about summary refs log tree commit diff
path: root/src/libexpr
AgeCommit message (Collapse)AuthorFilesLines
2014-01-14 Bare dynamic attrs: Match interpolation semanticsShea Levy1-1/+1
Signed-off-by: Shea Levy <shea@shealevy.com>
2014-01-14 Allow "bare" dynamic attrsShea Levy2-0/+3
Now, in addition to a."${b}".c, you can write a.${b}.c (applicable wherever dynamic attributes are valid). Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 Don't use any syntactic sugar for dynamic attrsShea Levy4-128/+68
This doesn't change any functionality but moves some behavior out of the parser and into the evaluator in order to simplify the code. Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 Fold dynamic binds handling into addAttrShea Levy1-55/+35
Since addAttr has to iterate through the AttrPath we pass it, it makes more sense to just iterate through the AttrNames in addAttr instead. As an added bonus, this allows attrsets where two dynamic attribute paths have the same static leading part (see added test case for an example that failed previously). Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 Dynamic attrsShea Levy4-23/+238
This adds new syntax for attribute names: * attrs."${name}" => getAttr name attrs * attrs ? "${name}" => isAttrs attrs && hasAttr attrs name * attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def * { "${name}" = value; } => listToAttrs [{ inherit name value; }] Of course, it's a bit more complicated than that. The attribute chains can be arbitrarily long and contain combinations of static and dynamic parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively straightforward for the getAttrs/hasAttrs cases but is more complex for the listToAttrs case due to rules about duplicate attribute definitions. For attribute sets with dynamic attribute names, duplicate static attributes are detected at parse time while duplicate dynamic attributes are detected when the attribute set is forced. So, for example, { a = null; a.b = null; "${"c"}" = true; } will be a parse-time error, while { a = {}; "${"a"}".b = null; c = true; } will be an eval-time error (technically that case could theoretically be detected at parse time, but the general case would require full evaluation). Moreover, duplicate dynamic attributes are not allowed even in cases where they would be with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but { a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction might be relaxed in the future in cases where the static variant would not be an error, but it is not obvious that that is desirable. Finally, recursive attribute sets with dynamic attributes have the static attributes in scope but not the dynamic ones. So rec { a = true; "${"b"}" = a; } is equivalent to { a = true; b = true; } but rec { "${"a"}" = true; b = a; } would be an error or use a from the surrounding scope if it exists. Note that the getAttr, getAttr or default, and hasAttr are all implemented purely in the parser as syntactic sugar, while attribute sets with dynamic attribute names required changes to the AST to be implemented cleanly. This is an alternative solution to and closes #167 Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 Add the ExprBuiltin Expr type to the ASTShea Levy4-9/+36
Certain desugaring schemes may require the parser to use some builtin function to do some of the work (e.g. currently `throw` is used to lazily cause an error if a `<>`-style path is not in the search path) Unfortunately, these names are not reserved keywords, so an expression that uses such a syntactic sugar will not see the expected behavior (see tests/lang/eval-okay-redefine-builtin.nix for an example). This adds the ExprBuiltin AST type, which when evaluated uses the value from the rootmost variable scope (which of course is initialized internally and can't shadow any of the builtins). Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-10 Bump language version for new storePath featureShea Levy1-1/+1
This will allow e.g. channel expressions to use builtins.storePath IFF it is safe to do so without knowing if the path is valid yet. Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-10 builtins.storePath: Try to substitute the path if it is not yet validShea Levy1-2/+2
Signed-off-by: Shea Levy <shea@shealevy.com>
2013-11-19 Check meta values and warn about bad onesEelco Dolstra2-2/+22
2013-11-19 Generalise meta attributesEelco Dolstra2-87/+118
2013-11-19 Shorter error messageEelco Dolstra1-2/+1
2013-11-19 Refactor JSON outputEelco Dolstra2-13/+56
2013-11-19 Add a toJSON primopEelco Dolstra6-24/+150
2013-11-18 Add a primop unsafeGetAttrPos to return the position of an attributeEelco Dolstra4-6/+37
2013-11-18 Add a symbol __curPos that expands to the current source locationEelco Dolstra5-2/+37
I.e. an attribute set { file = <string>; line = <int>; column = <int>; }.
2013-11-18 Support quoted attribute names in -AEelco Dolstra1-10/+34
This is requires if you have attribute names with dots in them. So you can now say: $ nix-instantiate '<nixos>' -A 'config.systemd.units."postgresql.service".text' --eval-only Fixes #151.
2013-11-12 Make function calls show up in stack traces againEelco Dolstra1-20/+28
Note that adding --show-trace prevents functions calls from being tail-recursive, so an expression that evaluates without --show-trace may fail with a stack overflow if --show-trace is given.
2013-11-12 Make function calls tail-recursiveEelco Dolstra4-40/+65
2013-11-12 Make ifs and asserts tail-recursiveEelco Dolstra2-4/+11
The local Value object prevented g++ from making a tail call. Not clear why. In any case, not using a temporary makes g++ do the tail call.
2013-11-12 Get rid of an intermediary on the stackEelco Dolstra2-13/+17
2013-10-28 Fix building without a garbage collectorEelco Dolstra1-5/+5
http://hydra.nixos.org/build/6695350
2013-10-28 Fix a segfault in genericClosureEelco Dolstra1-16/+25
It kept temporary data in STL containers that were not scanned by Boehm GC, so Nix programs using genericClosure could randomly crash if the garbage collector kicked in at a bad time. Also make it a bit more efficient by copying points to values rather than values.
2013-10-28 Slightly optimize listToAttrsEelco Dolstra3-9/+10
2013-10-24 Rename "attribute sets" to "sets"Eelco Dolstra8-54/+47
We don't have any other kind of sets so calling them attribute sets is unnecessarily verbose.
2013-10-24 Remove unnecessary call to forceStringNoCtxEelco Dolstra1-1/+1
2013-10-24 Add a typeOf primopEelco Dolstra1-3/+28
We already have some primops for determining the type of a value, such as isString, but they're incomplete: for instance, there is no isPath. Rather than adding more isBla functions, the generic typeOf function returns a string representing the type of the argument (e.g. "int").
2013-10-24 Don't require NIX_SHOW_STATS for NIX_COUNT_CALLSEelco Dolstra1-0/+1
2013-10-23 Memoize evalFile() lookups under both the original and resolved nameEelco Dolstra1-4/+9
Previously we only used the resolved name, causing repeated resolution (e.g. /dir to /dir/default.nix).
2013-10-17 Fold two stack trace messages in derivationsEelco Dolstra1-4/+2
Combined with the previous changes, stack traces involving derivations are now much less verbose, since something like while evaluating the builtin function `getAttr': while evaluating the builtin function `derivationStrict': while instantiating the derivation named `gtk+-2.24.20' at `/home/eelco/Dev/nixpkgs/pkgs/development/libraries/gtk+/2.x.nix:11:3': while evaluating the derivation attribute `propagatedNativeBuildInputs' at `/home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/default.nix:78:17': while evaluating the attribute `outPath' at `/nix/store/212ngf4ph63mp6p1np2bapkfikpakfv7-nix-1.6/share/nix/corepkgs/derivation.nix:18:9': ... now reads while evaluating the attribute `propagatedNativeBuildInputs' of the derivation `gtk+-2.24.20' at `/home/eelco/Dev/nixpkgs/pkgs/development/libraries/gtk+/2.x.nix:11:3': ...
2013-10-17 Don't show <nix/derivation.nix> in stack tracesEelco Dolstra3-2/+5
Messages like while evaluating the attribute `outPath' at `/nix/store/212ngf4ph63mp6p1np2bapkfikpakfv7-nix-1.6/share/nix/corepkgs/derivation.nix:18:9': are redundant, because Nix already shows that it's evaluating a derivation: while instantiating the derivation named `firefox-24.0' at `/home/eelco/Dev/nixpkgs/pkgs/applications/networking/browsers/firefox/default.nix:131:5': while evaluating the derivation attribute `nativeBuildInputs' at `/home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/default.nix:76:17':
2013-10-17 Ensure proper type checking/coercion of "${expr}"Eelco Dolstra1-2/+3
Now we only rewrite "${expr}" to expr if expr is a string literal.
2013-10-17 Revert the behaviour of antiquoted paths to pre-Nix 1.6Eelco Dolstra1-4/+4
Commit 159e621d1a9c4391b53f3d822109c36931934698 accidentally changed the behaviour of antiquoted paths, e.g. "${/foo}/bar" used to evaluate to "/nix/store/<hash>-foo/bar" (where /foo gets copied to the store), but in Nix 1.6 it evaluates to "/foo/bar". This is inconsistent, since " ${/foo}/bar" evaluates to " /nix/store/<hash>-foo/bar". So revert to the old behaviour.
2013-10-08 printStats(): Print the size of the symbol table in bytesEelco Dolstra3-0/+15
2013-10-08 Deduplicate filenames in PosEelco Dolstra3-6/+7
This saves ~4 MiB of RAM for NixOS system instantiation, and ~18 MiB for "nix-env -qa".
2013-10-08 Treat undefined variable errors consistentlyEelco Dolstra3-2/+8
Previously, a undefined variable inside a "with" caused an EvalError (which can be caught), while outside, it caused a ParseError (which cannot be caught). Now both cause an UndefinedVarError (which cannot be caught).
2013-10-08 Show the exact position of undefined variablesEelco Dolstra4-21/+18
In particular, undefined variable errors in a "with" previously didn't show *any* position information, so this should help a lot in those cases.
2013-10-08 Remove some unused functionsEelco Dolstra1-15/+0
2013-10-08 Merge VarRef into ExprVarEelco Dolstra4-21/+8
2013-10-07 Don't show calls to primops in stack tracesEelco Dolstra1-6/+1
Since they don't have location information, they just give you crap like: while evaluating the builtin function `getAttr': while evaluating the builtin function `derivationStrict': ...
2013-10-02 Fix segfault in nix-repl / hydra-eval-jobsEelco Dolstra1-3/+3
If a "with" attribute set fails to evaluate, we have to make sure its Env record remains unchanged. Otherwise, repeated evaluation gives a segfault: nix-repl> :a with 0; { a = x; b = x; } Added 2 variables. nix-repl> a error: value is an integer while an attribute set was expected nix-repl> b Segmentation fault
2013-09-03 nix-env: Use wildcard match by defaultEelco Dolstra1-5/+4
That is, you don't need to pass '*' anymore, so nix-env -qa is equivalent to nix-env -qa '*'
2013-09-03 nix-env: Load files in ~/.nix-defexpr on demandEelco Dolstra2-0/+12
So if you do "nix-env -qa -A nixos", then other channels won't be parsed/evaluated at all.
2013-09-03 Work on Values instead of ExprsEelco Dolstra2-19/+20
This prevents some duplicate evaluation in nix-env and nix-instantiate. Also, when traversing ~/.nix-defexpr, only read regular files with the extension .nix. Previously it was reading files like .../channels/binary-caches/<name>. The only reason this didn't cause problems is pure luck (namely, <name> shadows an actual Nix expression, the binary-caches files happen to be syntactically valid Nix expressions, and we iterate over the directory contents in just the right order).
2013-09-03 Get rid of the parse tree cacheEelco Dolstra4-31/+32
Since we already cache files in normal form (fileEvalCache), caching parse trees is redundant. Note that getting rid of this cache doesn't actually save much memory at the moment, because parse trees are currently not freed / GC'ed.
2013-09-02 Add some support code for nix-replEelco Dolstra3-12/+26
2013-09-02 Get rid of a signedness warningEelco Dolstra1-1/+1
2013-09-02 Fix whitespaceEelco Dolstra8-82/+82
2013-08-26 Simplify inherited attribute handlingShea Levy5-38/+21
This reduces the difference between inherited and non-inherited attribute handling to the choice of which env to use (in recs and lets) by setting the AttrDef::e to a new ExprVar in the parser rather than carrying a separate AttrDef::v VarRef member. As an added bonus, this allows inherited attributes that inherit from a with to delay forcing evaluation of the with's attributes. Signed-off-by: Shea Levy <shea@shealevy.com>
2013-08-26 Fix typos, especially those that end up in the Nix manualIvan Kozik1-1/+1
2013-08-19 Store Nix integers as longsEelco Dolstra7-14/+19
So on 64-bit systems, integers are now 64-bit. Fixes #158.
generated by cgit-pink 1.4.1 (git 2.44.2) at 2024-12-26T03·46+0000