Age | Commit message (Collapse) | Author | Files | Lines |
|
This puts together the puzzle pieces for threading dynamic
upvalues (that is, upvalues resolved from the `with`-stack) all the
way through.
Reading the test case enclosed in this commit and walking through it
is recommended to understand what problem is being tackled here.
In short, because the compiler can not statically know *which*
with-scope a dynamic argument is resolved from it needs to lay the
groundwork for resolving from *all* possible scopes.
There are multiple different approaches to doing this. The approach
chosen in this commit is that if a dynamic upvalue is detected, the
compiler will emit instructions to close over this dynamic value
in *all* enclosing lambda contexts.
It uses a new instruction for this that will leave around a sentinel
value in case an identifier could not be resolved, and wire the
location of this found value (or sentinel) up through the upvalues to
the next level of nesting.
In this tradeoff, tvix potentially closes over more upvalues than are
needed (but in practice, how often do people create *really* deep
`with`-stacks? and in *this* kind of code situation? maybe we should
even warn for this!) but avoids keeping the entire attribute sets
themselves around.
Looking at the test case, each surrounding closure will close
over *all* dynamic identifiers that are referenced later on visible to
it, but only the last one for each identifier will actually end up
being used.
This also covers our bases for an additional edge-case this creates,
in which an identifier potentially resolves to a dynamic upvalue *and*
to a dynamic value within the function's own scope (again, would
anyone really do this?) by introducing a resolution instruction for
that particular case.
There is likely some potential for cleaning up this code which is
quite ugly in some parts, but as this implementation is now carefully
calibrated to work I decided it is time to commit it and clean it up
in subsequent commits.
Change-Id: Ib701e3e6da39bd2c95938d1384036ff4f9fb3749
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6322
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
With this change, encountering a dynamic upvalue will thread through
all contexts starting from the lowest context that has a non-empty
`with`-stack.
The additional upvalues are not actually used yet, so the effective
behaviour remains mostly the same. This is done in preparation for an
upcoming change, which will implement proper dynamic resolution for
complex cases of nested dynamic upvalues.
Yes, this whole upvalue + dynamic values thing is a little bit
mind-bending, but we would like to not give up being able to resolve a
large chunk of the scoping behaviour statically.
Change-Id: Ia58cdd47d79212390a6503ef13cef46b6b3e19a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6321
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This is a common idiom in both Nix and other languages when a local is
declared without actually being used.
Since Tvix warns for unused locals, having this available is useful
and can be included in the final error message as a suggestion if an
unused variable is intentional.
Change-Id: Ia85f704ba183499a3bae657c58166e2e29f9bde5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6320
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This does not yet correctly resolve them if they are more than one
scope up, however.
Change-Id: I6687073c60aee0282f2b6ffc98b34c1e96a60f20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6319
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I4b98eaea3ed5059c29938a117a9d59499a0bb95d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6318
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
With this change, it becomes possible for functions to call themselves
as they are being defined in local bindings.
Change-Id: Ib46a39ba17b1452b5673d96fa729d633d237241a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6314
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I9bc41e57e1cfdf536d7b9048bac2e7aff1ee2ffa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6313
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This is required to efficiently construct the upvalue array at
runtime, as there are situations where during Closure construction
multiple things already have a reference to the closure (e.g. a
self-reference).
Change-Id: I35263b845fdc695dc873de489f5168d39b370f6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6312
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
It looks like this was intended, but typoed.
Change-Id: I830d6f0488b75b859bcf4175531c35d79cd40985
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6335
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Most expressions people enter will probably have a fairly small
result. It's useful to see *that* it did the correct thing before
looking at *how* it did that.
Change-Id: I50d7d4c07e41f11b71a16c00c49b9553ae9e90a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6334
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Change-Id: Iaedfc281db82de1e8eb2400db1118c8431d2579f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6333
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
`builtins.getFlake` doesn't interest us, of course, but some others may
be worth (or easy) to implement. They are pretty low priority, though,
since nixpkgs has compatiblity wrappers for the ones it uses.
The new debugging-related builtins (break and traceVerbose) are
interesting to note, but may not make sense to implement at all.
Change-Id: Icae547aa3bd9d6ee6b87897ba8210eb9b9b044c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6332
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This avoids unnecessary rebuilds of //tvix/eval when working on it
locally using impure cargo.
Change-Id: I028033a6345a9655e2877a534448706b8f85a1a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6317
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Uses Tvix's new `TracingObserver` to optionally produce a runtime
trace, which the user can toggle via a checkbox.
Runtime traces can be quite long, so they're only produced if asked
for.
Change-Id: Id0f27dc8ef6e9d81a31ecf22c81757b066815320
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6331
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
A little bit easier to grasp what's going on then just a blank page
with a textbox ...
Change-Id: I16f456035173813d60d88ff7e5ebd14712f77ec3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6330
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
The `With` struct no longer contained any internals after the cleanup
logic for the stack had been moved into Compiler::compile_with,
leaving the `Vec<With>` to essentially act as a counter for the number
of things on the with stack.
That's inefficient of course, so with this commit it actually becomes
an integer (with an encapsulated API within scope::Scope).
Change-Id: I67a00987fc8b46b30d369a96d41e83c8af5b1998
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6311
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The compiler module is getting quite long and this will help keep some
order.
Right now the scope internals are not very well encapsulated; this
paves a way to reducing the API surface of the `scope` type to the
things that are actually used by the compiler instead of giving access
to its internals.
Change-Id: I8c16c26d263f018baa263f395c9cd80715199241
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6310
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This has no effect yet, other than changing the way in which some
upvalue captures break (that are already not working correctly).
However, after this change the compiler correctly detects
self-recursion and can start emitting the instructions to deal with
this at runtime.
Change-Id: Id3b0ac206c0204739597a4325bcc66f9c806c242
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6309
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Calculating the with_idx (i.e. the stack offset of the "phantom"
variable from which a `with` dynamically reads at runtime) needs to
account for unitialised variables the same way as the resolution of
normal locals does.
Change-Id: I9ffe404535bf1c3cb5dfe8d9e005798c857fff94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6308
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This is required to correctly clean up the `with` values.
At the moment, the attrset from which identifiers are being taken is
always pushed on the stack. This means that it must also be removed
again, otherwise in an expression like
with { a = 15; }; a
The final stack is `[ { a = 15; } 15 ]` *after the last operation*,
which means that the attrset is still on there as garbage.
This has little practical impact right now because it is always
shadowed by the fact that the actual expression value is at the right
location, but becomes relevant when accounting for upvalue captures.
Change-Id: I69e9745bfaa4d6bbcb60ee71f4dc3f8d8695d16a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6303
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This extends the logic of `Scope::resolve_local` to detect cases where
self-recursion is occuring (i.e. an identifier is being accessed in
its own identifier).
These cases are not yet handled specially, and the logic of when
things are marked initialised (which was previously always at the same
spot as their declaration) has not changed, making this commit a
runtime no-op for now.
Change-Id: I3179642a7c55869ad4465fdd2678b0cd51a20f15
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6302
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Nix does not allow things like `let a = 1; a = 2; in a`, but doing it
across depths is allowed.
Change-Id: I6a259f8b01a254b433b58c736e245c9c764641b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6301
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This does not yet change anything semantically, but will be useful for
resolving simple cases of self-recursion etc.
Change-Id: I139ecb7e4a8a81193774392a96e73e0ea6b9f85d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6300
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
These need to be handled specially by the runtime if the compiler
determines that a given local must be resolved via `with`.
Note that this implementation has a bug: It currently allows `with`
inside of nested lambdas to shadow statically known identifiers. This
will be cleaned up in the next commit.
Change-Id: If196b99cbd1a0f2dbb4a40a0e88cdb09a009c6b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6299
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
The previous implementation of OpResolveWith manually controlled the
loop iteration, which skipped over the disassembler's tracing
instruction.
Instead, the resolution of dynamic variables has been delegated to a
new helper function. This has the additional benefit that the loop
labels are no longer required, making things a bit cleaner.
Change-Id: If22b74c3d49c74bf3a1ec4497cb761a9ee6cf2a4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6298
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Instead of tying the popping of the with stack to scope depth, clean
up the stack immediately after processing a with body.
The previous behaviour was actually incorrect, as it would leave
things on the with-stack longer than they were supposed to be there.
This could lead to false positive resolutions in some situations
involving closures.
Change-Id: I7b0638557503f1f71eb602e3d5ff193cdfcb67cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6297
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: Ib8287ade4d5df6d29e1812fb2d349cee5d92ca6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6296
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Instead of the previous hack which painfully threaded through
a structure that the disassembler could write to, Tvix's evaluator is
gaining a new "Observer" API which lets library clients observe
compilation output (and, soon!, runtime tracing).
This adapts tvixbolt to use this observer interface (with the default
`DisassemblingObserver`) to populate the `bytecode` field of its
output.
This is purely a mechanical change, no functionality is impacted.
Change-Id: I22bd2218629f30fd7351d4cc5ddcf639c12fea14
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6316
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
This is the code backing the small site currently deployed at
https://tazj.in/blobs/nixbolt/index.html
This relies on a newer version of Tvix than is available in depot and
a bunch of other stuff that isn't public yet, so for now no build file
is provided as this is heavily work-in-progress.
Change-Id: I7a8e4dbf4e11d1c70175f929e65f40ff69acbbd9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6315
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
|
|
Implements the final bit of logic remaining for wiring up closures,
which is the runtime construction of closure objects.
When encountering an OpClosure, the VM walks through the bytecode
collecting all the upvalue location operands (see commit introducing
the OpCode::Data* variants for details) and stores the runtime values
in the new closures upvalue vector.
After that, the handling of the closure itself becomes functionally
identical to that of lambdas.
With this initial implementation of closures there are several large
optimisation potentials available, the two most notable ones are:
- Distinguish the runtime representation of lambdas and closures
explicitly.
- Detect and handle multiple-arity functions directly in the compiler.
However, for both of these we should wait until we have appropriate
benchmarking infrastructure in place. This is because our test
implementations have shown that the complexity of either of these
changes is quite significant, and we do not yet know if they really
pay off.
Change-Id: I077e977810fd5cb2b1ecd7f1a119e728025dd786
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6295
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This resolves an upvalue at runtime by pushing it on the stack from
the closure's upvalue vector.
Change-Id: Ic3e7a7ecd9f7032f679114a1995e5bbf83062fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6294
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
In preparation for implementing calling of closures, store a closure
directly in the VMs call frame.
Change-Id: Iad24cd8c49fee4ebd4d0c84ffaa4c2505ee3dfd6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6293
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
... same as the others
Change-Id: I9c8868388c10b0b6484c5bdd3799d801296c6979
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6292
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Fully implements the instructions for compiling closure
objects (without runtime handling yet).
Closure (and thunk) objects are created at runtime by capturing all
known upvalues. To represent this, the instructions for creating them
need to have a variable number of arguments. Due to that, this commit
introduces new variants in OpCode that are not actually operations,
but data.
If the VM is implemented correctly, the instruction pointer should
never point at these. Due to this, the VM will panic if it sees a data
operand during an execution run.
Change-Id: Ic56b49b3a42736dc437751e76df0e89c8d0619c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6291
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Better for development flow.
Change-Id: I038efb39caca804f28a44fd4c83457e90abbcee4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6290
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
This adds a new upvalue tracking structure in the compiler to resolve
upvalues and track their positions within a function when compiling a
closure.
The compiler will emit runtime upvalue access instructions after this
commit, but the creation of the runtime closure object etc. is not yet
wired up.
Change-Id: Ib0c2c25f686bfd45f797c528753068858e3a770d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6289
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
|
|
Change-Id: Ibde0b2baa1128a74c1364ee9a6330b62db3da699
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6288
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I9b9de1f681972c205d4d20bc5731d2ce79858edb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6287
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I11b9324233c0aa48bd2fbac15a484962f925e72e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6283
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
This adds a transparent wrapper around `usize` used for jump offsets
in the opcodes. This is a step towards getting rid of ambiguous plain
`usize` usage in the opcode.
Change-Id: I21e35e67d94b32d68251908b96c7f62b6f56a8bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6282
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
grfn pointed out in cl/6174 that `Result` might cause developers to
believe that this behaves like std::Result, which it does not.
Change-Id: Ia30ab0dcb7e8da7bf842777ee3fe17bcf35cb0c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6281
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Change-Id: I95a2ad61d9512b91017c801f325d0193b4da9c7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6280
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Refactors the update function to take the attribute sets by value
instead.
To facilitate this, we use an equivalent of the currently unstable
`Rc::clone_or_unwrap` in the VM when encountering attribute sets, so
that in cases where the only references to the attrs being updated are
the ones on the stack those clones are avoided completely.
This does make update() a little bit more tricky internally, as some
optimised branches can directly return the moved value, and others
need to destructure with ownership. For this reason there are now two
different match statements handling the different ownership cases.
Change-Id: Ia77d3ba5c86afb75b9f1f51758bda61729ba5aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6279
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
|
|
Add a quick couple of benchmarks for merging attribute sets, large and
small.
Change-Id: I26940a9cf4e0d30e3d9eb07a7b8c366ca4072ca3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6286
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: grfn <grfn@gws.fyi>
|
|
Suggestion from grfn in cl/6158.
Change-Id: I16dcf2296a5ec5d299d5a080ca099b8eda6c254e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6278
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
grfn suggested clearer naming for these in cl/6166.
Change-Id: I83164bf1d1902ebd42272e9d5d63819a0f6a72c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6277
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: Ifdd7b99223d239d955ac7eeeae95db97eb742bf0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6276
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
This is no longer needed for anything and the extra clone here is not
really more costly than constructing a blackhole value in a different
place.
Change-Id: I5c63085b1b4418b629ea58a42e3bfe9a9b586d76
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6275
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I4893a37719b9bf08b35963d48e6851a194a08aa7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6274
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|
|
Change-Id: I9cd61ac79ed11b4c6580f31c5af5ebbfd45054b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6273
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
|