| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This drops the usage of serde::Serialize, as the trait can not be used
to implement the correct semantics (function colouring!).
Instead, a manual JSON serialisation function is written which
correctly handles toString, outPath and other similar weirdnesses.
Unexpectedly, the eval-okay-tojson test from the C++ Nix test suite
now passes, too.
This fixes an issue where serialising data structures containing
derivations to JSON would fail.
Change-Id: I5c39e3d8356ee93a07eda481410f88610f6dd9f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8209
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
It turns out that this is used not just in coerceToString, but also in
toJSON.
Change-Id: I1c324b115a0b8bb6d83446d5bf70453c9b90685e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8203
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Instead of the two different representations (which we don't really
use much), use a `Box<str>` (which potentially shaves another 8 bytes
off `Value`).
NixString values themselves are immutable anyways (which was a
guarantee we already had with `SmolStr`), so this doesn't change
anything else.
Change-Id: I1d8454c056c21ecb0aebc473cfb3ae06cd70dbb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8151
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Warning: This is probably the biggest refactor in tvix-eval history,
so far.
This replaces all instances of trampolines and recursion during
evaluation of the VM loop with generators. A generator is an
asynchronous function that can be suspended to yield a message (in our
case, vm::generators::GeneratorRequest) and receive a
response (vm::generators::GeneratorResponsee).
The `genawaiter` crate provides an interpreter for generators that can
drive their execution and lets us move control flow between the VM and
suspended generators.
To do this, massive changes have occured basically everywhere in the
code. On a high-level:
1. The VM is now organised around a frame stack. A frame is either a
call frame (execution of Tvix bytecode) or a generator frame (a
running or suspended generator).
The VM has an outer loop that pops a frame off the frame stack, and
then enters an inner loop either driving the execution of the
bytecode or the execution of a generator.
Both types of frames have several branches that can result in the
frame re-enqueuing itself, and enqueuing some other work (in the
form of a different frame) on top of itself. The VM will eventually
resume the frame when everything "above" it has been suspended.
In this way, the VM's new frame stack takes over much of the work
that was previously achieved by recursion.
2. All methods previously taking a VM have been refactored into async
functions that instead emit/receive generator messages for
communication with the VM.
Notably, this includes *all* builtins.
This has had some other effects:
- Some test have been removed or commented out, either because they
tested code that was mostly already dead (nix_eq) or because they
now require generator scaffolding which we do not have in place for
tests (yet).
- Because generator functions are technically async (though no async
IO is involved), we lose the ability to use much of the Rust
standard library e.g. in builtins. This has led to many algorithms
being unrolled into iterative versions instead of iterator
combinations, and things like sorting had to be implemented from scratch.
- Many call sites that previously saw a `Result<..., ErrorKind>`
bubble up now only see the result value, as the error handling is
encapsulated within the generator loop.
This reduces number of places inside of builtin implementations
where error context can be attached to calls that can fail.
Currently what we gain in this tradeoff is significantly more
detailed span information (which we still need to bubble up, this
commit does not change the error display).
We'll need to do some analysis later of how useful the errors turn
out to be and potentially introduce some methods for attaching
context to a generator frame again.
This change is very difficult to do in stages, as it is very much an
"all or nothing" change that affects huge parts of the codebase. I've
tried to isolate changes that can be isolated into the parent CLs of
this one, but this change is still quite difficult to wrap one's mind
and I'm available to discuss it and explain things to any reviewer.
Fixes: b/238, b/237, b/251 and potentially others.
Change-Id: I39244163ff5bbecd169fe7b274df19262b515699
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8104
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
|
|
Again simplifying some code down the line, where bits of code that
construct attribute sets already have the final structure available.
Change-Id: I0bb7a1daa63298122b51be73d35d695a4f73f8b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8140
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
Change-Id: Ifb59ef148ea4fab613f2e4efb133c04baafa3a98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8141
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Instead of going through Vec/BTreeMap for generating our internal
types, use the proptest strategies from imbl.
The one thing I couldn't figure out in the previous implementation is
where the ranges/sizes of generated collections came from. The
strategies in proptest use different types (Range, with an unknown
default value, and SizeRange with 0..100). I've opted to specify
0..100 directly, but we can probably make it configurable.
Change-Id: I749bc4c703fe424099240cab822b1642e5216361
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7791
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This CL addresses clippy warning len_without_is_empty
which expects `.is_empty()` method to be present when
implementing `.len()` method for an item.
Change-Id: I8878db630b9ef5853649a906b764a33299bb5dc8
Signed-off-by: Aaqa Ishtyaq <aaqaishtyaq@gmail.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7806
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Implements `Serialize` for `tvix_eval::Value`. Special care is taken
with serialisation of attribute sets, and forcing of thunks.
The tests should cover both cases well.
Change-Id: I9bb135bacf6f87bc6bd0bd88cef0a42308e6c335
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7803
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
|
|
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Ib6f7d1f4f4faac36b44f5f75cccc57bf912cf606
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7626
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
The `im::OrdMap` is already small and cheap to copy while sharing
memory, so this is not required anymore.
Only the `KV` variant may have slightly larger content, but in
practice this doesn't seem to make a difference when comparing the two
variants and this one is less complicated.
Change-Id: I64a563b209a2444125653777551373cb2989ca7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7677
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This uses the `im::OrdMap` for `NixAttrs` to enable sharing of memory
between different iterations of a map.
This slightly speeds up eval, but not significantly. Future work might
include benchmarking whether using a `HashMap` and only ordering in
cases where order is actually required would help.
This switches to a fork of `im` that fixes some bugs with its OrdMap
implementation.
Change-Id: I2f6a5ff471b6d508c1e8a98b13f889f49c0d9537
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7676
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
It's been a while since the last time, so quite a lot of stuff has
accumulated here.
Change-Id: I0762827c197b30a917ff470fd8ae8f220f6ba247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7597
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Fixes b/212. Based on feedback in https://cl.tvl.fyi/c/depot/+/7492, all
uses of `NixAttrs::from_map` have been removed. Only `from_iter` and
`from_kv` remain.
Change-Id: I52e25f73018c2aa1843197427516b7a852503e2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7500
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: IslandUsurper <lyle@menteeth.us>
|
|
Allows for the removal of some BTreeMap usage when constructing NixAttrs
by allowing any iterator over 2-tuples to build a NixAttrs. Some
instances of BTreeMap didn't have anything to do with making NixAttrs,
and some were just the best tool for the job, so they are left using the
old `from_map` interface.
Change-Id: I668ea600b0d93eae700a6b1861ac84502c968d78
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7492
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I3a55413e5004777b90c06cd8655f26abb2faf39b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7448
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ia373eb30d8516a056f1349f9011dee9816593d6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7357
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ib813d794177c623bf2f12fc2e6a6f304089607d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7356
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: Idd4ae78ef55891d89b72b5c2f3afc8b697b4b26e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7189
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
|
|
It isn't possible to implement PartialEq properly for Value, because
any sensible implementation needs to force() thunks, which cannot be
done without a `&mut VM`.
The existing derive(PartialEq) has false negatives, which caused the
bug which cl/7142 fixed. Fortunately that bug was easy to find, but
a silent false negative deep within the bowels of nixpkgs could be a
real nightmare to hunt down.
Let's just remove the PartialEq impl for Value, and the other
derive(PartialEq)'s that depend on it.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Iacd3726fefc7fc1edadcd7e9b586e04cf8466775
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7144
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
I assumed that AttrsRep::KV represented attrsets with a single
attribute as a Key-Value pair. That is not the case. Let's warn
other people about this.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ie3d2765fcc1ab705c153ab94ffe77bbd6d4ab39e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7093
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
I played around a little bit with doing this in-place, but ended up
going with this perhaps slightly clone-heavy approach for now because
ideally most clones on Value are cheap - but later we should benchmark
alternate approaches that get to reuse allocations better if necessary
or possible.
Change-Id: If998eb2056cedefdf2fb480b0568ac8329ccfc44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7068
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Using the same method as in Thunk::deep_force, detect cycles when
printing values by maintaining a set of already seen thunks.
With this, display of infinite values matches that of Nix:
> nix-instantiate --eval --strict -E 'let as = { x = 123; y = as; }; in as'
{ x = 123; y = { x = 123; y = <CYCLE>; }; }
> tvix-eval -E 'let as = { x = 123; y = as; }; in as'
=> { x = 123; y = { x = 123; y = <CYCLE>; }; } :: set
Change-Id: I007b918d5131d82c28884e46e46ff365ef691aa8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7056
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Now that we're tracking formals on Lambda this ends up being quite easy;
we just pull them off of the Lambda for the argument closure and use
them to construct the result attribute set.
Change-Id: I811cb61ec34c6bef123a4043000b18c0e4ea0125
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7003
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Validate "closed formals" (formal parameters without an ellipsis) via a
new ValidateClosedFormals op, which checks the arguments (in an attr set
at the top of the stack) against the formal parameters on the Lambda in
the current frame, and returns a new UnexpectedArgument error (including
the span of the formals themselves!!) if any arguments aren't allowed
Change-Id: Idcc47a59167a83be1832a6229f137d84e426c56c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7002
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Using `serde_json` for parsing JSON here, plus an `impl FromJSON for
Value`. The latter is primarily to stay "dependency light" for now -
likely going with an actual serde `Deserialize` impl in the future is
going to be way better as it allows saving significantly on intermediary
allocations.
Change-Id: I152a0448ff7c87cf7ebaac927c38912b99de1c18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6920
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This implementation, which only ever worked for non-recursive
attribute sets, is no longer needed and thus removed here.
We have a new implementation of these nested keys coming up instead.
Change-Id: I0c2875154026a4f5f6e0aa038e465f54444bf721
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6783
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Pass in, but ignore, a mutable reference to the VM to the `nix_eq`
functions, in preparation for using that VM to force thunks during
comparison.
Change-Id: I565435d8dfb33768f930fdb5a6b0fb1365d7e161
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6651
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Using rust's PartialEq trait to implement Nix equality semantics is
reasonably fraught with peril, both because the actual laws are
different than what nix expects, and (more importantly) because certain
things actually require extra context to compare for equality (for
example, thunks need to be forced). This converts the manual PartialEq
impl for Value (and all its descendants) to a *derived* PartialEq
impl (which requires a lot of extra PartialEq derives on miscellanious
other types within the codebase), and converts the previous
nix-semantics equality comparison into a new `nix_eq` method. This
returns an EvalResult, even though it can't currently return an error,
to allow it to fail when eg forcing thunks (which it will do soon).
Since the PartialEq impls for Value and NixAttrs are now quite boring,
this converts the generated proptests for those into handwritten ones
that cover `nix_eq` instead
Change-Id: If3da7171f88c22eda5b7a60030d8b00c3b76f672
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6650
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Impl Arbitrary for Value (and NixAttrs and NixList) in the same way we
did for NixString. Value currently only generates non-"internal"
values (no thunks, AttrNotFound, etc.) and can't generate
functions (builtins or closures), because those'd require full
generation of tvix bytecode, which is a bit more work than I'd like to
do now - there's a `todo!` left in the code for a place where we could
allow opting-in to internal values and functions later.
Change-Id: I07a59e2b1d89cfaa912d4ecebd642caf4ddb040a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6627
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Define `.len()` method on `NixAttrs` to preallocate the capacity of the result
vector.
Also anchor an errant comment to its context (I think).
Change-Id: I268f15025d453d7b3ae1146558c80e51433dd2a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6546
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
|
|
This very closely follows the way it's done for warnings, but errors
have a lot more information available in some cases which we do not
surface yet.
Note also that due to requiring the `CodeMap`, this is not yet called
from eval.rs as the way that is threaded through needs to be
refactored, so only the method for reporting these errors as strings
is implemented so far.
Next steps for this will be to add a generic diagnostics module that
reduces some of the boilerplate for this between warnings & errors,
and which will also give us a good point in the future to switch to a
fancier diagnostics crate.
Change-Id: If6bb209f8e7a568d866e516a90335b9b2afbf66d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6534
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
As pointed out by sterni in cl/6205, this is actually possible in
syntactically valid expressions like
{ ${12 + 13} = 12; }
Change-Id: Id8a1e3aceb551f288f9050c4eea563eb6572f1a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
As pointed out by grfn on cl/6091
Change-Id: I28308577b7cf99dffb4a4fd3cc8783eb9ab4d0d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6460
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Note that I've allowed `needless_lifetimes` for the attribute set
iterator, as I find the type easier to understand with these
annotations present.
Change-Id: I33abb17837ee4813076cdb9a87f54bac4a37044e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6373
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Implementing iteration over NixAttrs requires a custom iterator type
in order to encapsulate the different representations. The BTreeMap
for example has its own iterator type which needs to be encapsulated.
This is mostly boilerplate code, but for a change some simple unit
tests have been added in.
Change-Id: Ie13b063241d461b810876f95f53878388e918ef2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6367
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Refactors the update function to take the attribute sets by value
instead.
To facilitate this, we use an equivalent of the currently unstable
`Rc::clone_or_unwrap` in the VM when encountering attribute sets, so
that in cases where the only references to the attrs being updated are
the ones on the stack those clones are avoided completely.
This does make update() a little bit more tricky internally, as some
optimised branches can directly return the moved value, and others
need to destructure with ownership. For this reason there are now two
different match statements handling the different ownership cases.
Change-Id: Ia77d3ba5c86afb75b9f1f51758bda61729ba5aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6279
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Suggestion from grfn in cl/6158.
Change-Id: I16dcf2296a5ec5d299d5a080ca099b8eda6c254e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6278
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This is no longer needed for anything and the extra clone here is not
really more costly than constructing a blackhole value in a different
place.
Change-Id: I5c63085b1b4418b629ea58a42e3bfe9a9b586d76
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6275
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I758fc4f3b9078de7ca6228a75a4351c3e085c4cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6272
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
The blackhole allocation is not going to be cheaper than cloning this.
Change-Id: Id3ad44812decb4392830be06645e67bb0a982b96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6267
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This avoids copying around the value more than needed.
Change-Id: I35949d16dad7fb8f76e0f641eaccf48322144777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6263
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The set of things that can leak out of `builtins` into the global
scope is statically known (it is what Nix 2.3 leaks there,
essentially).
This is a mild change over the previous mechanism, where instead at
the point where the `builtins` set is constructed we "lift" the
globals out of there (if they exist).
This way users will still eventually be able to add additional
builtins, HOWEVER they will not be able to leak them into the global
scope.
Note that upstream Nix technically leaks _all_ builtins into the
global scope using the `__*` prefix, but we are trying to avoid this
in Tvix if it is not required in nixpkgs.
Change-Id: Ie9dec2ce33740134f3b2464eba3749f421dd5953
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6258
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This starts paving the way for nicer, source-code based error
reporting.
Right now the code paths in the VM do not emit annotated errors, as we
do not yet preserve that structure from the compiler. However, error
emitting code paths in the compiler have been amended to include known
nodes.
Change-Id: I1b74410ffd891c40cd913361bd73c4336ec8aa5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6235
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Not sure how exactly this snuck in, but it caused some subtle
breakages in deeply nested attribute sets.
Change-Id: I8049ce912405d3750031f79cc8d86ff1c3c02c2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6208
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I35741856f34b86a538f226a8eaf8806edede60ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6207
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: If9d9eaf60934e96ec4b41c57818afe0c2a99c862
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6206
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
We're confident that we're handling all branches that can reasonably
occur from valid AST, any other cases should be considered a critical
evaluator bug and panic rather than surfacing something that looks
like user error.
Change-Id: If96966eb32b8ff12fcaeb9ea3b0c8fc51b6abd11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6205
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I3ea0f51475e80948adfeb5d1620c1f2665cc39bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6201
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
