depot - monorepo for the virus lounge

Age	Commit message (Collapse)	Author	Files	Lines
2014-02-18	lexer-tab.o and parser-tab.o require each other's headers	Shea Levy	1	-0/+4

2014-02-18	Update ignores	Shea Levy	1	-0/+3

2014-02-18	Slight simplification	Eelco Dolstra	1	-17/+10

2014-02-18	Add a flag ‘--check’ to verify build determinism	Eelco Dolstra	9	-55/+97
	The flag ‘--check’ to ‘nix-store -r’ or ‘nix-build’ will cause Nix to redo the build of a derivation whose output paths are already valid. If the new output differs from the original output, an error is printed. This makes it easier to test if a build is deterministic. (Obviously this cannot catch all sources of non-determinism, but it catches the most common one, namely the current time.) For example: $ nix-build '<nixpkgs>' -A patchelf ... $ nix-build '<nixpkgs>' -A patchelf --check error: derivation `/nix/store/1ipvxsdnbhl1rw6siz6x92s7sc8nwkkb-patchelf-0.6' may not be deterministic: hash mismatch in output `/nix/store/4pc1dmw5xkwmc6q3gdc9i5nbjl4dkjpp-patchelf-0.6.drv' The --check build fails if not all outputs are valid. Thus the first call to nix-build is necessary to ensure that all outputs are valid. The current outputs are left untouched: the new outputs are either put in a chroot or diverted to a different location in the store using hash rewriting.
2014-02-17	Test nix-store --verify-path and --repair-path	Eelco Dolstra	1	-0/+18

2014-02-17	Don't build on Debian 6.0	Eelco Dolstra	1	-2/+2
	Its linker is too old to understand --no-copy-dt-needed-entries. http://hydra.nixos.org/build/9113883
2014-02-17	Make --repair work on Darwin	Eelco Dolstra	1	-3/+3
	Mac OS X doesn't allow renaming a read-only directory. http://hydra.nixos.org/build/9113895
2014-02-17	Refactoring	Eelco Dolstra	1	-29/+36

2014-02-17	When using a build hook, only copy missing paths	Eelco Dolstra	1	-9/+6

2014-02-17	Move some code around	Eelco Dolstra	1	-92/+82
	In particular, do replacing of valid paths during repair later. This prevents us from replacing a valid path after the build fails.
2014-02-17	nix-store --gc --max-freed: Support a unit specifier	Eelco Dolstra	3	-6/+25
	E.g. "--max-freed 10G" means "free ten gigabytes".
2014-02-17	Heuristically detect if a build may have failed due to a full disk	Eelco Dolstra	2	-5/+28
	This will allow Hydra to detect that a build should not be marked as "permanently failed", allowing it to be retried later.
2014-02-17	nix-shell: Execute shellHook if it exists	Eelco Dolstra	2	-0/+17
	Since normal builds don't execute shellHook, this allows nix-shell specific customisation. Suggested by Domen.
2014-02-17	Add a test for repairing paths	Eelco Dolstra	5	-8/+56

2014-02-14	download-via-ssh: Use readStorePath	Eelco Dolstra	2	-5/+13

2014-02-14	download-via-ssh: Show where we're downloading from	Eelco Dolstra	1	-1/+3

2014-02-14	Minor style fixes	Eelco Dolstra	4	-6/+14

2014-02-14	Merge remote-tracking branch 'shlevy/ssh-substituter'	Eelco Dolstra	8	-0/+271

2014-02-12	Indendation fix	Shea Levy	1	-21/+19
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-12	Remove relic of old code	Shea Levy	1	-2/+0
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-12	error messages start in lowercase	Shea Levy	2	-3/+3
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-12	Remove using declarations from download-via-ssh	Shea Levy	1	-20/+16
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-12	Document current meaning of preferLocalBuild	Eelco Dolstra	1	-5/+8
	Closes #208.
2014-02-10	Force use of Bash	Eelco Dolstra	1	-1/+1
	"echo -n" doesn't work with /bin/sh on Darwin.
2014-02-10	Binary tarball: Automatically create /nix	Eelco Dolstra	3	-37/+117
	The tarball can now be unpacked anywhere. The installation script uses "sudo" to create /nix if it doesn't exist. It also fetches the nixpkgs-unstable channel.
2014-02-10	nix-store --serve: Use a versioned protocol	Shea Levy	4	-34/+102
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-10	Move StoreApi::serve into opServe	Shea Levy	3	-39/+29
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-10	Pass in params by const ref	Shea Levy	2	-2/+2
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-10	Clarify comment	Shea Levy	1	-1/+2
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-10	Binary tarball: Automatically fetch the Nixpkgs channel	Eelco Dolstra	1	-1/+7

2014-02-10	nix-shell: Use shell.nix as the default expression if it exists	Eelco Dolstra	2	-7/+14

2014-02-08	Add download-via-ssh substituter	Shea Levy	6	-0/+168
	This substituter connects to a remote host, runs nix-store --serve there, and then forwards substituter commands on to the remote host and sends their results to the calling program. The ssh-substituter-hosts option can be specified as a list of hosts to try. This is an initial implementation and, while it works, it has some limitations: * Only the first host is used * There is no caching of query results (all queries are sent to the remote machine) * There is no informative output (such as progress bars) * Some failure modes may cause unhelpful error messages * There is no concept of trusted-ssh-substituter-hosts Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08	nix-store --serve: Flush out after every loop	Shea Levy	2	-2/+3
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08	nix-store --serve: Use dump instead of export	Shea Levy	3	-12/+7
	Also remove signing support Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08	nix-store --serve: Don't fail if asked for info about non-valid path	Shea Levy	1	-0/+2
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08	nix-store --serve: Don't loop forever	Shea Levy	1	-26/+25
	nix-store --export takes a tmproot, which can only release by exiting. Substituters don't currently work in a way that could take advantage of the looping, anyway. Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08	Add the nix-store --serve command	Shea Levy	3	-0/+55
	This is essentially the substituter API operating on the local store, which will be used by the ssh substituter. It runs in a loop rather than just taking one command so that in the future nix will be able to keep one connection open for multiple instances of the substituter. Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-07	nix-instantiate --eval-only --read-write-mode: Don't depend on ordering	Shea Levy	1	-9/+8
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-07	Rename --no-readonly-mode --read-write-mode	Shea Levy	2	-3/+3
	Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-07	nix-instantiate: Add a --no-readonly-mode flag	Shea Levy	2	-0/+15
	This allows running nix-instantiate --eval-only without performing the evaluation in readonly mode, letting features like import from derivation and automatic substitution of builtins.storePath paths work. Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-07	Fix the RPM build	Eelco Dolstra	1	-12/+4

2014-02-07	Install header files	Eelco Dolstra	2	-0/+3

2014-02-07	Merge commit 'a210c995cdd9279ed4137ec5d2e4cc928cb36097'	Eelco Dolstra	5	-26/+33

2014-02-07	Support DESTDIR	Eelco Dolstra	3	-22/+27

2014-02-06	Remove dead code	Eelco Dolstra	1	-3/+0

2014-02-06	Set a maintainer address	Eelco Dolstra	1	-0/+1
	Issue #202.
2014-02-06	Clean up a test warning	Eelco Dolstra	1	-1/+1

2014-02-06	Drop dependency on ‘expr’	Eelco Dolstra	1	-2/+2
	http://hydra.nixos.org/build/8715639 Not sure why this causes a failure now.
2014-02-06	Create the target directory of libraries and programs	Eelco Dolstra	4	-4/+9

2014-02-04	Fix version in nix.spec	Eelco Dolstra	1	-4/+4
	http://hydra.nixos.org/build/8715502