diff options
Diffstat (limited to 'third_party/git/Documentation/config.txt')
| -rw-r--r-- | third_party/git/Documentation/config.txt | 460 |
1 files changed, 0 insertions, 460 deletions
diff --git a/third_party/git/Documentation/config.txt b/third_party/git/Documentation/config.txt deleted file mode 100644 index e3f5bc3396..0000000000 --- a/third_party/git/Documentation/config.txt +++ /dev/null @@ -1,460 +0,0 @@ -CONFIGURATION FILE ------------------- - -The Git configuration file contains a number of variables that affect -the Git commands' behavior. The files `.git/config` and optionally -`config.worktree` (see `extensions.worktreeConfig` below) in each -repository are used to store the configuration for that repository, and -`$HOME/.gitconfig` is used to store a per-user configuration as -fallback values for the `.git/config` file. The file `/etc/gitconfig` -can be used to store a system-wide default configuration. - -The configuration variables are used by both the Git plumbing -and the porcelains. The variables are divided into sections, wherein -the fully qualified variable name of the variable itself is the last -dot-separated segment and the section name is everything before the last -dot. The variable names are case-insensitive, allow only alphanumeric -characters and `-`, and must start with an alphabetic character. Some -variables may appear multiple times; we say then that the variable is -multivalued. - -Syntax -~~~~~~ - -The syntax is fairly flexible and permissive; whitespaces are mostly -ignored. The '#' and ';' characters begin comments to the end of line, -blank lines are ignored. - -The file consists of sections and variables. A section begins with -the name of the section in square brackets and continues until the next -section begins. Section names are case-insensitive. Only alphanumeric -characters, `-` and `.` are allowed in section names. Each variable -must belong to some section, which means that there must be a section -header before the first setting of a variable. - -Sections can be further divided into subsections. To begin a subsection -put its name in double quotes, separated by space from the section name, -in the section header, like in the example below: - --------- - [section "subsection"] - --------- - -Subsection names are case sensitive and can contain any characters except -newline and the null byte. Doublequote `"` and backslash can be included -by escaping them as `\"` and `\\`, respectively. Backslashes preceding -other characters are dropped when reading; for example, `\t` is read as -`t` and `\0` is read as `0` Section headers cannot span multiple lines. -Variables may belong directly to a section or to a given subsection. You -can have `[section]` if you have `[section "subsection"]`, but you don't -need to. - -There is also a deprecated `[section.subsection]` syntax. With this -syntax, the subsection name is converted to lower-case and is also -compared case sensitively. These subsection names follow the same -restrictions as section names. - -All the other lines (and the remainder of the line after the section -header) are recognized as setting variables, in the form -'name = value' (or just 'name', which is a short-hand to say that -the variable is the boolean "true"). -The variable names are case-insensitive, allow only alphanumeric characters -and `-`, and must start with an alphabetic character. - -A line that defines a value can be continued to the next line by -ending it with a `\`; the backquote and the end-of-line are -stripped. Leading whitespaces after 'name =', the remainder of the -line after the first comment character '#' or ';', and trailing -whitespaces of the line are discarded unless they are enclosed in -double quotes. Internal whitespaces within the value are retained -verbatim. - -Inside double quotes, double quote `"` and backslash `\` characters -must be escaped: use `\"` for `"` and `\\` for `\`. - -The following escape sequences (beside `\"` and `\\`) are recognized: -`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB) -and `\b` for backspace (BS). Other char escape sequences (including octal -escape sequences) are invalid. - - -Includes -~~~~~~~~ - -The `include` and `includeIf` sections allow you to include config -directives from another source. These sections behave identically to -each other with the exception that `includeIf` sections may be ignored -if their condition does not evaluate to true; see "Conditional includes" -below. - -You can include a config file from another by setting the special -`include.path` (or `includeIf.*.path`) variable to the name of the file -to be included. The variable takes a pathname as its value, and is -subject to tilde expansion. These variables can be given multiple times. - -The contents of the included file are inserted immediately, as if they -had been found at the location of the include directive. If the value of the -variable is a relative path, the path is considered to -be relative to the configuration file in which the include directive -was found. See below for examples. - -Conditional includes -~~~~~~~~~~~~~~~~~~~~ - -You can include a config file from another conditionally by setting a -`includeIf.<condition>.path` variable to the name of the file to be -included. - -The condition starts with a keyword followed by a colon and some data -whose format and meaning depends on the keyword. Supported keywords -are: - -`gitdir`:: - - The data that follows the keyword `gitdir:` is used as a glob - pattern. If the location of the .git directory matches the - pattern, the include condition is met. -+ -The .git location may be auto-discovered, or come from `$GIT_DIR` -environment variable. If the repository is auto discovered via a .git -file (e.g. from submodules, or a linked worktree), the .git location -would be the final location where the .git directory is, not where the -.git file is. -+ -The pattern can contain standard globbing wildcards and two additional -ones, `**/` and `/**`, that can match multiple path components. Please -refer to linkgit:gitignore[5] for details. For convenience: - - * If the pattern starts with `~/`, `~` will be substituted with the - content of the environment variable `HOME`. - - * If the pattern starts with `./`, it is replaced with the directory - containing the current config file. - - * If the pattern does not start with either `~/`, `./` or `/`, `**/` - will be automatically prepended. For example, the pattern `foo/bar` - becomes `**/foo/bar` and would match `/any/path/to/foo/bar`. - - * If the pattern ends with `/`, `**` will be automatically added. For - example, the pattern `foo/` becomes `foo/**`. In other words, it - matches "foo" and everything inside, recursively. - -`gitdir/i`:: - This is the same as `gitdir` except that matching is done - case-insensitively (e.g. on case-insensitive file sytems) - -`onbranch`:: - The data that follows the keyword `onbranch:` is taken to be a - pattern with standard globbing wildcards and two additional - ones, `**/` and `/**`, that can match multiple path components. - If we are in a worktree where the name of the branch that is - currently checked out matches the pattern, the include condition - is met. -+ -If the pattern ends with `/`, `**` will be automatically added. For -example, the pattern `foo/` becomes `foo/**`. In other words, it matches -all branches that begin with `foo/`. This is useful if your branches are -organized hierarchically and you would like to apply a configuration to -all the branches in that hierarchy. - -A few more notes on matching via `gitdir` and `gitdir/i`: - - * Symlinks in `$GIT_DIR` are not resolved before matching. - - * Both the symlink & realpath versions of paths will be matched - outside of `$GIT_DIR`. E.g. if ~/git is a symlink to - /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git` - will match. -+ -This was not the case in the initial release of this feature in -v2.13.0, which only matched the realpath version. Configuration that -wants to be compatible with the initial release of this feature needs -to either specify only the realpath version, or both versions. - - * Note that "../" is not special and will match literally, which is - unlikely what you want. - -Example -~~~~~~~ - - # Core variables - [core] - ; Don't trust file modes - filemode = false - - # Our diff algorithm - [diff] - external = /usr/local/bin/diff-wrapper - renames = true - - [branch "devel"] - remote = origin - merge = refs/heads/devel - - # Proxy settings - [core] - gitProxy="ssh" for "kernel.org" - gitProxy=default-proxy ; for the rest - - [include] - path = /path/to/foo.inc ; include by absolute path - path = foo.inc ; find "foo.inc" relative to the current file - path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory - - ; include if $GIT_DIR is /path/to/foo/.git - [includeIf "gitdir:/path/to/foo/.git"] - path = /path/to/foo.inc - - ; include for all repositories inside /path/to/group - [includeIf "gitdir:/path/to/group/"] - path = /path/to/foo.inc - - ; include for all repositories inside $HOME/to/group - [includeIf "gitdir:~/to/group/"] - path = /path/to/foo.inc - - ; relative paths are always relative to the including - ; file (if the condition is true); their location is not - ; affected by the condition - [includeIf "gitdir:/path/to/group/"] - path = foo.inc - - ; include only if we are in a worktree where foo-branch is - ; currently checked out - [includeIf "onbranch:foo-branch"] - path = foo.inc - -Values -~~~~~~ - -Values of many variables are treated as a simple string, but there -are variables that take values of specific types and there are rules -as to how to spell them. - -boolean:: - - When a variable is said to take a boolean value, many - synonyms are accepted for 'true' and 'false'; these are all - case-insensitive. - - true;; Boolean true literals are `yes`, `on`, `true`, - and `1`. Also, a variable defined without `= <value>` - is taken as true. - - false;; Boolean false literals are `no`, `off`, `false`, - `0` and the empty string. -+ -When converting a value to its canonical form using the `--type=bool` type -specifier, 'git config' will ensure that the output is "true" or -"false" (spelled in lowercase). - -integer:: - The value for many variables that specify various sizes can - be suffixed with `k`, `M`,... to mean "scale the number by - 1024", "by 1024x1024", etc. - -color:: - The value for a variable that takes a color is a list of - colors (at most two, one for foreground and one for background) - and attributes (as many as you want), separated by spaces. -+ -The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`, -`blue`, `magenta`, `cyan` and `white`. The first color given is the -foreground; the second is the background. -+ -Colors may also be given as numbers between 0 and 255; these use ANSI -256-color mode (but note that not all terminals may support this). If -your terminal supports it, you may also specify 24-bit RGB values as -hex, like `#ff0ab3`. -+ -The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`, -`italic`, and `strike` (for crossed-out or "strikethrough" letters). -The position of any attributes with respect to the colors -(before, after, or in between), doesn't matter. Specific attributes may -be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`, -`no-ul`, etc). -+ -An empty color string produces no color effect at all. This can be used -to avoid coloring specific elements without disabling color entirely. -+ -For git's pre-defined color slots, the attributes are meant to be reset -at the beginning of each item in the colored output. So setting -`color.decorate.branch` to `black` will paint that branch name in a -plain `black`, even if the previous thing on the same output line (e.g. -opening parenthesis before the list of branch names in `log --decorate` -output) is set to be painted with `bold` or some other attribute. -However, custom log formats may do more complicated and layered -coloring, and the negated forms may be useful there. - -pathname:: - A variable that takes a pathname value can be given a - string that begins with "`~/`" or "`~user/`", and the usual - tilde expansion happens to such a string: `~/` - is expanded to the value of `$HOME`, and `~user/` to the - specified user's home directory. - - -Variables -~~~~~~~~~ - -Note that this list is non-comprehensive and not necessarily complete. -For command-specific variables, you will find a more detailed description -in the appropriate manual page. - -Other git-related tools may and do use their own variables. When -inventing new variables for use in your own tool, make sure their -names do not conflict with those that are used by Git itself and -other popular tools, and describe them in your documentation. - -include::config/advice.txt[] - -include::config/core.txt[] - -include::config/add.txt[] - -include::config/alias.txt[] - -include::config/am.txt[] - -include::config/apply.txt[] - -include::config/blame.txt[] - -include::config/branch.txt[] - -include::config/browser.txt[] - -include::config/checkout.txt[] - -include::config/clean.txt[] - -include::config/color.txt[] - -include::config/column.txt[] - -include::config/commit.txt[] - -include::config/credential.txt[] - -include::config/completion.txt[] - -include::config/diff.txt[] - -include::config/difftool.txt[] - -include::config/fastimport.txt[] - -include::config/fetch.txt[] - -include::config/format.txt[] - -include::config/filter.txt[] - -include::config/fsck.txt[] - -include::config/gc.txt[] - -include::config/gitcvs.txt[] - -include::config/gitweb.txt[] - -include::config/grep.txt[] - -include::config/gpg.txt[] - -include::config/gui.txt[] - -include::config/guitool.txt[] - -include::config/help.txt[] - -include::config/http.txt[] - -include::config/i18n.txt[] - -include::config/imap.txt[] - -include::config/index.txt[] - -include::config/init.txt[] - -include::config/instaweb.txt[] - -include::config/interactive.txt[] - -include::config/log.txt[] - -include::config/mailinfo.txt[] - -include::config/mailmap.txt[] - -include::config/man.txt[] - -include::config/merge.txt[] - -include::config/mergetool.txt[] - -include::config/notes.txt[] - -include::config/pack.txt[] - -include::config/pager.txt[] - -include::config/pretty.txt[] - -include::config/protocol.txt[] - -include::config/pull.txt[] - -include::config/push.txt[] - -include::config/rebase.txt[] - -include::config/receive.txt[] - -include::config/remote.txt[] - -include::config/remotes.txt[] - -include::config/repack.txt[] - -include::config/rerere.txt[] - -include::config/reset.txt[] - -include::config/sendemail.txt[] - -include::config/sequencer.txt[] - -include::config/showbranch.txt[] - -include::config/splitindex.txt[] - -include::config/ssh.txt[] - -include::config/status.txt[] - -include::config/stash.txt[] - -include::config/submodule.txt[] - -include::config/tag.txt[] - -include::config/trace2.txt[] - -include::config/transfer.txt[] - -include::config/uploadarchive.txt[] - -include::config/uploadpack.txt[] - -include::config/url.txt[] - -include::config/user.txt[] - -include::config/versionsort.txt[] - -include::config/web.txt[] - -include::config/worktree.txt[] |