Age | Commit message (Collapse) | Author | Files | Lines |
|
Refactors the update function to take the attribute sets by value
instead.
To facilitate this, we use an equivalent of the currently unstable
`Rc::clone_or_unwrap` in the VM when encountering attribute sets, so
that in cases where the only references to the attrs being updated are
the ones on the stack those clones are avoided completely.
This does make update() a little bit more tricky internally, as some
optimised branches can directly return the moved value, and others
need to destructure with ownership. For this reason there are now two
different match statements handling the different ownership cases.
Change-Id: Ia77d3ba5c86afb75b9f1f51758bda61729ba5aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6279
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Suggestion from grfn in cl/6158.
Change-Id: I16dcf2296a5ec5d299d5a080ca099b8eda6c254e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6278
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
grfn suggested clearer naming for these in cl/6166.
Change-Id: I83164bf1d1902ebd42272e9d5d63819a0f6a72c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6277
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This is no longer needed for anything and the extra clone here is not
really more costly than constructing a blackhole value in a different
place.
Change-Id: I5c63085b1b4418b629ea58a42e3bfe9a9b586d76
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6275
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I758fc4f3b9078de7ca6228a75a4351c3e085c4cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6272
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Without this escape, it is possible for Nix to produce escaped
representations which are not literal Nix values again.
This was fixed in upstream Nix in
https://github.com/NixOS/nix/pull/4012 (though only for eval, not in
the REPL) and the updated test is picked from upstream after that commit.
Because we run the C++ Nix tests against our test suite as well, this
also bumps our custom Nix 2.3 to a commit that includes the
cherry-picked fix from the PR above.
Change-Id: I478547ade65f655c606ec46f7143932064192283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6271
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This struct will carry the upvalue machinery in addition to the lambda
itself. For now, all lambdas are wrapped in closures (though
technically analysis of the environment can later remove innermost
Closure wrapper, but this optimisation may not be worth it).
Change-Id: If2b68549ec1ea4ab838fdc47a2181c694ac937f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6269
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
The blackhole allocation is not going to be cheaper than cloning this.
Change-Id: Id3ad44812decb4392830be06645e67bb0a982b96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6267
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This avoids copying around the value more than needed.
Change-Id: I35949d16dad7fb8f76e0f641eaccf48322144777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6263
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Idf92ac82438fbfcf7b2f6e058830e4744637d8c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6262
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The set of things that can leak out of `builtins` into the global
scope is statically known (it is what Nix 2.3 leaks there,
essentially).
This is a mild change over the previous mechanism, where instead at
the point where the `builtins` set is constructed we "lift" the
globals out of there (if they exist).
This way users will still eventually be able to add additional
builtins, HOWEVER they will not be able to leak them into the global
scope.
Note that upstream Nix technically leaks _all_ builtins into the
global scope using the `__*` prefix, but we are trying to avoid this
in Tvix if it is not required in nixpkgs.
Change-Id: Ie9dec2ce33740134f3b2464eba3749f421dd5953
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6258
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Adds a new builtins module in which builtins can be constructed. The
functions in this module should return a correctly structured value to
be passed to the compiler's `globals`.
This is wired up all the way to the compiler with an example
`toString` builtin, available as a global. Note that this does not yet
actually behave like the real toString, which has some differences
from `Display`.
Change-Id: Ibb5f6fbe6207782fdf2434435567fc1bd80039a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6254
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Builtins are represented as a Rust function pointer that accepts a
vector of arguments, which represents variable arity builtins.
Change-Id: Ibab7e662a646caf1172695d876d2f55e187c03dd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6251
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Changes the internal compiler plumbing to not just return a chunk of
code, but the same chunk wrapped inside of a lambda value.
This is one more step towards compiling runtime lambdas.
Change-Id: If0035f8e65a2970c5ae123fc068a2396e1d8fd72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6240
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Ifa9766f5ffeff99e926936bafd697e885e733b78
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6238
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This starts paving the way for nicer, source-code based error
reporting.
Right now the code paths in the VM do not emit annotated errors, as we
do not yet preserve that structure from the compiler. However, error
emitting code paths in the compiler have been amended to include known
nodes.
Change-Id: I1b74410ffd891c40cd913361bd73c4336ec8aa5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6235
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
These were missing an additional level of escaping, silly oversight
caught by an upstream test.
Change-Id: I0312084475e4b88c83945614e9aa5b34c6bc3ec2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6232
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I2f39122ac85b67837335aab308d845907160e132
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6221
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Nix allows this, but always returns false. Tvix needs to do the same.
Change-Id: Ic9eec90834a0d0969eea5316d5c25032d3691d94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6209
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Not sure how exactly this snuck in, but it caused some subtle
breakages in deeply nested attribute sets.
Change-Id: I8049ce912405d3750031f79cc8d86ff1c3c02c2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6208
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I35741856f34b86a538f226a8eaf8806edede60ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6207
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: If9d9eaf60934e96ec4b41c57818afe0c2a99c862
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6206
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
We're confident that we're handling all branches that can reasonably
occur from valid AST, any other cases should be considered a critical
evaluator bug and panic rather than surfacing something that looks
like user error.
Change-Id: If96966eb32b8ff12fcaeb9ea3b0c8fc51b6abd11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6205
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I3ea0f51475e80948adfeb5d1620c1f2665cc39bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6201
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ia25f02610f2575e5e7fca81643e05b40f4a07820
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6200
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This is actually *tested* behaviour in C++ Nix, so we need to
implement it here, too.
Change-Id: Ic4a4659a2f04cdd928cbe78a85dae90401515371
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6199
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I2f4719a81512a9a970edf22390afed490125bda7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6182
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I4827384201912131ea8fc2362188dcd862b94852
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6181
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
grfn pointed out in cl/6082 that this is actually the desugaring of
the write! macro, so it doesn't make sense to write it out.
Change-Id: If7c055b042ad22b034722aec1eaadba92736d684
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6180
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
For representation wrappers that are used to control the visibility of
type internals, this ensures that the wrapper does not increase the
size of the type.
In practice, the optimiser likely does this anyways but it is good to
guarantee it.
Change-Id: Ic6df7d668fe6006dfbd5b6cfcfc2088afa95b810
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6178
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This sentinel value is going to be used for certain nested accesses
into attribute sets.
There is a new instruction similar to `OpAttrsSelect` which leaves the
sentinel on the stack if a key is not found, instead of raising an
error.
Additionally, a new jump instruction makes its jump operation
conditional on finding such a sentinel value.
Change-Id: I2642f0a0bcc85bbe0ead68ea09a7dd794dbedeac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6166
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The only uses of the static variant were for `"name"` and `"value"`,
which are both small enough to fit into a SmolStr. The size of
NixString accomodates `String` anyways, so we may as well inline them.
Additionally smol_str is already in the dependency graph because rnix
uses it, and using it for representations of identifiers is sensible.
Change-Id: I9969312256d1657d69128e54c47dc7294a18ce58
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6165
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Having these visible more explicitly is useful while debugging.
Change-Id: I86b497883063d32792b635eb4514b7aeae484af4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6164
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Fairly straightforward, handling the optimised representations
manually and otherwise delegating to BTreeMap.
Note that parsing of raw identifiers is not yet implemented.
Encountering an identifier node usually means that there is locals
access going on, so we need a special case for compiling a node in
such a way that an identifier's literal value ends up on the stack.
Change-Id: I13fbab7ac657b17ef3f4c5859fe737c321890c8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6158
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This operation is required because both sides of the logical operators
are strictly evaluated by Nix, even if the resulting value is not used
further.
For example, in our implementation of `&&`, if the left-hand side is
`true`, then the result of the expression is simply the right-hand
side value. This value must be asserted to be a boolean for the
semantics of the language to work correctly.
Change-Id: I34f5364f2a444753fa1d8b0a1a2b2d9cdf7c6700
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6157
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
These expressions use simple jumps to skip the correct expression
conditionally in the bytecode by advancing the instruction pointer.
Note that these expressions are already covered by a test behind the
`nix_tests` feature flag, but adding more is probably sensible.
Change-Id: Ibe0eba95d216321c883d3b6b5816e2ab6fe7eef1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6148
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Wraps the string representation in an additional newtype struct with a
private field in order to hide the representation from other modules.
This is done in order to avoid accidental leakage of the internals
outside of value::string.
In fact, this caught a mistake in the compiler module which was
directly constructing an internal variant.
Change-Id: If4b627d3cff7ab9cd50ca1a3ac73245d4dcf7aef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6147
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Wraps the attrs representation in an additional newtype struct with a
private field in order to hide the representation from other modules.
This is done in order to avoid accidental leakage of the internals
outside of value::attrs.
Change-Id: I68d1d02514aa0443df4c39801001a3f1f6cc5d5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6146
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Ensuring that the implementation is not leaking out of the module lets
us keep things open for optimisations (e.g. empty list or pairs
through tuples).
Change-Id: I18fd9b7740f28c55736471e16c6b4095a05dd6d0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6145
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Icdf715d116371a9f139bdf95266410bf967bef25
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6144
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The underlying implementation does a few tricks based on which pair of
attrset representations is encountered.
Particularly the effect of short-circuiting the empty cases might be
relevant in nixpkgs/NixOS, due to the use of lib.optionalAttrs.
Change-Id: I22b978b1c69af12926489a71087c6a6219c012f3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6140
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
I assumed that `Ord` is a marker trait like `Eq`, but it actually has
a member. Without this ordering was incoherent.
Change-Id: Id37cbdf333daf748d29b85243046c7e061b1ce29
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6139
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I1b97cf5a9e4e235fac72a507de49a8df508bcaa1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6138
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: If61066e59232b2bad42b5cb5f0f2d9b9c416be8b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6137
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Nix displays a maximum of 5 digits for floating points.
Change-Id: Ifa3c0d96fa0b24e3be8f94dfebc99e602a258355
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6133
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Displaying the optimised representation is not useful anymore.
Change-Id: Icb962ff8865ec4207c144fbcb1aae87483b0fb7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6131
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
When printing strings as identifiers (in attribute sets), the string
should only be quoted and escaped if it contains escape characters.
Change-Id: If2bcfa1e93dc8f00be4d7a57ec1d82fc679103c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6127
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
Nix strings displayed to users must be escaped the same way as they
are in C++ Nix. This adds the scaffolding for escapes, but is most
likely not yet complete.
Change-Id: Icfdcb2ac98d292c567ba894a92b6529a53e0cc17
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6124
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Instead of comparing the enum variants (which does not yield useful
behaviour), compare &str representations of the string instead.
Change-Id: I5e94b5f6c91b4561e1bc7c36d586f3d23c243764
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6112
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
|
|
For cases where the strings are statically known (such as the
oft-occuring name/value), this can be a useful optimisation.
It's also much more convenient in tests.
Change-Id: Ie462b684805bd4986ea5e85ca4bff663bc2d3c3c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6111
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
|