depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2017-05-03	nix eval: Add a --raw flag	Eelco Dolstra	1	-1/+13
	Similar to "jq -r", this prints the evaluation result (which must be a string value) unquoted.
2017-05-03	Fix perlBindings.x86_64-darwin	Eelco Dolstra	1	-1/+1
	http://hydra.nixos.org/build/52401151
2017-05-03	Merge pull request #1371 from regnat/doc_--xml_fix	Eelco Dolstra	1	-10/+8
	fix the description of --xml and --json
2017-05-03	doc: fix the description of --xml and --json	regnat	1	-10/+8
	Those options seem to only apply with --eval and not with --parse.
2017-05-02	build-remote: Add a basic test	Eelco Dolstra	3	-1/+27
	This only runs on Linux because it requires a diverted store (which uses mount/user namespaces).
2017-05-02	Fix "nix ... --all"	Eelco Dolstra	2	-12/+16
	When "--all" is used, we should not fill in a default installable.
2017-05-02	Add a test for diverted stores	Eelco Dolstra	2	-1/+29

2017-05-02	LocalStoreAccessor: Fix handling of diverted stores	Eelco Dolstra	1	-3/+4

2017-05-02	Replace $NIX_REMOTE_SYSTEMS with an option "builder-files"	Eelco Dolstra	4	-14/+34
	Also, to unify with hydra-queue-runner, allow it to be a list of files.
2017-05-02	build-remote: Fix fallback to other machines when connecting fails	Eelco Dolstra	5	-1/+19
	Opening an SSHStore or LegacySSHStore does not actually establish a connection, so the try/catch block here did nothing. Added a Store::connect() method to test whether a connection can be established.
2017-05-02	Add an option for specifying remote builders	Eelco Dolstra	6	-12/+27
	This is useful for one-off situations where you want to specify a builder on the command line instead of having to mess with nix.machines. E.g. $ nix-build -A hello --argstr system x86_64-darwin \ --option builders 'root@macstadium1 x86_64-darwin' will perform the specified build on "macstadium1". It also removes the need for a separate nix.machines file since you can specify builders in nix.conf directly. (In fact nix.machines is yet another hack that predates the general nix.conf configuration file, IIRC.) Note: this option is supported by the daemon for trusted users. The fact that this allows trusted users to specify paths to SSH keys to which they don't normally have access is maybe a bit too much trust...
2017-05-02	Factor out machines.conf parsing	Eelco Dolstra	3	-87/+108
	This allows hydra-queue-runner to use it.
2017-05-02	build-hook: If there are no machines defined, quit permanently	Eelco Dolstra	2	-2/+14

2017-05-02	Fix build hook test	Eelco Dolstra	1	-2/+2

2017-05-02	build-remote: Ugly hackery to get build logs to work	Eelco Dolstra	4	-3/+11
	The build hook mechanism expects build log output to go to file descriptor 4, so do that.
2017-05-01	build-remote: Don't require signatures	Eelco Dolstra	6	-16/+20
	This restores the old behaviour.
2017-05-01	Support arbitrary store URIs in nix.machines	Eelco Dolstra	4	-46/+66
	For backwards compatibility, if the URI is just a hostname, ssh:// (i.e. LegacySSHStore) is prepended automatically. Also, all fields except the URI are now optional. For example, this is a valid nix.machines file: local?root=/tmp/nix This is useful for testing the remote build machinery since you don't have to mess around with ssh.
2017-05-01	Minor cleanup	Eelco Dolstra	1	-2/+2

2017-05-01	Implement LegacySSHStore::buildDerivation()	Eelco Dolstra	1	-5/+32
	This makes LegacySSHStore usable by build-remote and hydra-queue-runner.
2017-05-01	Chomp log output from the build hook	Eelco Dolstra	1	-1/+1

2017-05-01	Remove $NIX_BUILD_HOOK and $NIX_CURRENT_LOAD	Eelco Dolstra	6	-156/+12
	This is to simplify remote build configuration. These environment variables predate nix.conf. The build hook now has a sensible default (namely build-remote). The current load is kept in the Nix state directory now.
2017-05-01	build-remote: Don't copy the .drv closure	Eelco Dolstra	2	-16/+8
	Since build-remote uses buildDerivation() now, we don't need to copy the .drv file anymore. This greatly reduces the set of input paths copied to the remote side (e.g. from 392 to 51 store paths for GNU hello on x86_64-darwin).
2017-05-01	Pass verbosity level to build hook	Eelco Dolstra	2	-6/+10

2017-05-01	Reduce severity of EMLINK warnings	Eelco Dolstra	1	-2/+1
	Fixes #1357.
2017-05-01	Add a dummy Store::buildPaths() method	Eelco Dolstra	5	-38/+36
	This default implementation of buildPaths() does nothing if all requested paths are already valid, and throws an "unsupported operation" error otherwise. This fixes a regression introduced by c30330df6f67c81986dfb124631bc756c8e58c0d in binary cache and legacy SSH stores.
2017-05-01	Merge pull request #1366 from Mic92/fix-nix-daemon-service	Eelco Dolstra	1	-0/+1
	nix-daemon.service: fix startup
2017-05-01	Merge branch 'remove-catchall' of https://github.com/layus/nix	Eelco Dolstra	3	-13/+29

2017-05-01	lexer: remove catch-all rules hiding real errors	Guillaume Maudoux	1	-10/+17
	With catch-all rules, we hide potential errors. It turns out that a4744254 made one cath-all useless. Flex detected that is was impossible to reach. The other is more subtle, as it can only trigger on unfinished escapes in unfinished strings, which only occurs at EOF.
2017-05-01	Fix lexer to support `$'` in multiline strings.	Guillaume Maudoux	3	-3/+12

2017-04-29	nix-daemon.service: set XDG_CONFIG_HOME	Jörg Thalheim	1	-0/+1
	Otherwise starting nix-daemon fails ● nix-daemon.service - Nix Daemon Loaded: loaded (/nix/store/mnf00a6gc55xl47smk0b32gmi7xpvlfp-nix-1.12pre5308_2f21d522/lib/systemd/system/nix-daemon.service; enabled; vendor preset: enabled) Drop-In: /nix/store/m2rgjp71n4kyp8j5fxgbrlv13scd5vvv-system-units/nix-daemon.service.d └─overrides.conf Active: failed (Result: exit-code) since Sat 2017-04-29 11:29:21 CEST; 9s ago Process: 7299 ExecStart=nix-daemon --daemon (code=exited, status=1/FAILURE) Main PID: 7299 (code=exited, status=1/FAILURE) CPU: 19ms ... systemd[1]: Started Nix Daemon. ... nix-daemon[7299]: error: $XDG_CONFIG_HOME and $HOME are not set ... systemd[1]: nix-daemon.service: Main process exited, code=exited, status=1/FAILURE ... systemd[1]: nix-daemon.service: Unit entered failed state. ... systemd[1]: nix-daemon.service: Failed with result 'exit-code'. ... systemd[1]: nix-daemon.service: Start request repeated too quickly. ... systemd[1]: Failed to start Nix Daemon. ... systemd[1]: nix-daemon.service: Failed with result 'exit-code'.
2017-04-28	Hopefully fix the Darwin build	Eelco Dolstra	1	-0/+1
	http://hydra.nixos.org/build/52080911
2017-04-28	Suppress warning about ssh-auth-sock	Eelco Dolstra	1	-1/+3

2017-04-28	Check for libreadline	Eelco Dolstra	7	-5/+22

2017-04-28	Fix brainfart	Eelco Dolstra	1	-1/+1

2017-04-28	Fix hash computation when importing NARs greater than 4 GiB	Eelco Dolstra	1	-1/+1
	This caused "nix-store --import" to compute an incorrect hash on NARs that don't fit in an unsigned int. The import would succeed, but "nix-store --verify-path" or subsequent exports would detect an incorrect hash. A deeper issue is that the export/import format does not contain a hash, so we can't detect such issues early. Also, I learned that -Wall does not warn about this.
2017-04-26	Merge pull request #1358 from shlevy/store-nesting	Eelco Dolstra	2	-0/+18
	Add Store nesting to fix import-from-derivation within filterSource
2017-04-26	Add Store nesting to fix import-from-derivation within filterSource	Shea Levy	2	-0/+18

2017-04-26	Doh	Eelco Dolstra	1	-1/+1

2017-04-26	Simplify building nix-perl in nix-shell	Eelco Dolstra	5	-6/+15

2017-04-25	nix repl: Fix Ctrl-C	Eelco Dolstra	1	-0/+10

2017-04-25	Minor cleanup	Eelco Dolstra	1	-10/+7

2017-04-25	Fix nix-shell test	Eelco Dolstra	1	-2/+4

2017-04-25	"using namespace std" considered harmful	Eelco Dolstra	1	-6/+5

2017-04-25	nix repl: Use $XDG_DATA_HOME for the readline history	Eelco Dolstra	3	-3/+19

2017-04-25	Make "nix repl" build	Eelco Dolstra	4	-33/+39

2017-04-25	Merge nix-repl repository	Eelco Dolstra	1	-0/+719

2017-04-25	Cleanup in preparation of merging nix-repl repo into nix repo	Eelco Dolstra	4	-798/+0

2017-04-25	Merge branch 'master' of https://github.com/olejorgenb/nix-repl	Eelco Dolstra	2	-1/+12

2017-04-25	Fix build	Eelco Dolstra	2	-5/+7

2017-04-25	StorePathCommands: Build installables	Eelco Dolstra	3	-20/+13
	So for instance "nix copy --to ... nixpkgs.hello" will build nixpkgs.hello first. It's debatable whether this is a good idea. It seems desirable for commands like "nix copy" but maybe not for commands like "nix path-info".