| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Where it belongs...
|
|
In the spirit of Marie Kondo, I'm tidying up!
TL;DR:
- Prefer .envrc `use_nix` and delete all dir-locals.nix files
- Remove ~all references to <nixpkgs>, <unstable>, <depot> and prefer
referencing each with briefcase.third_party.{pkgs,unstable,depot}
- Delete nixBufferFromShell function since I was only using that in
dir-locals.nix files
|
|
Unforeseen problem: `buildkite-agent` runs its builds in a separate directory,
so if I want the `nix-build` command to build the newly checked out code, I need
to set <briefcase> to the CWD.
|
|
Use the newly defined `buildHaskell` function for a few of my existing Haskell
projects. So far, it works as intended!
|
|
Per the assignment's instructions, the `Shift n` operation should treat
the *entire keyboard* like a cycle and shift that. I was erroneously
treating *each row* like a cycle and shifting those one-by-one.
This change fixes that. In addition, it also:
- Updates README.md with expected inputs and outputs
- Updates test suite
- Adds `split` dependency to {default,shell}.nix
|
|
Tests:
- HorizontalFlip
- VerticalFlip
- Shift n
|
|
TL:DR:
- Remove unused imports: Test.QuickCheck and Control.Exception
- Remove calls to `reverse` and `Utils.rotate` with their results
|
|
TL;DR:
- include a default.nix to allow users to build an named executable
- emphasize in the README that the user needs Nix to build this project
- pin nixpkgs to a specific commit and fetch it from GitHub
|
|
Per my take-home assignment's reviewer's comments, with which for the record I
agree, I should generate the character->coordinate table from my existing qwerty
keyboard definition.
The best part is: by doing this I found a bug: Notice how the original '0'
character was mapped to the Coordinate (0,0)... thus every subsequent digit
key (i.e. the first row) is off-by-one.
|
|
Remember: always read the instructions; that's the most important part.
|
|
Partially optimize inputs and document rules for further optimizations we can
make.
|
|
TL;DR:
- Accept input from the CLI
- Add a project README.md
|
|
Apply the transform to a Keyboard. Onwards to the final demonstration!
|
|
Using Haskell's Text.ParserCombinators.ReadP library for the first time, and I
enjoyed it thoroughly! It's nice avoiding a third-party library like MegaParsec.
|
|
This will help me debug.
|
|
To stylize things...
|
|
As I attempt to habituate TDD, I should have some examples of tests to minimize
all friction preventing me from testing.
|
|
Before starting my take-home assignment, the instructions advised me to create a
"Hello, world" program in the language of my choice. Since I'm choosing Haskell,
I created this example as my starter boilerplate.
|
|
Also rename it advent-of-code-2019 since I expect to participate this year as
well.
TODO: Should directories and files be name like-this or like_this?
|
|
Inconveniently, I do not have the cipher code that I wrote from a previous
chapter, and I'm not eager to reimplement it.
TODO
- Implement encrypt
- Implement decrypt
- Read all characters from STDIN
|
|
- Add new entries
- Change quantities of existing entries
|
|
I was instructed to benchmark these functions, but I couldn't get the
benchmarking library to run using Nix -- although I'm *sure* it's
possible. Unfortunately the book recommends using `stack`, which I couldn't
reproduce.
|
|
I completed most of the exercises for this enlightening chapter in ghci.
|
|
I expect to look back on this code and cringe, but... it compiles!
|
|
Write Functor, Applicative, Monad instances for:
- MaybeT
- EitherT
- ReaderT
|
|
I believe there are two exercises sets in the "Composing Types" chapter. Here
are *some* of my answers so far...
I'm having trouble implementing Foldable for Compose. I was able to implement a
version of it by adding the (Functor f) constraint to the instance signature,
but I think I cheated.
I will revisit these problems as well as the earlier exercises later.
|
|
Refactor the caching policy for the Memo by evicting the elements that have been
the least-recently-accessed.
Python's heapq module default to a min-heap. By storing our heap elements
as (UnixTime, a), we can guarantee that when we call heappop, we will get the
element with the lowest UnixTime value in heap (i.e. the oldest). When we call
heappush, we use (time.time(), key) and these values -- by having the largest
UnixTime, will propogate to the bottom of the min-heap.
|
|
Bound the size of the memo by creating a BoundedQueue. Whenever we add elements
to the BoundedQueue, we remove the oldest elements. We use the BoundedQueue to
control the size of our dictionary that we're using to store our key-value pairs.
|
|
After hearing from a Jane Street recruiter, I decided to dust off some of the
DS&As knowledge. I found this article online, which outlines an example problem
called "Memo":
https://blog.janestreet.com/what-a-jane-street-dev-interview-is-like/
Here's part 1 of the solution in Python.
|
|
Ensure that the export.hs script refers to the .org file.
|
|
It's beautiful how State is just Reader that returns a tuple of (a, r) instead
of just a, allowing you to modify the environment (i.e. state).
```haskell
newtype Reader r a = Reader { runReader :: r -> a }
newtype State s a = State { runState :: s -> (a, s) }
```
|
|
I would've created on at $HOME/.ghci, but I don't need that yet, and I didn't
want to bother with home-manager.
|
|
I feel much more comfortable using `traverse` and `sequenceA`. I even used both
of them in the Haskell program that I wrote at work to export a trix.
|
|
- Change list.txt -> list.org
- Group groceries by category
- Sort categories by store layout
|
|
At this point, I may be taking this idea too far, but what the heck?
|
|
Helps me run my chapter exercises.
|
|
From "Haskell Programming from First Principles"...
I have completed all of the exercises in the book thus far, but I only recently
dedicated a Haskell module for each chapter. Previously I created ad hoc modules
per exercise, per chapter... it was chaotic.
|
|
From "Haskell Programming from First Principles"...
|
|
I'm creating Haskell modules to host my attempts and solutions for the exercises
defined in each chapter of "Haskell Programming From First Principles".
|
|
Mimi and I will go to the grocery store every Monday here. If we track what we
buy, we can easily generate grocery lists that get better over time.
|
|
I'm writing a function that returns the total number of ways a cashier can make
change given the `amount` of change that the customer needs and an array of
`coins` from which to create the change.
My solution conceptually works but it actually does not return the results I am
expecting because I cannot create a Set of Map<A, B> in JavaScript. I'm also
somewhat sure that InterviewCake is expecting a less computationally expensive
answer.
|
|
While the "Dynamic programming and recursion" section hosts this problem, the
optimal solution does not use recursion. Many cite the Fibonacci problem as a
quintessential dynamic programming question. I assume these people expect an
answer like:
```python
def fib(n):
cache = {0: 0, 1: 1}
def do_fib(n):
if n in cache:
return cache[n]
else:
cache[n - 1] = do_fib(n - 1)
cache[n - 2] = do_fib(n - 2)
return cache[n - 1] + cache[n - 2]
return do_fib(n)
```
The cache turns the runtime of the classic Fibonacci solution...
```python
def fib(n):
if n in {0, 1}:
return n
return fib(n - 1) + fib(n - 2)
```
... from O(2^n) to a O(n). But both the cache itself and the additional stacks
that the runtime allocates for each recursive call create an O(n) space
complexity.
InterviewCake wants the answer to be solved in O(n) time with O(1)
space. To achieve this, instead of solving fib(n) from the top-down, we solve it
from the bottom-up.
I found this problem to be satisfying to solve.
|
|
Problem:
Prettier was not running when I saved Emacs buffers.
Why?
- prettier-js-mode needs needs node; lorri exposes node to direnv; direnv
exposes node to Emacs; lorri was not working as expected.
Solution:
Now that I'm using nix-buffer, I can properly expose node (and other
dependencies) to my Emacs buffers. Now Prettier is working.
Commentary:
Since prettier hadn't worked for so long, I stopped thinking about it. As such,
I did not include it as a dependency in boilerplate/typescript. I added it
now. I retroactively ran prettier across a few of my frontend projects to unify
the code styling.
I may need to run...
```shell
$ cd ~/briefcase
$ nix-shell
$ npx prettier --list-different "**/*.{js,ts,jsx,tsx,html,css,json}"
```
...to see which files I should have formatted.
|
|
Lorri does not cleanly integrate with my corporate device, which cannot run
NixOS. To expose dependencies to Emacs buffers, I will use nix-buffer.el, which
reads its values from dir-locals.nix. To easily expose dependencies from my
existing shell.nix files into dir-locals.nix, I wrote a Nix utility function.
|
|
Write a function that returns the set of all of the possible permutations of an
input string. This function should be solved recursively.
|
|
Write a function to find a duplicate item in a list of numbers. The values are
in the range [1, n]; the length of the list is n + 1. The solution should run in
linear time and consume constant space.
The solution is to construct a graph from the list. Each graph will have a cycle
where the last element in the cycle is a duplicate value.
See the solution for specific techniques on how to compute the length the cycle
without infinitely looping.
|
|
Write a function that returns the shortest path between nodes A and B in an
unweighted graph.
I know two algorithms for finding the shortest path in a *weighted* graph:
- Use a heap as a priority queue instead of the regular queue that you would use
when doing a BFT. This is called Dijkstra's algorithm. You can also use
Dijkstra's algorithm in an unweight graph by imaginging that all of the
weights on the edges are the same value (e.g. 1).
- Map the weighted graph into an unweighted graph by inserting N nodes between
each node, X and Y, where N is equal to the weight of the edge between X and
Y. After you map the weighted graph into an unweighted graph, perform a BFT
from A to B. A BFT will always find the shortest path between nodes A and B in
an unweighted graph.
I had forgotten that a BFT in an unweighted graph will always return the
shortest path between two nodes. I learned two things from InterviewCake.com's
solution:
1. I remembered that a BFT in an unweighted graph will return the shortest
path (if one exists).
2. I learned to use a dictionary to store the edge information and then
back-tracking to reconstruct the shortest path.
|
|
Write a function that colors the nodes of a graph such that no two neighbors
share a color.
|
|
Return a function that returns the second largest item in a binary search
tree (i.e. BST).
A BST is a tree where each node has no more than two children (i.e. one left
child and one right child). All of the values in a BST's left subtree must be
less than the value of the root node; all of the values in a BST's right subtree
must be greater than the value of the root node; both left and right subtrees
must also be BSTs themselves.
I solved this problem thrice -- improving the performance profile each time. The
final solution has a runtime complexity of O(n) and a spacetime complexity of
O(1).
|
|
Write a function that returns true if a given binary tree is a valid binary
search tree (i.e. if all of root's left nodes are less than root.value, all of
root's right nodes are greater than root.value, and both left and right subtrees
are also valid binary search trees).
|
