Age | Commit message (Collapse) | Author | Files | Lines |
|
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This drops pretty much all of castore/utils.rs.
There were only two things left in there, both a bit messy and only used
for tests:
Some `gen_*_service()` helper functions. These can be expressed by
`from_addr("memory://")`.
The other thing was some plumbing code to test the gRPC layer, by
exposing a in-memory implementation via gRPC, and then connecting to
that channel via a gRPC client again.
Previous CLs moved the connection setup code to
{directory,blob}service::tests::utils, close to where we exercise them,
the new rstest-based tests.
The tests interacting directly on the gRPC types are removed, all
scenarios that were in there show now be covered through the rstest ones
on the trait level.
Change-Id: I450ccccf983b4c62145a25d81c36a40846664814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11223
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
This greatly simplifies the code in this function, replacing it with a
much better tested (and more capable!) version of the validation logic.
It also enables the gRPC server frontend to make use of the
DirectoryPutter interface. While this might not be too visible in terms
of latency thanks to gRPC streams bursting, it also enables further
optimizations later (such as bucketing of directory closures).
Change-Id: I21f805aa72377dd5266de3b525905d9f445337d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11221
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Change-Id: I5f39d0e613b651458b168cfd9df0693d7f01d704
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11246
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
This allows these messages to be put in HashSets.
Change-Id: Ia58094cafe53eb624578821d3d8d969c5d21a1d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11219
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
|
|
This only contains the outer metadata wrapping, and that's not too interesting:
> Request { metadata: MetadataMap { headers: {"content-type":
> "application/grpc", "user-agent": "grpc-go/1.60.1", "te": "trailers",
> "grpc-accept-encoding": "gzip"} }, message: Streaming, extensions:
> Extensions }
Drop these fields for now, and rely on the underlying implementations to
add instrumentation for the application-specific fields.
Clean up the error logging a bit.
Change-Id: Ife1090ed411766a61e1fa60fd4c9570f38de1e98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11102
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
This only contains the outer metadata wrapping, and that's not too interesting:
> Request { metadata: MetadataMap { headers: {"content-type":
> "application/grpc", "user-agent": "grpc-go/1.60.1", "te": "trailers",
> "grpc-accept-encoding": "gzip"} }, message: Streaming, extensions:
> Extensions }
Drop these fields for now, and rely on the underlying implementations to
add instrumentation for the application-specific fields.
Log errors in some places where we didn't so far.
Change-Id: Ia68d6c526987d3716be62a0809195401cf28512b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11101
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
|
|
The Stat() method was just always signalling no granular chunks are
available. However, as we now have a .chunks() method, we can expose it
over gRPC.
Change-Id: I74f0890ae083f301bb0cec62f1ea4a95463ac590
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10736
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
All chunks must have valid blake3 digests. It is allowed to send an
empty list, if no more granular chunking is available.
Change-Id: I7ecb53579cdf40fd938bb68a85685751b4d3626f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10726
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
|
|
This can be written without the additional function.
Change-Id: Ib11c5d5254d3e44c8fa9661414835b0622eb1ac4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10735
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
The BoxStream type alias is a more concise and easier to read than
the full `Pin<Box<dyn Stream<Item = ...> + Send + ...>>` type.
Change-Id: I5b7bccfd066ded5557e01f7895f4cf5c4a33bd44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10677
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
|
|
- Adjust to ecl 23.9.9 release
- Regenerate go protos after protoc-gen-go update
- Drop dhall fork which hasn't kept up with 1.42.*
- Address new clippy warnings:
- Variant naming of Error::ValidationError
- Simplify .try_into().unwrap()
- Drop unnecessary identity function
- Test module must be last in file
- Drop unused `pub use`
- Update agenix to 0.15.0. Current master has a installCheckPhase that
doesn't work with C++ Nix 2.3.*:
https://github.com/ryantm/agenix/commit/a23aa271bec82d3e962bafb994595c1c4a62b133#commitcomment-137185861
Change-Id: Ic29eef20d6fd1362ce1031364a5ca6b4edf195bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10615
Reviewed-by: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
This allows assembling BTreeSets of node::Node.
Change-Id: I97b83be5ffc3e891307a8ef2b5fc31e38b747a62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10625
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
|
|
Extend our validation function to also check for the None case.
Change-Id: Ib75f880646d7fb3d66588f1988e61ec18be816a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10534
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
|
|
Change-Id: I9655f5588c7dc98427de6af47d74b4ab7ce22071
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10516
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
We can also drop the Clone requirement. Because the trait is async since
some time, there's no need to clone before moving into an async closure,
allowing us to simplify the code a bit.
Change-Id: I9b0a0e10077d8c548d218207b908bfd92c5b8de0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10515
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
|
|
Not a single call site actually makes use of the Vec.
Change-Id: I6cf31073c9f443d1702a21937a0c3938c2c643b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9988
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
This pdates the proto docstrings a bit, especially w.r.t. verified
streaming.
It also adds send_chunks, send_bao fields to StatBlobRequest (renamed
from BlobMeta)
Change-Id: I590cc8646d86b73bca9f38a9b6d9ea15e4df5cb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9951
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
Having more than 4GiB files is quite possible (think about the NixOS
graphical installer, and an uncompressed iso of it).
No wire format changes.
Change-Id: Ia78a07e4c554e91b93c5b9f8533266e4bd7f22b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9950
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: Ica288e94f3f6025d98ef7d56dc5d6f874ec921b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9861
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: Iad4f2cb4aa92b5bb29ead6050348a8cd3e7b8632
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9860
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Change-Id: I3bea0827ec2c8db835334ce378a7bf3a39e9b1a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9849
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Change-Id: I8a792d6b238190a78390c5d8f638669a2681f70f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9746
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
We can just check the digest length to be correct, and move the symlink
target checks to a single line.
Change-Id: I41d2e3a50e7990ef6c04f02acd754b1e17b43e77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9717
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|
|
Implement `validate()` on `node::Node`, and call it from PathInfo's
validate() too. Node-related errors are moved to a ValidateNodeError
error type.
This additionally adds some more validations for symlink targets (they
must not be empty, and not contain null bytes).
Change-Id: Ib9b89f1c9c795e868a1533281239bc8a36d97c5d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9715
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
|
|
Much friendlier than either Base64 or raw byte slices.
Change-Id: I9b4cdd57c83ddc76c0be8103da4320207657a72b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9622
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
We use checked arithmetic for computing the total size, and verify
that size is in-bounds in Directory::validate.
If an out-of-bounds size makes it to the "unchecked" size method,
we either panic (in debug mode), or silently saturate to u32::MAX.
No new panic sites are added, since overflows in debug mode already
panic at the language level.
Change-Id: I95b8c066a42614fa447f08b4f8fe74e16fbe8bf9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9616
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
|
|
Change-Id: Iebfa12df51c8c9d39b4d9eb2fccc6ffa312639cd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9620
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
|
|
Similar to gen_directorysvc_grpc_client, introduce a
gen_blobsvc_grpc_client function that provides a gRPC client connected
to a blobservice.
The test is update to use that client to test against, rather than the
server trait, removing the last usage of tonic_mock, so it's removed
as well.
Fixes b/243.
Change-Id: If746e8600588da247eb53a63b70fe72f139e9e77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9564
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
|
|
We can use DuplexStream to create to bidirectional pairs, which avoids
manually waiting for unix sockets to pop up and connect, and creating
temporary directoires to create the unix sockets in.
Turns out, we also don't actually need to spawn the server in a separate
runtime, it works just fine these days. This might be due to all the
sync barriers in between being gone.
Change-Id: I6b79823bc6209cbcb343b7a498c64a2ba6e0aee7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9562
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
The tests were using the gRPC Service/Server interface, not the gRPC
clients.
Use our new gen_directorysvc_grpc_client() function to spin up a server
in a separate thread, and test via that client, rather than *just* the
server implementation.
This is more correct, because we're now really exercising the gRPC
stack, and some of the stream implementations are also only implemented
on the client.
Change-Id: I99434a2399856a44c9e6988d0b720f7a429d0ad1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9560
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
|
|
- rename the feature to `tonic-reflection` in both tvix-store and tvix-
castore.
- set it to disabled in tvix-castore by default
- enable it in tvix-store, and pull in tvix-castore with the feature
enabled.
Change-Id: Ie22833d85569502cae55812f6eeb17a9c15b9e2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9472
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
|
|
This splits the pure content-addressed layers from tvix-store into a
`castore` crate, and only leaves PathInfo related things, as well as the
CLI entrypoint in the tvix-store crate.
Notable changes:
- `fixtures` and `utils` had to be moved out of the `test` cfg, so they
can be imported from tvix-store.
- Some ad-hoc fixtures in the test were moved to proper fixtures in the
same step.
- The protos are now created by a (more static) recipe in the protos/
directory.
The (now two) golang targets are commented out, as it's not possible to
update them properly in the same CL. This will be done by a followup CL
once this is merged (and whitby deployed)
Bug: https://b.tvl.fyi/issues/301
Change-Id: I8d675d4bf1fb697eb7d479747c1b1e3635718107
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9370
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
|