depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2015-11-19	src/libstore/build.cc: clarify error message for hash mismatches	Peter Simons	1	-1/+1
	Nix reports a hash mismatch saying: output path ‘foo’ should have sha256 hash ‘abc’, instead has ‘xyz’ That message is slightly ambiguous and some people read that statement to mean the exact opposite of what it is supposed to mean. After this patch, the message will be: Nix expects output path ‘foo’ to have sha256 hash ‘abc’, instead it has ‘xyz’
2015-11-09	Add option to verify build determinism	Eelco Dolstra	2	-12/+64
	Passing "--option build-repeat <N>" will cause every build to be repeated N times. If the build output differs between any round, the build is rejected, and the output paths are not registered as valid. This is primarily useful to verify build determinism. (We already had a --check option to repeat a previously succeeded build. However, with --check, non-deterministic builds are registered in the DB. Preventing that is useful for Hydra to ensure that non-deterministic builds don't end up getting published at all.)
2015-11-09	Revert "Allow using /bin and /usr/bin as impure prefixes on non-darwin by ↵	Eelco Dolstra	1	-1/+1
	default" This reverts commit 79ca5033329053caa364bb2f7e50953f859cc97f. Ouch, never noticed this. We definitely don't want to allow builds to have arbitrary access to /bin and /usr/bin, because then they can (for instance) bring in a bunch of setuid programs. Also, we shouldn't be encouraging the use of impurities in the default configuration.
2015-11-09	optimizePath(): Detect some .links corruption	Eelco Dolstra	1	-2/+9
	If automatic store optimisation is enabled, and a hard-linked file in the store gets corrupted, then the corresponding .links entry will also be corrupted. In that case, trying to repair with --repair or --repair-path won't work, because the new "good" file will be replaced by a hard link to the corrupted file. We can catch most of these cases by doing a sanity-check on the file sizes.
2015-11-03	fix syntax error	Jude Taylor	1	-1/+1

2015-11-03	darwin: allow reading system locale and zoneinfo	Jude Taylor	1	-2/+6

2015-10-31	allow reading ICU data	Jude Taylor	1	-1/+2

2015-10-30	add special devices to sandbox-defaults	Jude Taylor	1	-1/+4

2015-10-30	<nix/fetchurl.nix>: Support xz-compressed NARs	Eelco Dolstra	1	-0/+3

2015-10-30	<nix/fetchurl.nix>: Support downloading and unpacking NARs	Eelco Dolstra	1	-3/+14
	This removes the need to have multiple downloads in the stdenv bootstrap process (like a separate busybox binary for Linux, or curl/mkdir/sh/bzip2 for Darwin). Now all those files can be combined into a single NAR.
2015-10-29	int2String() -> std::to_string()	Eelco Dolstra	2	-3/+3

2015-10-21	use nixDataDir instead of appending /share to PREFIX	Jude Taylor	1	-1/+1

2015-10-21	clarifying comment	Jude Taylor	1	-1/+5

2015-10-21	move preBuildHook defaulting to globals.cc	Jude Taylor	2	-7/+5

2015-10-21	restore old DEFAULT_ALLOWED_IMPURE_PREFIXES	Jude Taylor	1	-1/+1

2015-10-21	Add resolve-system-dependencies.pl	Jude Taylor	2	-1/+8

2015-10-21	remove usr paths from allowed inputs	Jude Taylor	1	-2/+0

2015-10-21	allow access to SystemVersion for python builders	Jude Taylor	1	-0/+1

2015-10-21	fix line reading in preBuildHook	Jude Taylor	1	-1/+1

2015-10-21	remove sandbox defaults into a new file	Jude Taylor	3	-65/+62

2015-10-21	restore allowed impure prefixes	Jude Taylor	1	-1/+1

2015-10-21	remove an unneeded default impure-dep	Jude Taylor	1	-1/+0

2015-10-21	make sandbox builds more permissive	Jude Taylor	1	-2/+2

2015-10-21	add a few more permissions	Jude Taylor	1	-3/+45

2015-10-21	Allow builtin fetchurl regardless of the derivation's system attribute	Eelco Dolstra	1	-12/+13

2015-10-21	Show progress indicator for builtin fetchurl	Eelco Dolstra	3	-4/+7

2015-10-21	Disable TLS verification for builtin fetchurl	Eelco Dolstra	3	-11/+31
	This makes it consistent with the Nixpkgs fetchurl and makes it work in chroots. We don't need verification because the hash of the result is checked anyway.
2015-10-21	Fix segfault in builtin fetchurl	Eelco Dolstra	1	-3/+7
	The stack allocated for the builder was way too small (32 KB). This is sufficient for normal derivations, because they just do some setup and then exec() the actual builder. But for the fetchurl builtin derivation it's not enough. Also, allocating the stack on the caller's stack was fishy business.
2015-10-08	Allow building ARMv6 stuff on ARMv7	Tuomas Tynkkynen	1	-0/+1
	This allows building a Raspberry Pi image on modern, faster boards.
2015-10-08	Revert to CURLOPT_PROGRESSFUNCTION	Eelco Dolstra	1	-5/+5
	CURLOPT_XFERINFOFUNCTION isn't widely supported yet. http://hydra.nixos.org/build/26679495
2015-10-07	Show progress during downloads	Eelco Dolstra	1	-7/+47

2015-10-06	nix-store --serve: Implement log size limit	Eelco Dolstra	2	-2/+4

2015-09-18	Shut up clang warnings	Eelco Dolstra	3	-62/+63

2015-09-03	Implement buildDerivation() via the daemon	Eelco Dolstra	2	-2/+11

2015-09-02	Filter build-chroot-dirs entries that conflict with derivation outputs	Eelco Dolstra	1	-4/+4
	Fixes https://github.com/NixOS/nixpkgs/issues/9504. Note that this means we may have a non-functional /bin/sh in the chroot while rebuilding Bash or one of its dependencies. Ideally those packages don't rely on /bin/sh though.
2015-09-02	Remove unused variable	Eelco Dolstra	1	-5/+0

2015-08-24	Prevent .chroot from being GC'ed when using LocalStore::buildDerivation()	Eelco Dolstra	1	-0/+4
	Fixes #616.
2015-08-21	nix-collect-garbage: Revive --max-freed	Eelco Dolstra	2	-15/+4
	Fixes #609.
2015-08-19	Remove unneeded HAVE_UNSHARE.	Manolis Ragkousis	1	-1/+1
	* src/libstore/build.cc (CHROOT_ENABLED): Remove HAVE_UNSHARE.
2015-08-04	Don't include <iostream> before config.h	Eelco Dolstra	1	-2/+2
	This breaks the build on 32-bit systems. http://hydra.nixos.org/build/24373658
2015-08-03	Handle debug messages from runChild()	Eelco Dolstra	1	-10/+16
	Turns out that "nix-build -vvv" with chroots enabled has been broken for some time, because some debug message got interpreted as an error.
2015-07-26	Remove unnecessary parentheses	Eelco Dolstra	1	-2/+2

2015-07-23	Fix fetchurl of executable file	Eelco Dolstra	1	-1/+1
	Pointed out by @cstrahan, thanks!
2015-07-21	Fix Darwin build	Eelco Dolstra	1	-1/+4
	Turns out getgrouplist() is not POSIX. http://hydra.nixos.org/build/23881243
2015-07-20	Make <nix/fetchurl.nix> a builtin builder	Eelco Dolstra	6	-4/+317
	This ensures that 1) the derivation doesn't change when Nix changes; 2) the derivation closure doesn't contain Nix and its dependencies; 3) we don't have to rely on ugly chroot hacks.
2015-07-20	Provide more detailed info about build status to hydra-queue-runner	Eelco Dolstra	2	-47/+75
	In particular, hydra-queue-runner can now distinguish between remote build / substitution / already-valid. For instance, if a path already existed on the remote side, we don't want to store a log file.
2015-07-20	nix-copy-closure: Add -v flag	Eelco Dolstra	1	-1/+3
	And make exportPath() less spammy by default.
2015-07-20	More cleanup	Eelco Dolstra	3	-115/+68

2015-07-17	OCD: foreach -> C++11 ranged for	Eelco Dolstra	11	-335/+331

2015-07-17	Allow remote builds without sending the derivation closure	Eelco Dolstra	8	-143/+300
	Previously, to build a derivation remotely, we had to copy the entire closure of the .drv file to the remote machine, even though we only need the top-level derivation. This is very wasteful: the closure can contain thousands of store paths, and in some Hydra use cases, include source paths that are very large (e.g. Git/Mercurial checkouts). So now there is a new operation, StoreAPI::buildDerivation(), that performs a build from an in-memory representation of a derivation (BasicDerivation) rather than from a on-disk .drv file. The only files that need to be in the Nix store are the sources of the derivation (drv.inputSrcs), and the needed output paths of the dependencies (as described by drv.inputDrvs). "nix-store --serve" exposes this interface. Note that this is a privileged operation, because you can construct a derivation that builds any store path whatsoever. Fixing this will require changing the hashing scheme (i.e., the output paths should be computed from the other fields in BasicDerivation, allowing them to be verified without access to other derivations). However, this would be quite nice because it would allow .drv-free building (e.g. "nix-env -i" wouldn't have to write any .drv files to disk). Fixes #173.