| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This uses our own data type to deal with Directories in the castore model.
It makes some undesired states unrepresentable, removing the need for conversions and checking in various places:
- In the protobuf, blake3 digests could have a wrong length, as proto doesn't know fixed-size fields. We now use `B3Digest`, which makes cloning cheaper, and removes the need to do size-checking everywhere.
- In the protobuf, we had three different lists for `files`, `symlinks` and `directories`. This was mostly a protobuf size optimization, but made interacting with them a bit awkward. This has now been replaced with a list of enums, and convenience iterators to get various nodes, and add new ones.
Change-Id: I7b92691bb06d77ff3f58a5ccea94a22c16f84f04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12057
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Provides a derivation file dumping functionality for tvix-cli that can
be used when passing the --drv-dumpdir CLI arg to tvix-cli.
This will dump all the known derivation files into the specified
directory, making it easier to debug derivation divergences between Tvix
generated drvs and the drvs generated by Nix.
Supersedes: https://cl.tvl.fyi/c/depot/+/11265
Change-Id: I0e10b26eba22032b84ac543af0d4150ad87aed3e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12192
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: I7cab29ecfa1823c2103b4c47b7d784bc31459d55
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12008
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: yuka <yuka@yuka.dev>
|
|
Change-Id: Ie6290b296baba2b987f1a61c9bb4c78549ac11f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11983
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
|
|
Make constructing of a new Evaluation use the builder pattern rather
than setting public mutable fields. This is currently a pure
refactor (no functionality has changed) but has a few advantages:
- We've encapsulated the internals of the fields in Evaluation, meaning
we can change them without too much breakage of clients
- We have type safety that prevents us from ever changing the fields of
an Evaluation after it's built (which matters more in a world where we
reuse Evaluations).
More importantly, this paves the road for doing different things with
the construction of an Evaluation - notably, sharing certain things like
the GlobalsMap across subsequent evaluations in eg the REPL.
Fixes: b/262
Change-Id: I4a27116faac14cdd144fc7c992d14ae095a1aca4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11956
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
|
|
We use a bit less cloning that way.
Change-Id: I28bf99577e4a481e35fbf99d0724adab5502a1bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11874
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
|
|
If builtins.path is passed a regular file, no filtering is applied.
We use the just-introduced file_type function in the EvalIO trait for
that.
This means, we don't need to pass through filtered_ingest, and can
assemble the FileNode directly in that specific match case.
This also means, we can explicitly calculate the sha256 flat digest,
and avoid having to pipe through the file contents again (via
blob_to_sha256_hash) to construct the sha256 digest.
Change-Id: I500b19dd9e4b7cc897d88b44547e7851559e5a4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11872
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This allows peeking of the type at a given path.
It's necessary, as an open() might not fail until you try to read()
from it, and generally, stat'ing can be faster in some cases.
Change-Id: Ib002da3194a3546ca286de49aac8d1022ec5560f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11871
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
These also need to be present in the input nodes of the BuildRequest.
Change-Id: Ie9b957805e42f766002581adc6182a6543c5333b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11802
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
We need some shared queue, preventing the same fetches/builds from
getting triggered multiple times unnecessarily.
Change-Id: I7c4a3c66db558f5cccd66865b170242b758e3e02
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11800
Reviewed-by: aspen <root@gws.fyi>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
We immediately reported "Building", even though then populated necessary
inputs, which looked a bit odd. Make it clear we're still waiting, and
update the spinner message once we have all inputs we were waiting for.
In the future, we might want to have separate spans for this, so the
timer gets reset, but that's something for later.
Change-Id: Ic22c9a906d0e7e7179c5ee328162401261efc224
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11799
Reviewed-by: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
This should also report progress on fetches which we couldn't delay
until actually having to IO into them, like `builtins.fetchurl` calls
without a upfront-provided hash.
While at it, upgrade the progress spinners to progress bars, which
increment if we know the size of the fetch.
Change-Id: Ic3f332286d8bc2177f3d994ba25b165728d4b702
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11797
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: aspen <root@gws.fyi>
|
|
"Fetching" was uppercase, "building" was lowercase.
Let's make this consistent.
Change-Id: I11c16f1a7d2057ada4d057e553a4ceaa59597f26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11796
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
In `store_path_to_node`, in case we need to build or fetch something,
render a progress bar, using the spinner for now.
We can upgrade this to a progress *bar* later.
Change-Id: I4a7cf5ef8f639076f176af9b39d276be3f37c8ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11793
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
nixpkgs calls <nix/fetchurl.nix> during nixpkgs bootstrap.
This produces a fake derivation with system = builtin
and builder = builtin:fetchurl, and needs to download files from the
internet.
At the end of the Derivation construction, if we have such a derivation,
also synthesize a `Fetch` struct, which we add to the known fetch paths.
This will then cause these fetches to be picked up like all other
fetches in TvixStoreIO.
Change-Id: I72cbca4f85da106b25eda97693a6a6e59911cd57
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10975
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
This one's relatively simple - we just check if the store path exists,
and if it does we make a new contextful string containing the store path
as its only context element.
Automatic testing seems tricky for this (I think?) so I tested it
manually:
tvix-repl> builtins.storePath /nix/store/yn46i4xx5alh7gs6fpkxk430i34rp2q9-hello-2.12.1
=> "/nix/store/yn46i4xx5alh7gs6fpkxk430i34rp2q9-hello-2.12.1" :: string
Change-Id: I8a0d9726e4102ab872c53c2419679c2c855a5a18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11696
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
|
|
This shouldn't be part of the PathInfoService trait.
Pretty much none of the PathInfoServices do implement it, and requiring
them to implement it means they also cannot make use of this calculation
already being done by other PathInfoServices.
Move it out into its own NarCalculationService trait, defined somewhere
at tvix_store::nar, and have everyone who wants to trigger nar
calculation use nar_calculation_service directly, which now is an
additional field in TvixStoreIO for example.
It being moved outside the PathInfoService trait doesn't prohibit
specific implementations to implement it (like the GRPC client for the
`PathInfoService` does.
This is currently wired together in a bit of a hacky fashion - as of
now, everything uses the naive implementation that traverses blob and
directoryservice, rather than composing it properly. I want to leave
that up to a later CL, dealing with other parts of store composition
too.
Change-Id: I18d07ea4301d4a07651b8218bc5fe95e4e307208
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11619
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Rust 1.77 supports async recursion as long as there is some form of
indirection (ie. `Box::pin`). This removes the need to use the
async-recursion crate.
Change-Id: Ic9613ab7f32016f0103032a861edff92e2fb8b41
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11596
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
This switches from using std::path::Path to using castore paths.
We can drop some error handling in descend_to, as absolute (or redundant)
paths are not representable.
We however now need to convert from a std::path::Path to our
representation, and decide to accept .. canonicalization, as paths in
EvalIO might contain this. Dealing .. to hop into another store path, if
we encounter this, should be dealt with in a previous step.
Change-Id: I5e94693808420c5d56587c68731252b54755bf93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11575
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
Doing the fetch comes up with the root node, but we still need to
descend from there to the desired subpath.
Move things around to ensure the fetch case also only sets root_node.
This logic should probably be moved into smaller, easier to consume
functions.
Change-Id: I6ab9317df794f53d2504029bbc77859e89fef1ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11507
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Have fetcher builtins call queue_fetch() whenever they don't need to
fetch something immediately, and teach TvixStoreIO::store_path_to_node
on how to look up (and call ingest_and persist on our Fetcher).
Change-Id: Id4bd9d639fac9e4bee20c0b1c584148740b15c2f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11501
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
We actually want to delay fetching until we actually need the file. A
simple evaluation asking for `.outPath` or `.drvPath` should work even
in a pure offline environment.
Before this CL, the fetching logic was quite distributed between
tvix_store_io, and builtins/fetchers.rs.
Rather than having various functions and conversions between structs,
describe a Fetch as an enum type, with the fields describing the fetch.
Define a store_path() function on top of `Fetch` which can be used to
ask for the calculated store path (if the digest has been provided
upfront).
Have a `Fetcher` struct, and give it a `fetch_and_persist` function,
taking a `Fetch` as well as a desired name, and have it deal with all
the logic of persisting the PathInfos. It also returns a StorePathRef,
similar to the `.store_path()` method on a `Fetch` struct.
In a followup CL, we can extend KnownPaths to track fetches AND
derivations, and then use `Fetcher` when we need to do IO into that
store path.
Change-Id: Ib39a96baeb661750a8706b461f8ba4abb342e777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11500
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Rather than carrying around an Future in the IngestionEntry::Regular,
simply carry the plain B3Digest.
Code reading through a non-seekable data stream has no choice but to
read and upload blobs immediately, and code seeking through something
seekable (like a filesystem) probably knows better what concurrency to
pick when ingesting, rather than the consuming side.
(Our only) one of these seekable source implementations is now doing
exactly that. We produce a stream of futures, and then use
[StreamExt::buffered] to process more than one, concurrently.
We still keep the same order, to avoid shuffling things and violating
the stream order.
This also cleans up walk_path_for_ingestion in castore/import, as well
as ingest_dir_entries in glue/tvix_store_io.
Change-Id: I5eb70f3e1e372c74bcbfcf6b6e2653eba36e151d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11491
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
This function was originally called `read_to_string` but was changed to
`open` to make it so that file contents aren't always held in memory.
A comment and error message were not updated to reflect the new name of
this method.
Change-Id: I3d86e2f6d7006c2e1513121fc3c62efcb7e7b9bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11495
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Implement a first pass at the fetchTarball builtin.
This uses much of the same machinery as fetchUrl, but has the extra
complexity that tarballs have to be extracted and imported as store
paths (into the directory- and blob-services) before hashing. That's
reasonably involved due to the structure of those two services.
This is (unfortunately) not easy to test in an automated way, but I've
tested it manually for now and it seems to work:
tvix-repl> (import ../. {}).third_party.nixpkgs.hello.outPath
=> "/nix/store/dbghhbq1x39yxgkv3vkgfwbxrmw9nfzi-hello-2.12.1" :: string
Co-authored-by: Connor Brewster <cbrewster@hey.com>
Change-Id: I57afc6b91bad617a608a35bb357861e782a864c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11020
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Move error types and filesystem-specific functions to a separate file,
and keep the fs:: namespace in public exports.
Change-Id: I5e9e83ad78d9aea38553fafc293d3e4f8c31a8c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11486
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
|
|
Previously the store ingestion code was coupled to `walkdir::DirEntry`s
produced by the `walkdir` crate which made it impossible to reuse
ingesting from other sources like tarballs or NARs.
This introduces a `IngestionEntry` which carries enough information for
store ingestion and a future for computing the Blake3 digest of files.
This allows the producer to perform file uploads in a way that makes
sense for the source, ie. the filesystem upload could concurrently
upload multiple files at the same time, while the NAR ingestor will need
to ingest the entire blob before yielding the next blob in the stream.
In the future we can buffer small blobs and upload them concurrently,
but the full blob still needs to be read from the NAR before advancing.
Change-Id: I6d144063e2ba5b05e765bac1f27d41b3c8e7b283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11462
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Right now `builtins.hashFile` always reads the entire file into memory
before hashing, which is not ideal for large files. This replaces
`read_to_string` with `open_file` which allows calculating the hash of
the file without buffering it entirely into memory. Other callers can
continue to buffer into memory if they choose, but they still use the
`open_file` VM request and then call `read_to_string` or `read_to_end`
on the `std::io::Reader`.
Fixes b/380
Change-Id: Ifa1c8324bcee8f751604b0b449feab875c632fda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11236
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Now, it supports almost everything except `recursive = false;`, i.e. `flat`-ingestion
because we have no knob exposed in the tvix store import side to do it.
This has been tested to work.
Change-Id: I2e9da10ceccdfbf45b43c532077ed45d6306aa98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10597
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Instead of enforcing NAR SHA256 all the time, we generalize the
`PathInfo` constructor to take a `CAHash` argument which can drive
whether we are having a flat, NAR or text scheme.
With this, it is now possible to implement flat schemes in our
evaluation builtins, e.g. `builtins.path`.
Change-Id: I15bfee0ef4f0f428bfbd2f30c57c012cdcf6a976
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11286
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Make this function async, and do the block_on on the (single) callsite.
Change-Id: Ib8b0b54ab5370fe02ef95f38a45d8866868a9d60
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11285
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
Replace the (single) callsite with some code interacting with the tokio
runtime to block on the async version.
Change-Id: I3976496ae77b2bb8734603f303655834265e3f0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11284
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
Let's get rid of these sync helpers, they make this less understandable.
Change-Id: I3c7294647849db2747762722247c65e4e2947757
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11283
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
Implement the fetchurl builtin, and lay the groundwork for implementing
the fetchTarball builtin (which works very similarly, and is implemented
using almost the same code in C++ nix).
An overview of how this works:
1. First, we check if the store path that *would* result from the
download already exists in the store - if it does, we just return
that
2. If we need to download the URL, TvixStoreIO has an `http_client:
reqwest::Client` field now which we use to make the request
3. As we're downloading the blob, we hash the data incrementally into a
SHA256 hasher
4. We compare the hash against the expected hash (if any) and bail out
if it doesn't match
5. Finally, we put the blob in the store and return the store path
Since the logic is very similar, this commit also implements a *chunk*
of `fetchTarball` (though the actual implementation will likely include
a refactor to some of the code reuse here).
The main thing that's missing here is caching of downloaded blobs when
fetchurl is called without a hash - I've opened b/381 to track the TODO
there.
Adding the `SSL_CERT_FILE` here is necessary to teach reqwest how to
load it during tests - see 1c16dee20 (feat(tvix/store): use reqwests'
rustls-native-roots feature, 2024-03-03) for more info.
Change-Id: I83c4abbc7c0c3bfe92461917e23d6d3430fbf137
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11017
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: aspen <root@gws.fyi>
|
|
With our values using bstr now, we're not restricted to only reading
files that contain valid UTF-8.
Update our `read_to_string` function to `read_to_end`
(named like `std::io::Read::read_to_end`), and have it return a Vec<u8>.
Change-Id: I87f0291dc855a132689576559c891d66c30ddf2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11003
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Pádraic Ó Mhuiris <patrick.morris.310@gmail.com>
Reviewed-by: flokli <flokli@flokli.de>
|
|
https: //b.tvl.fyi/issues/264
Change-Id: Icb09be9643245cc68d09f01d7723af2d44d6bd1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11001
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
...in `Derivation`.
This is more type-safe and should consume less memory.
This also removes some allocations in the potentially hot path of output hash calculation.
https: //b.tvl.fyi/issues/264
Change-Id: I6ad7d3cb868dc9f750894d449a6065608ef06e8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10957
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Reviewed-by: Peter Kolloch <info@eigenvalue.net>
|
|
We add a new set of builtins called `import_builtins`, which
will contain import-related builtins, such as `builtins.path` and
`builtins.filterSource`. Both can import paths into the store, with
various knobs to alter the result, e.g. filtering, renaming, expected
hashes.
We introduce `filtered_ingest` which will drive the filtered ingestion
via the Nix function via the generator machinery, and then we register
the root node to the path info service inside the store.
`builtins.filterSource` is very simple, `builtins.path` is a more
complicated model requiring the same logic albeit more sophisticated
with name customization, file ingestion method and expected SHA-256.
Change-Id: I1083f37808b35f7b37818c8ffb9543d9682b2de2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10654
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Initialize a new empty builtins module `fetcher_builtins`, which will
contain the builtins which fetch URLs from the internet:
* fetchurl
* fetchGit
* fetchTarball
* fetchTree (maybe? this is experimental)
These builtins are all implemented in CPP nix at:
https://github.com/NixOS/nix/blob/2.20.2/src/libexpr/primops/fetchTree.cc
These builtins are added to the evaluation context using a similar
mechanism to the derivation builtins, and have been added everywhere
derivation builtins were previously being added.
Change-Id: I133b91cc9560f23028621414537f712e7bd8a825
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10974
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
That's one possible abstraction to drive builds.
Whenever IO into a store path is requested, we look up the root node,
and in case we don't have it in PathInfoService, but KnownPaths gives us
a Derivation for that output path, trigger a build and await the result.
This recursively might trigger builds for parent paths if they haven't
been built yet.
Another option would be to simply expose a PathInfoService interface for
a builder too, and loop all building into IO via PathInfoService
composition - but let's start with something.
Note tvix-cli doesn't have a configurable BuildService yet, it's plugged
to the DummyBuildService, so whenever it needs to do a build, it'll fail,
but that's how it can be provoked:
```
(builtins.readFile (import <nixpkgs> {}).hello.outPath + "/bin/hello")
[…]
error[E029]: I/O error: /nix/store/cg8a576pz2yfc1wbhxm1zy4x7lrk8pix-hello-2.12.1: builds are not supported with DummyBuildService
--> [code]:1:2
|
1 | (builtins.readFile (import <nixpkgs> {}).hello.outPath + "/bin/hello")
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
Note how this fails, while pure output path calculation
(`(import <nixpkgs> {}).hello.outPath + "/bin/hello")`) still succeeds.
Change-Id: Id2075d8a2b18554d0dd608b4b29146a8cd411e7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10793
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
This causes a bit too much spam otherwise.
Change-Id: If3ced9ddfee7f49453711cd26469d1eb81983c71
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10953
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Print store paths with their ToString implementation for brevity, and
don't log the sucessful return value of read_to_string.
Change-Id: I01b6838398acd66b8818095622f361fcca26fa77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10854
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
Storing a full BString here incurs the extra overhead of the capacity
for the inner byte-vector, which we basically never use as Nix strings
are immutable (and we don't do any mutation / sharing analysis).
Switching to a Box<BStr> cuts us from 72 bytes to 64 bytes per
string (and there are a lot of strings!)
Change-Id: I11f34c14a08fa02759f260b1c78b2a2b981714e4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10794
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
NixString is *quite* large - like 80 bytes - because of the extra
capacity value for BString and because of the context. We want to keep
Value small since we're passing it around a lot, so let's box the
NixString inside Value::String to save on some memory, and make cloning
ostensibly a little cheaper
Change-Id: I343c8b4e7f61dc3dcbbaba4382efb3b3e5bbabb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10729
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
C++ nix uses C-style zero-terminated char pointers to represent strings
internally - however, up to this point, tvix has used Rust `String` and
`str` for string values. Since those are required to be valid utf-8, we
haven't been able to properly represent all the string values that Nix
supports.
To fix that, this change converts the internal representation of the
NixString struct from `Box<str>` to `BString`, from the `bstr` crate -
this is a wrapper around a `Vec<u8>` with extra functions for treating
that byte vector as a "morally string-like" value, which is basically
exactly what we need.
Since this changes a pretty fundamental assumption about a pretty core
type, there are a *lot* of changes in a lot of places to make this work,
but I've tried to keep the general philosophy and intent of most of the
code in most places intact. Most notably, there's nothing that's been
done to make the derivation stuff in //tvix/glue work with non-utf8
strings everywhere, instead opting to just convert to String/str when
passing things into that - there *might* be something to be done there,
but I don't know what the rules should be and I don't want to figure
them out in this change.
To deal with OS-native paths in a way that also works in WASM for
tvixbolt, this also adds a dependency on the "os_str_bytes" crate.
Fixes: b/189
Fixes: b/337
Change-Id: I5e6eb29c62f47dd91af954f5e12bfc3d186f5526
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10200
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
|
|
Sometimes, Nix lets someone customize the `name` in the store for a
path, this is the case for `builtins.path` which takes a `name`
argument, we leave it to the caller to choose the name, which can be the
basename by default of the path.
Change-Id: Icdbf71d1d8f2dca5716b99d20aac885aab905b80
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10653
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
|
|
Add multiple additional helpers such as:
- `path_to_name`: derive the basename of a given path
- `derive_nar_ca_path_info`: derive the `PathInfo` for a content
addressed NAR
which isolates further the tree walking feature and the ingestion feature.
Additionally, we don't `expect` anymore and propagate properly ingestion errors up.
Change-Id: I60edb5b633911c58ade7e19f5002e6f75f90e262
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10574
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
|
|
TvixStoreIO triggers builds whenever IO into a not-yet-built store path
is requested, if it knows how to build that path.
Change-Id: If30e9db6be2f2a30cbc9d0576f357f3ecfa0d35a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10645
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
We propagate a `TvixStoreIO` as the `state` of our derivation-specific
builtins in the glue crate.
The evaluators `io_handle` itself is using a Rc<dyn EvalIO>.
An earlier version of TvixStoreIO was also introducing generics over the
different internal services themselves, but we opted for instead
hardcoding this to Arc<dyn …> for the sake of less macro voodoo.
Change-Id: I535c476f06b840858fa3070c4a237ece47f7a15b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10636
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Provide a store_path_to_node_sync function which uses the runtime handle
to block on the async function internally, but make store_path_to_node
itself async, so it can call async functions internally.
We'll use that later when triggering builds and waiting on their
results.
Change-Id: Idae9da7aa5b0878e0d3a2eba34ea2623e1ba84b2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10607
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
