This is magit.info, produced by makeinfo version 6.1 from magit.texi.
Copyright (C) 2015-2018 Jonas Bernoulli <jonas@bernoul.li>
You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
any later version.
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* Magit: (magit). Using Git from Emacs with Magit.
END-INFO-DIR-ENTRY
File: magit.info, Node: Top, Next: Introduction, Up: (dir)
Magit User Manual
*****************
Magit is an interface to the version control system Git, implemented as
an Emacs package. Magit aspires to be a complete Git porcelain. While
we cannot (yet) claim that Magit wraps and improves upon each and every
Git command, it is complete enough to allow even experienced Git users
to perform almost all of their daily version control tasks directly from
within Emacs. While many fine Git clients exist, only Magit and Git
itself deserve to be called porcelains.
This manual is for Magit version 2.13.0 (2.13.0-69-gbc8b275e+1).
Copyright (C) 2015-2018 Jonas Bernoulli <jonas@bernoul.li>
You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
any later version.
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
* Menu:
* Introduction::
* Installation::
* Getting Started::
* Interface Concepts::
* Inspecting::
* Manipulating::
* Transferring::
* Miscellaneous::
* Customizing::
* Plumbing::
* FAQ::
* Debugging Tools::
* Keystroke Index::
* Command Index::
* Function Index::
* Variable Index::
— The Detailed Node Listing —
Installation
* Installing from an Elpa Archive::
* Installing from the Git Repository::
* Post-Installation Tasks::
Interface Concepts
* Modes and Buffers::
* Sections::
* Popup Buffers and Prefix Commands::
* Completion, Confirmation and the Selection: Completion Confirmation and the Selection.
* Running Git::
Modes and Buffers
* Switching Buffers::
* Naming Buffers::
* Quitting Windows::
* Automatic Refreshing of Magit Buffers::
* Automatic Saving of File-Visiting Buffers::
* Automatic Reverting of File-Visiting Buffers::
Sections
* Section Movement::
* Section Visibility::
* Section Hooks::
* Section Types and Values::
* Section Options::
Completion, Confirmation and the Selection
* Action Confirmation::
* Completion and Confirmation::
* The Selection::
* The hunk-internal region::
* Support for Completion Frameworks::
* Additional Completion Options::
Running Git
* Viewing Git Output::
* Git Process Status::
* Running Git Manually::
* Git Executable::
* Global Git Arguments::
Inspecting
* Status Buffer::
* Repository List::
* Logging::
* Diffing::
* Ediffing::
* References Buffer::
* Bisecting::
* Visiting Blobs::
* Blaming::
Status Buffer
* Status Sections::
* Status Header Sections::
* Status Module Sections::
* Status Options::
Logging
* Refreshing Logs::
* Log Buffer::
* Log Margin::
* Select from Log::
* Reflog::
* Cherries::
Diffing
* Refreshing Diffs::
* Diff Buffer::
* Diff Options::
* Revision Buffer::
References Buffer
* References Sections::
Manipulating
* Repository Setup::
* Staging and Unstaging::
* Applying::
* Committing::
* Branching::
* Merging::
* Resolving Conflicts::
* Rebasing::
* Cherry Picking::
* Resetting::
* Stashing::
Staging and Unstaging
* Staging from File-Visiting Buffers::
Committing
* Initiating a Commit::
* Editing Commit Messages::
Branching
* The Two Remotes::
* The Branch Popup::
* The Branch Config Popup::
* Auxillary Branch Commands::
Rebasing
* Editing Rebase Sequences::
* Information About In-Progress Rebase::
Cherry Picking
* Reverting::
Transferring
* Remotes::
* Fetching::
* Pulling::
* Pushing::
* Creating and Sending Patches::
* Applying Patches::
Remotes
* The Remote Popup::
* The Remote Config Popup::
Miscellaneous
* Tagging::
* Notes::
* Submodules::
* Subtree::
* Worktree::
* Common Commands::
* Wip Modes::
* Minor Mode for Buffers Visiting Files::
* Minor Mode for Buffers Visiting Blobs::
Submodules
* Listing Submodules::
* Submodule Popup::
Customizing
* Per-Repository Configuration::
* Essential Settings::
Essential Settings
* Safety::
* Performance::
Plumbing
* Calling Git::
* Section Plumbing::
* Refreshing Buffers::
* Conventions::
Calling Git
* Getting a Value from Git::
* Calling Git for Effect::
Section Plumbing
* Creating Sections::
* Section Selection::
* Matching Sections::
Conventions
* Theming Faces::
FAQ
* FAQ - How to ...?::
* FAQ - Issues and Errors::
FAQ - How to ...?
* How to show git's output?::
* How to install the gitman info manual?::
* How to show diffs for gpg-encrypted files?::
* How does branching and pushing work?::
* Can Magit be used as ediff-version-control-package?::
FAQ - Issues and Errors
* Magit is slow::
* I changed several thousand files at once and now Magit is unusable::
* I am having problems committing::
* I am using MS Windows and cannot push with Magit::
* I am using OS X and SOMETHING works in shell, but not in Magit: I am using OS X and SOMETHING works in shell but not in Magit.
* Diffs contain control sequences::
* Expanding a file to show the diff causes it to disappear::
* Point is wrong in the COMMIT_EDITMSG buffer::
* The mode-line information isn't always up-to-date::
* A branch and tag sharing the same name breaks SOMETHING::
* My Git hooks work on the command-line but not inside Magit::
File: magit.info, Node: Introduction, Next: Installation, Prev: Top, Up: Top
1 Introduction
**************
Magit is an interface to the version control system Git, implemented as
an Emacs package. Magit aspires to be a complete Git porcelain. While
we cannot (yet) claim that Magit wraps and improves upon each and every
Git command, it is complete enough to allow even experienced Git users
to perform almost all of their daily version control tasks directly from
within Emacs. While many fine Git clients exist, only Magit and Git
itself deserve to be called porcelains.
Staging and otherwise applying changes is one of the most important
features in a Git porcelain and here Magit outshines anything else,
including Git itself. Git’s own staging interface (‘git add --patch’)
is so cumbersome that many users only use it in exceptional cases. In
Magit staging a hunk or even just part of a hunk is as trivial as
staging all changes made to a file.
The most visible part of Magit’s interface is the status buffer,
which displays information about the current repository. Its content is
created by running several Git commands and making their output
actionable. Among other things, it displays information about the
current branch, lists unpulled and unpushed changes and contains
sections displaying the staged and unstaged changes. That might sound
noisy, but, since sections are collapsible, it’s not.
To stage or unstage a change one places the cursor on the change and
then types ‘s’ or ‘u’. The change can be a file or a hunk, or when the
region is active (i.e. when there is a selection) several files or
hunks, or even just part of a hunk. The change or changes that these
commands - and many others - would act on are highlighted.
Magit also implements several other "apply variants" in addition to
staging and unstaging. One can discard or reverse a change, or apply it
to the working tree. Git’s own porcelain only supports this for staging
and unstaging and you would have to do something like ‘git diff ... |
??? | git apply ...’ to discard, revert, or apply a single hunk on the
command line. In fact that’s exactly what Magit does internally (which
is what lead to the term "apply variants").
Magit isn’t just for Git experts, but it does assume some prior
experience with Git as well as Emacs. That being said, many users have
reported that using Magit was what finally taught them what Git is
capable of and how to use it to its fullest. Other users wished they
had switched to Emacs sooner so that they would have gotten their hands
on Magit earlier.
While one has to know the basic features of Emacs to be able to make
full use of Magit, acquiring just enough Emacs skills doesn’t take long
and is worth it, even for users who prefer other editors. Vim users are
advised to give Evil (https://bitbucket.org/lyro/evil/wiki/Home), the
"Extensible VI Layer for Emacs", and Spacemacs
(https://github.com/syl20bnr/spacemacs), an "Emacs starter-kit focused
on Evil" a try.
Magit provides a consistent and efficient Git porcelain. After a
short learning period, you will be able to perform most of your daily
version control tasks faster than you would on the command line. You
will likely also start using features that seemed too daunting in the
past.
Magit fully embraces Git. It exposes many advanced features using a
simple but flexible interface instead of only wrapping the trivial ones
like many GUI clients do. Of course Magit supports logging, cloning,
pushing, and other commands that usually don’t fail in spectacular ways;
but it also supports tasks that often cannot be completed in a single
step. Magit fully supports tasks such as merging, rebasing,
cherry-picking, reverting, and blaming by not only providing a command
to initiate these tasks but also by displaying context sensitive
information along the way and providing commands that are useful for
resolving conflicts and resuming the sequence after doing so.
Magit wraps and in many cases improves upon at least the following
Git porcelain commands: ‘add’, ‘am’, ‘bisect’, ‘blame’, ‘branch’,
‘checkout’, ‘cherry’, ‘cherry-pick’, ‘clean’, ‘clone’, ‘commit’,
‘config’, ‘describe’, ‘diff’, ‘fetch’, ‘format-patch’, ‘init’, ‘log’,
‘merge’, ‘merge-tree’, ‘mv’, ‘notes’, ‘pull’, ‘rebase’, ‘reflog’,
‘remote’, ‘request-pull’, ‘reset’, ‘revert’, ‘rm’, ‘show’, ‘stash’,
‘submodule’, ‘subtree’, ‘tag’, and ‘worktree.’ Many more Magit porcelain
commands are implemented on top of Git plumbing commands.
File: magit.info, Node: Installation, Next: Getting Started, Prev: Introduction, Up: Top
2 Installation
**************
Magit can be installed using Emacs’ package manager or manually from its
development repository.
* Menu:
* Installing from an Elpa Archive::
* Installing from the Git Repository::
* Post-Installation Tasks::
File: magit.info, Node: Installing from an Elpa Archive, Next: Installing from the Git Repository, Up: Installation
2.1 Installing from an Elpa Archive
===================================
Magit is available from Melpa and Melpa-Stable. If you haven’t used
Emacs’ package manager before, then it is high time you familiarize
yourself with it by reading the documentation in the Emacs manual, see
*note (emacs)Packages::. Then add one of the archives to
‘package-archives’:
• To use Melpa:
(require 'package)
(add-to-list 'package-archives
'("melpa" . "http://melpa.org/packages/") t)
• To use Melpa-Stable:
(require 'package)
(add-to-list 'package-archives
'("melpa-stable" . "http://stable.melpa.org/packages/") t)
Once you have added your preferred archive, you need to update the
local package list using:
M-x package-refresh-contents RET
Once you have done that, you can install Magit and its dependencies
using:
M-x package-install RET magit RET
Now see *note Post-Installation Tasks::.
File: magit.info, Node: Installing from the Git Repository, Next: Post-Installation Tasks, Prev: Installing from an Elpa Archive, Up: Installation
2.2 Installing from the Git Repository
======================================
Magit depends on the ‘dash’, ‘magit-popup’, ‘ghub’ and ‘with-editor’
libraries which are available from Melpa and Melpa-Stable. Install them
using ‘M-x package-install RET <package> RET’. Of course you may also
install them manually from their development repository.
(An ancient release of Magit is also available from Marmalade, but no
new versions will be uploaded. Marmalade is unmaintained — its
maintainer has stopped responding to support requests from package
authors or even just to create new accounts so that new authors can
upload their packages in the first place.)
Then clone the Magit repository:
$ git clone https://github.com/magit/magit.git ~/.emacs.d/site-lisp/magit
$ cd ~/.emacs.d/site-lisp/magit
Then compile the libraries and generate the info manuals:
$ make
If you haven’t installed ‘dash’, ‘magit-popup’, ‘ghub’ and
‘with-editor’ from Melpa or at ‘/path/to/magit/../<package>’, then you
have to tell ‘make’ where to find them. To do so create the file
‘/path/to/magit/config.mk’ with the following content before running
‘make’:
LOAD_PATH = -L /path/to/magit/lisp
LOAD_PATH += -L /path/to/dash
LOAD_PATH += -L /path/to/magit-popup
LOAD_PATH += -L /path/to/ghub
LOAD_PATH += -L /path/to/with-editor
Finally add this to your init file:
(add-to-list 'load-path "~/.emacs.d/site-lisp/magit/lisp")
(require 'magit)
(with-eval-after-load 'info
(info-initialize)
(add-to-list 'Info-directory-list
"~/.emacs.d/site-lisp/magit/Documentation/"))
Note that you have to add the ‘lisp’ subdirectory to the ‘load-path’,
not the top-level of the repository, and that elements of ‘load-path’
should not end with a slash, while those of ‘Info-directory-list’
should.
Instead of requiring the feature ‘magit’, you could load just the
autoload definitions, by loading the file ‘magit-autoloads.el’.
(load "/path/to/magit/lisp/magit-autoloads")
Instead of running Magit directly from the repository by adding that
to the ‘load-path’, you might want to instead install it in some other
directory using ‘sudo make install’ and setting ‘load-path’ accordingly.
To update Magit use:
$ git pull
$ make
At times it might be necessary to run ‘make clean all’ instead.
To view all available targets use ‘make help’.
Now see *note Post-Installation Tasks::.
File: magit.info, Node: Post-Installation Tasks, Prev: Installing from the Git Repository, Up: Installation
2.3 Post-Installation Tasks
===========================
After installing Magit you should verify that you are indeed using the
Magit, Git, and Emacs releases you think you are using. It’s best to
restart Emacs before doing so, to make sure you are not using an
outdated value for ‘load-path’.
M-x magit-version RET
should display something like
Magit 2.8.0, Git 2.10.2, Emacs 25.1.1, gnu/linux
Then you might also want to read about options that many users likely
want to customize. See *note Essential Settings::.
To be able to follow cross references to Git manpages found in this
manual, you might also have to manually install the ‘gitman’ info
manual, or advice ‘Info-follow-nearest-node’ to instead open the actual
manpage. See *note How to install the gitman info manual?::.
If you are completely new to Magit then see *note Getting Started::.
If you run into problems, then please see the *note FAQ::. Also see
the *note Debugging Tools::.
And last but not least please consider making a donation, to ensure
that I can keep working on Magit. See <https://magit.vc/donations>.
for various donation options.
File: magit.info, Node: Getting Started, Next: Interface Concepts, Prev: Installation, Up: Top
3 Getting Started
*****************
This short tutorial describes the most essential features that many
Magitians use on a daily basis. It only scratches the surface but
should be enough to get you started.
IMPORTANT: It is safest if you clone some repository just for this
tutorial. Alternatively you can use an existing local repository, but
if you do that, then you should commit all uncommitted changes before
proceeding.
To display information about the current Git repository, type ‘M-x
magit-status RET’. You will be using this command a lot, and should
therefore give it a global key binding. This is what we recommend:
(global-set-key (kbd "C-x g") 'magit-status)
Most Magit commands are commonly invoked from the status buffer. It
can be considered the primary interface for interacting with Git using
Magit. Many other Magit buffers may exist at a given time, but they are
often created from this buffer.
Depending on what state your repository is in, this buffer may
contain sections titled "Staged changes", "Unstaged changes", "Unmerged
into origin/master", "Unpushed to origin/master", and many others.
Since we are starting from a safe state, which you can easily return
to (by doing a ‘git reset --hard PRE-MAGIT-STATE’), there currently are
not staged or unstaged changes. Edit some files and save the changes.
Then go back to the status buffer, while at the same time refreshing it,
by typing ‘C-x g’. (When the status buffer, or any Magit buffer for
that matter, is the current buffer, then you can also use just ‘g’ to
refresh it).
Move between sections using ‘p’ and ‘n’. Note that the bodies of
some sections are hidden. Type ‘TAB’ to expand or collapse the section
at point. You can also use ‘C-tab’ to cycle the visibility of the
current section and its children. Move to a file section inside the
section named "Unstaged changes" and type ‘s’ to stage the changes you
have made to that file. That file now appears under "Staged changes".
Magit can stage and unstage individual hunks, not just complete
files. Move to the file you have just staged, expand it using ‘TAB’,
move to one of the hunks using ‘n’, and unstage just that by typing ‘u’.
Note how the staging (‘s’) and unstaging (‘u’) commands operate on the
change at point. Many other commands behave the same way.
You can also un-/stage just part of a hunk. Inside the body of a
hunk section (move there using ‘C-n’), set the mark using ‘C-SPC’ and
move down until some added and/or removed lines fall inside the region
but not all of them. Again type ‘s’ to stage.
It is also possible to un-/stage multiple files at once. Move to a
file section, type ‘C-SPC’, move to the next file using ‘n’, and then
‘s’ to stage both files. Note that both the mark and point have to be
on the headings of sibling sections for this to work. If the region
looks like it does in other buffers, then it doesn’t select Magit
sections that can be acted on as a unit.
And then of course you want to commit your changes. Type ‘c’. This
shows the committing popup buffer featuring various commit variants and
arguments that can be passed to ‘git commit’. Do not worry about those
for now. We want to create a "normal" commit, which is done by typing
‘c’ again.
Now two new buffers appear. One is for writing the commit message,
the other shows a diff with the changes that you are about to committed.
Write a message and then type ‘C-c C-c’ to actually create the commit.
You probably don’t want to push the commit you just created because
you just committed some random changes, but if that is not the case you
could push it by typing ‘P’ to bring up the push popup and then ‘p’ to
push to a branch with the same name as the local branch onto the remote
configured as the push-remote. (If the push-remote is not configured
yet, then you would first be prompted for the remote to push to.)
So far we have mentioned the commit, push, and log popups. These are
probably among the popups you will be using the most, but many others
exist. To show a popup that lists all other popups (as well as the
various apply commands and some other fundamental commands), type ‘h’.
Try a few.
The key bindings in that popup correspond to the bindings in Magit
buffers, including but not limited to the status buffer. So you could
type ‘h d’ to bring up the diff popup, but once you remember that "d"
stands for "diff", you would usually do so by just typing ‘d’. But the
"popup of popups" is useful even once you have memorized all the
bindings, as it can provide easy access to Magit commands from non-Magit
buffers. You should create a global key binding for this command too:
(global-set-key (kbd "C-x M-g") 'magit-dispatch-popup)
In the same vein, you might also want to enable
‘global-magit-file-mode’ to get some more Magit key bindings in regular
file-visiting buffers (see *note Minor Mode for Buffers Visiting
Files::).
It is not necessary that you do so now, but if you stick with Magit,
then it is highly recommended that you read the next section too.
File: magit.info, Node: Interface Concepts, Next: Inspecting, Prev: Getting Started, Up: Top
4 Interface Concepts
********************
* Menu:
* Modes and Buffers::
* Sections::
* Popup Buffers and Prefix Commands::
* Completion, Confirmation and the Selection: Completion Confirmation and the Selection.
* Running Git::
File: magit.info, Node: Modes and Buffers, Next: Sections, Up: Interface Concepts
4.1 Modes and Buffers
=====================
Magit provides several major-modes. For each of these modes there
usually exists only one buffer per repository. Separate modes and thus
buffers exist for commits, diffs, logs, and some other things.
Besides these special purpose buffers, there also exists an overview
buffer, called the *status buffer*. Its usually from this buffer that
the user invokes Git commands, or creates or visits other buffers.
In this manual we often speak about "Magit buffers". By that we mean
buffers whose major-modes derive from ‘magit-mode’.
‘M-x magit-toggle-buffer-lock’ (‘magit-toggle-buffer-lock’)
This command locks the current buffer to its value or if the buffer
is already locked, then it unlocks it.
Locking a buffer to its value prevents it from being reused to
display another value. The name of a locked buffer contains its
value, which allows telling it apart from other locked buffers and
the unlocked buffer.
Not all Magit buffers can be locked to their values, for example it
wouldn’t make sense to lock a status buffer.
There can only be a single unlocked buffer using a certain
major-mode per repository. So when a buffer is being unlocked and
another unlocked buffer already exists for that mode and
repository, then the former buffer is instead deleted and the
latter is displayed in its place.
* Menu:
* Switching Buffers::
* Naming Buffers::
* Quitting Windows::
* Automatic Refreshing of Magit Buffers::
* Automatic Saving of File-Visiting Buffers::
* Automatic Reverting of File-Visiting Buffers::
File: magit.info, Node: Switching Buffers, Next: Naming Buffers, Up: Modes and Buffers
4.1.1 Switching Buffers
-----------------------
-- Function: magit-display-buffer buffer
This function is a wrapper around ‘display-buffer’ and is used to
display any Magit buffer. It displays BUFFER in some window and,
unlike ‘display-buffer’, also selects that window, provided
‘magit-display-buffer-noselect’ is ‘nil’. It also runs the hooks
mentioned below.
-- Variable: magit-display-buffer-noselect
When this is non-nil, then ‘magit-display-buffer’ only displays the
buffer but forgoes also selecting the window. This variable should
not be set globally, it is only intended to be let-bound, by code
that automatically updates "the other window". This is used for
example when the revision buffer is updated when you move inside
the log buffer.
-- User Option: magit-display-buffer-function
The function specified here is called by ‘magit-display-buffer’
with one argument, a buffer, to actually display that buffer. This
function should call ‘display-buffer’ with that buffer as first and
a list of display actions as second argument.
Magit provides several functions, listed below, that are suitable
values for this option. If you want to use different rules, then a
good way of doing that is to start with a copy of one of these
functions and then adjust it to your needs.
Instead of using a wrapper around ‘display-buffer’, that function
itself can be used here, in which case the display actions have to
be specified by adding them to ‘display-buffer-alist’ instead.
To learn about display actions, see *note (elisp)Choosing a Window
for Display::.
-- Function: magit-display-buffer-traditional buffer
This function is the current default value of the option
‘magit-display-buffer-function’. Before that option and this
function were added, the behavior was hard-coded in many places all
over the code base but now all the rules are contained in this one
function (except for the "noselect" special case mentioned above).
-- Function: magit-display-buffer-same-window-except-diff-v1
This function displays most buffers in the currently selected
window. If a buffer’s mode derives from ‘magit-diff-mode’ or
‘magit-process-mode’, it is displayed in another window.
-- Function: magit-display-buffer-fullframe-status-v1
This function fills the entire frame when displaying a status
buffer. Otherwise, it behaves like
‘magit-display-buffer-traditional’.
-- Function: magit-display-buffer-fullframe-status-topleft-v1
This function fills the entire frame when displaying a status
buffer. It behaves like ‘magit-display-buffer-fullframe-status-v1’
except that it displays buffers that derive from ‘magit-diff-mode’
or ‘magit-process-mode’ to the top or left of the current buffer
rather than to the bottom or right. As a result, Magit buffers
tend to pop up on the same side as they would if
‘magit-display-buffer-traditional’ were in use.
-- Function: magit-display-buffer-fullcolumn-most-v1
This function displays most buffers so that they fill the entire
height of the frame. However, the buffer is displayed in another
window if (1) the buffer’s mode derives from ‘magit-process-mode’,
or (2) the buffer’s mode derives from ‘magit-diff-mode’, provided
that the mode of the current buffer derives from ‘magit-log-mode’
or ‘magit-cherry-mode’.
-- User Option: magit-pre-display-buffer-hook
This hook is run by ‘magit-display-buffer’ before displaying the
buffer.
-- Function: magit-save-window-configuration
This function saves the current window configuration. Later when
the buffer is buried, it may be restored by
‘magit-restore-window-configuration’.
-- User Option: magit-post-display-buffer-hook
This hook is run by ‘magit-display-buffer’ after displaying the
buffer.
-- Function: magit-maybe-set-dedicated
This function remembers if a new window had to be created to
display the buffer, or whether an existing window was reused. This
information is later used by ‘magit-mode-quit-window’, to determine
whether the window should be deleted when its last Magit buffer is
buried.
File: magit.info, Node: Naming Buffers, Next: Quitting Windows, Prev: Switching Buffers, Up: Modes and Buffers
4.1.2 Naming Buffers
--------------------
-- User Option: magit-generate-buffer-name-function
The function used to generate the names of Magit buffers.
Such a function should take the options
‘magit-uniquify-buffer-names’ as well as ‘magit-buffer-name-format’
into account. If it doesn’t, then should be clearly stated in the
doc-string. And if it supports %-sequences beyond those mentioned
in the doc-string of the option ‘magit-buffer-name-format’, then
its own doc-string should describe the additions.
-- Function: magit-generate-buffer-name-default-function mode
This function returns a buffer name suitable for a buffer whose
major-mode is MODE and which shows information about the repository
in which ‘default-directory’ is located.
This function uses ‘magit-buffer-name-format’ and supporting all of
the %-sequences mentioned the documentation of that option. It
also respects the option ‘magit-uniquify-buffer-names’.
-- User Option: magit-buffer-name-format
The format string used to name Magit buffers.
At least the following %-sequences are supported:
• ‘%m’
The name of the major-mode, but with the ‘-mode’ suffix
removed.
• ‘%M’
Like ‘%m’ but abbreviate ‘magit-status-mode’ as ‘magit’.
• ‘%v’
The value the buffer is locked to, in parentheses, or an empty
string if the buffer is not locked to a value.
• ‘%V’
Like ‘%v’, but the string is prefixed with a space, unless it
is an empty string.
• ‘%t’
The top-level directory of the working tree of the repository,
or if ‘magit-uniquify-buffer-names’ is non-nil an abbreviation
of that.
• ‘%x’
If ‘magit-uniquify-buffer-names’ is nil "*", otherwise the
empty string. Due to limitations of the ‘uniquify’ package,
buffer names must end with the path.
• ‘%T’
Obsolete, use "%t%x" instead. Like ‘%t’, but append an
asterisk if and only if ‘magit-uniquify-buffer-names’ is nil.
The value should always contain ‘%m’ or ‘%M’, ‘%v’ or ‘%V’, and
‘%t’ (or the obsolete ‘%T’). If ‘magit-uniquify-buffer-names’ is
non-nil, then the value must end with ‘%t’ or ‘%t%x’ (or the
obsolete ‘%T’). See issue #2841.
-- User Option: magit-uniquify-buffer-names
This option controls whether the names of Magit buffers are
uniquified. If the names are not being uniquified, then they
contain the full path of the top-level of the working tree of the
corresponding repository. If they are being uniquified, then they
end with the basename of the top-level, or if that would conflict
with the name used for other buffers, then the names of all these
buffers are adjusted until they no longer conflict.
This is done using the ‘uniquify’ package; customize its options to
control how buffer names are uniquified.
File: magit.info, Node: Quitting Windows, Next: Automatic Refreshing of Magit Buffers, Prev: Naming Buffers, Up: Modes and Buffers
4.1.3 Quitting Windows
----------------------
‘q’ (‘magit-mode-bury-buffer’)
This command buries the current Magit buffer. With a prefix
argument, it instead kills the buffer.
-- User Option: magit-bury-buffer-function
The function used to actually bury or kill the current buffer.
‘magit-mode-bury-buffer’ calls this function with one argument. If
the argument is non-nil, then the function has to kill the current
buffer. Otherwise it has to bury it alive. The default value
currently is ‘magit-restore-window-configuration’.
-- Function: magit-restore-window-configuration kill-buffer
Bury or kill the current buffer using ‘quit-window’, which is
called with KILL-BUFFER as first and the selected window as second
argument.
Then restore the window configuration that existed right before the
current buffer was displayed in the selected frame. Unfortunately
that also means that point gets adjusted in all the buffers, which
are being displayed in the selected frame.
-- Function: magit-mode-quit-window kill-buffer
Bury or kill the current buffer using ‘quit-window’, which is
called with KILL-BUFFER as first and the selected window as second
argument.
Then, if the window was originally created to display a Magit
buffer and the buried buffer was the last remaining Magit buffer
that was ever displayed in the window, then that is deleted.
File: magit.info, Node: Automatic Refreshing of Magit Buffers, Next: Automatic Saving of File-Visiting Buffers, Prev: Quitting Windows, Up: Modes and Buffers
4.1.4 Automatic Refreshing of Magit Buffers
-------------------------------------------
After running a command which may change the state of the current
repository, the current Magit buffer and the corresponding status buffer
are refreshed. The status buffer may optionally be automatically
refreshed whenever a buffer is saved to a file inside the respective
repository.
Automatically refreshing Magit buffers ensures that the displayed
information is up-to-date most of the time but can lead to a noticeable
delay in big repositories. Other Magit buffers are not refreshed to
keep the delay to a minimum and also because doing so can sometimes be
undesirable.
Buffers can also be refreshed explicitly, which is useful in buffers
that weren’t current during the last refresh and after changes were made
to the repository outside of Magit.
‘g’ (‘magit-refresh’)
This command refreshes the current buffer if its major mode derives
from ‘magit-mode’ as well as the corresponding status buffer.
If the option ‘magit-revert-buffers’ calls for it, then it also
reverts all unmodified buffers that visit files being tracked in
the current repository.
‘G’ (‘magit-refresh-all’)
This command refreshes all Magit buffers belonging to the current
repository and also reverts all unmodified buffers that visit files
being tracked in the current repository.
The file-visiting buffers are always reverted, even if
‘magit-revert-buffers’ is nil.
-- User Option: magit-refresh-buffer-hook
This hook is run in each Magit buffer that was refreshed during the
current refresh - normally the current buffer and the status
buffer.
-- User Option: magit-refresh-status-buffer
When this option is non-nil, then the status buffer is
automatically refreshed after running git for side-effects, in
addition to the current Magit buffer, which is always refreshed
automatically.
Only set this to nil after exhausting all other options to improve
performance.
-- Function: magit-after-save-refresh-status
This function is intended to be added to ‘after-save-hook’. After
doing that the corresponding status buffer is refreshed whenever a
buffer is saved to a file inside a repository.
Note that refreshing a Magit buffer is done by re-creating its
contents from scratch, which can be slow in large repositories. If
you are not satisfied with Magit’s performance, then you should
obviously not add this function to that hook.
File: magit.info, Node: Automatic Saving of File-Visiting Buffers, Next: Automatic Reverting of File-Visiting Buffers, Prev: Automatic Refreshing of Magit Buffers, Up: Modes and Buffers
4.1.5 Automatic Saving of File-Visiting Buffers
-----------------------------------------------
File-visiting buffers are by default saved at certain points in time.
This doesn’t guarantee that Magit buffers are always up-to-date, but,
provided one only edits files by editing them in Emacs and uses only
Magit to interact with Git, one can be fairly confident. When in doubt
or after outside changes, type ‘g’ (‘magit-refresh’) to save and refresh
explicitly.
-- User Option: magit-save-repository-buffers
This option controls whether file-visiting buffers are saved before
certain events.
If this is non-nil then all modified file-visiting buffers
belonging to the current repository may be saved before running
commands, before creating new Magit buffers, and before explicitly
refreshing such buffers. If this is ‘dontask’ then this is done
without user intervention. If it is ‘t’ then the user has to
confirm each save.
File: magit.info, Node: Automatic Reverting of File-Visiting Buffers, Prev: Automatic Saving of File-Visiting Buffers, Up: Modes and Buffers
4.1.6 Automatic Reverting of File-Visiting Buffers
--------------------------------------------------
By default Magit automatically reverts buffers that are visiting files
that are being tracked in a Git repository, after they have changed on
disk. When using Magit one often changes files on disk by running git,
i.e. "outside Emacs", making this a rather important feature.
For example, if you discard a change in the status buffer, then that
is done by running ‘git apply --reverse ...’, and Emacs considers the
file to have "changed on disk". If Magit did not automatically revert
the buffer, then you would have to type ‘M-x revert-buffer RET RET’ in
the visiting buffer before you could continue making changes.
-- User Option: magit-auto-revert-mode
When this mode is enabled, then buffers that visit tracked files,
are automatically reverted after the visited files changed on disk.
-- User Option: global-auto-revert-mode
When this mode is enabled, then any file-visiting buffer is
automatically reverted after the visited file changed on disk.
If you like buffers that visit tracked files to be automatically
reverted, then you might also like any buffer to be reverted, not
just those visiting tracked files. If that is the case, then
enable this mode _instead of_ ‘magit-auto-revert-mode’.
-- User Option: magit-auto-revert-immediately
This option controls whether Magit reverts buffers immediately.
If this is non-nil and either ‘global-auto-revert-mode’ or
‘magit-auto-revert-mode’ is enabled, then Magit immediately reverts
buffers by explicitly calling ‘auto-revert-buffers’ after running
git for side-effects.
If ‘auto-revert-use-notify’ is non-nil (and file notifications are
actually supported), then ‘magit-auto-revert-immediately’ does not
have to be non-nil, because the reverts happen immediately anyway.
If ‘magit-auto-revert-immediately’ and ‘auto-revert-use-notify’ are
both ‘nil’, then reverts happen after ‘auto-revert-interval’
seconds of user inactivity. That is not desirable.
-- User Option: auto-revert-use-notify
This option controls whether file notification functions should be
used. Note that this variable unfortunately defaults to ‘t’ even
on systems on which file notifications cannot be used.
-- User Option: magit-auto-revert-tracked-only
This option controls whether ‘magit-auto-revert-mode’ only reverts
tracked files or all files that are located inside Git
repositories, including untracked files and files located inside
Git’s control directory.
-- Command: auto-revert-mode
The global mode ‘magit-auto-revert-mode’ works by turning on this
local mode in the appropriate buffers (but
‘global-auto-revert-mode’ is implemented differently). You can
also turn it on or off manually, which might be necessary if Magit
does not notice that a previously untracked file now is being
tracked or vice-versa.
-- User Option: auto-revert-stop-on-user-input
This option controls whether the arrival of user input suspends the
automatic reverts for ‘auto-revert-interval’ seconds.
-- User Option: auto-revert-interval
This option controls for how many seconds Emacs waits before
resuming suspended reverts.
-- User Option: auto-revert-buffer-list-filter
This option specifies an additional filter used by
‘auto-revert-buffers’ to determine whether a buffer should be
reverted or not.
This option is provided by ‘magit’, which also redefines
‘auto-revert-buffers’ to respect it. Magit users who do not turn
on the local mode ‘auto-revert-mode’ themselves, are best served by
setting the value to ‘magit-auto-revert-repository-buffers-p’.
However the default is nil, to not disturb users who do use the
local mode directly. If you experience delays when running Magit
commands, then you should consider using one of the predicates
provided by Magit - especially if you also use Tramp.
Users who do turn on ‘auto-revert-mode’ in buffers in which Magit
doesn’t do that for them, should likely not use any filter. Users
who turn on ‘global-auto-revert-mode’, do not have to worry about
this option, because it is disregarded if the global mode is
enabled.
-- User Option: auto-revert-verbose
This option controls whether Emacs reports when a buffer has been
reverted.
The options with the ‘auto-revert-’ prefix are located in the Custom
group named ‘auto-revert’. The other, magit-specific, options are
located in the ‘magit’ group.
* Menu:
* Risk of Reverting Automatically::
File: magit.info, Node: Risk of Reverting Automatically, Up: Automatic Reverting of File-Visiting Buffers
Risk of Reverting Automatically
...............................
For the vast majority users automatically reverting file-visiting
buffers after they have changed on disk is harmless.
If a buffer is modified (i.e. it contains changes that haven’t been
saved yet), then Emacs would refuse to automatically revert it. If you
save a previously modified buffer, then that results in what is seen by
Git as an uncommitted change. Git would then refuse to carry out any
commands that would cause these changes to be lost. In other words, if
there is anything that could be lost, then either Git or Emacs would
refuse to discard the changes.
However if you do use file-visiting buffers as a sort of ad hoc
"staging area", then the automatic reverts could potentially cause data
loss. So far I have only heard from one user who uses such a workflow.
An example: You visit some file in a buffer, edit it, and save the
changes. Then, outside of Emacs (or at least not using Magit or by
saving the buffer) you change the file on disk again. At this point the
buffer is the only place where the intermediate version still exists.
You have saved the changes to disk, but that has since been overwritten.
Meanwhile Emacs considers the buffer to be unmodified (because you have
not made any changes to it since you last saved it to the visited file)
and therefore would not object to it being automatically reverted. At
this point an Auto-Revert mode would kick in. It would check whether
the buffer is modified and since that is not the case it would revert
it. The intermediate version would be lost. (Actually you could still
get it back using the ‘undo’ command.)
If your workflow depends on Emacs preserving the intermediate version
in the buffer, then you have to disable all Auto-Revert modes. But
please consider that such a workflow would be dangerous even without
using an Auto-Revert mode, and should therefore be avoided. If Emacs
crashed or if you quit Emacs by mistake, then you would also lose the
buffer content. There would be no autosave file still containing the
intermediate version (because that was deleted when you saved the
buffer) and you would not be asked whether you want to save the buffer
(because it isn’t modified).
File: magit.info, Node: Sections, Next: Popup Buffers and Prefix Commands, Prev: Modes and Buffers, Up: Interface Concepts
4.2 Sections
============
Magit buffers are organized into nested sections, which can be collapsed
and expanded, similar to how sections are handled in Org mode. Each
section also has a type, and some sections also have a value. For each
section type there can also be a local keymap, shared by all sections of
that type.
Taking advantage of the section value and type, many commands operate
on the current section, or when the region is active and selects
sections of the same type, all of the selected sections. Commands that
only make sense for a particular section type (as opposed to just
behaving differently depending on the type) are usually bound in section
type keymaps.
* Menu:
* Section Movement::
* Section Visibility::
* Section Hooks::
* Section Types and Values::
* Section Options::
File: magit.info, Node: Section Movement, Next: Section Visibility, Up: Sections
4.2.1 Section Movement
----------------------
To move within a section use the usual keys (‘C-p’, ‘C-n’, ‘C-b’, ‘C-f’
etc), whose global bindings are not shadowed. To move to another
section use the following commands.
‘p’ (‘magit-section-backward’)
When not at the beginning of a section, then move to the beginning
of the current section. At the beginning of a section, instead
move to the beginning of the previous visible section.
‘n’ (‘magit-section-forward’)
Move to the beginning of the next visible section.
‘M-p’ (‘magit-section-backward-siblings’)
Move to the beginning of the previous sibling section. If there is
no previous sibling section, then move to the parent section
instead.
‘M-n’ (‘magit-section-forward-siblings’)
Move to the beginning of the next sibling section. If there is no
next sibling section, then move to the parent section instead.
‘^’ (‘magit-section-up’)
Move to the beginning of the parent of the current section.
The above commands all call the hook ‘magit-section-movement-hook’.
Any of the functions listed below can be used as members of this hook.
-- Variable: magit-section-movement-hook
This hook is run by all of the above movement commands, after
arriving at the destination.
-- Function: magit-hunk-set-window-start
This hook function ensures that the beginning of the current
section is visible, provided it is a ‘hunk’ section. Otherwise, it
does nothing. This function is a member of the hook’s default
value.
-- Function: magit-section-set-window-start
This hook function ensures that the beginning of the current
section is visible, regardless of the section’s type. If you add
this to ‘magit-section-movement-hook’, then you must remove the
hunk-only variant in turn.
-- Function: magit-log-maybe-show-more-commits
This hook function only has an effect in log buffers, and ‘point’
is on the "show more" section. If that is the case, then it
doubles the number of commits that are being shown. This function
is a member of the hook’s default value.
-- Function: magit-log-maybe-update-revision-buffer
When moving inside a log buffer, then this function updates the
revision buffer, provided it is already being displayed in another
window of the same frame. This function is a member of the hook’s
default value.
-- Function: magit-log-maybe-update-blob-buffer
When moving inside a log buffer and another window of the same
frame displays a blob buffer, then this function instead displays
the blob buffer for the commit at point in that window.
-- Function: magit-status-maybe-update-revision-buffer
When moving inside a status buffer, then this function updates the
revision buffer, provided it is already being displayed in another
window of the same frame.
-- Function: magit-status-maybe-update-blob-buffer
When moving inside a status buffer and another window of the same
frame displays a blob buffer, then this function instead displays
the blob buffer for the commit at point in that window.
-- User Option: magit-update-other-window-delay
Delay before automatically updating the other window.
When moving around in certain buffers, then certain other buffers,
which are being displayed in another window, may optionally be
updated to display information about the section at point.
When holding down a key to move by more than just one section, then
that would update that buffer for each section on the way. To
prevent that, updating the revision buffer is delayed, and this
option controls for how long. For optimal experience you might
have to adjust this delay and/or the keyboard repeat rate and delay
of your graphical environment or operating system.
File: magit.info, Node: Section Visibility, Next: Section Hooks, Prev: Section Movement, Up: Sections
4.2.2 Section Visibility
------------------------
Magit provides many commands for changing the visibility of sections,
but all you need to get started are the next two.
‘TAB’ (‘magit-section-toggle’)
Toggle the visibility of the body of the current section.
‘C-<tab>’ (‘magit-section-cycle’)
Cycle the visibility of current section and its children.
‘M-<tab>’ (‘magit-section-cycle-diffs’)
Cycle the visibility of diff-related sections in the current
buffer.
‘S-<tab>’ (‘magit-section-cycle-global’)
Cycle the visibility of all sections in the current buffer.
‘1’ (‘magit-section-show-level-1’)
‘2’ (‘magit-section-show-level-2’)
‘3’ (‘magit-section-show-level-3’)
‘4’ (‘magit-section-show-level-4’)
Show sections surrounding the current section up to level N.
‘M-1’ (‘magit-section-show-level-1-all’)
‘M-2’ (‘magit-section-show-level-2-all’)
‘M-3’ (‘magit-section-show-level-3-all’)
‘M-4’ (‘magit-section-show-level-4-all’)
Show all sections up to level N.
Some functions, which are used to implement the above commands, are
also exposed as commands themselves. By default no keys are bound to
these commands, as they are generally perceived to be much less useful.
But your mileage may vary.
-- Command: magit-section-show
Show the body of the current section.
-- Command: magit-section-hide
Hide the body of the current section.
-- Command: magit-section-show-headings
Recursively show headings of children of the current section. Only
show the headings. Previously shown text-only bodies are hidden.
-- Command: magit-section-show-children
Recursively show the bodies of children of the current section.
With a prefix argument show children down to the level of the
current section, and hide deeper children.
-- Command: magit-section-hide-children
Recursively hide the bodies of children of the current section.
-- Command: magit-section-toggle-children
Toggle visibility of bodies of children of the current section.
When a buffer is first created then some sections are shown expanded
while others are not. This is hard coded. When a buffer is refreshed
then the previous visibility is preserved. The initial visibility of
certain sections can also be overwritten using the hook
‘magit-section-set-visibility-hook’.
-- User Option: magit-section-initial-visibility-alist
This options can be used to override the initial visibility of
sections. In the future it will also be used to define the
defaults, but currently a section’s default is still hardcoded.
The value is an alist. Each element maps a section type or lineage
to the initial visibility state for such sections. The state has
to be one of ‘show’ or ‘hide’, or a function that returns one of
these symbols. A function is called with the section as the only
argument.
Use the command ‘magit-describe-section’ to determine a section’s
lineage or type. The vector in the output is the section lineage
and the type is the first element of that vector. Wildcards can be
used, see ‘magit-section-match’.
-- User Option: magit-section-cache-visibility
This option controls for which sections the previous visibility
state should be restored if a section disappears and later appears
again. The value is a boolean or a list of section types. If t,
then the visibility of all sections is cached. Otherwise this is
only done for sections whose type matches one of the listed types.
This requires that the function ‘magit-section-cached-visibility’
is a member of ‘magit-section-set-visibility-hook’.
-- Variable: magit-section-set-visibility-hook
This hook is run when first creating a buffer and also when
refreshing an existing buffer, and is used to determine the
visibility of the section currently being inserted.
Each function is called with one argument, the section being
inserted. It should return ‘hide’ or ‘show’, or to leave the
visibility undefined ‘nil’. If no function decides on the
visibility and the buffer is being refreshed, then the visibility
is preserved; or if the buffer is being created, then the hard
coded default is used.
Usually this should only be used to set the initial visibility but
not during refreshes. If ‘magit-insert-section--oldroot’ is
non-nil, then the buffer is being refreshed and these functions
should immediately return ‘nil’.
File: magit.info, Node: Section Hooks, Next: Section Types and Values, Prev: Section Visibility, Up: Sections
4.2.3 Section Hooks
-------------------
Which sections are inserted into certain buffers is controlled with
hooks. This includes the status and the refs buffers. For other
buffers, e.g. log, diff, and revision buffers, this is not possible.
For buffers whose sections can be customized by the user, a hook
variable called ‘magit-TYPE-sections-hook’ exists. This hook should be
changed using ‘magit-add-section-hook’. Avoid using ‘add-hooks’ or the
Custom interface.
The various available section hook variables are described later in
this manual along with the appropriate "section inserter functions".
-- Function: magit-add-section-hook hook function &optional at append
local
Add the function FUNCTION to the value of section hook HOOK.
Add FUNCTION at the beginning of the hook list unless optional
APPEND is non-nil, in which case FUNCTION is added at the end. If
FUNCTION already is a member then move it to the new location.
If optional AT is non-nil and a member of the hook list, then add
FUNCTION next to that instead. Add before or after AT, or replace
AT with FUNCTION depending on APPEND. If APPEND is the symbol
‘replace’, then replace AT with FUNCTION. For any other non-nil
value place FUNCTION right after AT. If nil, then place FUNCTION
right before AT. If FUNCTION already is a member of the list but
AT is not, then leave FUNCTION where ever it already is.
If optional LOCAL is non-nil, then modify the hook’s buffer-local
value rather than its global value. This makes the hook local by
copying the default value. That copy is then modified.
HOOK should be a symbol. If HOOK is void, it is first set to nil.
HOOK’s value must not be a single hook function. FUNCTION should
be a function that takes no arguments and inserts one or multiple
sections at point, moving point forward. FUNCTION may choose not
to insert its section(s), when doing so would not make sense. It
should not be abused for other side-effects.
To remove a function from a section hook, use ‘remove-hook’.
File: magit.info, Node: Section Types and Values, Next: Section Options, Prev: Section Hooks, Up: Sections
4.2.4 Section Types and Values
------------------------------
Each section has a type, for example ‘hunk’, ‘file’, and ‘commit’.
Instances of certain section types also have a value. The value of a
section of type ‘file’, for example, is a file name.
Users usually do not have to worry about a section’s type and value,
but knowing them can be handy at times.
‘M-x magit-describe-section’ (‘magit-describe-section’)
Show information about the section at point in the echo area, as
"VALUE [TYPE PARENT-TYPE...] BEGINNING-END".
Many commands behave differently depending on the type of the section
at point and/or somehow consume the value of that section. But that is
only one of the reasons why the same key may do something different,
depending on what section is current.
Additionally for each section type a keymap *might* be defined, named
‘magit-TYPE-section-map’. That keymap is used as text property keymap
of all text belonging to any section of the respective type. If such a
map does not exist for a certain type, then you can define it yourself,
and it will automatically be used.
File: magit.info, Node: Section Options, Prev: Section Types and Values, Up: Sections
4.2.5 Section Options
---------------------
This section describes options that have an effect on more than just a
certain type of sections. As you can see there are not many of those.
-- User Option: magit-section-show-child-count
Whether to append the number of children to section headings. This
only affects sections that could benefit from this information.
File: magit.info, Node: Popup Buffers and Prefix Commands, Next: Completion Confirmation and the Selection, Prev: Sections, Up: Interface Concepts
4.3 Popup Buffers and Prefix Commands
=====================================
Many Magit commands are implemented using *popup buffers*. First the
user invokes a *popup* or *prefix* command, which causes a popup buffer
with the available *infix* arguments and *suffix* commands to be
displayed. The user then optionally toggles/sets some arguments and
finally invokes one of the suffix commands.
This is implemented in the library ‘magit-popup’. Earlier releases
used the library ‘magit-key-mode’. A future release will switch to a
yet-to-be-written successor, which will likely be named ‘transient’.
Because ‘magit-popup’ can also be used by other packages without
having to depend on all of Magit, it is documented in its own manual.
See *note (magit-popup)Top::.
‘C-c C-c’ (‘magit-dispatch-popup’)
This popup command shows a buffer featuring all other Magit popup
commands as well as some other commands that are not popup commands
themselves.
This command is also, or especially, useful outside Magit buffers, so
you should setup a global binding:
(global-set-key (kbd "C-x M-g") 'magit-dispatch-popup)
Most popups set their initial arguments according to the
corresponding ‘magit-*-arguments’ variable. Two popups, the log and
diff popups (see *note Logging:: and *note Diffing::), may behave a bit
differently, depending on the value of ‘magit-use-sticky-arguments’.
-- User Option: magit-use-sticky-arguments
This option controls how diff and log commands reuse arguments from
existing buffers.
When ‘t’ (the default value), the log or diff popup reuses the
arguments from the current repository’s log or diff buffer,
respectively. When no log or diff buffer exists for the current
repository, these popups use the default value of
‘magit-log-arguments’ or ‘magit-diff-arguments’.
When ‘current’, log and diff popups will only reuse the arguments
if the current buffer is derived from ‘magit-log-mode’ or
‘magit-diff-mode’, respectively.
When ‘nil’, the default value of ‘magit-log-arguments’ or
‘magit-diff-arguments’ is always used.
File: magit.info, Node: Completion Confirmation and the Selection, Next: Running Git, Prev: Popup Buffers and Prefix Commands, Up: Interface Concepts
4.4 Completion, Confirmation and the Selection
==============================================
* Menu:
* Action Confirmation::
* Completion and Confirmation::
* The Selection::
* The hunk-internal region::
* Support for Completion Frameworks::
* Additional Completion Options::
File: magit.info, Node: Action Confirmation, Next: Completion and Confirmation, Up: Completion Confirmation and the Selection
4.4.1 Action Confirmation
-------------------------
By default many actions that could potentially lead to data loss have to
be confirmed. This includes many very common actions, so this can
quickly become annoying. Many of these actions can be undone and if you
have thought about how to undo certain mistakes, then it should be safe
to disable confirmation for the respective actions.
The option ‘magit-no-confirm’ can be used to tell Magit to perform
certain actions without the user having to confirm them. Note that
while this option can only be used to disable confirmation for a
specific set of actions, the next section explains another way of
telling Magit to ask fewer questions.
-- User Option: magit-no-confirm
The value of this option is a list of symbols, representing actions
that do not have to be confirmed by the user before being carried
out.
By default many potentially dangerous commands ask the user for
confirmation. Each of the below symbols stands for an action
which, when invoked unintentionally or without being fully aware of
the consequences, could lead to tears. In many cases there are
several commands that perform variations of a certain action, so we
don’t use the command names but more generic symbols.
• Applying changes:
• ‘discard’ Discarding one or more changes (i.e. hunks or
the complete diff for a file) loses that change,
obviously.
• ‘reverse’ Reverting one or more changes can usually be
undone by reverting the reversion.
• ‘stage-all-changes’, ‘unstage-all-changes’ When there are
both staged and unstaged changes, then un-/staging
everything would destroy that distinction. Of course
that also applies when un-/staging a single change, but
then less is lost and one does that so often that having
to confirm every time would be unacceptable.
• Files:
• ‘delete’ When a file that isn’t yet tracked by Git is
deleted, then it is completely lost, not just the last
changes. Very dangerous.
• ‘trash’ Instead of deleting a file it can also be move to
the system trash. Obviously much less dangerous than
deleting it.
Also see option ‘magit-delete-by-moving-to-trash’.
• ‘resurrect’ A deleted file can easily be resurrected by
"deleting" the deletion, which is done using the same
command that was used to delete the same file in the
first place.
• ‘untrack’ Untracking a file can be undone by tracking it
again.
• ‘rename’ Renaming a file can easily be undone.
• Sequences:
• ‘reset-bisect’ Aborting (known to Git as "resetting") a
bisect operation loses all information collected so far.
• ‘abort-rebase’ Aborting a rebase throws away all already
modified commits, but it’s possible to restore those from
the reflog.
• ‘abort-merge’ Aborting a merge throws away all conflict
resolutions which have already been carried out by the
user.
• ‘merge-dirty’ Merging with a dirty worktree can make it
hard to go back to the state before the merge was
initiated.
• References:
• ‘delete-unmerged-branch’ Once a branch has been deleted,
it can only be restored using low-level recovery tools
provided by Git. And even then the reflog is gone. The
user always has to confirm the deletion of a branch by
accepting the default choice (or selecting another
branch), but when a branch has not been merged yet, also
make sure the user is aware of that.
• ‘delete-pr-branch’ When deleting a branch that was
created from a pull request and if no other branches
still exist on that remote, then ‘magit-branch-delete’
offers to delete the remote as well. This should be safe
because it only happens if no other refs exist in the
remotes namespace, and you can recreate the remote if
necessary.
• ‘drop-stashes’ Dropping a stash is dangerous because Git
stores stashes in the reflog. Once a stash is removed,
there is no going back without using low-level recovery
tools provided by Git. When a single stash is dropped,
then the user always has to confirm by accepting the
default (or selecting another). This action only
concerns the deletion of multiple stashes at once.
• Edit published history:
Without adding these symbols here, you will be warned before
editing commits that have already been pushed to one of the
branches listed in ‘magit-published-branches’.
• ‘amend-published’ Affects most commands that amend to
"HEAD".
• ‘rebase-published’ Affects commands that perform
interactive rebases. This includes commands from the
commit popup that modify a commit other than "HEAD",
namely the various fixup and squash variants.
• ‘edit-published’ Affects the commands
‘magit-edit-line-commit’ and
‘magit-diff-edit-hunk-commit’. These two commands make
it quite easy to accidentally edit a published commit, so
you should think twice before configuring them not to ask
for confirmation.
To disable confirmation completely, add all three symbols here
or set ‘magit-published-branches’ to ‘nil’.
• Various:
• ‘kill-process’ There seldom is a reason to kill a
process.
• Global settings:
Instead of adding all of the above symbols to the value of
this option, you can also set it to the atom ‘t’, which has
the same effect as adding all of the above symbols. Doing
that most certainly is a bad idea, especially because other
symbols might be added in the future. So even if you don’t
want to be asked for confirmation for any of these actions,
you are still better of adding all of the respective symbols
individually.
When ‘magit-wip-before-change-mode’ is enabled, then the
following actions can be undone fairly easily: ‘discard’,
‘reverse’, ‘stage-all-changes’, and ‘unstage-all-changes’. If
and only if this mode is enabled, then ‘safe-with-wip’ has the
same effect as adding all of these symbols individually.
File: magit.info, Node: Completion and Confirmation, Next: The Selection, Prev: Action Confirmation, Up: Completion Confirmation and the Selection
4.4.2 Completion and Confirmation
---------------------------------
Many Magit commands ask the user to select from a list of possible
things to act on, while offering the most likely choice as the default.
For many of these commands the default is the thing at point, provided
that it actually is a valid thing to act on. For many commands that act
on a branch, the current branch serves as the default if there is no
branch at point.
These commands combine asking for confirmation and asking for a
target to act on into a single action. The user can confirm the default
target using ‘RET’ or abort using ‘C-g’. This is similar to a
‘y-or-n-p’ prompt, but the keys to confirm or abort differ.
At the same time the user is also given the opportunity to select
another target, which is useful because for some commands and/or in some
situations you might want to select the action before selecting the
target by moving to it.
However you might find that for some commands you always want to use
the default target, if any, or even that you want the command to act on
the default without requiring any confirmation at all. The option
‘magit-dwim-selection’ can be used to configure certain commands to that
effect.
Note that when the region is active then many commands act on the
things that are selected using a mechanism based on the region, in many
cases after asking for confirmation. This region-based mechanism is
called the "selection" and is described in detail in the next section.
When a selection exists that is valid for the invoked command, then that
command never offers to act on something else, and whether it asks for
confirmation is not controlled by this option.
Also note that Magit asks for confirmation of certain actions that
are not coupled with completion (or the selection). Such dialogs are
also not affected by this option and are described in the previous
section.
-- User Option: magit-dwim-selection
This option can be used to tell certain commands to use the thing at
point instead of asking the user to select a candidate to act on, with
or without confirmation.
The value has the form ‘((COMMAND nil|PROMPT DEFAULT)...)’.
• COMMAND is the command that should not prompt for a choice. To
have an effect, the command has to use the function
‘magit-completing-read’ or a utility function which in turn uses
that function.
• If the command uses ‘magit-completing-read’ multiple times, then
PROMPT can be used to only affect one of these uses. PROMPT, if
non-nil, is a regular expression that is used to match against the
PROMPT argument passed to ‘magit-completing-read’.
• DEFAULT specifies how to use the default. If it is ‘t’, then the
DEFAULT argument passed to ‘magit-completing-read’ is used without
confirmation. If it is ‘ask’, then the user is given a chance to
abort. DEFAULT can also be ‘nil’, in which case the entry has no
effect.
File: magit.info, Node: The Selection, Next: The hunk-internal region, Prev: Completion and Confirmation, Up: Completion Confirmation and the Selection
4.4.3 The Selection
-------------------
If the region is active, then many Magit commands act on the things that
are selected using a mechanism based on the region instead of one single
thing. When the region is not active, then these commands act on the
thing at point or read a single thing to act on. This is described in
the previous section — this section only covers how multiple things are
selected, how that is visualized, and how certain commands behave when
that is the case.
Magit’s mechanism for selecting multiple things, or rather sections
that represent these things, is based on the Emacs region, but the area
that Magit considers to be selected is typically larger than the region
and additional restrictions apply.
Magit makes a distinction between a region that qualifies as forming
a valid Magit selection and a region that does not. If the region does
not qualify, then it is displayed as it is in other Emacs buffers. If
the region does qualify as a Magit selection, then the selection is
always visualized, while the region itself is only visualized if it
begins and ends on the same line.
For a region to qualify as a Magit selection, it must begin in the
heading of one section and end in the heading of a sibling section.
Note that if the end of the region is at the very beginning of section
heading (i.e. at the very beginning of a line) then that section is
considered to be *inside* the selection.
This is not consistent with how the region is normally treated in
Emacs — if the region ends at the beginning of a line, then that line is
outside the region. Due to how Magit visualizes the selection, it
should be obvious that this difference exists.
Not every command acts on every valid selection. Some commands do
not even consider the location of point, others may act on the section
at point but not support acting on the selection, and even commands that
do support the selection of course only do so if it selects things that
they can act on.
This is the main reason why the selection must include the section at
point. Even if a selection exists, the invoked command may disregard
it, in which case it may act on the current section only. It is much
safer to only act on the current section but not the other selected
sections than it is to act on the current section *instead* of the
selected sections. The latter would be much more surprising and if the
current section always is part of the selection, then that cannot
happen.
-- Variable: magit-keep-region-overlay
This variable controls whether the region is visualized as usual
even when a valid Magit selection or a hunk-internal region exists.
See the doc-string for more information.
File: magit.info, Node: The hunk-internal region, Next: Support for Completion Frameworks, Prev: The Selection, Up: Completion Confirmation and the Selection
4.4.4 The hunk-internal region
------------------------------
Somewhat related to the Magit selection described in the previous
section is the hunk-internal region.
Like the selection, the hunk-internal region is based on the Emacs
region but causes that region to not be visualized as it would in other
Emacs buffers, and includes the line on which the region ends even if it
ends at the very beginning of that line.
Unlike the selection, which is based on a region that must begin in
the heading of one section and ends in the section of a sibling section,
the hunk-internal region must begin inside the *body* of a hunk section
and end in the body of the *same* section.
The hunk-internal region is honored by "apply" commands, which can,
among other targets, act on a hunk. If the hunk-internal region is
active, then such commands act only on the marked part of the hunk
instead of on the complete hunk.
File: magit.info, Node: Support for Completion Frameworks, Next: Additional Completion Options, Prev: The hunk-internal region, Up: Completion Confirmation and the Selection
4.4.5 Support for Completion Frameworks
---------------------------------------
The built-in option ‘completing-read-function’ specifies the low-level
function used by ‘completing-read’ to ask a user to select from a list
of choices. Its default value is ‘completing-read-default’.
Alternative completion frameworks typically activate themselves by
substituting their own implementation.
Mostly for historic reasons Magit provides a similar option named
‘magit-completing-read-function’, which only controls the low-level
function used by ‘magit-completing-read’. This option also makes it
possible to use a different completing mechanism for Magit than for the
rest of Emacs, but doing that is not recommend.
You most likely don’t have to customize the magit-specific option to
use an alternative completion framework. For example, if you enable
‘ivy-mode’, then Magit will respect that, and if you enable ‘helm-mode’,
then you are done too.
However if you want to use Ido, then ‘ido-mode’ won’t do the trick.
You will also have to install the ‘ido-completing-read+’ package and use
‘magit-ido-completing-read’ as ‘magit-completing-read-function’.
-- User Option: magit-completing-read-function
The value of this variable is the low-level function used to
perform completion by code that uses ‘magit-completing-read’ (as
opposed to the built-in ‘completing-read’).
The default value, ‘magit-builtin-completing-read’, is suitable for
the standard completion mechanism, ‘ivy-mode’, and ‘helm-mode’ at
least.
The built-in ‘completing-read’ and ‘completing-read-default’ are
*not* suitable to be used here. ‘magit-builtin-completing-read’
performs some additional work, and any function used in its place
has to do the same.
-- Function: magit-builtin-completing-read prompt choices &optional
predicate require-match initial-input hist def
This function performs completion using the built-in
‘completion-read’ and does some additional magit-specific work.
-- Function: magit-ido-completing-read prompt choices &optional
predicate require-match initial-input hist def
This function performs completion using ‘ido-completing-read+’ from
the package by the same name (which you have to explicitly install)
and does some additional magit-specific work.
We have to use ‘ido-completing-read+’ instead of the
‘ido-completing-read’ that comes with Ido itself, because the
latter, while intended as a drop-in replacement, cannot serve that
purpose because it violates too many of the implicit conventions.
-- Function: magit-completing-read prompt choices &optional predicate
require-match initial-input hist def fallback
This is the function that Magit commands use when they need the
user to select a single thing to act on. The arguments have the
same meaning as for ‘completing-read’, except for FALLBACK, which
is unique to this function and is described below.
Instead of asking the user to choose from a list of possible
candidates, this function may just return the default specified by
DEF, with or without requiring user confirmation. Whether that is
the case depends on PROMPT, ‘this-command’ and
‘magit-dwim-selection’. See the documentation of the latter for
more information.
If it does read a value in the minibuffer, then this function acts
similar to ‘completing-read’, except for the following:
• If REQUIRE-MATCH is ‘nil’ and the user exits without a choice,
then ‘nil’ is returned instead of an empty string.
• If REQUIRE-MATCH is non-nil and the users exits without a
choice, an user-error is raised.
• FALLBACK specifies a secondary default that is only used if
the primary default DEF is ‘nil’. The secondary default is
not subject to ‘magit-dwim-selection’ — if DEF is ‘nil’ but
FALLBACK is not, then this function always asks the user to
choose a candidate, just as if both defaults were ‘nil’.
• ": " is appended to PROMPT.
• PROMPT is modified to end with \" (default DEF|FALLBACK): \"
provided that DEF or FALLBACK is non-nil, that neither
‘ivy-mode’ nor ‘helm-mode’ is enabled, and that
‘magit-completing-read-function’ is set to its default value
of ‘magit-builtin-completing-read’.
File: magit.info, Node: Additional Completion Options, Prev: Support for Completion Frameworks, Up: Completion Confirmation and the Selection
4.4.6 Additional Completion Options
-----------------------------------
-- User Option: magit-list-refs-sortby
For many commands that read a ref or refs from the user, the value
of this option can be used to control the order of the refs. Valid
values include any key accepted by the ‘--sort’ flag of ‘git
for-each-ref’. By default, refs are sorted alphabetically by their
full name (e.g., "refs/heads/master").
File: magit.info, Node: Running Git, Prev: Completion Confirmation and the Selection, Up: Interface Concepts
4.5 Running Git
===============
* Menu:
* Viewing Git Output::
* Git Process Status::
* Running Git Manually::
* Git Executable::
* Global Git Arguments::
File: magit.info, Node: Viewing Git Output, Next: Git Process Status, Up: Running Git
4.5.1 Viewing Git Output
------------------------
Magit runs Git either for side-effects (e.g. when pushing) or to get
some value (e.g. the name of the current branch).
When Git is run for side-effects, the process output is logged in a
per-repository log buffer, which can be consulted using the
‘magit-process’ command when things don’t go as expected.
The output/errors for up to ‘magit-process-log-max’ Git commands are
retained.
‘$’ (‘magit-process’)
This commands displays the process buffer for the current
repository.
Inside that buffer, the usual key bindings for navigating and showing
sections are available. There is one additional command.
‘k’ (‘magit-process-kill’)
This command kills the process represented by the section at point.
-- User Option: magit-git-debug
When this is non-nil then the output of all calls to git are logged
in the process buffer. This is useful when debugging, otherwise it
just negatively affects performance.
File: magit.info, Node: Git Process Status, Next: Running Git Manually, Prev: Viewing Git Output, Up: Running Git
4.5.2 Git Process Status
------------------------
When a Git process is running for side-effects, Magit displays an
indicator in the mode line, using the ‘magit-mode-line-process’ face.
If the Git process exits successfully, the process indicator is
removed from the mode line immediately.
In the case of a Git error, the process indicator is not removed, but
is instead highlighted with the ‘magit-mode-line-process-error’ face,
and the error details from the process buffer are provided as a tooltip
for mouse users. This error indicator persists in the mode line until
the next magit buffer refresh.
If you do not wish process errors to be indicated in the mode line,
customize the ‘magit-process-display-mode-line-error’ user option.
Process errors are additionally indicated at the top of the status
buffer.
File: magit.info, Node: Running Git Manually, Next: Git Executable, Prev: Git Process Status, Up: Running Git
4.5.3 Running Git Manually
--------------------------
While Magit provides many Emacs commands to interact with Git, it does
not cover everything. In those cases your existing Git knowledge will
come in handy. Magit provides some commands for running arbitrary Git
commands by typing them into the minibuffer, instead of having to switch
to a shell.
‘!’ (‘magit-run-popup’)
Shows the popup buffer featuring the below suffix commands.
‘! !’ (‘magit-git-command-topdir’)
This command reads a command from the user and executes it in the
top-level directory of the current working tree.
The string "git " is used as initial input when prompting the user
for the command. It can be removed to run another command.
‘! p’ (‘magit-git-command’)
This command reads a command from the user and executes it in
‘default-directory’. With a prefix argument the command is
executed in the top-level directory of the current working tree
instead.
The string "git " is used as initial input when prompting the user
for the command. It can be removed to run another command.
‘! s’ (‘magit-shell-command-topdir’)
This command reads a command from the user and executes it in the
top-level directory of the current working tree.
‘! S’ (‘magit-shell-command’)
This command reads a command from the user and executes it in
‘default-directory’. With a prefix argument the command is
executed in the top-level directory of the current working tree
instead.
-- User Option: magit-shell-command-verbose-prompt
Whether the prompt, used by the the above commands when reading a
shell command, shows the directory in which it will be run.
These suffix commands start external gui tools.
‘! k’ (‘magit-run-gitk’)
This command runs ‘gitk’ in the current repository.
‘! a’ (‘magit-run-gitk-all’)
This command runs ‘gitk --all’ in the current repository.
‘! b’ (‘magit-run-gitk-branches’)
This command runs ‘gitk --branches’ in the current repository.
‘! g’ (‘magit-run-git-gui’)
This command runs ‘git gui’ in the current repository.
File: magit.info, Node: Git Executable, Next: Global Git Arguments, Prev: Running Git Manually, Up: Running Git
4.5.4 Git Executable
--------------------
Except on MS Windows, Magit defaults to running Git without specifying
the path to the git executable. Instead the first executable found by
Emacs on ‘exec-path’ is used (whose value in turn is set based on the
value of the environment variable ‘$PATH’ when Emacs was started).
This has the advantage that it continues to work even when using
Tramp to connect to a remote machine on which the executable is found in
a different place. The downside is that if you have multiple versions
of Git installed, then you might end up using another version than the
one you think you are using.
‘M-x magit-version’ (‘magit-version’)
This command shows the currently used versions of Magit, Git, and
Emacs in the echo area. Non-interactively this just returns the
Magit version.
When the ‘system-type’ is ‘windows-nt’, then ‘magit-git-executable’
is set to an absolute path when Magit is first loaded. This is
necessary because Git on that platform comes with several wrapper
scripts for the actual git binary, which are also placed on ‘$PATH’, and
using one of these wrappers instead of the binary would degrade
performance horribly.
If Magit doesn’t find the correct executable then you *can* work
around that by setting ‘magit-git-executable’ to an absolute path. But
note that doing so is a kludge. It is better to make sure the order in
the environment variable ‘$PATH’ is correct, and that Emacs is started
with that environment in effect. The command
‘magit-debug-git-executable’ can be useful to find out where Emacs is
searching for git. If you have to connect from Windows to a non-Windows
machine, then you must change the value to "git".
-- User Option: magit-git-executable
The git executable used by Magit, either the full path to the
executable or the string "git" to let Emacs find the executable
itself, using the standard mechanism for doing such things.
‘M-x magit-debug-git-executable’ (‘magit-debug-git-executable’)
Display a buffer with information about ‘magit-git-executable’.
File: magit.info, Node: Global Git Arguments, Prev: Git Executable, Up: Running Git
4.5.5 Global Git Arguments
--------------------------
-- User Option: magit-git-global-arguments
The arguments set here are used every time the git executable is
run as a subprocess. They are placed right after the executable
itself and before the git command - as in ‘git HERE... COMMAND
REST’. For valid arguments see *note (gitman)git::.
Be careful what you add here, especially if you are using Tramp to
connect to servers with ancient Git versions. Never remove
anything that is part of the default value, unless you really know
what you are doing. And think very hard before adding something;
it will be used every time Magit runs Git for any purpose.
File: magit.info, Node: Inspecting, Next: Manipulating, Prev: Interface Concepts, Up: Top
5 Inspecting
************
The functionality provided by Magit can be roughly divided into three
groups: inspecting existing data, manipulating existing data or adding
new data, and transferring data. Of course that is a rather crude
distinction that often falls short, but it’s more useful than no
distinction at all. This section is concerned with inspecting data, the
next two with manipulating and transferring it. Then follows a section
about miscellaneous functionality, which cannot easily be fit into this
distinction.
Of course other distinctions make sense too, e.g. Git’s distinction
between porcelain and plumbing commands, which for the most part is
equivalent to Emacs’ distinction between interactive commands and
non-interactive functions. All of the sections mentioned before are
mainly concerned with the porcelain – Magit’s plumbing layer is
described later.
* Menu:
* Status Buffer::
* Repository List::
* Logging::
* Diffing::
* Ediffing::
* References Buffer::
* Bisecting::
* Visiting Blobs::
* Blaming::
File: magit.info, Node: Status Buffer, Next: Repository List, Up: Inspecting
5.1 Status Buffer
=================
While other Magit buffers contain e.g. one particular diff or one
particular log, the status buffer contains the diffs for staged and
unstaged changes, logs for unpushed and unpulled commits, lists of
stashes and untracked files, and information related to the current
branch.
During certain incomplete operations – for example when a merge
resulted in a conflict – additional information is displayed that helps
proceeding with or aborting the operation.
The command ‘magit-status’ displays the status buffer belonging to
the current repository in another window. This command is used so often
that it should be bound globally. We recommend using ‘C-x g’:
(global-set-key (kbd "C-x g") 'magit-status)
‘C-x g’ (‘magit-status’)
Show the status of the current Git repository in a buffer. With a
prefix argument prompt for a repository to be shown. With two
prefix arguments prompt for an arbitrary directory. If that
directory isn’t the root of an existing repository, then offer to
initialize it as a new repository.
-- User Option: magit-repository-directories
List of directories that are Git repositories or contain Git
repositories.
Each element has the form ‘(DIRECTORY . DEPTH)’. DIRECTORY has to
be a directory or a directory file-name, a string. DEPTH, an
integer, specifies the maximum depth to look for Git repositories.
If it is 0, then only add DIRECTORY itself.
-- User Option: magit-repository-directories-depth
The maximum depth to look for Git repositories. This option is
obsolete and only used for elements of the option
‘magit-repository-directories’ (which see) that don’t specify the
depth directly.
-- Command: ido-enter-magit-status
From an Ido prompt used to open a file, instead drop into
‘magit-status’. This is similar to ‘ido-magic-delete-char’, which,
despite its name, usually causes a Dired buffer to be created.
To make this command available, use something like:
(add-hook 'ido-setup-hook
(lambda ()
(define-key ido-completion-map
(kbd \"C-x g\") 'ido-enter-magit-status)))
Starting with Emacs 25.1 the Ido keymaps are defined just once
instead of every time Ido is invoked, so now you can modify it like
pretty much every other keymap:
(define-key ido-common-completion-map
(kbd \"C-x g\") 'ido-enter-magit-status)
* Menu:
* Status Sections::
* Status Header Sections::
* Status Module Sections::
* Status Options::
File: magit.info, Node: Status Sections, Next: Status Header Sections, Up: Status Buffer
5.1.1 Status Sections
---------------------
The contents of status buffers is controlled using the hook
‘magit-status-sections-hook’. See *note Section Hooks:: to learn about
such hooks and how to customize them.
-- User Option: magit-status-sections-hook
Hook run to insert sections into a status buffer.
The first function on that hook by default is
‘magit-insert-status-headers’; it is described in the next section. By
default the following functions are also members of that hook:
-- Function: magit-insert-merge-log
Insert section for the on-going merge. Display the heads that are
being merged. If no merge is in progress, do nothing.
-- Function: magit-insert-rebase-sequence
Insert section for the on-going rebase sequence. If no such
sequence is in progress, do nothing.
-- Function: magit-insert-am-sequence
Insert section for the on-going patch applying sequence. If no
such sequence is in progress, do nothing.
-- Function: magit-insert-sequencer-sequence
Insert section for the on-going cherry-pick or revert sequence. If
no such sequence is in progress, do nothing.
-- Function: magit-insert-bisect-output
While bisecting, insert section with output from ‘git bisect’.
-- Function: magit-insert-bisect-rest
While bisecting, insert section visualizing the bisect state.
-- Function: magit-insert-bisect-log
While bisecting, insert section logging bisect progress.
-- Function: magit-insert-untracked-files
Maybe insert a list or tree of untracked files.
Do so depending on the value of ‘status.showUntrackedFiles’. Note
that even if the value is ‘all’, Magit still initially only shows
directories. But the directory sections can then be expanded using
‘TAB’.
-- Function: magit-insert-unstaged-changes
Insert section showing unstaged changes.
-- Function: magit-insert-staged-changes
Insert section showing staged changes.
-- Function: magit-insert-stashes &optional ref heading
Insert the ‘stashes’ section showing reflog for "refs/stash". If
optional REF is non-nil show reflog for that instead. If optional
HEADING is non-nil use that as section heading instead of
"Stashes:".
-- Function: magit-insert-unpulled-from-upstream
Insert section showing commits that haven’t been pulled from the
upstream branch yet.
-- Function: magit-insert-unpulled-from-pushremote
Insert section showing commits that haven’t been pulled from the
push-remote branch yet.
-- Function: magit-insert-unpushed-to-upstream
Insert section showing commits that haven’t been pushed to the
upstream yet.
-- Function: magit-insert-unpushed-to-pushremote
Insert section showing commits that haven’t been pushed to the
push-remote yet.
The following functions can also be added to the above hook:
-- Function: magit-insert-tracked-files
Insert a tree of tracked files.
-- Function: magit-insert-ignored-files
Insert a tree of ignored files.
If the first element of ‘magit-diff-section-arguments’ is a
directory, then limit the list to files below that. The value of
that variable can be set using ‘D = f <DIRECTORY> RET g’.
-- Function: magit-insert-unpulled-or-recent-commits
Insert section showing unpulled or recent commits. If an upstream
is configured for the current branch and it is ahead of the current
branch, then show the missing commits. Otherwise, show the last
‘magit-log-section-commit-count’ commits.
-- Function: magit-insert-recent-commits
Insert section showing the last ‘magit-log-section-commit-count’
commits.
-- User Option: magit-log-section-commit-count
How many recent commits ‘magit-insert-recent-commits’ and
‘magit-insert-unpulled-or-recent-commits’ (provided there are no
unpulled commits) show.
-- Function: magit-insert-unpulled-cherries
Insert section showing unpulled commits. Like
‘magit-insert-unpulled-commits’ but prefix each commit that has not
been applied yet (i.e. a commit with a patch-id not shared with
any local commit) with "+", and all others with "-".
-- Function: magit-insert-unpushed-cherries
Insert section showing unpushed commits. Like
‘magit-insert-unpushed-commits’ but prefix each commit which has
not been applied to upstream yet (i.e. a commit with a patch-id
not shared with any upstream commit) with "+" and all others with
"-".
See *note References Buffer:: for some more section inserters, which
could be used here.
File: magit.info, Node: Status Header Sections, Next: Status Module Sections, Prev: Status Sections, Up: Status Buffer
5.1.2 Status Header Sections
----------------------------
The contents of status buffers is controlled using the hook
‘magit-status-sections-hook’ (see *note Status Sections::).
By default ‘magit-insert-status-headers’ is the first member of that
hook variable.
-- Function: magit-insert-status-headers
Insert headers sections appropriate for ‘magit-status-mode’
buffers. The sections are inserted by running the functions on the
hook ‘magit-status-headers-hook’.
-- User Option: magit-status-headers-hook
Hook run to insert headers sections into the status buffer.
This hook is run by ‘magit-insert-status-headers’, which in turn
has to be a member of ‘magit-status-sections-hook’ to be used at
all.
By default the following functions are members of the above hook:
-- Function: magit-insert-error-header
Insert a header line showing the message about the Git error that
just occurred.
This function is only aware of the last error that occur when Git
was run for side-effects. If, for example, an error occurs while
generating a diff, then that error won’t be inserted. Refreshing
the status buffer causes this section to disappear again.
-- Function: magit-insert-diff-filter-header
Insert a header line showing the effective diff filters.
-- Function: magit-insert-head-branch-header
Insert a header line about the current branch or detached ‘HEAD’.
-- Function: magit-insert-upstream-branch-header
Insert a header line about the branch that is usually pulled into
the current branch.
-- Function: magit-insert-push-branch-header
Insert a header line about the branch that the current branch is
usually pushed to.
-- Function: magit-insert-tags-header
Insert a header line about the current and/or next tag, along with
the number of commits between the tag and ‘HEAD’.
The following functions can also be added to the above hook:
-- Function: magit-insert-repo-header
Insert a header line showing the path to the repository top-level.
-- Function: magit-insert-remote-header
Insert a header line about the remote of the current branch.
If no remote is configured for the current branch, then fall back
showing the "origin" remote, or if that does not exist the first
remote in alphabetic order.
-- Function: magit-insert-user-header
Insert a header line about the current user.
File: magit.info, Node: Status Module Sections, Next: Status Options, Prev: Status Header Sections, Up: Status Buffer
5.1.3 Status Module Sections
----------------------------
The contents of status buffers is controlled using the hook
‘magit-status-sections-hook’ (see *note Status Sections::).
By default ‘magit-insert-modules’ is _not_ a member of that hook
variable.
-- Function: magit-insert-modules
Insert submodule sections.
Hook ‘magit-module-sections-hook’ controls which module sections
are inserted, and option ‘magit-module-sections-nested’ controls
whether they are wrapped in an additional section.
-- User Option: magit-module-sections-hook
Hook run by ‘magit-insert-modules’.
-- User Option: magit-module-sections-nested
This option controls whether ‘magit-insert-modules’ wraps inserted
sections in an additional section.
If this is non-nil, then only a single top-level section is
inserted. If it is nil, then all sections listed in
‘magit-module-sections-hook’ become top-level sections.
-- Function: magit-insert-modules-overview
Insert sections for all submodules. For each section insert the
path, the branch, and the output of ‘git describe --tags’, or,
failing that, the abbreviated HEAD commit hash.
Press ‘RET’ on such a submodule section to show its own status
buffer. Press ‘RET’ on the "Modules" section to display a list of
submodules in a separate buffer. This shows additional information
not displayed in the super-repository’s status buffer.
-- Function: magit-insert-modules-unpulled-from-upstream
Insert sections for modules that haven’t been pulled from the
upstream yet. These sections can be expanded to show the
respective commits.
-- Function: magit-insert-modules-unpulled-from-pushremote
Insert sections for modules that haven’t been pulled from the
push-remote yet. These sections can be expanded to show the
respective commits.
-- Function: magit-insert-modules-unpushed-to-upstream
Insert sections for modules that haven’t been pushed to the
upstream yet. These sections can be expanded to show the
respective commits.
-- Function: magit-insert-modules-unpushed-to-pushremote
Insert sections for modules that haven’t been pushed to the
push-remote yet. These sections can be expanded to show the
respective commits.
File: magit.info, Node: Status Options, Prev: Status Module Sections, Up: Status Buffer
5.1.4 Status Options
--------------------
-- User Option: magit-status-refresh-hook
Hook run after a status buffer has been refreshed.
-- User Option: magit-status-margin
This option specifies whether the margin is initially shown in
Magit-Status mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
-- User Option: magit-log-section-args
Additional Git arguments used when creating log sections. Only
‘--graph’, ‘--decorate’, and ‘--show-signature’ are supported.
This option is only a temporary kludge and will be removed.
Note that due to an issue in Git the use of ‘--graph’ is very slow
with long histories, so you probably don’t want to add this here.
Also see the proceeding section for more options concerning status
buffers.
File: magit.info, Node: Repository List, Next: Logging, Prev: Status Buffer, Up: Inspecting
5.2 Repository List
===================
-- Command: magit-list-repositories
This command displays a list of repositories in a separate buffer.
The options ‘magit-repository-directories’ and
‘magit-repository-directories-depth’ control which repositories are
displayed.
-- User Option: magit-repolist-columns
This option controls what columns are displayed by the command
‘magit-list-repositories’ and how they are displayed.
Each element has the form ‘(HEADER WIDTH FORMAT PROPS)’.
HEADER is the string displayed in the header. WIDTH is the width
of the column. FORMAT is a function that is called with one
argument, the repository identification (usually its basename), and
with ‘default-directory’ bound to the toplevel of its working tree.
It has to return a string to be inserted or nil. PROPS is an alist
that supports the keys ‘:right-align’ and ‘:pad-right’.
The following functions can be added to the above option:
-- Function: magit-repolist-column-ident
This function inserts the identification of the repository.
Usually this is just its basename.
-- Function: magit-repolist-column-path
This function inserts the absolute path of the repository.
-- Function: magit-repolist-column-version
This function inserts a description of the repository’s ‘HEAD’
revision.
-- Function: magit-repolist-column-unpulled-from-upstream
This function inserts the number of upstream commits not in the
current branch.
-- Function: magit-repolist-column-unpulled-from-pushremote
This function inserts the number of commits in the push branch but
not the current branch.
-- Function: magit-repolist-column-unpushed-to-upstream
This function inserts the number of commits in the current branch
but not its upstream.
-- Function: magit-repolist-column-unpushed-to-pushremote
This function inserts the number of commits in the current branch
but not its push branch.
File: magit.info, Node: Logging, Next: Diffing, Prev: Repository List, Up: Inspecting
5.3 Logging
===========
The status buffer contains logs for the unpushed and unpulled commits,
but that obviously isn’t enough. The prefix command ‘magit-log-popup’,
on ‘l’, features several suffix commands, which show a specific log in a
separate log buffer.
Like other popups, the log popup also features several arguments that
can be changed before invoking one of the suffix commands. However, in
the case of the log popup, these arguments may be taken from those
currently in use in the current repository’s log buffer, depending on
the value of ‘magit-use-sticky-arguments’ (see *note Popup Buffers and
Prefix Commands::).
For information about the various arguments, see *note
(gitman)git-log::.
The switch ‘++order=VALUE’ is converted to one of
‘--author-date-order’, ‘--date-order’, or ‘--topo-order’ before being
passed to ‘git log’.
The log popup also features several reflog commands. See *note
Reflog::.
‘l’ (‘magit-log-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘l l’ (‘magit-log-current’)
Show log for the current branch. When ‘HEAD’ is detached or with a
prefix argument, show log for one or more revs read from the
minibuffer.
‘l o’ (‘magit-log’)
Show log for one or more revs read from the minibuffer. The user
can input any revision or revisions separated by a space, or even
ranges, but only branches, tags, and a representation of the commit
at point are available as completion candidates.
‘l h’ (‘magit-log-head’)
Show log for ‘HEAD’.
‘l L’ (‘magit-log-branches’)
Show log for all local branches and ‘HEAD’.
‘l b’ (‘magit-log-all-branches’)
Show log for all local and remote branches and ‘HEAD’.
‘l a’ (‘magit-log-all’)
Show log for all references and ‘HEAD’.
Two additional commands that show the log for the file or blob that
is being visited in the current buffer exists, see *note Minor Mode for
Buffers Visiting Files::. The command ‘magit-cherry’ also shows a log,
see *note Cherries::.
* Menu:
* Refreshing Logs::
* Log Buffer::
* Log Margin::
* Select from Log::
* Reflog::
* Cherries::
File: magit.info, Node: Refreshing Logs, Next: Log Buffer, Up: Logging
5.3.1 Refreshing Logs
---------------------
The prefix command ‘magit-log-refresh-popup’, on ‘L’, can be used to
change the log arguments used in the current buffer, without changing
which log is shown. This works in dedicated log buffers, but also in
the status buffer.
‘L’ (‘magit-log-refresh-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘L g’ (‘magit-log-refresh’)
This suffix command sets the local log arguments for the current
buffer.
‘L s’ (‘magit-log-set-default-arguments’)
This suffix command sets the default log arguments for buffers of
the same type as that of the current buffer. Other existing
buffers of the same type are not affected because their local
values have already been initialized.
‘L w’ (‘magit-log-save-default-arguments’)
This suffix command sets the default log arguments for buffers of
the same type as that of the current buffer, and saves the value
for future sessions. Other existing buffers of the same type are
not affected because their local values have already been
initialized.
‘L t’ (‘magit-toggle-margin’)
Show or hide the margin.
File: magit.info, Node: Log Buffer, Next: Log Margin, Prev: Refreshing Logs, Up: Logging
5.3.2 Log Buffer
----------------
‘L’ (‘magit-log-refresh-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer. See *note
Refreshing Logs::.
‘q’ (‘magit-log-bury-buffer’)
Bury the current buffer or the revision buffer in the same frame.
Like ‘magit-mode-bury-buffer’ (which see) but with a negative
prefix argument instead bury the revision buffer, provided it is
displayed in the current frame.
‘C-c C-b’ (‘magit-go-backward’)
Move backward in current buffer’s history.
‘C-c C-f’ (‘magit-go-forward’)
Move forward in current buffer’s history.
‘C-c C-n’ (‘magit-log-move-to-parent’)
Move to a parent of the current commit. By default, this is the
first parent, but a numeric prefix can be used to specify another
parent.
‘SPC’ (‘magit-diff-show-or-scroll-up’)
Update the commit or diff buffer for the thing at point.
Either show the commit or stash at point in the appropriate buffer,
or if that buffer is already being displayed in the current frame
and contains information about that commit or stash, then instead
scroll the buffer up. If there is no commit or stash at point,
then prompt for a commit.
‘DEL’ (‘magit-diff-show-or-scroll-down’)
Update the commit or diff buffer for the thing at point.
Either show the commit or stash at point in the appropriate buffer,
or if that buffer is already being displayed in the current frame
and contains information about that commit or stash, then instead
scroll the buffer down. If there is no commit or stash at point,
then prompt for a commit.
‘=’ (‘magit-log-toggle-commit-limit’)
Toggle the number of commits the current log buffer is limited to.
If the number of commits is currently limited, then remove that
limit. Otherwise set it to 256.
‘+’ (‘magit-log-double-commit-limit’)
Double the number of commits the current log buffer is limited to.
‘-’ (‘magit-log-half-commit-limit’)
Half the number of commits the current log buffer is limited to.
-- User Option: magit-log-auto-more
Insert more log entries automatically when moving past the last
entry. Only considered when moving past the last entry with
‘magit-goto-*-section’ commands.
-- User Option: magit-log-show-refname-after-summary
Whether to show the refnames after the commit summaries. This is
useful if you use really long branch names.
Magit displays references in logs a bit differently from how Git does
it.
Local branches are blue and remote branches are green. Of course
that depends on the used theme, as do the colors used for other types of
references. The current branch has a box around it, as do remote
branches that are their respective remote’s ‘HEAD’ branch.
If a local branch and its push-target point at the same commit, then
their names are combined to preserve space and to make that relationship
visible. For example:
origin/feature
[green][blue-]
instead of
feature origin/feature
[blue-] [green-------]
Also note that while the popup features the ‘--show-signature’
argument, that won’t actually be used when enabled, because Magit
defaults to use just one line per commit. Instead the commit colorized
to indicate the validity of the signed commit object, using the faces
named ‘magit-signature-*’ (which see).
For a description of ‘magit-log-margin’ see *note Log Margin::.
File: magit.info, Node: Log Margin, Next: Select from Log, Prev: Log Buffer, Up: Logging
5.3.3 Log Margin
----------------
In buffers which show one or more logs, it is possible to show
additional information about each commit in the margin. The options
used to configure the margin are named ‘magit-INFIX-margin’, where INFIX
is the same as in the respective major-mode ‘magit-INFIX-mode’. In
regular log buffers that would be ‘magit-log-margin’.
-- User Option: magit-log-margin
This option specifies whether the margin is initially shown in
Magit-Log mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
You can change the STYLE and AUTHOR-WIDTH of all ‘magit-INFIX-margin’
options to the same values by customizing ‘magit-log-margin’ *before*
‘magit’ is loaded. If you do that, then the respective values for the
other options will default to what you have set for that variable.
Likewise if you set INIT in ‘magit-log-margin’ to ‘nil’, then that is
used in the default of all other options. But setting it to ‘t’, i.e.
re-enforcing the default for that option, does not carry to other
options.
‘L’ (‘magit-margin-popup’)
This prefix command features the following commands for changing
the appearance of the margin.
In some buffers that support the margin, "L" is bound to
‘magit-log-refresh-popup’, but that popup features the same commands,
and then some other unrelated commands.
‘L L’ (‘magit-toggle-margin’)
This command shows or hides the margin.
‘L l’ (‘magit-cycle-margin-style’)
This command cycles the style used for the margin.
‘L d’ (‘magit-toggle-margin-details’)
This command shows or hides details in the margin.
File: magit.info, Node: Select from Log, Next: Reflog, Prev: Log Margin, Up: Logging
5.3.4 Select from Log
---------------------
When the user has to select a recent commit that is reachable from
‘HEAD’, using regular completion would be inconvenient (because most
humans cannot remember hashes or "HEAD~5", at least not without double
checking). Instead a log buffer is used to select the commit, which has
the advantage that commits are presented in order and with the commit
message.
Such selection logs are used when selecting the beginning of a rebase
and when selecting the commit to be squashed into.
In addition to the key bindings available in all log buffers, the
following additional key bindings are available in selection log
buffers:
‘C-c C-c’ (‘magit-log-select-pick’)
Select the commit at point and act on it. Call
‘magit-log-select-pick-function’ with the selected commit as
argument.
‘C-c C-k’ (‘magit-log-select-quit’)
Abort selecting a commit, don’t act on any commit.
-- User Option: magit-log-select-margin
This option specifies whether the margin is initially shown in
Magit-Log-Select mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
File: magit.info, Node: Reflog, Next: Cherries, Prev: Select from Log, Up: Logging
5.3.5 Reflog
------------
Also see *note (gitman)git-reflog::.
These reflog commands are available from the log popup. See *note
Logging::.
‘l r’ (‘magit-reflog-current’)
Display the reflog of the current branch.
‘l O’ (‘magit-reflog-other’)
Display the reflog of a branch.
‘l H’ (‘magit-reflog-head’)
Display the ‘HEAD’ reflog.
-- User Option: magit-reflog-margin
This option specifies whether the margin is initially shown in
Magit-Reflog mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
File: magit.info, Node: Cherries, Prev: Reflog, Up: Logging
5.3.6 Cherries
--------------
Cherries are commits that haven’t been applied upstream (yet), and are
usually visualized using a log. Each commit is prefixed with ‘-’ if it
has an equivalent in the upstream and ‘+’ if it does not, i.e. if it is
a cherry.
The command ‘magit-cherry’ shows cherries for a single branch, but
the references buffer (see *note References Buffer::) can show cherries
for multiple "upstreams" at once.
Also see *note (gitman)git-reflog::.
‘Y’ (‘magit-cherry’)
Show commits that are in a certain branch but that have not been
merged in the upstream branch.
-- User Option: magit-cherry-margin
This option specifies whether the margin is initially shown in
Magit-Cherry mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
File: magit.info, Node: Diffing, Next: Ediffing, Prev: Logging, Up: Inspecting
5.4 Diffing
===========
The status buffer contains diffs for the staged and unstaged commits,
but that obviously isn’t enough. The prefix command ‘magit-diff-popup’,
on ‘d’, features several suffix commands, which show a specific diff in
a separate diff buffer.
Like other popups, the diff popup also features several arguments
that can be changed before invoking one of the suffix commands.
However, in the case of the diff popup, these arguments may be taken
from those currently in use in the current repository’s log buffer,
depending on the value of ‘magit-use-sticky-arguments’ (see *note Popup
Buffers and Prefix Commands::).
Also see *note (gitman)git-diff::.
‘d’ (‘magit-diff-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘d d’ (‘magit-diff-dwim’)
Show changes for the thing at point.
‘d r’ (‘magit-diff’)
Show differences between two commits.
RANGE should be a range (A..B or A...B) but can also be a single
commit. If one side of the range is omitted, then it defaults to
‘HEAD’. If just a commit is given, then changes in the working
tree relative to that commit are shown.
If the region is active, use the revisions on the first and last
line of the region. With a prefix argument, instead of diffing the
revisions, choose a revision to view changes along, starting at the
common ancestor of both revisions (i.e., use a "..." range).
‘d w’ (‘magit-diff-working-tree’)
Show changes between the current working tree and the ‘HEAD’
commit. With a prefix argument show changes between the working
tree and a commit read from the minibuffer.
‘d s’ (‘magit-diff-staged’)
Show changes between the index and the ‘HEAD’ commit. With a
prefix argument show changes between the index and a commit read
from the minibuffer.
‘d u’ (‘magit-diff-unstaged’)
Show changes between the working tree and the index.
‘d p’ (‘magit-diff-paths’)
Show changes between any two files on disk.
All of the above suffix commands update the repository’s diff buffer.
The diff popup also features two commands which show differences in
another buffer:
‘d c’ (‘magit-show-commit’)
Show the commit at point. If there is no commit at point or with a
prefix argument, prompt for a commit.
‘d t’ (‘magit-stash-show’)
Show all diffs of a stash in a buffer.
Two additional commands that show the diff for the file or blob that
is being visited in the current buffer exists, see *note Minor Mode for
Buffers Visiting Files::.
* Menu:
* Refreshing Diffs::
* Diff Buffer::
* Diff Options::
* Revision Buffer::
File: magit.info, Node: Refreshing Diffs, Next: Diff Buffer, Up: Diffing
5.4.1 Refreshing Diffs
----------------------
The prefix command ‘magit-diff-refresh-popup’, on ‘D’, can be used to
change the diff arguments used in the current buffer, without changing
which diff is shown. This works in dedicated diff buffers, but also in
the status buffer.
‘D’ (‘magit-diff-refresh-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘D g’ (‘magit-diff-refresh’)
This suffix command sets the local diff arguments for the current
buffer.
‘D s’ (‘magit-diff-set-default-arguments’)
This suffix command sets the default diff arguments for buffers of
the same type as that of the current buffer. Other existing
buffers of the same type are not affected because their local
values have already been initialized.
‘D w’ (‘magit-diff-save-default-arguments’)
This suffix command sets the default diff arguments for buffers of
the same type as that of the current buffer, and saves the value
for future sessions. Other existing buffers of the same type are
not affected because their local values have already been
initialized.
‘D t’ (‘magit-diff-toggle-refine-hunk’)
This command toggles hunk refinement on or off.
‘D r’ (‘magit-diff-switch-range-type’)
This command converts the diff range type from "revA..revB" to
"revB...revA", or vice versa.
‘D f’ (‘magit-diff-flip-revs’)
This command swaps revisions in the diff range from "revA..revB" to
"revB..revA", or vice versa.
‘D F’ (‘magit-diff-toggle-file-filter’)
This command toggles the file restriction of the diffs in the
current buffer, allowing you to quickly switch between viewing all
the changes in the commit and the restricted subset. As a special
case, when this command is called from a log buffer, it toggles the
file restriction in the repository’s revision buffer, which is
useful when you display a revision from a log buffer that is
restricted to a file or files.
In addition to the above popup, which allows changing any of the
supported arguments, there also exist some commands which change a
particular argument.
‘-’ (‘magit-diff-less-context’)
This command decreases the context for diff hunks by COUNT lines.
‘+’ (‘magit-diff-more-context’)
This command increases the context for diff hunks by COUNT lines.
‘0’ (‘magit-diff-default-context’)
This command resets the context for diff hunks to the default
height.
The following commands quickly change what diff is being displayed
without having to using one of the diff popups.
‘C-c C-d’ (‘magit-diff-while-committing’)
While committing, this command shows the changes that are about to
be committed. While amending, invoking the command again toggles
between showing just the new changes or all the changes that will
be committed.
This binding is available in the diff buffer as well as the commit
message buffer.
‘C-c C-b’ (‘magit-go-backward’)
This command moves backward in current buffer’s history.
‘C-c C-f’ (‘magit-go-forward’)
This command moves forward in current buffer’s history.
File: magit.info, Node: Diff Buffer, Next: Diff Options, Prev: Refreshing Diffs, Up: Diffing
5.4.2 Diff Buffer
-----------------
These commands are available in diff buffers.
‘RET’ (‘magit-diff-visit-file’)
From a diff, visit the corresponding file at the appropriate
position.
If the diff shows changes in the worktree, the index, or ‘HEAD’,
then visit the actual file. Otherwise, when the diff is about an
older commit or a range, then visit the appropriate blob.
If point is on a removed line, then visit the blob for the first
parent of the commit which removed that line, i.e. the last commit
where that line still existed. Otherwise visit the blob for the
commit whose changes are being shown.
Interactively, when the file or blob to be displayed is already
being displayed in another window of the same frame, then just
select that window and adjust point. Otherwise, or with a prefix
argument, display the buffer in another window. The meaning of the
prefix argument can be inverted or further modified using the
option ‘magit-display-file-buffer-function’.
Non-interactively the optional OTHER-WINDOW argument is taken
literally. DISPLAY-FN can be used to specify the display function
explicitly, in which case OTHER-WINDOW is ignored.
The optional FORCE-WORKTREE means to force visiting the worktree
version of the file. To do this interactively use the command
‘magit-diff-visit-file-worktree’ instead.
-- User Option: magit-diff-visit-previous-blob
This option controls whether ‘magit-diff-visit-file’ may visit the
previous blob. When this is ‘t’ and point is on a removed line in
a diff for a committed change, then ‘magit-diff-visit-file’ visits
the blob from the last revision which still had that line.
Currently this is only supported for committed changes, for staged
and unstaged changes ‘magit-diff-visit-file’ always visits the file
in the working tree.
‘C-<return>’ (‘magit-diff-visit-file-worktree’)
From a diff, visit the corresponding file at the appropriate
position.
When the file is already being displayed in another window of the
same frame, then just select that window and adjust point. With a
prefix argument also display in another window.
The actual file in the worktree is visited. The positions in the
hunk headers get less useful the "older" the changes are, and as a
result, jumping to the appropriate position gets less reliable.
Also see ‘magit-diff-visit-file’, which visits the respective blob,
unless the diff shows changes in the worktree, the index, or
‘HEAD’.
-- Command: magit-diff-visit-file-other-window
From a diff, visit the corresponding file at the appropriate
position in another window.
‘C-c C-t’ (‘magit-diff-trace-definition’)
From a diff, show log for the definition at point.
‘C-c C-e’ (‘magit-diff-edit-hunk-commit’)
From a hunk, edit the respective commit and visit the file.
First visit the file being modified by the hunk at the correct
location using ‘magit-diff-visit-file’. This actually visits a
blob. When point is on a diff header, not within an individual
hunk, then this visits the blob the first hunk is about.
Then invoke ‘magit-edit-line-commit’, which uses an interactive
rebase to make the commit editable, or if that is not possible
because the commit is not reachable from ‘HEAD’ by checking out
that commit directly. This also causes the actual worktree file to
be visited.
Neither the blob nor the file buffer are killed when finishing the
rebase. If that is undesirable, then it might be better to use
‘magit-rebase-edit-command’ instead of this command.
‘j’ (‘magit-jump-to-diffstat-or-diff’)
Jump to the diffstat or diff. When point is on a file inside the
diffstat section, then jump to the respective diff section.
Otherwise, jump to the diffstat section or a child thereof.
‘SPC’ (‘scroll-up’)
Scroll text upward.
‘DEL’ (‘scroll-down’)
Scroll text downward.
File: magit.info, Node: Diff Options, Next: Revision Buffer, Prev: Diff Buffer, Up: Diffing
5.4.3 Diff Options
------------------
-- User Option: magit-diff-refine-hunk
Whether to show word-granularity differences within diff hunks.
• ‘nil’ never show fine differences.
• ‘t’ show fine differences for the current diff hunk only.
• ‘all’ show fine differences for all displayed diff hunks.
-- User Option: magit-diff-adjust-tab-width
Whether to adjust the width of tabs in diffs.
Determining the correct width can be expensive if it requires
opening large and/or many files, so the widths are cached in the
variable ‘magit-diff--tab-width-cache’. Set that to nil to
invalidate the cache.
• ‘nil’ Never ajust tab width. Use ‘tab-width’s value from the
Magit buffer itself instead.
• ‘t’ If the corresponding file-visiting buffer exits, then use
‘tab-width’’s value from that buffer. Doing this is cheap, so
this value is used even if a corresponding cache entry exists.
• ‘always’ If there is no such buffer, then temporarily visit
the file to determine the value.
• NUMBER Like ‘always’, but don’t visit files larger than NUMBER
bytes.
-- User Option: magit-diff-paint-whitespace
Specify where to highlight whitespace errors.
See ‘magit-diff-highlight-trailing’,
‘magit-diff-highlight-indentation’. The symbol ‘t’ means in all
diffs, ‘status’ means only in the status buffer, and nil means
nowhere.
-- User Option: magit-diff-highlight-trailing
Whether to highlight whitespace at the end of a line in diffs.
Used only when ‘magit-diff-paint-whitespace’ is non-nil.
-- User Option: magit-diff-highlight-indentation
Highlight the "wrong" indentation style. Used only when
‘magit-diff-paint-whitespace’ is non-nil.
The value is a list of cons cells. The car is a regular
expression, and the cdr is the value that applies to repositories
whose directory matches the regular expression. If more than one
element matches, then the *last* element in the list applies. The
default value should therefore come first in the list.
If the value is ‘tabs’, highlight indentation with tabs. If the
value is an integer, highlight indentation with at least that many
spaces. Otherwise, highlight neither.
-- User Option: magit-diff-hide-trailing-cr-characters
Whether to hide ^M characters at the end of a line in diffs.
-- User Option: magit-diff-highlight-hunk-region-functions
This option specifies the functions used to highlight the
hunk-internal region.
‘magit-diff-highlight-hunk-region-dim-outside’ overlays the outside
of the hunk internal selection with a face that causes the added
and removed lines to have the same background color as context
lines. This function should not be removed from the value of this
option.
‘magit-diff-highlight-hunk-region-using-overlays’ and
‘magit-diff-highlight-hunk-region-using-underline’ emphasize the
region by placing delimiting horizontal lines before and after it.
Both of these functions have glitches which cannot be fixed due to
limitations of Emacs’ display engine. For more information see
<https://github.com/magit/magit/issues/2758> ff.
Instead of, or in addition to, using delimiting horizontal lines,
to emphasize the boundaries, you may which to emphasize the text
itself, using ‘magit-diff-highlight-hunk-region-using-face’.
In terminal frames it’s not possible to draw lines as the overlay
and underline variants normally do, so there they fall back to
calling the face function instead.
-- User Option: magit-diff-unmarked-lines-keep-foreground
This option controls whether added and removed lines outside the
hunk-internal region only lose their distinct background color or
also the foreground color. Whether the outside of the region is
dimmed at all depends on
‘magit-diff-highlight-hunk-region-functions’.
File: magit.info, Node: Revision Buffer, Prev: Diff Options, Up: Diffing
5.4.4 Revision Buffer
---------------------
-- User Option: magit-revision-insert-related-refs
Whether to show related refs in revision buffers.
-- User Option: magit-revision-show-gravatar
Whether to show gravatar images in revision buffers.
If non-nil, then the value has to be a cons-cell which specifies
where the gravatar images for the author and/or the committer are
inserted inside the text that was previously inserted according to
‘magit-revision-header-format’.
Both cells are regular expressions. The car specifies where to
insert the author gravatar image. The top half of the image is
inserted right after the matched text, the bottom half on the next
line at the same offset. The cdr specifies where to insert the
committer image, accordingly. Either the car or the cdr may be
nil.
-- User Option: magit-revision-use-hash-sections
Whether to turn hashes inside the commit message into sections.
If non-nil, then hashes inside the commit message are turned into
‘commit’ sections. There is a trade off to be made between
performance and reliability:
• ‘slow’ calls git for every word to be absolutely sure.
• ‘quick’ skips words less than seven characters long.
• ‘quicker’ additionally skips words that don’t contain a
number.
• ‘quickest’ uses all words that are at least seven characters
long and which contain at least one number as well as at least
one letter.
If nil, then no hashes are turned into sections, but you can still
visit the commit at point using "RET".
The diffs shown in the revision buffer may be automatically
restricted to a subset of the changed files. If the revision buffer is
displayed from a log buffer, the revision buffer will share the same
file restriction as that log buffer (also see the command
‘magit-diff-toggle-file-filter’). Note, however, that the log’s file
restriction will be ignored when ‘magit-log-arguments’ includes
‘--follow’. In this case, the ‘-u’ argument of the log popup can be
used to show the file-restricted diffs inline.
If the revision buffer is not displayed from a log buffer, the file
restriction is determined by the file restriction in the repository’s
diff buffer, if it exists, and the value of the option
‘magit-use-sticky-arguments’.
File: magit.info, Node: Ediffing, Next: References Buffer, Prev: Diffing, Up: Inspecting
5.5 Ediffing
============
This section describes how to enter Ediff from Magit buffers. For
information on how to use Ediff itself, see *note (ediff)Top::.
‘e’ (‘magit-ediff-dwim’)
Compare, stage, or resolve using Ediff.
This command tries to guess what file, and what commit or range the
user wants to compare, stage, or resolve using Ediff. It might
only be able to guess either the file, or range/commit, in which
case the user is asked about the other. It might not always guess
right, in which case the appropriate ‘magit-ediff-*’ command has to
be used explicitly. If it cannot read the user’s mind at all, then
it asks the user for a command to run.
‘E’ (‘magit-ediff-popup’)
This prefix command shows the following suffix commands in a popup
buffer.
‘E r’ (‘magit-ediff-compare’)
Compare two revisions of a file using Ediff.
If the region is active, use the revisions on the first and last
line of the region. With a prefix argument, instead of diffing the
revisions, choose a revision to view changes along, starting at the
common ancestor of both revisions (i.e., use a "..." range).
‘E m’ (‘magit-ediff-resolve’)
Resolve outstanding conflicts in a file using Ediff, defaulting to
the file at point.
Provided that the value of ‘merge.conflictstyle’ is ‘diff3’, you
can view the file’s merge-base revision using ‘/’ in the Ediff
control buffer.
In the rare event that you want to manually resolve all conflicts,
including those already resolved by Git, use
‘ediff-merge-revisions-with-ancestor’.
‘E s’ (‘magit-ediff-stage’)
Stage and unstage changes to a file using Ediff, defaulting to the
file at point.
‘E u’ (‘magit-ediff-show-unstaged’)
Show unstaged changes to a file using Ediff.
‘E i’ (‘magit-ediff-show-staged’)
Show staged changes to a file using Ediff.
‘E w’ (‘magit-ediff-show-working-tree’)
Show changes in a file between ‘HEAD’ and working tree using Ediff.
‘E c’ (‘magit-ediff-show-commit’)
Show changes to a file introduced by a commit using Ediff.
‘E z’ (‘magit-ediff-show-stash’)
Show changes to a file introduced by a stash using Ediff.
-- User Option: magit-ediff-dwim-show-on-hunks
This option controls what command ‘magit-ediff-dwim’ calls when
point is on uncommitted hunks. When nil, always run
‘magit-ediff-stage’. Otherwise, use ‘magit-ediff-show-staged’ and
‘magit-ediff-show-unstaged’ to show staged and unstaged changes,
respectively.
-- User Option: magit-ediff-show-stash-with-index
This option controls whether ‘magit-ediff-show-stash’ includes a
buffer containing the file’s state in the index at the time the
stash was created. This makes it possible to tell which changes in
the stash were staged.
-- User Option: magit-ediff-quit-hook
This hook is run after quitting an Ediff session that was created
using a Magit command. The hook functions are run inside the Ediff
control buffer, and should not change the current buffer.
This is similar to ‘ediff-quit-hook’ but takes the needs of Magit
into account. The regular ‘ediff-quit-hook’ is ignored by Ediff
sessions that were created using a Magit command.
File: magit.info, Node: References Buffer, Next: Bisecting, Prev: Ediffing, Up: Inspecting
5.6 References Buffer
=====================
‘y’ (‘magit-show-refs-popup’)
List and compare references in a dedicated buffer. By default all
refs are compared with ‘HEAD’, but with a prefix argument this
command instead acts as a prefix command and shows the following
suffix commands along with the appropriate infix arguments in a
popup buffer.
‘y y’ (‘magit-show-refs-head’)
List and compare references in a dedicated buffer. Refs are
compared with ‘HEAD’.
‘y c’ (‘magit-show-refs-current’)
List and compare references in a dedicated buffer. Refs are
compared with the current branch or ‘HEAD’ if it is detached.
‘y o’ (‘magit-show-refs’)
List and compare references in a dedicated buffer. Refs are
compared with a branch read from the user.
-- User Option: magit-refs-show-commit-count
Whether to show commit counts in Magit-Refs mode buffers.
• ‘all’ Show counts for branches and tags.
• ‘branch’ Show counts for branches only.
• ‘nil’ Never show counts.
The default is ‘nil’ because anything else can be very expensive.
-- User Option: magit-refs-pad-commit-counts
Whether to pad all commit counts on all sides in Magit-Refs mode
buffers.
If this is nil, then some commit counts are displayed right next to
one of the branches that appear next to the count, without any
space in between. This might look bad if the branch name faces
look too similar to ‘magit-dimmed’.
If this is non-nil, then spaces are placed on both sides of all
commit counts.
-- User Option: magit-refs-show-remote-prefix
Whether to show the remote prefix in lists of remote branches.
Showing the prefix is redundant because the name of the remote is
already shown in the heading preceeding the list of its branches.
-- User Option: magit-refs-primary-column-width
Width of the primary column in ‘magit-refs-mode’ buffers. The
primary column is the column that contains the name of the branch
that the current row is about.
If this is an integer, then the column is that many columns wide.
Otherwise it has to be a cons-cell of two integers. The first
specifies the minimal width, the second the maximal width. In that
case the actual width is determined using the length of the names
of the shown local branches. (Remote branches and tags are not
taken into account when calculating to optimal width.)
-- User Option: magit-refs-focus-column-width
Width of the focus column in ‘magit-refs-mode’ buffers.
The focus column is the first column, which marks one branch
(usually the current branch) as the focused branch using ‘*’ or
‘@’. For each other reference, this column optionally shows how
many commits it is ahead of the focused branch and ‘<’, or if it
isn’t ahead then the commits it is behind and ‘>’, or if it isn’t
behind either, then a ‘=’.
This column may also display only ‘*’ or ‘@’ for the focused
branch, in which case this option is ignored. Use ‘L v’ to change
the verbosity of this column.
-- User Option: magit-refs-margin
This option specifies whether the margin is initially shown in
Magit-Refs mode buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
-- User Option: magit-refs-margin-for-tags
This option specifies whether to show information about tags in the
margin. This is disabled by default because it is slow if there
are many tags.
The following variables control how individual refs are displayed.
If you change one of these variables (especially the "%c" part), then
you should also change the others to keep things aligned. The following
%-sequences are supported:
• ‘%a’ Number of commits this ref has over the one we compare to.
• ‘%b’ Number of commits the ref we compare to has over this one.
• ‘%c’ Number of commits this ref has over the one we compare to.
For the ref which all other refs are compared this is instead "@",
if it is the current branch, or "#" otherwise.
• ‘%C’ For the ref which all other refs are compared this is "@", if
it is the current branch, or "#" otherwise. For all other refs "
".
• ‘%h’ Hash of this ref’s tip.
• ‘%m’ Commit summary of the tip of this ref.
• ‘%n’ Name of this ref.
• ‘%u’ Upstream of this local branch.
• ‘%U’ Upstream of this local branch and additional local vs.
upstream information.
-- User Option: magit-refs-filter-alist
This alist controls which tags and branches are omitted from being
displayed in ‘magit-refs-mode’ buffers. If it is ‘nil’, then all
refs are displayed (subject to ‘magit-refs-sections-hook’).
All keys are tried in order until one matches. Then its value is
used and subsequent elements are ignored. If the value is non-nil,
then the reference is displayed, otherwise it is not. If no
element matches, then the reference is displayed.
A key can either be a regular expression that the refname has to
match, or a function that takes the refname as only argument and
returns a boolean. Contrary to how they are displayed in the
buffer, for comparison each tag begins with "tags/" and each remote
branch with "<remote>/".
‘RET’ (‘magit-visit-ref’)
This command visits the reference or revision at point in another
buffer. If there is no revision at point or with a prefix argument
then it prompts for a revision.
This command behaves just like ‘magit-show-commit’ as described
above, except if point is on a reference in a ‘magit-refs-mode’
buffer, in which case the behavior may be different, but only if
you have customized the option ‘magit-visit-ref-behavior’.
-- User Option: magit-visit-ref-behavior
This option controls how ‘magit-visit-ref’ behaves in
‘magit-refs-mode’ buffers.
By default ‘magit-visit-ref’ behaves like ‘magit-show-commit’, in
all buffers, including ‘magit-refs-mode’ buffers. When the type of
the section at point is ‘commit’ then "RET" is bound to
‘magit-show-commit’, and when the type is either ‘branch’ or ‘tag’
then it is bound to ‘magit-visit-ref’.
"RET" is one of Magit’s most essential keys and at least by default
it should behave consistently across all of Magit, especially
because users quickly learn that it does something very harmless;
it shows more information about the thing at point in another
buffer.
However "RET" used to behave differently in ‘magit-refs-mode’
buffers, doing surprising things, some of which cannot really be
described as "visit this thing". If you’ve grown accustomed this
behavior, you can restore it by adding one or more of the below
symbols to the value of this option. But keep in mind that by
doing so you don’t only introduce inconsistencies, you also lose
some functionality and might have to resort to ‘M-x
magit-show-commit’ to get it back.
‘magit-visit-ref’ looks for these symbols in the order in which
they are described here. If the presence of a symbol applies to
the current situation, then the symbols that follow do not affect
the outcome.
• ‘focus-on-ref’
With a prefix argument update the buffer to show commit counts
and lists of cherry commits relative to the reference at point
instead of relative to the current buffer or ‘HEAD’.
Instead of adding this symbol, consider pressing "C-u y o
RET".
• ‘create-branch’
If point is on a remote branch, then create a new local branch
with the same name, use the remote branch as its upstream, and
then check out the local branch.
Instead of adding this symbol, consider pressing "b c RET
RET", like you would do in other buffers.
• ‘checkout-any’
Check out the reference at point. If that reference is a tag
or a remote branch, then this results in a detached ‘HEAD’.
Instead of adding this symbol, consider pressing "b b RET",
like you would do in other buffers.
• ‘checkout-branch’
Check out the local branch at point.
Instead of adding this symbol, consider pressing "b b RET",
like you would do in other buffers.
* Menu:
* References Sections::
File: magit.info, Node: References Sections, Up: References Buffer
5.6.1 References Sections
-------------------------
The contents of references buffers is controlled using the hook
‘magit-refs-sections-hook’. See *note Section Hooks:: to learn about
such hooks and how to customize them. All of the below functions are
members of the default value. Note that it makes much less sense to
customize this hook than it does for the respective hook used for the
status buffer.
-- User Option: magit-refs-sections-hook
Hook run to insert sections into a references buffer.
-- Function: magit-insert-local-branches
Insert sections showing all local branches.
-- Function: magit-insert-remote-branches
Insert sections showing all remote-tracking branches.
-- Function: magit-insert-tags
Insert sections showing all tags.
File: magit.info, Node: Bisecting, Next: Visiting Blobs, Prev: References Buffer, Up: Inspecting
5.7 Bisecting
=============
Also see *note (gitman)git-bisect::.
‘B’ (‘magit-bisect-popup’)
This prefix command shows the following suffix commands in a popup
buffer.
When bisecting is not in progress, then the popup buffer features the
following commands.
‘B B’ (‘magit-bisect-start’)
Start a bisect session.
Bisecting a bug means to find the commit that introduced it. This
command starts such a bisect session by asking for a known good and
a bad commit.
‘B s’ (‘magit-bisect-run’)
Bisect automatically by running commands after each step.
When bisecting is in progress, then the popup buffer features these
commands instead.
‘B b’ (‘magit-bisect-bad’)
Mark the current commit as bad. Use this after you have asserted
that the commit does contain the bug in question.
‘B g’ (‘magit-bisect-good’)
Mark the current commit as good. Use this after you have asserted
that the commit does not contain the bug in question.
‘B k’ (‘magit-bisect-skip’)
Skip the current commit. Use this if for some reason the current
commit is not a good one to test. This command lets Git choose a
different one.
‘B r’ (‘magit-bisect-reset’)
After bisecting, cleanup bisection state and return to original
‘HEAD’.
By default the status buffer shows information about the ongoing
bisect session.
-- User Option: magit-bisect-show-graph
This option controls whether a graph is displayed for the log of
commits that still have to be bisected.
File: magit.info, Node: Visiting Blobs, Next: Blaming, Prev: Bisecting, Up: Inspecting
5.8 Visiting Blobs
==================
‘M-x magit-find-file’ (‘magit-find-file’)
View FILE from REV. Switch to a buffer visiting blob REV:FILE,
creating one if none already exists.
‘M-x magit-find-file-other-window’ (‘magit-find-file-other-window’)
View FILE from REV, in another window. Like ‘magit-find-file’, but
create a new window or reuse an existing one.
File: magit.info, Node: Blaming, Prev: Visiting Blobs, Up: Inspecting
5.9 Blaming
===========
Also see *note (gitman)git-blame::.
To start blaming you can use ‘M-x’ in a file-visiting buffer to
invoke one of the following commands. You can also invoke these
commands using the blame popup, which is available on ‘b’ in
file-visiting buffers that already contain blame information and, also
on ‘b’, in all blob-visiting buffers. You can also enter the blame
popup from the file popup, which is available on ‘C-c M-g’, provided
‘magit-file-mode’ is enabled, see *note Minor Mode for Buffers Visiting
Files::.
-- Command: magit-blame
This command augments each line or chunk of lines in the current
file- or blob-visiting buffer with information about what commits
last touched these lines.
If the buffer visits a revision of that file, then history up to
that revision is considered. Otherwise, the file’s full history is
considered, including uncommitted changes.
If Magit-Blame mode is already turned on in the current buffer then
blaming is done recursively, by visiting REVISION:FILE (using
‘magit-find-file’), where REVISION is a parent of the revision that
added the current line or chunk of lines.
-- Command: magit-blame-echo
This command is like ‘magit-blame’ except that it doesn’t turn on
‘read-only-mode’ and that it initially uses the visualization style
specified by option ‘magit-blame-echo-style’.
-- Command: magit-blame-removal
This command augments each line or chunk of lines in the current
blob-visiting buffer with information about the revision that
removes it. It cannot be used in file-visiting buffers.
Like ‘magit-blame’, this command can be used recursively.
-- Command: magit-blame-reverse
This command augments each line or chunk of lines in the current
file- or blob-visiting buffer with information about the last
revision in which a line still existed.
Like ‘magit-blame’, this command can be used recursively.
The following key bindings are available when Magit-Blame mode is
enabled and Read-Only mode is not enabled. These commands are also
available in other buffers; here only the behavior is described that is
relevant in file-visiting buffers that are being blamed.
‘RET’ (‘magit-show-commit’)
This command shows the commit that last touched the line at point.
‘SPC’ (‘magit-diff-show-or-scroll-up’)
This command updates the commit buffer.
This either shows the commit that last touched the line at point in
the appropriate buffer, or if that buffer is already being
displayed in the current frame and if that buffer contains
information about that commit, then the buffer is scrolled up
instead.
‘DEL’ (‘magit-diff-show-or-scroll-down’)
This command updates the commit buffer.
This either shows the commit that last touched the line at point in
the appropriate buffer, or if that buffer is already being
displayed in the current frame and if that buffer contains
information about that commit, then the buffer is scrolled down
instead.
The following key bindings are available when Magit-Blame mode is
enabled and Read-Only mode is not enabled.
‘b’ (‘magit-blame-popup’)
This prefix command shows the above suffix command along with the
appropriate infix arguments in a popup buffer.
‘n’ (‘magit-blame-next-chunk’)
This command moves to the next chunk.
‘N’ (‘magit-blame-next-chunk-same-commit’)
This command moves to the next chunk from the same commit.
‘p’ (‘magit-blame-previous-chunk’)
This command moves to the previous chunk.
‘P’ (‘magit-blame-previous-chunk-same-commit’)
This command moves to the previous chunk from the same commit.
‘q’ (‘magit-blame-quit’)
This command turns off Magit-Blame mode. If the buffer was created
during a recursive blame, then it also kills the buffer.
‘M-w’ (‘magit-blame-copy-hash’)
This command saves the hash of the current chunk’s commit to the
kill ring.
When the region is active, the command saves the region’s content
instead of the hash, like ‘kill-ring-save’ would.
‘c’ (‘magit-blame-cycle-style’)
This command changes how blame information is visualized in the
current buffer by cycling through the styles specified using the
option ‘magit-blame-styles’.
Blaming is also controlled using the following options.
-- User Option: magit-blame-styles
This option defines a list of styles used to visualize blame
information. For now see its doc-string to learn more.
-- User Option: magit-blame-echo-style
This option specifies the blame visualization style used by the
command ‘magit-blame-echo’. This must be a symbol that is used as
the identifier for one of the styles defined in
‘magit-blame-styles’.
-- User Option: magit-blame-time-format
This option specifies the format string used to display times when
showing blame information.
-- User Option: magit-blame-read-only
This option controls whether blaming a buffer also makes
temporarily read-only.
-- User Option: magit-blame-disable-modes
This option lists incompatible minor-modes that should be disabled
temporarily when a buffer contains blame information. They are
enabled again when the buffer no longer shows blame information.
-- User Option: magit-blame-goto-chunk-hook
This hook is run when moving between chunks.
File: magit.info, Node: Manipulating, Next: Transferring, Prev: Inspecting, Up: Top
6 Manipulating
**************
* Menu:
* Repository Setup::
* Staging and Unstaging::
* Applying::
* Committing::
* Branching::
* Merging::
* Resolving Conflicts::
* Rebasing::
* Cherry Picking::
* Resetting::
* Stashing::
File: magit.info, Node: Repository Setup, Next: Staging and Unstaging, Up: Manipulating
6.1 Repository Setup
====================
‘M-x magit-init’ (‘magit-init’)
This command initializes a repository and then shows the status
buffer for the new repository.
If the directory is below an existing repository, then the user has
to confirm that a new one should be created inside. If the
directory is the root of the existing repository, then the user has
to confirm that it should be reinitialized.
‘M-x magit-clone’ (‘magit-clone’)
This command clones a repository and then shows the status buffer
for the new repository.
The user is queried for a remote url and a local directory.
-- User Option: magit-clone-set-remote.pushDefault
Whether to set the value of ‘remote.pushDefault’ after cloning.
If ‘t’, then set without asking. If ‘nil’, then don’t set. If
‘ask’, then ask the user every time she clones a repository.
File: magit.info, Node: Staging and Unstaging, Next: Applying, Prev: Repository Setup, Up: Manipulating
6.2 Staging and Unstaging
=========================
Like Git, Magit can of course stage and unstage complete files. Unlike
Git, it also allows users to gracefully un-/stage individual hunks and
even just part of a hunk. To stage individual hunks and parts of hunks
using Git directly, one has to use the very modal and rather clumsy
interface of a ‘git add --interactive’ session.
With Magit, on the other hand, one can un-/stage individual hunks by
just moving point into the respective section inside a diff displayed in
the status buffer or a separate diff buffer and typing ‘s’ or ‘u’. To
operate on just parts of a hunk, mark the changes that should be
un-/staged using the region and then press the same key that would be
used to un-/stage. To stage multiple files or hunks at once use a
region that starts inside the heading of such a section and ends inside
the heading of a sibling section of the same type.
Besides staging and unstaging, Magit also provides several other
"apply variants" that can also operate on a file, multiple files at
once, a hunk, multiple hunks at once, and on parts of a hunk. These
apply variants are described in the next section.
You can also use Ediff to stage and unstage. See *note Ediffing::.
‘s’ (‘magit-stage’)
Add the change at point to the staging area.
With a prefix argument and an untracked file (or files) at point,
stage the file but not its content. This makes it possible to
stage only a subset of the new file’s changes.
‘S’ (‘magit-stage-modified’)
Stage all changes to files modified in the worktree. Stage all new
content of tracked files and remove tracked files that no longer
exist in the working tree from the index also. With a prefix
argument also stage previously untracked (but not ignored) files.
‘u’ (‘magit-unstage’)
Remove the change at point from the staging area.
Only staged changes can be unstaged. But by default this command
performs an action that is somewhat similar to unstaging, when it
is called on a committed change: it reverses the change in the
index but not in the working tree.
‘U’ (‘magit-unstage-all’)
Remove all changes from the staging area.
-- User Option: magit-unstage-committed
This option controls whether ‘magit-unstage’ "unstages" committed
changes by reversing them in the index but not the working tree.
The alternative is to raise an error.
‘M-x magit-reverse-in-index’ (‘magit-reverse-in-index’)
This command reverses the committed change at point in the index
but not the working tree. By default no key is bound directly to
this command, but it is indirectly called when ‘u’
(‘magit-unstage’) is pressed on a committed change.
This allows extracting a change from ‘HEAD’, while leaving it in
the working tree, so that it can later be committed using a
separate commit. A typical workflow would be:
• Optionally make sure that there are no uncommitted changes.
• Visit the ‘HEAD’ commit and navigate to the change that should
not have been included in that commit.
• Type ‘u’ (‘magit-unstage’) to reverse it in the index. This
assumes that ‘magit-unstage-committed-changes’ is non-nil.
• Type ‘c e’ to extend ‘HEAD’ with the staged changes, including
those that were already staged before.
• Optionally stage the remaining changes using ‘s’ or ‘S’ and
then type ‘c c’ to create a new commit.
‘M-x magit-reset-index’ (‘magit-reset-index’)
Reset the index to some commit. The commit is read from the user
and defaults to the commit at point. If there is no commit at
point, then it defaults to ‘HEAD’.
* Menu:
* Staging from File-Visiting Buffers::
File: magit.info, Node: Staging from File-Visiting Buffers, Up: Staging and Unstaging
6.2.1 Staging from File-Visiting Buffers
----------------------------------------
Fine-grained un-/staging has to be done from the status or a diff
buffer, but it’s also possible to un-/stage all changes made to the file
visited in the current buffer right from inside that buffer.
‘M-x magit-stage-file’ (‘magit-stage-file’)
When invoked inside a file-visiting buffer, then stage all changes
to that file. In a Magit buffer, stage the file at point if any.
Otherwise prompt for a file to be staged. With a prefix argument
always prompt the user for a file, even in a file-visiting buffer
or when there is a file section at point.
‘M-x magit-unstage-file’ (‘magit-unstage-file’)
When invoked inside a file-visiting buffer, then unstage all
changes to that file. In a Magit buffer, unstage the file at point
if any. Otherwise prompt for a file to be unstaged. With a prefix
argument always prompt the user for a file, even in a file-visiting
buffer or when there is a file section at point.
File: magit.info, Node: Applying, Next: Committing, Prev: Staging and Unstaging, Up: Manipulating
6.3 Applying
============
Magit provides several "apply variants": stage, unstage, discard,
reverse, and "regular apply". At least when operating on a hunk they
are all implemented using ‘git apply’, which is why they are called
"apply variants".
• Stage. Apply a change from the working tree to the index. The
change also remains in the working tree.
• Unstage. Remove a change from the index. The change remains in
the working tree.
• Discard. On a staged change, remove it from the working tree and
the index. On an unstaged change, remove it from the working tree
only.
• Reverse. Reverse a change in the working tree. Both committed and
staged changes can be reversed. Unstaged changes cannot be
reversed. Discard them instead.
• Apply. Apply a change to the working tree. Both committed and
staged changes can be applied. Unstaged changes cannot be applied
- as they already have been applied.
The previous section described the staging and unstaging commands.
What follows are the commands which implement the remaining apply
variants.
‘a’ (‘magit-apply’)
Apply the change at point to the working tree.
With a prefix argument fallback to a 3-way merge. Doing so causes
the change to be applied to the index as well.
‘k’ (‘magit-discard’)
Remove the change at point from the working tree.
‘v’ (‘magit-reverse’)
Reverse the change at point in the working tree.
With a prefix argument fallback to a 3-way merge. Doing so causes
the change to be applied to the index as well.
With a prefix argument all apply variants attempt a 3-way merge when
appropriate (i.e. when ‘git apply’ is used internally).
File: magit.info, Node: Committing, Next: Branching, Prev: Applying, Up: Manipulating
6.4 Committing
==============
When the user initiates a commit, Magit calls ‘git commit’ without any
arguments, so Git has to get it from the user. It creates the file
‘.git/COMMIT_EDITMSG’ and then opens that file in an editor. Magit
arranges for that editor to be the Emacsclient. Once the user finishes
the editing session, the Emacsclient exits and Git creates the commit
using the file’s content as message.
* Menu:
* Initiating a Commit::
* Editing Commit Messages::
File: magit.info, Node: Initiating a Commit, Next: Editing Commit Messages, Up: Committing
6.4.1 Initiating a Commit
-------------------------
Also see *note (gitman)git-commit::.
‘c’ (‘magit-commit-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘c c’ (‘magit-commit’)
Create a new commit on ‘HEAD’. With a prefix argument amend to the
commit at ‘HEAD’ instead.
‘c a’ (‘magit-commit-amend’)
Amend the last commit.
‘c e’ (‘magit-commit-extend’)
Amend the last commit, without editing the message. With a prefix
argument keep the committer date, otherwise change it. The option
‘magit-commit-extend-override-date’ can be used to inverse the
meaning of the prefix argument.
Non-interactively respect the optional OVERRIDE-DATE argument and
ignore the option.
‘c w’ (‘magit-commit-reword’)
Reword the last commit, ignoring staged changes. With a prefix
argument keep the committer date, otherwise change it. The option
‘magit-commit-reword-override-date’ can be used to inverse the
meaning of the prefix argument.
Non-interactively respect the optional OVERRIDE-DATE argument and
ignore the option.
‘c f’ (‘magit-commit-fixup’)
Create a fixup commit.
With a prefix argument the target commit has to be confirmed.
Otherwise the commit at point may be used without confirmation
depending on the value of option ‘magit-commit-squash-confirm’.
‘c F’ (‘magit-commit-instant-fixup’)
Create a fixup commit and instantly rebase.
‘c s’ (‘magit-commit-squash’)
Create a squash commit, without editing the squash message.
With a prefix argument the target commit has to be confirmed.
Otherwise the commit at point may be used without confirmation
depending on the value of option ‘magit-commit-squash-confirm’.
‘c S’ (‘magit-commit-instant-squash’)
Create a squash commit and instantly rebase.
‘c A’ (‘magit-commit-augment’)
Create a squash commit, editing the squash message.
With a prefix argument the target commit has to be confirmed.
Otherwise the commit at point may be used without confirmation
depending on the value of option ‘magit-commit-squash-confirm’.
-- User Option: magit-commit-ask-to-stage
Whether to ask to stage all unstaged changes when committing and
nothing is staged.
-- User Option: magit-commit-extend-override-date
Whether using ‘magit-commit-extend’ changes the committer date.
-- User Option: magit-commit-reword-override-date
Whether using ‘magit-commit-reword’ changes the committer date.
-- User Option: magit-commit-squash-confirm
Whether the commit targeted by squash and fixup has to be
confirmed. When non-nil then the commit at point (if any) is used
as default choice. Otherwise it has to be confirmed. This option
only affects ‘magit-commit-squash’ and ‘magit-commit-fixup’. The
"instant" variants always require confirmation because making an
error while using those is harder to recover from.
File: magit.info, Node: Editing Commit Messages, Prev: Initiating a Commit, Up: Committing
6.4.2 Editing Commit Messages
-----------------------------
After initiating a commit as described in the previous section, two new
buffers appear. One shows the changes that are about to committed,
while the other is used to write the message. All regular editing
commands are available in the commit message buffer. This section only
describes the additional commands.
Commit messages are edited in an edit session - in the background Git
is waiting for the editor, in our case the Emacsclient, to save the
commit message in a file (in most cases ‘.git/COMMIT_EDITMSG’) and then
return. If the Emacsclient returns with a non-zero exit status then Git
does not create the commit. So the most important commands are those
for finishing and aborting the commit.
‘C-c C-c’ (‘with-editor-finish’)
Finish the current editing session by returning with exit code 0.
Git then creates the commit using the message it finds in the file.
‘C-c C-k’ (‘with-editor-cancel’)
Cancel the current editing session by returning with exit code 1.
Git then cancels the commit, but leaves the file untouched.
In addition to being used by Git, these messages may also be stored
in a ring that persists until Emacs is closed. By default the message
is stored at the beginning and the end of an edit session (regardless of
whether the session is finished successfully or was canceled). It is
sometimes useful to bring back messages from that ring.
‘C-c M-s’ (‘git-commit-save-message’)
Save the current buffer content to the commit message ring.
‘M-p’ (‘git-commit-prev-message’)
Cycle backward through the commit message ring, after saving the
current message to the ring. With a numeric prefix ARG, go back
ARG comments.
‘M-n’ (‘git-commit-next-message’)
Cycle forward through the commit message ring, after saving the
current message to the ring. With a numeric prefix ARG, go back
ARG comments.
By default the diff for the changes that are about to be committed
are automatically shown when invoking the commit. When amending to an
existing commit it may be useful to show either the changes that are
about to be added to that commit or to show those changes together with
those that are already committed.
‘C-c C-d’ (‘magit-diff-while-committing’)
While committing, show the changes that are about to be committed.
While amending, invoking the command again toggles between showing
just the new changes or all the changes that will be committed.
‘C-c C-w’ (‘magit-pop-revision-stack’)
This command inserts a representation of a revision into the
current buffer. It can be used inside buffers used to write commit
messages but also in other buffers such as buffers used to edit
emails or ChangeLog files.
By default this command pops the revision which was last added to
the ‘magit-revision-stack’ and inserts it into the current buffer
according to ‘magit-pop-revision-stack-format’. Revisions can be
put on the stack using ‘magit-copy-section-value’ and
‘magit-copy-buffer-revision’.
If the stack is empty or with a prefix argument it instead reads a
revision in the minibuffer. By using the minibuffer history this
allows selecting an item which was popped earlier or to insert an
arbitrary reference or revision without first pushing it onto the
stack.
When reading the revision from the minibuffer, then it might not be
possible to guess the correct repository. When this command is
called inside a repository (e.g. while composing a commit
message), then that repository is used. Otherwise (e.g. while
composing an email) then the repository recorded for the top
element of the stack is used (even though we insert another
revision). If not called inside a repository and with an empty
stack, or with two prefix arguments, then read the repository in
the minibuffer too.
-- User Option: magit-pop-revision-stack-format
This option controls how the command ‘magit-pop-revision-stack’
inserts a revision into the current buffer.
The entries on the stack have the format ‘(HASH TOPLEVEL)’ and this
option has the format ‘(POINT-FORMAT EOB-FORMAT INDEX-REGEXP)’, all
of which may be nil or a string (though either one of EOB-FORMAT or
POINT-FORMAT should be a string, and if INDEX-REGEXP is non-nil,
then the two formats should be too).
First INDEX-REGEXP is used to find the previously inserted entry,
by searching backward from point. The first submatch must match
the index number. That number is incremented by one, and becomes
the index number of the entry to be inserted. If you don’t want to
number the inserted revisions, then use nil for INDEX-REGEXP.
If INDEX-REGEXP is non-nil then both POINT-FORMAT and EOB-FORMAT
should contain \"%N\", which is replaced with the number that was
determined in the previous step.
Both formats, if non-nil and after removing %N, are then expanded
using ‘git show –format=FORMAT ...’ inside TOPLEVEL.
The expansion of POINT-FORMAT is inserted at point, and the
expansion of EOB-FORMAT is inserted at the end of the buffer (if
the buffer ends with a comment, then it is inserted right before
that).
Some projects use pseudo headers in commit messages. Magit colorizes
such headers and provides some commands to insert such headers.
-- User Option: git-commit-known-pseudo-headers
A list of Git pseudo headers to be highlighted.
‘C-c C-a’ (‘git-commit-ack’)
Insert a header acknowledging that you have looked at the commit.
‘C-c C-r’ (‘git-commit-review’)
Insert a header acknowledging that you have reviewed the commit.
‘C-c C-s’ (‘git-commit-signoff’)
Insert a header to sign off the commit.
‘C-c C-t’ (‘git-commit-test’)
Insert a header acknowledging that you have tested the commit.
‘C-c C-o’ (‘git-commit-cc’)
Insert a header mentioning someone who might be interested.
‘C-c C-p’ (‘git-commit-reported’)
Insert a header mentioning the person who reported the issue being
fixed by the commit.
‘C-c C-i’ (‘git-commit-suggested’)
Insert a header mentioning the person who suggested the change.
‘git-commit-mode’ is a minor mode that is only used to establish the
above key bindings. This allows using an arbitrary major mode when
editing the commit message. It’s even possible to use a different major
mode in different repositories, which is useful when different projects
impose different commit message conventions.
-- User Option: git-commit-major-mode
The value of this option is the major mode used to edit Git commit
messages.
Because ‘git-commit-mode’ is a minor mode, we don’t use its mode hook
to setup the buffer, except for the key bindings. All other setup
happens in the function ‘git-commit-setup’, which among other things
runs the hook ‘git-commit-setup-hook’. The following functions are
suitable for that hook.
-- User Option: git-commit-setup-hook
Hook run at the end of ‘git-commit-setup’.
-- Function: magit-revert-buffers &optional force
Revert unmodified file-visiting buffers of the current repository.
If either ‘magit-revert-buffers’ is non-nil and
‘inhibit-magit-revert’ is nil, or if optional FORCE is non-nil,
then revert all unmodified buffers that visit files being tracked
in the current repository.
-- Function: git-commit-save-message
Save the current buffer content to the commit message ring.
-- Function: git-commit-setup-changelog-support
After this function is called, ChangeLog entries are treated as
paragraphs.
-- Function: git-commit-turn-on-auto-fill
Turn on ‘auto-fill-mode’ and set ‘fill-column’ to the value of
‘git-commit-fill-column’.
-- Function: git-commit-turn-on-flyspell
Turn on Flyspell mode. Also prevent comments from being checked
and finally check current non-comment text.
-- Function: git-commit-propertize-diff
Propertize the diff shown inside the commit message buffer. Git
inserts such diffs into the commit message template when the
‘--verbose’ argument is used. Magit’s commit popup by default does
not offer that argument because the diff that is shown in a
separate buffer is more useful. But some users disagree, which is
why this function exists.
-- Function: with-editor-usage-message
Show usage information in the echo area.
Magit also helps with writing *good* commit messages by complaining
when certain rules are violated.
-- User Option: git-commit-summary-max-length
The intended maximal length of the summary line of commit messages.
Characters beyond this column are colorized to indicate that this
preference has been violated.
-- User Option: git-commit-fill-column
Column beyond which automatic line-wrapping should happen in commit
message buffers.
-- User Option: git-commit-finish-query-functions
List of functions called to query before performing commit.
The commit message buffer is current while the functions are
called. If any of them returns nil, then the commit is not
performed and the buffer is not killed. The user should then fix
the issue and try again.
The functions are called with one argument. If it is non-nil then
that indicates that the user used a prefix argument to force
finishing the session despite issues. Functions should usually
honor this wish and return non-nil.
-- Function: git-commit-check-style-conventions
Check for violations of certain basic style conventions. For each
violation ask the user if she wants to proceed anyway. This makes
sure the summary line isn’t too long and that the second line is
empty.
To show no diff while committing remove ‘magit-commit-diff’ from
‘server-switch-hook’.
File: magit.info, Node: Branching, Next: Merging, Prev: Committing, Up: Manipulating
6.5 Branching
=============
* Menu:
* The Two Remotes::
* The Branch Popup::
* The Branch Config Popup::
* Auxillary Branch Commands::
File: magit.info, Node: The Two Remotes, Next: The Branch Popup, Up: Branching
6.5.1 The Two Remotes
---------------------
The upstream branch of some local branch is the branch into which the
commits on that local branch should eventually be merged, usually
something like ‘origin/master’. For the ‘master’ branch itself the
upstream branch and the branch it is being pushed to, are usually the
same remote branch. But for a feature branch the upstream branch and
the branch it is being pushed to should differ.
The commits on feature branches too should _eventually_ end up in a
remote branch such as ‘origin/master’ or ‘origin/maint’. Such a branch
should therefore be used as the upstream. But feature branches
shouldn’t be pushed directly to such branches. Instead a feature branch
‘my-feature’ is usually pushed to ‘my-fork/my-feature’ or if you are a
contributor ‘origin/my-feature’. After the new feature has been
reviewed, the maintainer merges the feature into ‘master’. And finally
‘master’ (not ‘my-feature’ itself) is pushed to ‘origin/master’.
But new features seldom are perfect on the first try, and so feature
branches usually have to be reviewed, improved, and re-pushed several
times. Pushing should therefore be easy to do, and for that reason many
Git users have concluded that it is best to use the remote branch to
which the local feature branch is being pushed as its upstream.
But luckily Git has long ago gained support for a push-remote which
can be configured separately from the upstream branch, using the
variables ‘branch.<name>.pushRemote’ and ‘remote.pushDefault’. So we no
longer have to choose which of the two remotes should be used as "the
remote".
Each of the fetching, pulling, and pushing popups features three
commands that act on the current branch and some other branch. Of
these, ‘p’ is bound to a command which acts on the push-remote, ‘u’ is
bound to a command which acts on the upstream, and ‘e’ is bound to a
command which acts on any other branch. The status buffer shows
unpushed and unpulled commits for both the push-remote and the upstream.
It’s fairly simple to configure these two remotes. The values of all
the variables that are related to fetching, pulling, and pushing (as
well as some other branch-related variables) can be inspected and
changed using the popup ‘magit-branch-config-popup’, which is a
sub-popup of many popups that deal with branches. It is also possible
to set the push-remote or upstream while pushing (see *note Pushing::).
File: magit.info, Node: The Branch Popup, Next: The Branch Config Popup, Prev: The Two Remotes, Up: Branching
6.5.2 The Branch Popup
----------------------
The popup ‘magit-branch-popup’ is used to create and checkout branches,
and to make changes to existing branches. It is not used to fetch,
pull, merge, rebase, or push branches, i.e. this popup deals with
branches themselves, not with the commits reachable from them. Those
features are available from separate popups.
‘b’ (‘magit-branch-popup’)
This prefix command shows the following suffix commands in a popup
buffer.
By default it also displays the values of some branch-related Git
variables and allows changing their values, just like the
specialized ‘magit-branch-config-popup’ does.
-- User Option: magit-branch-popup-show-variables
Whether the ‘magit-branch-popup’ shows Git variables. This
defaults to t to avoid changing key bindings. When set to nil, no
variables are displayed directly in this popup, and the sub-popup
‘magit-branch-config-popup’ has to be used instead to view and
change branch related variables.
‘b C’ (‘magit-branch-config-popup’)
This command shows branch related variables in a separate popup.
By default this asks the user for which branch the variables should
be shown. When ‘magit-branch-popup-show-variables’ is ‘nil’, then
it shows the variables for the current branch, unless a prefix
argument is used.
‘b b’ (‘magit-checkout’)
Checkout a revision read in the minibuffer and defaulting to the
branch or arbitrary revision at point. If the revision is a local
branch then that becomes the current branch. If it is something
else then ‘HEAD’ becomes detached. Checkout fails if the working
tree or the staging area contain changes.
‘b n’ (‘magit-branch’)
Create a new branch. The user is asked for a branch or arbitrary
revision to use as the starting point of the new branch. When a
branch name is provided, then that becomes the upstream branch of
the new branch. The name of the new branch is also read in the
minibuffer.
Also see option ‘magit-branch-prefer-remote-upstream’.
‘b c’ (‘magit-branch-and-checkout’)
This command creates a new branch like ‘magit-branch’, but then
also checks it out.
Also see option ‘magit-branch-prefer-remote-upstream’.
‘b l’ (‘magit-branch-checkout’)
This command checks out an existing or new local branch. It reads
a branch name from the user offering all local branches and a
subset of remote branches as candidates. Remote branches for which
a local branch by the same name exists are omitted from the list of
candidates. The user can also enter a completely new branch name.
• If the user selects an existing local branch, then that is
checked out.
• If the user selects a remote branch, then it creates and
checks out a new local branch with the same name, and
configures the selected remote branch as the push target.
• If the user enters a new branch name, then it creates and
checks that out, after also reading the starting-point from
the user.
In the latter two cases the upstream is also set. Whether it is
set to the chosen starting point or something else depends on the
value of ‘magit-branch-adjust-remote-upstream-alist’.
‘b s’ (‘magit-branch-spinoff’)
This command creates and checks out a new branch starting at and
tracking the current branch. That branch in turn is reset to the
last commit it shares with its upstream. If the current branch has
no upstream or no unpushed commits, then the new branch is created
anyway and the previously current branch is not touched.
This is useful to create a feature branch after work has already
began on the old branch (likely but not necessarily "master").
If the current branch is a member of the value of option
‘magit-branch-prefer-remote-upstream’ (which see), then the current
branch will be used as the starting point as usual, but the
upstream of the starting-point may be used as the upstream of the
new branch, instead of the starting-point itself.
If optional FROM is non-nil, then the source branch is reset to
‘FROM~’, instead of to the last commit it shares with its upstream.
Interactively, FROM is only ever non-nil, if the region selects
some commits, and among those commits, FROM is the commit that is
the fewest commits ahead of the source branch.
The commit at the other end of the selection actually does not
matter, all commits between FROM and ‘HEAD’ are moved to the new
branch. If FROM is not reachable from ‘HEAD’ or is reachable from
the source branch’s upstream, then an error is raised.
‘b Y’ (‘magit-branch-pull-request’)
This command creates and configures a new branch from a Github
pull-request, creating and configuring a new remote if necessary.
The name of the local branch is the same as the name of the remote
branch that you are being asked to merge, unless the contributor
could not be bother to properly name the branch before opening the
pull-request. The most likely such case is when you are being
asked to merge something like "fork/master" into "origin/master".
In such cases the local branch will be named "pr-N", where ‘N’ is
the pull-request number.
These variables are always set by this command:
• ‘branch.<name>.pullRequest’ is set to the pull-request number.
• ‘branch.<name>.pullRequestRemote’ is set to the remote on
which the pull-request branch is located.
• ‘branch.<name>.pushRemote’ is set to the same remote as
‘branch.<name>.pullRequestRemote’ if that is possible,
otherwise it is set to the upstream remote.
• ‘branch.<name>.description’ is set to the pull-request title.
• ‘branch.<name>.rebase’ is set to ‘true’ because there should
be no merge commits among the commits in a pull-request.
This command also configures the upstream and the push-remote of
the local branch that it creates.
The branch against which the pull-request was opened, is always
used as the upstream. This makes it easy to see what commits you
are being asked to merge in the section titled something like
"Unmerged into origin/master".
Like for other commands that create a branch it depends on the
option ‘magit-branch-prefer-remote-upstream’ whether the remote
branch itself or the respective local branch is used as the
upstream, so this section may also be titled e.g. "Unmerged into
master".
When necessary and possible, then the remote pull-request branch is
configured to be used as the push-target. This makes it easy to
see what further changes the contributor has made since you last
reviewed their changes in the section titled something like
"Unpulled from origin/new-feature" or "Unpulled from
fork/new-feature".
• If the pull-request branch is located in the upstream
repository, then you probably have set ‘remote.pushDefault’ to
that repository. However some users like to set that variable
to their personal fork, even if they have push access to the
upstream, so ‘branch.<name>.pushRemote’ is set anyway.
• If the pull-request branch is located inside a fork, then you
are usually able to push to that branch, because Github by
default allows the recipient of a pull-request to push to the
remote pull-request branch even if it is located in a fork.
The contributor has to explicitly disable this.
• If you are not allowed to push to the pull-request branch
on the fork, then a branch by the same name located in
the upstream repository is configured as the push-target.
• A — sadly rather common — special case is when the
contributor didn’t bother to use a dedicated branch for
the pull-request.
The most likely such case is when you are being asked to
merge something like "fork/master" into "origin/master".
The special push permission mentioned above is never
granted for the branch that is the repository’s default
branch, and that would almost certainly be the case in
this scenario.
To enable you to easily push somewhere anyway, the local
branch is named "pr-N" (where ‘N’ is the pull-request
number) and the upstream repository is used as the
push-remote.
• Finally, if you are allowed to push to the pull-request
branch and the contributor had the foresight to use a
dedicated branch, then the fork is configured as the
push-remote.
The push-remote is configured using
‘branch.<name>.pushRemote’, even if the used value is
identical to that of ‘remote.pushDefault’, just in case you
change the value of the latter later on. Additionally the
variable ‘branch.<name>.pullRequestRemote’ is set to the
remote on which the pull-request branch is located.
When you later delete the local pull-request branch, then you are
offered to also delete the corresponding remote, provided it is not
the upstream remote and that the tracking branch that corresponds
to the deleted branch is the only remaining tracked branch. If you
don’t confirm, then only the tracking branch itself is deleted in
addition to the local branch.
Do not delete the tracking branch instead of the local branch. The
cleanup mentioned in the previous paragraph is not performed if you
do that.
‘b y’ (‘magit-checkout-pull-request’)
This command creates and configures a new branch from a pull
request, the same way ‘magit-branch-pull-request’ does.
Additionally it checks out the new branch.
‘b x’ (‘magit-branch-reset’)
This command resets a branch, defaulting to the branch at point, to
the tip of another branch or any other commit.
When the branch being reset is the current branch, then a hard
reset is performed. If there are any uncommitted changes, then the
user has to confirm the reset because those changes would be lost.
This is useful when you have started work on a feature branch but
realize it’s all crap and want to start over.
When resetting to another branch and a prefix argument is used,
then the target branch is set as the upstream of the branch that is
being reset.
‘b k’ (‘magit-branch-delete’)
Delete one or multiple branches. If the region marks multiple
branches, then offer to delete those. Otherwise, prompt for a
single branch to be deleted, defaulting to the branch at point.
‘b r’ (‘magit-branch-rename’)
Rename a branch. The branch and the new name are read in the
minibuffer. With prefix argument the branch is renamed even if
that name conflicts with an existing branch.
-- User Option: magit-branch-read-upstream-first
When creating a branch, whether to read the upstream branch before
the name of the branch that is to be created. The default is
‘nil’, and I recommend you leave it at that.
-- User Option: magit-branch-prefer-remote-upstream
This option specifies whether remote upstreams are favored over
local upstreams when creating new branches.
When a new branch is created, then the branch, commit, or stash at
point is suggested as the starting point of the new branch, or if
there is no such revision at point the current branch. In either
case the user may choose another starting point.
If the chosen starting point is a branch, then it may also be set
as the upstream of the new branch, depending on the value of the
Git variable ‘branch.autoSetupMerge’. By default this is done for
remote branches, but not for local branches.
You might prefer to always use some remote branch as upstream. If
the chosen starting point is (1) a local branch, (2) whose name
matches a member of the value of this option, (3) the upstream of
that local branch is a remote branch with the same name, and (4)
that remote branch can be fast-forwarded to the local branch, then
the chosen branch is used as starting point, but its own upstream
is used as the upstream of the new branch.
Members of this option’s value are treated as branch names that
have to match exactly unless they contain a character that makes
them invalid as a branch name. Recommended characters to use to
trigger interpretation as a regexp are "*" and "^". Some other
characters which you might expect to be invalid, actually are not,
e.g. ".+$" are all perfectly valid. More precisely, if ‘git
check-ref-format –branch STRING’ exits with a non-zero status, then
treat STRING as a regexp.
Assuming the chosen branch matches these conditions you would end
up with with e.g.:
feature --upstream--> origin/master
instead of
feature --upstream--> master --upstream--> origin/master
Which you prefer is a matter of personal preference. If you do
prefer the former, then you should add branches such as ‘master’,
‘next’, and ‘maint’ to the value of this options.
-- User Option: magit-branch-adjust-remote-upstream-alist
The value of this option is an alist of branches to be used as the
upstream when branching a remote branch.
When creating a local branch from an ephemeral branch located on a
remote, e.g. a feature or hotfix branch, then that remote branch
should usually not be used as the upstream branch, since the
push-remote already allows accessing it and having both the
upstream and the push-remote reference the same related branch
would be wasteful. Instead a branch like "maint" or "master"
should be used as the upstream.
This option allows specifying the branch that should be used as the
upstream when branching certain remote branches. The value is an
alist of the form ‘((UPSTREAM . RULE)...)’. The first matching
element is used, the following elements are ignored.
UPSTREAM is the branch to be used as the upstream for branches
specified by RULE. It can be a local or a remote branch.
RULE can either be a regular expression, matching branches whose
upstream should be the one specified by UPSTREAM. Or it can be a
list of the only branches that should *not* use UPSTREAM; all other
branches will. Matching is done after stripping the remote part of
the name of the branch that is being branched from.
If you use a finite set of non-ephemeral branches across all your
repositories, then you might use something like:
(("origin/master" "master" "next" "maint"))
Or if the names of all your ephemeral branches contain a slash, at
least in some repositories, then a good value could be:
(("origin/master" . "/"))
Of course you can also fine-tune:
(("origin/maint" . "\\`hotfix/")
("origin/master" . "\\`feature/"))
-- Command: magit-branch-orphan
This command creates and checks out a new orphan branch with
contents from a given revision.
-- Command: magit-branch-or-checkout
This command is a hybrid between ‘magit-checkout’ and
‘magit-branch-and-checkout’ and is intended as a replacement for
the former in ‘magit-branch-popup’.
It first asks the user for an existing branch or revision. If the
user input actually can be resolved as a branch or revision, then
it checks that out, just like ‘magit-checkout’ would.
Otherwise it creates and checks out a new branch using the input as
its name. Before doing so it reads the starting-point for the new
branch. This is similar to what ‘magit-branch-and-checkout’ does.
To use this command instead of ‘magit-checkout’ add this to your
init file:
(magit-remove-popup-key 'magit-branch-popup :action ?b)
(magit-define-popup-action 'magit-branch-popup
?b "Checkout" 'magit-branch-or-checkout
'magit-branch t)
File: magit.info, Node: The Branch Config Popup, Next: Auxillary Branch Commands, Prev: The Branch Popup, Up: Branching
6.5.3 The Branch Config Popup
-----------------------------
-- Command: magit-branch-config-popup
This prefix command shows the following branch-related Git
variables in a popup buffer. The values can be changed from that
buffer.
This popup is a sub-popup of several popups that deal with
branches, including ‘magit-branch-popup’, ‘magit-pull-popup’,
‘magit-fetch-popup’, ‘magit-pull-and-fetch-popup’, and
‘magit-push-popup’. In all of these popups "C" is bound to this
popup.
The following variables are used to configure a specific branch. The
values are being displayed for the current branch (if any). To change
the value for another branch invoke ‘magit-branch-config-popup’ with a
prefix argument.
-- Variable: branch.NAME.merge
Together with ‘branch.NAME.remote’ this variable defines the
upstream branch of the local branch named NAME. The value of this
variable is the full reference of the upstream _branch_.
-- Variable: branch.NAME.remote
Together with ‘branch.NAME.merge’ this variable defines the
upstream branch of the local branch named NAME. The value of this
variable is the name of the upstream _remote_.
-- Variable: branch.NAME.rebase
This variable controls whether pulling into the branch named NAME
is done by rebasing or by merging the fetched branch.
• When ‘true’ then pulling is done by rebasing.
• When ‘false’ then pulling is done by merging.
• When undefined then the value of ‘pull.rebase’ is used. The
default of that variable is ‘false’.
-- Variable: branch.NAME.pushRemote
This variable specifies the remote that the branch named NAME is
usually pushed to. The value has to be the name of an existing
remote.
It is not possible to specify the name of _branch_ to push the
local branch to. The name of the remote branch is always the same
as the name of the local branch.
If this variable is undefined but ‘remote.pushDefault’ is defined,
then the value of the latter is used. By default
‘remote.pushDefault’ is undefined.
-- Variable: branch.NAME.description
This variable can be used to describe the branch named NAME. That
description is used e.g. when turning the branch into a series of
patches.
The following variables specify defaults which are used if the above
branch-specific variables are not set.
-- Variable: pull.rebase
This variable specifies whether pulling is done by rebasing or by
merging. It can be overwritten using ‘branch.NAME.rebase’.
• When ‘true’ then pulling is done by rebasing.
• When ‘false’ (the default) then pulling is done by merging.
Since it is never a good idea to merge the upstream branch into a
feature or hotfix branch and most branches are such branches, you
should consider setting this to ‘true’, and ‘branch.master.rebase’
to ‘false’.
-- Variable: remote.pushDefault
This variable specifies what remote the local branches are usually
pushed to. This can be overwritten per branch using
‘branch.NAME.pushRemote’.
The following variables are used during the creation of a branch and
control whether the various branch-specific variables are automatically
set at this time.
-- Variable: branch.autoSetupMerge
This variable specifies under what circumstances creating a branch
NAME should result in the variables ‘branch.NAME.merge’ and
‘branch.NAME.remote’ being set according to the starting point used
to create the branch. If the starting point isn’t a branch, then
these variables are never set.
• When ‘always’ then the variables are set regardless of whether
the starting point is a local or a remote branch.
• When ‘true’ (the default) then the variables are set when the
starting point is a remote branch, but not when it is a local
branch.
• When ‘false’ then the variables are never set.
-- Variable: branch.autoSetupRebase
This variable specifies whether creating a branch NAME should
result in the variable ‘branch.NAME.rebase’ being set to ‘true’.
• When ‘always’ then the variable is set regardless of whether
the starting point is a local or a remote branch.
• When ‘local’ then the variable are set when the starting point
is a local branch, but not when it is a remote branch.
• When ‘remote’ then the variable are set when the starting
point is a remote branch, but not when it is a local branch.
• When ‘never’ (the default) then the variable is never set.
Note that the respective commands always change the repository-local
values. If you want to change the global value, which is used when the
local value is undefined, then you have to do so on the command line,
e.g.:
git config --global remote.autoSetupMerge always
For more information about these variables you should also see
*note (gitman)git-config::. Also see *note (gitman)git-branch::. ,
*note (gitman)git-checkout::. and *note Pushing::.
-- User Option: magit-prefer-remote-upstream
This option controls whether commands that read a branch from the
user and then set it as the upstream branch, offer a local or a
remote branch as default completion candidate, when they have the
choice.
This affects all commands that use ‘magit-read-upstream-branch’ or
‘magit-read-starting-point’, which includes all commands that
change the upstream and many which create new branches.
File: magit.info, Node: Auxillary Branch Commands, Prev: The Branch Config Popup, Up: Branching
6.5.4 Auxillary Branch Commands
-------------------------------
These commands are not available from the branch popup by default.
-- Command: magit-branch-shelve
This command shelve a branch. This is done by deleting the branch,
and creating a new reference "refs/shelved/BRANCH-NAME" pointing at
the same commit as the branch pointed at. If the deleted branch
had a reflog, then that is preserved as the reflog of the new
reference.
This is useful if you want to move a branch out of sight, but are
not ready to completely discard it yet.
-- Command: magit-branch-unshelve
This command unshelve a branch that was previously shelved using
‘magit-branch-shelve’. This is done by deleting the reference
"refs/shelved/BRANCH-NAME" and creating a branch "BRANCH-NAME"
pointing at the same commit as the deleted reference pointed at.
If the deleted reference had a reflog, then that is restored as the
reflog of the branch.
File: magit.info, Node: Merging, Next: Resolving Conflicts, Prev: Branching, Up: Manipulating
6.6 Merging
===========
Also see *note (gitman)git-merge::. For information on how to resolve
merge conflicts see the next section.
‘m’ (‘magit-merge-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
When no merge is in progress, then the popup buffer features the
following commands.
‘m m’ (‘magit-merge’)
This command merges another branch or an arbitrary revision into
the current branch. The branch or revision to be merged is read in
the minibuffer and defaults to the branch at point.
Unless there are conflicts or a prefix argument is used, then the
resulting merge commit uses a generic commit message, and the user
does not get a chance to inspect or change it before the commit is
created. With a prefix argument this does not actually create the
merge commit, which makes it possible to inspect how conflicts were
resolved and to adjust the commit message.
‘m e’ (‘magit-merge-editmsg’)
This command merges another branch or an arbitrary revision into
the current branch and opens a commit message buffer, so that the
user can make adjustments. The commit is not actually created
until the user finishes with ‘C-c C-c’.
‘m n’ (‘magit-merge-nocommit’)
This command merges another branch or an arbitrary revision into
the current branch, but does not actually create the merge commit.
The user can then further adjust the merge, even when automatic
conflict resolution succeeded and/or adjust the commit message.
‘m a’ (‘magit-merge-absorb’)
This command merges another local branch into the current branch
and then removes the former.
Before the source branch is merged, it is first force pushed to its
push-remote, provided the respective remote branch already exists.
This ensures that the respective pull-request (if any) won’t get
stuck on some obsolete version of the commits that are being
merged. Finally, if ‘magit-branch-pull-request’ was used to create
the merged branch, then the respective remote branch is also
removed.
‘m i’ (‘magit-merge-into’)
This command merges the current branch into another local branch
and then removes the former. The latter becomes the new current
branch.
Before the source branch is merged, it is first force pushed to its
push-remote, provided the respective remote branch already exists.
This ensures that the respective pull-request (if any) won’t get
stuck on some obsolete version of the commits that are being
merged. Finally, if ‘magit-branch-pull-request’ was used to create
the merged branch, then the respective remote branch is also
removed.
‘m s’ (‘magit-merge-squash’)
This command squashes the changes introduced by another branch or
an arbitrary revision into the current branch. This only applies
the changes made by the squashed commits. No information is
preserved that would allow creating an actual merge commit.
Instead of this command you should probably use a command from the
apply popup.
‘m p’ (‘magit-merge-preview’)
This command shows a preview of merging another branch or an
arbitrary revision into the current branch.
When a merge is in progress, then the popup buffer features these
commands instead.
‘m m’ (‘magit-merge’)
After the user resolved conflicts, this command proceeds with the
merge. If some conflicts weren’t resolved, then this command
fails.
‘m a’ (‘magit-merge-abort’)
This command aborts the current merge operation.
File: magit.info, Node: Resolving Conflicts, Next: Rebasing, Prev: Merging, Up: Manipulating
6.7 Resolving Conflicts
=======================
When merging branches (or otherwise combining or changing history)
conflicts can occur. If you edited two completely different parts of
the same file in two branches and then merge one of these branches into
the other, then Git can resolve that on its own, but if you edit the
same area of a file, then a human is required to decide how the two
versions, or "sides of the conflict", are to be combined into one.
Here we can only provide a brief introduction to the subject and
point you toward some tools that can help. If you are new to this, then
please also consult Git’s own documentation as well as other resources.
If a file has conflicts and Git cannot resolve them by itself, then
it puts both versions into the affected file along with special markers
whose purpose is to denote the boundaries of the unresolved part of the
file and between the different versions. These boundary lines begin
with the strings consisting of six times the same character, one of ‘<’,
‘|’, ‘=’ and ‘>’ and are followed by information about the source of the
respective versions, e.g.:
<<<<<<< HEAD
Take the blue pill.
=======
Take the red pill.
>>>>>>> feature
In this case you have chosen to take the red pill on one branch and
on another you picked the blue pill. Now that you are merging these two
diverging branches, Git cannot possibly know which pill you want to
take.
To resolve that conflict you have to create a version of the affected
area of the file by keeping only one of the sides, possibly by editing
it in order to bring in the changes from the other side, remove the
other versions as well as the markers, and then stage the result. A
possible resolution might be:
Take both pills.
Often it is useful to see not only the two sides of the conflict but
also the "original" version from before the same area of the file was
modified twice on different branches. Instruct Git to insert that
version as well by running this command once:
git config --global merge.conflictStyle diff3
The above conflict might then have looked like this:
<<<<<<< HEAD
Take the blue pill.
||||||| merged common ancestors
Take either the blue or the red pill, but not both.
=======
Take the red pill.
>>>>>>> feature
If that were the case, then the above conflict resolution would not
have been correct, which demonstrates why seeing the original version
alongside the conflicting versions can be useful.
You can perform the conflict resolution completely by hand, but Emacs
also provides some packages that help in the process: Smerge, Ediff
(*note (ediff)Top::), and Emerge (*note (emacs)Emerge::). Magit does
not provide its own tools for conflict resolution, but it does make
using Smerge and Ediff more convenient. (Ediff supersedes Emerge, so
you probably don’t want to use the latter anyway.)
In the Magit status buffer, files with unresolved conflicts are
listed in the "Unstaged changes" and/or "Staged changes" sections. They
are prefixed with the word "unmerged", which in this context essentially
is a synonym for "unresolved".
Pressing ‘RET’ while point is on such a file section shows a buffer
visiting that file, turns on ‘smerge-mode’ in that buffer, and places
point inside the first area with conflicts. You should then resolve
that conflict using regular edit commands and/or Smerge commands.
Unfortunately Smerge does not have a manual, but you can get a list
of commands and binding ‘C-c ^ C-h’ and press ‘RET’ while point is on a
command name to read its documentation.
Normally you would edit one version and then tell Smerge to keep only
that version. Use ‘C-c ^ m’ (‘smerge-keep-mine’) to keep the ‘HEAD’
version or ‘C-c ^ o’ (‘smerge-keep-other’) to keep the version that
follows "|||||||". Then use ‘C-c ^ n’ to move to the next conflicting
area in the same file. Once you are done resolving conflicts, return to
the Magit status buffer. The file should now be shown as "modified", no
longer as "unmerged", because Smerge automatically stages the file when
you save the buffer after resolving the last conflict.
Alternatively you could use Ediff, which uses separate buffers for
the different versions of the file. To resolve conflicts in a file
using Ediff press ‘e’ while point is on such a file in the status
buffer.
Ediff can be used for other purposes as well. For more information
on how to enter Ediff from Magit, see *note Ediffing::. Explaining how
to use Ediff is beyond the scope of this manual, instead see *note
(ediff)Top::.
If you are unsure whether you should Smerge or Ediff, then use the
former. It is much easier to understand and use, and except for truly
complex conflicts, the latter is usually overkill.
File: magit.info, Node: Rebasing, Next: Cherry Picking, Prev: Resolving Conflicts, Up: Manipulating
6.8 Rebasing
============
Also see *note (gitman)git-rebase::. For information on how to resolve
conflicts that occur during rebases see the preceding section.
‘r’ (‘magit-rebase-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
When no rebase is in progress, then the popup buffer features the
following commands.
Using one of these commands _starts_ a rebase sequence. Git might
then stop somewhere along the way, either because you told it to do so,
or because applying a commit failed due to a conflict. When that
happens, then the status buffer shows information about the rebase
sequence which is in progress in a section similar to a log section.
See *note Information About In-Progress Rebase::.
‘r p’ (‘magit-rebase-onto-pushremote’)
Rebase the current branch onto ‘branch.<name>.pushRemote’. If that
variable is unset, then rebase onto ‘remote.pushDefault’.
‘r u’ (‘magit-rebase-onto-upstream’)
Rebase the current branch onto its upstream branch.
‘r e’ (‘magit-rebase’)
Rebase the current branch onto a branch read in the minibuffer.
All commits that are reachable from head but not from the selected
branch TARGET are being rebased."
‘r s’ (‘magit-rebase-subset’)
Start a non-interactive rebase sequence with commits from START to
‘HEAD’ onto NEWBASE. START has to be selected from a list of
recent commits.
By default Magit uses the ‘--autostash’ argument, which causes
uncommitted changes to be stored in a stash before the rebase begins.
These changes are restored after the rebase completes and if possible
the stash is removed. If the stash does not apply cleanly, then the
stash is not removed. In case something goes wrong when resolving the
conflicts, this allows you to start over.
Even though one of the actions is dedicated to interactive rebases,
the popup also features the infix argument ‘--interactive’. This can be
used to turn one of the other, non-interactive rebase variants into an
interactive rebase.
For example if you want to clean up a feature branch and at the same
time rebase it onto ‘master’, then you could use ‘r-iu’. But we
recommend that you instead do that in two steps. First use ‘ri’ to
cleanup the feature branch, and then in a second step ‘ru’ to rebase it
onto ‘master’. That way if things turn out to be more complicated than
you thought and/or you make a mistake and have to start over, then you
only have to redo half the work.
Explicitly enabling ‘--interactive’ won’t have an effect on the
following commands as they always use that argument anyway, even if it
is not enabled in the popup.
‘r i’ (‘magit-rebase-interactive’)
Start an interactive rebase sequence.
‘r f’ (‘magit-rebase-autosquash’)
Combine squash and fixup commits with their intended targets.
‘r m’ (‘magit-rebase-edit-commit’)
Edit a single older commit using rebase.
‘r w’ (‘magit-rebase-reword-commit’)
Reword a single older commit using rebase.
‘r k’ (‘magit-rebase-remove-commit’)
Remove a single older commit using rebase.
When a rebase is in progress, then the popup buffer features these
commands instead.
‘r r’ (‘magit-rebase-continue’)
Restart the current rebasing operation.
In some cases this pops up a commit message buffer for you do edit.
With a prefix argument the old message is reused as-is.
‘r s’ (‘magit-rebase-skip’)
Skip the current commit and restart the current rebase operation.
‘r e’ (‘magit-rebase-edit’)
Edit the todo list of the current rebase operation.
‘r a’ (‘magit-rebase-abort’)
Abort the current rebase operation, restoring the original branch.
* Menu:
* Editing Rebase Sequences::
* Information About In-Progress Rebase::
File: magit.info, Node: Editing Rebase Sequences, Next: Information About In-Progress Rebase, Up: Rebasing
6.8.1 Editing Rebase Sequences
------------------------------
‘C-c C-c’ (‘with-editor-finish’)
Finish the current editing session by returning with exit code 0.
Git then uses the rebase instructions it finds in the file.
‘C-c C-k’ (‘with-editor-cancel’)
Cancel the current editing session by returning with exit code 1.
Git then forgoes starting the rebase sequence.
‘RET’ (‘git-rebase-show-commit’)
Show the commit on the current line in another buffer and select
that buffer.
‘SPC’ (‘git-rebase-show-or-scroll-up’)
Show the commit on the current line in another buffer without
selecting that buffer. If the revision buffer is already visible
in another window of the current frame, then instead scroll that
window up.
‘DEL’ (‘git-rebase-show-or-scroll-down’)
Show the commit on the current line in another buffer without
selecting that buffer. If the revision buffer is already visible
in another window of the current frame, then instead scroll that
window down.
‘p’ (‘git-rebase-backward-line’)
Move to previous line.
‘n’ (‘forward-line’)
Move to next line.
‘M-p’ (‘git-rebase-move-line-up’)
Move the current commit (or command) up.
‘M-n’ (‘git-rebase-move-line-down’)
Move the current commit (or command) down.
‘r’ (‘git-rebase-reword’)
Edit message of commit on current line.
‘e’ (‘git-rebase-edit’)
Stop at the commit on the current line.
‘s’ (‘git-rebase-squash’)
Meld commit on current line into previous commit, and edit message.
‘f’ (‘git-rebase-fixup’)
Meld commit on current line into previous commit, discarding the
current commit’s message.
‘k’ (‘git-rebase-kill-line’)
Kill the current action line.
‘c’ (‘git-rebase-pick’)
Use commit on current line.
‘x’ (‘git-rebase-exec’)
Insert a shell command to be run after the proceeding commit.
If there already is such a command on the current line, then edit
that instead. With a prefix argument insert a new command even
when there already is one on the current line. With empty input
remove the command on the current line, if any.
‘y’ (‘git-rebase-insert’)
Read an arbitrary commit and insert it below current line.
‘C-x u’ (‘git-rebase-undo’)
Undo some previous changes. Like ‘undo’ but works in read-only
buffers.
-- User Option: git-rebase-auto-advance
Whether to move to next line after changing a line.
-- User Option: git-rebase-show-instructions
Whether to show usage instructions inside the rebase buffer.
-- User Option: git-rebase-confirm-cancel
Whether confirmation is required to cancel.
File: magit.info, Node: Information About In-Progress Rebase, Prev: Editing Rebase Sequences, Up: Rebasing
6.8.2 Information About In-Progress Rebase
------------------------------------------
While a rebase sequence is in progress, the status buffer features a
section that lists the commits that have already been applied as well as
the commits that still have to be applied.
The commits are split in two halves. When rebase stops at a commit,
either because the user has to deal with a conflict or because s/he
explicitly requested that rebase stops at that commit, then point is
placed on the commit that separates the two groups, i.e. on ‘HEAD’.
The commits above it have not been applied yet, while the ‘HEAD’ and the
commits below it have already been applied. In between these two groups
of applied and yet-to-be applied commits, there sometimes is a commit
which has been dropped.
Each commit is prefixed with a word and these words are additionally
shown in different colors to indicate the status of the commits.
The following colors are used:
• Yellow commits have not been applied yet.
• Gray commits have already been applied.
• The blue commit is the ‘HEAD’ commit.
• The green commit is the commit the rebase sequence stopped at. If
this is the same commit as ‘HEAD’ (e.g. because you haven’t done
anything yet after rebase stopped at the commit, then this commit
is shown in blue, not green). There can only be a green *and* a
blue commit at the same time, if you create one or more new commits
after rebase stops at a commit.
• Red commits have been dropped. They are shown for reference only,
e.g. to make it easier to diff.
Of course these colors are subject to the color-theme in use.
The following words are used:
• Commits prefixed with ‘pick’, ‘reword’, ‘edit’, ‘squash’, and
‘fixup’ have not been applied yet. These words have the same
meaning here as they do in the buffer used to edit the rebase
sequence. See *note Editing Rebase Sequences::.
• Commits prefixed with ‘done’ and ‘onto’ have already been applied.
It is possible for such a commit to be the ‘HEAD’, in which case it
is blue. Otherwise it is grey.
• The commit prefixed with ‘onto’ is the commit on top of which
all the other commits are being re-applied. This commit
itself did not have to be re-applied, it is the commit rebase
did rewind to before starting to re-apply other commits.
• Commits prefixed with ‘done’ have already been re-applied.
This includes commits that have been re-applied but also new
commits that you have created during the rebase.
• All other commits, those not prefixed with any of the above words,
are in some way related to the commit at which rebase stopped.
To determine whether a commit is related to the stopped-at commit
their hashes, trees and patch-ids (1) are being compared. The
commit message is not used for this purpose.
Generally speaking commits that are related to the stopped-at
commit can have any of the used colors, though not all color/word
combinations are possible.
Words used for stopped-at commits are:
• When a commit is prefixed with ‘void’, then that indicates
that Magit knows for sure that all the changes in that commit
have been applied using several new commits. This commit is
no longer reachable from ‘HEAD’, and it also isn’t one of the
commits that will be applied when resuming the session.
• When a commit is prefixed with ‘join’, then that indicates
that the rebase sequence stopped at that commit due to a
conflict - you now have to join (merge) the changes with what
has already been applied. In a sense this is the commit
rebase stopped at, but while its effect is already in the
index and in the worktree (with conflict markers), the commit
itself has not actually been applied yet (it isn’t the
‘HEAD’). So it is shown in yellow, like the other commits
that still have to be applied.
• When a commit is prefixed with ‘stop’ or a _blue_ or _green_
‘same’, then that indicates that rebase stopped at this
commit, that it is still applied or has been applied again,
and that at least its patch-id is unchanged.
• When a commit is prefixed with ‘stop’, then that
indicates that rebase stopped at that commit because you
requested that earlier, and its patch-id is unchanged.
It might even still be the exact same commit.
• When a commit is prefixed with a _blue_ or _green_
‘same’, then that indicates that while its tree or hash
changed, its patch-id did not. If it is blue, then it is
the ‘HEAD’ commit (as always for blue). When it is
green, then it no longer is ‘HEAD’ because other commit
have been created since (but before continuing the
rebase).
• When a commit is prefixed with ‘goal’, a _yellow_ ‘same,’ or
‘work’, then that indicates that rebase applied that commit
but that you then reset ‘HEAD’ to an earlier commit (likely to
split it up into multiple commits), and that there are some
uncommitted changes remaining which likely (but not
necessarily) originate from that commit.
• When a commit is prefixed with ‘goal’, then that
indicates that it is still possible to create a new
commit with the exact same tree (the "goal") without
manually editing any files, by committing the index, or
by staging all changes and then committing that. This is
the case when the original tree still exists in the index
or worktree in untainted form.
• When a commit is prefixed with a yellow ‘same’, then that
indicates that it is no longer possible to create a
commit with the exact same tree, but that it is still
possible to create a commit with the same patch-id. This
would be the case if you created a new commit with other
changes, but the changes from the original commit still
exist in the index or working tree in untainted form.
• When a commit is prefixed with ‘work’, then that
indicates that you reset ‘HEAD’ to an earlier commit, and
that there are some staged and/or unstaged changes
(likely, but not necessarily) originating from that
commit. However it is no longer possible to create a new
commit with the same tree or at least the same patch-id
because you have already made other changes.
• When a commit is prefixed with ‘poof’ or ‘gone’, then that
indicates that rebase applied that commit but that you then
reset ‘HEAD’ to an earlier commit (likely to split it up into
multiple commits), and that there are no uncommitted changes.
• When a commit is prefixed with ‘poof’, then that
indicates that it is no longer reachable from ‘HEAD’, but
that it has been replaced with one or more commits, which
together have the exact same effect.
• When a commit is prefixed with ‘gone’, then that
indicates that it is no longer reachable from ‘HEAD’ and
that we also cannot determine whether its changes are
still in effect in one or more new commits. They might
be, but if so, then there must also be other changes
which makes it impossible to know for sure.
Do not worry if you do not fully understand the above. That’s okay,
you will acquire a good enough understanding through practice.
For other sequence operations such as cherry-picking, a similar
section is displayed, but they lack some of the features described
above, due to limitations in the git commands used to implement them.
Most importantly these sequences only support "picking" a commit but not
other actions such as "rewording", and they do not keep track of the
commits which have already been applied.
---------- Footnotes ----------
(1) The patch-id is a hash of the _changes_ introduced by a commit.
It differs from the hash of the commit itself, which is a hash of the
result of applying that change (i.e. the resulting trees and blobs) as
well as author and committer information, the commit message, and the
hashes of the parents of the commit. The patch-id hash on the other
hand is created only from the added and removed lines, even line numbers
and whitespace changes are ignored when calculating this hash. The
patch-ids of two commits can be used to answer the question "Do these
commits make the same change?".
File: magit.info, Node: Cherry Picking, Next: Resetting, Prev: Rebasing, Up: Manipulating
6.9 Cherry Picking
==================
Also see *note (gitman)git-cherry-pick::.
‘A’ (‘magit-cherry-pick-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
When no cherry-pick or revert is in progress, then the popup buffer
features the following commands.
‘A A’ (‘magit-cherry-pick’)
This command copies COMMITS from another branch onto the current
branch. If the region selects multiple commits, then those are
copied, without prompting. Otherwise the user is prompted for a
commit or range, defaulting to the commit at point.
‘A a’ (‘magit-cherry-apply’)
This command applies the changes in COMMITS from another branch
onto the current branch. If the region selects multiple commits,
then those are used, without prompting. Otherwise the user is
prompted for a commit or range, defaulting to the commit at point.
This command also has a top-level binding, which can be invoked
without using the popup by typing ‘a’ at the top-level.
The following commands not only apply some commits to some branch,
but also remove them from some other branch. The removal is performed
using either ‘git-update-ref’ or if necessary ‘git-rebase’. Both
applying commits as well as removing them using ‘git-rebase’ can lead to
conflicts. If that happens, then these commands abort and you not only
have to resolve the conflicts but also finish the process the same way
you would have to if these commands didn’t exist at all.
‘A h’ (‘magit-cherry-harvest’)
This command moves the selected COMMITS that must be located on
another BRANCH onto the current branch instead, removing them from
the former. When this command succeeds, then the same branch is
current as before.
Applying the commits on the current branch or removing them from
the other branch can lead to conflicts. When that happens, then
this command stops and you have to resolve the conflicts and then
finish the process manually.
‘A d’ (‘magit-cherry-donate’)
This command moves the selected COMMITS from the current branch
onto another existing BRANCH, removing them from the former. When
this command succeeds, then the same branch is current as before.
Applying the commits on the other branch or removing them from the
current branch can lead to conflicts. When that happens, then this
command stops and you have to resolve the conflicts and then finish
the process manually.
‘A n’ (‘magit-cherry-spinout’)
This command moves the selected COMMITS from the current branch
onto a new branch BRANCH, removing them from the former. When this
command succeeds, then the same branch is current as before.
Applying the commits on the other branch or removing them from the
current branch can lead to conflicts. When that happens, then this
command stops and you have to resolve the conflicts and then finish
the process manually.
‘A s’ (‘magit-cherry-spinoff’)
This command moves the selected COMMITS from the current branch
onto a new branch BRANCH, removing them from the former. When this
command succeeds, then the new branch is checked out.
Applying the commits on the other branch or removing them from the
current branch can lead to conflicts. When that happens, then this
command stops and you have to resolve the conflicts and then finish
the process manually.
When a cherry-pick or revert is in progress, then the popup buffer
features these commands instead.
‘A A’ (‘magit-sequence-continue’)
Resume the current cherry-pick or revert sequence.
‘A s’ (‘magit-sequence-skip’)
Skip the stopped at commit during a cherry-pick or revert sequence.
‘A a’ (‘magit-sequence-abort’)
Abort the current cherry-pick or revert sequence. This discards
all changes made since the sequence started.
* Menu:
* Reverting::
File: magit.info, Node: Reverting, Up: Cherry Picking
6.9.1 Reverting
---------------
‘V’ (‘magit-revert-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
When no cherry-pick or revert is in progress, then the popup buffer
features the following commands.
‘V V’ (‘magit-revert’)
Revert a commit by creating a new commit. Prompt for a commit,
defaulting to the commit at point. If the region selects multiple
commits, then revert all of them, without prompting.
‘V v’ (‘magit-revert-no-commit’)
Revert a commit by applying it in reverse to the working tree.
Prompt for a commit, defaulting to the commit at point. If the
region selects multiple commits, then revert all of them, without
prompting.
When a cherry-pick or revert is in progress, then the popup buffer
features these commands instead.
‘V A’ (‘magit-sequence-continue’)
Resume the current cherry-pick or revert sequence.
‘V s’ (‘magit-sequence-skip’)
Skip the stopped at commit during a cherry-pick or revert sequence.
‘V a’ (‘magit-sequence-abort’)
Abort the current cherry-pick or revert sequence. This discards
all changes made since the sequence started.
File: magit.info, Node: Resetting, Next: Stashing, Prev: Cherry Picking, Up: Manipulating
6.10 Resetting
==============
Also see *note (gitman)git-reset::.
‘x’ (‘magit-reset’)
Reset the head and index to some commit read from the user and
defaulting to the commit at point. The working tree is kept as-is.
With a prefix argument also reset the working tree.
‘X m’ (‘magit-reset-head’)
Reset the ‘HEAD’ and index to some commit read from the user and
defaulting to the commit at point. The working tree is kept as-is.
‘X s’ (‘magit-reset-soft’)
Reset the ‘HEAD’ to some commit read from the user and defaulting
to the commit at point. The index and the working tree are kept
as-is.
‘X h’ (‘magit-reset-hard’)
Reset the ‘HEAD’, index, and working tree to some commit read from
the user and defaulting to the commit at point.
‘X i’ (‘magit-reset-index’)
Reset the index to some commit read from the user and defaulting to
the commit at point. Keep the ‘HEAD’ and working tree as-is, so if
the commit refers to the ‘HEAD’, then this effectively unstages all
changes.
‘X f’ (‘magit-file-checkout’)
Update file in the working tree and index to the contents from a
revision. Both the revision and file are read from the user.
File: magit.info, Node: Stashing, Prev: Resetting, Up: Manipulating
6.11 Stashing
=============
Also see *note (gitman)git-stash::.
‘z’ (‘magit-stash-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘z z’ (‘magit-stash’)
Create a stash of the index and working tree. Untracked files are
included according to popup arguments. One prefix argument is
equivalent to ‘--include-untracked’ while two prefix arguments are
equivalent to ‘--all’.
‘z i’ (‘magit-stash-index’)
Create a stash of the index only. Unstaged and untracked changes
are not stashed.
‘z w’ (‘magit-stash-worktree’)
Create a stash of unstaged changes in the working tree. Untracked
files are included according to popup arguments. One prefix
argument is equivalent to ‘--include-untracked’ while two prefix
arguments are equivalent to ‘--all’.
‘z x’ (‘magit-stash-keep-index’)
Create a stash of the index and working tree, keeping index intact.
Untracked files are included according to popup arguments. One
prefix argument is equivalent to ‘--include-untracked’ while two
prefix arguments are equivalent to ‘--all’.
‘z Z’ (‘magit-snapshot’)
Create a snapshot of the index and working tree. Untracked files
are included according to popup arguments. One prefix argument is
equivalent to ‘--include-untracked’ while two prefix arguments are
equivalent to ‘--all’.
‘z I’ (‘magit-snapshot-index’)
Create a snapshot of the index only. Unstaged and untracked
changes are not stashed.
‘z W’ (‘magit-snapshot-worktree’)
Create a snapshot of unstaged changes in the working tree.
Untracked files are included according to popup arguments. One
prefix argument is equivalent to ‘--include-untracked’ while two
prefix arguments are equivalent to ‘--all’-.
‘z a’ (‘magit-stash-apply’)
Apply a stash to the working tree. Try to preserve the stash
index. If that fails because there are staged changes, apply
without preserving the stash index.
‘z p’ (‘magit-stash-pop’)
Apply a stash to the working tree and remove it from stash list.
Try to preserve the stash index. If that fails because there are
staged changes, apply without preserving the stash index and forgo
removing the stash.
‘z k’ (‘magit-stash-drop’)
Remove a stash from the stash list. When the region is active,
offer to drop all contained stashes.
‘z v’ (‘magit-stash-show’)
Show all diffs of a stash in a buffer.
‘z b’ (‘magit-stash-branch’)
Create and checkout a new BRANCH from STASH. The branch starts at
the commit that was current when the stash was created.
‘z B’ (‘magit-stash-branch-here’)
Create and checkout a new BRANCH using ‘magit-branch’ with the
current branch or ‘HEAD’ as the starting-point. Then apply STASH,
dropping it if it applies cleanly.
‘z f’ (‘magit-stash-format-patch’)
Create a patch from STASH.
‘k’ (‘magit-stash-clear’)
Remove all stashes saved in REF’s reflog by deleting REF.
‘z l’ (‘magit-stash-list’)
List all stashes in a buffer.
-- User Option: magit-stashes-margin
This option specifies whether the margin is initially shown in
stashes buffers and how it is formatted.
The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
• If INIT is non-nil, then the margin is shown initially.
• STYLE controls how to format the committer date. It can be
one of ‘age’ (to show the age of the commit),
‘age-abbreviated’ (to abbreviate the time unit to a
character), or a string (suitable for ‘format-time-string’) to
show the actual date.
• WIDTH controls the width of the margin. This exists for
forward compatibility and currently the value should not be
changed.
• AUTHOR controls whether the name of the author is also shown
by default.
• AUTHOR-WIDTH has to be an integer. When the name of the
author is shown, then this specifies how much space is used to
do so.
File: magit.info, Node: Transferring, Next: Miscellaneous, Prev: Manipulating, Up: Top
7 Transferring
**************
* Menu:
* Remotes::
* Fetching::
* Pulling::
* Pushing::
* Creating and Sending Patches::
* Applying Patches::
File: magit.info, Node: Remotes, Next: Fetching, Up: Transferring
7.1 Remotes
===========
* Menu:
* The Remote Popup::
* The Remote Config Popup::
File: magit.info, Node: The Remote Popup, Next: The Remote Config Popup, Up: Remotes
7.1.1 The Remote Popup
----------------------
The popup ‘magit-remote-popup’ is used to add remotes and to make
changes to existing remotes. This popup only deals with remotes
themselves, not with branches or the transfer of commits. Those
features are available from separate popups.
Also see *note (gitman)git-remote::.
‘M’ (‘magit-remote-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
-- User Option: magit-remote-popup-show-variables
This option controls whether the ‘magit-remote-popup’ shows remote
related Git variables. When set to nil, no variables are displayed
directly in this popup, and the sub-popup
‘magit-remote-config-popup’ has to be used instead to view and
change remote related variables.
‘M C’ (‘magit-remote-config-popup’)
This command shows remote related variables in a separate popup.
By default this asks the user for which remote the variables should
be shown. When ‘magit-remote-popup-show-variables’ is ‘nil’, then
it shows the variables for the upstream of the current branch or
"origin" it that branch has no remote upstream. To select another
remote use a prefix argument.
‘M a’ (‘magit-remote-add’)
This command add a remote and fetches it. The remote name and url
are read in the minibuffer.
‘M r’ (‘magit-remote-rename’)
This command renames a remote. Both the old and the new names are
read in the minibuffer.
‘M u’ (‘magit-remote-set-url’)
This command changes the url of a remote. Both the remote and the
new url are read in the minibuffer.
‘M k’ (‘magit-remote-remove’)
This command deletes a remote, read in the minibuffer.
‘M p’ (‘magit-remote-prune’)
This command removes stale remote-tracking branches for a remote
read in the minibuffer.
‘M P’ (‘magit-remote-prune-refspecs’)
This command removes stale refspecs for a remote read in the
minibuffer.
A refspec is stale if there no longer exists at least one branch on
the remote that would be fetched due to that refspec. A stale
refspec is problematic because its existence causes Git to refuse
to fetch according to the remaining non-stale refspecs.
If only stale refspecs remain, then this command offers to either
delete the remote or to replace the stale refspecs with the default
refspec ("+refs/heads/*:refs/remotes/REMOTE/*").
This command also removes the remote-tracking branches that were
created due to the now stale refspecs. Other stale branches are
not removed.
-- User Option: magit-remote-add-set-remote.pushDefault
This option controls whether the user is asked whether they want to
set ‘remote.pushDefault’ after adding a remote.
If ‘ask’, then users is always ask. If ‘ask-if-unset’, then the
user is only if the variable isn’t set already. If ‘nil’, then the
user isn’t asked and the variable isn’t set. If the value is a
string, then the variable is set without the user being asked,
provided that the name of the added remote is equal to that string
and the variable isn’t already set.
File: magit.info, Node: The Remote Config Popup, Prev: The Remote Popup, Up: Remotes
7.1.2 The Remote Config Popup
-----------------------------
-- Command: magit-remote-config-popup
This prefix command shows the following remote-related Git
variables in a popup buffer. The values can be changed from that
buffer.
This popup is a sub-popup of the ‘magit-remote-popup’ in which "C"
is bound to this popup.
The following variables are used to configure a specific remote. The
values are being displayed for the upstream remote of the current
branch. To change the value for another remote invoke
‘magit-remote-config-popup’ with a prefix argument.
-- Variable: remote.NAME.url
This variable specifies the url of the remote named NAME. It can
have multiple values.
-- Variable: remote.NAME.fetch
The refspec used when fetching from the remote named NAME. It can
have multiple values.
-- Variable: remote.NAME.pushurl
This variable specifies the url used for fetching from the remote
named NAME. If it is not specified, then ‘remote.NAME.url’ is used
instead. It can have multiple values.
-- Variable: remote.NAME.push
The refspec used when pushing to the remote named NAME. It can
have multiple values.
-- Variable: remote.NAME.tagOpts
This variable specifies what tags are fetched by default. If the
value is ‘--no-tags’ then no tags are fetched. If the value is
‘--tags’, then all tags are fetched. If this variable has not
value, then only tags are fetched that are reachable from fetched
branches.
File: magit.info, Node: Fetching, Next: Pulling, Prev: Remotes, Up: Transferring
7.2 Fetching
============
For information about the differences between the _upstream_ and the
_push-remote_, see *note Branching::.
Also see *note (gitman)git-fetch::.
‘f’ (‘magit-fetch-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘f p’ (‘magit-fetch-from-pushremote’)
Fetch from the push-remote of the current branch.
‘f u’ (‘magit-fetch-from-upstream’)
Fetch from the upstream of the current branch.
‘f e’ (‘magit-fetch’)
Fetch from another repository.
‘f o’ (‘magit-fetch-branch’)
Fetch a branch from a remote, both of which are read from the
minibuffer.
‘f r’ (‘magit-fetch-refspec’)
Fetch from a remote using an explicit refspec, both of which are
read from the minibuffer.
‘f a’ (‘magit-fetch-all’)
Fetch from all remotes.
‘f m’ (‘magit-submodule-fetch’)
Fetch all submodules. With a prefix argument fetch all remotes of
all submodules.
Instead of using one popup for fetching and another for pulling, you
could also use ‘magit-pull-and-fetch-popup’. See its doc-string for
more information.
File: magit.info, Node: Pulling, Next: Pushing, Prev: Fetching, Up: Transferring
7.3 Pulling
===========
For information about the differences between the _upstream_ and the
_push-remote_, see *note Branching::.
Also see *note (gitman)git-pull::.
‘F’ (‘magit-pull-popup’)
This prefix command shows the following suffix commands in a popup
buffer.
‘F p’ (‘magit-pull-from-pushremote’)
Pull from the push-remote of the current branch.
‘F u’ (‘magit-pull-from-upstream’)
Pull from the upstream of the current branch.
‘F e’ (‘magit-pull’)
Pull from a branch read in the minibuffer.
Instead of using one popup for fetching and another for pulling, you
could also use ‘magit-pull-and-fetch-popup’. See its doc-string for
more information.
File: magit.info, Node: Pushing, Next: Creating and Sending Patches, Prev: Pulling, Up: Transferring
7.4 Pushing
===========
For information about the differences between the _upstream_ and the
_push-remote_, see *note Branching::.
Also see *note (gitman)git-push::.
‘P’ (‘magit-push-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘P p’ (‘magit-push-current-to-pushremote’)
Push the current branch to ‘branch.<name>.pushRemote’ or if that is
unset to ‘remote.pushDefault’.
When ‘magit-push-current-set-remote-if-missing’ is non-nil and the
push-remote is not configured, then read the push-remote from the
user, set it, and then push to it. With a prefix argument the
push-remote can be changed before pushed to it.
‘P u’ (‘magit-push-current-to-upstream’)
Push the current branch to its upstream branch.
When ‘magit-push-current-set-remote-if-missing’ is non-nil and the
push-remote is not configured, then read the upstream from the
user, set it, and then push to it. With a prefix argument the
push-remote can be changed before pushed to it.
‘P e’ (‘magit-push-current’)
Push the current branch to a branch read in the minibuffer.
‘P o’ (‘magit-push’)
Push an arbitrary branch or commit somewhere. Both the source and
the target are read in the minibuffer.
‘P r’ (‘magit-push-refspecs’)
Push one or multiple refspecs to a remote, both of which are read
in the minibuffer.
To use multiple refspecs, separate them with commas. Completion is
only available for the part before the colon, or when no colon is
used.
‘P m’ (‘magit-push-matching’)
Push all matching branches to another repository. If multiple
remotes exit, then read one from the user. If just one exists, use
that without requiring confirmation.
‘P t’ (‘magit-push-tags’)
Push all tags to another repository. If only one remote exists,
then push to that. Otherwise prompt for a remote, offering the
remote configured for the current branch as default.
‘P T’ (‘magit-push-tag’)
Push a tag to another repository.
Two more push commands exist, which by default are not available from
the push popup. See their doc-strings for instructions on how to add
them to the popup.
-- Command: magit-push-implicitly args
Push somewhere without using an explicit refspec.
This command simply runs ‘git push -v [ARGS]’. ARGS are the
arguments specified in the popup buffer. No explicit refspec
arguments are used. Instead the behavior depends on at least these
Git variables: ‘push.default’, ‘remote.pushDefault’,
‘branch.<branch>.pushRemote’, ‘branch.<branch>.remote’,
‘branch.<branch>.merge’, and ‘remote.<remote>.push’.
-- Command: magit-push-to-remote remote args
Push to the remote REMOTE without using an explicit refspec. The
remote is read in the minibuffer.
This command simply runs ‘git push -v [ARGS] REMOTE’. ARGS are the
arguments specified in the popup buffer. No refspec arguments are
used. Instead the behavior depends on at least these Git
variables: ‘push.default’, ‘remote.pushDefault’,
‘branch.<branch>.pushRemote’, ‘branch.<branch>.remote’,
‘branch.<branch>.merge’, and ‘remote.<remote>.push’.
-- User Option: magit-push-current-set-remote-if-missing
This option controls whether missing remotes are configured before
pushing.
When ‘nil’, then the command ‘magit-push-current-to-pushremote’ and
‘magit-push-current-to-upstream’ do not appear in the push popup if
the push-remote resp. upstream is not configured. If the user
invokes one of these commands anyway, then it raises an error.
When ‘non-nil’, then these commands always appear in the push
popup. But if the required configuration is missing, then they do
appear in a way that indicates that this is the case. If the user
invokes one of them, then it asks for the necessary configuration,
stores the configuration, and then uses it to push a first time.
This option also affects whether the argument ‘--set-upstream’ is
available in the popup. If the value is ‘non-nil’, then that
argument is redundant. But note that changing the value of this
option does not take affect immediately, the argument will only be
added or removed after restarting Emacs.
File: magit.info, Node: Creating and Sending Patches, Next: Applying Patches, Prev: Pushing, Up: Transferring
7.5 Creating and Sending Patches
================================
‘W’ (‘magit-patch-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘W p’ (‘magit-format-patch’)
Create patches for a set commits. If the region marks commits,
then create patches for those. Otherwise prompt for a range or a
single commit, defaulting to the commit at point.
‘W r’ (‘magit-request-pull’)
Request that upstream pulls from your public repository.
It is also possible to save a plain patch file by using ‘C-x C-w’
inside a ‘magit-diff-mode’ or ‘magit-revision-mode’ buffer.
File: magit.info, Node: Applying Patches, Prev: Creating and Sending Patches, Up: Transferring
7.6 Applying Patches
====================
Also see *note (gitman)git-am::. and *note (gitman)git-apply::.
‘w’ (‘magit-am-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘w w’ (‘magit-am-apply-patches’)
Apply one or more patches. If the region marks files, then apply
those patches. Otherwise read a file name in the minibuffer
defaulting to the file at point.
‘w m’ (‘magit-am-apply-maildir’)
Apply the patches from a maildir.
When an "am" operation is in progress, then the popup buffer features
these commands instead.
‘w w’ (‘magit-am-continue’)
Resume the current patch applying sequence.
‘w s’ (‘magit-am-skip’)
Skip the stopped at patch during a patch applying sequence.
‘w a’ (‘magit-am-abort’)
Abort the current patch applying sequence. This discards all
changes made since the sequence started.
In addition to the commands listed at the top, the "am" popup also
has a binding for the related "patch" popup.
‘w a’ (‘magit-patch-apply-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘w a a’ (‘magit-patch-apply’)
This command applies a simple patch file, which may not contain any
Git metadata in addition to the actual diff.
File: magit.info, Node: Miscellaneous, Next: Customizing, Prev: Transferring, Up: Top
8 Miscellaneous
***************
* Menu:
* Tagging::
* Notes::
* Submodules::
* Subtree::
* Worktree::
* Common Commands::
* Wip Modes::
* Minor Mode for Buffers Visiting Files::
* Minor Mode for Buffers Visiting Blobs::
File: magit.info, Node: Tagging, Next: Notes, Up: Miscellaneous
8.1 Tagging
===========
Also see *note (gitman)git-tag::.
‘t’ (‘magit-tag-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘t t’ (‘magit-tag’)
Create a new tag with the given NAME at REV. With a prefix
argument annotate the tag.
‘t k’ (‘magit-tag-delete’)
Delete one or more tags. If the region marks multiple tags (and
nothing else), then offer to delete those. Otherwise, prompt for a
single tag to be deleted, defaulting to the tag at point.
‘t p’ (‘magit-tag-prune’)
Offer to delete tags missing locally from REMOTE, and vice versa.
-- Command: magit-tag-release
Create an opinionated release tag.
Assume version tags that match "\\‘v?[0-9]\*\\’". Prompt for the
name of the new tag using the highest existing tag as initial input
and call "git tag –annotate –sign -m MSG" TAG, regardless of
whether these arguments are enabled in the popup. Given a TAG
"v1.2.3" and a repository "/path/to/foo-bar", the MESSAGE would be
"Foo-Bar 1.2.3".
Because it is so opinionated, this command is not available from
the tag popup by default.
File: magit.info, Node: Notes, Next: Submodules, Prev: Tagging, Up: Miscellaneous
8.2 Notes
=========
Also see *note (gitman)git-notes::.
‘T’ (‘magit-notes-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
‘T T’ (‘magit-notes-edit’)
Edit the note attached to a commit, defaulting to the commit at
point.
By default use the value of Git variable ‘core.notesRef’ or
"refs/notes/commits" if that is undefined.
‘T r’ (‘magit-notes-remove’)
Remove the note attached to a commit, defaulting to the commit at
point.
By default use the value of Git variable ‘core.notesRef’ or
"refs/notes/commits" if that is undefined.
‘T p’ (‘magit-notes-prune’)
Remove notes about unreachable commits.
It is possible to merge one note ref into another. That may result
in conflicts which have to resolved in the temporary worktree
".git/NOTES_MERGE_WORKTREE".
‘T m’ (‘magit-notes-merge’)
Merge the notes of a ref read from the user into the current notes
ref. The current notes ref is the value of Git variable
‘core.notesRef’ or "refs/notes/commits" if that is undefined.
When a notes merge is in progress then the popup features the
following suffix commands, instead of those listed above.
‘T c’ (‘magit-notes-merge-commit’)
Commit the current notes ref merge, after manually resolving
conflicts.
‘T a’ (‘magit-notes-merge-abort’)
Abort the current notes ref merge.
The following variables control what notes reference ‘magit-notes-*’,
‘git notes’ and ‘git show’ act on and display. Both the local and
global values are displayed and can be modified.
-- Variable: core.notesRef
This variable specifies the notes ref that is displayed by default
and which commands act on by default.
-- Variable: notes.displayRef
This variable specifies additional notes ref to be displayed in
addition to the ref specified by ‘core.notesRef’. It can have
multiple values and may end with ‘*’ to display all refs in the
‘refs/notes/’ namespace (or ‘**’ if some names contain slashes).
File: magit.info, Node: Submodules, Next: Subtree, Prev: Notes, Up: Miscellaneous
8.3 Submodules
==============
Also see *note (gitman)git-submodule::.
* Menu:
* Listing Submodules::
* Submodule Popup::
File: magit.info, Node: Listing Submodules, Next: Submodule Popup, Up: Submodules
8.3.1 Listing Submodules
------------------------
The command ‘magit-list-submodules’ displays a list of the current
repository’s submodules in a separate buffer. It’s also possible to
display information about submodules directly in the status buffer of
the super-repository by adding ‘magit-insert-submodules’ to the hook
‘magit-status-sections-hook’ as described in *note Status Module
Sections::.
-- Command: magit-list-submodules
This command displays a list of the current repository’s submodules
in a separate buffer.
It can be invoked by pressing ‘RET’ on the section titled
"Modules".
-- User Option: magit-submodule-list-columns
This option controls what columns are displayed by the command
‘magit-list-submodules’ and how they are displayed.
Each element has the form ‘(HEADER WIDTH FORMAT PROPS)’.
HEADER is the string displayed in the header. WIDTH is the width
of the column. FORMAT is a function that is called with one
argument, the repository identification (usually its basename), and
with ‘default-directory’ bound to the toplevel of its working tree.
It has to return a string to be inserted or nil. PROPS is an alist
that supports the keys ‘:right-align’ and ‘:pad-right’.
-- Function: magit-insert-submodules
Insert sections for all submodules. For each section insert the
path, the branch, and the output of ‘git describe --tags’, or,
failing that, the abbreviated HEAD commit hash.
Press ‘RET’ on such a submodule section to show its own status
buffer. Press ‘RET’ on the "Modules" section to display a list of
submodules in a separate buffer. This shows additional information
not displayed in the super-repository’s status buffer.
File: magit.info, Node: Submodule Popup, Prev: Listing Submodules, Up: Submodules
8.3.2 Submodule Popup
---------------------
‘o’ (‘magit-submodule-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
Some of the below commands default to act on the modules that are
selected using the region. For brevity their description talk about
"the selected modules", but if no modules are selected, then they act on
the current module instead, or if point isn’t on a module, then the read
a single module to act on. With a prefix argument these commands ignore
the selection and the current module and instead act on all suitable
modules.
‘o a’ (‘magit-submodule-add’)
This commands adds the repository at URL as a module. Optional
PATH is the path to the module relative to the root of the
super-project. If it is nil then the path is determined based on
URL.
‘o r’ (‘magit-submodule-register’)
This command registers the selected modules by copying their urls
from ".gitmodules" to "$GIT_DIR/config". These values can then be
edited before running ‘magit-submodule-populate’. If you don’t
need to edit any urls, then use the latter directly.
‘o p’ (‘magit-submodule-populate’)
This command creates the working directory or directories of the
selected modules, checking out the recorded commits.
‘o u’ (‘magit-submodule-update’)
This command updates the selected modules checking out the recorded
commits.
‘o s’ (‘magit-submodule-synchronize’)
This command synchronizes the urls of the selected modules, copying
the values from ".gitmodules" to the ".git/config" of the
super-project as well those of the modules.
‘o d’ (‘magit-submodule-unpopulate’)
This command removes the working directory of the selected modules.
‘o l’ (‘magit-list-submodules’)
This command displays a list of the current repository’s modules.
‘o f’ (‘magit-fetch-modules’)
This command fetches all modules.
Option ‘magit-fetch-modules-jobs’ controls how many submodules are
being fetched in parallel. Also fetch the super-repository,
because ‘git fetch’ does not support not doing that. With a prefix
argument fetch all remotes.
File: magit.info, Node: Subtree, Next: Worktree, Prev: Submodules, Up: Miscellaneous
8.4 Subtree
===========
Also see *note (gitman)git-subtree::.
‘O’ (‘magit-tree-popup’)
This prefix command shows the following suffix commands along with
the appropriate infix arguments in a popup buffer.
Most infix arguments only apply to some of the ‘git subtree’
subcommands. When an argument that does not apply to the invoked
command is set, then it is silently ignored.
When the ‘--prefix’ argument is set in the popup buffer, then that is
used. Otherwise the prefix is read in the minibuffer.
‘O a’ (‘magit-subtree-add’)
Add COMMIT from REPOSITORY as a new subtree at PREFIX.
‘O c’ (‘magit-subtree-add-commit’)
Add COMMIT as a new subtree at PREFIX.
‘O m’ (‘magit-subtree-merge’)
Merge COMMIT into the PREFIX subtree.
‘O f’ (‘magit-subtree-pull’)
Pull COMMIT from REPOSITORY into the PREFIX subtree.
‘O p’ (‘magit-subtree-push’)
Extract the history of the subtree PREFIX and push it to REF on
REPOSITORY.
‘O s’ (‘magit-subtree-split’)
Extract the history of the subtree PREFIX.
File: magit.info, Node: Worktree, Next: Common Commands, Prev: Subtree, Up: Miscellaneous
8.5 Worktree
============
Also see *note (gitman)git-worktree::.
‘%’ (‘magit-worktree-popup’)
This prefix command shows the following suffix commands in a popup
buffer.
‘% b’ (‘magit-worktree-checkout’)
Checkout BRANCH in a new worktree at PATH.
‘% c’ (‘magit-worktree-branch’)
Create a new BRANCH and check it out in a new worktree at PATH.
‘% p’ (‘magit-worktree-checkout-pull-request’)
Create, configure and checkout a new worktree from a pull-request.
This is like ‘magit-checkout-pull-request’ (which see) except that
it also creates a new worktree.
‘% k’ (‘magit-worktree-delete’)
Delete a worktree, defaulting to the worktree at point. The
primary worktree cannot be deleted.
‘% g’ (‘magit-worktree-status’)
Show the status for the worktree at point.
If there is no worktree at point, then read one in the minibuffer.
If the worktree at point is the one whose status is already being
displayed in the current buffer, then show it in Dired instead.
File: magit.info, Node: Common Commands, Next: Wip Modes, Prev: Worktree, Up: Miscellaneous
8.6 Common Commands
===================
These are some of the commands that can be used in all buffers whose
major-modes derive from ‘magit-mode’. There are other common commands
beside the ones below, but these didn’t fit well anywhere else.
‘M-w’ (‘magit-copy-section-value’)
This command saves the value of the current section to the
‘kill-ring’, and, provided that the current section is a commit,
branch, or tag section, it also pushes the (referenced) revision to
the ‘magit-revision-stack’.
When the current section is a branch or a tag, and a prefix
argument is used, then it saves the revision at its tip to the
‘kill-ring’ instead of the reference name.
‘C-w’ (‘magit-copy-buffer-revision’)
This command saves the revision being displayed in the current
buffer to the ‘kill-ring’ and also pushes it to the
‘magit-revision-stack’. It is mainly intended for use in
‘magit-revision-mode’ buffers, the only buffers where it is always
unambiguous exactly which revision should be saved.
Most other Magit buffers usually show more than one revision, in
some way or another, so this command has to select one of them, and
that choice might not always be the one you think would have been
the best pick.
Outside of Magit ‘M-w’ and ‘C-w’ are usually bound to
‘kill-ring-save’ and ‘kill-region’, and these commands would also be
useful in Magit buffers. Therefore when the region is active, then both
of these commands behave like ‘kill-ring-save’ instead of as described
above.
File: magit.info, Node: Wip Modes, Next: Minor Mode for Buffers Visiting Files, Prev: Common Commands, Up: Miscellaneous
8.7 Wip Modes
=============
Git keeps *committed* changes around long enough for users to recover
changes they have accidentally deleted. It does so by not garbage
collecting any committed but no longer referenced objects for a certain
period of time, by default 30 days.
But Git does *not* keep track of *uncommitted* changes in the working
tree and not even the index (the staging area). Because Magit makes it
so convenient to modify uncommitted changes, it also makes it easy to
shoot yourself in the foot in the process.
For that reason Magit provides three global modes that save *tracked*
files to work-in-progress references after or before certain actions.
(Untracked files are never saved and these modes also only work after
the first commit has been created).
Two separate work-in-progress references are used to track the state
of the index and of the working tree: "refs/wip/index/<branchref>" and
"refs/wip/wtree/<branchref>", where ‘<branchref>’ is the full ref of the
current branch, e.g. "refs/heads/master". When the ‘HEAD’ is detached
then "HEAD" is in place of ‘<branchref>’.
Checking out another branch (or detaching ‘HEAD’) causes the use of
different wip refs for subsequent changes, but the old refs are not
deleted.
Creating a commit and then making a change causes the wip refs to be
recreated to fork from the new commit. But the old commits on the wip
refs are not lost. They are still available from the reflog. To make
it easier to see when the fork point of a wip ref was changed, an
additional commit with the message "restart autosaving" is created on it
(‘xxO’ commits below are such boundary commits).
Starting with
BI0---BI1 refs/wip/index/refs/heads/master
/
A---B refs/heads/master
\
BW0---BW1 refs/wip/wtree/refs/heads/master
and committing the staged changes and editing and saving a file would
result in
BI0---BI1 refs/wip/index/refs/heads/master
/
A---B---C refs/heads/master
\ \
\ CW0---CW1 refs/wip/wtree/refs/heads/master
\
BW0---BW1 refs/wip/wtree/refs/heads/master@{2}
The fork-point of the index wip ref is not changed until some change
is being staged. Likewise just checking out a branch or creating a
commit does not change the fork-point of the working tree wip ref. The
fork-points are not adjusted until there actually is a change that
should be committed to the respective wip ref.
To view the log for a branch and its wip refs use the commands
‘magit-wip-log’ and ‘magit-wip-log-current’. You should use ‘--graph’
when using these commands. Alternatively you can use the reflog to show
all commits that ever existed on a wip ref. You can then recover lost
changes from the commits shown in the log or reflog.
-- Command: magit-wip-log
This command shows the log for a branch and its wip refs.
With a negative prefix argument only the worktree wip ref is shown.
The absolute numeric value of the prefix argument controls how many
"branches" of each wip ref are shown.
-- Command: magit-wip-log-current
This command shows the log for the current branch and its wip refs.
With a negative prefix argument only the worktree wip ref is shown.
The absolute numeric value of the prefix argument controls how many
"branches" of each wip ref are shown.
There exists a total of three global modes that save to the wip refs,
which might seem excessive, but allows fine tuning of when exactly
changes are being committed to the wip refs. Enabling all modes makes
it less likely that a change slips through the cracks.
Setting the following variables directly does not take effect; either
customize them or call the respective mode function.
-- User Option: magit-wip-after-save-mode
When this mode is enabled, then saving a buffer that visits a file
tracked in a Git repository causes its current state to be
committed to the working tree wip ref for the current branch.
-- User Option: magit-wip-after-apply-mode
When this mode is enabled, then applying (i.e. staging, unstaging,
discarding, reversing, and regularly applying) a change to a file
tracked in a Git repository causes its current state to be
committed to the index and/or working tree wip refs for the current
branch.
If you only ever edit files using Emacs and only ever interact with
Git using Magit, then the above two modes should be enough to protect
each and every change from accidental loss. In practice nobody does
that. So an additional mode exists that does commit to the wip refs
before making changes that could cause the loss of earlier changes.
-- User Option: magit-wip-before-change-mode
When this mode is enabled, then certain commands commit the
existing changes to the files they are about to make changes to.
Note that even if you enable all three modes this won’t give you
perfect protection. The most likely scenario for losing changes despite
the use of these modes is making a change outside Emacs and then
destroying it also outside Emacs. In such a scenario, Magit, being an
Emacs package, didn’t get the opportunity to keep you from shooting
yourself in the foot.
When you are unsure whether Magit did commit a change to the wip
refs, then you can explicitly request that all changes to all tracked
files are being committed.
‘M-x magit-wip-commit’ (‘magit-wip-commit’)
This command commits all changes to all tracked files to the index
and working tree work-in-progress refs. Like the modes described
above, it does not commit untracked files, but it does check all
tracked files for changes. Use this command when you suspect that
the modes might have overlooked a change made outside Emacs/Magit.
-- User Option: magit-wip-after-save-local-mode-lighter
Mode-line lighter for ‘magit-wip-after-save-local-mode’.
-- User Option: magit-wip-after-apply-mode-lighter
Mode-line lighter for ‘magit-wip-after-apply-mode’.
-- User Option: magit-wip-before-change-mode-lighter
Mode-line lighter for ‘magit-wip-before-change-mode’.
-- User Option: magit-wip-namespace
The namespace used for work-in-progress refs. It has to end with a
slash. The wip refs are named "<namespace>index/<branchref>" and
"<namespace>wtree/<branchref>". When snapshots are created while
the ‘HEAD’ is detached then "HEAD" is used in place of
‘<branchref>’.
File: magit.info, Node: Minor Mode for Buffers Visiting Files, Next: Minor Mode for Buffers Visiting Blobs, Prev: Wip Modes, Up: Miscellaneous
8.8 Minor Mode for Buffers Visiting Files
=========================================
The ‘magit-file-mode’ enables certain Magit features in file-visiting
buffers belonging to a Git repository. It should be enabled globally
using ‘global-magit-file-mode’. Currently this mode only establishes a
few key bindings, but this might be extended in the future.
-- User Option: magit-file-mode
Whether to establish certain Magit key bindings in all
file-visiting buffers belonging to a Git repository. This
establishes the bindings suggested in *note Getting Started:: (but
only for file-visiting buffers), and additionally binds ‘C-c M-g’
to ‘magit-file-popup’.
‘C-c M-g’ (‘magit-file-popup’)
This prefix command shows a popup buffer featuring suffix commands
that operate on the file being visited in the current buffer.
‘C-c M-g s’ (‘magit-stage-file’)
Stage all changes to the file being visited in the current buffer.
‘C-c M-g u’ (‘magit-unstage-file’)
Unstage all changes to the file being visited in the current
buffer.
‘C-c M-g c’ (‘magit-commit-popup’)
This prefix command shows suffix commands along with the
appropriate infix arguments in a popup buffer. See *note
Initiating a Commit::.
‘C-c M-g D’ (‘magit-diff-buffer-file-popup’)
This prefix command shows the same suffix commands and infix
arguments in a popup buffer as ‘magit-diff-popup’. But this
variant has to be called from a file-visiting buffer and the
visited file is automatically used in the popup to limit the diff
to that file.
‘C-c M-g d’ (‘magit-diff-buffer-file’)
This command shows the diff for the file of blob that the current
buffer visits.
-- User Option: magit-diff-buffer-file-locked
This option controls whether ‘magit-diff-buffer-file’ uses a
dedicated buffer. See *note Modes and Buffers::.
‘C-c M-g L’ (‘magit-log-buffer-file-popup’)
This prefix command shows the same suffix commands and infix
arguments in a popup buffer as ‘magit-log-popup’. But this variant
has to be called from a file-visiting buffer and the visited file
is automatically used in the popup to limit the log to that file.
‘C-c M-g l’ (‘magit-log-buffer-file’)
This command shows the log for the file of blob that the current
buffer visits. Renames are followed when a prefix argument is used
or when ‘--follow’ is part of ‘magit-log-arguments’. When the
region is active, the log is restricted to the selected line range.
‘C-c M-g t’ (‘magit-log-trace-definition’)
This command shows the log for the definition at point.
-- User Option: magit-log-buffer-file-locked
This option controls whether ‘magit-log-buffer-file’ uses a
dedicated buffer. See *note Modes and Buffers::.
‘C-c M-g B’ (‘magit-blame-popup’)
This prefix command shows all blaming suffix command along with the
appropriate infix arguments in a popup buffer. See *note
Blaming::.
‘C-c M-g b’ (‘magit-blame’)
This command shows for each line the revision in which it was
added.
‘C-c M-g r’ (‘magit-blame-removal’)
This command shows for each line the revision in which it was
removed. This command is only available in blob-visiting buffers.
‘C-c M-g f’ (‘magit-blame-reverse’)
This command shows for each line the last revision in which it
still exists. This command is only available in blob-visiting
buffers.
‘C-c M-g e’ (‘magit-edit-line-commit’)
This command makes the commit editable that added the current line.
With a prefix argument it makes the commit editable that removes
the line, if any. The commit is determined using ‘git blame’ and
made editable using ‘git rebase --interactive’ if it is reachable
from ‘HEAD’, or by checking out the commit (or a branch that points
at it) otherwise.
‘C-c M-g p’ (‘magit-blob-previous’)
Visit the previous blob which modified the current file.
There are a few additional commands that operate on a single file but
are not available from the file popup by default:
-- Command: magit-file-rename
This command renames a file read from the user.
-- Command: magit-file-delete
This command deletes a file read from the user.
-- Command: magit-file-untrack
This command untracks a file read from the user.
-- Command: magit-file-checkout
This command updates a file in the working tree and index to the
contents from a revision. Both the revision and file are read from
the user.
You could add them to the popup like so:
(magit-define-popup-action 'magit-file-popup
?R "Rename file" 'magit-file-rename)
(magit-define-popup-action 'magit-file-popup
?K "Delete file" 'magit-file-delete)
(magit-define-popup-action 'magit-file-popup
?U "Untrack file" 'magit-file-untrack)
(magit-define-popup-action 'magit-file-popup
?C "Checkout file" 'magit-file-checkout)
File: magit.info, Node: Minor Mode for Buffers Visiting Blobs, Prev: Minor Mode for Buffers Visiting Files, Up: Miscellaneous
8.9 Minor Mode for Buffers Visiting Blobs
=========================================
The ‘magit-blob-mode’ enables certain Magit features in blob-visiting
buffers. Such buffers can be created using ‘magit-find-file’ and some
of the commands mentioned below, which also take care of turning on this
minor mode. Currently this mode only establishes a few key bindings,
but this might be extended.
‘p’ (‘magit-blob-previous’)
Visit the previous blob which modified the current file.
‘n’ (‘magit-blob-next’)
Visit the next blob which modified the current file.
‘q’ (‘magit-kill-this-buffer’)
Kill the current buffer.
File: magit.info, Node: Customizing, Next: Plumbing, Prev: Miscellaneous, Up: Top
9 Customizing
*************
Both Git and Emacs are highly customizable. Magit is both a Git
porcelain as well as an Emacs package, so it makes sense to customize it
using both Git variables as well as Emacs options. However this
flexibility doesn’t come without problems, including but not limited to
the following.
• Some Git variables automatically have an effect in Magit without
requiring any explicit support. Sometimes that is desirable - in
other cases, it breaks Magit.
When a certain Git setting breaks Magit but you want to keep using
that setting on the command line, then that can be accomplished by
overriding the value for Magit only by appending something like
‘("-c" "some.variable=compatible-value")’ to
‘magit-git-global-arguments’.
• Certain settings like ‘fetch.prune=true’ are respected by Magit
commands (because they simply call the respective Git command) but
their value is not reflected in the respective popup buffers. In
this case the ‘--prune’ argument in ‘magit-fetch-popup’ might be
active or inactive depending on the value of
‘magit-fetch-arguments’ only, but that doesn’t keep the Git
variable from being honored by the suffix commands anyway. So
pruning might happen despite the ‘--prune’ arguments being
displayed in a way that seems to indicate that no pruning will
happen.
I intend to address these and similar issues in a future release.
* Menu:
* Per-Repository Configuration::
* Essential Settings::
File: magit.info, Node: Per-Repository Configuration, Next: Essential Settings, Up: Customizing
9.1 Per-Repository Configuration
================================
Magit can be configured on a per-repository level using both Git
variables as well as Emacs options.
To set a Git variable for one repository only, simply set it in
‘/path/to/repo/.git/config’ instead of ‘$HOME/.gitconfig’ or
‘/etc/gitconfig’. See *note (gitman)git-config::.
Similarly, Emacs options can be set for one repository only by
editing ‘/path/to/repo/.dir-locals.el’. See *note (emacs)Directory
Variables::. For example to disable automatic refreshes of
file-visiting buffers in just one huge repository use this:
• ‘/path/to/huge/repo/.dir-locals.el’
((nil . ((magit-refresh-buffers . nil))))
If you want to apply the same settings to several, but not all,
repositories then keeping the repository-local config files in sync
would quickly become annoying. To avoid that you can create config
files for certain classes of repositories (e.g. "huge repositories")
and then include those files in the per-repository config files. For
example:
• ‘/path/to/huge/repo/.git/config’
[include]
path = /path/to/huge-gitconfig
• ‘/path/to/huge-gitconfig’
[status]
showUntrackedFiles = no
• ‘$HOME/.emacs.d/init.el’
(dir-locals-set-class-variables 'huge-git-repository
'((nil . ((magit-refresh-buffers . nil)))))
(dir-locals-set-directory-class
"/path/to/huge/repo/" 'huge-git-repository)
File: magit.info, Node: Essential Settings, Prev: Per-Repository Configuration, Up: Customizing
9.2 Essential Settings
======================
The next two sections list and discuss several variables that many users
might want to customize, for safety and/or performance reasons.
* Menu:
* Safety::
* Performance::
File: magit.info, Node: Safety, Next: Performance, Up: Essential Settings
9.2.1 Safety
------------
This section discusses various variables that you might want to change
(or *not* change) for safety reasons.
Git keeps *committed* changes around long enough for users to recover
changes they have accidentally been deleted. It does not do the same
for *uncommitted* changes in the working tree and not even the index
(the staging area). Because Magit makes it so easy to modify
uncommitted changes, it also makes it easy to shoot yourself in the foot
in the process. For that reason Magit provides three global modes that
save *tracked* files to work-in-progress references after or before
certain actions. See *note Wip Modes::.
These modes are not enabled by default because of performance
concerns. Instead a lot of potentially destructive commands require
confirmation every time they are used. In many cases this can be
disabled by adding a symbol to ‘magit-no-confirm’ (see *note Completion
and Confirmation::). If you enable the various wip modes then you
should add ‘safe-with-wip’ to this list.
Similarly it isn’t necessary to require confirmation before moving a
file to the system trash - if you trashed a file by mistake then you can
recover it from the there. Option ‘magit-delete-by-moving-to-trash’
controls whether the system trash is used, which is the case by default.
Nevertheless, ‘trash’ isn’t a member of ‘magit-no-confirm’ - you might
want to change that.
By default buffers visiting files are automatically reverted when the
visited file changes on disk. This isn’t as risky as it might seem, but
to make an informed decision you should see *note Risk of Reverting
Automatically::.
File: magit.info, Node: Performance, Prev: Safety, Up: Essential Settings
9.2.2 Performance
-----------------
After Magit has run ‘git’ for side-effects, it also refreshes the
current Magit buffer and the respective status buffer. This is
necessary because otherwise outdated information might be displayed
without the user noticing. Magit buffers are updated by recreating
their content from scratch, which makes updating simpler and less
error-prone, but also more costly. Keeping it simple and just
re-creating everything from scratch is an old design decision and
departing from that will require major refactoring.
I plan to do that in time for the next major release. I also intend
to create logs and diffs asynchronously, which should also help a lot
but also requires major refactoring.
Meanwhile you can tell Magit to only automatically refresh the
current Magit buffer, but not the status buffer. If you do that, then
the status buffer is only refreshed automatically if it is the current
buffer.
(setq magit-refresh-status-buffer nil)
You should also check whether any third-party packages have added
anything to ‘magit-refresh-buffer-hook’, ‘magit-status-refresh-hook’,
‘magit-pre-refresh-hook’, and ‘magit-post-refresh-hook’. If so, then
check whether those additions impact performance significantly. Setting
‘magit-refresh-verbose’ and then inspecting the output in the
‘*Messages*’ buffer, should help doing so.
Magit also reverts buffers for visited files located inside the
current repository when the visited file changes on disk. That is
implemented on top of ‘auto-revert-mode’ from the built-in library
‘autorevert’. To figure out whether that impacts performance, check
whether performance is significantly worse, when many buffers exist
and/or when some buffers visit files using TRAMP. If so, then this
should help.
(setq auto-revert-buffer-list-filter
'magit-auto-revert-repository-buffers-p)
For alternative approaches see *note Automatic Reverting of
File-Visiting Buffers::.
If you have enabled any features that are disabled by default, then
you should check whether they impact performance significantly. It’s
likely that they were not enabled by default because it is known that
they reduce performance at least in large repositories.
If performance is only slow inside certain unusually large
repositories, then you might want to disable certain features on a
per-repository or per-repository-class basis only. See *note
Per-Repository Configuration::.
* Menu:
* Microsoft Windows Performance::
* MacOS Performance::
Log Performance
...............
When showing logs, Magit limits the number of commits initially shown in
the hope that this avoids unnecessary work. When using ‘--graph’ is
used, then this unfortunately does not have the desired effect for large
histories. Junio, Git’s maintainer, said on the git mailing list
(<http://www.spinics.net/lists/git/msg232230.html>): "‘--graph’ wants to
compute the whole history and the max-count only affects the output
phase after ‘--graph’ does its computation".
In other words, it’s not that Git is slow at outputting the
differences, or that Magit is slow at parsing the output - the problem
is that Git first goes outside and has a smoke.
We actually work around this issue by limiting the number of commits
not only by using ‘-<N>’ but by also using a range. But unfortunately
that’s not always possible.
In repositories with more than a few thousand commits ‘--graph’
should never be a member of ‘magit-log-section-arguments’. That
variable is used in the status buffer which is refreshed every time you
run any Magit command.
Using ‘--color --graph’ is even slower. Magit uses code that is part
of Emacs to turn control characters into faces. That code is pretty
slow and this is quite noticeable when showing a log with many branches
and merges. For that reason ‘--color’ is not enabled by default
anymore. Consider leaving it at that.
Diff Performance
................
If diffs are slow, then consider turning off some optional diff features
by setting all or some of the following variables to ‘nil’:
‘magit-diff-highlight-indentation’, ‘magit-diff-highlight-trailing’,
‘magit-diff-paint-whitespace’, ‘magit-diff-highlight-hunk-body’, and
‘magit-diff-refine-hunk’.
When showing a commit instead of some arbitrary diff, then some
additional information is displayed. Calculating this information can
be quite expensive given certain circumstances. If looking at a commit
using ‘magit-revision-mode’ takes considerably more time than looking at
the same commit in ‘magit-diff-mode’, then consider setting
‘magit-revision-insert-related-refs’ to ‘nil’.
Refs Buffer Performance
.......................
When refreshing the "references buffer" is slow, then that’s usually
because several hundred refs are being displayed. The best way to
address that is to display fewer refs, obviously.
If you are not, or only mildly, interested in seeing the list of
tags, then start by not displaying them:
(remove-hook 'magit-refs-sections-hook 'magit-insert-tags)
Then you should also make sure that the listed remote branches
actually all exist. You can do so by pruning branches which no longer
exist using ‘f-pa’.
Committing Performance
......................
When you initiate a commit, then Magit by default automatically shows a
diff of the changes you are about to commit. For large commits this can
take a long time, which is especially distracting when you are
committing large amounts of generated data which you don’t actually
intend to inspect before committing. This behavior can be turned off
using:
(remove-hook 'server-switch-hook 'magit-commit-diff)
Then you can type ‘C-c C-d’ to show the diff when you actually want
to see it, but only then. Alternatively you can leave the hook alone
and just type ‘C-g’ in those cases when it takes too long to generate
the diff. If you do that, then you will end up with a broken diff
buffer, but doing it this way has the advantage that you usually get to
see the diff, which is useful because it increases the odds that you
spot potential issues.
The Built-In VC Package
.......................
Emacs comes with a version control interface called "VC", see *note
(emacs)Version Control::. It is enabled be default, and if you don’t
use it in addition to Magit, then you should disable it to keep it from
performing unnecessary work:
(setq vc-handled-backends nil)
You can also disable its use for Git but keep using it when using
another version control system:
(setq vc-handled-backends (delq 'Git vc-handled-backends))