| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current implementation of nix_eq will force one level of thunks
and then switch to the (non-forcing) rust Eq::eq() method. This
gives incorrect results for lists-of-thunks.
This commit changes nix_eq() to be recursive.
A regression test (which fails prior to this commit) is included.
This fix also causes nix_tests/eval-okay-fromjson.nix to pass, so it
is moved out of notyetpassing.
Change-Id: I655fd7a5294208a7b39df8e2c3c12a8b9768292f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7142
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
We're getting close to the finish line, folks.
I went through the list of builtins and there are only 33 that
remain unimplemented. I've marked them, and indicated which are
ready to be implemented vs which are waiting for other things.
We can delete this column from the table once everything is
implemented.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Idfaef93283536288b12e59aef5c3e1cd139bd133
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7140
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
I believe that the currentTime, findFile, hashFile, pathExists,
readDir, path (unless ?sha256), and readFile builtins are impure.
This commit marks them as such in docs/builtins.md.
Change-Id: Ib1b59fe643dde73cb2b00050b4ef9d3401ad22eb
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7139
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: I59a0756940d1e5360a2ab4e886cf0bc9af7b8901
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7133
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This is a bit tricky because the comparator can throw errors, so we
need to propagate them out if they exist and try to avoid sorting
forever by returning a reasonable ordering in this case (as
short-circuiting is not available).
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Icae1d30f43ec1ae64b2ba51e73ee467605686792
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7072
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Lists are compared lexicographically in C++ nix as of [0], and our
updated nix test suites depend on this. This implements comparison of
list values in `Value::nix_cmp` using a very similar algorithm to what
C++ does - similarly to there, this requires passing in the VM so we can
force thunks in the list elements as we go.
[0]: https://github.com/NixOS/nix/commit/09471d2680292af48b2788108de56a8da755d661#
Change-Id: I5d8bb07f90647a1fec83f775243e21af856afbb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7070
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
CL/7034 looks great, except that for a length-N target string it
will perform N deep copies of each of the from and to-lists. Let's
use references instead of clones.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Icd341213a9f0e728f9c8453cec6d23af5e1dea91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7095
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: I93dcdaeb101364ee2273bcaeb19acb57cf6b9e7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7034
Autosubmit: j4m3s <james.landrein@gmail.com>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
I assumed that AttrsRep::KV represented attrsets with a single
attribute as a Key-Value pair. That is not the case. Let's warn
other people about this.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ie3d2765fcc1ab705c153ab94ffe77bbd6d4ab39e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7093
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I460230863de853ca5248733bc977d4780b216f36
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7096
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Rustc uses wasm32-unknown-unknown, which is rejected by config.sub,
for wasm-in-the-browser environments. Rustc should be using
wasm32-unknown-none, which config.sub accepts. Hopefully the rustc
people will change their triple before stabilising this triple. In
the meantime, we fix it here in order to unbreak tvixbolt.
https://doc.rust-lang.org/beta/nightly-rustc/rustc_target/spec/wasm32_unknown_unknown/index.html
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I941fd8d6f3db4e249901772fd79321ad88cd9cc6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7107
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This commit contains two search-and-replace renames which are broken
out from I04131501029772f30e28da8281d864427685097f in order to
reduce the noise in that CL:
- `is_thunk -> is_suspended_thunk`, since there are now
OpThunkClosure and OpThunkSuspended
- `compile_lambda_or_thunk` -> `compile_lambda_or_suspension`
Change-Id: I7cc5bbb75ef6605e3428c7be27e812f41a10c127
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7037
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
CL/6867 added support for builtins.import, which required a cyclic
reference import->globals->builtins->import. This was implemented
using a RefCell, which makes it possible to mutate the builtins
during evaluation. The commit message for CL/6867 expressed a
desire to eliminate this possibility:
This opens up a potentially dangerous footgun in which we could
mutate the builtins at runtime leading to different compiler
invocations seeing different builtins, so it'd be nice to have
some kind of "finalised" status for them or some such, but I'm not
sure how to represent that atm.
This CL replaces the RefCell with Rc::new_cyclic(), making the
globals/builtins immutable once again. At VM runtime (once opcodes
start executing) everything is the same as before this CL, except
that the Rc<RefCell<>> introduced by CL/6867 is turned into an
rc::Weak<>.
The function passed to Rc::new_cyclic works very similarly to
overlays in nixpkgs: a function takes its own result as an argument.
However instead of laziness "breaking the cycle", Rust's
Rc::new_cyclic() instead uses an rc::Weak. This is done to prevent
memory leaks rather than divergence.
This CL also resolves the following TODO from CL/6867:
// TODO: encapsulate this import weirdness in builtins
The main disadvantage of this CL is the fact that the VM now must
ensure that it holds a strong reference to the globals while a
program is executing; failure to do so will cause a panic when the
weak reference in the builtins is upgrade()d.
In theory it should be possible to create strong reference cycles
the same way Rc::new_cyclic() creates weak cycles, but these cycles
would cause a permanent memory leak -- without either an rc::Weak or
RefCell there is no way to break the cycle. At some point we will
have to implement some form of cycle collection; whatever library we
choose for that purpose is likely to provide an "immutable strong
reference cycle" primitive similar to Rc::new_cyclic(), and we
should be able to simply drop it in.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I34bb5821628eb97e426bdb880b02e2097402adb7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7097
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This adds a comment noting that StackIdx is an offset relative to
the base of the current CallFrame, whereas UpvalueIdx is an absolute
index into the upvalues array.
It also removes the confusing mention of StackIdx in the descriptive
comment for LocalIdx. They index into totally different structures;
one exists at runtime and the other exists at compile time.
Change-Id: Ib932b1b0679734c15001e8c5c95a08293fa016b4
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7017
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This adds a function NixList::force_elements() which forces each
element of the list shallowly. This behavior is needed for
`builtins.replaceStrings`, and probably a few other builtins as
well.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I3f0681acbbfe50e781b5f07b6a441647f5e6f8da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7094
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Unfortunately we have to mangle test case filenames into rust-valid
symbols, since test-generator doesn't use `r#"..."` (deliberately?).
This means that when a test fails, there's nothing on the console
you can copy-and-paste in order to view/edit the code of the failing
test case.
This commit (partially) fixes it by including the unmangled name in
the panic!() string. However failures due to panic!()s inside the
vm (including deliberate panics due to panic!()-debugging) still
won't display an unmangled filename.
Maybe we should reconsider the use of test-generator?
Change-Id: I2208a859ffab1264f17f48fd303ff5e19675967e
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7092
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I4e6c4f96f6f5097a5c637eb3dbbd7bb8b34b7d52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7032
Autosubmit: j4m3s <james.landrein@gmail.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Rather than implementing all of the interesting semantics of value
comparison with a macro bound to the VM, implement the bulk of the logic
with a method on Value itself that returns an Ordering, and then use the
macro to implement the comparison against that Ordering. This has no
functional change, but paves the way to implementing lexicographic
comparison of list values, which is supported in the latest version of
upstream nix.
Change-Id: I8af1a020b41577021af5939f5edc160c407d4a9e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7069
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
I played around a little bit with doing this in-place, but ended up
going with this perhaps slightly clone-heavy approach for now because
ideally most clones on Value are cheap - but later we should benchmark
alternate approaches that get to reuse allocations better if necessary
or possible.
Change-Id: If998eb2056cedefdf2fb480b0568ac8329ccfc44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7068
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
The last bump in langVersion (5->6) in C++ Nix was due to making lists
comparable (commit `09471d2680292af48b2788108de56a8da755d661`), which
we support in Tvix with cl/7070.
Change-Id: Id3beed5150b8fb6e0a46a4d1b7e3942022a65346
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7074
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This commit implements builtins.currentSystem, by capturing the
cargo environment variable `TARGET` and exposing it to rustc as
`TVIX_CURRENT_SYSTEM` so it can be inserted into the source code
using `env!()`.
The resulting value needs to be massaged a bit, since it is an "LLVM
triple". The current code should work for all the platforms for
which cppnix works (thanks qyliss for generating the list!). It
does *not* reject all of the triples that cppnix's configure.ac
rejects -- it is much more forgiving. We can tighten this up in a
future commit.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I947f504b2af5a7fee8cf0cb301421d2fc9174ce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6986
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I3e0aa017a7100cbeb86d2e5747471b36affcc102
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7038
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Since we push arguments onto a stack when calling multi-argument
functions, we actually were ending up calling `call_with` with the
arguments in the *reverse order* - we patched around this by passing the
arguments in the reverse order for `foldl'`, but it makes more sense to
have them just be the order that the function would be called with in
user surface code instead.
Change-Id: Ifddb98f46970ac89872383709c3ce758dc965c65
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7067
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
When compiling a lambda, take the name of the outer slot (if
available) and store it as the name on the lambda.
These names are then shown in the observer, and nowhere else (so far).
It is of course common for these things to thread through many
different context levels (e.g. `f = a: b: c: ...`), in this setup only
the outermost closure or thunk gains the name, but it's better than
nothing.
Change-Id: I681ba74e624f2b9e7a147144a27acf364fe6ccc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7065
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: I3898284bc4871e5483ead0c27e0f2832d66f2b29
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7061
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
There are some rare scope cases with deferred access where this
doesn't behave correctly otherwise.
Change-Id: I6c774f5e62c1cb50b598026c54727017a52cd22d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7064
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The warning needs to consider whether it is occuring inside of a
thunk, i.e. the dynamic ancestry chain of lambda contexts must be
inspected and not just the current scope.
Change-Id: I5cf5482d67a8bbb9f03b0ecee7a62f58754f8e59
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7063
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This check is now actually simply equivalent to checking whether the
target has been initialised or not.
Change-Id: I30660d11073ba313358f3a64234a90ed81abf74c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7062
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
These are builtins which can be basically implemented as the identity
function from the perspective of pure evaluation, and which help us
get closer to evaluating nixpkgs.
For now, builtins added here will be "usable" and just emit a warning
about not being implemented yet.
Change-Id: I0fce94677f01c98c0392aeefb7ab353c7dc7ec82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7060
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Checking the computed depth and stack slot against the computed depth
and stack slot is equivalent to just checking the indices into the
locals vector against each other (i.e. "is the slot we're compiling
into the slot we're accessing?")
Change-Id: Ie85a68df073e3b2e3d9aba7fe8634c48eada81fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7059
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
When capturing an upvalue, return a detailed TvixBug error that
contains metadata about what exactly was missing.
This particular thing helps with debugging some scope issues we still
seem to have.
Change-Id: I1089a1df4b3bbc63411a4907c3641a5dc3fad984
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7058
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Using the same method as in Thunk::deep_force, detect cycles when
printing values by maintaining a set of already seen thunks.
With this, display of infinite values matches that of Nix:
> nix-instantiate --eval --strict -E 'let as = { x = 123; y = as; }; in as'
{ x = 123; y = { x = 123; y = <CYCLE>; }; }
> tvix-eval -E 'let as = { x = 123; y = as; }; in as'
=> { x = 123; y = { x = 123; y = <CYCLE>; }; } :: set
Change-Id: I007b918d5131d82c28884e46e46ff365ef691aa8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7056
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This can be raised in cases where some panics lurk (e.g. indexed
accesses).
Change-Id: I93f4d60568277e9c5635aa52f378645626d68c5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7057
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Note that this test (ironically) fails if the observer is used (e.g.
with --trace-runtime), but that's a separate issue.
Change-Id: I952eaeac8b5a7acce9c66cd4744ec570280748e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7055
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This is done via a new `deepForce` function on Value. Since values can
be cyclical (for example, see the test-case), we need to do some extra
work to avoid RefCell borrow errors if we ever hit a graph cycle:
While deep-forcing values, we keep a set of thunks that we have
already seen and avoid doing any work on the same thunk twice. The set
is encapsulated in a separate type to stop potentially invalid
pointers from leaking out.
Finally, since deep_force is conceptually similar to
`VM::force_for_output` (but more suited to usage in eval since it
doesn't clone the values) this removes the latter, replacing it with
the former.
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Iefddefcf09fae3b6a4d161a5873febcff54b9157
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7000
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
When forcing thunks in `force_with_output`, the call stack of the VM
is actually empty (as the calls are synthetic and no longer part of
the evaluation of the top-level expression).
This means that Tvix crashed when constructing error spans for the
`fallible` macro, as the assumption of there being an enclosing span
was violated.
To work around this, we instead pass the span for the whole top-level
expression to force_for_output and set this as the span for the
enclosing error chain. Existing output logic will already avoid
printing the entire expression as an error span.
This fixes b/213.
Change-Id: I93978e0deaf5bcb0f47a6fa95b3f5bebef5bad4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7052
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Failures to resolve a nix search path lookup in angle brackets can be
caught using tryEval (if it reaches the runtime). Resolving relative
paths (either to the current directory or the current user's home) can
never be caught, even if they happen inside a thunk at runtime (which is
currently the case for home-relative paths).
Change-Id: I7f73221df66d82a381dd4063358906257826995a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7025
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Adding these to the C++ Nix CI ensures that it is possible for the
tests in that directory to pass at all. Mainly this would catch
situations like fixed in a previous CL when moving the tests around
would break them so that they wouldn't even pass in C++ Nix.
For this to work, we need to track skips by basename to be
directory-independent (assuming that every skipped test name is unique
is hopefully okay).
Change-Id: If6cb63ebdef0fc19b082b6a04e79ada2e47c658e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7048
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: Iebda5e0d99925a0a8c1d6ae1d7a35397d127bf31
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7047
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
cl/7036 moved these paths around, but neglected to update the relative
paths they contain. Without these updated, they will never start
passing!
Change-Id: Ib16468611af59729883e501be8486f43d850fd58
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7046
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
eval-okay-eq.nix is actually an ancient test case that used the ATerm
syntax for the test result. It was disabled for a while, since the
behavior got reverted for a bit, but works on any reasonably modern
Nix implementation. This change matches my [C++ Nix PR].
[C++ Nix PR]: https://github.com/NixOS/nix/pull/7196
Change-Id: I602fd7c83a0bc104ab502c8b6a74e4591272be1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7045
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: Ibdcaa165024584370ce9578e67985a3526e44f77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7044
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
The language test suite actually doesn't require flakes and the
new features are mostly sensible (added builtins) as well as some
tests for regressions the C++ implementation experienced.
The path interpolation test is not included in this update because there
is no way to construct an location-independent .exp file for it (the C++
repo also doesn't have one). We may still want to implement that feature
eventually (in case rnix adds support for it).
The C++ Nix revision used is ac0fb38e8a5a25a84fa17704bd31b453211263eb.
Change-Id: I75f1e780ddeeee6f6b1f28cf3c66c288dca2c20c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7043
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Since cl/7036 we have a mechanism for dealing with the nix_tests we do
not pass yet.
Change-Id: I246c52963ae7f2500253f4035a77d7006dd35307
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7049
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Reimplement the test discovery of the lang tests script in Nix which
allows for a more flexible skipping logic that can e.g. react to the C++
Nix version used. This allows us to run the test suite against both
C++ Nix 2.3 and the latest C++ Nix version 2.11. The latter is mainly
useful, so we can implement newer Nix features and still verify them
against the C++ implementation.
Change-Id: I30c802844133b86b5e49f5e4f4fefacdb6215e0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7042
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
It is helpful to be able to use the test suite as a regression test:
make a change to the compiler/vm, re-run the tests, and if there are
any failures you know it's your fault.
Right now we can't do that, because the expected-to-fail tests are
mixed in with the expected-to-pass tests. So we can't use them as a
regression test.
Change-Id: Ied606882b9835a7effd7e75bfcf3e5f827e0a2c8
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7036
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This commit deduplicates the Thunk-like functionality from Closure
and unifies it with Thunk.
Specifically, we now have one and only one way of breaking reference
cycles in the Value-graph: Thunk. No other variant contains a
RefCell. This should make it easier to reason about the behavior of
the VM. InnerClosure and UpvaluesCarrier are no longer necessary.
This refactoring allowed an improvement in code generation:
`Rc<RefCell<>>`s are now created only for closures which do not have
self-references or deferred upvalues, instead of for all closures.
OpClosure has been split into two separate opcodes:
- OpClosure creates non-recursive closures with no deferred
upvalues. The VM will not create an `Rc<RefCell<>>` when executing
this instruction.
- OpThunkClosure is used for closures with self-references or
deferred upvalues. The VM will create a Thunk when executing this
opcode, but the Thunk will start out already in the
`ThunkRepr::Evaluated` state, rather than in the
`ThunkRepr::Suspeneded` state.
To avoid confusion, OpThunk has been renamed OpThunkSuspended.
Thanks to @sterni for suggesting that all this could be done without
adding an additional variant to ThunkRepr. This does however mean
that there will be mutating accesses to `ThunkRepr::Evaluated`,
which was not previously the case. The field `is_finalised:bool`
has been added to `Closure` to ensure that these mutating accesses
are performed only on finalised Closures. Both the check and the
field are present only if `#[cfg(debug_assertions)]`.
Change-Id: I04131501029772f30e28da8281d864427685097f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7019
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
In `a++b`, the previous implementation would move `b` (i.e. memcpy
its elements) twice. Let's do that only once.
We sure do call NixList.clone() a whole lot. At some point in the
future we probably want to do a SmolStr-type split for NixList into
a two-variant enum where one side is an Rc<Vec<Value>> for lists
longer than a certain length.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I32154d18785a1f663454a8b9d4afd3e78bffdf9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7040
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This commit adds a comment for the benefit of non-Lua-users
explaining what an upvalue is. It also adds a comment explaining
what `with_stack` does, including a brief reminder of nix's
slightly-unusual-but-well-justified handling of this construct.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If6d0e133292451af906e1c728e34010f99be8c7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7007
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Without this change it was possible to cause situations (see the new
test) in which a `with`-namespace was forced prematurely.
Change-Id: I879ea7763b43edc693feace2c73c890d426fafd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7031
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
|
