about summary refs log tree commit diff
path: root/third_party
AgeCommit message (Collapse)AuthorFilesLines
2023-05-09 r/6128 fix(3p/lisp/mime4cl): use OTHERWISE in CASE not Tsterni1-1/+1
Change-Id: Ia674705b27fbc4ae3055973eec563b078a4a873c Reviewed-on: https://cl.tvl.fyi/c/depot/+/8558 Reviewed-by: sterni <sternenseemann@systemli.org> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-05-09 r/6127 fix(3p/lisp/mime4cl/tests): fix sample discovery in nix buildsterni1-1/+1
CL's path handling strikes once again… Change-Id: I4345941c8e2856f80cfddecc5356464f92b1a150 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8557 Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: sterni <sternenseemann@systemli.org>
2023-05-09 r/6126 refactor(3p/lisp/mime4cl): drop unused split-multipart-partssterni1-28/+0
Change-Id: If47a8ffde5b4910f6c52fe82a2372431a0e46045 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8556 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: sterni <sternenseemann@systemli.org>
2023-05-09 r/6125 refactor(3p/lisp/mime4cl): rename :stream to :underlying-streamsterni2-11/+12
This makes sure that initializing coder-stream-mixin (for the most part) has the same interface as initializing qbase64:decode-stream. This will make integrating that as a faster replacement to mime4cl:base64-decoder-stream a bit easier. The idea is to replace the char by char base64 decoder with one that supports read-sequence. After that deliminited-input-stream needs to gain support for read-sequence as well, so we can actually take advantage of this fact. Finally, we'll have to evaluate the remaining decoders and think about switching the (base64) encoders over as well. Change-Id: If971da02437506e00a7c9fab2b94efc42725e62d Reviewed-on: https://cl.tvl.fyi/c/depot/+/8555 Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org>
2023-05-01 r/6122 refactor(3p/lisp/mime4cl): unify test mechanism for sample msgssterni3-17/+4
For whatever reason, there were two sort of identical tests, mime.1 and mime.2, in the mime4cl test suite: The former tested *sample1-file* and the latter all messages *samples-directory*—in the same way, parsing the original and a re-rendered version of the message to check if they were equal. We can just move sample1.msg into *samples-directory*, get rid of *sample1-file* and thus pave the way for more test messages in the future. Change-Id: I843be331682b731af6ae02a4648ba1c64aaf59a5 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8546 Reviewed-by: sterni <sternenseemann@systemli.org> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-04-29 r/6119 fix(3p/lisp/mime4cl): correctly define find-mime-text-partsterni1-1/+1
The generic function itself needs to be defined using defgeneric, defmethod is used for a defining method of a generic function, i.e. how it should behave when confronted with a certain class. Change-Id: Idd38afa02b56c5002e215decfff7f0c25267eab5 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8532 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-04-26 r/6114 chore(3p/nixpkgs): ntfy builds in unstable againsterni1-3/+0
Change-Id: Ibeb3a8bc568cef336be2e70d071fd9e84a479788 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8528 Tested-by: BuildkiteCI Reviewed-by: flokli <flokli@flokli.de> Autosubmit: sterni <sternenseemann@systemli.org>
2023-04-26 r/6113 refactor(3p/gerrit*): make deps tarball a subtargetsterni1-0/+2
This should make the canon pipeline gcroot the deps tarball, making it less likely to be garbage-collected and rebuilt unnecessarily (which usually incurs a hash change due to impurities). Change-Id: I92a353d0f45056fffbc016c44a1ae05a63d76849 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8527 Tested-by: BuildkiteCI Reviewed-by: flokli <flokli@flokli.de> Autosubmit: sterni <sternenseemann@systemli.org>
2023-04-26 r/6112 chore(3p/sources): Bump channels & overlayssterni3-19/+23
* //3p/sources: Note that emacs-overlay is not updated for now, as changes in emacs HEAD break //users/sterni/emacs. * //3p/gerrit_plugins/code-owners: deps hash changed once again or was no longer in the Nix store. Unfortunately, building the deps derivations from scratch for gerrit and the gerrit plugins no longer works due to a nixpkgs regression: Due to a (operator precedence) mistake in the way the deps derivation's installPhase is computed, it would append extra code to the installPhase provided by us, causing a bash syntax error. I have proposed a fix for this upstream (<https://github.com/NixOS/nixpkgs/pull/228305>). Adding a workaround in the repo would be possible, but a bit annoying. Since the derivations are fixed output anyways, I've opted to build the missing deps derivation (for code-owners) locally using the fixed nixpkgs, updated the sha256 and copied the result into whitby's Nix store. Hopefully by the next time we'll be rebuilding the deps derivations again the fix will have propagated into the NixOS unstable channel. * //users/grfn/system/system:roswellSystem: Use mysql80 from stable. See also https://github.com/NixOS/nixpkgs/issues/226673. Change-Id: I9b9d57f589be4cdc3fd4f39729c170a25a655b74 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8483 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: flokli <flokli@flokli.de> Tested-by: BuildkiteCI
2023-04-10 r/6089 chore(3p/sources): move off these cursed commitsVincent Ambo1-15/+15
Update all sources, hopefully we get a less cursed nixpkgs commit than the last one. Change-Id: I86ecd572225520e99e340373ea219c96fa2fc758 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8474 Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Autosubmit: tazjin <tazjin@tvl.su>
2023-04-09 r/6087 chore(3p/sources): Bump channels & overlayssterni4-21/+21
* //3p/gerrit{,_plugins}: adjust for API change to buildBazelPackage https://github.com/NixOS/nixpkgs/commit/440b4de588d950e7fcf7add3b049fb209f097367 * //3p/gerrit_plugins: update hash of deps jar Change-Id: I131d5846acbce718126fb47671893a568d1020dd Reviewed-on: https://cl.tvl.fyi/c/depot/+/8445 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2023-04-07 r/6072 chore(3p/sources): Bump channels & overlayssterni2-13/+13
* Satisfy new assert that the corresponding shell needs to be enabled via programs.* if it is as the login shell of at least one user. * //users/tazjin: “Address” removal of hardware.video.hidpi option. * //3p/gerrit: update fetch sha256 Change-Id: Id0988a0ea7f393d6b7848a7104fc3526ee1177f4 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8407 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2023-03-30 r/6063 refactor(3p/lisp/mime4cl): replace babel with flexi-streamssterni3-7/+5
decode-RFC2047 used babel's octets-to-string, but we can replace it with the function of the same name from flexi-streams. This doesn't make a difference for the moment, but will be useful in the future: flexi-streams provides de- and encoding streams that we'll be able to use to replace and augment some of the stream based MIME part handling code in mime4cl. babel doesn't have as powerful stream functionality although it seems to be planned. Another big upside of flexi-streams is that we'll be able to replace delimited-input-string using it. This should allow us to slowly work towards correct and more efficient decoding of MIME bodies. Change-Id: I17174f1c96c5be7d103d396564e6aa0fe24c80fc Reviewed-on: https://cl.tvl.fyi/c/depot/+/8371 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: sterni <sternenseemann@systemli.org>
2023-03-27 r/6049 chore(3p/sources): bump home-managersterni1-3/+3
Previously there was an issue in nmd which prevents it from working with Nix 2.3 (it passed --store dummy://) which is why we hadn't updated home-manager for a while. home-manager has now [included] the [fix] for nmd I proposed, so we can finally update! [fix]: https://git.sr.ht/~rycee/nmd/commit/f5a18594255866342ace46827c390c36875337e5 [included]: https://github.com/nix-community/home-manager/commit/db37c537603d1d45d022cc0666ad45197455b364 Change-Id: Ia1447549c0f97aa754ac1842eb453e95838c00c5 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8346 Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su>
2023-03-27 r/6048 chore(3p/sources): Bump channels & overlayssterni2-12/+13
* //users/wpcarro/avaSystem: disable hidpi Recent changes have made nixpkgs adopt the position that hidpi optimization can't be done generically and at the very least needs to know a specific DPI number to optimize for. In addition to knowledge of the display(s) in question (i.e. wpcarro needs to do this) the issue <https://github.com/NixOS/nixpkgs/issues/222805> can give guidance as to how to restore the desired hidpi look and feel. Change-Id: Ia4b079a06dcb710050619f350cd0655216b4a42f Reviewed-on: https://cl.tvl.fyi/c/depot/+/8345 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: wpcarro <wpcarro@gmail.com> Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2023-03-21 r/6029 chore(3p/sources): Bump channels & overlayssterni2-15/+15
* //users/wpcarro/emacs: use top level (ELPA) version of eglot, as it was removed from MELPA: https://github.com/melpa/melpa/commit/dc2ead17a8e5d5df59fc3729c8f0435cfcbf55ef * //3p/nixpkgs:tdlib: 1.8.11 -> 1.8.12 * //tvix/store: regenerate protos after buf update Change-Id: I782a8d91fda5ed461788055a3721104e8c032207 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8327 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: flokli <flokli@flokli.de> Tested-by: BuildkiteCI Reviewed-by: wpcarro <wpcarro@gmail.com> Reviewed-by: tazjin <tazjin@tvl.su> Reviewed-by: sterni <sternenseemann@systemli.org>
2023-03-07 r/5897 chore(3p/sources): Bump channels & overlayssterni1-16/+16
* //3p/sources/nixpkgs: switch back to nixos-unstable Change-Id: I68ab0796afe090abcc0fe7eac9fafb880350bd83 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8225 Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-03-07 r/5896 fix(3p/overlays/tvl): use our patched Nix 2.3 for nix-servesterni1-1/+1
This should avoid having two builds of Nix 2.3 in the closure of whitby and sanduny. Change-Id: Id4b8d34da73d3f579c97adcda44df26992290764 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8192 Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-03-07 r/5895 chore(3p/josh): update josh to recent master commitVincent Ambo2-52/+7
It's been a long time since we updated josh, almost 400 commits in between. I read through the entire changelog, and here are relevant josh commits from in between that might be interesting to us: 38eecee Fix optimisation bug for compose filter (#1159) e1d10b6 Add :rev(...) filter 0f1a07b Initial implementation of refs locking (#929) 88cea2a Initial work on meta repo support 030ad93 Change magic refs to include "for" 28b1d75 Add split changes feature (#904) 1f908d7 Discover filters only on HEAD (#774) a368d8f Make --require-auth only apply to push 8d80230 Add :linear filter (#741) 3460ec2 Implement redundant refs filtering (#700) 55b4e50 Implement stacked changes support (#699) ea1f814 Handle @sha urls by creating magic ref (#690) 883a381 Run filter discovery only on changed refs (#685) 4bb004f Prepend refs/heads to base parameter as default (#664) Of particular interest is a368d8f, which allows us to drop our authentication patch and use the standard --require-auth flag again. The default behaviour of dropping signatures on commits (which are invalid after filtering) has also been changed in josh, now only occuring when the `:unsign` filter is present. Since this breaks commit hashes with our existing exported histories, we are opting to set a `:unsign` filter prefix on all proxy requests to ensure that the hashes stay consistent. During this update we found a bug (josh#1155) which was fixed in the commit that this CL moves josh to. Change-Id: I3afac1619f3aa90313a0441da91f0e4a96fe0a3b Reviewed-on: https://cl.tvl.fyi/c/depot/+/8186 Autosubmit: tazjin <tazjin@tvl.su> Reviewed-by: flokli <flokli@flokli.de> Tested-by: BuildkiteCI
2023-03-02 r/5866 chore(3p/sources): Bump channels & overlayssterni4-180/+23
* //3p/sources: temporarily switch to nixos-unstable-small, since it includes: - evans update we are interested in, allowing us to drop our evans patches. - awscli2 update that unbreaks //users/grfn * //3p/overlays/tvl: - drop evans patches - update tdlib to 1.8.11 to make tazjin's emacs happy - drop obsolete mullvad workaround * //users/grfn/keyboard: disable -Werror for array-bounds warnings. Seems like a non-trivial job to resolve the warning properly, hopefully GCC 12 still generates the same working code as GCC 11 used to. * //users/grfn/system/home: remove yubikey-manager-qt. Yubico can't seem to keep that on pace with yubikey-manager. It requires a <5 version of the latter which is incompatible with the recently released cryptography >= 39. * //3p/gerrit: update changed FOD hash for the fetch step Change-Id: I590ab996247e69b0ab5059cd173840ef4ebfe939 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8133 Tested-by: BuildkiteCI Reviewed-by: flokli <flokli@flokli.de> Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: grfn <grfn@gws.fyi>
2023-02-07 r/5839 chore(3p/sources): bump nixpkgs & overlays (2023-02-07)Vincent Ambo2-37/+18
Included fixes: * //3p/overlays: tdlib override no longer needed (bump has landed upstream) * //corp/{predlozhnik,tvixbolt}: bump wasm-bindgen to match nixpkgs Home-manager has not been bumped as it has introduced an incompatibility with Nix 2.3 Change-Id: I96ac3462b82c73db1ba23be03d7968f10abc9b53 Reviewed-on: https://cl.tvl.fyi/c/depot/+/8033 Tested-by: BuildkiteCI Reviewed-by: flokli <flokli@flokli.de> Reviewed-by: sterni <sternenseemann@systemli.org>
2023-02-01 r/5800 chore(third_party/nixpkgs): drop permittedInsecurePackagesFlorian Klink1-5/+0
subsurface has been fixed a while ago to not pull in qtwebkit anymore, this can be dropped. Change-Id: I173dda71770d02ce8064d1751aff889475d12dfb Reviewed-on: https://cl.tvl.fyi/c/depot/+/7999 Tested-by: BuildkiteCI Autosubmit: flokli <flokli@flokli.de> Reviewed-by: grfn <grfn@gws.fyi>
2023-01-29 r/5775 feat(3p/public-inbox): always set list-id when ingesting in watchVincent Ambo2-0/+39
There is a code path in public-inbox that will (under certain conditions) set the expected list-id as derived from the recipient mail address (so in our case depot@tvl.su -> `List-ID: depot.tvl.su`). However, when/how this triggers seems to be particular to the code path taken based on certain config settings. I couldn't fully figure it out, and to be honest I don't really know Perl, and I don't think this warrants a super-high-effort investigation. For that reason, this patches the appropriate line in public-inbox-watch to always trigger this code path regardless of what is going on with the email. I tested this locally with a public-inbox config that does *not* have a `listid` setting set, as that just adds an additional filter which would be a no-op in this case. All emails are ingested correctly with List-ID set. There might be a better place to put this in (e.g. right before the actual mail ingestion), if a Perl expert is interested in figuring this out and considers it relevant, feel free to send a CL. Note that this will not update old emails. Probably. Change-Id: I4a8a42653aa2f408a85c9301a1ee3545f0e74eed Reviewed-on: https://cl.tvl.fyi/c/depot/+/7946 Tested-by: BuildkiteCI Autosubmit: tazjin <tazjin@tvl.su> Reviewed-by: flokli <flokli@flokli.de>
2023-01-26 r/5761 chore(3p/sources): Bump channels & overlayssterni1-12/+12
Not updating home-manager, since its dependency nmd now uses the `--store` flag not supported by Nix 2.3. Change-Id: I32e253a47013e0314286b0e2a5f6025f1421880b Reviewed-on: https://cl.tvl.fyi/c/depot/+/7931 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2023-01-20 r/5713 chore(3p/sources): Bump channels & overlayssterni4-20/+24
* //3p/overlays/haskell: clean up stale override * //3p/overlays/tvl: work around mullvad build failure * //3p/gerrit: update dependencies' output hash Change-Id: Iaea849fb199bb3d059e067c237ca939b3558a766 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7867 Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org>
2023-01-12 r/5651 refactor(3p/gerrit): use Python 3 for buildingsterni1-6/+1
Change-Id: I7d5587efa02052e2a38588d1f2c9e94b6a6c6372 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7811 Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su>
2023-01-12 r/5650 chore(3p/sources): Bump channels & overlayssterni3-19/+43
* //3p/gerrit: prevent python2 from crashing evaluating due to upstream now officially considering it insecure after being EOL for 3 years. Overriding the meta set has the benefit that we do not need to whitelist the package globally, forcing us to opt in everywhere the dependency is acceptable. * //3p/overlays: bump tdlib so tazjin's emacs can build Change-Id: I50df82d35d56b0dd44b5f687e2dcb101db79738d Reviewed-on: https://cl.tvl.fyi/c/depot/+/7809 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2023-01-07 r/5622 chore(tools/cheddar): bump to syntect 5.0Vincent Ambo1-4/+0
Upgrade to syntect 5.0 and load the new kind of syntax set serialisation with the new helper function for that purpose. Includes other minor API fixes as well, note that the things that are now calling `expect` previously failed internally at those points and we're reasonably confident they don't fail in production. This has been waiting for a long time ... Change-Id: I8af4fef995ff64bfbe24e1f13917fa50ecb6e4ad Reviewed-on: https://cl.tvl.fyi/c/depot/+/7787 Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2023-01-06 r/5596 chore(3p/sources): Bump channels & overlayssterni2-16/+12
* //3p/overlays/haskell: clean up upstreamed override Change-Id: I5e2cf22f62cb3bac2d8e17d6db801f12ed29ca8c Reviewed-on: https://cl.tvl.fyi/c/depot/+/7773 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2023-01-03 r/5574 chore(3p/sources): Bump channels & overlayssterni3-48/+15
* //3p/overlays/haskell: upstream has the correct version of graphmod now, but the updated meta set is not yet in the channel. Change-Id: I55f23c6145d71346ced77d3c349e712f29752b9d Reviewed-on: https://cl.tvl.fyi/c/depot/+/7730 Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org>
2023-01-01 r/5559 chore(users/Profpatsch/cas-serve): remove dependency on superrecordProfpatsch1-14/+0
The use of superrecord here can be replaced by simple labelled tuples. Change-Id: I23690cd0b88896440521fe81e83347ef4773d4a0 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7713 Reviewed-by: sterni <sternenseemann@systemli.org> Autosubmit: Profpatsch <mail@profpatsch.de> Reviewed-by: Profpatsch <mail@profpatsch.de> Tested-by: BuildkiteCI
2022-12-29 r/5545 chore(3p/sources): Bump channels & overlayssterni1-12/+12
* //users/grfn/modules: change deprecated loaOf to attrsOf, the former is an alias for the latter nowadays. Change-Id: I6fa71b43f8c1d0adeafb8b78b197e80733f5392a Reviewed-on: https://cl.tvl.fyi/c/depot/+/7679 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: grfn <grfn@gws.fyi> Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2022-12-29 r/5544 chore(grfn/xanthous): port to brick-0.73sterni2-7/+4
This is the latest version before 1.0 which has some bigger changes as brick's EventM gains the ability to be MonadState which requires adjusting basically all App code. In 0.72, handleEditorEvent started taking a BrickEvent, so we no longer need to unwrap the VtyEvent in handlePromptEvent. Change-Id: Ic6a1ce6e21ba46177d3ce0b8a124abe7d8951464 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7666 Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI Reviewed-by: grfn <grfn@gws.fyi>
2022-12-29 r/5543 chore(3p/sources): Bump channels & overlayssterni4-27/+162
The main change is that nixpkgs updated to GHC 9.2 and Stackage LTS-20, so we suffer from a bit of churn. * //3p/overlays/haskell: - use updated dhall-nix patch for hnix 0.16 - use superrecord fork with fixes for GHC 9.2 - use graphmod-1.4.5.1 which has support for GHC 9.2 * //users/Profpatsch: relax constraints on base in Haskell pkgs * //users/Profpatsch/cas-serve: inherit superrecord from 3p * //users/grfn/xanthous: - //3p/overlays/haskell for 8.10.7: * Provide missing dependency of binary-orphans. Fix already commited upstream as e238c3fdaab710a2ce0135e5a77cd7e6bb023a22, can be dropped when channel advances. * Downgrade to brick 0.71.1, the latest version xanthous supports. - Adjust to generic-arbitrary >= 1.0, providing Arg constraints where necessary. - Increase constraint-solver-iterations to 6 (default 4), so Xanthous.Command and Xanthous.Data can be typechecked. - Drop NFData instances for Key and Modifier which have been added to vty upstream. Change-Id: I2170438c2ce8130b65f1a9fe07c4fecab5683d66 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7654 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Reviewed-by: grfn <grfn@gws.fyi> Reviewed-by: Profpatsch <mail@profpatsch.de> Tested-by: BuildkiteCI
2022-12-26 r/5498 feat(3p/overlays): Build overlaid packages in CI explicitlyVincent Ambo1-1/+1
Change-Id: I2f9e4f6f5f0193456f773e62ce5b8163b253de0c Reviewed-on: https://cl.tvl.fyi/c/depot/+/5489 Autosubmit: tazjin <tazjin@tvl.su> Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2022-12-26 r/5493 fix(third_party/nixpkgs): add support for --bytes-as-base64 in evansFlorian Klink2-0/+160
This is very helpful when calling an RPC method that accepts bytes. Upstreamed to https://github.com/ktr0731/evans/pull/611. Change-Id: Ibdaa1e3ff2aed9c86816e81de6f7652042c9fb11 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7436 Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2022-12-26 r/5489 feat(3p/nixpkgs): pass localSystem alongzimbatm1-1/+1
This ties the top-level localSystem so it's passed to the instance of nixpkgs as well. Change-Id: I9ea3431d5cb35bb99765c5b4d2f22190376435af Reviewed-on: https://cl.tvl.fyi/c/depot/+/5856 Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2022-12-24 r/5481 chore(3p/sources): Bump channels & overlayssterni3-23/+23
* //third_party/overlays/tvl: remove SBCL override, as SBCL 2.2.11 fixes the bug we were running into. * //fun/gemma: use historical nixpkgs for everything due to ABI incompatibilities triggered by preloaded libredirect.so wanting GLIBC_2.34 which is not available in elm-make. Change-Id: I465f0366413856e45ddd1e67fc9d732075e2f3c5 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7595 Tested-by: BuildkiteCI Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: grfn <grfn@gws.fyi>
2022-12-19 r/5427 feat(3p/lisp/lisp-binary): 2022-04-10 -> 2022-09-19sterni1-10/+6
Add missing dependency alexandria. This update adds a feature to disable the cffi which would be neat for ECL. Change-Id: Iad5a4646317fb26bb2dec7bcf3d883075ab24842 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7564 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2022-12-19 r/5426 chore(3p/sources): Bump channels & overlayssterni2-15/+19
* //users/grfn/modules/games: StoneSense requires DFHack to be enabled * //users/grfn/system/iso: gtk needs cairo with xlibs * //users: deal with emacs-overlay attribute renames * //3p/overlays: downgrade sbcl to workaround lisp-binary compilation failure Change-Id: I1573280a923e5021ef399734cb5519b37e72c670 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7563 Reviewed-by: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: grfn <grfn@gws.fyi> Tested-by: BuildkiteCI
2022-12-16 r/5424 chore(3p/overlays): bump crate2nix version to 0.11.0-rc1Vincent Ambo1-0/+18
This version supports newer Cargo features that are starting to appear in our dependencies. Change-Id: I2eb7efdf945cacc53e8ced6ac9cb0255d08ca582 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7589 Reviewed-by: flokli <flokli@flokli.de> Autosubmit: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2022-12-02 r/5371 chore(3p/sources): Bump channels & overlayssterni1-18/+18
Change-Id: Ibac1909575bc43220b6cc23d1cc5c9c8120f75aa Reviewed-on: https://cl.tvl.fyi/c/depot/+/7494 Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2022-11-26 r/5332 feat(3p): add napalmsterni2-0/+19
For another project I need a way to fetch JS dependencies, as I couldn't avoid them there. napalm seems to be the best option for this at the moment, as the approach of running a local registry system seems to be more robust than using npm's offline mode (which npmlock2nix) is doing. If the latter gets better, it may be prudent to switch. napalm is relatively unproblematic, i.e. no Haskell in IFD. Change-Id: Icf57d3505a55422681bd90c445bde52fcf5841aa Reviewed-on: https://cl.tvl.fyi/c/depot/+/7289 Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI
2022-11-26 r/5328 chore(third_party): bump channels & overlaysVincent Ambo1-9/+9
This includes a bump for mullvad to 2022-5, which is crucial for me. Note that the Emacs packages bump has been manually excluded. Fixes: * //users/grfn/system: removed `ec2.hvm` option from roswell, this option is no longer necessary and fails eval with an error now Change-Id: I23f4998591397a820b5912f24ed9526d9bb1532d Reviewed-on: https://cl.tvl.fyi/c/depot/+/7400 Autosubmit: tazjin <tazjin@tvl.su> Reviewed-by: grfn <grfn@gws.fyi> Reviewed-by: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2022-11-23 r/5307 chore(3p/sources): Bump channels & overlayssterni3-16/+21
* //3p/nixpkgs: allow insecure qtwebkit, since a package in grfn's home depends on it. Reasoning for marking qtwebkit as insecure is given here: https://blogs.gnome.org/mcatanzaro/2022/11/04/stop-using-qtwebkit/ * //3p/gerrit: update nondeterministic bazel output hash Change-Id: Ie652905969bf43abb457f6af211f771cff093dce Reviewed-on: https://cl.tvl.fyi/c/depot/+/7353 Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su>
2022-11-23 r/5306 chore(3p/sources): Bump channels & overlayssterni1-15/+15
* //users/tazjin/emacs: string-edit was renamed to string-edit-at-point https://github.com/melpa/melpa/commit/1b2c64ce1b4ce5d94dfefff25fc15537bd427ea4 * //users/grfn/…/modules: - readyset.nix: use rain from nixpkgs - obs.nix: use input-overlay from nixpkgs (newer version, untested) Change-Id: I5887078cee22673c129d186a8448855b92d7b250 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7306 Reviewed-by: tazjin <tazjin@tvl.su> Reviewed-by: grfn <grfn@gws.fyi> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2022-11-14 r/5282 chore(3p/sources): Bump channels & overlayssterni2-22/+15
* //3p/overlays: drop upstreamed fix for buf Change-Id: Ia19a286c603174005be609e9d5e2835b90936075 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7287 Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org> Tested-by: BuildkiteCI
2022-11-12 r/5281 fix(3p): use nixpkgs nix_2_3 expr and tarball job for our Nix forksterni1-6/+17
By re-using the nix_2_3 expression from nixpkgs we are no longer stuck with the 2021 expression from Nix's release.nix and the resulting derivation has a shape that other expressions in nixpkgs expect (e.g. nix-serve), so we can actually overlay our fork into the nix_2_3 attribute. This should reduce duplication on e.g. whitby. Since there is no nixUnstable expression in nixpkgs anymore, it expects a Nix release tarball which we produle using the appropriate release.nix job from the repository. Sadly there is some trickery involved in getting it to respect localSystem, since the tarball job is not based on the passed in systems list. Change-Id: Ib49f298334d166327f91559a06b0a37b2488bc63 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7262 Autosubmit: sterni <sternenseemann@systemli.org> Reviewed-by: tazjin <tazjin@tvl.su> Tested-by: BuildkiteCI Reviewed-by: grfn <grfn@gws.fyi>
2022-11-12 r/5279 fix: use localSystem over builtins.currentSystem where appropriatesterni2-5/+5
cl/5832 added a global system parameter to depot which allowed specifying what `system` should be used for nixpkgs and all depot derivations (assuming a native compilation case) which was implemented in cl/5846. This allows instantiating derivations for a different system than whatever builtins.currentSystem happens to be. This is useful for debugging, allows you to schedule builds on build servers for other platforms or build for architectures that are a subset of the one you are running (e.g. i686-linux). This change eliminates all remaining uses of builtins.currentSystem which could lead to an inconsistent combination of `system` values when passing `localSystem`. Change-Id: I0f824f4f0afa88ef1ddd9a8cecb24bf94bacde7a Reviewed-on: https://cl.tvl.fyi/c/depot/+/7260 Tested-by: BuildkiteCI Reviewed-by: tazjin <tazjin@tvl.su> Autosubmit: sterni <sternenseemann@systemli.org>
2022-11-07 r/5259 chore(3p/sources): Bump channels & overlayssterni1-15/+15
Change-Id: Ib2f76310d24912a44efcabb0dd9eaf9a5d6cc6a9 Reviewed-on: https://cl.tvl.fyi/c/depot/+/7225 Reviewed-by: grfn <grfn@gws.fyi> Tested-by: BuildkiteCI