8 files changed, 215 insertions, 0 deletions
diff --git a/users/riking/dotfiles/fish/conf.d/nix-env.fish b/users/riking/dotfiles/fish/conf.d/nix-env.fish
new file mode 100644
index 000000000000..6f79f9752855
--- /dev/null
+++ b/users/riking/dotfiles/fish/conf.d/nix-env.fish
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: Unlicense
+# https://raw.githubusercontent.com/lilyball/nix-env.fish/master/conf.d/nix-env.fish
+
+# Setup Nix
+
+# We need to distinguish between single-user and multi-user installs.
+# This is difficult because there's no official way to do this.
+# We could look for the presence of /nix/var/nix/daemon-socket/socket but this will fail if the
+# daemon hasn't started yet. /nix/var/nix/daemon-socket will exist if the daemon has ever run, but
+# I don't think there's any protection against accidentally running `nix-daemon` as a user.
+# We also can't just look for /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh because
+# older single-user installs used the default profile instead of a per-user profile.
+# We can still check for it first, because all multi-user installs should have it, and so if it's
+# not present that's a pretty big indicator that this is a single-user install. If it does exist,
+# we still need to verify the install type. To that end we'll look for a root owner and sticky bit
+# on /nix/store. Multi-user installs set both, single-user installs don't. It's certainly possible
+# someone could do a single-user install as root and then manually set the sticky bit but that
+# would be extremely unusual.
+
+set -l nix_profile_path /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
+set -l single_user_profile_path ~/.nix-profile/etc/profile.d/nix.sh
+if test -e $nix_profile_path
+  # The path exists. Double-check that this is a multi-user install.
+  # We can't just check for ~/.nix-profile/… because this may be a single-user install running as
+  # the wrong user.
+
+  # stat is not portable. Splitting the output of ls -nd is reliable on most platforms.
+  set -l owner (string split -n ' ' (ls -nd /nix/store 2>/dev/null))[3]
+  if not test -k /nix/store -a $owner -eq 0
+    # /nix/store is either not owned by root or not sticky. Assume single-user.
+    set nix_profile_path $single_user_profile_path
+  end
+else
+  # The path doesn't exist. Assume single-user
+  set nix_profile_path $single_user_profile_path
+end
+
+if test -e $nix_profile_path
+  # Source the nix setup script
+  # We're going to run the regular Nix profile under bash and then print out a few variables
+  for line in (env -u BASH_ENV bash -c '. "$0"; for name in PATH "${!NIX_@}"; do printf "%s=%s\0" "$name" "${!name}"; done' $nix_profile_path | string split0)
+    set -xg (string split -m 1 = $line)
+  end
+
+  # Insert Nix's fish share directories into fish's special variables.
+  # nixpkgs-installed fish tries to set these up already if NIX_PROFILES is defined, which won't
+  # be the case when sourcing $__fish_data_dir/share/config.fish normally, but might be for a
+  # recursive invocation. To guard against that, we'll only insert paths that don't already exit.
+  # Furthermore, for the vendor_conf.d sourcing, we'll use the pre-existing presence of a path in
+  # $fish_function_path to determine whether we want to source the relevant vendor_conf.d folder.
+
+  # To start, let's locally define NIX_PROFILES if it doesn't already exist.
+  set -al NIX_PROFILES
+  if test (count $NIX_PROFILES) -eq 0
+    set -a NIX_PROFILES $HOME/.nix-profile
+  end
+  # Replicate the logic from nixpkgs version of $__fish_data_dir/__fish_build_paths.fish.
+  set -l __nix_profile_paths (string split ' ' -- $NIX_PROFILES)[-1..1]
+  set -l __extra_completionsdir \
+    $__nix_profile_paths/etc/fish/completions \
+    $__nix_profile_paths/share/fish/vendor_completions.d
+  set -l __extra_functionsdir \
+    $__nix_profile_paths/etc/fish/functions \
+    $__nix_profile_paths/share/fish/vendor_functions.d
+  set -l __extra_confdir \
+    $__nix_profile_paths/etc/fish/conf.d \
+    $__nix_profile_paths/share/fish/vendor_conf.d \
+
+  ### Configure fish_function_path ###
+  # Remove any of our extra paths that may already exist.
+  # Record the equivalent __extra_confdir path for any function path that exists.
+  set -l existing_conf_paths
+  for path in $__extra_functionsdir
+    if set -l idx (contains --index -- $path $fish_function_path)
+      set -e fish_function_path[$idx]
+      set -a existing_conf_paths $__extra_confdir[(contains --index -- $path $__extra_functionsdir)]
+    end
+  end
+  # Insert the paths before $__fish_data_dir.
+  if set -l idx (contains --index -- $__fish_data_dir/functions $fish_function_path)
+    # Fish has no way to simply insert into the middle of an array.
+    set -l new_path $fish_function_path[1..$idx]
+    set -e new_path[$idx]
+    set -a new_path $__extra_functionsdir
+    set fish_function_path $new_path $fish_function_path[$idx..-1]
+  else
+    set -a fish_function_path $__extra_functionsdir
+  end
+
+  ### Configure fish_complete_path ###
+  # Remove any of our extra paths that may already exist.
+  for path in $__extra_completionsdir
+    if set -l idx (contains --index -- $path $fish_complete_path)
+      set -e fish_complete_path[$idx]
+    end
+  end
+  # Insert the paths before $__fish_data_dir.
+  if set -l idx (contains --index -- $__fish_data_dir/completions $fish_complete_path)
+    set -l new_path $fish_complete_path[1..$idx]
+    set -e new_path[$idx]
+    set -a new_path $__extra_completionsdir
+    set fish_complete_path $new_path $fish_complete_path[$idx..-1]
+  else
+    set -a fish_complete_path $__extra_completionsdir
+  end
+
+  ### Source conf directories ###
+  # The built-in directories were already sourced during shell initialization.
+  # Any __extra_confdir that came from $__fish_data_dir/__fish_build_paths.fish was also sourced.
+  # As explained above, we're using the presence of pre-existing paths in $fish_function_path as a
+  # signal that the corresponding conf dir has also already been sourced.
+  # In order to simulate this, we'll run through the same algorithm as found in
+  # $__fish_data_dir/config.fish except we'll avoid sourcing the file if it comes from an
+  # already-sourced location.
+  # Caveats:
+  # * Files will be sourced in a different order than we'd ideally do (because we're coming in
+  #   after the fact to source them).
+  # * If there are existing extra conf paths, files in them may have been sourced that should have
+  #   been suppressed by paths we're inserting in front.
+  # * Similarly any files in $__fish_data_dir/vendor_conf.d that should have been suppressed won't
+  #   have been.
+  set -l sourcelist
+  for file in $__fish_config_dir/conf.d/*.fish $__fish_sysconf_dir/conf.d/*.fish
+    # We know these paths were sourced already. Just record them.
+    set -l basename (string replace -r '^.*/' '' -- $file)
+    contains -- $basename $sourcelist
+    or set -a sourcelist $basename
+  end
+  for root in $__extra_confdir
+    for file in $root/*.fish
+      set -l basename (string replace -r '^.*/' '' -- $file)
+      contains -- $basename $sourcelist
+      and continue
+      set -a sourcelist $basename
+      contains -- $root $existing_conf_paths
+      and continue # this is a pre-existing path, it will have been sourced already
+      [ -f $file -a -r $file ]
+      and source $file
+    end
+  end
+end
diff --git a/users/riking/dotfiles/fish/config.fish b/users/riking/dotfiles/fish/config.fish
new file mode 100644
index 000000000000..c2454762bddf
--- /dev/null
+++ b/users/riking/dotfiles/fish/config.fish
@@ -0,0 +1,8 @@
+set -gx GOPATH "$HOME/go"
+set -gx GPG_TTY (tty)
+set -gx DEPOT_ROOT "$GOPATH/src/code.tvl.fyi"
+
+set -gx PATH '/usr/local/go/bin' "$HOME/.cargo/bin" "$HOME/.rbenv/bin" $PATH
+status --is-interactive; and rbenv init - | source
+source ~/.opsrc.fish # work
+set -gx PATH "$HOME/go/bin" $PATH
diff --git a/users/riking/dotfiles/fish/fish_variables b/users/riking/dotfiles/fish/fish_variables
new file mode 100644
index 000000000000..fa8bff919f40
--- /dev/null
+++ b/users/riking/dotfiles/fish/fish_variables
@@ -0,0 +1,32 @@
+# This file contains fish universal variable definitions.
+# VERSION: 3.0
+SETUVAR __fish_initialized:3100
+SETUVAR fish_color_autosuggestion:555\x1ebrblack
+SETUVAR fish_color_cancel:\x2dr
+SETUVAR fish_color_command:005fd7
+SETUVAR fish_color_comment:990000
+SETUVAR fish_color_cwd:green
+SETUVAR fish_color_cwd_root:red
+SETUVAR fish_color_end:009900
+SETUVAR fish_color_error:ff0000
+SETUVAR fish_color_escape:00a6b2
+SETUVAR fish_color_history_current:\x2d\x2dbold
+SETUVAR fish_color_host:normal
+SETUVAR fish_color_host_remote:yellow
+SETUVAR fish_color_match:\x2d\x2dbackground\x3dbrblue
+SETUVAR fish_color_normal:normal
+SETUVAR fish_color_operator:00a6b2
+SETUVAR fish_color_param:00afff
+SETUVAR fish_color_quote:999900
+SETUVAR fish_color_redirection:00afff
+SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_color_status:red
+SETUVAR fish_color_user:brgreen
+SETUVAR fish_color_valid_path:\x2d\x2dunderline
+SETUVAR fish_greeting:Welcome\x20to\x20fish\x2c\x20the\x20friendly\x20interactive\x20shell\x0aType\x20\x60help\x60\x20for\x20instructions\x20on\x20how\x20to\x20use\x20fish
+SETUVAR fish_key_bindings:fish_default_key_bindings
+SETUVAR fish_pager_color_completion:\x1d
+SETUVAR fish_pager_color_description:B3A06D\x1eyellow
+SETUVAR fish_pager_color_prefix:white\x1e\x2d\x2dbold\x1e\x2d\x2dunderline
+SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan
diff --git a/users/riking/dotfiles/fish/functions/ddate.fish b/users/riking/dotfiles/fish/functions/ddate.fish
new file mode 100644
index 000000000000..8152d31680e7
--- /dev/null
+++ b/users/riking/dotfiles/fish/functions/ddate.fish
@@ -0,0 +1,3 @@
+function ddate --description 'current date in Discourse format'
+    TZ=UTC date '+[date=%Y-%m-%d time=%H:%M:%S timezone=\"%Z\"]'
+end
diff --git a/users/riking/dotfiles/fish/functions/gh-clone.fish b/users/riking/dotfiles/fish/functions/gh-clone.fish
new file mode 100644
index 000000000000..109ec353f6db
--- /dev/null
+++ b/users/riking/dotfiles/fish/functions/gh-clone.fish
@@ -0,0 +1,18 @@
+function gh-clone --description 'Clone and CD to a github repository'
+    if test (count $argv) -eq 1
+        set user (string split "/" -- $argv[1])[1]
+        set repo (string split "/" -- $argv[1])[2]
+    else
+        set user $argv[1]
+        set repo $argv[2]
+    end
+
+    if test -d "$HOME/go/src/github.com/$user/$repo"
+        cd "$HOME/go/src/github.com/$user/$repo"
+        return 0
+    end
+    mkdir -p "$HOME/go/src/github.com/$user"
+    cd "$HOME/go/src/github.com/$user"
+    git clone "git@github.com:$user/$repo.git"
+    cd "$HOME/go/src/github.com/$user/$repo"
+end
diff --git a/users/riking/dotfiles/fish/functions/prodaccess.fish b/users/riking/dotfiles/fish/functions/prodaccess.fish
new file mode 100644
index 000000000000..876c14c5e31e
--- /dev/null
+++ b/users/riking/dotfiles/fish/functions/prodaccess.fish
@@ -0,0 +1,6 @@
+function prodaccess
+    ssh-add "$HOME/.ssh/id_ecdsa_sk"
+    begin; ssh-add -L | grep -q 'ZgEu6S3SLatYN'; end || ssh-add "$HOME"/.ssh/id_ed25519
+    begin; ssh-add -L | grep -q 'Gfh2S3kUwZ8A6'; end || ssh-add "$HOME"/.ssh/id_rsa.discourse
+    echo "signing test" | gpg --clearsign > /dev/null
+end
diff --git a/users/riking/dotfiles/fish/functions/reset-audio.fish b/users/riking/dotfiles/fish/functions/reset-audio.fish
new file mode 100644
index 000000000000..eb48578a52bc
--- /dev/null
+++ b/users/riking/dotfiles/fish/functions/reset-audio.fish
@@ -0,0 +1,4 @@
+function reset-audio --description "Resets pulse and alsa"
+    pulseaudio -k
+    sudo alsa force-reload
+end
diff --git a/users/riking/dotfiles/fish/functions/tvl-push.fish b/users/riking/dotfiles/fish/functions/tvl-push.fish
new file mode 100644
index 000000000000..f04ac830c005
--- /dev/null
+++ b/users/riking/dotfiles/fish/functions/tvl-push.fish
@@ -0,0 +1,3 @@
+function tvl-push
+    git push origin HEAD:refs/for/canon
+end