depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2005-01-12	* Bump version number to 0.8.	Eelco Dolstra	1	-1/+1

2004-12-29	* Integrated bsdiff/bspatch 4.2 (from	Eelco Dolstra	1	-0/+1
	http://www.daemonology.net/bsdiff/bsdiff-4.2.tar.gz) into the source tree. The license is a bit peculiar, but it does allow verbatim copying, which is what we do here (i.e., so don't make any changes to the sources).
2004-12-20	* Place manifests in /nix/var/nix/manifests.	Eelco Dolstra	1	-1/+0
	* Use the new patch downloader.
2004-11-14	* Bump version number to 0.7.	Eelco Dolstra	1	-1/+1

2004-10-27	* Use `atdiff' instead of `cmp' for checking test output.	Eelco Dolstra	1	-0/+3
	* Don't use local file names in tests since they will produce different parse trees depending on the current directory.
2004-10-25	* Revert r1594 - it didn't solve the problem. Instead add	Eelco Dolstra	1	-2/+0
	svn-revision to distributions, which should fix it.
2004-10-25	* Make sure that the prerelease version is included in `--version'.	Eelco Dolstra	1	-0/+2

2004-09-09	* A very dirty hack to make setuid installations a bit nicer to use.	Eelco Dolstra	1	-4/+4
	Previously there was the problem that all files read by nix-env etc. should be reachable and readable by the Nix user. So for instance building a Nix expression in your home directory meant that the home directory should have at least g+x or o+x permission so that the Nix user could reach the Nix expression. Now we just switch back to the original user just prior to reading sources and the like. The places where this happens are somewhat arbitrary, however. Any scope that has a live SwitchToOriginalUser object in it is executed as the original user. * Back out r1385. setreuid() sets the saved uid to the new real/effective uid, which prevents us from switching back to the original uid. setresuid() doesn't have this problem (although the manpage has a bug: specifying -1 for the saved uid doesn't leave it unchanged; an explicit value must be specified).
2004-09-09	* Use setre[ug]id() instead of setres[ug]id(), since the former is	Eelco Dolstra	1	-4/+4
	more common than the latter (which exists only on Linux and FreeBSD). We don't really care about dropping the saved IDs since there apparently is no way to quiry them in any case, so it can't influence the build (unlike the effective IDs which are checked by Perl for instance).
2004-08-20	* On systems that have the setresuid() and setresgid() system calls to	Eelco Dolstra	1	-0/+6
	set the real uid and gid to the effective uid and gid, the Nix binaries can be installed as owned by the Nix user and group instead of root, so no root involvement of any kind is necessary. Linux and FreeBSD have these functions.
2004-08-20	* Setuid support for sharing a Nix installation between multiple	Eelco Dolstra	1	-0/+22
	users. If the configure flag `--enable-setuid' is used, the Nix programs nix-env, nix-store, etc. are installed with the setuid bit turned on so that they are executed as the user and group specified by `--with-nix-user=USER' and `--with-nix-group=GROUP', respectively (with defaults `nix' and `nix'). The setuid programs drop all special privileges if they are executed by a user who is not a member of the Nix group. The setuid feature is a quick hack to enable sharing of a Nix installation between users who trust each other. It is not generally secure, since any user in the Nix group can modify (by building an appropriate derivation) any object in the store, and for instance inject trojans into binaries used by other users. The setuid programs are owned by root, not the Nix user. This is because on Unix normal users cannot change the real uid, only the effective uid. Many programs don't work properly when the real uid differs from the effective uid. For instance, Perl will turn on taint mode. However, the setuid programs drop all root privileges immediately, changing all uids and gids to the Nix user and group.
2004-08-13	* WTF? More canonical system name problems ("athlon-linux" instead of	Eelco Dolstra	1	-4/+14
	"i686-linux").
2004-07-18	* Slightly better heuristic for picking the canonical system type.	Eelco Dolstra	1	-5/+7
	Now SuSE and Red Hat should yield the same type (`i686-linux'). Mac OS X should now give `powerpc-darwin' (i.e., the version number is gone).
2004-06-21	* Adapted nix-pull to use the new substitute mechanism.	Eelco Dolstra	1	-0/+1

2004-06-04	* A Nix mode for Emacs.	Eelco Dolstra	1	-0/+2

2004-05-18	* Don't set the rpath here --- it's not portable.	Eelco Dolstra	1	-2/+2

2004-05-18	* Go back to the old way of generating the system name, and allow it	Eelco Dolstra	1	-3/+6
	to be specified in configure (using `--with-system=SYSTEM').
2004-05-04	* Allow the location of the store etc. to be specified using	Eelco Dolstra	1	-0/+1
	environment variables. * Started adding some automatic tests. * Do a `make check' when building RPMs.
2004-04-26	* Bump the version number.	Eelco Dolstra	1	-1/+1

2004-04-26	* Only add `-preRELEASE' to the version if STABLE != 1.	Eelco Dolstra	1	-4/+10
	* Documented release procedures.
2004-04-23	* Pass SYSTEM through config.h, and allow spaces.	Eelco Dolstra	1	-1/+3

2004-04-21	* Channels. These allow you to stay current with an evolving set of	Eelco Dolstra	1	-0/+1
	Nix expressions. To subscribe to a channel (needs to be done only once): nix-channel --add \ http://catamaran.labs.cs.uu.nl/dist/nix/channels/nixpkgs-unstable This just adds the given URL to ~/.nix-channels (which can also be edited manually). To update from all channels: nix-channel --update This fetches the latest expressions and pulls cache manifests. The default Nix expression (~/.nix-defexpr) is made to point to the conjunction of the expressions downloaded from all channels. So to update all installed derivations in the current user environment: nix-channel --update nix-env --upgrade '*' If you are really courageous, you can put this in a cronjob or something. You can subscribe to multiple channels. It is not entirely clear what happens when there are name clashes between derivations from different channels. From nix-env/main.cc it appears that the one with the lowest (highest?) hash will be used, which is pretty meaningless.
2004-04-21	* Do initialise state (the DB etc.) when doing a `make install',	Eelco Dolstra	1	-0/+5
	unless `--disable-init-state' is passed to configure.
2004-04-08	* EBNF grammar for the Nix expression language.	Eelco Dolstra	1	-0/+5

2004-04-06	* Fail if prerequisites are missing.	Eelco Dolstra	1	-11/+14

2004-04-06	* Switched from wget to curl.	Eelco Dolstra	1	-1/+4
	* Made the dependencies on bzip2 and the shell explicit.
2004-03-15	* Added a utility that can be used to produce nice HTML pages from Nix	Eelco Dolstra	1	-0/+1
	build logs. The program `log2xml' converts a Nix build log (read from standard input) into XML file that can then be converted to XHTML by the `log2html.xsl' stylesheet. The CSS stylesheet `logfile.css' is necessary to make it look good. This is primarily useful if the log file has a tree structure, i.e., that sub-tasks such as the various phases of a build (unpack, configure, make, etc.) or recursive invocations of Make are represented as such. While a log file is in principle an unstructured plain text file, builders can communicate this tree structure to `log2xml' by using escape sequences: - "\e[p" starts a new nesting level; the first line following the escape code is the header; - "\e[q" ends the current nesting level. The generic builder in nixpkgs (not yet committed) uses this. It shouldn't be to hard to patch GNU Make to speak this protocol. Further improvements to the generated HTML pages are to allow collapsing/expanding of subtrees, and to abbreviate store paths (but to show the full path by hovering the mouse over it).
2004-03-15	* Make perl a dependency of Nix.	Eelco Dolstra	1	-0/+5

2004-02-16	* Allow linking against an external Berkeley DB / ATerm library.	Eelco Dolstra	1	-0/+28

2004-02-16	* Allow the location of the store to be specified (--with-store-dir).	Eelco Dolstra	1	-0/+5
	* Do not create stuff in localstatedir when doing `make install' (since we may not have write access). In general, installation of constant code/data should be separate from the initialisation of mutable state.
2004-01-30	* Detect flex and bison; updated the manual.	Eelco Dolstra	1	-0/+2

2004-01-02	* RPM sucks.	Eelco Dolstra	1	-2/+2

2004-01-02	* Generate RPM spec file.	Eelco Dolstra	1	-2/+2

2003-12-22	* GCC 2.95 compatibility.	Eelco Dolstra	1	-0/+16

2003-12-01	* Use a system name that does not include the OS manufacturer (i.e.,	Eelco Dolstra	1	-0/+8
	"i686-linux" instead of "i686-suse-linux").
2003-11-26	* Typo fix.	Eelco Dolstra	1	-1/+1

2003-11-26	* Configure flags to specify the location of the DocBook DTD / stylesheets.	Eelco Dolstra	1	-0/+17

2003-11-25	* Use svn-revision to construct package version.	Eelco Dolstra	1	-5/+5

2003-11-22	* Don't use a hard-coded path.	Eelco Dolstra	1	-0/+1

2003-11-19	* nix-env: a tool to manage user environments.	Eelco Dolstra	1	-0/+1
	* Replace all directory reading code by a generic readDirectory() function.
2003-11-19	* Refactoring (step 2).	Eelco Dolstra	1	-0/+1

2003-11-19	* Refactoring: put the Nix expression evaluator in its own library so	Eelco Dolstra	1	-1/+1
	that it can be used by multiple programs.
2003-11-18	* Forgot this one.	Eelco Dolstra	1	-0/+1

2003-11-18	* nix -> nix-store, fix -> nix-instantiate.	Eelco Dolstra	1	-2/+2

2003-11-18	* libnix -> libstore.	Eelco Dolstra	1	-1/+1

2003-11-18	* Source tree refactoring.	Eelco Dolstra	1	-1/+1

2003-10-29	* Forked new version of Fix.	Eelco Dolstra	1	-0/+1

2003-10-20	* Finished refactoring the tree.	Eelco Dolstra	1	-5/+14

2003-10-16	* Substitutes and nix-pull now work again.	Eelco Dolstra	1	-1/+1
	* Fixed a segfault caused by the buffering of stderr. * Fix now allows the specification of the full output path. This should be used with great care, since it by-passes the normal hash generation. * Incremented the version number to 0.4 (prerelease).
2003-09-23	* Put the SVN revision number in the version string.	Eelco Dolstra	1	-1/+8