Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: If32c7fd03458a27aecb8c473f2c48b12f8cb5175
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6128
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
When printing strings as identifiers (in attribute sets), the string
should only be quoted and escaped if it contains escape characters.
Change-Id: If2bcfa1e93dc8f00be4d7a57ec1d82fc679103c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6127
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
This adds scaffolding code for running the Nix language test suite.
The majority of eval-okay-* tests should eventually be runnable as-is
by Tvix, however the eval-fail-* tests might not as we intend to have
more useful error messages than upstream Nix.
Change-Id: I4f3227f0889c55e4274b804a3072850fb78dd1bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6126
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This crate makes it easy to generate test cases from files on disk,
which is used for running the Nix test suite against Tvix.
Change-Id: I60ef26484d05e723982679dd42958adf52735916
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6125
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Nix strings displayed to users must be escaped the same way as they
are in C++ Nix. This adds the scaffolding for escapes, but is most
likely not yet complete.
Change-Id: Icfdcb2ac98d292c567ba894a92b6529a53e0cc17
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6124
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Instead of comparing the enum variants (which does not yield useful
behaviour), compare &str representations of the string instead.
Change-Id: I5e94b5f6c91b4561e1bc7c36d586f3d23c243764
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6112
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
|
|
For cases where the strings are statically known (such as the
oft-occuring name/value), this can be a useful optimisation.
It's also much more convenient in tests.
Change-Id: Ie462b684805bd4986ea5e85ca4bff663bc2d3c3c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6111
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
|
|
These do not yet test nested attribute sets; we need to add some more
inspection primitives first.
Change-Id: Icfc99bf17c73ebefc0d882a84f0ca73ec688a54d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6110
Reviewed-by: eta <tvl@eta.st>
Tested-by: BuildkiteCI
|
|
With this change, nested attribute sets can now be created from
literals.
This required some logic for dealing with cases where at a deeper
nesting point a literal attribute set was constructed from an
optimised representation.
For example, this is valid Nix code:
```nix
{
a = {}; # creates optimised empty representation
a.b = 1; # wants to add a `b = 1` to it
b = { name = "foo"; value = "bar"; }; # creates optimised K/V repr
b.foo = 42; # wants to add an additional `foo = 42`
}
```
In these cases, the attribute set must be coerced to a map
representation first which is achieved by the new internal
NixAttr::map_mut helper.
Change-Id: Ia61d3d9d14c4e0f5e207c00f6a2f4daa3265afb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6109
Reviewed-by: eta <tvl@eta.st>
Tested-by: BuildkiteCI
|
|
The internal optimisations of the set representation were previously
leaking into the VM, which is highly undesirable.
Keeping it encapsulated allows us to do additional optimisations
within value::attrs without being concerned about its use in the VM.
Change-Id: I7e7020bb0983b9d355d3db747b049b2faa60131f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6108
Reviewed-by: eta <tvl@eta.st>
Tested-by: BuildkiteCI
|
|
Change-Id: Ibf82bf6b9a10274fe6928db7a6a2beb74da92b13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6122
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I691e87c6b596fcc7028717a5a22d5619bd87a089
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6121
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
Change-Id: I41e26046a67635ec3dba2ac955e31e6ca7451cc6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6120
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
Change-Id: Id52ab2937e32385324ba93f4df7e1da17a1f4eec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
|
|
* //users/tazjin/predlozhnik: bump wasm-bindgen & run `cargo update`
* //users/Profpatsch/writers:
use proper keyword syntax to make make flake8 happy.
* //third_party/nixpkgs: pick binaryen from stable channel
Change-Id: Ia711d8c396aa09b78413d80f35eedf63fa315596
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6118
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: Profpatsch <mail@profpatsch.de>
|
|
Mirrors the rust exec-helpers
Change-Id: I96f211d6545e228b8ae0c1dce4e60e6f6867690c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6117
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
|
|
Mirrors the rust exec-helpers
Change-Id: I8fba49525949a8f38ca8c215e2ec7ba9d97d3bf9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6116
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
|
|
Change-Id: I1b797fb69f69e09f2dda99fce2f12adef0ac2ad2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6115
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
|
|
Haskell implementation of the netncode parser & generators.
Change-Id: I904df752e78641110af2857e71d8206bf432d427
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6114
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
|
|
Change-Id: Ie5f57300c380874a83d1cbd25a61eb595760bbf4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6113
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
|
|
There are multiple points where an insertion needs to be done into an
attribute set, but copying the key or checking for presence before
insertion should be avoided
As that is a little bit noisy, it's been factored out into a helper
function in this commit.
Change-Id: Ibcb054ebeb25a1236c06c812f47c8e74180d4fc9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6107
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This can construct non-overlapping nested attribute sets (i.e. `{ a.b
= 1; b.c = 2; }`, but not `{ a.b = 1; a.c = 2; }`).
In order to do the latter, it's necessary to gain the ability to
manipulate the in-progress attribute set construction. There's
multiple different options for this ...
Change-Id: If1a762a720b175e8eb4216cbf96a7434d22640fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6106
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
There are some notions of equality (due to e.g. different backing
variants for types, or Nix particularities) that don't work correctly
when deriving PartialEq.
Change-Id: Ide83ae67d051cc0b3ca89cefb283f17d0207acce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6105
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I57373ca76d0e25a5d08a8dfce9d5949099326fc0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6104
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This is required for constructing nested attribute sets at runtime.
There'll be quite a lot of optimisation potential with this solution
eventually, if it should turn out to be a bottleneck.
This introduces a conceptual change, in that the `Value` enum is now
an enum representing "all runtime values" instead of "all Nix language
types". This makes sense in general, as this type will also contain
Chunk representations etc. which are not exposed to users.
Change-Id: Ic5f72b2a0965b146c6a451efad34c6a81ca1aad8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6103
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
For name/value pairs (which occur extremely often in Nix and make up a
significant chunk of the runtime cost of evaluating nixpkgs) we
substitute an optimised representation.
For now this will only be used if the name/value pair keys were
specified as literal identifiers or strings (i.e. if chunks are
encountered as keys they are not forced and a normal attribute set
backed by a map will be constructed).
Change-Id: Ic79746c323e627528bd58b1a6024ee8d0aff7858
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6102
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Users may construct a pair that falls into the name/value optimisation
but where `name` is not actually a string, as from the language
perspective there is nothing special about this attribute set.
We also can not conditionally apply this by forcing the key at this
point, as this would change the language semantics.
Therefore, the name in the optimised representation is also carried as
`Value`.
Change-Id: I5be8a4c98ba19ebdfb7203a929f714a04492512e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6101
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I991d235cf52fbd42eb839b384f9c55ee64fa86c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6100
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: If979a2aa21444320427f54e6530a55cab873856b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6099
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This adds a new instruction which assembles an interpolated string
from a specified number of fragments, which are already going to be
located on the stack in the right position.
This will raise a type error if any of the fragments do not evaluate
to a string.
Change-Id: I5756248fa3e9fcc3d063c14db40b332f7e20a588
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6098
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This sets up the scaffolding for compiling interpolation, but those
instructions do not yet exist.
Change-Id: Ife41bbbf432d9661abe566c92437409dd0da44e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6097
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Ifbe05c2da9493c9e132a2d2e94a451d6091542a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6096
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I2c6fedc3dbb7d449d700f3972c3fbd4a7d147f6c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6095
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
Change-Id: Iec2b4910800ab29daae6d71b58a8acd14ccb1cc1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6094
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
There might be more logic in the future to encapsulate different
backing implementations of lists as well.
Change-Id: Ib7064fab48bf88b0c8913b0ecfa2108177c7c9fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6093
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
Change-Id: I303b57e035543f4597c6247983d1d533e4014638
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6092
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Implements attribute set literals without nesting. Technically this
already supports dynamic key fragments (evaluating to strings), though
the only way to create these (interpolation) is not yet implemented.
However, creating simple attribute sets like `{ }`, or `{ a = 15; }`
or `{ a = 10 * 2; }` works.
Recursive attribute sets are not yet implemented as we do not have any
kind of scope access yet anyways.
This is implemented using a new instruction that creates an attribute
set with a given number of elements by popping key/value pairs off the
stack.
Change-Id: I0f9aac7a131a112d3f66b131297686b38aaeddf2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6091
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
* tvl-slapd: move database to subdirectory (somehow now required)
Change-Id: I1792b856cf68b11959c0cc9caab4135e556f8c58
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6090
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Deriving Ord/Eq is required for the ordered BTreeMaps. Once interning
is implemented this will require some extra magic for the sort order,
but that's fine.
Change-Id: I0c654648eb3609a4a01d84868c25f43a4d35bc2e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6089
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I357c9adf939cb6001afa73ad02282d94ee22d0ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6088
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Idebf663ab7fde3955aae50f635320f7eb6c353e8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6087
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I6002bd5e5596b93325dea6c862370ba5235c0f08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6086
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I5e4465acc4a676c10d7374b14f7a09240202b466
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6085
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This adds a new function (intentionally bound to a rare key (Q)) in
the push menu which can push a *private* change to Gerrit.
A private change is one that, until submitted, is only visible to its
owner and all explicitly added people (reviewers, CC).
Change-Id: I6ee13dbbad099584475d3efac96e5d9b86efbc26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6061
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
For some reason a top-level Rust project ended up in this location,
which is incompatible with the actual project structure that's being
prepared for merge right now.
Change-Id: I9d919ad72fc7e4e4d8cbb9899e7f8d90fa7ca87a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6060
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
|
|
This representation should match what the Nix REPL shows for result
values.
Change-Id: If3143d969fcdc123a6029e2aeb7bbd6ae51aeb71
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6082
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This isn't relevant to the value type itself.
Change-Id: I678bc92a8a530b1081ed498bf3ff7925217bcc01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6081
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
These are a bit tricky to implement because Nix technically treats
them as identifiers, and only if the identifier is not explicitly
overridden within the scope does it yield the expected literal values.
Note that weirdness even occurs with scopedImport.
Change-Id: Ie55723405ccfcc25da37c5a08fa3332f37cf9ae5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6080
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Icb1d449fdee4d67b5f1eefdbc01baa1584ea0a67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6079
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: I9dd54aed72cd7e67593dc76f5a046ebbda40c26f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6078
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
|