depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2006-11-29	* Remove --enable-setuid, --with-nix-user and --with-nix-group.	Eelco Dolstra	1	-21/+1
	Rather, setuid support is now always compiled in (at least on platforms that have the setresuid system call, e.g., Linux and FreeBSD), but it must enabled by chowning/chmodding the Nix binaries.
2006-11-13	* Don't use the result of `uname -p' on x86_64 as it gives wacky	Eelco Dolstra	1	-0/+3
	results on some machines. (NIX-69)
2006-10-19	* Require Perl 5.8.0 or newer. I mean, it is more than four years	Eelco Dolstra	1	-1/+9
	old...
2006-10-06	* Bumped the version number to 0.11.	Eelco Dolstra	1	-1/+1

2006-09-22	* Build with -D_FILE_OFFSET_BITS=64 to support files >= 2^31 bytes	Eelco Dolstra	1	-0/+5
	(NIX-22).
2006-09-20	* Check for patch (NIX-59).	Eelco Dolstra	1	-0/+1

2006-09-04	* Store the Nix libraries in ${libdir}/nix instead of ${libdir}.	Eelco Dolstra	1	-0/+1

2006-08-25	* Map "ppc" to "powerpc" so that Linux on PowerPC will be reported as	Eelco Dolstra	1	-0/+3
	"powerpc-linux".
2006-08-21	* Convert to DocBook 5.	Eelco Dolstra	1	-4/+5
	* Use Jing for RelaxNG validation, xmllint seems buggy.
2006-05-31	* On Cygwin, set the system type to i686-cygwin, and disable dynamic	Eelco Dolstra	1	-2/+28
	linking.
2006-04-25	* Unless --with-bzip2 is specified, use a copy of bzip2 in the	Eelco Dolstra	1	-11/+15
	externals directory. This is in particular useful because though most systems have bzip2/bunzip2, they don't always have libbz2, which we need for bsdiff/bspatch.
2006-03-01	* Make it easy to run individual tests from the command line.	Eelco Dolstra	1	-3/+5

2006-02-22	* Check whether "nix-store -q --graph" generates a valid dot graph.	Eelco Dolstra	1	-0/+1
	* Test "nix-store -q --tree" as well.
2006-02-13	* Optional switch "--with-openssl=<PATH>" to use OpenSSL's	Eelco Dolstra	1	-0/+11
	implementations of MD5, SHA-1 and SHA-256. The main benefit is that we get assembler-optimised implementations of MD5 and SHA-1 (though not SHA-256 (at least on x86), unfortunately). OpenSSL's SHA-1 implementation on Intel is twice as fast as ours.
2006-02-01	* bsdiff updated to 4.3. This makes Nix depend on libbz2.	Eelco Dolstra	1	-3/+21

2005-10-05	* log2xml -> nix-log2xml.	Eelco Dolstra	1	-1/+1

2005-09-21	* Use -all_load on Mac OS X.	Eelco Dolstra	1	-0/+7

2005-09-16	* Bump the version number to 0.10.	Eelco Dolstra	1	-1/+1

2005-09-15	* Check for w3m.	Eelco Dolstra	1	-0/+1

2005-09-15	* This is not a GNU project :-P	Eelco Dolstra	1	-1/+1

2005-07-22	* Build dynamic libraries.	Eelco Dolstra	1	-1/+5

2005-05-07	* Build .tar.bz2 files in `make dist'.	Eelco Dolstra	1	-1/+1

2005-04-11	* Bump the version number to 0.9.	Eelco Dolstra	1	-1/+1

2005-04-08	* Doh.	Eelco Dolstra	1	-1/+0

2005-03-21	* Fink compatibility.	Eelco Dolstra	1	-3/+3

2005-03-15	* Remove Docbook EBNF dependency.	Eelco Dolstra	1	-5/+0

2005-03-15	* Purify all corepkgs builders.	Eelco Dolstra	1	-0/+7

2005-01-12	* Bump version number to 0.8.	Eelco Dolstra	1	-1/+1

2004-12-29	* Integrated bsdiff/bspatch 4.2 (from	Eelco Dolstra	1	-0/+1
	http://www.daemonology.net/bsdiff/bsdiff-4.2.tar.gz) into the source tree. The license is a bit peculiar, but it does allow verbatim copying, which is what we do here (i.e., so don't make any changes to the sources).
2004-12-20	* Place manifests in /nix/var/nix/manifests.	Eelco Dolstra	1	-1/+0
	* Use the new patch downloader.
2004-11-14	* Bump version number to 0.7.	Eelco Dolstra	1	-1/+1

2004-10-27	* Use `atdiff' instead of `cmp' for checking test output.	Eelco Dolstra	1	-0/+3
	* Don't use local file names in tests since they will produce different parse trees depending on the current directory.
2004-10-25	* Revert r1594 - it didn't solve the problem. Instead add	Eelco Dolstra	1	-2/+0
	svn-revision to distributions, which should fix it.
2004-10-25	* Make sure that the prerelease version is included in `--version'.	Eelco Dolstra	1	-0/+2

2004-09-09	* A very dirty hack to make setuid installations a bit nicer to use.	Eelco Dolstra	1	-4/+4
	Previously there was the problem that all files read by nix-env etc. should be reachable and readable by the Nix user. So for instance building a Nix expression in your home directory meant that the home directory should have at least g+x or o+x permission so that the Nix user could reach the Nix expression. Now we just switch back to the original user just prior to reading sources and the like. The places where this happens are somewhat arbitrary, however. Any scope that has a live SwitchToOriginalUser object in it is executed as the original user. * Back out r1385. setreuid() sets the saved uid to the new real/effective uid, which prevents us from switching back to the original uid. setresuid() doesn't have this problem (although the manpage has a bug: specifying -1 for the saved uid doesn't leave it unchanged; an explicit value must be specified).
2004-09-09	* Use setre[ug]id() instead of setres[ug]id(), since the former is	Eelco Dolstra	1	-4/+4
	more common than the latter (which exists only on Linux and FreeBSD). We don't really care about dropping the saved IDs since there apparently is no way to quiry them in any case, so it can't influence the build (unlike the effective IDs which are checked by Perl for instance).
2004-08-20	* On systems that have the setresuid() and setresgid() system calls to	Eelco Dolstra	1	-0/+6
	set the real uid and gid to the effective uid and gid, the Nix binaries can be installed as owned by the Nix user and group instead of root, so no root involvement of any kind is necessary. Linux and FreeBSD have these functions.
2004-08-20	* Setuid support for sharing a Nix installation between multiple	Eelco Dolstra	1	-0/+22
	users. If the configure flag `--enable-setuid' is used, the Nix programs nix-env, nix-store, etc. are installed with the setuid bit turned on so that they are executed as the user and group specified by `--with-nix-user=USER' and `--with-nix-group=GROUP', respectively (with defaults `nix' and `nix'). The setuid programs drop all special privileges if they are executed by a user who is not a member of the Nix group. The setuid feature is a quick hack to enable sharing of a Nix installation between users who trust each other. It is not generally secure, since any user in the Nix group can modify (by building an appropriate derivation) any object in the store, and for instance inject trojans into binaries used by other users. The setuid programs are owned by root, not the Nix user. This is because on Unix normal users cannot change the real uid, only the effective uid. Many programs don't work properly when the real uid differs from the effective uid. For instance, Perl will turn on taint mode. However, the setuid programs drop all root privileges immediately, changing all uids and gids to the Nix user and group.
2004-08-13	* WTF? More canonical system name problems ("athlon-linux" instead of	Eelco Dolstra	1	-4/+14
	"i686-linux").
2004-07-18	* Slightly better heuristic for picking the canonical system type.	Eelco Dolstra	1	-5/+7
	Now SuSE and Red Hat should yield the same type (`i686-linux'). Mac OS X should now give `powerpc-darwin' (i.e., the version number is gone).
2004-06-21	* Adapted nix-pull to use the new substitute mechanism.	Eelco Dolstra	1	-0/+1

2004-06-04	* A Nix mode for Emacs.	Eelco Dolstra	1	-0/+2

2004-05-18	* Don't set the rpath here --- it's not portable.	Eelco Dolstra	1	-2/+2

2004-05-18	* Go back to the old way of generating the system name, and allow it	Eelco Dolstra	1	-3/+6
	to be specified in configure (using `--with-system=SYSTEM').
2004-05-04	* Allow the location of the store etc. to be specified using	Eelco Dolstra	1	-0/+1
	environment variables. * Started adding some automatic tests. * Do a `make check' when building RPMs.
2004-04-26	* Bump the version number.	Eelco Dolstra	1	-1/+1

2004-04-26	* Only add `-preRELEASE' to the version if STABLE != 1.	Eelco Dolstra	1	-4/+10
	* Documented release procedures.
2004-04-23	* Pass SYSTEM through config.h, and allow spaces.	Eelco Dolstra	1	-1/+3

2004-04-21	* Channels. These allow you to stay current with an evolving set of	Eelco Dolstra	1	-0/+1
	Nix expressions. To subscribe to a channel (needs to be done only once): nix-channel --add \ http://catamaran.labs.cs.uu.nl/dist/nix/channels/nixpkgs-unstable This just adds the given URL to ~/.nix-channels (which can also be edited manually). To update from all channels: nix-channel --update This fetches the latest expressions and pulls cache manifests. The default Nix expression (~/.nix-defexpr) is made to point to the conjunction of the expressions downloaded from all channels. So to update all installed derivations in the current user environment: nix-channel --update nix-env --upgrade '*' If you are really courageous, you can put this in a cronjob or something. You can subscribe to multiple channels. It is not entirely clear what happens when there are name clashes between derivations from different channels. From nix-env/main.cc it appears that the one with the lowest (highest?) hash will be used, which is pretty meaningless.
2004-04-21	* Do initialise state (the DB etc.) when doing a `make install',	Eelco Dolstra	1	-0/+5
	unless `--disable-init-state' is passed to configure.