depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2010-12-15	* Disable X11 forwarding, it's not needed.	Eelco Dolstra	1	-0/+2

2010-12-15	* nix-copy-closure: make sure that the shell doesn't do globbing of	Eelco Dolstra	1	-6/+6
	`+' and `?' in filenames. This is very slow if /nix/store is very large. (This is a quick hack - a cleaner solution would be to bypass the shell entirely.)
2010-12-13	* nix-instantiate: return exit status 100 to denote a permanent build	Eelco Dolstra	1	-7/+7
	failure. The build hook can use this to distinguish between transient and permanent failures on the remote side.
2010-12-13	* When doing a query (e.g. `nix-store -r --dry-run'), don't make a lot	Eelco Dolstra	1	-4/+12
	of expensive calls to `nix-store --check-validity'.
2010-12-07	* Bad things happen when a filehandle has the same name as a module.	Eelco Dolstra	1	-2/+2

2010-12-05	* Use CamelCase for the Perl modules.	Eelco Dolstra	11	-17/+16

2010-12-05	* Add a script `nix-generate-patches'.	Eelco Dolstra	2	-2/+45
	* Fix the binary patching test.
2010-11-29	* Move the patch generator into a module.	Eelco Dolstra	4	-437/+345

2010-11-29	* Don't generate patches if the system type differs.	Eelco Dolstra	2	-2/+13

2010-11-29	* Impose a configurable time limit on patch generation. This is	Eelco Dolstra	1	-6/+12
	necessary because bsdiff has some pathological worst-case behaviour, e.g. O(n^2) on files consisting only of 0s.
2010-11-17	* Oops.	Eelco Dolstra	1	-1/+1

2010-11-17	* When checking whether a patch is applicable, for efficiency, use	Eelco Dolstra	1	-3/+7
	`nix-store -q --hash' to get the hash of the base path rather than `nix-hash'. However, only do this for estimating the size of a download, not for the actual substitution, because sometimes the contents of store paths are modified (which they shouldn't, of course).
2010-11-17	* In the download size indication, take binary patches into account.	Eelco Dolstra	1	-144/+161
	Hopefully this doesn't slow things down too much.
2010-11-17	* Before a build, show the disk space that the downloaded store paths	Eelco Dolstra	3	-17/+18
	will approximately require.
2010-11-17	* Store the NAR size in the manifest.	Eelco Dolstra	2	-1/+7

2010-11-17	* nix-push: no need to compute the NAR hash, since the Nix database	Eelco Dolstra	1	-7/+5
	already has it (`nix-store -q --hash').
2010-10-04	* Don't use SSH's `-tt' flag because it doesn't seem to work	Eelco Dolstra	1	-6/+10
	on OpenSolaris when using connection sharing. Instead have the remote side check for disconnection and kill the process group when that happens.
2010-08-31	* Always print hook output on stderr, even if --no-build-output is	Eelco Dolstra	1	-2/+5
	set. * In the build hook, print a trace message to allow Hydra to pick up the name of the remote machine used for the build.
2010-08-30	* When using the build hook, distinguish between the stderr of the	Eelco Dolstra	2	-3/+8
	hook script proper, and the stdout/stderr of the builder. Only the latter should be saved in /nix/var/log/nix/drvs. * Allow the verbosity to be set through an option. * Added a flag --quiet to lower the verbosity level.
2010-08-27	* Experimental feature: allow a derivation to tell the build hook that	Eelco Dolstra	1	-10/+17
	it requires a certain feature on the build machine, e.g. requiredSystemFeatures = [ "kvm" ]; We need this in Hydra to make sure that builds that require KVM support are forwarded to machines that have KVM support. Probably this should also be enforced for local builds.
2010-08-25	* Made the build hook mechanism more efficient. Rather than starting	Eelco Dolstra	1	-125/+125
	the hook every time we want to ask whether we can run a remote build (which can be very often), we now reuse a hook process for answering those queries until it accepts a build. So if there are N derivations to be built, at most N hooks will be started.
2010-08-25	* Don't call "cat".	Eelco Dolstra	1	-7/+4

2010-08-25	* In the build hook, temporarily register the derivation and its	Eelco Dolstra	1	-5/+23
	output as GC roots. This prevents a race if the garbage collector is running during the build.
2010-08-24	* Correctly handle SSH failing to establish a connection. Because	Eelco Dolstra	1	-4/+7
	this didn't work right, the build hook wouldn't fall back to using other machines of the desired type.
2010-08-11	* nix-build: recognise --cores.	Eelco Dolstra	1	-1/+1

2010-08-04	* Sync with the trunk.	Eelco Dolstra	1	-16/+24

2010-07-21	* Don't barf if the source NAR for a patch has disappeared.	Eelco Dolstra	1	-1/+6

2010-06-23	* Ignore packages that don't have a version.	Eelco Dolstra	1	-15/+18
	* Work on a manifest instead of a channel directory.
2010-06-22	* Sync.	Eelco Dolstra	1	-2/+2

2010-06-22	* Pass `--fallback' to the remote build to ignore failing	Eelco Dolstra	1	-2/+2
	substituters.
2010-04-26	* Fix the copy-from-other-stores substituter.	Eelco Dolstra	1	-34/+24

2010-03-05	* nix-prefetch-url depends on sed (see	Eelco Dolstra	1	-1/+1
	http://hydra.nixos.org/build/311170).
2010-02-16	* Since Hydra now escapes `+', `=' and `?' to %NN in URIs,	Eelco Dolstra	1	-1/+4
	nix-prefetch-url should unescape them, because `%' is not a valid character in store path names.
2010-02-04	* "Fix" incorrect help message.	Eelco Dolstra	1	-1/+1

2010-02-04	* Don't use ssh's -f flag since it leads to lots of lingering ssh	Eelco Dolstra	1	-2/+12
	processes.
2010-02-04	* Doh! The scope of $slotLock should extend to the end of the script,	Eelco Dolstra	1	-1/+2
	because otherwise the lock will be released at the end of the while loop.
2010-02-04	* Typo.	Eelco Dolstra	1	-1/+1

2010-02-04	* Doh! Calling `system' in an END block causes the exit status in $?	Eelco Dolstra	1	-1/+1
	to be changed to 0.
2010-02-04	* Remove the `cat' calls when not using --gzip.	Eelco Dolstra	1	-7/+7

2010-02-04	* Revert r19796 for now.	Eelco Dolstra	1	-1/+1

2010-02-03	* Respect @sysconfdir@.	Eelco Dolstra	1	-1/+1

2010-02-03	* In the build hook, if connecting to a machine fails, try the other	Eelco Dolstra	3	-73/+77
	machines of the right type (if available). This makes the build farm more robust to failures.
2010-02-03	* Use SSH connection sharing in the remote build script.	Eelco Dolstra	1	-36/+16
	* Removed the Cygwin password hack since the problem is apparently fixed in Visual Studio.
2010-02-03	* nix-copy-closure: start only one SSH connection to the server, or	Eelco Dolstra	3	-5/+49
	recycle an already existing connection (using OpenSSH's connection sharing feature).
2010-02-02	* Don't do a chdir to $tmpDir. It's not necessary, and Windows doesn't	Eelco Dolstra	1	-2/+0
	support deleting the current directory.
2010-01-25	* Disable gzip compression in build-remote.pl because it puts too much	Eelco Dolstra	1	-2/+2
	load on the Hydra build farm (where it's unnecessary anyway because it has a fast connection to the build machines). In any case, compression can be enabled by using the `-C' option to ssh.
2009-12-09	* When doing a nix-pull, remove old manifests downloaded from the same	Eelco Dolstra	2	-8/+23
	URL. This prevents lots of old cruft accumulating in /nix/var/nix/manifests.
2009-12-09	* nix-build: be less verbose.	Eelco Dolstra	1	-1/+8

2009-11-17	* Don't pass -K. It should really inherit the setting of the calling	Eelco Dolstra	1	-1/+1
	Nix though.
2009-11-13	* In nix-pull/nix-channel, create the manifests directory if it	Eelco Dolstra	2	-0/+9
	doesn't exist. The Debian packages don't include the manifests directory, so nix-channel would silently skip doing a nix-pull, resulting in everything being built from source. Thanks to Juan Pedro Bolívar Puente.