about summary refs log tree commit diff
path: root/src/libutil/util.cc
AgeCommit message (Collapse)AuthorFilesLines
2012-03-05 Set the close-on-exec flag on file descriptorsEelco Dolstra1-0/+12
2012-02-15 On Linux, make the Nix store really read-only by using the immutable bitEelco Dolstra1-0/+3
I was bitten one time too many by Python modifying the Nix store by creating *.pyc files when run as root. On Linux, we can prevent this by setting the immutable bit on files and directories (as in ‘chattr +i’). This isn't supported by all filesystems, so it's not an error if setting the bit fails. The immutable bit is cleared by the garbage collector before deleting a path. The only tricky aspect is in optimiseStore(), since it's forbidden to create hard links to an immutable file. Thus optimiseStore() temporarily clears the immutable bit before creating the link.
2012-02-09 Use data() instead of c_str() where appropriateEelco Dolstra1-3/+3
2011-12-22 * In the garbage collector, delete invalid paths before deletingEelco Dolstra1-1/+9
unreachable paths. This matters when using --max-freed etc.: unreachable paths could become reachable again, so it's nicer to keep them if there is "real" garbage to be deleted. Also, don't use readDirectory() but read the Nix store and delete invalid paths in parallel. This reduces GC latency on very large Nix stores.
2010-12-13 * nix-instantiate: return exit status 100 to denote a permanent buildEelco Dolstra1-1/+2
failure. The build hook can use this to distinguish between transient and permanent failures on the remote side.
2010-12-13 * createDirs(path): if path already exists, make sure it's aEelco Dolstra1-20/+22
directory. * Provide a C++ wrapper around lstat().
2010-10-04 * Sync with the trunk.Eelco Dolstra1-1/+10
2010-10-04 * In printMsg(), ignore failing writes to stderr if we're in anEelco Dolstra1-1/+10
exception handler, otherwise throw an exception. We need to ignore write errors in exception handlers to ensure that cleanup code runs to completion if the other side of stderr has been closed unexpectedly.
2010-08-27 * Experimental feature: allow a derivation to tell the build hook thatEelco Dolstra1-0/+11
it requires a certain feature on the build machine, e.g. requiredSystemFeatures = [ "kvm" ]; We need this in Hydra to make sure that builds that require KVM support are forwarded to machines that have KVM support. Probably this should also be enforced for local builds.
2010-08-04 * Sync with the trunk.Eelco Dolstra1-0/+1
2010-06-24 src/libutil/util.cc: include <limit.h> to ensure that PATH_MAX is definedPeter Simons1-0/+1
2010-05-12 * Sync with the trunk.Eelco Dolstra1-47/+41
2010-04-20 * Sync with the trunk.Eelco Dolstra1-4/+6
2010-04-19 * Don't use the ATerm library for parsing/printing .drv files.Eelco Dolstra1-0/+41
2010-04-12 * Remove some obsolete functions.Eelco Dolstra1-47/+0
2010-03-19 * Clean up error messages in killUser().Eelco Dolstra1-4/+6
2010-02-24 * Don't use fdatasync since it doesn't work on Snow Leopard.Eelco Dolstra1-1/+1
* Don't refer to config.h in util.hh, because config.h is not installed (http://hydra.nixos.org/build/303053).
2010-02-24 * Remove the fdatasync check since it's no longer needed.Eelco Dolstra1-2/+1
2010-02-10 Don't rely on `PATH_MAX' on GNU.Ludovic Courtès1-0/+10
2010-02-02 * Remove most Cygwin-specific code. Cygwin 1.7 implements advisoryEelco Dolstra1-12/+0
POSIX locks, and simulates Unix-style file deletion semantics sufficiently. Note that this means that Nix won't work on Cygwin 1.5 anymore.
2010-01-29 * Added an option "fsync-metadata" to fsync() changes toEelco Dolstra1-11/+3
/nix/var/nix/db. * Removed the function writeStringToFile since it does (almost) the same thing as writeFile.
2009-11-24 * Templatise getIntArg / string2Int.Eelco Dolstra1-16/+0
2009-11-24 * In the garbage collector, don't count files with a link count > 1 inEelco Dolstra1-2/+4
the "bytes/blocks freed" statistics.
2009-06-30 * Don't show trace information by default (`--show-trace' to enable).Eelco Dolstra1-1/+1
NixOS evaluation errors in particular look intimidating and generally aren't very useful. Ideally the builtins.throw messages should be self-contained.
2009-03-28 * Simplify communication with the hook a bit (don't use fileEelco Dolstra1-0/+27
descriptors 3/4, just use stdin/stderr).
2008-12-04 * Don't ignore errors from writing to stderr. That way, whenEelco Dolstra1-5/+1
nix-store -r (or some other operation) is started via ssh, it will at least have a chance of terminating quickly when the connection is killed. Right now it just runs to completion, because it never notices that stderr is no longer connected to anything. Of course it would be better if sshd would just send a SIGHUP, but it doesn't (https://bugzilla.mindrot.org/show_bug.cgi?id=396).
2008-08-25 * Strip off the `.nix' suffix from the attribute name for files inEelco Dolstra1-0/+6
~/.nix-defexpr, otherwise the attribute cannot be selected with the `-A' option. Useful if you want to stick a Nix expression directly in ~/.nix-defexpr.
2008-08-02 * Make nix-env --dry-run print the paths to be substituted correctlyEelco Dolstra1-2/+20
again. (After the previous substituter mechanism refactoring I didn't update the code that obtains the references of substitutable paths.) This required some refactoring: the substituter programs are now kept running and receive/respond to info requests via stdin/stdout.
2008-06-18 * --max-freed: support values >= 4 GB.Eelco Dolstra1-0/+8
2008-06-18 * Some refactoring: put the GC options / results in separate structs.Eelco Dolstra1-12/+23
* The garbage collector now also prints the number of blocks freed.
2008-06-09 * Merged the no-bdb branch (-r10900:HEADEelco Dolstra1-2/+3
https://svn.nixos.org/repos/nix/nix/branches/no-bdb).
2008-05-21 * GCC 4.3.0 (Fedora 9) compatibility fixes. Reported by Gour andEelco Dolstra1-1/+3
Armijn Hemel.
2008-03-27 * Use /tmp/nix-build-<drvpath>-<counter> instead ofEelco Dolstra1-6/+14
/tmp/nix-<pid>-<counter> for temporary build directories. This increases purity a bit: many packages store the temporary build path in their output, causing (generally unimportant) binary differences.
2007-12-14 * Use strsignal if available to give better error messages forEelco Dolstra1-2/+10
builders that fail due to a signal.
2007-11-29 * nix-env -e: support uninstalling by path, so that one can sayEelco Dolstra1-2/+1
$ nix-env -e $(which firefox) or $ nix-env -e /nix/store/nywzlygrkfcgz7dfmhm5xixlx1l0m60v-pan-0.132 * nix-env -i: if an argument contains a slash anywhere, treat it as a path and follow it through symlinks into the Nix store. This allows things like $ nix-build -A firefox $ nix-env -i ./result * nix-env -q/-i/-e: don't complain when the `*' selector doesn't match anything. In particular, `nix-env -q \*' doesn't fail anymore on an empty profile.
2007-10-27 * Delete the chroot directory automatically.Eelco Dolstra1-4/+4
* Removed some debug messages.
2007-10-27 * Support for doing builds in a chroot under Linux. The builder isEelco Dolstra1-9/+23
executed in a chroot that contains just the Nix store, the temporary build directory, and a configurable set of additional directories (/dev and /proc by default). This allows a bit more purity enforcement: hidden build-time dependencies on directories such as /usr or /nix/var/nix/profiles are no longer possible. As an added benefit, accidental network downloads (cf. NIXPKGS-52) are prevented as well (because files such as /etc/resolv.conf are not available in the chroot). However the usefulness of chroots is diminished by the fact that many builders depend on /bin/sh, so you need /bin in the list of additional directories. (And then on non-NixOS you need /lib as well...)
2007-09-17 * nix-env: allow ~/.nix-defexpr to be a directory. If it is, then theEelco Dolstra1-0/+1
Nix expressions in that directory are combined into an attribute set {file1 = import file1; file2 = import file2; ...}, i.e. each Nix expression is an attribute with the file name as the attribute name. Also recurses into directories. * nix-env: removed the "--import" (-I) option which set the ~/.nix-defexpr symlink. * nix-channel: don't use "nix-env --import", instead symlink ~/.nix-defexpr/channels. So finally nix-channel --update doesn't override any default Nix expressions but combines with them. This means that you can have (say) a local Nixpkgs SVN tree and use it as a default for nix-env: $ ln -s .../path-to-nixpkgs-tree ~/.nix-defexpr/nixpkgs_svn and be subscribed to channels (including Nixpkgs) at the same time. (If there is any ambiguity, the -A flag can be used to disambiguate, e.g. "nix-env -i -A nixpkgs_svn.pan".)
2007-08-12 * Get rid of the substitutes database table (NIX-47). Instead, if weEelco Dolstra1-2/+5
need any info on substitutable paths, we just call the substituters (such as download-using-manifests.pl) directly. This means that it's no longer necessary for nix-pull to register substitutes or for nix-channel to clear them, which makes those operations much faster (NIX-95). Also, we don't have to worry about keeping nix-pull manifests (in /nix/var/nix/manifests) and the database in sync with each other. The downside is that there is some overhead in calling an external program to get the substitutes info. For instance, "nix-env -qas" takes a bit longer. Abolishing the substitutes table also makes the logic in local-store.cc simpler, as we don't need to store info for invalid paths. On the downside, you cannot do things like "nix-store -qR" on a substitutable but invalid path (but nobody did that anyway). * Never catch interrupts (the Interrupted exception).
2007-05-01 * Set a terminate() handler to ensure that we leave the BDBEelco Dolstra1-3/+17
environment cleanly even when an exception is thrown from a destructor. We still crash, but we don't take all other Nix processes with us.
2007-03-19 * Terminate build hooks and substitutes with a TERM signal, not a KILLEelco Dolstra1-4/+12
signal. This is necessary because those processes may have joined the BDB environment, so they have to be given a chance to clean up. (NIX-85)
2007-02-21 * `nix-store --import': import an archive created by `nix-storeEelco Dolstra1-5/+5
--export' into the Nix store, and optionally check the cryptographic signatures against /nix/etc/nix/signing-key.pub. (TODO: verify against a set of public keys.)
2007-02-21 * `nix-store --export --sign': sign the Nix archive using the RSA keyEelco Dolstra1-3/+12
in /nix/etc/nix/signing-key.sec
2006-12-07 * Move setuidCleanup() to libutil.Eelco Dolstra1-0/+16
2006-12-07 * Change the ownership of store paths to the Nix account beforeEelco Dolstra1-1/+1
deleting them using the setuid helper.
2006-12-07 * Move killUser() to libutil so that the setuid helper can use it.Eelco Dolstra1-0/+47
2006-12-05 * The determination of the root set should be made by the privilegedEelco Dolstra1-0/+1
process, so forward the operation. * Spam the user about GC misconfigurations (NIX-71). * findRoots: skip all roots that are unreadable - the warnings with which we spam the user should be enough.
2006-12-04 * Daemon mode (`nix-worker --daemon'). Clients connect to the serverEelco Dolstra1-14/+3
via the Unix domain socket in /nix/var/nix/daemon.socket. The server forks a worker process per connection. * readString(): use the heap, not the stack. * Some protocol fixes.
2006-12-03 * Pid::kill() should be interruptable.Eelco Dolstra1-1/+3
2006-12-03 * Some hackery to propagate the worker's stderr and exceptions to theEelco Dolstra1-1/+10
client.
generated by cgit-pink 1.4.1 (git 2.44.2) at 2024-12-30T12·11+0000