depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2014-02-07	Rename --no-readonly-mode --read-write-mode	Shea Levy	1	-2/+2
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-07	nix-instantiate: Add a --no-readonly-mode flag	Shea Levy	1	-0/+12
	This allows running nix-instantiate --eval-only without performing the evaluation in readonly mode, letting features like import from derivation and automatic substitution of builtins.storePath paths work. Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-01	Only run "git ls-files" when doing "make check"	Eelco Dolstra	1	-1/+1

2014-02-01	More "make dist" fixes	Eelco Dolstra	1	-1/+3

2014-02-01	Fix "make dist"	Eelco Dolstra	1	-0/+5

2014-02-01	Remove Automakefiles	Eelco Dolstra	2	-118/+0

2014-02-01	Update Makefile variable names	Eelco Dolstra	1	-4/+4

2014-02-01	Build/install manual	Eelco Dolstra	1	-0/+79

2014-01-13	Document nulls	Eelco Dolstra	1	-0/+3

2013-11-19	Add a toJSON primop	Eelco Dolstra	2	-0/+17

2013-11-14	Remove nix-setuid-helper	Eelco Dolstra	2	-76/+18
	AFAIK, nobody uses it, it's not maintained, and it has no tests.
2013-10-28	Update release notes, set version for 1.6.1 release	Eelco Dolstra	1	-1/+6

2013-10-24	Undocument obsolete form of "let"	Eelco Dolstra	1	-8/+2

2013-10-24	Doc fix	Eelco Dolstra	1	-2/+2

2013-10-24	Rename "attribute sets" to "sets"	Eelco Dolstra	3	-100/+99
	We don't have any other kind of sets so calling them attribute sets is unnecessarily verbose.
2013-10-24	Manual: Fix broken URLs	Eelco Dolstra	2	-3/+3
	Fixes #172.
2013-10-24	Document typeOf	Eelco Dolstra	1	-0/+13

2013-10-24	Document NIX_SHOW_STATS and NIX_COUNT_CALLS	Eelco Dolstra	1	-0/+18

2013-10-17	Fold two stack trace messages in derivations	Eelco Dolstra	1	-2/+3
	Combined with the previous changes, stack traces involving derivations are now much less verbose, since something like while evaluating the builtin function `getAttr': while evaluating the builtin function `derivationStrict': while instantiating the derivation named `gtk+-2.24.20' at `/home/eelco/Dev/nixpkgs/pkgs/development/libraries/gtk+/2.x.nix:11:3': while evaluating the derivation attribute `propagatedNativeBuildInputs' at `/home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/default.nix:78:17': while evaluating the attribute `outPath' at `/nix/store/212ngf4ph63mp6p1np2bapkfikpakfv7-nix-1.6/share/nix/corepkgs/derivation.nix:18:9': ... now reads while evaluating the attribute `propagatedNativeBuildInputs' of the derivation `gtk+-2.24.20' at `/home/eelco/Dev/nixpkgs/pkgs/development/libraries/gtk+/2.x.nix:11:3': ...
2013-10-17	Nix 1.6.1 release notes	Eelco Dolstra	1	-0/+60

2013-10-17	two typos	goblin	1	-2/+2

2013-09-10	Version was called 1.6, not 1.6.0	Eelco Dolstra	1	-1/+1

2013-09-10	Update release notes	Eelco Dolstra	1	-1/+37

2013-09-06	typo	Domen Kožar	1	-1/+1

2013-09-03	nix-env -i: Add a flag ‘--remove-all’ / ‘-r’	Eelco Dolstra	1	-0/+14
	This is equivalent to running ‘nix-env -e '*'’ first, except that it happens in a single transaction. Thus, ‘nix-env -i pkgs...’ replaces the profile with the specified set of packages. The main motivation is to support declarative package management (similar to environment.systemPackages in NixOS). That is, if you have a specification ‘profile.nix’ like this: with import <nixpkgs> {}; [ thunderbird geeqie ... ] then after any change to ‘profile.nix’, you can run: $ nix-env -f profile.nix -ir to update the profile to match the specification. (Without the ‘-r’ flag, if you remove a package from ‘profile.nix’, it won't be removed from the actual profile.) Suggested by @zefhemel.
2013-09-02	Manual: Make '' a bit clearer	Eelco Dolstra	1	-6/+6
	Issue #162.
2013-09-02	Fix manual error	Eelco Dolstra	1	-1/+1
	Reported by Matija Šuklje. Fixes #163.
2013-09-02	Update the release notes	Eelco Dolstra	1	-0/+52

2013-09-02	Add an option to limit the log output of builders	Eelco Dolstra	1	-0/+15
	This is mostly useful for Hydra to deal with builders that get stuck in an infinite loop writing data to stdout/stderr.
2013-08-26	Fix nix-shell command	Ivan Kozik	1	-1/+1

2013-08-26	Fix typos, especially those that end up in the Nix manual	Ivan Kozik	10	-24/+24

2013-08-23	Manual: Don't use actual hashes of Nix dependencies	Eelco Dolstra	1	-2/+2
	These cause an unnecessary runtime dependency :-)
2013-08-21	Fix corrupt PNG	Eelco Dolstra	1	-0/+0
	Libpng used to accept this, but no longer does.
2013-07-19	Add hacking notes plus a script for running nix-shell	Eelco Dolstra	2	-0/+42

2013-07-19	Rename ‘nix-build --run-env’ to ‘nix-shell’	Eelco Dolstra	5	-85/+191

2013-07-19	nix-build --run-env: Add a ‘--pure’ flag	Eelco Dolstra	1	-1/+28
	This causes the environment to be (almost) cleared, thus giving a shell that more closely resembled the actual Nix derivation.
2013-07-12	doc: typo	Domen Kožar	1	-1/+1

2013-07-11	nix-build --run-env: Source $stdenv/setup in the interactive shell	Eelco Dolstra	1	-8/+9
	This ensures that not just environment variables are set, but also shell functions such as unpackPhase, configurePhase and so on.
2013-07-03	Manual: auto-optimise-store is disabled by default	Eelco Dolstra	1	-5/+6

2013-07-01	Add support for uncompressed NARs in binary caches	Eelco Dolstra	1	-0/+7
	Issue NixOS/hydra#102.
2013-06-17	Update release notes for Nix 1.5.3	Eelco Dolstra	1	-0/+48

2013-06-13	Typo	Eelco Dolstra	1	-1/+1

2013-06-05	Update the default binary cache URL to cache.nixos.org	Eelco Dolstra	3	-8/+8

2013-05-29	.bashrc -> .profile	Eelco Dolstra	2	-2/+2

2013-05-13	Bump release date	Eelco Dolstra	1	-1/+1

2013-05-07	Update release date	Eelco Dolstra	1	-1/+1

2013-05-07	Add option ‘extra-binary-caches’	Eelco Dolstra	1	-2/+14
	This allows providing additional binary caches, useful in scripts like Hydra's build reproduction scripts, in particular because untrusted caches are ignored.
2013-05-03	Update release notes	Eelco Dolstra	1	-2/+3

2013-05-01	Nix 1.5.2 release notes	Eelco Dolstra	1	-0/+9

2013-04-09	Manual: Add a missing step to the build instructions	Eelco Dolstra	1	-3/+4
	Reported by Johan Grande.