diff options
Diffstat (limited to 'tvix/nix-compat/src/wire')
| -rw-r--r-- | tvix/nix-compat/src/wire/bytes_reader.rs | 465 | ||||
| -rw-r--r-- | tvix/nix-compat/src/wire/bytes_writer.rs | 4 | ||||
| -rw-r--r-- | tvix/nix-compat/src/wire/mod.rs | 4 |
3 files changed, 472 insertions, 1 deletions
diff --git a/tvix/nix-compat/src/wire/bytes_reader.rs b/tvix/nix-compat/src/wire/bytes_reader.rs new file mode 100644 index 000000000000..b1dcebcc6092 --- /dev/null +++ b/tvix/nix-compat/src/wire/bytes_reader.rs @@ -0,0 +1,465 @@ +use pin_project_lite::pin_project; +use std::{ + ops::RangeBounds, + task::{ready, Poll}, +}; +use tokio::io::AsyncRead; + +use crate::wire::bytes::padding_len; + +use super::bytes_writer::{BytesPacketPosition, LEN_SIZE}; + +pin_project! { + /// Reads a "bytes wire packet" from the underlying reader. + /// The format is the same as in [crate::wire::bytes::read_bytes], + /// however this structure provides a [AsyncRead] interface, + /// allowing to not having to pass around the entire payload in memory. + /// + /// After being constructed with the underlying reader and an allowed size, + /// subsequent requests to poll_read will return payload data until the end + /// of the packet is reached. + /// + /// Internally, it will first read over the size packet, filling payload_size, + /// ensuring it fits allowed_size, then return payload data. + /// It will only signal EOF (returning `Ok(())` without filling the buffer anymore) + /// when all padding has been successfully consumed too. + /// + /// This also means, it's important for a user to always read to the end, + /// and not just call read_exact - otherwise it might not skip over the + /// padding, and return garbage when reading the next packet. + /// + /// In case of an error due to size constraints, or in case of not reading + /// all the way to the end (and getting a EOF), the underlying reader is no + /// longer usable and might return garbage. + pub struct BytesReader<R, S> + where + R: AsyncRead, + S: RangeBounds<u64>, + + { + #[pin] + inner: R, + + allowed_size: S, + payload_size: [u8; 8], + state: BytesPacketPosition, + } +} + +impl<R, S> BytesReader<R, S> +where + R: AsyncRead + Unpin, + S: RangeBounds<u64>, +{ + /// Constructs a new BytesReader, using the underlying passed reader. + pub fn new(r: R, allowed_size: S) -> Self { + Self { + inner: r, + allowed_size, + payload_size: [0; 8], + state: BytesPacketPosition::Size(0), + } + } +} +/// Returns an error if the passed usize is 0. +fn ensure_nonzero_bytes_read(bytes_read: usize) -> Result<usize, std::io::Error> { + if bytes_read == 0 { + Err(std::io::Error::new( + std::io::ErrorKind::UnexpectedEof, + "underlying reader returned EOF", + )) + } else { + Ok(bytes_read) + } +} + +impl<R, S> AsyncRead for BytesReader<R, S> +where + R: AsyncRead, + S: RangeBounds<u64>, +{ + fn poll_read( + self: std::pin::Pin<&mut Self>, + cx: &mut std::task::Context<'_>, + buf: &mut tokio::io::ReadBuf<'_>, + ) -> Poll<std::io::Result<()>> { + let mut this = self.project(); + + // Use a loop, so we can deal with (multiple) state transitions. + loop { + match *this.state { + BytesPacketPosition::Size(LEN_SIZE) => { + // used in case an invalid size was signalled. + Err(std::io::Error::new( + std::io::ErrorKind::InvalidData, + "signalled package size not in allowed range", + ))? + } + BytesPacketPosition::Size(pos) => { + // try to read more of the size field. + // We wrap a BufRead around this.payload_size here, and set_filled. + let mut read_buf = tokio::io::ReadBuf::new(this.payload_size); + read_buf.advance(pos); + ready!(this.inner.as_mut().poll_read(cx, &mut read_buf))?; + + ensure_nonzero_bytes_read(read_buf.filled().len() - pos)?; + + let total_size_read = read_buf.filled().len(); + if total_size_read == LEN_SIZE { + // If the entire payload size was read, parse it + let payload_size = u64::from_le_bytes(*this.payload_size); + + if !this.allowed_size.contains(&payload_size) { + // If it's not in the allowed + // range, transition to failure mode + // `BytesPacketPosition::Size(LEN_SIZE)`, where only + // an error is returned. + *this.state = BytesPacketPosition::Size(LEN_SIZE) + } else if payload_size == 0 { + // If the payload size is 0, move on to reading padding directly. + *this.state = BytesPacketPosition::Padding(0) + } else { + // Else, transition to reading the payload. + *this.state = BytesPacketPosition::Payload(0) + } + } else { + // If we still need to read more of payload size, update + // our position in the state. + *this.state = BytesPacketPosition::Size(total_size_read) + } + } + BytesPacketPosition::Payload(pos) => { + let signalled_size = u64::from_le_bytes(*this.payload_size); + // We don't enter this match arm at all if we're expecting empty payload + debug_assert!(signalled_size > 0, "signalled size must be larger than 0"); + + // Read from the underlying reader into buf + // We cap the ReadBuf to the size of the payload, as we + // don't want to leak padding to the caller. + let bytes_read = ensure_nonzero_bytes_read({ + // Reducing these two u64 to usize on 32bits is fine - we + // only care about not reading too much, not too less. + let mut limited_buf = buf.take((signalled_size - pos) as usize); + ready!(this.inner.as_mut().poll_read(cx, &mut limited_buf))?; + limited_buf.filled().len() + })?; + + // SAFETY: we just did populate this, but through limited_buf. + unsafe { buf.assume_init(bytes_read) } + buf.advance(bytes_read); + + if pos + bytes_read as u64 == signalled_size { + // If we now read all payload, transition to padding + // state. + *this.state = BytesPacketPosition::Padding(0); + } else { + // if we didn't read everything yet, update our position + // in the state. + *this.state = BytesPacketPosition::Payload(pos + bytes_read as u64); + } + + // We return from poll_read here. + // This is important, as any error (or even Pending) from + // the underlying reader on the next read (be it padding or + // payload) would require us to roll back buf, as generally + // a AsyncRead::poll_read may not advance the buffer in case + // of a nonsuccessful read. + // It can't be misinterpreted as EOF, as we definitely *did* + // write something into buf if we come to here (we pass + // `ensure_nonzero_bytes_read`). + return Ok(()).into(); + } + BytesPacketPosition::Padding(pos) => { + // Consume whatever padding is left, ensuring it's all null + // bytes. Only return `Ready(Ok(()))` once we're past the + // padding (or in cases where polling the inner reader + // returns `Poll::Pending`). + let signalled_size = u64::from_le_bytes(*this.payload_size); + let total_padding_len = padding_len(signalled_size) as usize; + + let padding_len_remaining = total_padding_len - pos; + if padding_len_remaining != 0 { + // create a buffer only accepting the number of remaining padding bytes. + let mut buf = [0; 8]; + let mut padding_buf = tokio::io::ReadBuf::new(&mut buf); + let mut padding_buf = padding_buf.take(padding_len_remaining); + + // read into padding_buf. + ready!(this.inner.as_mut().poll_read(cx, &mut padding_buf))?; + let bytes_read = ensure_nonzero_bytes_read(padding_buf.filled().len())?; + + *this.state = BytesPacketPosition::Padding(pos + bytes_read); + + // ensure the bytes are not null bytes + if !padding_buf.filled().iter().all(|e| *e == b'\0') { + return Err(std::io::Error::new( + std::io::ErrorKind::InvalidData, + "padding is not all zeroes", + )) + .into(); + } + + // if we still have padding to read, run the loop again. + continue; + } + // return EOF + return Ok(()).into(); + } + } + } + } +} + +#[cfg(test)] +mod tests { + use std::time::Duration; + + use crate::wire::bytes::write_bytes; + use hex_literal::hex; + use lazy_static::lazy_static; + use rstest::rstest; + use tokio::io::AsyncReadExt; + use tokio_test::{assert_err, io::Builder}; + + use super::*; + + /// The maximum length of bytes packets we're willing to accept in the test + /// cases. + const MAX_LEN: u64 = 1024; + + lazy_static! { + pub static ref LARGE_PAYLOAD: Vec<u8> = (0..255).collect::<Vec<u8>>().repeat(4 * 1024); + } + + /// Helper function, calling the (simpler) write_bytes with the payload. + /// We use this to create data we want to read from the wire. + async fn produce_packet_bytes(payload: &[u8]) -> Vec<u8> { + let mut exp = vec![]; + write_bytes(&mut exp, payload).await.unwrap(); + exp + } + + /// Read bytes packets of various length, and ensure read_to_end returns the + /// expected payload. + #[rstest] + #[case::empty(&[])] // empty bytes packet + #[case::size_1b(&[0xff])] // 1 bytes payload + #[case::size_8b(&hex!("0001020304050607"))] // 8 bytes payload (no padding) + #[case::size_9b( &hex!("000102030405060708"))] // 9 bytes payload (7 bytes padding) + #[case::size_1m(LARGE_PAYLOAD.as_slice())] // larger bytes packet + #[tokio::test] + async fn read_payload_correct(#[case] payload: &[u8]) { + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await) + .build(); + + let mut r = BytesReader::new(&mut mock, ..=LARGE_PAYLOAD.len() as u64); + let mut buf = Vec::new(); + r.read_to_end(&mut buf).await.expect("must succeed"); + + assert_eq!(payload, &buf[..]); + } + + /// Fail if the bytes packet is larger than allowed + #[tokio::test] + async fn read_bigger_than_allowed_fail() { + let payload = LARGE_PAYLOAD.as_slice(); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[0..8]) // We stop reading after the size packet + .build(); + + let mut r = BytesReader::new(&mut mock, ..2048); + let mut buf = Vec::new(); + assert_err!(r.read_to_end(&mut buf).await); + } + + /// Fail if the bytes packet is smaller than allowed + #[tokio::test] + async fn read_smaller_than_allowed_fail() { + let payload = &[0x00, 0x01, 0x02]; + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[0..8]) // We stop reading after the size packet + .build(); + + let mut r = BytesReader::new(&mut mock, 1024..2048); + let mut buf = Vec::new(); + assert_err!(r.read_to_end(&mut buf).await); + } + + /// Fail if the padding is not all zeroes + #[tokio::test] + async fn read_fail_if_nonzero_padding() { + let payload = &[0x00, 0x01, 0x02]; + let mut packet_bytes = produce_packet_bytes(payload).await; + // Flip some bits in the padding + packet_bytes[12] = 0xff; + let mut mock = Builder::new().read(&packet_bytes).build(); // We stop reading after the faulty bit + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = Vec::new(); + + r.read_to_end(&mut buf).await.expect_err("must fail"); + } + + /// Start a 9 bytes payload packet, but have the underlying reader return + /// EOF in the middle of the size packet (after 4 bytes). + /// We should get an unexpected EOF error, already when trying to read the + /// first byte (of payload) + #[tokio::test] + async fn read_9b_eof_during_size() { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..4]) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = [0u8; 1]; + + assert_eq!( + r.read_exact(&mut buf).await.expect_err("must fail").kind(), + std::io::ErrorKind::UnexpectedEof + ); + + assert_eq!(&[0], &buf, "buffer should stay empty"); + } + + /// Start a 9 bytes payload packet, but have the underlying reader return + /// EOF in the middle of the payload (4 bytes into the payload). + /// We should get an unexpected EOF error, after reading the first 4 bytes + /// (successfully). + #[tokio::test] + async fn read_9b_eof_during_payload() { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..8 + 4]) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = [0; 9]; + + r.read_exact(&mut buf[..4]).await.expect("must succeed"); + + assert_eq!( + r.read_exact(&mut buf[4..=4]) + .await + .expect_err("must fail") + .kind(), + std::io::ErrorKind::UnexpectedEof + ); + } + + /// Start a 9 bytes payload packet, but return an error at various stages *after* the actual payload. + /// read_exact with a 9 bytes buffer is expected to succeed, but any further + /// read, as well as read_to_end are expected to fail. + #[rstest] + #[case::before_padding(8 + 9)] + #[case::during_padding(8 + 9 + 2)] + #[case::after_padding(8 + 9 + padding_len(9) as usize)] + #[tokio::test] + async fn read_9b_eof_after_payload(#[case] offset: usize) { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..offset]) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = [0; 9]; + + // read_exact of the payload will succeed, but a subsequent read will + // return UnexpectedEof error. + r.read_exact(&mut buf).await.expect("should succeed"); + assert_eq!( + r.read_exact(&mut buf[4..=4]) + .await + .expect_err("must fail") + .kind(), + std::io::ErrorKind::UnexpectedEof + ); + + // read_to_end will fail. + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..8 + payload.len()]) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = Vec::new(); + assert_eq!( + r.read_to_end(&mut buf).await.expect_err("must fail").kind(), + std::io::ErrorKind::UnexpectedEof + ); + } + + /// Start a 9 bytes payload packet, but return an error after a certain position. + /// Ensure that error is propagated. + #[rstest] + #[case::during_size(4)] + #[case::before_payload(8)] + #[case::during_payload(8 + 4)] + #[case::before_padding(8 + 4)] + #[case::during_padding(8 + 9 + 2)] + #[tokio::test] + async fn propagate_error_from_reader(#[case] offset: usize) { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..offset]) + .read_error(std::io::Error::new(std::io::ErrorKind::Other, "foo")) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = Vec::new(); + + let err = r.read_to_end(&mut buf).await.expect_err("must fail"); + assert_eq!( + err.kind(), + std::io::ErrorKind::Other, + "error kind must match" + ); + + assert_eq!( + err.into_inner().unwrap().to_string(), + "foo", + "error payload must contain foo" + ); + } + + /// If there's an error right after the padding, we don't propagate it, as + /// we're done reading. We just return EOF. + #[tokio::test] + async fn no_error_after_eof() { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await) + .read_error(std::io::Error::new(std::io::ErrorKind::Other, "foo")) + .build(); + + let mut r = BytesReader::new(&mut mock, ..MAX_LEN); + let mut buf = Vec::new(); + + r.read_to_end(&mut buf).await.expect("must succeed"); + assert_eq!(buf.as_slice(), payload); + } + + /// Introduce various stalls in various places of the packet, to ensure we + /// handle these cases properly, too. + #[rstest] + #[case::beginning(0)] + #[case::before_payload(8)] + #[case::during_payload(8 + 4)] + #[case::before_padding(8 + 4)] + #[case::during_padding(8 + 9 + 2)] + #[tokio::test] + async fn read_payload_correct_pending(#[case] offset: usize) { + let payload = &hex!("FF0102030405060708"); + let mut mock = Builder::new() + .read(&produce_packet_bytes(payload).await[..offset]) + .wait(Duration::from_nanos(0)) + .read(&produce_packet_bytes(payload).await[offset..]) + .build(); + + let mut r = BytesReader::new(&mut mock, ..=LARGE_PAYLOAD.len() as u64); + let mut buf = Vec::new(); + r.read_to_end(&mut buf).await.expect("must succeed"); + + assert_eq!(payload, &buf[..]); + } +} diff --git a/tvix/nix-compat/src/wire/bytes_writer.rs b/tvix/nix-compat/src/wire/bytes_writer.rs index 933b0e6efa6c..8bd0a2d00ef6 100644 --- a/tvix/nix-compat/src/wire/bytes_writer.rs +++ b/tvix/nix-compat/src/wire/bytes_writer.rs @@ -6,7 +6,7 @@ use tokio::io::AsyncWrite; use super::bytes::EMPTY_BYTES; /// The length of the size field, in bytes is always 8. -const LEN_SIZE: usize = 8; +pub(crate) const LEN_SIZE: usize = 8; pin_project! { /// Writes a "bytes wire packet" to the underlying writer. @@ -52,6 +52,8 @@ pin_project! { /// move to the beginning of the next one: /// - Size(LEN_SIZE) must be expressed as Payload(0) /// - Payload(self.payload_len) must be expressed as Padding(0) +/// There's one exception - Size(LEN_SIZE) in the reader represents a failure +/// state we enter in case the allowed size doesn't match the allowed range. /// /// Padding(padding_len) means we're at the end of the bytes wire packet. #[derive(Clone, Debug, PartialEq, Eq)] diff --git a/tvix/nix-compat/src/wire/mod.rs b/tvix/nix-compat/src/wire/mod.rs index cb14e4d420b7..56ea364dffb7 100644 --- a/tvix/nix-compat/src/wire/mod.rs +++ b/tvix/nix-compat/src/wire/mod.rs @@ -5,8 +5,12 @@ pub mod bytes; #[cfg(feature = "async")] +mod bytes_reader; +#[cfg(feature = "async")] mod bytes_writer; #[cfg(feature = "async")] +pub use bytes_reader::BytesReader; +#[cfg(feature = "async")] pub use bytes_writer::BytesWriter; #[cfg(feature = "async")] |