Age | Commit message (Collapse) | Author | Files | Lines |
|
While we are at it, rename disk-checkup.nix to btrfs-auto-scrub.nix and
move it into //ops/modules. I originally wanted to have additionally
disk health related services in that module, but the btrfs scrub
functionality is nicely self-contained and reusable, so I think it makes
sense to have this in a more central location.
Change-Id: Iabdd62838eef009540ca71abafd921afda2a9b47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10128
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Network configuration and initrd setup is basically the same as with
edwin, but we are using md for Software RAID this time as well as LVM
over two partitions with LUKS:
- sda2 <-- RAID1 --> sdb2 (boot-raid)
└ boot partition, ext4 (encrypted-container-raid)
- sda3 <-- RAID1 --> sdb3
└ LUKS container
└ Volume Group vgmain
├ Logical Volume vgmain/swap
│ └ swap
└ Logical Volume vgmain/root
└ btrfs
So we no longer rely on btrfs raid1 due to question marks over its
reliability (I personally did not have any problems though). This also
means that we have less LUKS containers we need to unlock when
booting (kind of neglible improvement). The biggest improvement is that
we have redundancy for the swap, so a disk failure shouldn't cause
memory corruption/loss.
Change-Id: I14f065b659857415917d9a60a7ec019e687f8d1c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10127
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I576107047d8213e718e720d3a7a1dcc1dff39122
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10126
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
These settings would also be applied to a machine that'd replace edwin,
so it's useful to have them outside edwin's default.nix.
Change-Id: I4e8f464118a103645e53909a87c6ee4446022fa3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10125
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
nixpkgs changed something in how it deals with configuration of the
package set itself when that is externally instantiated (like in
depot)
It seems like we can work around this mostly by just ... deleting some
code, as all instances of this were for allowing unfree code, which
we've already set on the top-level anyways.
* //users/sterni: fix nixpkgs config assertion to point at
pkgs.config
* //users/wpcarro: disable locate service, which is broken in nixpkgs
Change-Id: Iacf6f1c8fd5b5289e7265e155d74f8269a858ceb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9541
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This mirrors the terminology Haskell uses: quot and rem truncate towards
zero which is also the case for builtins.div. We can give us the option
to introduce Haskell-style int.div and int.mod (to complete the
confusion) which would truncate towards negative infinity.
Change-Id: Ibebb0a01a73c9718cd62121b2fc2a19c3a4be0de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9009
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Only implements the different conversion types from and to ints for now.
Unfortunately very reliant on builtins.{floor,ceil} which can't be
implemented purely except very inefficiently (to my knowledge), so it
only really works for C++ Nix >= 2.4. Tests are thus skipped for
C++ Nix 2.3.
Change-Id: Idcb1a11df11e214cdba3f2a0715472b370daa7dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9008
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
We omit type checks for performance reasons in most places currently, so
the library grouping is important in showing people what to use for what
sort of input. The moved functions make sense to use with floats as
well, so we'll move them to the num library. Some of the remaining
functions could theoretically be adapted and moved, but aren't for now.
Change-Id: Ifdecaa60be594f4438b2a58b9ea6445e2da080e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9007
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This means we can subtitute the base package for my emacs derivation
instead of compiling it from scratch (which is quite slow).
This means I'll be using 29.1-rc1 until
https://github.com/NixOS/nixpkgs/pull/246203 or
https://github.com/NixOS/nixpkgs/pull/247496 are merged which is okay,
as it includes pgtk support.
Change-Id: Ie7cfec1ca0df9974c049be0b00d75f32143ac905
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9065
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This stops it from shadowing org-mode's C-c ! which I wanted to use a
few times, curiously. Surprisingly, this seems to work correctly even
though no special evil binding facilities are involved, i.e. the keys
only work in normal mode.
Change-Id: I184321c1f1b02d1661dc915bb3a384a349a04068
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8928
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I52f97d5f018196b273a1cc08247b5a48a757adbd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8927
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I40452e0a4f7237eb7352fb3f7342a64bf0e37cd2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8841
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
* //ops/modules/depot-inbox: Adapt to upstream option type declaration.
See nixpkgs commit b6ed3b8f402893df91a8e21ce993520301c2f076.
* //ops/machines/sanduny, //users/tazjin/polyanka:
Remove boot.loader.grub.version options (no longer has any effect).
* //users/sterni/emacs: reflect rename emacsPgtk -> emacs-pgtk
* //3p/overlays: update tdlib to match emacs-overlay
* //3p/overlays: give EXWM from depot a separate name
* //users/grfn/system/home: disable Slack support in ntfy
Change-Id: I03bde088bc70e05b23925f244899807210cb7b20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8547
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
/**/ is a nice way to align if statements which doesn't work with
nixpkgs-fmt, since it'll reflow the comment to the line preceding the
if. Consequently, we can delete these comments now.
Change-Id: Ifa5327f846a903e07607b21f8eedbc32fc36f758
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8689
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Eventually, we'll want to replace dump-stream-binary with something more
efficient—given that we have flexi-streams we can use something that
only does matching element types no problem. REDIRECT-STREAM is much
more efficient thanks to using an internal buffer.
streams.lisp gets a new section at the beginning for grouping utilities
that don't have any real (internal) dependencies.
Change-Id: I141cd36440d532131f389be2768fdaa54e7c7218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8583
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Porting over the rest of the decoding (RFC2047) and especially encoding
over to qbase64 is still pending, as it is a little trickier.
Change-Id: Id4740eb074a387aeea2cb94b781e204248530799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8582
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The input adapter streams were input streams yielding either binary or
character data that could be constructed from a variable data source.
The stream would take care not to destroy the underlying data
source (i.e. not close it if it was a stream), so similar to with
FILE-PORTIONs, but simpler.
Unfortunately, the implementation was quite inefficient: They are
ultimately defined in terms of a function that retrieves the next
character in the source. This only allows for an implementation of
READ-CHAR (and READ-BYTE). Thanks to cl/8559, READ-SEQUENCE can be used
on e.g. FILE-PORTION, but this was still negated by a input adapter
based on one—then, READ-SEQUENCE would need to fall back on READ-CHAR or
READ-BYTE again.
Luckily, we can replace BINARY-INPUT-ADAPTER-STREAM and
CHARACTER-INPUT-ADAPTER-STREAM with a much simpler abstraction: Instead
of extra stream classes, we have a function, MAKE-INPUT-ADAPTER, which
returns an appropriate instance of FLEXI-STREAM based on a given source.
This way, the need for a distinction between binary and character input
adapter is eliminated, since FLEXI-STREAMS supports both binary and
character reads (external format is not yet handled, though).
Consequently, the :binary keyword argument to MIME-BODY-STREAM can be
dropped.
flexi-streams provides stream classes for everything except a stream
that doesn't close the underlying one. Since we have already implemented
this in POSITIONED-FLEXI-INPUT-STREAM, we can split this functionality
into a new superclass ADAPTER-FLEXI-INPUT-STREAM.
This change also allows addressing the performance regression
encountered in cl/8559: It seems that flexi-streams performs worse when
we are reading byte by byte or char by char. (After this change mblog is
still two times slower than on r/6150.) By eliminating the adapter
streams, we can start utilizing READ-SEQUENCE via decoding code that
supports it (i.e. qbase64) and bring performance on par with r/6150
again. Surely there are also ways to gain back even more performance
which has to be determined using profiling. Buffering more aggressively
seems like a sure bet, though.
Switching to flexi-streams still seems like a no-brainer, as it allows
us to drop a lot of code that was quite hacky (e.g. DELIMITED-INPUT-
STREAM) and implements en/decoding handling we did not support before,
but would need for improved correctness.
Change-Id: Ie2d1f4e42b47512a5660a1ccc0deeec2bff9788d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8581
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I78eb4a6d21117784d7684e05d4cc92a92e43e482
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8545
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Upstream server no longer answers to git://.
Change-Id: I9c3608222a02f04d1cd77fa15738fa91e0088247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8533
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ib6141a6d905220395d822ac1d8e4f47aa89161a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8425
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I394c48395cdc50bea3747f55d95f169e599018ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8370
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I7cf9681130cc2f99050ebc0c736a4e1387ce8fbc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8350
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I091c0d5decc0a1eb3d24e81b713434ab391c677d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8347
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I4d002c933929508baab12d3802ac67d42813507b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8333
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Starting with 1.18.1 we no longer need to pass an extra flag to work
around the log4j CVE, so baseJvmOpts can be empty.
Change-Id: I6d6c5a366ecbb499b2e3945db81ca0a8b2e2dcbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8332
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: If9f6ee1c49a6c427530e56ceff60a2508f6fd9c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8331
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I5e27eb7cfb87cd20a87aa49af114f43aaadc32d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8330
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I3393c16db76fba839ea72612f54e6a2a72d0b69d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8329
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I6f833c882e6a5428c9bd94951a5ef5b62ca7c6b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8328
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I8b163614b588d1cfb8d758cafb8fb407397a1ef7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8188
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Includes a frontend bug fix and a closure size reduction of the server
application.
Change-Id: I5713a5348281acb7126c1fd85a637a6fff969c98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8187
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I4d141e0d911157ae17f12066b859297836d4858b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7897
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Icfd167e608955ec33367ca51dd8ae1d8d2740b4d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7837
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
The commit graph can be quite slow for repositories like nixpkgs, so it
is disabled there. For this we refactor the module a bit, allowing us to
set arbitrary cgit settings for repositories. This feature can also
handle all instances of defaultBranch now.
Change-Id: I22e44b7398d2692e8cc16555fb5203ad6a7a69a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7672
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
BQNLIBS dependency also needs to be provided in the derivation running
all solutions.
Change-Id: I704369127ab92a52c7e4b21de8b7982fb8328f9d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7662
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Didn't end up happening due to a lack of motivation. Will try to finish
the BQN AoC still, though.
Change-Id: Ib296aec9f3cfeef57c79a9ba09fc664c1a19dcff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7661
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Another approach for figuring out the SNAFU digits in k:
https://github.com/leahneukirchen/adventofcode2022/blob/master/day25.k
Change-Id: Iddf424aff8fcac176109fd35ef44bdd875302adc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7647
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This one is not finished yet, but needs to move of this laptop by ways
of git.
Change-Id: I2c8c0a7b581a654f7cfab92dd21ced82a14c5f42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7616
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I50eeef285a9f9cb5ad0a7f99105dfbf571ac9b38
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7615
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
I have no jira account anymore, so this can be cleaned up.
Change-Id: Iac33832f3933a02ed2ceb0f21ace30be864aba6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7614
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I1e2dd583c5f782afb679beeb43ceffa0cbc5c59e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7607
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Part 2 is pretty slow, since we just reuse our fast solution for part 1.
This means we have to check 4000000 which could be reduced a bit by
using a loop. It is tolerably slow, so whatever. (Overall this problem
would have been more fun if the space to check was smaller.)
Change-Id: I1203330fe0364894cfe0318376e583868937b5bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7603
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This solution feels very un-BQN-esque, but I could not get it to work by
doing arithmetic operations on an array of indices for any input but the
example one. It's still decently fact considering that we create so many
intermediate arrays at each step.
Change-Id: I883409b4d99d4954312df9b9a9ffc568c39f7726
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7602
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I1504cd5e443ff0b28c2d97ae357e5d92c88bba4d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7601
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ib80fe824341964f46a45599c18fa00635ba02aaf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7600
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
* //users/grfn/modules/games: StoneSense requires DFHack to be enabled
* //users/grfn/system/iso: gtk needs cairo with xlibs
* //users: deal with emacs-overlay attribute renames
* //3p/overlays: downgrade sbcl to workaround lisp-binary compilation
failure
Change-Id: I1573280a923e5021ef399734cb5519b37e72c670
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7563
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I401ba09198d447628fa76d811fd4fe780baa8240
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7586
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I374373e86e78277cf2caf8509c477a508a2ceba1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7584
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: If9c510e3530ecc1acafa1d708eacf64eb1132db7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7583
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: Ic536908bad5bb4af860ec53bd585ed74af3117af
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7557
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|