diff options
Diffstat (limited to 'configs/.vimrc')
| -rw-r--r-- | configs/.vimrc | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/configs/.vimrc b/configs/.vimrc new file mode 100644 index 000000000000..b5bb7241c009 --- /dev/null +++ b/configs/.vimrc @@ -0,0 +1,423 @@ +" -- BEGIN: Vundle config -- +set nocompatible " be iMproved, required +filetype off " required + +" set the runtime path to include Vundle and initialize +set rtp+=~/.vim/bundle/Vundle.vim +call vundle#begin() +" alternatively, pass a path where Vundle should install plugins +"call vundle#begin('~/some/path/here') + +" let Vundle manage Vundle, required +Plugin 'VundleVim/Vundle.vim' + +" The following are examples of different formats supported. +" Keep Plugin commands between vundle#begin/end. + +" Displays git information in airline. +Plugin 'tpope/vim-fugitive' + +Plugin 'Raimondi/delimitMate' + +" Autocompletion +Plugin 'Valloric/YouCompleteMe' + +" Displays git-tracked C*UD ops within gutter. +Plugin 'airblade/vim-gitgutter' +Plugin 'kien/ctrlp.vim' +Plugin 'mileszs/ack.vim' +Plugin 'pangloss/vim-javascript' +Plugin 'scrooloose/nerdtree' +Plugin 'scrooloose/syntastic' + +" Syntax Highlighting Support +Plugin 'lambdatoast/elm.vim' + +" Themes +Plugin 'sickill/vim-monokai' +Plugin 'altercation/vim-colors-solarized' + +" Executes shell commands and pipes output into new Vim buffer. +Plugin 'sjl/clam.vim' + +" Multiple cursors for simultaneous edits. +" NOTE: use <C-n> to run miltiple cursors not <C-d> +Plugin 'terryma/vim-multiple-cursors' + +" Visualize buffers +Plugin 'vim-airline/vim-airline' +Plugin 'vim-airline/vim-airline-themes' + + +call vundle#end() " required +filetype plugin indent on " required +" Put your non-Plugin stuff after this line +" -- END: Vundle config -- + + +" Airline Settings +" Enables the list of buffers. +let g:airline#extensions#tabline#enabled = 1 + +" Shows the filename only. +let g:airline#extensions#tabline#fnamemod = ':t' + +" Allow glyphs in airline +let g:airline_powerline_fonts = 1 + + +" It's the twenty-first century...no swaps. +set noswapfile + + +" Allow visual tab completion in command mode +set wildmenu + + +" Show Vim commands as they're being input. +set showcmd + + +" Code folding +set foldmethod=indent +set foldnestmax=10 +set nofoldenable +set foldlevel=4 + + +" Use relative line numbers +set relativenumber + + +" Opens all folds within the buffer +nnoremap ZZ zR + +" Closes all folds within the buffer +nnoremap zz zM + +" Opens all folds beneath the cursor +" NOTE: j is the character to go down +nnoremap zJ zO + +" Opens single fold beneath the cursor +" NOTE: j is the character to go down +nnoremap zj zo + +" Opens single fold beneath the cursor +" NOTE: k is the character to go down +nnoremap zK zC + +" Opens single fold beneath the cursor +" NOTE: k is the character to go down +nnoremap zk zc + + +" Changes <leader> to <space> character. +let mapleader = " " + + +" Supports mouse interaction. +set mouse=a + + +" Highlights matches during a search. +set hlsearch + +nnoremap <leader>/ :set hlsearch!<CR> + + +" Use custom-made snippets. +nnoremap ,jsfn :-1read $HOME/.vim/function_skeleton.js<CR>o + + +" backspace settings +set backspace=2 +set backspace=indent,eol,start + + +" Javascript specific variables +let g:javascript_plugin_jsdoc = 1 + +" GlobalListchars +set list +set listchars=eol:¶,trail:~,nbsp:␣ + + +" Keeps everything concealed at all times. Even when cursor is on the word. +set conceallevel=1 +set concealcursor=nvic + +" JavaScript thanks to pangloss/vim-javascript +" let g:javascript_conceal_function = "ƒ" +" match ErrorMsg /ƒ/ + + +" Ultisnips +" Track the engine. +Plugin 'SirVer/ultisnips' + +" Snippets are separated from the engine. Add this if you want them: +Plugin 'honza/vim-snippets' + +" Trigger configuration. Do not use <tab> if you use https://github.com/Valloric/YouCompleteMe. +let g:UltiSnipsExpandTrigger="<c-x>" +" let g:UltiSnipsJumpForwardTrigger="<c-j>" +" let g:UltiSnipsJumpBackwardTrigger="<c-k>" + + +" map jk to <Esc> +inoremap jk <Esc> + + +" Conventional Emacs line-editor defaults +inoremap <C-a> <Esc>I +inoremap <C-e> <Esc>A + + +" Manage Vertical and Horizontal splits +nnoremap vs <Esc>:vs<CR> +nnoremap vv <Esc>:vs<CR> +nnoremap sp <Esc>:sp<CR> +nnoremap ss <Esc>:sp<CR> + + +" Move around splits with <leader> +nnoremap <leader>h <C-w>h +nnoremap <leader>j <C-w>j +nnoremap <leader>k <C-w>k +nnoremap <leader>l <C-w>l +nnoremap <leader>q <C-w>q + + +" Fuzzy-find open buffer via CtrlP +nnoremap <leader>bg :CtrlPBuffer<CR> + + +" Buffer creation and management +" Buffer movement +nnoremap <C-l> :1bnext<CR> +nnoremap <C-h> :1bprevious<CR> + +" Buffer creation +nnoremap <C-t> :enew<CR> + +" Buffer deletion +nnoremap <leader>bq :bp <BAR> bd #<CR> + + +" make Y do what is intuitive given: +" D: deletes until EOL +" C: changes until EOL +" Y: (should) yank until EOL +nnoremap Y y$ + + +" flip number keys to their shift+ counterparts +nnoremap t1 t! +nnoremap t2 t@ +nnoremap t3 t# +nnoremap t4 t$ +nnoremap t5 t% +nnoremap t6 t^ +nnoremap t7 t& +nnoremap t8 t* +nnoremap t9 t( +nnoremap t0 t) + +nnoremap T1 T! +nnoremap T2 T@ +nnoremap T3 T# +nnoremap T4 T$ +nnoremap T5 T% +nnoremap T6 T^ +nnoremap T7 T& +nnoremap T8 T* +nnoremap T9 T( +nnoremap T0 T) + +nnoremap f1 f! +nnoremap f2 f@ +nnoremap f3 f# +nnoremap f4 f$ +nnoremap f5 f% +nnoremap f6 f^ +nnoremap f7 f& +nnoremap f8 f* +nnoremap f9 f( +nnoremap f0 f) + +nnoremap F1 F! +nnoremap F2 F@ +nnoremap F3 F# +nnoremap F4 F$ +nnoremap F5 F% +nnoremap F6 F^ +nnoremap F7 F& +nnoremap F8 F* +nnoremap F9 F( +nnoremap F0 F) + + +" Karate edits +nnoremap ca9 ca( +nnoremap da9 da( +nnoremap va9 va( + +nnoremap ca0 ca) +nnoremap da0 da) +nnoremap va0 va) + +nnoremap ci9 ci( +nnoremap di9 di( +nnoremap vi9 vi( + +nnoremap ci0 ci) +nnoremap di0 di) +nnoremap vi0 vi) + + +" scrolling and maintaing mouse position +nnoremap <C-j> j<C-e> +nnoremap <C-k> k<C-y> + + +" reload file after git changes +nnoremap <C-r> :e<CR> + + +" -- Syntastic Settings -- +set statusline+=%#warningmsg# +set statusline+=%{SyntasticStatuslineFlag()} +set statusline+=%* + +let g:syntastic_always_populate_loc_list = 1 +let g:syntastic_auto_loc_list = 1 +let g:syntastic_check_on_open = 1 +let g:syntastic_check_on_wq = 1 +let g:syntastic_javascript_checkers = ['gjslint'] + + +" Basic settings +set number +set tabstop=2 +set expandtab +set shiftwidth=2 + +syntax enable +set background=dark +colorscheme solarized + +set t_Co=255 + + +" Support italics +highlight Comment cterm=italic + + +" Define highlighting groups +" NOTE: The ANSII aliases for colors will change when iTerm2 settings are +" changed. +highlight InterestingWord1 ctermbg=Magenta ctermfg=Black +highlight InterestingWord2 ctermbg=Blue ctermfg=Black + +" h1 highlighting +nnoremap <silent> <leader>1 :execute '2match InterestingWord1 /\<<c-r><c-w>\>/'<CR> +nnoremap <silent> <leader>x1 :execute '2match none'<CR> + +" h2 highlighting +nnoremap <silent> <leader>2 :execute '3match InterestingWord2 /\<<c-r><c-w>\>/'<CR> +nnoremap <silent> <leader>x2 :execute '3match none'<CR> + +"clear all highlighted groups +nnoremap <silent> <leader>xx :execute '2match none'<CR> :execute '3match none'<CR> hh + + +" pasteboard copy & paste +nnoremap <C-c> V"+y +vnoremap <C-c> "+y + +inoremap <C-v> <Esc>"+pa +nnoremap <C-v> o<Esc>"+p +vnoremap <C-v> "+p + + +" Manage 80 char line limits +highlight OverLength ctermbg=White ctermfg=Black +match OverLength /\%81v.\+/ +set wrap! + + +" Toggle word-wrapping +nnoremap <leader>w :set wrap!<CR> + + +" Resize split to 10,20,...,100 chars +" Uncomment the next lines for support at those sizes. +" These bindings interfere with the highlight groups, however. +" Increases the width of a vertical split. +" nnoremap <leader>1 :vertical resize 10<CR> +" nnoremap <leader>2 :vertical resize 20<CR> +nnoremap <leader>3 :vertical resize 30<CR> +nnoremap <leader>4 :vertical resize 40<CR> +nnoremap <leader>5 :vertical resize 50<CR> +nnoremap <leader>6 :vertical resize 60<CR> +nnoremap <leader>7 :vertical resize 70<CR> +nnoremap <leader>8 :vertical resize 80<CR> +nnoremap <leader>9 :vertical resize 90<CR> +nnoremap <leader>0 :vertical resize 100<CR> + + +" Increases the height of a horizontal split. +nnoremap <leader>v1 :resize 5<CR> +nnoremap <leader>v2 :resize 10<CR> +nnoremap <leader>v3 :resize 15<CR> +nnoremap <leader>v4 :resize 20<CR> +nnoremap <leader>v5 :resize 25<CR> +nnoremap <leader>v6 :resize 30<CR> +nnoremap <leader>v7 :resize 35<CR> +nnoremap <leader>v8 :resize 40<CR> + + +" NERDTree settings +" Show hidden files by default. (Toggle with capital 'i') +let NERDTreeShowHidden=1 + +" View Directory tree with ctrl + \ +nnoremap <C-\> :NERDTreeToggle<CR> + +" View open buffer location in tree. +nnoremap <C-o> :NERDTreeFind<CR> + + +" BOL and EOL +nnoremap H ^ +vnoremap H ^ +nnoremap L $ +vnoremap L $ + + +" trim trailing whitespace on save +autocmd BufWritePre *.{js,py,tpl,less,html} :%s/\s\+$//e + + +" set default font and size +set guifont=Operator\ Mono:h16 + + +" CtrlP Config. +set runtimepath^=~/.vim/bundle/ctrlp.vim +" let g:ctrlp_map = '<c-p>' +let g:ctrlp_cmd = 'CtrlP' + +" Maps CtrlP to leader to future-proof config. +nnoremap <leader>p :CtrlP<CR> + +" Fuzzy-finds files within cwd. +" nnoremap <leader>pf :CtrlP<CR> + +" Ignores dirs and files +let g:ctrlp_custom_ignore = { + \ 'dir': 'node_modules', + \ 'file': '\v\.(exe|dll|png|jpg|jpeg)$' +\} + |