Age | Commit message (Collapse) | Author | Files | Lines |
|
Instead, return an error, and move the entire check before starting to
ingest the data underneath.
Change-Id: Idcfba115cb7d599f5fc72a156aaad9d4d4714fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10507
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
We can use cli.json.then_some(…) to create a Some(…), allowing us to
omit the else { None } lines.
Change-Id: I6c8142a08d8cb88d6c8302e5ca7570698fcf2aa3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10505
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
This takes three URLs, and constructs Arc'ed
{Blob,Directory,PathInfo}Service, allowing to remove some of the
boilerplate.
Change-Id: I40e7c2b551442ef2acdc543dfc87ab97e7c742bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10484
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
While we currently mostly use it in an Arc, as we need to clone it
inside PathInfoService, there might be other usecases not requiring it
to be Clone.
Change-Id: Ia05bb370340792a048e2036be30e285ef1e63870
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10483
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
While we currently mostly use it in an Arc, as we need to clone it
inside PathInfoService, there might be other usecases not requiring it
to be Clone.
Change-Id: I7bd337cd2e4c2d4154b385461eefa62c9b78345d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10482
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
Make it more clear this is not tokio::io.
Change-Id: Ic2fa56f0baf1c200b6631098d556388a19629a45
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10452
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Change-Id: If4748cb800276fc42779ba8973d1eef72df0503e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10450
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
With the recent introduction of the RootNodes trait, there's nothing in
the fs module pulling in tvix-store dependencies, so it can live in
tvix-castore.
This allows other crates to make use of TvixStoreFS, without having to
pull in tvix-store.
For example, a tvix-build using a fuse mountpoint at /nix/store doesn't
need a PathInfoService to hold the root nodes that should be present,
but just a list.
tvix-store now has a pathinfoservice/fs module, which contains the
necessary glue logic to implement the RootNodes trait for a
PathInfoService.
To satisfy Rust orphan rules for trait implementations, we had to add a
small wrapper struct. It's mostly hidden away by the make_fs helper
function returning a TvixStoreFs.
It can't be entirely private, as its still leaking into the concrete
type of TvixStoreFS.
tvix-store still has `fuse` and `virtiofs` features, but they now simply
enable these features in the `tvix-castore` crate they depend on.
The tests for the fuse functionality stay in tvix-store for now, as
they populate the root nodes through a PathInfoService.
Once above mentioned "list of root nodes" implementation exists, we
might want to shuffle this around one more time.
Fixes b/341.
Change-Id: I989f664827a5a361b23b34368d242d10c157c756
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10378
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This makes PathInfoService::from_addr return a Box<dyn PathInfoService>,
rather than an Arc<dyn …>, and leaves it up to the consumers to rewrap
it into an Arc where needed.
This allows us to drop the Arc for the tvix-store daemon subcommand.
Change-Id: Ic83aa2ade6c51912281bd17c7eef7252e152b2d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10409
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I7a2b951d9c9251a053a0de40f31836bda03a922d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10408
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ib94376db3a57853d980112919c2d6fcc0f566883
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10407
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
|
|
This moves the sync `channel::from_url` to a async
`tonic::channel_from_url`. It now allows connecting non-lazily if `wait-
connect=1` is set in the URL params.
Also, make the pingpong tests for blobsvc and directorysvc use the wait-
connect=1 codepath.
Change-Id: Ibeea33117c8121814627e7f6aba0e943ae2e92ca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10030
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This adds support to represent the `CA` field found in some .narinfo
files. As `deriver`, it's also a subfield of the `narinfo` field.
Extending nix-compat with a more accessible data structure that can
take care of formatting, as well as writing validation functions in Rust
+ Golang, and integrating it into nar-bridge is something for a followup
CL.
Change-Id: I71e9c30957bcd03051a491aa54d7baac25b6dd2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9795
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This information is present in the .narinfo files, it should have gone
there.
Change-Id: Ib43d0cf30c2795bf1fe77c46646174353ade0458
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9794
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
Tonic support was added to tokio-listener upstream which removes the
need for use to have tonic compatibility wrapper types around it.
See: https://github.com/vi/tokio-listener/pull/2
Fixes b/311
Change-Id: I04a2dbb3bc3c8bfe9339583c0b46070c7ec97811
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9721
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This uses the newly introduced StorePath message type to add a Deriver
field to the PathInfo message.
Support for validation is added to both the golang and rust
implementation. This includes extending unit tests.
Change-Id: Ifc3eb3263fa25b9eec260db354cd74234c40af7e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9647
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
We already use store_path::build_nar_based_store_path as a helper
function down there.
Change-Id: I46842bb0a2f4cd5de7dcfc3c4b6aae399618667a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9571
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This partially fixes b/312 and gets FUSE to work again on MacOS.
It is mostly small type changes and an update to fuse-backend-rs because
upstream currently doesn't work with MacFuse. It also sets the default
FUSE thread count on MacOS to 1 because otherwise the mount command will
hang when shutting down as only one thread gets ENODEV and all the others
just keep blocking.
Change-Id: Ifb3c4268caf296c487049c1dc4618acb32497f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9490
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
|
|
The unmount method in FuseDaemon calls join on a bunch of threads and that is
a blocking call but it is called from an async context in the tvix-store
binary.
This change wraps the call to unmount in a spawn_blocking.
Change-Id: If89183b4a3f890874e75f5faf90cd24cb18da1e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9489
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
- rename the feature to `tonic-reflection` in both tvix-store and tvix-
castore.
- set it to disabled in tvix-castore by default
- enable it in tvix-store, and pull in tvix-castore with the feature
enabled.
Change-Id: Ie22833d85569502cae55812f6eeb17a9c15b9e2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9472
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
This adds support for listening on UNIX domain sockets via the
tokio-listener crate. The crate will automatically determine whether to
start a TCP or UNIX domain socket server based on the listen address.
Unfortunately, it's not compatible with tonic right out of the box so I
added some wrapper types to implement the necessary traits to make
things work. We should investigate upstreaming a `tonic` option to the
tokio-listener crate which implements the relevant `tonic` traits.
Example:
```
$ tvix-store daemon -l /run/tvix-store.sock
INFO tvix_store: tvix-store listening on /run/tvix-store.sock
$ tvix-store mount -l /mnt/tvix --blob-service-addr grpc+unix:///run/tvix-store.sock --directory-service-addr grpc+unix:///run/tvix-store.sock --path-info-service-addr grpc+unix:///run/tvix-store.sock
$ ls /mnt/tvix
```
Change-Id: I91c4a4b0c5a177b3b90e6c01a4e5d263130e6bdb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9429
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
This adds a virtiofs daemon implementation which hooks into the existing
tvix-store filesystem implementation that is used for FUSE.
This allows adding the filesystem to a microvm without having to set up
FUSE inside the guest.
Change-Id: If80c36c9657f2289853e8d9a364bf4f1f7b7559c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9344
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This splits the pure content-addressed layers from tvix-store into a
`castore` crate, and only leaves PathInfo related things, as well as the
CLI entrypoint in the tvix-store crate.
Notable changes:
- `fixtures` and `utils` had to be moved out of the `test` cfg, so they
can be imported from tvix-store.
- Some ad-hoc fixtures in the test were moved to proper fixtures in the
same step.
- The protos are now created by a (more static) recipe in the protos/
directory.
The (now two) golang targets are commented out, as it's not possible to
update them properly in the same CL. This will be done by a followup CL
once this is merged (and whitby deployed)
Bug: https://b.tvl.fyi/issues/301
Change-Id: I8d675d4bf1fb697eb7d479747c1b1e3635718107
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9370
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
We've decided to asyncify all of the services to reduce some of the
pains going back and for between sync<->async. The end goal will be for
all the tvix-store internals to be async and then expose a sync
interface for things like tvix eval io.
Change-Id: I97c71f8db1d05a38bd8f625df5087d565705d52d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9369
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
In prepration for adding virtiofs support, I thought it would make sense
to split out the filesystem implementation from FUSE itself.
The `fs` module holds the tvix-store filesystem implemetation and the
`fuse` module holds the code to spawn a FUSE daemon backed by multiple
threads.
Change-Id: I8c58447b8c3aa016a613068f8e7ec166554e237c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9343
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
|
|
This switches the FUSE implementation from fuser to fuse-backend-rs.
fuse-backend-rs is designed to work with both FUSE and virtiofs.
Virtiofs support will make it possible to plug the tvix-store into a
microvm and have `/nix/store` access without having to setup FUSE inside
the guest.
Additionally fuse-backend-rs has nice support for running multiple FUSE
threads and has some async support.
The goal of this commit is to mechanically switch over to
fuse-backend-rs with minimal changes. I did have to add some locks here
and there because fuse-backend-rs uses `&self` on all methods whereas
fuser uses `&mut self`. `&self` is required for concurrent access to the
FUSE server, so this makes sense.
We can consider switching to concurrent maps and use some other
techniques to reduce lock contention and critical section size.
Issue: https://b.tvl.fyi/issues/305
Change-Id: Icde5a58c6eef98f8984c1e04e980b756dfb76b47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9341
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
We previously kept the trait of a BlobService sync.
This however had some annoying consequences:
- It became more and more complicated to track when we're in a context
with an async runtime in the context or not, producing bugs like
https://b.tvl.fyi/issues/304
- The sync trait shielded away async clients from async worloads,
requiring manual block_on code inside the gRPC client code, and
spawn_blocking calls in consumers of the trait, even if they were
async (like the gRPC server)
- We had to write our own custom glue code (SyncReadIntoAsyncRead)
to convert a sync io::Read into a tokio::io::AsyncRead, which already
existed in tokio internally, but upstream ia hesitant to expose.
This now makes the BlobService trait async (via the async_trait macro,
like we already do in various gRPC parts), and replaces the sync readers
and writers with their async counterparts.
Tests interacting with a BlobService now need to have an async runtime
available, the easiest way for this is to mark the test functions
with the tokio::test macro, allowing us to directly .await in the test
function.
In places where we don't have an async runtime available from context
(like tvix-cli), we can pass one down explicitly.
Now that we don't provide a sync interface anymore, the (sync) FUSE
library now holds a pointer to a tokio runtime handle, and needs to at
least have 2 threads available when talking to a blob service (which is
why some of the tests now use the multi_thread flavor).
The FUSE tests got a bit more verbose, as we couldn't use the
setup_and_mount function accepting a callback anymore. We can hopefully
move some of the test fixture setup to rstest in the future to make this
less repetitive.
Co-Authored-By: Connor Brewster <cbrewster@hey.com>
Change-Id: Ia0501b606e32c852d0108de9c9016b21c94a3c05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9329
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
This allows comparing the output in an integration test.
Change-Id: I8bb2254e18e90005a4f1b30fd47ef69642e3732e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9337
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This leaves some space in stdout to provide actual meaningful output.
Also, rename print_node to log_node because that's what it does, it's
using the logger to log out more detailed info.
Change-Id: Ic64a6330dbfcdc63eb4198067a5c5e47b841b9a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9336
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
|
|
Forgot to squash this into cl/9217.
Change-Id: Id5a87cbe729592f3b53e8c329b6890519f5da319
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9272
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This enables the tokio `signal` feature, and registers a ctrl_c signal
handler, which will use the unmount handle to unmount in case a ctrl-c
signal is received.
This avoids having disconnected mountpoints when Ctrl-C'ing a
`tvix-store mount` invocation.
In case the filesystem is unmounted externally (via `umount /path/to/
mountpoint`), the future is waiting for the signal is never resolved and
the task is stopped.
Change-Id: I149f705a6cb50188177f2a6c6a5fcd77218e2a3f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9218
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
This provides an additional configuration flag to the tvix-store mount
subcommand, and logic in the fuse module to request listing for the
root of the mountpoint.
Change-Id: I05a8bc11f7991b574696f27a30afe0f4e718a58c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9217
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: adisbladis <adisbladis@gmail.com>
Tested-by: BuildkiteCI
|
|
We don't need to explicitly describe the type of the task itself,
describing the return type of the async closure is sufficient.
Also, use io::Result<_> instead of Result<_, io::Error>.
Change-Id: I9ab3f990eb49929b0aea335b2bb07da392ab631f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9267
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
|
|
This trait is eval-specific, there's no point in dealing with these
things in tvix-store.
This implements the EvalIO interface for a Tvix store.
The proper place for this glue code (for now) is tvix-cli, which knows
about both tvix-store and tvix-eval.
There's one annoyance with this move: The `tvix-store import` subcommand
previously also used the TvixStoreIO implementation (because it
conveniently did what we wanted).
Some of this code had to be duplicated, mostly logic to calculate the
NAR-based output path and create the PathInfo object.
Some, but potentially more of this can be extracted into helper
functions in a shared crate, and then be used from both TvixStoreIO in
tvix-cli as well as the tvix-store CLI entrypoint.
Change-Id: Ia7515e83c1b54f95baf810fbd8414c5521382d40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9212
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
|
|
Since the refactor to use URIs for all three services, this actually
does talk to a daemon by default.
Change-Id: Ied296772b77eef514bfcae0a9dfc50f848a1c2f3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9210
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Some paths might use names that are not valid UTF-8. We should be able
to represent them.
We don't actually need to touch the PathInfo structures, as they need to
represent StorePaths, which come with their own harder restrictions,
which can't encode non-UTF8 data.
While this doesn't change any of the wire format of the gRPC messages,
it does however change the interface of tvix_eval::EvalIO - its
read_dir() method does now return a list of Vec<u8>, rather than
SmolStr. Maybe this should be OsString instead?
Change-Id: I821016d9a58ec441ee081b0b9f01c9240723af0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8974
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
A previous iteration of this code did actually connect (in the gRPC
client), which was why we had this function async.
However, as the connection there is now lazy too, we can drop the
asyncness in this function.
Change-Id: Idd5bd953a6a1c2334066ee672cfb87fcb74f9f94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8780
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I24e822351a837fce2aed568a647d009099ef32ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8747
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Add --directory-service-addr arg to tvix-store CLI.
Change-Id: Iea1e6f08f27f7157b21ccf397297c68358bd78a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8743
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This allows constructing blob stores with a URL syntax at runtime,
by passing the --blob-service-addr arg.
We probably still want to have some builder pattern here, to allow
additional schemes to be registered.
Change-Id: Ie588ff7a7c6fb64c9474dfbd2e4bc5f168dfd778
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8742
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This removes the use of generics, like previously done with Blob and
Directory services.
Change-Id: I7cc8bd1439b026c88e80c11e38aafc63c74e5e84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8751
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I5685379bd6f89d17da6843d31bef4c1fc4dc0a18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8745
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
This allows us to blob services without closing them before putting them
in a box.
We currently need to use Arc<_>, not Rc<_>, because the GRPC wrappers
require Sync.
Change-Id: I679c5f06b62304f5b0456cfefe25a0a881de7c84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8738
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
Once we support configuring services at runtime, we don't know what
DirectoryService we're using at compile time.
This also means, we can't explicitly use the is_closed method from
GRPCPutter, without making it part of the DirectoryPutter itself.
Change-Id: Icd2a1ec4fc5649a6cd15c9cc7db4c2b473630431
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8727
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Putting this in the PathInfoService trait makes much more sense, we can
have direct control over where/how to cache the results in the
implementation.
This now requires each PathInfoService to hold pointers to BlobService
and DirectoryService.
Change-Id: I4faae780d43eae4beeb57bd5e190e6d1a5d3314e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8724
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
There's only one way to calculate NAR files, by walking through them.
Things like caching such replies should be done closer to where we use
these, composing NARCalculationService doesn't actually give us much.
Instead, expose two functions, `nar::calculate_size_and_sha256` and
`nar::writer_nar`, the latter writing NAR to a writer, the former using
write_nar to only keeping the NAR size and digest.
Change-Id: Ie5d2cfea35470fdbb5cbf9da1136b0cdf0250266
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8723
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
To construct various stores at runtime, we need to eliminate associated
types from the BlobService trait, and return Box<dyn …> instead of
specific types.
This also means we can't consume self in the close() method, so
everything we write to is put in an Option<>, and during the first close
we take from there.
Change-Id: Ia523b6ab2f2a5276f51cb5d17e81a5925bce69b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8647
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
`tvix-store mount PATH` will mount the tvix-store to the given path.
Change-Id: Icb82a6b3cb8a22eec856c375a28ae5580403833f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8665
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
This now creates different store client, depending on the cli
subcommand.
The `import` command will connect to the gRPC service, and the `daemon`
command will use the sled implementation.
It might make sense to define some URI syntax to make this configurable
by the user, via the CLI.
Change-Id: I72351fcf0e83a013b6aa67a90b64c108cbb01ffd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8619
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I3e1428a4725fc2e552e8f37bc0550121117fcef6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8633
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
|