| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This function has apparently been unused ever since we imported mime4cl
into depot.
Change-Id: I224c9b2947ffd641e01e8cd5454d7a7fa75278d4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8587
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
DECODE-BASE64-STREAM-TO-SEQUENCE is the only thing that requires
anything fancy: We read into an adjustable array. Alternative could be
using REDIRECT-STREAM and WITH-OUTPUT-TO-STRING, but that is likely
slower (untested).
Test cases are kept for now to confirm that qbase64 is conforming to our
expectations, but can probably dropped in favor of a few more sample
messages in the test suite.
:START and :END are sadly no longer supported and need to be replaced by
SUBSEQ.
Change-Id: I5928aed7551b0dea32ee09518ea6f604b40c2863
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8586
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Seems simple enough to use standard LET and a few parentheses more which
stock emacs can indent probably.
Change-Id: I0137a532186194f62f3a36f9bf05630af1afcdae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8584
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Eventually, we'll want to replace dump-stream-binary with something more
efficient—given that we have flexi-streams we can use something that
only does matching element types no problem. REDIRECT-STREAM is much
more efficient thanks to using an internal buffer.
streams.lisp gets a new section at the beginning for grouping utilities
that don't have any real (internal) dependencies.
Change-Id: I141cd36440d532131f389be2768fdaa54e7c7218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8583
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Porting over the rest of the decoding (RFC2047) and especially encoding
over to qbase64 is still pending, as it is a little trickier.
Change-Id: Id4740eb074a387aeea2cb94b781e204248530799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8582
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The input adapter streams were input streams yielding either binary or
character data that could be constructed from a variable data source.
The stream would take care not to destroy the underlying data
source (i.e. not close it if it was a stream), so similar to with
FILE-PORTIONs, but simpler.
Unfortunately, the implementation was quite inefficient: They are
ultimately defined in terms of a function that retrieves the next
character in the source. This only allows for an implementation of
READ-CHAR (and READ-BYTE). Thanks to cl/8559, READ-SEQUENCE can be used
on e.g. FILE-PORTION, but this was still negated by a input adapter
based on one—then, READ-SEQUENCE would need to fall back on READ-CHAR or
READ-BYTE again.
Luckily, we can replace BINARY-INPUT-ADAPTER-STREAM and
CHARACTER-INPUT-ADAPTER-STREAM with a much simpler abstraction: Instead
of extra stream classes, we have a function, MAKE-INPUT-ADAPTER, which
returns an appropriate instance of FLEXI-STREAM based on a given source.
This way, the need for a distinction between binary and character input
adapter is eliminated, since FLEXI-STREAMS supports both binary and
character reads (external format is not yet handled, though).
Consequently, the :binary keyword argument to MIME-BODY-STREAM can be
dropped.
flexi-streams provides stream classes for everything except a stream
that doesn't close the underlying one. Since we have already implemented
this in POSITIONED-FLEXI-INPUT-STREAM, we can split this functionality
into a new superclass ADAPTER-FLEXI-INPUT-STREAM.
This change also allows addressing the performance regression
encountered in cl/8559: It seems that flexi-streams performs worse when
we are reading byte by byte or char by char. (After this change mblog is
still two times slower than on r/6150.) By eliminating the adapter
streams, we can start utilizing READ-SEQUENCE via decoding code that
supports it (i.e. qbase64) and bring performance on par with r/6150
again. Surely there are also ways to gain back even more performance
which has to be determined using profiling. Buffering more aggressively
seems like a sure bet, though.
Switching to flexi-streams still seems like a no-brainer, as it allows
us to drop a lot of code that was quite hacky (e.g. DELIMITED-INPUT-
STREAM) and implements en/decoding handling we did not support before,
but would need for improved correctness.
Change-Id: Ie2d1f4e42b47512a5660a1ccc0deeec2bff9788d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8581
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
This refactor is driven by the following (ultimate) aims:
- Get rid of as much of the custom stream code in mime4cl which makes
less code to maintain in the future.
- Lay the groundwork for correct handling of 8bit transfer encoding:
The mime4cl we inherited assumes that any MIME message can be decoded
completely by the CL implementation (in SBCL's case using latin1)
into CHARACTERs. This is not necessarily the case. flexi-streams
allows changing how the stream is decoded on the fly and also has
support for reading the underlying bytes which is perfect for the
requirements decoding MIME has.
- Since flexi-streams uses trivial-gray-streams, it supports
READ-SEQUENCE. Taking advantage of this may improve decoding
performance significantly in the future.
This incurs the following changes:
- Naturally we now open given files as binary files in MIME-MESSAGE.
Given strings are encoded using STRING-TO-OCTETS and then passed on
to a new octet vector method. Instead of MY-STRING-INPUT-STREAM this
now uses flexi-streams' WITH-INPUT-FROM-SEQUENCE.
- OPEN-FILE-PORTION and OPEN-DECODED-FILE-PORTION need to be merged,
since the transfer encoding not only implies an extra decoder stream
that needs to be attached after file portion stream, but also imply a
certain encoding of the stream itself (mostly binary vs. ASCII).
As flexi-streams can change their encoding on the fly this could be
untangled again, but it is not strictly necessary.
As before, we use the DATA slot of the file portion to create a fresh
stream if possible. Instead of strings we now use an vector of octets
to match MIME-MESSAGE.
The actual portioned stream relies on POSITIONED-FLEXI-INPUT-STREAM, a
subclass of the stock FLEXI-INPUT-STREAM class, described below.
- POSITIONED-FLEXI-INPUT-STREAM replaces DELIMITED-INPUT-STREAM. It is
created using MAKE-POSITIONED-FLEXI-INPUT-STREAM which accepts the
same arguments as MAKE-FLEXI-STREAMS and, additionally, :IGNORE-CLOSE.
A POSITIONED-FLEXI-INPUT-STREAM works the same as an
FLEXI-INPUT-STREAM, but upon creation, the underlying stream is
rewinded or forwarded to the argument given by :POSITION using
FILE-POSITION.
If :IGNORE-CLOSE is T, a call to CLOSE is not forwarded to the
underlying stream.
Change-Id: I2d48c769bb110ca0b7cf52441bd63c1e1c2ccd04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8559
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Since rt.lisp seems to start tests in parallel, the informational output
about which sample file is being tested gets mangled in all sorts of
ways. The solution is to just loop over the sample files outside a test
and schedule a single test case per sample file from there.
Change-Id: I4494e4a526ce6d92a298cf7daf06c8013c7ca605
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8569
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I448b9241726c3bb08f14188775a66e1da1225e02
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5004
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ia674705b27fbc4ae3055973eec563b078a4a873c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8558
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
CL's path handling strikes once again…
Change-Id: I4345941c8e2856f80cfddecc5356464f92b1a150
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8557
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: If47a8ffde5b4910f6c52fe82a2372431a0e46045
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8556
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This makes sure that initializing coder-stream-mixin (for the most part)
has the same interface as initializing qbase64:decode-stream. This will
make integrating that as a faster replacement to
mime4cl:base64-decoder-stream a bit easier.
The idea is to replace the char by char base64 decoder with one that
supports read-sequence. After that deliminited-input-stream needs to
gain support for read-sequence as well, so we can actually take
advantage of this fact. Finally, we'll have to evaluate the remaining
decoders and think about switching the (base64) encoders over as well.
Change-Id: If971da02437506e00a7c9fab2b94efc42725e62d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8555
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
For whatever reason, there were two sort of identical tests, mime.1 and
mime.2, in the mime4cl test suite: The former tested *sample1-file* and
the latter all messages *samples-directory*—in the same way, parsing the
original and a re-rendered version of the message to check if they were
equal.
We can just move sample1.msg into *samples-directory*, get rid
of *sample1-file* and thus pave the way for more test messages in the
future.
Change-Id: I843be331682b731af6ae02a4648ba1c64aaf59a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8546
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
The generic function itself needs to be defined using defgeneric,
defmethod is used for a defining method of a generic function, i.e. how
it should behave when confronted with a certain class.
Change-Id: Idd38afa02b56c5002e215decfff7f0c25267eab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8532
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
decode-RFC2047 used babel's octets-to-string, but we can replace it with
the function of the same name from flexi-streams. This doesn't make a
difference for the moment, but will be useful in the future:
flexi-streams provides de- and encoding streams that we'll be able to
use to replace and augment some of the stream based MIME part handling
code in mime4cl. babel doesn't have as powerful stream functionality
although it seems to be planned.
Another big upside of flexi-streams is that we'll be able to replace
delimited-input-string using it. This should allow us to slowly work
towards correct and more efficient decoding of MIME bodies.
Change-Id: I17174f1c96c5be7d103d396564e6aa0fe24c80fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8371
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Add missing dependency alexandria. This update adds a feature to disable
the cffi which would be neat for ECL.
Change-Id: Iad5a4646317fb26bb2dec7bcf3d883075ab24842
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7564
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: Iacc521dfdd4b4a2d5cef3920cf8189bcce35a488
|
|
The problem went away once again, let's see how long it'll last this time.
As it turns out, CCL has a Unicode Standard conforming string
implementation that doesn't allow the use of (lone) surrogate code
points, requiring us to disable a test in cl-json which tested the
behavior of en- and decoding of such a (technically illegal) string.
Change-Id: I8bfa482934bbf94f86cecdde02d5c3d4e77950a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6204
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Pin cl-json to a branch on my fork of cl-json which implements encoding
and decoding of non-BMP Unicode codepoints (>= U+10000) using UTF-16
surrogate points as the JSON specs prescribes. While we're at it, also
enable the test suite of the package.
This resolves the annoying issue of panettone garbling up some Unicode
characters by sending invalid JSON to cheddar and then incorrectly
decoding the returned result.
Fixes: b/145.
Change-Id: I44cb38c2775c0e5512d75f51dff0d1deb39f8f78
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5884
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
SCLF is quite a big utility library (almost 3€ LOC) with limited
portability (CMUCL, SBCL and CLISP to an extent). Continuing to maintain
it is an unnecessary burden, as depot only uses a fraction of it which
is now inlined into the respective users (mime4cl and mblog).
In the future trimming down ex-sclf.lisp may make sense either by
refactoring the code that uses it or by moving interesting utilities
into e.g. klatre.
Change-Id: I2e73825b6bfa372e97847f25c30731a5aad4a1b5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5922
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This switches upstream from hankhero/cl-json to
sharplispers/cl-json (the former of which had its last commit in 2014).
Sadly the new upstream hasn't decided on an appropriate fix for b/145
yet (due to concern about backwards compatibility, apparently). I did
not look before working on a fix, so I have an 90% finished fix which
is (I think) better than the already proposed ones, so I'll patch it in
here eventually.
Change-Id: I9e39e138fa655794b864db5f268bdfdc35788fcc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5795
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Accessing the headers of a MIME message feels like something mime4cl
should handle. We implemented this ad hoc in mblog before in order to
not need to worry about doing it in a sensible way. Now we introduce a
decent-ish interface for getting a header from a MIME message,
mime-message-header-values:
* It returns a list because MIME message headers may appear multiple
times.
* It decodes RFC2047 only upon request, as you may want to be stricter
about parsing certain fields.
* It checks header name equality case insensitively.
The code for decoding the RFC2047 string is retained and still uses
babel for doing the actual decoding.
Change-Id: I58bbbe4b46dbded04160b481a28a40d14775673d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5150
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
By computing the amount the stream position advanced we can save a
syscall on every read which speeds up mime:mime-body-stream by /a lot/,
e.g. extracting a ~3MB attachment drops from over 15s to under ~0.5s.
There's still a lot to be gained and correctness left to be desired
which can be addressed as described in the newly added comment.
Change-Id: I5e1dfd213aac41203f271cf220db456dfb95a02b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5073
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This CL can be used to compare the style of nixpkgs-fmt against other
formatters (nixpkgs, alejandra).
Change-Id: I87c6abff6bcb546b02ead15ad0405f81e01b6d9e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4397
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: cynthia <cynthia@tvl.fyi>
Reviewed-by: edef <edef@edef.eu>
Reviewed-by: eta <tvl@eta.st>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Seems like some issues to do with bytecode compilation have been fixed
at HEAD. closer-mop compiles again and an ironclad failure with the
next quicklisp/channel bump is avoided.
In this change pathname handling in ECL also changed somehow, causing it
to make the :directory part absolute by prefixing it with a slash which
made ld.bfd unhappy while linking an output path that began with a
double slash. This problem can be avoided by constructing the path as
ANSI Common Lisp intended. The truename on the out path is important to
make it recognize that it is indeed a directory.
Change-Id: I5e744022b92502f99ac0b33411a6be443707e200
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5076
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Having #+cmu all over the place suggests that we maintain CMUCL support
or test with CMUCL which is not the case.
Change-Id: Ia0828cb1ac48e49acdee6fef7a0fa2c04c1805b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5068
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This should be a net positive for portability and lets us drop some of
the CMUCL cruft (which we don't test anyway, CMU support may have
regressed regardless).
Change-Id: I85664d82d211177da1db9eebea65c956295b09f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5067
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Done using
find third_party/lisp/{sclf,mime4cl,npg} \
-name '*.lisp' -or -name '*.asd' \
-exec bash -c 'expand -i -t 8 "$0" | sponge "$0"' {} \;
Change-Id: If84afac9c1d5cbc74e137a5aa0ae61472f0f1e90
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5066
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I6a04c5bb611f011e66c1a8d7089e0b2bff3d2fdf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5002
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: I6efcb07b7763c4d108baff717d07097cb324ba4f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5003
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
|
|
Moves to the derivation-based git fetchers everywhere in third-party.
This might help with forward-compatibility with newer Nix versions,
though that's not our primary concern right now.
Change-Id: I565bb72585b8639893e9ea3a9e233338aede63a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3903
Tested-by: BuildkiteCI
Reviewed-by: zseri <zseri.devel@ytrizja.de>
|
|
Change-Id: Id259341e251170c1caeeab5c9fcb6fbd973372f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4816
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
* 3p/lisp/closer-mop: closer-mop no longer builds with ECL (see linked
issue), so let's mark it as broken for now.
Change-Id: I97c29d718682cec4ecc682ff1593d0ce9aca0010
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4607
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
|
|
this one was a little more difficult because it needs a patch, there's
something wonky with the definition order
fwiw, the upstream cvs repository ... server errors.
Change-Id: I2d99359edec36b578389f1be1fcf077743c29c4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4342
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: If4ee3f9a0afea74759493de14c7f672714739f45
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4341
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Id0613ace9b77d3ad46cdf2366e84d026d1158ace
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4340
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Ic903e31b03e4e4075887d37f293c89b30e6c5df4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4339
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Idee3cb18ac42bd820d87aac0c68206436c1f4691
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4338
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
nixpkgs includes a lispPackages set which is generated from something.
In the meantime, we pretty much never update our Lisp deps.
This commit ties our sources to nixpkgs.lispPackages where the desired
package is included in nixpkgs (which is actually most of them!)
Change-Id: I520a006535980271b2fa4e0ed4e34029475dcbef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4331
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
* move packages and adapt them for the depot structure instead of
briefcase
* drop linear-programming package, it didn't build anyways
Note that at least some of these packages (e.g. prove) are deprecated
upstream, but lets sort that out later.
Change-Id: I7f5a5faa29d57f060b21ac8e1706090866a82000
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4330
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
|
|
Adds a simple generic function find-mime-text-part which returns the
first suitable text/* part in any MIME part it is given.
Has no meaningful alternatives handling at the moment: It will pick the
first text part and doesn't allow specifying a preference.
Change-Id: Id9b113b3ef3ca1a575ce8f3582a4f85e30edfb43
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This seems to be unnecessary: It doesn't muffle any SBCL warnings that
affect a current version and does nothing special otherwise.
Change-Id: I36efde761fc95d9df735f29d2eb369c6b61853c9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3486
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Luckily we don't need to deal with this mess since all our
implementations work similarly wrt streams and “wide” characters.
Change-Id: I3ccc606a59c42791f2591d752673c867d848a332
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3485
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
The following changes are required to make mime4cl build:
* file-position doesn't like to be called with NIL as the position
argument, so we have to make sure to not do that in
stream-file-position. My workaround is a bit clunky, but works.
* Tests discover the sample file via relative path resolution. This
doesn't work when they are imported into the nix store as individual
files. Instead we make use of the fact that DEFVAR is a no-op if the
variable is already defined and inject a file via the nix build that
sets the relevant ones. For the path to sample1.msg, we need to create
a new variable.
Change-Id: I74eeda7bf2c2a4f64cc2b90e72081513ec3285d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3270
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Used http://wcp.sdf-eu.org/software/mime4cl-20150207T211851.tbz (sha256
5a914669bba7561efe59a4fd0817204c07ad2add98b03ae206ef185ac04affb3).
Importing seems sensible since there's no upstream repo nor has their
been a release since 2015.
This is just an import commit, so the changes made to make it build are
more discoverable as their own commit.
Change-Id: I2ff28c3c7433abdf7857204bc89eaf9edc0b1cbc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3378
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I9f987dc25d77a829cc0716cbe4cb1b91c36de861
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3269
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Used http://wcp.sdf-eu.org/software/npg-20150517T144652.tbz (sha256
42e88f6067128fbdb3a3d578371c9b0ee2a34f1d36daf80be8a520094132d828).
There's no upstream repository nor a release since 2015, so importing
seems to make a lot of sense.
Since we can't subtree making any depot-related changes in a separate CL
-- this is only the source import.
Change-Id: I64c984ca0a84b9e48c6f496577ffccce1d7bdceb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3377
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Adding the default.nix is quite straightforward, however we have to make
today's SBCL happy: due to package locking it no longer likes sclf using
an sb-impl internal constant for some reason. This is however a good
opportunity to clean up the stat-*-time code: It converted the times in
an implementation specific way even though time.lisp does provide a
generic way to convert between unix and universal time. Note that the
updated ASDF file is untested, but should be a trivial enough change.
Change-Id: If193bf830ac704cc53e0855d8e9fff2b5a5ef291
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3268
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Used http://wcp.sdf-eu.org/software/sclf-20150207T213551.tbz (sha256
a231aeecdb9e87c72642292a1e083fffb33e69ec1d34e667326c6c35b8bcc794).
There's no upstream repository nor a release since 2015, so importing
seems to make a lot of sense.
Since we can't subtree making any depot-related changes in a separate CL
to make them more discoverable -- this is only the source import.
Change-Id: Ia51a7f4029dba3abd1eee4eeebcf99aca5c5ba4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3376
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
