about summary refs log tree commit diff
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2004-04-21 * Do initialise state (the DB etc.) when doing a `make install',Eelco Dolstra1-7/+0
unless `--disable-init-state' is passed to configure.
2004-04-21 * Recurse into attribute sets and lists when getting derivations fromEelco Dolstra1-0/+4
an expression.
2004-04-14 * Be stricter in verifying store paths.Eelco Dolstra3-4/+9
2004-04-05 * When something goes wrong in the evaluation of a Nix expression,Eelco Dolstra8-89/+200
print a nice backtrace of the stack, rather than vomiting a gigantic (and useless) aterm on the screen. Example: error: while evaluating file `.../pkgs/system/test.nix': while evaluating attribute `subversion' at `.../pkgs/system/all-packages-generic.nix', line 533: while evaluating function at `.../pkgs/applications/version-management/subversion/default.nix', line 1: assertion failed at `.../pkgs/applications/version-management/subversion/default.nix', line 13 Since the Nix expression language is lazy, the trace may be misleading. The purpose is to provide a hint as to the location of the problem.
2004-04-02 * Print a more useful error message in case of an invalid derivationEelco Dolstra1-1/+6
binding.
2004-03-30 * The recent change in nixpkgs of calling `stdenv.mkDerivation'Eelco Dolstra2-2/+11
instead of `derivation' triggered a huge slowdown in the Nix expression evaluator. Total execution time of `nix-env -qa' went up by a factor of 60 or so. This scalability problem was caused by expressions such as (x: y: ... x ...) a b where `a' is a large term (say, the one in `all-packages-generic.nix'). Then the first beta-reduction would produce (y: ... a ...) b by substituting `a' for `x'. The second beta-reduction would then substitute `b' for `y' into the body `... a ...', which is a large term due to `a', and thus causes a large traversal to be performed by substitute() in the second reduction. This is however entirely redundant, since `a' cannot contain free variables (since we never substitute below a weak head normal form). The solution is to wrap substituted terms into a `Closed' constructor, i.e., subst(subs, Var(x)) = Closed(e) iff subs[x] = e have substitution not descent into closed terms, subst(subs, Closed(x)) = Closed(x) and otherwise ignore them for evaluation, eval(Closed(x)) = eval(x). * Fix a typo that caused incorrect substitutions to be performed in simple lambdas, e.g., `(x: x: x) a' would reduce to `(x: a)'.
2004-03-28 * Added an operator `?' to test for attribute existence, e.g.,Eelco Dolstra2-1/+10
`attrs ? x' yields true iff `attrs' has an attribute named `x'.
2004-03-28 * Added an operator `~' to select paths within a derivation. E.g.,Eelco Dolstra3-0/+16
{stdenv, bash}: derivation { builder = bash ~ /bin/sh; args = ["-e" "-x" ./builder.sh]; ... } Here the attribute `builder' will evaluate to, e.g., `/nix/store/1234abcd...-bash-2.0.1/bin/sh'.
2004-03-28 * Added plain lambdas, e.g., `let { id = x: x; const = x: y: x; }'.Eelco Dolstra5-37/+63
`bla:' is now no longer parsed as a URL. * Re-enabled support for the `args' attribute in derivations to specify command line arguments to the builder, e.g., ... builder = /usr/bin/python; args = ["-c" ./builder.py]; ...
2004-03-27 * Disallow the Nix store or any of its parents from being symlinks.Eelco Dolstra2-11/+37
This is because the contents of these symlinks are not incorporated into the hashes of derivations, and could therefore cause a mismatch between the build system and the target system. E.g., if `/nix/store' is a symlink to `/data/nix/store', then a builder could expand this path and store the result. If on the target system `/nix/store' is not a symlink, or is a symlink that points somewhere else, we have a dangling pointer. The trigger for this change is that gcc 3.3.3 does exactly that (it applies realpath() to some files, such as libraries, which causes our impurity checker to bail out.) An annoying side-effect of this change is that it makes it harder to move the Nix store to a different file system. On Linux, bind mounts can be used instead of symlink for this purpose (e.g., `mount -o bind /data/nix/store /nix/store').
2004-03-27 * Do not close a nesting level twice after close() has beenEelco Dolstra2-1/+11
called explicitly on a Nest object.
2004-03-22 * Some more nesting.Eelco Dolstra3-14/+40
2004-03-22 * Nix now has three different formats for the log information itEelco Dolstra3-7/+52
writes to stderr: - `pretty': the old nested style (default) - `escapes': uses escape codes to indicate nesting and message level; can be processed using `log2xml' - `flat': just plain text, no nesting These can be set using `--log-type TYPE' or the NIX_LOG_TYPE environment variable.
2004-03-19 * `null' is a normal form.Eelco Dolstra1-8/+11
2004-03-18 * Escape codes to force line breaks to be ignored.Eelco Dolstra1-1/+9
2004-03-18 * Added an extra escape code to signal "unimportant" messages. If a tree ↵Eelco Dolstra3-9/+46
only has unimportant messages, it is collapsed by the default. * Also added an optional integer argument to the escape code for opening a nesting level to indicate lack of importance. If set, the tree is collapsed by default.
2004-03-18 * Collapsable trees.Eelco Dolstra3-5/+65
2004-03-18 * Use unordered lists, which is more sensible semantically forEelco Dolstra2-50/+43
representing tree structures.
2004-03-18 * Don't use tables. Konqueror likes this much better.Eelco Dolstra2-71/+33
2004-03-17 * Display the popup directly over the abbreviation.Eelco Dolstra1-2/+2
2004-03-17 * A simpler way of implementing the store reference popups, thanks toEelco Dolstra2-17/+14
Martin and CSS guru Martijn Vermaat.
2004-03-16 * Store paths are now abbreviated in the generated HTML file.Eelco Dolstra3-13/+89
Hovering over the abbreviated path will reveal the full path. This probably only works in Mozilla.
2004-03-15 * Added a utility that can be used to produce nice HTML pages from NixEelco Dolstra5-1/+239
build logs. The program `log2xml' converts a Nix build log (read from standard input) into XML file that can then be converted to XHTML by the `log2html.xsl' stylesheet. The CSS stylesheet `logfile.css' is necessary to make it look good. This is primarily useful if the log file has a *tree structure*, i.e., that sub-tasks such as the various phases of a build (unpack, configure, make, etc.) or recursive invocations of Make are represented as such. While a log file is in principle an unstructured plain text file, builders can communicate this tree structure to `log2xml' by using escape sequences: - "\e[p" starts a new nesting level; the first line following the escape code is the header; - "\e[q" ends the current nesting level. The generic builder in nixpkgs (not yet committed) uses this. It shouldn't be to hard to patch GNU Make to speak this protocol. Further improvements to the generated HTML pages are to allow collapsing/expanding of subtrees, and to abbreviate store paths (but to show the full path by hovering the mouse over it).
2004-03-12 * Set the NIX_STORE and NIX_BUILD_TOP environment variables inEelco Dolstra3-3/+19
builders to point to the store and the temporary build directory, respectively. Useful for purity checking. * Also set TEMPDIR, TMPDIR, TEMP, and TEMP to NIX_BUILD_TOP to make sure that tools in the builder store temporary files in the right location.
2004-02-19 * Resolve an ambiguity between ifs and attribute selection, e.g., `ifEelco Dolstra1-3/+7
b then x else y.z'.
2004-02-16 * Allow linking against an external Berkeley DB / ATerm library.Eelco Dolstra8-15/+13
2004-02-16 * Allow the location of the store to be specified (--with-store-dir).Eelco Dolstra2-2/+2
* Do not create stuff in localstatedir when doing `make install' (since we may not have write access). In general, installation of constant code/data should be separate from the initialisation of mutable state.
2004-02-16 * Inherited attributes in recursive attribute sets are in scope of theEelco Dolstra2-10/+18
non-inherited attributes.
2004-02-14 * The environment variable NIX_ROOT can now be set to execute Nix in aEelco Dolstra4-12/+70
chroot() environment. * A operation `--validpath' to register path validity. Useful for bootstrapping in a pure Nix environment. * Safety checks: ensure that files involved in store operations are in the store.
2004-02-13 * Regression fix: realise substitutes and detect cycles.Eelco Dolstra1-1/+8
2004-02-11 * When creating a new generation, also make the normal form of theEelco Dolstra3-6/+10
derivation (i.e., the closure store expression) a root of the garbage collector. This ensures that running `nix-collect-garbage --no-successors' is safe.
2004-02-10 * Lots of manual stuff. Reference pages for most Nix commands.Eelco Dolstra1-1/+1
* nix-pull now requires the full url to the manifest, i.e., `/MANIFEST/' is no longer automatically appended. * nix-prefetch-url works again.
2004-02-10 * Print what generation we are switching to; honour --dry-run flag.Eelco Dolstra1-0/+5
2004-02-09 * In `--upgrade': added flags `--lt', `--leq', `--always' to specifyEelco Dolstra4-24/+81
whether we want to upgrade if the current version is less than the available version (default), when it is less or equal, or always. * Added a flag `--dry-run' to show what would happen in `--install', `--uninstall', and `--upgrade', without actually performing the operation.
2004-02-08 * A command `--switch-generation' to switch to a specific generationEelco Dolstra3-0/+71
of the current profile, e.g., $ nix-env --list-generations ... 39 2004-02-02 17:53:53 40 2004-02-02 17:55:18 41 2004-02-02 17:55:41 42 2004-02-02 17:55:50 (current) $ nix-env --switch-generation 39 $ ls -l /nix/var/nix/profiles/default ... default -> default-39-link * Also a command `--rollback' which is just a convenience operation to rollback to the oldest generation younger than the current one. Note that generations properly form a tree. E.g., if after switching to generation 39, we perform an installation action, a generation 43 is created which is a descendant of 39, not 42. So a rollback from 43 ought to go back to 39. This is not currently implemented; generations form a linear sequence.
2004-02-06 * In `--list-generations', show what the current generation is.Eelco Dolstra3-13/+30
2004-02-06 * A command `--list-generations' to show all generations for aEelco Dolstra3-9/+80
profile.
2004-02-06 * More refactoring.Eelco Dolstra4-57/+74
2004-02-06 * Refactoring.Eelco Dolstra4-131/+152
2004-02-06 * Use the profile pointed to by ~/.nix-profile if no --profileEelco Dolstra2-7/+12
argument is specified.
2004-02-06 * Improvements to profiles. Generations are now per-profile, e.g.,Eelco Dolstra4-47/+51
default -> default-94-link default-82-link -> /nix/store/cc4480... default-83-link -> /nix/store/caeec8... ... default-94-link -> /nix/store/2896ca... experimental -> experimental-2-link experimental-1-link -> /nix/store/cc4480... experimental-2-link -> /nix/store/a3148f... * `--profile' / `-p' -> `--switch-profile' / `-S' * `--link' / `-l' -> `--profile' / `-p' * The default profile is stored in $prefix/var/nix/profiles. $prefix/var/nix/links is gone. Profiles can be stored anywhere. * The current profile is now referenced from ~/.nix-profile, not ~/.nix-userenv. * The roots to the garbage collector now have extension `.gcroot', not `.id'.
2004-02-04 * Extended the `inherit' syntax to optionally select attributes fromEelco Dolstra2-8/+18
other attribute sets, rather than the current scope. E.g., {inherit (pkgs) gcc binutils;} is equivalent to {gcc = pkgs.gcc; binutils = pkgs.binutils;} I am not so happy about the syntax.
2004-02-04 * An attribute set update operator (//). E.g.,Eelco Dolstra3-0/+19
{x=1; y=2; z=3;} // {y=4;} => {x=1; y=4; z=3;}
2004-02-04 * Use a map to lookup primops.Eelco Dolstra12-75/+127
* Various performance improvements in the evaluator. * Do not link against unused (and missing!) libraries (-lsglr, etc.).
2004-02-03 * Verify that all variables in a Nix expression are defined.Eelco Dolstra4-21/+92
2004-02-02 * Added syntactic sugar to the construction of attribute sets toEelco Dolstra6-41/+78
`inherit' variables from the surrounding lexical scope. E.g., {stdenv, libfoo}: derivation { builder = ./bla; inherit stdenv libfoo; xyzzy = 1; } is equivalent to {stdenv, libfoo}: derivation { builder = ./bla; stdenv = stdenv; libfoo = libfoo; xyzzy = 1; } Note that for mutually recursive attribute set definitions (`rec {...}'), this also works, that is, `rec {inherit x;}' is equivalent to `let {fresh = x; body = rec {x = fresh;};}', *not* `rec {x = x}'.
2004-02-02 * Sort `nix-env -q' output by derivation name.Eelco Dolstra4-11/+28
* `--version' flag for all commands. * Manual updates.
2004-01-30 * Doh!Eelco Dolstra1-1/+3
2004-01-30 * Parser numbers again.Eelco Dolstra3-2/+6
* Include missing files in distributions.
2004-01-30 * Detect flex and bison; updated the manual.Eelco Dolstra1-2/+4