Age | Commit message (Collapse) | Author | Files | Lines |
|
Instead of using a sentinel LocalIdx which potentially points to a
value in the locals stack that does not actually exist, set up an
initial uninitialised phantom value representing the result of the
root expression.
Change-Id: I82ea774daab83168020a3850bed57d35ab25c7df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6424
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
When deciding whether an upvalue needs to have a deferred resolution
step, the *stack* indexes should be compared - not the locals indexes.
The results are almost always the same, but there are tricky
situations where this can cause errors.
It's difficult to reproduce these errors in isolation, as they depend
on other scope behaviour, so this is one in a series of commits to
address the combination of issues which will gain some tests at the
end.
Change-Id: Iaa400b8d9500af58f493ab10e4f95022f3b5dd21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6423
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: Id441646db550f6195c2e247a0afbb5c9d91da8a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6422
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Instead of using sentinel values and an additional bool, this tracks
the identifier of a local as an enum that is either a statically known
name, or a phantom.
To make this work correctly some more locals related logic has been
encapsulated in the `scope` module, which is a good thing (that's the
goal).
Phantom values are now not initialised by default, but the only
current call site of phantoms (`with` expression compilation) performs
the initialisation right away.
This commit changes no actual functionality right now, but paves the
way for fixing an issue related to `let` bodies.
Change-Id: I679f93a59a4daeacfe40f4012263cfb7bc05034e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6421
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The slot is now always known (at the root of the file it is simply
stack slot 0 once the scope drops back down to 0), so it does not need
to be wrapped in an `Option` and accessed in cumbersome ways anymore.
Change-Id: I46bf67a4cf5cb96e4874dffd0e3fb07c551d44f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6420
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
With this change the runtime trace contains much more exact
information about the context of the computation (entering/exiting
calls etc.)
This is in large part due to moving the tracer to be a field on the VM
itself, which enables consistent ordering of traces across the
execution, and tracing an execution with its *input* instead
of *output* stack.
Change-Id: Ibe525e6e7d869756501e52bef1a441619ce7332c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6419
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This makes it much easier to figure out what happened while debugging
this sort of thing.
Change-Id: I2e0e8096709adc647d63c04f213c547c415e5f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6418
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: Iaf94dfc7cb058f5c1c311066d92e01512e09cf71
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6417
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This could occur when the disassembler is enabled and tracing the
runtime while a thunk is being evaluated, as it would not be possible
for the *tracer* to borrow the thunk at this exact moment.
However, we know that if the borrowing fails here we are dealing with
a not-fully evaluated thunk (blackhole), which should just print the
internal representation.
Change-Id: I4bdb4f17818d55795368e3d28842048f488f0a91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6416
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Previously, "calling" (setting up the VM run loop for executing a call
frame) and "running" (running this loop to completion) were separate
operations.
This was basically an attempt to avoid nesting `VM::run` invocations.
However, doing things this way introduced some tricky bugs for exiting
out of the call frames of thunks vs. builtins & closures.
For now, we unify the two operations and always return the value to
the caller directly. For now this makes calls a little less effective,
but it gives us a chance to nail down some other strange behaviours
and then re-optimise this afterwards.
To make sure we tackle this again further down I've added it to the
list of known possible optimisations.
Change-Id: I96828ab6a628136e0bac1bf03555faa4e6b74ece
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6415
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
If the disassembler feature is enabled, make sure that an Rc of the
codemap is available through the chunk.
Change-Id: I700f27ab665a704f73457b19bd2d7efc93828a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6414
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: Iadbfbe2864ae42fe5492ef3ede0925baee4872b2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6413
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The casting methods of `Value` are pretty verbose, and actually
incorrect before this commit as they did not account for inner thunk
values.
To address this, we first attempt to make them correct by introducing
a standard macro to generate them and traverse the inner thunk(s) if
necessary.
This is likely to be a performance hit as it will now involve more
cloning of values. We can do multiple things to alleviate this, but
should do some measurements first.
Change-Id: If315d6e2afe7b69db727df535bc6cbfb89a691aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6412
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This makes it possible for builtins to force values on their own,
without the VM having to apply a strictness mask to the arguments
first.
Change-Id: Ib49a94e56ca2a8d515c39647381ab55a727766e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6411
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Scope poisoning must be inherited across lambda context boundaries,
e.g. if an outer scope has a poisoned `null`, any lambdas defined on
the same level must reference that poisoned identifier correctly.
Change-Id: I1aac64e1c048a6f3bacadb6d78ed295fa439e8b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6410
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
With this, if an error occurs while forcing a thunk (which is very
likely) it is threaded through to the top by wrapping it in the
ErrorKind::ThunkForce variant.
We could use this to generate "stacktrace-like" error output if we
wanted, or simply jump through and discard everything except the
innermost error.
Change-Id: I3c1c8708c2f73ae062815adf490ce935b1979da8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6409
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Get the length of a list
Change-Id: I41d91e96d833269541a1b3c23b7cc879f96d1e5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6407
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Multiplication and division :)
Change-Id: I79e76f3b55b7e9b8d1eb09b3d9741140b4d75742
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6406
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
First pass at supporting `builtins` for tvix. The following tests appear to be
WAI:
```shell
$ cd tvix/eval
$ cargo build
$ cargo test
```
Change-Id: I27cce23d503b17a886d1109e285e8b4be4264977
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6405
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Another step towards being able to report accurate errors. The codemap
spans contain strictly more accessible information, as they now retain
information about which input file something came from.
This required some shuffling around in the compiler to thread all the
right information to the right places.
Change-Id: I18ccfb20f07b0c33e1c4f51ca00cd09f7b2d19c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6404
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
As of this commit, the source spans of all emitted bytecode are fully
tracked.
Change-Id: I4c83deee0fc3f5e6fd6acad5a39047aec693b388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6403
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
These source spans will always point to the *value* that is being
forced, not the instruction that caused the force to be emitted. This
makes sense so that errors during forcing point at the value and not
the surrounding expression.
Change-Id: I4694414a3281a0de878f71634105b92148ec61f6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6402
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: Iaedb0742940e4c2b9f4210579ed28e6deb32d5c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6401
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
With this change, the upvalue data instructions used by finalisers for
thunks and closures track the source span of the first identifier that
created the upvalue (if the same value is closed over multiple times
the upvalue will be reused, hence only the first one).
To do this the upvalue struct used by the compiler's scope now carries
an identifier node, which had to be threaded through quite a few
places.
Change-Id: I15a5fcb4c8abbd48544a2325f297a5ad14ec06ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6400
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This separation makes it possible to annotate the upvalue itself with
the span that created it, which (due to upvalue reuse) is only the
first one for an instance of the given UpvalueKind.
Change-Id: I9a991da6a3e8d71a92f981314bed900bcf434d44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6399
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I73f13c914d84e052a43b4eddb09db1acd8a7076a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6398
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: If1bb463026414597acd561dc2032549fdb70f986
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6397
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I2f420fc915b6bfc5b197e9d0c128b539c4bc7467
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6396
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I1d58ce548b5b47e967928e85bb64acf5ed69ecc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6395
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I8e6ec0a84430d6e417fc7fd3e722a588913e4d18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6394
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I9457917277a7fdd8bdbe227a567b28969312d06e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6393
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
These are again a bit tricky in terms of emitted errors. The main
error is that the condition is not a boolean, which means that the
jump inspecting the condition must derive from the condition itself to
return an error at the correct position.
For other parts of the expression, it is simply the node itself.
Change-Id: I72411630e5d57dfc199f4c3c48afe443fe966322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6392
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I5415f63ddde388847a261da4ce9a8d8235657535
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6391
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This one is tricky, specifically the span used for the final jump. I
decided that it makes sense to use the attrpath node, as the final
jump is the one that jumps *over* the default value, so the effect of
this is more closely related to the selector than the default.
It might be more correct to pass through the `or` token itself and
point to this for the jumps, but it depends a bit on what shape of
errors we could end up producing from this.
Change-Id: I29fbc97ba6b9e14e1a0e5f3a7759ddc299dd9c0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6390
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ifa8b0e7905f9d2746f83d6503ef0e8d42ce20f9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6389
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I0fcb07146b5a38c67bc46ed3f67533b056858390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6388
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Icfd057ee29180cac17264bb3299c67eae0051aee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6387
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I7ca08c6c0124f653e55fcc86413a847f0a4c50c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6386
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Idb842fb20fab14150455a81ea6c947e75b314d8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6385
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I43e433ff3094232b244d38335d31e56a79ca70c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6384
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I79034a4aa04aea66ec598e33e6eab35e1e19c0d0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6383
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I29e6c7f9e25d1b2e6bafa602c463eb9ccee2131b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6382
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I42fbd0bb6c2a8feb520e262a25f59ff27dcd035c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6381
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Icfe77f85c4f65b6bf28b8752c2795419e8e396ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6380
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
These are not actually used yet; this is in preparation for a
multi-commit chain for emitting all the right spans in the right
locations.
Change-Id: Ie99d6add2696c1cc0acb9ab928917a10237159de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This instantiates a codemap outside of the compiler and passes a
reference to the file currently under compilation to it. Note that the
"file" might just be a REPL line.
Change-Id: I131ae1ddb6d718e1374750da9ba0b99608c6058d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6378
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This is currently just a wrapper around Chunk::push_op, but will gain
the span resolution logic in a moment.
Change-Id: I862bf9ecff0932f8da6708401ea044b9442c5d5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6377
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This adds a new vector to the chunk data structure which tracks spans
into a codemap. The compiler will emit this information to the chunk
when adding instructions.
The internal representation of the spans is slightly optimised to
avoid storing duplicate spans, as there are cases where many
instructions might be derived from the same span.
Change-Id: I336f8c912e7eb50ea02ed71e6164f651ca3ca790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6376
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Updated the rnix hash manually, and ran `cargo update` for the rest.
Change-Id: I457262625d648e25d745efa4d33ae44cb8f21326
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6375
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|