depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2019-07-25	Add default for USER when unset	Matthew Bauer	1	-1/+1
	uses $(id -u -n) when USER is unset, this is needed on some weird setups in Docker. Fixes #971
2019-05-15	Fix shellcheck error	Eelco Dolstra	1	-1/+1
	https://hydra.nixos.org/build/93359951
2019-05-08	Merge pull request #2594 from LnL7/darwin-10.12.6	Graham Christensen	1	-3/+5
	installer: update macOS version check to 10.12.2
2019-05-01	Merge pull request #2679 from bjornfor/offline-install	Eelco Dolstra	1	-1/+4
	install script: don't abort when "nix-channel --update" fails
2019-02-22	remove noop uses of nix-store --init	zimbatm	1	-6/+0
	the nix-store --init command is a noop apparently
2019-02-20	install script: don't abort when "nix-channel --update" fails	Bjørn Forsman	1	-1/+4
	Instead, print a message about what happened and tell the user what can be done (run "[sudo -i] nix-channel --update nixpkgs" again at a later time). This change allows installing Nix when you're offline. Since the multi-user installer is so verbose, the message isn't printed until the end. Fixes issue #2650 ("installation without internet connection").
2018-12-20	installer: update macOS version check to 10.12.2	Daiderd Jordan	1	-3/+5
	Nixpkgs will drop support for <10.12 soon and thus a nix release built using the 19.03 channel will also require a newer version of macOS.
2018-09-01	Default to single-user install	Graham Christensen	1	-11/+14

2018-04-19	installer: default to the daemon installor for Linux with systemd	Graham Christensen	1	-1/+1
	Note: don't backport to 2.0-maintenance
2018-04-19	installer: allow opting in / out to the daemon installer	Graham Christensen	1	-6/+31
	By passing --daemon or --no-daemon, the installer can be forced to select one or the other installation options, despite what the automatic detection can provide. This commit can be backported to 2.0-maintenance because it explicitly turns off the daemon installation for Linux under systemd.
2018-03-29	Expand the multi-user installer to support Linuxes with systemd	Graham Christensen	1	-2/+9
	- darwin installer: delete hardware report, not necessary - moves os-specific code from the darwin installer to to `poly_*` functions - adds profile.d support to the profile targets, which automatically handles many distros which don't have a /etc/bashrc but do have an /etc/profile.d - /bin/bash -> /usr/bin/env bash - document why each excluded shellcheck check is excluded - rename the multi-user to Daemon-based
2017-07-30	Replace Unicode quotes in user-facing strings by ASCII	Jörg Thalheim	1	-2/+2
	Relevant RFC: NixOS/rfcs#4 $ ag -l \| xargs sed -i -e "/\"/s/’/'/g;/\"/s/‘/'/g"
2017-07-14	Address feedback around printf & exec	Graham Christensen	1	-1/+1

2017-07-14	Switch to a fancy multi-user installer on Darwin	Graham Christensen	1	-7/+17

2017-01-25	bail out if macOS 10.9 or lower is used during installer	Domen Kožar	1	-0/+7

2016-12-19	shellcheck scripts/install-nix-from-closure.sh	James Broadhead	1	-9/+9

2016-11-26	Revert "Get rid of unicode quotes (#1140)"	Eelco Dolstra	1	-2/+2
	This reverts commit f78126bfd6b6c8477fcdbc09b2f98772dbe9a1e7. There really is no need for such a massive change...
2016-11-25	Get rid of unicode quotes (#1140)	Guillaume Maudoux	1	-2/+2

2016-11-03	installation: allow profile modification to be skipped (#1072)	Manav Rathi	1	-13/+17
	The current behaviour modifies the first writeable file from amongst .bash_profile, .bash_login and .profile. So .bash_profile (if it is writable) would be modified even if a user has already sourced nix.sh in, say, .profile. This commit introduces a new environment variable, NIX_INSTALLER_NO_MODIFY_PROFILE. If this is set during installation, then the modifications are unconditionally skipped. This is useful for users who have a manually curated set of dotfiles that they are porting to a new machine. In such scenarios, nix.sh is already sourced at a place where the user prefers. Without this change, the nix installer would insist on modifying .bash_profile if it exists. This commit also add documentations for both the current behaviour and the new override.
2016-10-13	SSL_CERT_FILE -> NIX_SSL_CERT_FILE	Eelco Dolstra	1	-2/+2
	This prevents collisions with the "native" OpenSSL, in particular on OS X. Fixes #921.
2016-05-31	Fix reference to $NIX_LINK	Eelco Dolstra	1	-1/+1

2016-05-18	Fix `??` in Nix warning message	Gabriel Gonzalez	1	-1/+1
	Nix sometimes outputs a warning message like this: ``` directory /nix does not exist; creating it by running ‘?? using sudo ``` ... when it really meant to output something that looked like this: ``` directory /nix does not exist; creating it by running 'mkdir -m 0755 /nix && chown gabriel /nix' using sudo ``` The reason why is due to some bizarre behavior in Bash where it will translate anything of the form `$x’` to `??`, leading to the incorrect warning message. I don't know what is the origin of this Bash behavior, but the easiest fix is to just use ASCII quotes instead of unicode quotes.
2016-04-14	install-nix-from-closure: Don't run nix-store --verify	Eelco Dolstra	1	-5/+0
	Verification is slow. Also, we really shouldn't advise users to nuke their store.
2016-04-10	Remove information about nix-store --optimise	Wout Mertens	1	-9/+0

2016-04-10	Always verify nix store on install	wmertens	1	-1/+18
	Just wasted a couple hours chasing shadows because the nix store got corrupted and there was no indication of that anywhere. Since an install is one-time only, might as well verify. Optimization showed that the copied files aren't read-only; fixed that as well. Also, use /bin/sh since there's a good chance that this script will be run on systems without /bin/bash
2016-02-19	Merge branch 'master' of git://github.com/stepcut/nix	Shea Levy	1	-1/+1

2016-02-10	Check shell profile is writeable before modifying	Alex Cruice	1	-1/+1
	The `set -e` at the top of the script causes the installation to fail to complete if the shell profile is not writeable. Checking file existence only is not enough.
2015-12-06	Clarify installation error message that is shown when /nix/store exists but ↵	Jeremy Shaw	1	-1/+1
	is not writable by the user
2015-06-08	Update cacert locations	Eelco Dolstra	1	-1/+1

2015-02-11	Nix install script failed when "cd" printed to stdout.	Jeff Ramnani	1	-1/+1
	In some cases the bash builtin command "cd" can print the variable $CWD to stdout. This caused the install script to fail while copying files because the source path was wrong. Fixes #476.
2014-12-13	Install cacert before running nix-channel	Eelco Dolstra	1	-5/+6
	Also, make it more robust against incorrent SSL_CERT_FILE values.
2014-12-10	Include cacert in the binary tarball	Eelco Dolstra	1	-2/+5
	This prevents having to fetch Nixpkgs or cacert over http.
2014-12-10	Always use https to fetch the Nixpkgs channel	Eelco Dolstra	1	-5/+1

2014-11-18	Add a test for the binary tarball installer	Eelco Dolstra	1	-2/+4

2014-08-20	Use proper quotes everywhere	Eelco Dolstra	1	-3/+3

2014-08-07	install-nix-from-closure.sh: Use https channel if possible	Eelco Dolstra	1	-1/+5

2014-07-29	install-nix-from-closure.sh: Install cacert	Eelco Dolstra	1	-0/+3

2014-04-10	Don't barf when installing as root	Eelco Dolstra	1	-1/+0

2014-02-26	Installer: Handle Darwin	Eelco Dolstra	1	-1/+1
	"cp -r" doesn't copy symlinks properly on Darwin, but "cp -R" does. Fixes #215.
2014-02-10	Force use of Bash	Eelco Dolstra	1	-1/+1
	"echo -n" doesn't work with /bin/sh on Darwin.
2014-02-10	Binary tarball: Automatically create /nix	Eelco Dolstra	1	-17/+94
	The tarball can now be unpacked anywhere. The installation script uses "sudo" to create /nix if it doesn't exist. It also fetches the nixpkgs-unstable channel.
2014-02-10	Binary tarball: Automatically fetch the Nixpkgs channel	Eelco Dolstra	1	-1/+7

2012-05-22	Generate binary tarballs for installing Nix	Eelco Dolstra	1	-0/+34
	For several platforms we don't currently have "native" Nix packages (e.g. Mac OS X and FreeBSD). This provides the next best thing: a tarball containing the closure of Nix, plus a simple script "nix-finish-install" that initialises the Nix database, registers the paths in the closure as valid, and runs "nix-env -i /path/to/nix" to initialise the user profile. The tarball must be unpacked in the root directory. It creates /nix/store/... and /usr/bin/nix-finish-install. Typical installation is as follows: $ cd / $ tar xvf /path/to/nix-1.1pre1234_abcdef-x86_64-linux.tar.bz2 $ nix-finish-install (if necessary add ~/.nix-profile/etc/profile.d/nix.sh to the shell login scripts) After this, /usr/bin/nix-finish-install can be deleted, if desired. The downside to the binary tarball is that it's pretty big (~55 MiB for x86_64-linux).