `sendemail.bcc`. -+ -This option may be specified multiple times. - ---cc=<address>,...:: - Specify a starting "Cc:" value for each email. - Default is the value of `sendemail.cc`. -+ -This option may be specified multiple times. - ---compose:: - Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) - to edit an introductory message for the patch series. -+ -When `--compose` is used, git send-email will use the From, Subject, and -In-Reply-To headers specified in the message. If the body of the message -(what you type after the headers and a blank line) only contains blank -(or Git: prefixed) lines, the summary won't be sent, but From, Subject, -and In-Reply-To headers will be used unless they are removed. -+ -Missing From or In-Reply-To headers will be prompted for. -+ -See the CONFIGURATION section for `sendemail.multiEdit`. - ---from=<address>:: - Specify the sender of the emails. If not specified on the command line, - the value of the `sendemail.from` configuration option is used. If - neither the command-line option nor `sendemail.from` are set, then the - user will be prompted for the value. The default for the prompt will be - the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not - set, as returned by "git var -l". - ---reply-to=<address>:: - Specify the address where replies from recipients should go to. - Use this if replies to messages should go to another address than what - is specified with the --from parameter. - ---in-reply-to=<identifier>:: - Make the first mail (or all the mails with `--no-thread`) appear as a - reply to the given Message-Id, which avoids breaking threads to - provide a new patch series. - The second and subsequent emails will be sent as replies according to - the `--[no-]chain-reply-to` setting. -+ -So for example when `--thread` and `--no-chain-reply-to` are specified, the -second and subsequent patches will be replies to the first one like in the -illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`: -+ - [PATCH 0/2] Here is what I did... - [PATCH 1/2] Clean up and tests - [PATCH 2/2] Implementation - [PATCH v2 0/3] Here is a reroll - [PATCH v2 1/3] Clean up - [PATCH v2 2/3] New tests - [PATCH v2 3/3] Implementation -+ -Only necessary if --compose is also set. If --compose -is not set, this will be prompted for. - ---subject=<string>:: - Specify the initial subject of the email thread. - Only necessary if --compose is also set. If --compose - is not set, this will be prompted for. - ---to=<address>,...:: - Specify the primary recipient of the emails generated. Generally, this - will be the upstream maintainer of the project involved. Default is the - value of the `sendemail.to` configuration value; if that is unspecified, - and --to-cmd is not specified, this will be prompted for. -+ -This option may be specified multiple times. - ---8bit-encoding=<encoding>:: - When encountering a non-ASCII message or subject that does not - declare its encoding, add headers/quoting to indicate it is - encoded in <encoding>. Default is the value of the - 'sendemail.assume8bitEncoding'; if that is unspecified, this - will be prompted for if any non-ASCII files are encountered. -+ -Note that no attempts whatsoever are made to validate the encoding. - ---compose-encoding=<encoding>:: - Specify encoding of compose message. Default is the value of the - 'sendemail.composeencoding'; if that is unspecified, UTF-8 is assumed. - ---transfer-encoding=(7bit|8bit|quoted-printable|base64|auto):: - Specify the transfer encoding to be used to send the message over SMTP. - 7bit will fail upon encountering a non-ASCII message. quoted-printable - can be useful when the repository contains files that contain carriage - returns, but makes the raw patch email file (as saved from a MUA) much - harder to inspect manually. base64 is even more fool proof, but also - even more opaque. auto will use 8bit when possible, and quoted-printable - otherwise. -+ -Default is the value of the `sendemail.transferEncoding` configuration -value; if that is unspecified, default to `auto`. - ---xmailer:: ---no-xmailer:: - Add (or prevent adding) the "X-Mailer:" header. By default, - the header is added, but it can be turned off by setting the - `sendemail.xmailer` configuration variable to `false`. - -Sending -~~~~~~~ - ---envelope-sender=<address>:: - Specify the envelope sender used to send the emails. - This is useful if your default address is not the address that is - subscribed to a list. In order to use the 'From' address, set the - value to "auto". If you use the sendmail binary, you must have - suitable privileges for the -f parameter. Default is the value of the - `sendemail.envelopeSender` configuration variable; if that is - unspecified, choosing the envelope sender is left to your MTA. - ---smtp-encryption=<encryption>:: - Specify the encryption to use, either 'ssl' or 'tls'. Any other - value reverts to plain SMTP. Default is the value of - `sendemail.smtpEncryption`. - ---smtp-domain=<FQDN>:: - Specifies the Fully Qualified Domain Name (FQDN) used in the - HELO/EHLO command to the SMTP server. Some servers require the - FQDN to match your IP address. If not set, git send-email attempts - to determine your FQDN automatically. Default is the value of - `sendemail.smtpDomain`. - ---smtp-auth=<mechanisms>:: - Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting - forces using only the listed mechanisms. Example: -+ ------- -$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ... ------- -+ -If at least one of the specified mechanisms matches the ones advertised by the -SMTP server and if it is supported by the utilized SASL library, the mechanism -is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth` -is specified, all mechanisms supported by the SASL library can be used. The -special value 'none' maybe specified to completely disable authentication -independently of `--smtp-user` - ---smtp-pass[=<password>]:: - Password for SMTP-AUTH. The argument is optional: If no - argument is specified, then the empty string is used as - the password. Default is the value of `sendemail.smtpPass`, - however `--smtp-pass` always overrides this value. -+ -Furthermore, passwords need not be specified in configuration files -or on the command line. If a username has been specified (with -`--smtp-user` or a `sendemail.smtpUser`), but no password has been -specified (with `--smtp-pass` or `sendemail.smtpPass`), then -a password is obtained using 'git-credential'. - ---no-smtp-auth:: - Disable SMTP authentication. Short hand for `--smtp-auth=none` - ---smtp-server=<host>:: - If set, specifies the outgoing SMTP server to use (e.g. - `smtp.example.com` or a raw IP address). Alternatively it can - specify a full pathname of a sendmail-like program instead; - the program must support the `-i` option. Default value can - be specified by the `sendemail.smtpServer` configuration - option; the built-in default is to search for `sendmail` in - `/usr/sbin`, `/usr/lib` and $PATH if such program is - available, falling back to `localhost` otherwise. - ---smtp-server-port=<port>:: - Specifies a port different from the default port (SMTP - servers typically listen to smtp port 25, but may also listen to - submission port 587, or the common SSL smtp port 465); - symbolic port names (e.g. "submission" instead of 587) - are also accepted. The port can also be set with the - `sendemail.smtpServerPort` configuration variable. - ---smtp-server-option=<option>:: - If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the `sendemail.smtpServerOption` - configuration option. -+ -The --smtp-server-option option must be repeated for each option you want -to pass to the server. Likewise, different lines in the configuration files -must be used for each option. - ---smtp-ssl:: - Legacy alias for '--smtp-encryption ssl'. - ---smtp-ssl-cert-path:: - Path to a store of trusted CA certificates for SMTP SSL/TLS - certificate validation (either a directory that has been processed - by 'c_rehash', or a single file containing one or more PEM format - certificates concatenated together: see verify(1) -CAfile and - -CApath for more information on these). Set it to an empty string - to disable certificate verification. Defaults to the value of the - `sendemail.smtpsslcertpath` configuration variable, if set, or the - backing SSL library's compiled-in default otherwise (which should - be the best choice on most platforms). - ---smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`; - if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`), - then authentication is not attempted. - ---smtp-debug=0|1:: - Enable (1) or disable (0) debug output. If enabled, SMTP - commands and replies will be printed. Useful to debug TLS - connection and authentication problems. - ---batch-size=<num>:: - Some email servers (e.g. smtp.163.com) limit the number emails to be - sent per session (connection) and this will lead to a failure when - sending many messages. With this option, send-email will disconnect after - sending $<num> messages and wait for a few seconds (see --relogin-delay) - and reconnect, to work around such a limit. You may want to - use some form of credential helper to avoid having to retype - your password every time this happens. Defaults to the - `sendemail.smtpBatchSize` configuration variable. - ---relogin-delay=<int>:: - Waiting $<int> seconds before reconnecting to SMTP server. Used together - with --batch-size option. Defaults to the `sendemail.smtpReloginDelay` - configuration variable. - -Automating -~~~~~~~~~~ - ---no-[to|cc|bcc]:: - Clears any list of "To:", "Cc:", "Bcc:" addresses previously - set via config. - ---no-identity:: - Clears the previously read value of `sendemail.identity` set - via config, if any. - ---to-cmd=<command>:: - Specify a command to execute once per patch file which - should generate patch file specific "To:" entries. - Output of this command must be single email address per line. - Default is the value of 'sendemail.tocmd' configuration value. - ---cc-cmd=<command>:: - Specify a command to execute once per patch file which - should generate patch file specific "Cc:" entries. - Output of this command must be single email address per line. - Default is the value of `sendemail.ccCmd` configuration value. - ---[no-]chain-reply-to:: - If this is set, each email will be sent as a reply to the previous - email sent. If disabled with "--no-chain-reply-to", all emails after - the first will be sent as replies to the first email sent. When using - this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the `sendemail.chainReplyTo` - configuration variable can be used to enable it. - ---identity=<identity>:: - A configuration identity. When given, causes values in the - 'sendemail.<identity>' subsection to take precedence over - values in the 'sendemail' section. The default identity is - the value of `sendemail.identity`. - ---[no-]signed-off-by-cc:: - If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of `sendemail.signedoffbycc` configuration - value; if that is unspecified, default to --signed-off-by-cc. - ---[no-]cc-cover:: - If this is set, emails found in Cc: headers in the first patch of - the series (typically the cover letter) are added to the cc list - for each email set. Default is the value of 'sendemail.cccover' - configuration value; if that is unspecified, default to --no-cc-cover. - ---[no-]to-cover:: - If this is set, emails found in To: headers in the first patch of - the series (typically the cover letter) are added to the to list - for each email set. Default is the value of 'sendemail.tocover' - configuration value; if that is unspecified, default to --no-to-cover. - ---suppress-cc=<category>:: - Specify an additional category of recipients to suppress the - auto-cc of: -+ --- -- 'author' will avoid including the patch author. -- 'self' will avoid including the sender. -- 'cc' will avoid including anyone mentioned in Cc lines in the patch header - except for self (use 'self' for that). -- 'bodycc' will avoid including anyone mentioned in Cc lines in the - patch body (commit message) except for self (use 'self' for that). -- 'sob' will avoid including anyone mentioned in Signed-off-by lines except - for self (use 'self' for that). -- 'misc-by' will avoid including anyone mentioned in Acked-by, - Reviewed-by, Tested-by and other "-by" lines in the patch body, - except Signed-off-by (use 'sob' for that). -- 'cccmd' will avoid running the --cc-cmd. -- 'body' is equivalent to 'sob' + 'bodycc' + 'misc-by'. -- 'all' will suppress all auto cc values. --- -+ -Default is the value of `sendemail.suppresscc` configuration value; if -that is unspecified, default to 'self' if --suppress-from is -specified, as well as 'body' if --no-signed-off-cc is specified. - ---[no-]suppress-from:: - If this is set, do not add the From: address to the cc: list. - Default is the value of `sendemail.suppressFrom` configuration - value; if that is unspecified, default to --no-suppress-from. - ---[no-]thread:: - If this is set, the In-Reply-To and References headers will be - added to each email sent. Whether each mail refers to the - previous email (`deep` threading per 'git format-patch' - wording) or to the first email (`shallow` threading) is - governed by "--[no-]chain-reply-to". -+ -If disabled with "--no-thread", those headers will not be added -(unless specified with --in-reply-to). Default is the value of the -`sendemail.thread` configuration value; if that is unspecified, -default to --thread. -+ -It is up to the user to ensure that no In-Reply-To header already -exists when 'git send-email' is asked to add it (especially note that -'git format-patch' can be configured to do the threading itself). -Failure to do so may not produce the expected result in the -recipient's MUA. - - -Administering -~~~~~~~~~~~~~ - ---confirm=<mode>:: - Confirm just before sending: -+ --- -- 'always' will always confirm before sending -- 'never' will never confirm before sending -- 'cc' will confirm before sending when send-email has automatically - added addresses from the patch to the Cc list -- 'compose' will confirm before sending the first message when using --compose. -- 'auto' is equivalent to 'cc' + 'compose' --- -+ -Default is the value of `sendemail.confirm` configuration value; if that -is unspecified, default to 'auto' unless any of the suppress options -have been specified, in which case default to 'compose'. - ---dry-run:: - Do everything except actually send the emails. - ---[no-]format-patch:: - When an argument may be understood either as a reference or as a file name, - choose to understand it as a format-patch argument (`--format-patch`) - or as a file name (`--no-format-patch`). By default, when such a conflict - occurs, git send-email will fail. - ---quiet:: - Make git-send-email less verbose. One line per email should be - all that is output. - ---[no-]validate:: - Perform sanity checks on patches. - Currently, validation means the following: -+ --- - * Invoke the sendemail-validate hook if present (see linkgit:githooks[5]). - * Warn of patches that contain lines longer than - 998 characters unless a suitable transfer encoding - ('auto', 'base64', or 'quoted-printable') is used; - this is due to SMTP limits as described by - http://www.ietf.org/rfc/rfc5322.txt. --- -+ -Default is the value of `sendemail.validate`; if this is not set, -default to `--validate`. - ---force:: - Send emails even if safety checks would prevent it. - - -Information -~~~~~~~~~~~ - ---dump-aliases:: - Instead of the normal operation, dump the shorthand alias names from - the configured alias file(s), one per line in alphabetical order. Note, - this only includes the alias name and not its expanded email addresses. - See 'sendemail.aliasesfile' for more information about aliases. - - -CONFIGURATION -------------- - -sendemail.aliasesFile:: - To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply `sendemail.aliasFileType`. - -sendemail.aliasFileType:: - Format of the file(s) specified in sendemail.aliasesFile. Must be - one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus', or 'sendmail'. -+ -What an alias file in each format looks like can be found in -the documentation of the email program of the same name. The -differences and limitations from the standard formats are -described below: -+ --- -sendmail;; -* Quoted aliases and quoted addresses are not supported: lines that - contain a `"` symbol are ignored. -* Redirection to a file (`/path/name`) or pipe (`|command`) is not - supported. -* File inclusion (`:include: /path/name`) is not supported. -* Warnings are printed on the standard error output for any - explicitly unsupported constructs, and any other lines that are not - recognized by the parser. --- - -sendemail.multiEdit:: - If true (default), a single editor instance will be spawned to edit - files you have to edit (patches when `--annotate` is used, and the - summary when `--compose` is used). If false, files will be edited one - after the other, spawning a new editor each time. - -sendemail.confirm:: - Sets the default for whether to confirm before sending. Must be - one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm` - in the previous section for the meaning of these values. - -EXAMPLES --------- -Use gmail as the smtp server -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To use 'git send-email' to send your patches through the GMail SMTP server, -edit ~/.gitconfig to specify your account settings: - ----- -[sendemail] - smtpEncryption = tls - smtpServer = smtp.gmail.com - smtpUser = yourname@gmail.com - smtpServerPort = 587 ----- - -If you have multifactor authentication setup on your gmail account, you will -need to generate an app-specific password for use with 'git send-email'. Visit -https://security.google.com/settings/security/apppasswords to create it. - -Once your commits are ready to be sent to the mailing list, run the -following commands: - - $ git format-patch --cover-letter -M origin/master -o outgoing/ - $ edit outgoing/0000-* - $ git send-email outgoing/* - -The first time you run it, you will be prompted for your credentials. Enter the -app-specific or your regular password as appropriate. If you have credential -helper configured (see linkgit:git-credential[1]), the password will be saved in -the credential store so you won't have to type it the next time. - -Note: the following core Perl modules that may be installed with your -distribution of Perl are required: -MIME::Base64, MIME::QuotedPrint, Net::Domain and Net::SMTP. -These additional Perl modules are also required: -Authen::SASL and Mail::Address. - - -SEE ALSO --------- -linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5) - -GIT ---- -Part of the linkgit:git[1] suite |