Squashed 'third_party/git/' content from commit cb71568594

git-subtree-dir: third_party/git
git-subtree-split: cb715685942260375e1eb8153b0768a376e4ece7

1 files changed, 410 insertions, 0 deletions

diff --git a/trace2.h b/trace2.h
new file mode 100644
index 0000000000..050bf3c8c1
--- /dev/null
+++ b/trace2.h
@@ -0,0 +1,410 @@
+#ifndef TRACE2_H
+#define TRACE2_H
+
+struct child_process;
+struct repository;
+struct json_writer;
+
+/*
+ * The public TRACE2 routines are grouped into the following groups:
+ *
+ * [] trace2_initialize -- initialization.
+ * [] trace2_cmd_*      -- emit command/control messages.
+ * [] trace2_child*     -- emit child start/stop messages.
+ * [] trace2_exec*      -- emit exec start/stop messages.
+ * [] trace2_thread*    -- emit thread start/stop messages.
+ * [] trace2_def*       -- emit definition/parameter mesasges.
+ * [] trace2_region*    -- emit region nesting messages.
+ * [] trace2_data*      -- emit region/thread/repo data messages.
+ * [] trace2_printf*    -- legacy trace[1] messages.
+ */
+
+/*
+ * Initialize the TRACE2 clock and do nothing else, in particular
+ * no mallocs, no system inspection, and no environment inspection.
+ *
+ * This should be called at the very top of main() to capture the
+ * process start time.  This is intended to reduce chicken-n-egg
+ * bootstrap pressure.
+ *
+ * It is safe to call this more than once.  This allows capturing
+ * absolute startup costs on Windows which uses a little trickery
+ * to do setup work before common-main.c:main() is called.
+ *
+ * The main trace2_initialize_fl() may be called a little later
+ * after more infrastructure is established.
+ */
+void trace2_initialize_clock(void);
+
+/*
+ * Initialize TRACE2 tracing facility if any of the builtin TRACE2
+ * targets are enabled in the system config or the environment.
+ * Emits a 'version' event.
+ *
+ * Cleanup/Termination is handled automatically by a registered
+ * atexit() routine.
+ */
+void trace2_initialize_fl(const char *file, int line);
+
+#define trace2_initialize() trace2_initialize_fl(__FILE__, __LINE__)
+
+/*
+ * Return true if trace2 is enabled.
+ */
+int trace2_is_enabled(void);
+
+/*
+ * Emit a 'start' event with the original (unmodified) argv.
+ */
+void trace2_cmd_start_fl(const char *file, int line, const char **argv);
+
+#define trace2_cmd_start(argv) trace2_cmd_start_fl(__FILE__, __LINE__, (argv))
+
+/*
+ * Emit an 'exit' event.
+ *
+ * Write the exit-code that will be passed to exit() or returned
+ * from main().
+ *
+ * Use this prior to actually calling exit().
+ * See "#define exit()" in git-compat-util.h
+ */
+int trace2_cmd_exit_fl(const char *file, int line, int code);
+
+#define trace2_cmd_exit(code) (trace2_cmd_exit_fl(__FILE__, __LINE__, (code)))
+
+/*
+ * Emit an 'error' event.
+ *
+ * Write an error message to the TRACE2 targets.
+ */
+void trace2_cmd_error_va_fl(const char *file, int line, const char *fmt,
+			    va_list ap);
+
+#define trace2_cmd_error_va(fmt, ap) \
+	trace2_cmd_error_va_fl(__FILE__, __LINE__, (fmt), (ap))
+
+/*
+ * Emit a 'pathname' event with the canonical pathname of the current process
+ * This gives post-processors a simple field to identify the command without
+ * having to parse the argv.  For example, to distinguish invocations from
+ * installed versus debug executables.
+ */
+void trace2_cmd_path_fl(const char *file, int line, const char *pathname);
+
+#define trace2_cmd_path(p) trace2_cmd_path_fl(__FILE__, __LINE__, (p))
+
+/*
+ * Emit a 'cmd_name' event with the canonical name of the command.
+ * This gives post-processors a simple field to identify the command
+ * without having to parse the argv.
+ */
+void trace2_cmd_name_fl(const char *file, int line, const char *name);
+
+#define trace2_cmd_name(v) trace2_cmd_name_fl(__FILE__, __LINE__, (v))
+
+/*
+ * Emit a 'cmd_mode' event to further describe the command being run.
+ * For example, "checkout" can checkout a single file or can checkout a
+ * different branch.  This gives post-processors a simple field to compare
+ * equivalent commands without having to parse the argv.
+ */
+void trace2_cmd_mode_fl(const char *file, int line, const char *mode);
+
+#define trace2_cmd_mode(sv) trace2_cmd_mode_fl(__FILE__, __LINE__, (sv))
+
+/*
+ * Emit an 'alias' expansion event.
+ */
+void trace2_cmd_alias_fl(const char *file, int line, const char *alias,
+			 const char **argv);
+
+#define trace2_cmd_alias(alias, argv) \
+	trace2_cmd_alias_fl(__FILE__, __LINE__, (alias), (argv))
+
+/*
+ * Emit one or more 'def_param' events for "interesting" configuration
+ * settings.
+ *
+ * Use the TR2_SYSENV_CFG_PARAM setting to register a comma-separated
+ * list of patterns configured important.  For example:
+ *     git config --system trace2.configParams 'core.*,remote.*.url'
+ * or:
+ *     GIT_TRACE2_CONFIG_PARAMS=core.*,remote.*.url"
+ *
+ * Note: this routine does a read-only iteration on the config data
+ * (using read_early_config()), so it must not be called until enough
+ * of the process environment has been established.  This includes the
+ * location of the git and worktree directories, expansion of any "-c"
+ * and "-C" command line options, and etc.
+ */
+void trace2_cmd_list_config_fl(const char *file, int line);
+
+#define trace2_cmd_list_config() trace2_cmd_list_config_fl(__FILE__, __LINE__)
+
+/*
+ * Emit a "def_param" event for the given config key/value pair IF
+ * we consider the key to be "interesting".
+ *
+ * Use this for new/updated config settings created/updated after
+ * trace2_cmd_list_config() is called.
+ */
+void trace2_cmd_set_config_fl(const char *file, int line, const char *key,
+			      const char *value);
+
+#define trace2_cmd_set_config(k, v) \
+	trace2_cmd_set_config_fl(__FILE__, __LINE__, (k), (v))
+
+/*
+ * Emit a 'child_start' event prior to spawning a child process.
+ *
+ * Before calling optionally set "cmd->trace2_child_class" to a string
+ * describing the type of the child process.  For example, "editor" or
+ * "pager".
+ */
+void trace2_child_start_fl(const char *file, int line,
+			   struct child_process *cmd);
+
+#define trace2_child_start(cmd) trace2_child_start_fl(__FILE__, __LINE__, (cmd))
+
+/*
+ * Emit a 'child_exit' event after the child process completes.
+ */
+void trace2_child_exit_fl(const char *file, int line, struct child_process *cmd,
+			  int child_exit_code);
+
+#define trace2_child_exit(cmd, code) \
+	trace2_child_exit_fl(__FILE__, __LINE__, (cmd), (code))
+
+/*
+ * Emit an 'exec' event prior to calling one of exec(), execv(),
+ * execvp(), and etc.  On Unix-derived systems, this will be the
+ * last event emitted for the current process, unless the exec
+ * fails.  On Windows, exec() behaves like 'child_start' and a
+ * waitpid(), so additional events may be emitted.
+ *
+ * Returns the "exec_id".
+ */
+int trace2_exec_fl(const char *file, int line, const char *exe,
+		   const char **argv);
+
+#define trace2_exec(exe, argv) trace2_exec_fl(__FILE__, __LINE__, (exe), (argv))
+
+/*
+ * Emit an 'exec_result' when possible.  On Unix-derived systems,
+ * this should be called after exec() returns (which only happens
+ * when there is an error starting the new process).  On Windows,
+ * this should be called after the waitpid().
+ *
+ * The "exec_id" should be the value returned from trace2_exec().
+ */
+void trace2_exec_result_fl(const char *file, int line, int exec_id, int code);
+
+#define trace2_exec_result(id, code) \
+	trace2_exec_result_fl(__FILE__, __LINE__, (id), (code))
+
+/*
+ * Emit a 'thread_start' event.  This must be called from inside the
+ * thread-proc to set up the trace2 TLS data for the thread.
+ *
+ * Thread names should be descriptive, like "preload_index".
+ * Thread names will be decorated with an instance number automatically.
+ */
+void trace2_thread_start_fl(const char *file, int line,
+			    const char *thread_name);
+
+#define trace2_thread_start(thread_name) \
+	trace2_thread_start_fl(__FILE__, __LINE__, (thread_name))
+
+/*
+ * Emit a 'thread_exit' event.  This must be called from inside the
+ * thread-proc to report thread-specific data and cleanup TLS data
+ * for the thread.
+ */
+void trace2_thread_exit_fl(const char *file, int line);
+
+#define trace2_thread_exit() trace2_thread_exit_fl(__FILE__, __LINE__)
+
+/*
+ * Emit a 'param' event.
+ *
+ * Write a "<param> = <value>" pair describing some aspect of the
+ * run such as an important configuration setting or command line
+ * option that significantly changes command behavior.
+ */
+void trace2_def_param_fl(const char *file, int line, const char *param,
+			 const char *value);
+
+#define trace2_def_param(param, value) \
+	trace2_def_param_fl(__FILE__, __LINE__, (param), (value))
+
+/*
+ * Tell trace2 about a newly instantiated repo object and assign
+ * a trace2-repo-id to be used in subsequent activity events.
+ *
+ * Emits a 'worktree' event for this repo instance.
+ */
+void trace2_def_repo_fl(const char *file, int line, struct repository *repo);
+
+#define trace2_def_repo(repo) trace2_def_repo_fl(__FILE__, __LINE__, repo)
+
+/*
+ * Emit a 'region_enter' event for <category>.<label> with optional
+ * repo-id and printf message.
+ *
+ * Enter a new nesting level on the current thread and remember the
+ * current time.  This controls the indenting of all subsequent events
+ * on this thread.
+ */
+void trace2_region_enter_fl(const char *file, int line, const char *category,
+			    const char *label, const struct repository *repo, ...);
+
+#define trace2_region_enter(category, label, repo) \
+	trace2_region_enter_fl(__FILE__, __LINE__, (category), (label), (repo))
+
+void trace2_region_enter_printf_va_fl(const char *file, int line,
+				      const char *category, const char *label,
+				      const struct repository *repo,
+				      const char *fmt, va_list ap);
+
+#define trace2_region_enter_printf_va(category, label, repo, fmt, ap)    \
+	trace2_region_enter_printf_va_fl(__FILE__, __LINE__, (category), \
+					 (label), (repo), (fmt), (ap))
+
+void trace2_region_enter_printf_fl(const char *file, int line,
+				   const char *category, const char *label,
+				   const struct repository *repo,
+				   const char *fmt, ...);
+
+#ifdef HAVE_VARIADIC_MACROS
+#define trace2_region_enter_printf(category, label, repo, ...)                 \
+	trace2_region_enter_printf_fl(__FILE__, __LINE__, (category), (label), \
+				      (repo), __VA_ARGS__)
+#else
+/* clang-format off */
+__attribute__((format (region_enter_printf, 4, 5)))
+void trace2_region_enter_printf(const char *category, const char *label,
+				const struct repository *repo, const char *fmt,
+				...);
+/* clang-format on */
+#endif
+
+/*
+ * Emit a 'region_leave' event for <category>.<label> with optional
+ * repo-id and printf message.
+ *
+ * Leave current nesting level and report the elapsed time spent
+ * in this nesting level.
+ */
+void trace2_region_leave_fl(const char *file, int line, const char *category,
+			    const char *label, const struct repository *repo, ...);
+
+#define trace2_region_leave(category, label, repo) \
+	trace2_region_leave_fl(__FILE__, __LINE__, (category), (label), (repo))
+
+void trace2_region_leave_printf_va_fl(const char *file, int line,
+				      const char *category, const char *label,
+				      const struct repository *repo,
+				      const char *fmt, va_list ap);
+
+#define trace2_region_leave_printf_va(category, label, repo, fmt, ap)    \
+	trace2_region_leave_printf_va_fl(__FILE__, __LINE__, (category), \
+					 (label), (repo), (fmt), (ap))
+
+void trace2_region_leave_printf_fl(const char *file, int line,
+				   const char *category, const char *label,
+				   const struct repository *repo,
+				   const char *fmt, ...);
+
+#ifdef HAVE_VARIADIC_MACROS
+#define trace2_region_leave_printf(category, label, repo, ...)                 \
+	trace2_region_leave_printf_fl(__FILE__, __LINE__, (category), (label), \
+				      (repo), __VA_ARGS__)
+#else
+/* clang-format off */
+__attribute__((format (region_leave_printf, 4, 5)))
+void trace2_region_leave_printf(const char *category, const char *label,
+				const struct repository *repo, const char *fmt,
+				...);
+/* clang-format on */
+#endif
+
+/*
+ * Emit a key-value pair 'data' event of the form <category>.<key> = <value>.
+ * This event implicitly contains information about thread, nesting region,
+ * and optional repo-id.
+ *
+ * On event-based TRACE2 targets, this generates a 'data' event suitable
+ * for post-processing.  On printf-based TRACE2 targets, this is converted
+ * into a fixed-format printf message.
+ */
+void trace2_data_string_fl(const char *file, int line, const char *category,
+			   const struct repository *repo, const char *key,
+			   const char *value);
+
+#define trace2_data_string(category, repo, key, value)                       \
+	trace2_data_string_fl(__FILE__, __LINE__, (category), (repo), (key), \
+			      (value))
+
+void trace2_data_intmax_fl(const char *file, int line, const char *category,
+			   const struct repository *repo, const char *key,
+			   intmax_t value);
+
+#define trace2_data_intmax(category, repo, key, value)                       \
+	trace2_data_intmax_fl(__FILE__, __LINE__, (category), (repo), (key), \
+			      (value))
+
+void trace2_data_json_fl(const char *file, int line, const char *category,
+			 const struct repository *repo, const char *key,
+			 const struct json_writer *jw);
+
+#define trace2_data_json(category, repo, key, value)                       \
+	trace2_data_json_fl(__FILE__, __LINE__, (category), (repo), (key), \
+			    (value))
+
+/*
+ * Emit a 'printf' event.
+ *
+ * Write an arbitrary formatted message to the TRACE2 targets.  These
+ * text messages should be considered as human-readable strings without
+ * any formatting guidelines.  Post-processors may choose to ignore
+ * them.
+ */
+void trace2_printf_va_fl(const char *file, int line, const char *fmt,
+			 va_list ap);
+
+#define trace2_printf_va(fmt, ap) \
+	trace2_printf_va_fl(__FILE__, __LINE__, (fmt), (ap))
+
+void trace2_printf_fl(const char *file, int line, const char *fmt, ...);
+
+#ifdef HAVE_VARIADIC_MACROS
+#define trace2_printf(...) trace2_printf_fl(__FILE__, __LINE__, __VA_ARGS__)
+#else
+/* clang-format off */
+__attribute__((format (printf, 1, 2)))
+void trace2_printf(const char *fmt, ...);
+/* clang-format on */
+#endif
+
+/*
+ * Optional platform-specific code to dump information about the
+ * current and any parent process(es).  This is intended to allow
+ * post-processors to know who spawned this git instance and anything
+ * else that the platform may be able to tell us about the current process.
+ */
+
+enum trace2_process_info_reason {
+	TRACE2_PROCESS_INFO_STARTUP,
+	TRACE2_PROCESS_INFO_EXIT,
+};
+
+#if defined(GIT_WINDOWS_NATIVE)
+void trace2_collect_process_info(enum trace2_process_info_reason reason);
+#else
+#define trace2_collect_process_info(reason) \
+	do {                                \
+	} while (0)
+#endif
+
+#endif /* TRACE2_H */