diff options
Diffstat (limited to 'third_party/nix/scripts')
| -rwxr-xr-x | third_party/nix/scripts/build.sh | 24 | ||||
| -rwxr-xr-x | third_party/nix/scripts/daemon.sh | 24 | ||||
| -rwxr-xr-x | third_party/nix/scripts/eval.sh | 23 | ||||
| -rw-r--r-- | third_party/nix/scripts/install-darwin-multi-user.sh | 144 | ||||
| -rw-r--r-- | third_party/nix/scripts/install-multi-user.sh | 798 | ||||
| -rw-r--r-- | third_party/nix/scripts/install-nix-from-closure.sh | 180 | ||||
| -rwxr-xr-x | third_party/nix/scripts/install-systemd-multi-user.sh | 188 | ||||
| -rw-r--r-- | third_party/nix/scripts/install.in | 66 | ||||
| -rwxr-xr-x | third_party/nix/scripts/nix-http-export.cgi.in | 51 | ||||
| -rw-r--r-- | third_party/nix/scripts/nix-profile-daemon.sh.in | 29 | ||||
| -rw-r--r-- | third_party/nix/scripts/nix-profile.sh.in | 39 | ||||
| -rwxr-xr-x | third_party/nix/scripts/nix-reduce-build.in | 171 | ||||
| -rwxr-xr-x | third_party/nix/scripts/repl.sh | 23 | ||||
| -rwxr-xr-x | third_party/nix/scripts/setup_store.sh | 11 |
14 files changed, 0 insertions, 1771 deletions
diff --git a/third_party/nix/scripts/build.sh b/third_party/nix/scripts/build.sh deleted file mode 100755 index 759c9e9f2c12..000000000000 --- a/third_party/nix/scripts/build.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/usr/bin/env bash - -# Run `nix build` using a local store, for use during development. Intended to -# be run from the cmake build directory - -set -eo pipefail - -if [ $1 = "--debug" ]; then - run=(gdb --args) - shift 1 -elif [ "$1" = "--rr" ]; then - run=(rr record) - shift 1 -else - run=() -fi - -make -j 10 -NIX_STORE_DIR=$(pwd)/nix/store \ - NIX_LOG_DIR=$(pwd)/nix/var/log/nix \ - NIX_STATE_DIR=$(pwd)/nix/var/nix \ - XDG_CACHE_HOME=$(pwd)/cache \ - NIX_REMOTE=daemon \ - ${run[*]} ./src/nix build "$@" diff --git a/third_party/nix/scripts/daemon.sh b/third_party/nix/scripts/daemon.sh deleted file mode 100755 index 3daa0f139097..000000000000 --- a/third_party/nix/scripts/daemon.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/usr/bin/env bash -set -eo pipefail - -# Run a nix daemon using a local store, for use during development. Intended to -# be run from the cmake build directory - -if [ $1 = "--debug" ]; then - run=(gdb --args) - shift 1 -elif [ "$1" = "--rr" ]; then - run=(rr record) - shift 1 -else - run=() -fi - -make -j 10 -NIX_STORE_DIR=$(pwd)/nix/store \ - NIX_LOG_DIR=$(pwd)/nix/var/log/nix \ - NIX_STATE_DIR=$(pwd)/nix/var/nix \ - XDG_CACHE_HOME=$(pwd)/cache \ - NIX_LIBEXEC_DIR=$(pwd) \ - GRPC_TRACE=all \ - ${gdb[*]} ./src/nix-daemon/nix-daemon diff --git a/third_party/nix/scripts/eval.sh b/third_party/nix/scripts/eval.sh deleted file mode 100755 index f71d9f7931fe..000000000000 --- a/third_party/nix/scripts/eval.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/usr/bin/env bash -set -eo pipefail - -# Run `nix eval` using a local store, for use during development. Intended to -# be run from the cmake build directory - -if [ "$#" -gt 0 ] && [ "$1" = "--debug" ]; then - gdb=(gdb --args) - shift 1 -elif [ "$1" = "--rr" ]; then - gdb=(rr record) - shift 1 -else - gdb=() -fi - -make -j 10 -NIX_STORE_DIR=$(pwd)/nix/store \ - NIX_LOG_DIR=$(pwd)/nix/var/log/nix \ - NIX_STATE_DIR=$(pwd)/nix/var/nix \ - XDG_CACHE_HOME=$(pwd)/cache \ - NIX_REMOTE=daemon \ - ${gdb[*]} ./src/nix eval "$@" diff --git a/third_party/nix/scripts/install-darwin-multi-user.sh b/third_party/nix/scripts/install-darwin-multi-user.sh deleted file mode 100644 index 49076bd5c03f..000000000000 --- a/third_party/nix/scripts/install-darwin-multi-user.sh +++ /dev/null @@ -1,144 +0,0 @@ -#!/usr/bin/env bash - -set -eu -set -o pipefail - -readonly PLIST_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist - -dsclattr() { - /usr/bin/dscl . -read "$1" \ - | awk "/$2/ { print \$2 }" -} - -poly_validate_assumptions() { - if [ "$(uname -s)" != "Darwin" ]; then - failure "This script is for use with macOS!" - fi -} - -poly_service_installed_check() { - [ -e "$PLIST_DEST" ] -} - -poly_service_uninstall_directions() { - cat <<EOF -$1. Delete $PLIST_DEST - - sudo launchctl unload $PLIST_DEST - sudo rm $PLIST_DEST - -EOF -} - -poly_service_setup_note() { - cat <<EOF - - load and start a LaunchDaemon (at $PLIST_DEST) for nix-daemon - -EOF -} - -poly_configure_nix_daemon_service() { - _sudo "to set up the nix-daemon as a LaunchDaemon" \ - cp -f "/nix/var/nix/profiles/default$PLIST_DEST" "$PLIST_DEST" - - _sudo "to load the LaunchDaemon plist for nix-daemon" \ - launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist - - _sudo "to start the nix-daemon" \ - launchctl start org.nixos.nix-daemon - -} - -poly_group_exists() { - /usr/bin/dscl . -read "/Groups/$1" > /dev/null 2>&1 -} - -poly_group_id_get() { - dsclattr "/Groups/$1" "PrimaryGroupID" -} - -poly_create_build_group() { - _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \ - /usr/sbin/dseditgroup -o create \ - -r "Nix build group for nix-daemon" \ - -i "$NIX_BUILD_GROUP_ID" \ - "$NIX_BUILD_GROUP_NAME" >&2 -} - -poly_user_exists() { - /usr/bin/dscl . -read "/Users/$1" > /dev/null 2>&1 -} - -poly_user_id_get() { - dsclattr "/Users/$1" "UniqueID" -} - -poly_user_hidden_get() { - dsclattr "/Users/$1" "IsHidden" -} - -poly_user_hidden_set() { - _sudo "in order to make $1 a hidden user" \ - /usr/bin/dscl . -create "/Users/$1" "IsHidden" "1" -} - -poly_user_home_get() { - dsclattr "/Users/$1" "NFSHomeDirectory" -} - -poly_user_home_set() { - _sudo "in order to give $1 a safe home directory" \ - /usr/bin/dscl . -create "/Users/$1" "NFSHomeDirectory" "$2" -} - -poly_user_note_get() { - dsclattr "/Users/$1" "RealName" -} - -poly_user_note_set() { - _sudo "in order to give $username a useful note" \ - /usr/bin/dscl . -create "/Users/$1" "RealName" "$2" -} - -poly_user_shell_get() { - dsclattr "/Users/$1" "UserShell" -} - -poly_user_shell_set() { - _sudo "in order to give $1 a safe home directory" \ - /usr/bin/dscl . -create "/Users/$1" "UserShell" "$2" -} - -poly_user_in_group_check() { - username=$1 - group=$2 - dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1 -} - -poly_user_in_group_set() { - username=$1 - group=$2 - - _sudo "Add $username to the $group group"\ - /usr/sbin/dseditgroup -o edit -t user \ - -a "$username" "$group" -} - -poly_user_primary_group_get() { - dsclattr "/Users/$1" "PrimaryGroupID" -} - -poly_user_primary_group_set() { - _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \ - /usr/bin/dscl . -create "/Users/$1" "PrimaryGroupID" "$2" -} - -poly_create_build_user() { - username=$1 - uid=$2 - builder_num=$3 - - _sudo "Creating the Nix build user (#$builder_num), $username" \ - /usr/bin/dscl . create "/Users/$username" \ - UniqueID "${uid}" -} diff --git a/third_party/nix/scripts/install-multi-user.sh b/third_party/nix/scripts/install-multi-user.sh deleted file mode 100644 index 5233762fa649..000000000000 --- a/third_party/nix/scripts/install-multi-user.sh +++ /dev/null @@ -1,798 +0,0 @@ -#!/usr/bin/env bash - -set -eu -set -o pipefail - -# Sourced from: -# - https://github.com/LnL7/nix-darwin/blob/8c29d0985d74b4a990238497c47a2542a5616b3c/bootstrap.sh -# - https://gist.github.com/expipiplus1/e571ce88c608a1e83547c918591b149f/ac504c6c1b96e65505fbda437a28ce563408ecb0 -# - https://github.com/NixOS/nixos-org-configurations/blob/a122f418797713d519aadf02e677fce0dc1cb446/delft/scripts/nix-mac-installer.sh -# - https://github.com/matthewbauer/macNixOS/blob/f6045394f9153edea417be90c216788e754feaba/install-macNixOS.sh -# - https://gist.github.com/LnL7/9717bd6cdcb30b086fd7f2093e5f8494/86b26f852ce563e973acd30f796a9a416248c34a -# -# however tracking which bits came from which would be impossible. - -readonly ESC='\033[0m' -readonly BOLD='\033[1m' -readonly BLUE='\033[34m' -readonly BLUE_UL='\033[4;34m' -readonly GREEN='\033[32m' -readonly GREEN_UL='\033[4;32m' -readonly RED='\033[31m' - -readonly NIX_USER_COUNT="32" -readonly NIX_BUILD_GROUP_ID="30000" -readonly NIX_BUILD_GROUP_NAME="nixbld" -readonly NIX_FIRST_BUILD_UID="30001" -# Please don't change this. We don't support it, because the -# default shell profile that comes with Nix doesn't support it. -readonly NIX_ROOT="/nix" - -readonly PROFILE_TARGETS=("/etc/bashrc" "/etc/profile.d/nix.sh" "/etc/zshrc") -readonly PROFILE_BACKUP_SUFFIX=".backup-before-nix" -readonly PROFILE_NIX_FILE="$NIX_ROOT/var/nix/profiles/default/etc/profile.d/nix-daemon.sh" - -readonly NIX_INSTALLED_NIX="@nix@" -readonly NIX_INSTALLED_CACERT="@cacert@" -readonly EXTRACTED_NIX_PATH="$(dirname "$0")" - -readonly ROOT_HOME=$(echo ~root) - -if [ -t 0 ]; then - readonly IS_HEADLESS='no' -else - readonly IS_HEADLESS='yes' -fi - -headless() { - if [ "$IS_HEADLESS" = "yes" ]; then - return 0 - else - return 1 - fi -} - -contactme() { - echo "We'd love to help if you need it." - echo "" - echo "If you can, open an issue at https://github.com/nixos/nix/issues" - echo "" - echo "Or feel free to contact the team," - echo " - on IRC #nixos on irc.freenode.net" - echo " - on twitter @nixos_org" -} - -uninstall_directions() { - subheader "Uninstalling nix:" - local step=0 - - if poly_service_installed_check; then - step=$((step + 1)) - poly_service_uninstall_directions "$step" - fi - - for profile_target in "${PROFILE_TARGETS[@]}"; do - if [ -e "$profile_target" ] && [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then - step=$((step + 1)) - cat <<EOF -$step. Restore $profile_target$PROFILE_BACKUP_SUFFIX back to $profile_target - - sudo mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target - -(after this one, you may need to re-open any terminals that were -opened while it existed.) - -EOF - fi - done - - step=$((step + 1)) - cat <<EOF -$step. Delete the files Nix added to your system: - - sudo rm -rf /etc/nix $NIX_ROOT $ROOT_HOME/.nix-profile $ROOT_HOME/.nix-defexpr $ROOT_HOME/.nix-channels $HOME/.nix-profile $HOME/.nix-defexpr $HOME/.nix-channels - -and that is it. - -EOF - -} - -nix_user_for_core() { - printf "nixbld%d" "$1" -} - -nix_uid_for_core() { - echo $((NIX_FIRST_BUILD_UID + $1 - 1)) -} - -_textout() { - echo -en "$1" - shift - if [ "$*" = "" ]; then - cat - else - echo "$@" - fi - echo -en "$ESC" -} - -header() { - follow="---------------------------------------------------------" - header=$(echo "---- $* $follow$follow$follow" | head -c 80) - echo "" - _textout "$BLUE" "$header" -} - -warningheader() { - follow="---------------------------------------------------------" - header=$(echo "---- $* $follow$follow$follow" | head -c 80) - echo "" - _textout "$RED" "$header" -} - -subheader() { - echo "" - _textout "$BLUE_UL" "$*" -} - -row() { - printf "$BOLD%s$ESC:\\t%s\\n" "$1" "$2" -} - -task() { - echo "" - ok "~~> $1" -} - -bold() { - echo "$BOLD$*$ESC" -} - -ok() { - _textout "$GREEN" "$@" -} - -warning() { - warningheader "warning!" - cat - echo "" -} - -failure() { - header "oh no!" - _textout "$RED" "$@" - echo "" - _textout "$RED" "$(contactme)" - trap finish_cleanup EXIT - exit 1 -} - -ui_confirm() { - _textout "$GREEN$GREEN_UL" "$1" - - if headless; then - echo "No TTY, assuming you would say yes :)" - return 0 - fi - - local prompt="[y/n] " - echo -n "$prompt" - while read -r y; do - if [ "$y" = "y" ]; then - echo "" - return 0 - elif [ "$y" = "n" ]; then - echo "" - return 1 - else - _textout "$RED" "Sorry, I didn't understand. I can only understand answers of y or n" - echo -n "$prompt" - fi - done - echo "" - return 1 -} - -__sudo() { - local expl="$1" - local cmd="$2" - shift - header "sudo execution" - - echo "I am executing:" - echo "" - printf " $ sudo %s\\n" "$cmd" - echo "" - echo "$expl" - echo "" - - return 0 -} - -_sudo() { - local expl="$1" - shift - if ! headless; then - __sudo "$expl" "$*" - fi - sudo "$@" -} - - -readonly SCRATCH=$(mktemp -d -t tmp.XXXXXXXXXX) -function finish_cleanup { - rm -rf "$SCRATCH" -} - -function finish_fail { - finish_cleanup - - failure <<EOF -Jeeze, something went wrong. If you can take all the output and open -an issue, we'd love to fix the problem so nobody else has this issue. - -:( -EOF -} -trap finish_fail EXIT - -channel_update_failed=0 -function finish_success { - finish_cleanup - - ok "Alright! We're done!" - if [ "x$channel_update_failed" = x1 ]; then - echo "" - echo "But fetching the nixpkgs channel failed. (Are you offline?)" - echo "To try again later, run \"sudo -i nix-channel --update nixpkgs\"." - fi - cat <<EOF - -Before Nix will work in your existing shells, you'll need to close -them and open them again. Other than that, you should be ready to go. - -Try it! Open a new terminal, and type: - - $ nix-shell -p nix-info --run "nix-info -m" - -Thank you for using this installer. If you have any feedback, don't -hesitate: - -$(contactme) -EOF -} - - -validate_starting_assumptions() { - poly_validate_assumptions - - if [ $EUID -eq 0 ]; then - failure <<EOF -Please do not run this script with root privileges. We will call sudo -when we need to. -EOF - fi - - if type nix-env 2> /dev/null >&2; then - failure <<EOF -Nix already appears to be installed, and this tool assumes it is -_not_ yet installed. - -$(uninstall_directions) -EOF - fi - - if [ "${NIX_REMOTE:-}" != "" ]; then - failure <<EOF -For some reason, \$NIX_REMOTE is set. It really should not be set -before this installer runs, and it hints that Nix is currently -installed. Please delete the old Nix installation and start again. - -Note: You might need to close your shell window and open a new shell -to clear the variable. -EOF - fi - - if echo "${SSL_CERT_FILE:-}" | grep -qE "(nix/var/nix|nix-profile)"; then - failure <<EOF -It looks like \$SSL_CERT_FILE is set to a path that used to be part of -the old Nix installation. Please unset that variable and try again: - - $ unset SSL_CERT_FILE - -EOF - fi - - for file in ~/.bash_profile ~/.bash_login ~/.profile ~/.zshenv ~/.zprofile ~/.zshrc ~/.zlogin; do - if [ -f "$file" ]; then - if grep -l "^[^#].*.nix-profile" "$file"; then - failure <<EOF -I found a reference to a ".nix-profile" in $file. -This has a high chance of breaking a new nix installation. It was most -likely put there by a previous Nix installer. - -Please remove this reference and try running this again. You should -also look for similar references in: - - - ~/.bash_profile - - ~/.bash_login - - ~/.profile - -or other shell init files that you may have. - -$(uninstall_directions) -EOF - fi - fi - done - - if [ -d /nix/store ] || [ -d /nix/var ]; then - failure <<EOF -There are some relics of a previous installation of Nix at /nix, and -this scripts assumes Nix is _not_ yet installed. Please delete the old -Nix installation and start again. - -$(uninstall_directions) -EOF - fi - - if [ -d /etc/nix ]; then - failure <<EOF -There are some relics of a previous installation of Nix at /etc/nix, and -this scripts assumes Nix is _not_ yet installed. Please delete the old -Nix installation and start again. - -$(uninstall_directions) -EOF - fi - - for profile_target in "${PROFILE_TARGETS[@]}"; do - if [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then - failure <<EOF -When this script runs, it backs up the current $profile_target to -$profile_target$PROFILE_BACKUP_SUFFIX. This backup file already exists, though. - -Please follow these instructions to clean up the old backup file: - -1. Copy $profile_target and $profile_target$PROFILE_BACKUP_SUFFIX to another place, just -in case. - -2. Take care to make sure that $profile_target$PROFILE_BACKUP_SUFFIX doesn't look like -it has anything nix-related in it. If it does, something is probably -quite wrong. Please open an issue or get in touch immediately. - -3. Take care to make sure that $profile_target doesn't look like it has -anything nix-related in it. If it does, and $profile_target _did not_, -run: - - $ /usr/bin/sudo /bin/mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target - -and try again. -EOF - fi - - if [ -e "$profile_target" ] && grep -qi "nix" "$profile_target"; then - failure <<EOF -It looks like $profile_target already has some Nix configuration in -there. There should be no reason to run this again. If you're having -trouble, please open an issue. -EOF - fi - done - - danger_paths=("$ROOT_HOME/.nix-defexpr" "$ROOT_HOME/.nix-channels" "$ROOT_HOME/.nix-profile") - for danger_path in "${danger_paths[@]}"; do - if _sudo "making sure that $danger_path doesn't exist" \ - test -e "$danger_path"; then - failure <<EOF -I found a file at $danger_path, which is a relic of a previous -installation. You must first delete this file before continuing. - -$(uninstall_directions) -EOF - fi - done -} - -setup_report() { - header "Nix config report" - row " Temp Dir" "$SCRATCH" - row " Nix Root" "$NIX_ROOT" - row " Build Users" "$NIX_USER_COUNT" - row " Build Group ID" "$NIX_BUILD_GROUP_ID" - row "Build Group Name" "$NIX_BUILD_GROUP_NAME" - if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" != "" ]; then - row "Preexisting Install" "Allowed" - fi - - subheader "build users:" - - row " Username" "UID" - for i in $(seq 1 "$NIX_USER_COUNT"); do - row " $(nix_user_for_core "$i")" "$(nix_uid_for_core "$i")" - done - echo "" -} - -create_build_group() { - local primary_group_id - - task "Setting up the build group $NIX_BUILD_GROUP_NAME" - if ! poly_group_exists "$NIX_BUILD_GROUP_NAME"; then - poly_create_build_group - row " Created" "Yes" - else - primary_group_id=$(poly_group_id_get "$NIX_BUILD_GROUP_NAME") - if [ "$primary_group_id" -ne "$NIX_BUILD_GROUP_ID" ]; then - failure <<EOF -It seems the build group $NIX_BUILD_GROUP_NAME already exists, but -with the UID $primary_group_id. This script can't really handle -that right now, so I'm going to give up. - -You can fix this by editing this script and changing the -NIX_BUILD_GROUP_ID variable near the top to from $NIX_BUILD_GROUP_ID -to $primary_group_id and re-run. -EOF - else - row " Exists" "Yes" - fi - fi -} - -create_build_user_for_core() { - local coreid - local username - local uid - - coreid="$1" - username=$(nix_user_for_core "$coreid") - uid=$(nix_uid_for_core "$coreid") - - task "Setting up the build user $username" - - if ! poly_user_exists "$username"; then - poly_create_build_user "$username" "$uid" "$coreid" - row " Created" "Yes" - else - actual_uid=$(poly_user_id_get "$username") - if [ "$actual_uid" != "$uid" ]; then - failure <<EOF -It seems the build user $username already exists, but with the UID -with the UID '$actual_uid'. This script can't really handle that right -now, so I'm going to give up. - -If you already created the users and you know they start from -$actual_uid and go up from there, you can edit this script and change -NIX_FIRST_BUILD_UID near the top of the file to $actual_uid and try -again. -EOF - else - row " Exists" "Yes" - fi - fi - - if [ "$(poly_user_hidden_get "$username")" = "1" ]; then - row " Hidden" "Yes" - else - poly_user_hidden_set "$username" - row " Hidden" "Yes" - fi - - if [ "$(poly_user_home_get "$username")" = "/var/empty" ]; then - row " Home Directory" "/var/empty" - else - poly_user_home_set "$username" "/var/empty" - row " Home Directory" "/var/empty" - fi - - # We use grep instead of an equality check because it is difficult - # to extract _just_ the user's note, instead it is prefixed with - # some plist junk. This was causing the user note to always be set, - # even if there was no reason for it. - if ! poly_user_note_get "$username" | grep -q "Nix build user $coreid"; then - row " Note" "Nix build user $coreid" - else - poly_user_note_set "$username" "Nix build user $coreid" - row " Note" "Nix build user $coreid" - fi - - if [ "$(poly_user_shell_get "$username")" = "/sbin/nologin" ]; then - row " Logins Disabled" "Yes" - else - poly_user_shell_set "$username" "/sbin/nologin" - row " Logins Disabled" "Yes" - fi - - if poly_user_in_group_check "$username" "$NIX_BUILD_GROUP_NAME"; then - row " Member of $NIX_BUILD_GROUP_NAME" "Yes" - else - poly_user_in_group_set "$username" "$NIX_BUILD_GROUP_NAME" - row " Member of $NIX_BUILD_GROUP_NAME" "Yes" - fi - - if [ "$(poly_user_primary_group_get "$username")" = "$NIX_BUILD_GROUP_ID" ]; then - row " PrimaryGroupID" "$NIX_BUILD_GROUP_ID" - else - poly_user_primary_group_set "$username" "$NIX_BUILD_GROUP_ID" - row " PrimaryGroupID" "$NIX_BUILD_GROUP_ID" - fi -} - -create_build_users() { - for i in $(seq 1 "$NIX_USER_COUNT"); do - create_build_user_for_core "$i" - done -} - -create_directories() { - # FIXME: remove all of this because it duplicates LocalStore::LocalStore(). - - _sudo "to make the basic directory structure of Nix (part 1)" \ - mkdir -pv -m 0755 /nix /nix/var /nix/var/log /nix/var/log/nix /nix/var/log/nix/drvs /nix/var/nix{,/db,/gcroots,/profiles,/temproots,/userpool} /nix/var/nix/{gcroots,profiles}/per-user - - _sudo "to make the basic directory structure of Nix (part 2)" \ - mkdir -pv -m 1775 /nix/store - - _sudo "to make the basic directory structure of Nix (part 3)" \ - chgrp "$NIX_BUILD_GROUP_NAME" /nix/store - - _sudo "to place the default nix daemon configuration (part 1)" \ - mkdir -pv -m 0555 /etc/nix -} - -place_channel_configuration() { - echo "https://nixos.org/channels/nixpkgs-unstable nixpkgs" > "$SCRATCH/.nix-channels" - _sudo "to set up the default system channel (part 1)" \ - install -m 0664 "$SCRATCH/.nix-channels" "$ROOT_HOME/.nix-channels" -} - -welcome_to_nix() { - ok "Welcome to the Multi-User Nix Installation" - - cat <<EOF - -This installation tool will set up your computer with the Nix package -manager. This will happen in a few stages: - -1. Make sure your computer doesn't already have Nix. If it does, I - will show you instructions on how to clean up your old one. - -2. Show you what we are going to install and where. Then we will ask - if you are ready to continue. - -3. Create the system users and groups that the Nix daemon uses to run - builds. - -4. Perform the basic installation of the Nix files daemon. - -5. Configure your shell to import special Nix Profile files, so you - can use Nix. - -6. Start the Nix daemon. - -EOF - - if ui_confirm "Would you like to see a more detailed list of what we will do?"; then - cat <<EOF - -We will: - - - make sure your computer doesn't already have Nix files - (if it does, I will tell you how to clean them up.) - - create local users (see the list above for the users we'll make) - - create a local group ($NIX_BUILD_GROUP_NAME) - - install Nix in to $NIX_ROOT - - create a configuration file in /etc/nix - - set up the "default profile" by creating some Nix-related files in - $ROOT_HOME -EOF - for profile_target in "${PROFILE_TARGETS[@]}"; do - if [ -e "$profile_target" ]; then - cat <<EOF - - back up $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX - - update $profile_target to include some Nix configuration -EOF - fi - done - poly_service_setup_note - if ! ui_confirm "Ready to continue?"; then - failure <<EOF -Okay, maybe you would like to talk to the team. -EOF - fi - fi -} - -chat_about_sudo() { - header "let's talk about sudo" - - if headless; then - cat <<EOF -This script is going to call sudo a lot. Normally, it would show you -exactly what commands it is running and why. However, the script is -run in a headless fashion, like this: - - $ curl https://nixos.org/nix/install | sh - -or maybe in a CI pipeline. Because of that, we're going to skip the -verbose output in the interest of brevity. - -If you would like to -see the output, try like this: - - $ curl -o install-nix https://nixos.org/nix/install - $ sh ./install-nix - -EOF - return 0 - fi - - cat <<EOF -This script is going to call sudo a lot. Every time we do, it'll -output exactly what it'll do, and why. - -Just like this: -EOF - - __sudo "to demonstrate how our sudo prompts look" \ - echo "this is a sudo prompt" - - cat <<EOF - -This might look scary, but everything can be undone by running just a -few commands. We used to ask you to confirm each time sudo ran, but it -was too many times. Instead, I'll just ask you this one time: - -EOF - if ui_confirm "Can we use sudo?"; then - ok "Yay! Thanks! Let's get going!" - else - failure <<EOF -That is okay, but we can't install. -EOF - fi -} - -install_from_extracted_nix() { - ( - cd "$EXTRACTED_NIX_PATH" - - _sudo "to copy the basic Nix files to the new store at $NIX_ROOT/store" \ - rsync -rlpt ./store/* "$NIX_ROOT/store/" - - if [ -d "$NIX_INSTALLED_NIX" ]; then - echo " Alright! We have our first nix at $NIX_INSTALLED_NIX" - else - failure <<EOF -Something went wrong, and I didn't find Nix installed at -$NIX_INSTALLED_NIX. -EOF - fi - - cat ./.reginfo \ - | _sudo "to load data for the first time in to the Nix Database" \ - "$NIX_INSTALLED_NIX/bin/nix-store" --load-db - - echo " Just finished getting the nix database ready." - ) -} - -shell_source_lines() { - cat <<EOF - -# Nix -if [ -e '$PROFILE_NIX_FILE' ]; then - . '$PROFILE_NIX_FILE' -fi -# End Nix - -EOF -} - -configure_shell_profile() { - # If there is an /etc/profile.d directory, we want to ensure there - # is a nix.sh within it, so we can use the following loop to add - # the source lines to it. Note that I'm _not_ adding the source - # lines here, because we want to be using the regular machinery. - # - # If we go around that machinery, it becomes more complicated and - # adds complications to the uninstall instruction generator and - # old instruction sniffer as well. - if [ -d /etc/profile.d ]; then - _sudo "create a stub /etc/profile.d/nix.sh which will be updated" \ - touch /etc/profile.d/nix.sh - fi - - for profile_target in "${PROFILE_TARGETS[@]}"; do - if [ -e "$profile_target" ]; then - _sudo "to back up your current $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX" \ - cp "$profile_target" "$profile_target$PROFILE_BACKUP_SUFFIX" - - shell_source_lines \ - | _sudo "extend your $profile_target with nix-daemon settings" \ - tee -a "$profile_target" - fi - done -} - -setup_default_profile() { - _sudo "to installing a bootstrapping Nix in to the default Profile" \ - HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_NIX" - - if [ -z "${NIX_SSL_CERT_FILE:-}" ] || ! [ -f "${NIX_SSL_CERT_FILE:-}" ]; then - _sudo "to installing a bootstrapping SSL certificate just for Nix in to the default Profile" \ - HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_CACERT" - export NIX_SSL_CERT_FILE=/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt - fi - - # Have to explicitly pass NIX_SSL_CERT_FILE as part of the sudo call, - # otherwise it will be lost in environments where sudo doesn't pass - # all the environment variables by default. - _sudo "to update the default channel in the default profile" \ - HOME="$ROOT_HOME" NIX_SSL_CERT_FILE="$NIX_SSL_CERT_FILE" "$NIX_INSTALLED_NIX/bin/nix-channel" --update nixpkgs \ - || channel_update_failed=1 - -} - - -place_nix_configuration() { - cat <<EOF > "$SCRATCH/nix.conf" -build-users-group = $NIX_BUILD_GROUP_NAME -EOF - _sudo "to place the default nix daemon configuration (part 2)" \ - install -m 0664 "$SCRATCH/nix.conf" /etc/nix/nix.conf -} - -main() { - if [ "$(uname -s)" = "Darwin" ]; then - # shellcheck source=./install-darwin-multi-user.sh - . "$EXTRACTED_NIX_PATH/install-darwin-multi-user.sh" - elif [ "$(uname -s)" = "Linux" ]; then - if [ -e /run/systemd/system ]; then - # shellcheck source=./install-systemd-multi-user.sh - . "$EXTRACTED_NIX_PATH/install-systemd-multi-user.sh" - else - failure "Sorry, the multi-user installation requires systemd on Linux (detected using /run/systemd/system)" - fi - else - failure "Sorry, I don't know what to do on $(uname)" - fi - - welcome_to_nix - chat_about_sudo - - if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" = "" ]; then - validate_starting_assumptions - fi - - setup_report - - if ! ui_confirm "Ready to continue?"; then - ok "Alright, no changes have been made :)" - contactme - trap finish_cleanup EXIT - exit 1 - fi - - create_build_group - create_build_users - create_directories - place_channel_configuration - install_from_extracted_nix - - configure_shell_profile - - set +eu - . /etc/profile - set -eu - - setup_default_profile - place_nix_configuration - poly_configure_nix_daemon_service - - trap finish_success EXIT -} - - -main diff --git a/third_party/nix/scripts/install-nix-from-closure.sh b/third_party/nix/scripts/install-nix-from-closure.sh deleted file mode 100644 index 3f15818547ab..000000000000 --- a/third_party/nix/scripts/install-nix-from-closure.sh +++ /dev/null @@ -1,180 +0,0 @@ -#!/bin/sh - -set -e - -dest="/nix" -self="$(dirname "$0")" -nix="@nix@" -cacert="@cacert@" - - -if ! [ -e "$self/.reginfo" ]; then - echo "$0: incomplete installer (.reginfo is missing)" >&2 -fi - -if [ -z "$USER" ] && ! USER=$(id -u -n); then - echo "$0: \$USER is not set" >&2 - exit 1 -fi - -if [ -z "$HOME" ]; then - echo "$0: \$HOME is not set" >&2 - exit 1 -fi - -# macOS support for 10.12.6 or higher -if [ "$(uname -s)" = "Darwin" ]; then - macos_major=$(sw_vers -productVersion | cut -d '.' -f 2) - macos_minor=$(sw_vers -productVersion | cut -d '.' -f 3) - if [ "$macos_major" -lt 12 ] || { [ "$macos_major" -eq 12 ] && [ "$macos_minor" -lt 6 ]; }; then - echo "$0: macOS $(sw_vers -productVersion) is not supported, upgrade to 10.12.6 or higher" - exit 1 - fi -fi - -# Determine if we could use the multi-user installer or not -if [ "$(uname -s)" = "Darwin" ]; then - echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2 -elif [ "$(uname -s)" = "Linux" ] && [ -e /run/systemd/system ]; then - echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2 -fi - -INSTALL_MODE=no-daemon -# Trivially handle the --daemon / --no-daemon options -if [ "x${1:-}" = "x--no-daemon" ]; then - INSTALL_MODE=no-daemon -elif [ "x${1:-}" = "x--daemon" ]; then - INSTALL_MODE=daemon -elif [ "x${1:-}" != "x" ]; then - ( - echo "Nix Installer [--daemon|--no-daemon]" - - echo "Choose installation method." - echo "" - echo " --daemon: Installs and configures a background daemon that manages the store," - echo " providing multi-user support and better isolation for local builds." - echo " Both for security and reproducibility, this method is recommended if" - echo " supported on your platform." - echo " See https://nixos.org/nix/manual/#sect-multi-user-installation" - echo "" - echo " --no-daemon: Simple, single-user installation that does not require root and is" - echo " trivial to uninstall." - echo " (default)" - echo "" - ) >&2 - exit -fi - -if [ "$INSTALL_MODE" = "daemon" ]; then - printf '\e[1;31mSwitching to the Daemon-based Installer\e[0m\n' - exec "$self/install-multi-user" - exit 0 -fi - -if [ "$(id -u)" -eq 0 ]; then - printf '\e[1;31mwarning: installing Nix as root is not supported by this script!\e[0m\n' -fi - -echo "performing a single-user installation of Nix..." >&2 - -if ! [ -e $dest ]; then - cmd="mkdir -m 0755 $dest && chown $USER $dest" - echo "directory $dest does not exist; creating it by running '$cmd' using sudo" >&2 - if ! sudo sh -c "$cmd"; then - echo "$0: please manually run '$cmd' as root to create $dest" >&2 - exit 1 - fi -fi - -if ! [ -w $dest ]; then - echo "$0: directory $dest exists, but is not writable by you. This could indicate that another user has already performed a single-user installation of Nix on this system. If you wish to enable multi-user support see http://nixos.org/nix/manual/#ssec-multi-user. If you wish to continue with a single-user install for $USER please run 'chown -R $USER $dest' as root." >&2 - exit 1 -fi - -mkdir -p $dest/store - -printf "copying Nix to %s..." "${dest}/store" >&2 - -for i in $(cd "$self/store" >/dev/null && echo ./*); do - printf "." >&2 - i_tmp="$dest/store/$i.$$" - if [ -e "$i_tmp" ]; then - rm -rf "$i_tmp" - fi - if ! [ -e "$dest/store/$i" ]; then - cp -Rp "$self/store/$i" "$i_tmp" - chmod -R a-w "$i_tmp" - chmod +w "$i_tmp" - mv "$i_tmp" "$dest/store/$i" - chmod -w "$dest/store/$i" - fi -done -echo "" >&2 - -if ! "$nix/bin/nix-store" --load-db < "$self/.reginfo"; then - echo "$0: unable to register valid paths" >&2 - exit 1 -fi - -. "$nix/etc/profile.d/nix.sh" - -if ! "$nix/bin/nix-env" -i "$nix"; then - echo "$0: unable to install Nix into your default profile" >&2 - exit 1 -fi - -# Install an SSL certificate bundle. -if [ -z "$NIX_SSL_CERT_FILE" ] || ! [ -f "$NIX_SSL_CERT_FILE" ]; then - $nix/bin/nix-env -i "$cacert" - export NIX_SSL_CERT_FILE="$HOME/.nix-profile/etc/ssl/certs/ca-bundle.crt" -fi - -# Subscribe the user to the Nixpkgs channel and fetch it. -if ! $nix/bin/nix-channel --list | grep -q "^nixpkgs "; then - $nix/bin/nix-channel --add https://nixos.org/channels/nixpkgs-unstable -fi -if [ -z "$_NIX_INSTALLER_TEST" ]; then - if ! $nix/bin/nix-channel --update nixpkgs; then - echo "Fetching the nixpkgs channel failed. (Are you offline?)" - echo "To try again later, run \"nix-channel --update nixpkgs\"." - fi -fi - -added= -p=$HOME/.nix-profile/etc/profile.d/nix.sh -if [ -z "$NIX_INSTALLER_NO_MODIFY_PROFILE" ]; then - # Make the shell source nix.sh during login. - for i in .bash_profile .bash_login .profile; do - fn="$HOME/$i" - if [ -w "$fn" ]; then - if ! grep -q "$p" "$fn"; then - echo "modifying $fn..." >&2 - echo "if [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn" - fi - added=1 - break - fi - done -fi - -if [ -z "$added" ]; then - cat >&2 <<EOF - -Installation finished! To ensure that the necessary environment -variables are set, please add the line - - . $p - -to your shell profile (e.g. ~/.profile). -EOF -else - cat >&2 <<EOF - -Installation finished! To ensure that the necessary environment -variables are set, either log in again, or type - - . $p - -in your shell. -EOF -fi diff --git a/third_party/nix/scripts/install-systemd-multi-user.sh b/third_party/nix/scripts/install-systemd-multi-user.sh deleted file mode 100755 index bef3ac4f991f..000000000000 --- a/third_party/nix/scripts/install-systemd-multi-user.sh +++ /dev/null @@ -1,188 +0,0 @@ -#!/usr/bin/env bash - -set -eu -set -o pipefail - -readonly SERVICE_SRC=/lib/systemd/system/nix-daemon.service -readonly SERVICE_DEST=/etc/systemd/system/nix-daemon.service - -readonly SOCKET_SRC=/lib/systemd/system/nix-daemon.socket -readonly SOCKET_DEST=/etc/systemd/system/nix-daemon.socket - - -# Path for the systemd override unit file to contain the proxy settings -readonly SERVICE_OVERRIDE=${SERVICE_DEST}.d/override.conf - -create_systemd_override() { - header "Configuring proxy for the nix-daemon service" - _sudo "create directory for systemd unit override" mkdir -p "$(dirname $SERVICE_OVERRIDE)" - cat <<EOF | _sudo "create systemd unit override" tee "$SERVICE_OVERRIDE" -[Service] -$1 -EOF -} - -# Gather all non-empty proxy environment variables into a string -create_systemd_proxy_env() { - vars="http_proxy https_proxy ftp_proxy no_proxy HTTP_PROXY HTTPS_PROXY FTP_PROXY NO_PROXY" - for v in $vars; do - if [ "x${!v:-}" != "x" ]; then - echo "Environment=${v}=${!v}" - fi - done -} - -handle_network_proxy() { - # Create a systemd unit override with proxy environment variables - # if any proxy environment variables are not empty. - PROXY_ENV_STRING=$(create_systemd_proxy_env) - if [ -n "${PROXY_ENV_STRING}" ]; then - create_systemd_override "${PROXY_ENV_STRING}" - fi -} - -poly_validate_assumptions() { - if [ "$(uname -s)" != "Linux" ]; then - failure "This script is for use with Linux!" - fi -} - -poly_service_installed_check() { - [ "$(systemctl is-enabled nix-daemon.service)" = "linked" ] \ - || [ "$(systemctl is-enabled nix-daemon.socket)" = "enabled" ] -} - -poly_service_uninstall_directions() { - cat <<EOF -$1. Delete the systemd service and socket units - - sudo systemctl stop nix-daemon.socket - sudo systemctl stop nix-daemon.service - sudo systemctl disable nix-daemon.socket - sudo systemctl disable nix-daemon.service - sudo systemctl daemon-reload -EOF -} - -poly_service_setup_note() { - cat <<EOF - - load and start a service (at $SERVICE_DEST - and $SOCKET_DEST) for nix-daemon - -EOF -} - -poly_configure_nix_daemon_service() { - _sudo "to set up the nix-daemon service" \ - systemctl link "/nix/var/nix/profiles/default$SERVICE_SRC" - - _sudo "to set up the nix-daemon socket service" \ - systemctl enable "/nix/var/nix/profiles/default$SOCKET_SRC" - - handle_network_proxy - - _sudo "to load the systemd unit for nix-daemon" \ - systemctl daemon-reload - - _sudo "to start the nix-daemon.socket" \ - systemctl start nix-daemon.socket - - _sudo "to start the nix-daemon.service" \ - systemctl start nix-daemon.service - -} - -poly_group_exists() { - getent group "$1" > /dev/null 2>&1 -} - -poly_group_id_get() { - getent group "$1" | cut -d: -f3 -} - -poly_create_build_group() { - _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \ - groupadd -g "$NIX_BUILD_GROUP_ID" --system \ - "$NIX_BUILD_GROUP_NAME" >&2 -} - -poly_user_exists() { - getent passwd "$1" > /dev/null 2>&1 -} - -poly_user_id_get() { - getent passwd "$1" | cut -d: -f3 -} - -poly_user_hidden_get() { - echo "1" -} - -poly_user_hidden_set() { - true -} - -poly_user_home_get() { - getent passwd "$1" | cut -d: -f6 -} - -poly_user_home_set() { - _sudo "in order to give $1 a safe home directory" \ - usermod --home "$2" "$1" -} - -poly_user_note_get() { - getent passwd "$1" | cut -d: -f5 -} - -poly_user_note_set() { - _sudo "in order to give $1 a useful comment" \ - usermod --comment "$2" "$1" -} - -poly_user_shell_get() { - getent passwd "$1" | cut -d: -f7 -} - -poly_user_shell_set() { - _sudo "in order to prevent $1 from logging in" \ - usermod --shell "$2" "$1" -} - -poly_user_in_group_check() { - groups "$1" | grep -q "$2" > /dev/null 2>&1 -} - -poly_user_in_group_set() { - _sudo "Add $1 to the $2 group"\ - usermod --append --groups "$2" "$1" -} - -poly_user_primary_group_get() { - getent passwd "$1" | cut -d: -f4 -} - -poly_user_primary_group_set() { - _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \ - usermod --gid "$2" "$1" - -} - -poly_create_build_user() { - username=$1 - uid=$2 - builder_num=$3 - - _sudo "Creating the Nix build user, $username" \ - useradd \ - --home-dir /var/empty \ - --comment "Nix build user $builder_num" \ - --gid "$NIX_BUILD_GROUP_ID" \ - --groups "$NIX_BUILD_GROUP_NAME" \ - --no-user-group \ - --system \ - --shell /sbin/nologin \ - --uid "$uid" \ - --password "!" \ - "$username" -} diff --git a/third_party/nix/scripts/install.in b/third_party/nix/scripts/install.in deleted file mode 100644 index 902758b138a5..000000000000 --- a/third_party/nix/scripts/install.in +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/sh - -# This script installs the Nix package manager on your system by -# downloading a binary distribution and running its installer script -# (which in turn creates and populates /nix). - -{ # Prevent execution if this script was only partially downloaded -oops() { - echo "$0:" "$@" >&2 - exit 1 -} - -tmpDir="$(mktemp -d -t nix-binary-tarball-unpack.XXXXXXXXXX || \ - oops "Can't create temporary directory for downloading the Nix binary tarball")" -cleanup() { - rm -rf "$tmpDir" -} -trap cleanup EXIT INT QUIT TERM - -require_util() { - command -v "$1" > /dev/null 2>&1 || - oops "you do not have '$1' installed, which I need to $2" -} - -case "$(uname -s).$(uname -m)" in - Linux.x86_64) system=x86_64-linux; hash=@binaryTarball_x86_64-linux@;; - Linux.i?86) system=i686-linux; hash=@binaryTarball_i686-linux@;; - Linux.aarch64) system=aarch64-linux; hash=@binaryTarball_aarch64-linux@;; - Darwin.x86_64) system=x86_64-darwin; hash=@binaryTarball_x86_64-darwin@;; - *) oops "sorry, there is no binary distribution of Nix for your platform";; -esac - -url="https://nixos.org/releases/nix/nix-@nixVersion@/nix-@nixVersion@-$system.tar.xz" - -tarball="$tmpDir/$(basename "$tmpDir/nix-@nixVersion@-$system.tar.xz")" - -require_util curl "download the binary tarball" -require_util tar "unpack the binary tarball" - -echo "downloading Nix @nixVersion@ binary tarball for $system from '$url' to '$tmpDir'..." -curl -L "$url" -o "$tarball" || oops "failed to download '$url'" - -if command -v sha256sum > /dev/null 2>&1; then - hash2="$(sha256sum -b "$tarball" | cut -c1-64)" -elif command -v shasum > /dev/null 2>&1; then - hash2="$(shasum -a 256 -b "$tarball" | cut -c1-64)" -elif command -v openssl > /dev/null 2>&1; then - hash2="$(openssl dgst -r -sha256 "$tarball" | cut -c1-64)" -else - oops "cannot verify the SHA-256 hash of '$url'; you need one of 'shasum', 'sha256sum', or 'openssl'" -fi - -if [ "$hash" != "$hash2" ]; then - oops "SHA-256 hash mismatch in '$url'; expected $hash, got $hash2" -fi - -unpack=$tmpDir/unpack -mkdir -p "$unpack" -tar -xf "$tarball" -C "$unpack" || oops "failed to unpack '$url'" - -script=$(echo "$unpack"/*/install) - -[ -e "$script" ] || oops "installation script is missing from the binary tarball!" -"$script" "$@" - -} # End of wrapping diff --git a/third_party/nix/scripts/nix-http-export.cgi.in b/third_party/nix/scripts/nix-http-export.cgi.in deleted file mode 100755 index 19a505af1c50..000000000000 --- a/third_party/nix/scripts/nix-http-export.cgi.in +++ /dev/null @@ -1,51 +0,0 @@ -#! /bin/sh - -export HOME=/tmp -export NIX_REMOTE=daemon - -TMP_DIR="${TMP_DIR:-/tmp/nix-export}" - -@coreutils@/mkdir -p "$TMP_DIR" || true -@coreutils@/chmod a+r "$TMP_DIR" - -needed_path="?$QUERY_STRING" -needed_path="${needed_path#*[?&]needed_path=}" -needed_path="${needed_path%%&*}" -#needed_path="$(echo $needed_path | ./unhttp)" -needed_path="${needed_path//%2B/+}" -needed_path="${needed_path//%3D/=}" - -echo needed_path: "$needed_path" >&2 - -NIX_STORE="${NIX_STORE_DIR:-/nix/store}" - -echo NIX_STORE: "${NIX_STORE}" >&2 - -full_path="${NIX_STORE}"/"$needed_path" - -if [ "$needed_path" != "${needed_path%.drv}" ]; then - echo "Status: 403 You should create the derivation file yourself" - echo "Content-Type: text/plain" - echo - echo "Refusing to disclose derivation contents" - exit -fi - -if @bindir@/nix-store --check-validity "$full_path"; then - if ! [ -e nix-export/"$needed_path".nar.gz ]; then - @bindir@/nix-store --export "$full_path" | @gzip@ > "$TMP_DIR"/"$needed_path".nar.gz - @coreutils@/ln -fs "$TMP_DIR"/"$needed_path".nar.gz nix-export/"$needed_path".nar.gz - fi; - echo "Status: 301 Moved" - echo "Location: nix-export/"$needed_path".nar.gz" - echo -else - echo "Status: 404 No such path found" - echo "Content-Type: text/plain" - echo - echo "Path not found:" - echo "$needed_path" - echo "checked:" - echo "$full_path" -fi - diff --git a/third_party/nix/scripts/nix-profile-daemon.sh.in b/third_party/nix/scripts/nix-profile-daemon.sh.in deleted file mode 100644 index 47655080a674..000000000000 --- a/third_party/nix/scripts/nix-profile-daemon.sh.in +++ /dev/null @@ -1,29 +0,0 @@ -# Only execute this file once per shell. -if [ -n "${__ETC_PROFILE_NIX_SOURCED:-}" ]; then return; fi -__ETC_PROFILE_NIX_SOURCED=1 - -export NIX_USER_PROFILE_DIR="@localstatedir@/nix/profiles/per-user/$USER" -export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile" - -# Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work. -if [ ! -z "${NIX_SSL_CERT_FILE:-}" ]; then - : # Allow users to override the NIX_SSL_CERT_FILE -elif [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch - export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt -elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed - export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem -elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS - export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt -elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS - export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt -else - # Fall back to what is in the nix profiles, favouring whatever is defined last. - for i in $NIX_PROFILES; do - if [ -e $i/etc/ssl/certs/ca-bundle.crt ]; then - export NIX_SSL_CERT_FILE=$i/etc/ssl/certs/ca-bundle.crt - fi - done -fi - -export NIX_PATH="nixpkgs=@localstatedir@/nix/profiles/per-user/root/channels/nixpkgs:@localstatedir@/nix/profiles/per-user/root/channels" -export PATH="$HOME/.nix-profile/bin:@localstatedir@/nix/profiles/default/bin:$PATH" diff --git a/third_party/nix/scripts/nix-profile.sh.in b/third_party/nix/scripts/nix-profile.sh.in deleted file mode 100644 index e15f7cd46b76..000000000000 --- a/third_party/nix/scripts/nix-profile.sh.in +++ /dev/null @@ -1,39 +0,0 @@ -if [ -n "$HOME" ] && [ -n "$USER" ]; then - - # Set up the per-user profile. - # This part should be kept in sync with nixpkgs:nixos/modules/programs/shell.nix - - NIX_LINK=$HOME/.nix-profile - - NIX_USER_PROFILE_DIR=@localstatedir@/nix/profiles/per-user/$USER - - # Append ~/.nix-defexpr/channels to $NIX_PATH so that <nixpkgs> - # paths work when the user has fetched the Nixpkgs channel. - export NIX_PATH=${NIX_PATH:+$NIX_PATH:}$HOME/.nix-defexpr/channels - - # Set up environment. - # This part should be kept in sync with nixpkgs:nixos/modules/programs/environment.nix - export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile" - - # Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work. - if [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch - export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt - elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed - export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem - elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS - export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt - elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS - export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt - elif [ -e "$NIX_LINK/etc/ssl/certs/ca-bundle.crt" ]; then # fall back to cacert in Nix profile - export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ssl/certs/ca-bundle.crt" - elif [ -e "$NIX_LINK/etc/ca-bundle.crt" ]; then # old cacert in Nix profile - export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ca-bundle.crt" - fi - - if [ -n "${MANPATH-}" ]; then - export MANPATH="$NIX_LINK/share/man:$MANPATH" - fi - - export PATH="$NIX_LINK/bin:$PATH" - unset NIX_LINK NIX_USER_PROFILE_DIR -fi diff --git a/third_party/nix/scripts/nix-reduce-build.in b/third_party/nix/scripts/nix-reduce-build.in deleted file mode 100755 index 50beb9d10b16..000000000000 --- a/third_party/nix/scripts/nix-reduce-build.in +++ /dev/null @@ -1,171 +0,0 @@ -#! @bash@ - -WORKING_DIRECTORY=$(mktemp -d "${TMPDIR:-/tmp}"/nix-reduce-build-XXXXXX); -cd "$WORKING_DIRECTORY"; - -if test -z "$1" || test "a--help" = "a$1" ; then - echo 'nix-reduce-build (paths or Nix expressions) -- (package sources)' >&2 - echo As in: >&2 - echo nix-reduce-build /etc/nixos/nixos -- ssh://user@somewhere.nowhere.example.org >&2 - echo nix-reduce-build /etc/nixos/nixos -- \\ - echo " " \''http://somewhere.nowhere.example.org/nix/nix-http-export.cgi?needed_path='\' >&2 - echo " store path name will be added into the end of the URL" >&2 - echo nix-reduce-build /etc/nixos/nixos -- file://home/user/nar/ >&2 - echo " that should be a directory where gzipped 'nix-store --export' ">&2 - echo " files are located (they should have .nar.gz extension)" >&2 - echo " Or all together: " >&2 - echo -e nix-reduce-build /expr.nix /e2.nix -- \\\\\\\n\ - " ssh://a@b.example.com http://n.example.com/get-nar?q= file://nar/" >&2 - echo " Also supports best-effort local builds of failing expression set:" >&2 - echo "nix-reduce-build /e.nix -- nix-daemon:// nix-self://" >&2 - echo " nix-daemon:// builds using daemon" - echo " nix-self:// builds directly using nix-store from current installation" >&2 - echo " nix-daemon-fixed:// and nix-self-fixed:// do the same, but only for" >&2; - echo "derivations with specified output hash (sha256, sha1 or md5)." >&2 - echo " nix-daemon-substitute:// and nix-self-substitute:// try to substitute" >&2; - echo "maximum amount of paths" >&2; - echo " nix-daemon-build:// and nix-self-build:// try to build (not substitute)" >&2; - echo "maximum amount of paths" >&2; - echo " If no package sources are specified, required paths are listed." >&2; - exit; -fi; - -while ! test "$1" = "--" || test "$1" = "" ; do - echo "$1" >> initial; >&2 - shift; -done -shift; -echo Will work on $(cat initial | wc -l) targets. >&2 - -while read ; do - case "$REPLY" in - ${NIX_STORE_DIR:-/nix/store}/*) - echo "$REPLY" >> paths; >&2 - ;; - *) - ( - IFS=: ; - nix-instantiate $REPLY >> paths; - ); - ;; - esac; -done < initial; -echo Proceeding $(cat paths | wc -l) paths. >&2 - -while read; do - case "$REPLY" in - *.drv) - echo "$REPLY" >> derivers; >&2 - ;; - *) - nix-store --query --deriver "$REPLY" >>derivers; - ;; - esac; -done < paths; -echo Found $(cat derivers | wc -l) derivers. >&2 - -cat derivers | xargs nix-store --query -R > derivers-closure; -echo Proceeding at most $(cat derivers-closure | wc -l) derivers. >&2 - -cat derivers-closure | egrep '[.]drv$' | xargs nix-store --query --outputs > wanted-paths; -cat derivers-closure | egrep -v '[.]drv$' >> wanted-paths; -echo Prepared $(cat wanted-paths | wc -l) paths to get. >&2 - -cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths; -echo We need $(cat needed-paths | wc -l) paths. >&2 - -egrep '[.]drv$' derivers-closure > critical-derivers; - -if test -z "$1" ; then - cat needed-paths; -fi; - -refresh_critical_derivers() { - echo "Finding needed derivers..." >&2; - cat critical-derivers | while read; do - if ! (nix-store --query --outputs "$REPLY" | xargs nix-store --check-validity &> /dev/null;); then - echo "$REPLY"; - fi; - done > new-critical-derivers; - mv new-critical-derivers critical-derivers; - echo The needed paths are realized by $(cat critical-derivers | wc -l) derivers. >&2 -} - -build_here() { - cat critical-derivers | while read; do - echo "Realising $REPLY using nix-daemon" >&2 - @bindir@/nix-store -r "${REPLY}" - done; -} - -try_to_substitute(){ - cat needed-paths | while read ; do - echo "Building $REPLY using nix-daemon" >&2 - @bindir@/nix-store -r "${NIX_STORE_DIR:-/nix/store}/${REPLY##*/}" - done; -} - -for i in "$@"; do - sshHost="${i#ssh://}"; - httpHost="${i#http://}"; - httpsHost="${i#https://}"; - filePath="${i#file:/}"; - if [ "$i" != "$sshHost" ]; then - cat needed-paths | while read; do - echo "Getting $REPLY and its closure over ssh" >&2 - nix-copy-closure --from "$sshHost" --gzip "$REPLY" </dev/null || true; - done; - elif [ "$i" != "$httpHost" ] || [ "$i" != "$httpsHost" ]; then - cat needed-paths | while read; do - echo "Getting $REPLY over http/https" >&2 - curl ${BAD_CERTIFICATE:+-k} -L "$i${REPLY##*/}" | gunzip | nix-store --import; - done; - elif [ "$i" != "$filePath" ] ; then - cat needed-paths | while read; do - echo "Installing $REPLY from file" >&2 - gunzip < "$filePath/${REPLY##*/}".nar.gz | nix-store --import; - done; - elif [ "$i" = "nix-daemon://" ] ; then - NIX_REMOTE=daemon try_to_substitute; - refresh_critical_derivers; - NIX_REMOTE=daemon build_here; - elif [ "$i" = "nix-self://" ] ; then - NIX_REMOTE= try_to_substitute; - refresh_critical_derivers; - NIX_REMOTE= build_here; - elif [ "$i" = "nix-daemon-fixed://" ] ; then - refresh_critical_derivers; - - cat critical-derivers | while read; do - if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then - echo "Realising $REPLY using nix-daemon" >&2 - NIX_REMOTE=daemon @bindir@/nix-store -r "${REPLY}" - fi; - done; - elif [ "$i" = "nix-self-fixed://" ] ; then - refresh_critical_derivers; - - cat critical-derivers | while read; do - if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then - echo "Realising $REPLY using direct Nix build" >&2 - NIX_REMOTE= @bindir@/nix-store -r "${REPLY}" - fi; - done; - elif [ "$i" = "nix-daemon-substitute://" ] ; then - NIX_REMOTE=daemon try_to_substitute; - elif [ "$i" = "nix-self-substitute://" ] ; then - NIX_REMOTE= try_to_substitute; - elif [ "$i" = "nix-daemon-build://" ] ; then - refresh_critical_derivers; - NIX_REMOTE=daemon build_here; - elif [ "$i" = "nix-self-build://" ] ; then - refresh_critical_derivers; - NIX_REMOTE= build_here; - fi; - mv needed-paths wanted-paths; - cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths; - echo We still need $(cat needed-paths | wc -l) paths. >&2 -done; - -cd / -rm -r "$WORKING_DIRECTORY" diff --git a/third_party/nix/scripts/repl.sh b/third_party/nix/scripts/repl.sh deleted file mode 100755 index d068e807903a..000000000000 --- a/third_party/nix/scripts/repl.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/usr/bin/env bash -set -eo pipefail - -# Run `nix repl` using a local store, for use during development. Intended to -# be run from the cmake build directory - -if [ "$#" -gt 0 ] && [ "$1" = "--debug" ]; then - gdb=(gdb --args) - shift 1 -elif [ "$1" = "--rr" ]; then - gdb=(rr record) - shift 1 -else - gdb=() -fi - -make -j 10 -NIX_STORE_DIR=$(pwd)/nix/store \ - NIX_LOG_DIR=$(pwd)/nix/var/log/nix \ - NIX_STATE_DIR=$(pwd)/nix/var/nix \ - XDG_CACHE_HOME=$(pwd)/cache \ - NIX_REMOTE=daemon \ - ${gdb[*]} ./src/nix repl "$@" diff --git a/third_party/nix/scripts/setup_store.sh b/third_party/nix/scripts/setup_store.sh deleted file mode 100755 index ee96c8d3b853..000000000000 --- a/third_party/nix/scripts/setup_store.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/usr/bin/env bash -set -euo pipefail - -# Setup a store for local development rooted at the current directory, and -# compatible with the scripts in this directory (repl.sh, build.sh, eval.sh, -# daemon.sh, etc). Intended to be run from the cmake build directory - -mkdir -p nix/store nix/var/nix nix/var/log/nix -ln -s $(pwd)/src/nix ./nix/build-remote -mkdir -p $(dirname "$(pwd)${SANDBOX_SHELL}") -cp "${SANDBOX_SHELL}" "$(pwd)${SANDBOX_SHELL}" |