about summary refs log tree commit diff
path: root/third_party/nix/scripts
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/nix/scripts')
-rw-r--r--third_party/nix/scripts/install-darwin-multi-user.sh144
-rw-r--r--third_party/nix/scripts/install-multi-user.sh798
-rw-r--r--third_party/nix/scripts/install-nix-from-closure.sh180
-rwxr-xr-xthird_party/nix/scripts/install-systemd-multi-user.sh188
-rw-r--r--third_party/nix/scripts/install.in66
-rw-r--r--third_party/nix/scripts/meson.build74
-rwxr-xr-xthird_party/nix/scripts/nix-http-export.cgi.in51
-rw-r--r--third_party/nix/scripts/nix-profile-daemon.sh.in29
-rw-r--r--third_party/nix/scripts/nix-profile.sh.in39
-rwxr-xr-xthird_party/nix/scripts/nix-reduce-build.in171
10 files changed, 1740 insertions, 0 deletions
diff --git a/third_party/nix/scripts/install-darwin-multi-user.sh b/third_party/nix/scripts/install-darwin-multi-user.sh
new file mode 100644
index 000000000000..49076bd5c03f
--- /dev/null
+++ b/third_party/nix/scripts/install-darwin-multi-user.sh
@@ -0,0 +1,144 @@
+#!/usr/bin/env bash
+
+set -eu
+set -o pipefail
+
+readonly PLIST_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist
+
+dsclattr() {
+    /usr/bin/dscl . -read "$1" \
+        | awk "/$2/ { print \$2 }"
+}
+
+poly_validate_assumptions() {
+    if [ "$(uname -s)" != "Darwin" ]; then
+        failure "This script is for use with macOS!"
+    fi
+}
+
+poly_service_installed_check() {
+    [ -e "$PLIST_DEST" ]
+}
+
+poly_service_uninstall_directions() {
+        cat <<EOF
+$1. Delete $PLIST_DEST
+
+  sudo launchctl unload $PLIST_DEST
+  sudo rm $PLIST_DEST
+
+EOF
+}
+
+poly_service_setup_note() {
+    cat <<EOF
+ - load and start a LaunchDaemon (at $PLIST_DEST) for nix-daemon
+
+EOF
+}
+
+poly_configure_nix_daemon_service() {
+    _sudo "to set up the nix-daemon as a LaunchDaemon" \
+          cp -f "/nix/var/nix/profiles/default$PLIST_DEST" "$PLIST_DEST"
+
+    _sudo "to load the LaunchDaemon plist for nix-daemon" \
+          launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist
+
+    _sudo "to start the nix-daemon" \
+          launchctl start org.nixos.nix-daemon
+
+}
+
+poly_group_exists() {
+    /usr/bin/dscl . -read "/Groups/$1" > /dev/null 2>&1
+}
+
+poly_group_id_get() {
+    dsclattr "/Groups/$1" "PrimaryGroupID"
+}
+
+poly_create_build_group() {
+    _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \
+          /usr/sbin/dseditgroup -o create \
+          -r "Nix build group for nix-daemon" \
+          -i "$NIX_BUILD_GROUP_ID" \
+          "$NIX_BUILD_GROUP_NAME" >&2
+}
+
+poly_user_exists() {
+    /usr/bin/dscl . -read "/Users/$1" > /dev/null 2>&1
+}
+
+poly_user_id_get() {
+    dsclattr "/Users/$1" "UniqueID"
+}
+
+poly_user_hidden_get() {
+    dsclattr "/Users/$1" "IsHidden"
+}
+
+poly_user_hidden_set() {
+    _sudo "in order to make $1 a hidden user" \
+          /usr/bin/dscl . -create "/Users/$1" "IsHidden" "1"
+}
+
+poly_user_home_get() {
+    dsclattr "/Users/$1" "NFSHomeDirectory"
+}
+
+poly_user_home_set() {
+    _sudo "in order to give $1 a safe home directory" \
+          /usr/bin/dscl . -create "/Users/$1" "NFSHomeDirectory" "$2"
+}
+
+poly_user_note_get() {
+    dsclattr "/Users/$1" "RealName"
+}
+
+poly_user_note_set() {
+    _sudo "in order to give $username a useful note" \
+          /usr/bin/dscl . -create "/Users/$1" "RealName" "$2"
+}
+
+poly_user_shell_get() {
+    dsclattr "/Users/$1" "UserShell"
+}
+
+poly_user_shell_set() {
+    _sudo "in order to give $1 a safe home directory" \
+          /usr/bin/dscl . -create "/Users/$1" "UserShell" "$2"
+}
+
+poly_user_in_group_check() {
+    username=$1
+    group=$2
+    dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1
+}
+
+poly_user_in_group_set() {
+    username=$1
+    group=$2
+
+    _sudo "Add $username to the $group group"\
+          /usr/sbin/dseditgroup -o edit -t user \
+          -a "$username" "$group"
+}
+
+poly_user_primary_group_get() {
+    dsclattr "/Users/$1" "PrimaryGroupID"
+}
+
+poly_user_primary_group_set() {
+    _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \
+          /usr/bin/dscl . -create "/Users/$1" "PrimaryGroupID" "$2"
+}
+
+poly_create_build_user() {
+    username=$1
+    uid=$2
+    builder_num=$3
+
+    _sudo "Creating the Nix build user (#$builder_num), $username" \
+          /usr/bin/dscl . create "/Users/$username" \
+          UniqueID "${uid}"
+}
diff --git a/third_party/nix/scripts/install-multi-user.sh b/third_party/nix/scripts/install-multi-user.sh
new file mode 100644
index 000000000000..5233762fa649
--- /dev/null
+++ b/third_party/nix/scripts/install-multi-user.sh
@@ -0,0 +1,798 @@
+#!/usr/bin/env bash
+
+set -eu
+set -o pipefail
+
+# Sourced from:
+# - https://github.com/LnL7/nix-darwin/blob/8c29d0985d74b4a990238497c47a2542a5616b3c/bootstrap.sh
+# - https://gist.github.com/expipiplus1/e571ce88c608a1e83547c918591b149f/ac504c6c1b96e65505fbda437a28ce563408ecb0
+# - https://github.com/NixOS/nixos-org-configurations/blob/a122f418797713d519aadf02e677fce0dc1cb446/delft/scripts/nix-mac-installer.sh
+# - https://github.com/matthewbauer/macNixOS/blob/f6045394f9153edea417be90c216788e754feaba/install-macNixOS.sh
+# - https://gist.github.com/LnL7/9717bd6cdcb30b086fd7f2093e5f8494/86b26f852ce563e973acd30f796a9a416248c34a
+#
+# however tracking which bits came from which would be impossible.
+
+readonly ESC='\033[0m'
+readonly BOLD='\033[1m'
+readonly BLUE='\033[34m'
+readonly BLUE_UL='\033[4;34m'
+readonly GREEN='\033[32m'
+readonly GREEN_UL='\033[4;32m'
+readonly RED='\033[31m'
+
+readonly NIX_USER_COUNT="32"
+readonly NIX_BUILD_GROUP_ID="30000"
+readonly NIX_BUILD_GROUP_NAME="nixbld"
+readonly NIX_FIRST_BUILD_UID="30001"
+# Please don't change this. We don't support it, because the
+# default shell profile that comes with Nix doesn't support it.
+readonly NIX_ROOT="/nix"
+
+readonly PROFILE_TARGETS=("/etc/bashrc" "/etc/profile.d/nix.sh" "/etc/zshrc")
+readonly PROFILE_BACKUP_SUFFIX=".backup-before-nix"
+readonly PROFILE_NIX_FILE="$NIX_ROOT/var/nix/profiles/default/etc/profile.d/nix-daemon.sh"
+
+readonly NIX_INSTALLED_NIX="@nix@"
+readonly NIX_INSTALLED_CACERT="@cacert@"
+readonly EXTRACTED_NIX_PATH="$(dirname "$0")"
+
+readonly ROOT_HOME=$(echo ~root)
+
+if [ -t 0 ]; then
+    readonly IS_HEADLESS='no'
+else
+    readonly IS_HEADLESS='yes'
+fi
+
+headless() {
+    if [ "$IS_HEADLESS" = "yes" ]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+contactme() {
+    echo "We'd love to help if you need it."
+    echo ""
+    echo "If you can, open an issue at https://github.com/nixos/nix/issues"
+    echo ""
+    echo "Or feel free to contact the team,"
+    echo " - on IRC #nixos on irc.freenode.net"
+    echo " - on twitter @nixos_org"
+}
+
+uninstall_directions() {
+    subheader "Uninstalling nix:"
+    local step=0
+
+    if poly_service_installed_check; then
+        step=$((step + 1))
+        poly_service_uninstall_directions "$step"
+    fi
+
+    for profile_target in "${PROFILE_TARGETS[@]}"; do
+        if [ -e "$profile_target" ] && [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
+            step=$((step + 1))
+            cat <<EOF
+$step. Restore $profile_target$PROFILE_BACKUP_SUFFIX back to $profile_target
+
+  sudo mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target
+
+(after this one, you may need to re-open any terminals that were
+opened while it existed.)
+
+EOF
+        fi
+    done
+
+    step=$((step + 1))
+    cat <<EOF
+$step. Delete the files Nix added to your system:
+
+  sudo rm -rf /etc/nix $NIX_ROOT $ROOT_HOME/.nix-profile $ROOT_HOME/.nix-defexpr $ROOT_HOME/.nix-channels $HOME/.nix-profile $HOME/.nix-defexpr $HOME/.nix-channels
+
+and that is it.
+
+EOF
+
+}
+
+nix_user_for_core() {
+    printf "nixbld%d" "$1"
+}
+
+nix_uid_for_core() {
+    echo $((NIX_FIRST_BUILD_UID + $1 - 1))
+}
+
+_textout() {
+    echo -en "$1"
+    shift
+    if [ "$*" = "" ]; then
+        cat
+    else
+        echo "$@"
+    fi
+    echo -en "$ESC"
+}
+
+header() {
+    follow="---------------------------------------------------------"
+    header=$(echo "---- $* $follow$follow$follow" | head -c 80)
+    echo ""
+    _textout "$BLUE" "$header"
+}
+
+warningheader() {
+    follow="---------------------------------------------------------"
+    header=$(echo "---- $* $follow$follow$follow" | head -c 80)
+    echo ""
+    _textout "$RED" "$header"
+}
+
+subheader() {
+    echo ""
+    _textout "$BLUE_UL" "$*"
+}
+
+row() {
+    printf "$BOLD%s$ESC:\\t%s\\n" "$1" "$2"
+}
+
+task() {
+    echo ""
+    ok "~~> $1"
+}
+
+bold() {
+    echo "$BOLD$*$ESC"
+}
+
+ok() {
+    _textout "$GREEN" "$@"
+}
+
+warning() {
+    warningheader "warning!"
+    cat
+    echo ""
+}
+
+failure() {
+    header "oh no!"
+    _textout "$RED" "$@"
+    echo ""
+    _textout "$RED" "$(contactme)"
+    trap finish_cleanup EXIT
+    exit 1
+}
+
+ui_confirm() {
+    _textout "$GREEN$GREEN_UL" "$1"
+
+    if headless; then
+        echo "No TTY, assuming you would say yes :)"
+        return 0
+    fi
+
+    local prompt="[y/n] "
+    echo -n "$prompt"
+    while read -r y; do
+        if [ "$y" = "y" ]; then
+            echo ""
+            return 0
+        elif [ "$y" = "n" ]; then
+            echo ""
+            return 1
+        else
+            _textout "$RED" "Sorry, I didn't understand. I can only understand answers of y or n"
+            echo -n "$prompt"
+        fi
+    done
+    echo ""
+    return 1
+}
+
+__sudo() {
+    local expl="$1"
+    local cmd="$2"
+    shift
+    header "sudo execution"
+
+    echo "I am executing:"
+    echo ""
+    printf "    $ sudo %s\\n" "$cmd"
+    echo ""
+    echo "$expl"
+    echo ""
+
+    return 0
+}
+
+_sudo() {
+    local expl="$1"
+    shift
+    if ! headless; then
+        __sudo "$expl" "$*"
+    fi
+    sudo "$@"
+}
+
+
+readonly SCRATCH=$(mktemp -d -t tmp.XXXXXXXXXX)
+function finish_cleanup {
+    rm -rf "$SCRATCH"
+}
+
+function finish_fail {
+    finish_cleanup
+
+    failure <<EOF
+Jeeze, something went wrong. If you can take all the output and open
+an issue, we'd love to fix the problem so nobody else has this issue.
+
+:(
+EOF
+}
+trap finish_fail EXIT
+
+channel_update_failed=0
+function finish_success {
+    finish_cleanup
+
+    ok "Alright! We're done!"
+    if [ "x$channel_update_failed" = x1 ]; then
+        echo ""
+        echo "But fetching the nixpkgs channel failed. (Are you offline?)"
+        echo "To try again later, run \"sudo -i nix-channel --update nixpkgs\"."
+    fi
+    cat <<EOF
+
+Before Nix will work in your existing shells, you'll need to close
+them and open them again. Other than that, you should be ready to go.
+
+Try it! Open a new terminal, and type:
+
+  $ nix-shell -p nix-info --run "nix-info -m"
+
+Thank you for using this installer. If you have any feedback, don't
+hesitate:
+
+$(contactme)
+EOF
+}
+
+
+validate_starting_assumptions() {
+    poly_validate_assumptions
+
+    if [ $EUID -eq 0 ]; then
+        failure <<EOF
+Please do not run this script with root privileges. We will call sudo
+when we need to.
+EOF
+    fi
+
+    if type nix-env 2> /dev/null >&2; then
+        failure <<EOF
+Nix already appears to be installed, and this tool assumes it is
+_not_ yet installed.
+
+$(uninstall_directions)
+EOF
+    fi
+
+    if [ "${NIX_REMOTE:-}" != "" ]; then
+        failure <<EOF
+For some reason, \$NIX_REMOTE is set. It really should not be set
+before this installer runs, and it hints that Nix is currently
+installed. Please delete the old Nix installation and start again.
+
+Note: You might need to close your shell window and open a new shell
+to clear the variable.
+EOF
+    fi
+
+    if echo "${SSL_CERT_FILE:-}" | grep -qE "(nix/var/nix|nix-profile)"; then
+        failure <<EOF
+It looks like \$SSL_CERT_FILE is set to a path that used to be part of
+the old Nix installation. Please unset that variable and try again:
+
+  $ unset SSL_CERT_FILE
+
+EOF
+    fi
+
+    for file in ~/.bash_profile ~/.bash_login ~/.profile ~/.zshenv ~/.zprofile ~/.zshrc ~/.zlogin; do
+        if [ -f "$file" ]; then
+            if grep -l "^[^#].*.nix-profile" "$file"; then
+                failure <<EOF
+I found a reference to a ".nix-profile" in $file.
+This has a high chance of breaking a new nix installation. It was most
+likely put there by a previous Nix installer.
+
+Please remove this reference and try running this again. You should
+also look for similar references in:
+
+ - ~/.bash_profile
+ - ~/.bash_login
+ - ~/.profile
+
+or other shell init files that you may have.
+
+$(uninstall_directions)
+EOF
+            fi
+        fi
+    done
+
+    if [ -d /nix/store ] || [ -d /nix/var ]; then
+        failure <<EOF
+There are some relics of a previous installation of Nix at /nix, and
+this scripts assumes Nix is _not_ yet installed. Please delete the old
+Nix installation and start again.
+
+$(uninstall_directions)
+EOF
+    fi
+
+    if [ -d /etc/nix ]; then
+        failure <<EOF
+There are some relics of a previous installation of Nix at /etc/nix, and
+this scripts assumes Nix is _not_ yet installed. Please delete the old
+Nix installation and start again.
+
+$(uninstall_directions)
+EOF
+    fi
+
+    for profile_target in "${PROFILE_TARGETS[@]}"; do
+        if [ -e "$profile_target$PROFILE_BACKUP_SUFFIX" ]; then
+        failure <<EOF
+When this script runs, it backs up the current $profile_target to
+$profile_target$PROFILE_BACKUP_SUFFIX. This backup file already exists, though.
+
+Please follow these instructions to clean up the old backup file:
+
+1. Copy $profile_target and $profile_target$PROFILE_BACKUP_SUFFIX to another place, just
+in case.
+
+2. Take care to make sure that $profile_target$PROFILE_BACKUP_SUFFIX doesn't look like
+it has anything nix-related in it. If it does, something is probably
+quite wrong. Please open an issue or get in touch immediately.
+
+3. Take care to make sure that $profile_target doesn't look like it has
+anything nix-related in it. If it does, and $profile_target _did not_,
+run:
+
+  $ /usr/bin/sudo /bin/mv $profile_target$PROFILE_BACKUP_SUFFIX $profile_target
+
+and try again.
+EOF
+        fi
+
+        if [ -e "$profile_target" ] && grep -qi "nix" "$profile_target"; then
+            failure <<EOF
+It looks like $profile_target already has some Nix configuration in
+there. There should be no reason to run this again. If you're having
+trouble, please open an issue.
+EOF
+        fi
+    done
+
+    danger_paths=("$ROOT_HOME/.nix-defexpr" "$ROOT_HOME/.nix-channels" "$ROOT_HOME/.nix-profile")
+    for danger_path in "${danger_paths[@]}"; do
+        if _sudo "making sure that $danger_path doesn't exist" \
+           test -e "$danger_path"; then
+            failure <<EOF
+I found a file at $danger_path, which is a relic of a previous
+installation. You must first delete this file before continuing.
+
+$(uninstall_directions)
+EOF
+        fi
+    done
+}
+
+setup_report() {
+    header "Nix config report"
+    row "        Temp Dir" "$SCRATCH"
+    row "        Nix Root" "$NIX_ROOT"
+    row "     Build Users" "$NIX_USER_COUNT"
+    row "  Build Group ID" "$NIX_BUILD_GROUP_ID"
+    row "Build Group Name" "$NIX_BUILD_GROUP_NAME"
+    if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" != "" ]; then
+        row "Preexisting Install" "Allowed"
+    fi
+
+    subheader "build users:"
+
+    row "    Username" "UID"
+    for i in $(seq 1 "$NIX_USER_COUNT"); do
+        row "     $(nix_user_for_core "$i")" "$(nix_uid_for_core "$i")"
+    done
+    echo ""
+}
+
+create_build_group() {
+    local primary_group_id
+
+    task "Setting up the build group $NIX_BUILD_GROUP_NAME"
+    if ! poly_group_exists "$NIX_BUILD_GROUP_NAME"; then
+        poly_create_build_group
+        row "            Created" "Yes"
+    else
+        primary_group_id=$(poly_group_id_get "$NIX_BUILD_GROUP_NAME")
+        if [ "$primary_group_id" -ne "$NIX_BUILD_GROUP_ID" ]; then
+            failure <<EOF
+It seems the build group $NIX_BUILD_GROUP_NAME already exists, but
+with the UID $primary_group_id. This script can't really handle
+that right now, so I'm going to give up.
+
+You can fix this by editing this script and changing the
+NIX_BUILD_GROUP_ID variable near the top to from $NIX_BUILD_GROUP_ID
+to $primary_group_id and re-run.
+EOF
+        else
+            row "            Exists" "Yes"
+        fi
+    fi
+}
+
+create_build_user_for_core() {
+    local coreid
+    local username
+    local uid
+
+    coreid="$1"
+    username=$(nix_user_for_core "$coreid")
+    uid=$(nix_uid_for_core "$coreid")
+
+    task "Setting up the build user $username"
+
+    if ! poly_user_exists "$username"; then
+        poly_create_build_user "$username" "$uid" "$coreid"
+        row "           Created" "Yes"
+    else
+        actual_uid=$(poly_user_id_get "$username")
+        if [ "$actual_uid" != "$uid" ]; then
+            failure <<EOF
+It seems the build user $username already exists, but with the UID
+with the UID '$actual_uid'. This script can't really handle that right
+now, so I'm going to give up.
+
+If you already created the users and you know they start from
+$actual_uid and go up from there, you can edit this script and change
+NIX_FIRST_BUILD_UID near the top of the file to $actual_uid and try
+again.
+EOF
+        else
+            row "            Exists" "Yes"
+        fi
+    fi
+
+    if [ "$(poly_user_hidden_get "$username")" = "1" ]; then
+        row "            Hidden" "Yes"
+    else
+        poly_user_hidden_set "$username"
+        row "            Hidden" "Yes"
+    fi
+
+    if [ "$(poly_user_home_get "$username")" = "/var/empty" ]; then
+        row "    Home Directory" "/var/empty"
+    else
+        poly_user_home_set "$username" "/var/empty"
+        row "    Home Directory" "/var/empty"
+    fi
+
+    # We use grep instead of an equality check because it is difficult
+    # to extract _just_ the user's note, instead it is prefixed with
+    # some plist junk. This was causing the user note to always be set,
+    # even if there was no reason for it.
+    if ! poly_user_note_get "$username" | grep -q "Nix build user $coreid"; then
+        row "              Note" "Nix build user $coreid"
+    else
+        poly_user_note_set "$username" "Nix build user $coreid"
+        row "              Note" "Nix build user $coreid"
+    fi
+
+    if [ "$(poly_user_shell_get "$username")" = "/sbin/nologin" ]; then
+        row "   Logins Disabled" "Yes"
+    else
+        poly_user_shell_set "$username" "/sbin/nologin"
+        row "   Logins Disabled" "Yes"
+    fi
+
+    if poly_user_in_group_check "$username" "$NIX_BUILD_GROUP_NAME"; then
+        row "  Member of $NIX_BUILD_GROUP_NAME" "Yes"
+    else
+        poly_user_in_group_set "$username" "$NIX_BUILD_GROUP_NAME"
+        row "  Member of $NIX_BUILD_GROUP_NAME" "Yes"
+    fi
+
+    if [ "$(poly_user_primary_group_get "$username")" = "$NIX_BUILD_GROUP_ID" ]; then
+        row "    PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
+    else
+        poly_user_primary_group_set "$username" "$NIX_BUILD_GROUP_ID"
+        row "    PrimaryGroupID" "$NIX_BUILD_GROUP_ID"
+    fi
+}
+
+create_build_users() {
+    for i in $(seq 1 "$NIX_USER_COUNT"); do
+        create_build_user_for_core "$i"
+    done
+}
+
+create_directories() {
+    # FIXME: remove all of this because it duplicates LocalStore::LocalStore().
+
+    _sudo "to make the basic directory structure of Nix (part 1)" \
+          mkdir -pv -m 0755 /nix /nix/var /nix/var/log /nix/var/log/nix /nix/var/log/nix/drvs /nix/var/nix{,/db,/gcroots,/profiles,/temproots,/userpool} /nix/var/nix/{gcroots,profiles}/per-user
+
+    _sudo "to make the basic directory structure of Nix (part 2)" \
+          mkdir -pv -m 1775 /nix/store
+
+    _sudo "to make the basic directory structure of Nix (part 3)" \
+          chgrp "$NIX_BUILD_GROUP_NAME" /nix/store
+
+    _sudo "to place the default nix daemon configuration (part 1)" \
+          mkdir -pv -m 0555 /etc/nix
+}
+
+place_channel_configuration() {
+    echo "https://nixos.org/channels/nixpkgs-unstable nixpkgs" > "$SCRATCH/.nix-channels"
+    _sudo "to set up the default system channel (part 1)" \
+          install -m 0664 "$SCRATCH/.nix-channels" "$ROOT_HOME/.nix-channels"
+}
+
+welcome_to_nix() {
+    ok "Welcome to the Multi-User Nix Installation"
+
+    cat <<EOF
+
+This installation tool will set up your computer with the Nix package
+manager. This will happen in a few stages:
+
+1. Make sure your computer doesn't already have Nix. If it does, I
+   will show you instructions on how to clean up your old one.
+
+2. Show you what we are going to install and where. Then we will ask
+   if you are ready to continue.
+
+3. Create the system users and groups that the Nix daemon uses to run
+   builds.
+
+4. Perform the basic installation of the Nix files daemon.
+
+5. Configure your shell to import special Nix Profile files, so you
+   can use Nix.
+
+6. Start the Nix daemon.
+
+EOF
+
+    if ui_confirm "Would you like to see a more detailed list of what we will do?"; then
+        cat <<EOF
+
+We will:
+
+ - make sure your computer doesn't already have Nix files
+   (if it does, I will tell you how to clean them up.)
+ - create local users (see the list above for the users we'll make)
+ - create a local group ($NIX_BUILD_GROUP_NAME)
+ - install Nix in to $NIX_ROOT
+ - create a configuration file in /etc/nix
+ - set up the "default profile" by creating some Nix-related files in
+   $ROOT_HOME
+EOF
+        for profile_target in "${PROFILE_TARGETS[@]}"; do
+            if [ -e "$profile_target" ]; then
+                cat <<EOF
+ - back up $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX
+ - update $profile_target to include some Nix configuration
+EOF
+            fi
+        done
+        poly_service_setup_note
+        if ! ui_confirm "Ready to continue?"; then
+            failure <<EOF
+Okay, maybe you would like to talk to the team.
+EOF
+        fi
+    fi
+}
+
+chat_about_sudo() {
+    header "let's talk about sudo"
+
+    if headless; then
+        cat <<EOF
+This script is going to call sudo a lot. Normally, it would show you
+exactly what commands it is running and why. However, the script is
+run in a headless fashion, like this:
+
+  $ curl https://nixos.org/nix/install | sh
+
+or maybe in a CI pipeline. Because of that, we're going to skip the
+verbose output in the interest of brevity.
+
+If you would like to
+see the output, try like this:
+
+  $ curl -o install-nix https://nixos.org/nix/install
+  $ sh ./install-nix
+
+EOF
+        return 0
+    fi
+
+    cat <<EOF
+This script is going to call sudo a lot. Every time we do, it'll
+output exactly what it'll do, and why.
+
+Just like this:
+EOF
+
+    __sudo "to demonstrate how our sudo prompts look" \
+           echo "this is a sudo prompt"
+
+    cat <<EOF
+
+This might look scary, but everything can be undone by running just a
+few commands. We used to ask you to confirm each time sudo ran, but it
+was too many times. Instead, I'll just ask you this one time:
+
+EOF
+    if ui_confirm "Can we use sudo?"; then
+        ok "Yay! Thanks! Let's get going!"
+    else
+        failure <<EOF
+That is okay, but we can't install.
+EOF
+    fi
+}
+
+install_from_extracted_nix() {
+    (
+        cd "$EXTRACTED_NIX_PATH"
+
+        _sudo "to copy the basic Nix files to the new store at $NIX_ROOT/store" \
+              rsync -rlpt ./store/* "$NIX_ROOT/store/"
+
+        if [ -d "$NIX_INSTALLED_NIX" ]; then
+            echo "      Alright! We have our first nix at $NIX_INSTALLED_NIX"
+        else
+            failure <<EOF
+Something went wrong, and I didn't find Nix installed at
+$NIX_INSTALLED_NIX.
+EOF
+        fi
+
+        cat ./.reginfo \
+            | _sudo "to load data for the first time in to the Nix Database" \
+                   "$NIX_INSTALLED_NIX/bin/nix-store" --load-db
+
+        echo "      Just finished getting the nix database ready."
+    )
+}
+
+shell_source_lines() {
+    cat <<EOF
+
+# Nix
+if [ -e '$PROFILE_NIX_FILE' ]; then
+  . '$PROFILE_NIX_FILE'
+fi
+# End Nix
+
+EOF
+}
+
+configure_shell_profile() {
+    # If there is an /etc/profile.d directory, we want to ensure there
+    # is a nix.sh within it, so we can use the following loop to add
+    # the source lines to it. Note that I'm _not_ adding the source
+    # lines here, because we want to be using the regular machinery.
+    #
+    # If we go around that machinery, it becomes more complicated and
+    # adds complications to the uninstall instruction generator and
+    # old instruction sniffer as well.
+    if [ -d /etc/profile.d ]; then
+        _sudo "create a stub /etc/profile.d/nix.sh which will be updated" \
+              touch /etc/profile.d/nix.sh
+    fi
+
+    for profile_target in "${PROFILE_TARGETS[@]}"; do
+        if [ -e "$profile_target" ]; then
+            _sudo "to back up your current $profile_target to $profile_target$PROFILE_BACKUP_SUFFIX" \
+                  cp "$profile_target" "$profile_target$PROFILE_BACKUP_SUFFIX"
+
+            shell_source_lines \
+                | _sudo "extend your $profile_target with nix-daemon settings" \
+                        tee -a "$profile_target"
+        fi
+    done
+}
+
+setup_default_profile() {
+    _sudo "to installing a bootstrapping Nix in to the default Profile" \
+          HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_NIX"
+
+    if [ -z "${NIX_SSL_CERT_FILE:-}" ] || ! [ -f "${NIX_SSL_CERT_FILE:-}" ]; then
+        _sudo "to installing a bootstrapping SSL certificate just for Nix in to the default Profile" \
+              HOME="$ROOT_HOME" "$NIX_INSTALLED_NIX/bin/nix-env" -i "$NIX_INSTALLED_CACERT"
+        export NIX_SSL_CERT_FILE=/nix/var/nix/profiles/default/etc/ssl/certs/ca-bundle.crt
+    fi
+
+    # Have to explicitly pass NIX_SSL_CERT_FILE as part of the sudo call,
+    # otherwise it will be lost in environments where sudo doesn't pass
+    # all the environment variables by default.
+    _sudo "to update the default channel in the default profile" \
+          HOME="$ROOT_HOME" NIX_SSL_CERT_FILE="$NIX_SSL_CERT_FILE" "$NIX_INSTALLED_NIX/bin/nix-channel" --update nixpkgs \
+          || channel_update_failed=1
+
+}
+
+
+place_nix_configuration() {
+    cat <<EOF > "$SCRATCH/nix.conf"
+build-users-group = $NIX_BUILD_GROUP_NAME
+EOF
+    _sudo "to place the default nix daemon configuration (part 2)" \
+          install -m 0664 "$SCRATCH/nix.conf" /etc/nix/nix.conf
+}
+
+main() {
+    if [ "$(uname -s)" = "Darwin" ]; then
+        # shellcheck source=./install-darwin-multi-user.sh
+        . "$EXTRACTED_NIX_PATH/install-darwin-multi-user.sh"
+    elif [ "$(uname -s)" = "Linux" ]; then
+        if [ -e /run/systemd/system ]; then
+            # shellcheck source=./install-systemd-multi-user.sh
+            . "$EXTRACTED_NIX_PATH/install-systemd-multi-user.sh"
+        else
+            failure "Sorry, the multi-user installation requires systemd on Linux (detected using /run/systemd/system)"
+        fi
+    else
+        failure "Sorry, I don't know what to do on $(uname)"
+    fi
+
+    welcome_to_nix
+    chat_about_sudo
+
+    if [ "${ALLOW_PREEXISTING_INSTALLATION:-}" = "" ]; then
+        validate_starting_assumptions
+    fi
+
+    setup_report
+
+    if ! ui_confirm "Ready to continue?"; then
+        ok "Alright, no changes have been made :)"
+        contactme
+        trap finish_cleanup EXIT
+        exit 1
+    fi
+
+    create_build_group
+    create_build_users
+    create_directories
+    place_channel_configuration
+    install_from_extracted_nix
+
+    configure_shell_profile
+
+    set +eu
+    . /etc/profile
+    set -eu
+
+    setup_default_profile
+    place_nix_configuration
+    poly_configure_nix_daemon_service
+
+    trap finish_success EXIT
+}
+
+
+main
diff --git a/third_party/nix/scripts/install-nix-from-closure.sh b/third_party/nix/scripts/install-nix-from-closure.sh
new file mode 100644
index 000000000000..3f15818547ab
--- /dev/null
+++ b/third_party/nix/scripts/install-nix-from-closure.sh
@@ -0,0 +1,180 @@
+#!/bin/sh
+
+set -e
+
+dest="/nix"
+self="$(dirname "$0")"
+nix="@nix@"
+cacert="@cacert@"
+
+
+if ! [ -e "$self/.reginfo" ]; then
+    echo "$0: incomplete installer (.reginfo is missing)" >&2
+fi
+
+if [ -z "$USER" ] && ! USER=$(id -u -n); then
+    echo "$0: \$USER is not set" >&2
+    exit 1
+fi
+
+if [ -z "$HOME" ]; then
+    echo "$0: \$HOME is not set" >&2
+    exit 1
+fi
+
+# macOS support for 10.12.6 or higher
+if [ "$(uname -s)" = "Darwin" ]; then
+    macos_major=$(sw_vers -productVersion | cut -d '.' -f 2)
+    macos_minor=$(sw_vers -productVersion | cut -d '.' -f 3)
+    if [ "$macos_major" -lt 12 ] || { [ "$macos_major" -eq 12 ] && [ "$macos_minor" -lt 6 ]; }; then
+        echo "$0: macOS $(sw_vers -productVersion) is not supported, upgrade to 10.12.6 or higher"
+        exit 1
+    fi
+fi
+
+# Determine if we could use the multi-user installer or not
+if [ "$(uname -s)" = "Darwin" ]; then
+    echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2
+elif [ "$(uname -s)" = "Linux" ] && [ -e /run/systemd/system ]; then
+    echo "Note: a multi-user installation is possible. See https://nixos.org/nix/manual/#sect-multi-user-installation" >&2
+fi
+
+INSTALL_MODE=no-daemon
+# Trivially handle the --daemon / --no-daemon options
+if [ "x${1:-}" = "x--no-daemon" ]; then
+    INSTALL_MODE=no-daemon
+elif [ "x${1:-}" = "x--daemon" ]; then
+    INSTALL_MODE=daemon
+elif [ "x${1:-}" != "x" ]; then
+    (
+        echo "Nix Installer [--daemon|--no-daemon]"
+
+        echo "Choose installation method."
+        echo ""
+        echo " --daemon:    Installs and configures a background daemon that manages the store,"
+        echo "              providing multi-user support and better isolation for local builds."
+        echo "              Both for security and reproducibility, this method is recommended if"
+        echo "              supported on your platform."
+        echo "              See https://nixos.org/nix/manual/#sect-multi-user-installation"
+        echo ""
+        echo " --no-daemon: Simple, single-user installation that does not require root and is"
+        echo "              trivial to uninstall."
+        echo "              (default)"
+        echo ""
+    ) >&2
+    exit
+fi
+
+if [ "$INSTALL_MODE" = "daemon" ]; then
+    printf '\e[1;31mSwitching to the Daemon-based Installer\e[0m\n'
+    exec "$self/install-multi-user"
+    exit 0
+fi
+
+if [ "$(id -u)" -eq 0 ]; then
+    printf '\e[1;31mwarning: installing Nix as root is not supported by this script!\e[0m\n'
+fi
+
+echo "performing a single-user installation of Nix..." >&2
+
+if ! [ -e $dest ]; then
+    cmd="mkdir -m 0755 $dest && chown $USER $dest"
+    echo "directory $dest does not exist; creating it by running '$cmd' using sudo" >&2
+    if ! sudo sh -c "$cmd"; then
+        echo "$0: please manually run '$cmd' as root to create $dest" >&2
+        exit 1
+    fi
+fi
+
+if ! [ -w $dest ]; then
+    echo "$0: directory $dest exists, but is not writable by you. This could indicate that another user has already performed a single-user installation of Nix on this system. If you wish to enable multi-user support see http://nixos.org/nix/manual/#ssec-multi-user. If you wish to continue with a single-user install for $USER please run 'chown -R $USER $dest' as root." >&2
+    exit 1
+fi
+
+mkdir -p $dest/store
+
+printf "copying Nix to %s..." "${dest}/store" >&2
+
+for i in $(cd "$self/store" >/dev/null && echo ./*); do
+    printf "." >&2
+    i_tmp="$dest/store/$i.$$"
+    if [ -e "$i_tmp" ]; then
+        rm -rf "$i_tmp"
+    fi
+    if ! [ -e "$dest/store/$i" ]; then
+        cp -Rp "$self/store/$i" "$i_tmp"
+        chmod -R a-w "$i_tmp"
+        chmod +w "$i_tmp"
+        mv "$i_tmp" "$dest/store/$i"
+        chmod -w "$dest/store/$i"
+    fi
+done
+echo "" >&2
+
+if ! "$nix/bin/nix-store" --load-db < "$self/.reginfo"; then
+    echo "$0: unable to register valid paths" >&2
+    exit 1
+fi
+
+. "$nix/etc/profile.d/nix.sh"
+
+if ! "$nix/bin/nix-env" -i "$nix"; then
+    echo "$0: unable to install Nix into your default profile" >&2
+    exit 1
+fi
+
+# Install an SSL certificate bundle.
+if [ -z "$NIX_SSL_CERT_FILE" ] || ! [ -f "$NIX_SSL_CERT_FILE" ]; then
+    $nix/bin/nix-env -i "$cacert"
+    export NIX_SSL_CERT_FILE="$HOME/.nix-profile/etc/ssl/certs/ca-bundle.crt"
+fi
+
+# Subscribe the user to the Nixpkgs channel and fetch it.
+if ! $nix/bin/nix-channel --list | grep -q "^nixpkgs "; then
+    $nix/bin/nix-channel --add https://nixos.org/channels/nixpkgs-unstable
+fi
+if [ -z "$_NIX_INSTALLER_TEST" ]; then
+    if ! $nix/bin/nix-channel --update nixpkgs; then
+        echo "Fetching the nixpkgs channel failed. (Are you offline?)"
+        echo "To try again later, run \"nix-channel --update nixpkgs\"."
+    fi
+fi
+
+added=
+p=$HOME/.nix-profile/etc/profile.d/nix.sh
+if [ -z "$NIX_INSTALLER_NO_MODIFY_PROFILE" ]; then
+    # Make the shell source nix.sh during login.
+    for i in .bash_profile .bash_login .profile; do
+        fn="$HOME/$i"
+        if [ -w "$fn" ]; then
+            if ! grep -q "$p" "$fn"; then
+                echo "modifying $fn..." >&2
+                echo "if [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
+            fi
+            added=1
+            break
+        fi
+    done
+fi
+
+if [ -z "$added" ]; then
+    cat >&2 <<EOF
+
+Installation finished!  To ensure that the necessary environment
+variables are set, please add the line
+
+  . $p
+
+to your shell profile (e.g. ~/.profile).
+EOF
+else
+    cat >&2 <<EOF
+
+Installation finished!  To ensure that the necessary environment
+variables are set, either log in again, or type
+
+  . $p
+
+in your shell.
+EOF
+fi
diff --git a/third_party/nix/scripts/install-systemd-multi-user.sh b/third_party/nix/scripts/install-systemd-multi-user.sh
new file mode 100755
index 000000000000..bef3ac4f991f
--- /dev/null
+++ b/third_party/nix/scripts/install-systemd-multi-user.sh
@@ -0,0 +1,188 @@
+#!/usr/bin/env bash
+
+set -eu
+set -o pipefail
+
+readonly SERVICE_SRC=/lib/systemd/system/nix-daemon.service
+readonly SERVICE_DEST=/etc/systemd/system/nix-daemon.service
+
+readonly SOCKET_SRC=/lib/systemd/system/nix-daemon.socket
+readonly SOCKET_DEST=/etc/systemd/system/nix-daemon.socket
+
+
+# Path for the systemd override unit file to contain the proxy settings
+readonly SERVICE_OVERRIDE=${SERVICE_DEST}.d/override.conf
+
+create_systemd_override() {
+     header "Configuring proxy for the nix-daemon service"
+    _sudo "create directory for systemd unit override" mkdir -p "$(dirname $SERVICE_OVERRIDE)"
+    cat <<EOF | _sudo "create systemd unit override" tee "$SERVICE_OVERRIDE"
+[Service]
+$1
+EOF
+}
+
+# Gather all non-empty proxy environment variables into a string
+create_systemd_proxy_env() {
+    vars="http_proxy https_proxy ftp_proxy no_proxy HTTP_PROXY HTTPS_PROXY FTP_PROXY NO_PROXY"
+    for v in $vars; do
+        if [ "x${!v:-}" != "x" ]; then
+            echo "Environment=${v}=${!v}"
+        fi
+    done
+}
+
+handle_network_proxy() {
+    # Create a systemd unit override with proxy environment variables
+    # if any proxy environment variables are not empty.
+    PROXY_ENV_STRING=$(create_systemd_proxy_env)
+    if [ -n "${PROXY_ENV_STRING}" ]; then
+        create_systemd_override "${PROXY_ENV_STRING}"
+    fi
+}
+
+poly_validate_assumptions() {
+    if [ "$(uname -s)" != "Linux" ]; then
+        failure "This script is for use with Linux!"
+    fi
+}
+
+poly_service_installed_check() {
+    [ "$(systemctl is-enabled nix-daemon.service)" = "linked" ] \
+        || [ "$(systemctl is-enabled nix-daemon.socket)" = "enabled" ]
+}
+
+poly_service_uninstall_directions() {
+        cat <<EOF
+$1. Delete the systemd service and socket units
+
+  sudo systemctl stop nix-daemon.socket
+  sudo systemctl stop nix-daemon.service
+  sudo systemctl disable nix-daemon.socket
+  sudo systemctl disable nix-daemon.service
+  sudo systemctl daemon-reload
+EOF
+}
+
+poly_service_setup_note() {
+    cat <<EOF
+ - load and start a service (at $SERVICE_DEST
+   and $SOCKET_DEST) for nix-daemon
+
+EOF
+}
+
+poly_configure_nix_daemon_service() {
+    _sudo "to set up the nix-daemon service" \
+          systemctl link "/nix/var/nix/profiles/default$SERVICE_SRC"
+
+    _sudo "to set up the nix-daemon socket service" \
+          systemctl enable "/nix/var/nix/profiles/default$SOCKET_SRC"
+
+    handle_network_proxy
+
+    _sudo "to load the systemd unit for nix-daemon" \
+          systemctl daemon-reload
+
+    _sudo "to start the nix-daemon.socket" \
+          systemctl start nix-daemon.socket
+
+    _sudo "to start the nix-daemon.service" \
+          systemctl start nix-daemon.service
+
+}
+
+poly_group_exists() {
+    getent group "$1" > /dev/null 2>&1
+}
+
+poly_group_id_get() {
+    getent group "$1" | cut -d: -f3
+}
+
+poly_create_build_group() {
+    _sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \
+          groupadd -g "$NIX_BUILD_GROUP_ID" --system \
+          "$NIX_BUILD_GROUP_NAME" >&2
+}
+
+poly_user_exists() {
+    getent passwd "$1" > /dev/null 2>&1
+}
+
+poly_user_id_get() {
+    getent passwd "$1" | cut -d: -f3
+}
+
+poly_user_hidden_get() {
+    echo "1"
+}
+
+poly_user_hidden_set() {
+    true
+}
+
+poly_user_home_get() {
+    getent passwd "$1" | cut -d: -f6
+}
+
+poly_user_home_set() {
+    _sudo "in order to give $1 a safe home directory" \
+          usermod --home "$2" "$1"
+}
+
+poly_user_note_get() {
+    getent passwd "$1" | cut -d: -f5
+}
+
+poly_user_note_set() {
+    _sudo "in order to give $1 a useful comment" \
+          usermod --comment "$2" "$1"
+}
+
+poly_user_shell_get() {
+    getent passwd "$1" | cut -d: -f7
+}
+
+poly_user_shell_set() {
+    _sudo "in order to prevent $1 from logging in" \
+          usermod --shell "$2" "$1"
+}
+
+poly_user_in_group_check() {
+    groups "$1" | grep -q "$2" > /dev/null 2>&1
+}
+
+poly_user_in_group_set() {
+    _sudo "Add $1 to the $2 group"\
+          usermod --append --groups "$2" "$1"
+}
+
+poly_user_primary_group_get() {
+    getent passwd "$1" | cut -d: -f4
+}
+
+poly_user_primary_group_set() {
+    _sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \
+          usermod --gid "$2" "$1"
+
+}
+
+poly_create_build_user() {
+    username=$1
+    uid=$2
+    builder_num=$3
+
+    _sudo "Creating the Nix build user, $username" \
+          useradd \
+          --home-dir /var/empty \
+          --comment "Nix build user $builder_num" \
+          --gid "$NIX_BUILD_GROUP_ID" \
+          --groups "$NIX_BUILD_GROUP_NAME" \
+          --no-user-group \
+          --system \
+          --shell /sbin/nologin \
+          --uid "$uid" \
+          --password "!" \
+          "$username"
+}
diff --git a/third_party/nix/scripts/install.in b/third_party/nix/scripts/install.in
new file mode 100644
index 000000000000..902758b138a5
--- /dev/null
+++ b/third_party/nix/scripts/install.in
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+# This script installs the Nix package manager on your system by
+# downloading a binary distribution and running its installer script
+# (which in turn creates and populates /nix).
+
+{ # Prevent execution if this script was only partially downloaded
+oops() {
+    echo "$0:" "$@" >&2
+    exit 1
+}
+
+tmpDir="$(mktemp -d -t nix-binary-tarball-unpack.XXXXXXXXXX || \
+          oops "Can't create temporary directory for downloading the Nix binary tarball")"
+cleanup() {
+    rm -rf "$tmpDir"
+}
+trap cleanup EXIT INT QUIT TERM
+
+require_util() {
+    command -v "$1" > /dev/null 2>&1 ||
+        oops "you do not have '$1' installed, which I need to $2"
+}
+
+case "$(uname -s).$(uname -m)" in
+    Linux.x86_64) system=x86_64-linux; hash=@binaryTarball_x86_64-linux@;;
+    Linux.i?86) system=i686-linux; hash=@binaryTarball_i686-linux@;;
+    Linux.aarch64) system=aarch64-linux; hash=@binaryTarball_aarch64-linux@;;
+    Darwin.x86_64) system=x86_64-darwin; hash=@binaryTarball_x86_64-darwin@;;
+    *) oops "sorry, there is no binary distribution of Nix for your platform";;
+esac
+
+url="https://nixos.org/releases/nix/nix-@nixVersion@/nix-@nixVersion@-$system.tar.xz"
+
+tarball="$tmpDir/$(basename "$tmpDir/nix-@nixVersion@-$system.tar.xz")"
+
+require_util curl "download the binary tarball"
+require_util tar "unpack the binary tarball"
+
+echo "downloading Nix @nixVersion@ binary tarball for $system from '$url' to '$tmpDir'..."
+curl -L "$url" -o "$tarball" || oops "failed to download '$url'"
+
+if command -v sha256sum > /dev/null 2>&1; then
+    hash2="$(sha256sum -b "$tarball" | cut -c1-64)"
+elif command -v shasum > /dev/null 2>&1; then
+    hash2="$(shasum -a 256 -b "$tarball" | cut -c1-64)"
+elif command -v openssl > /dev/null 2>&1; then
+    hash2="$(openssl dgst -r -sha256 "$tarball" | cut -c1-64)"
+else
+    oops "cannot verify the SHA-256 hash of '$url'; you need one of 'shasum', 'sha256sum', or 'openssl'"
+fi
+
+if [ "$hash" != "$hash2" ]; then
+    oops "SHA-256 hash mismatch in '$url'; expected $hash, got $hash2"
+fi
+
+unpack=$tmpDir/unpack
+mkdir -p "$unpack"
+tar -xf "$tarball" -C "$unpack" || oops "failed to unpack '$url'"
+
+script=$(echo "$unpack"/*/install)
+
+[ -e "$script" ] || oops "installation script is missing from the binary tarball!"
+"$script" "$@"
+
+} # End of wrapping
diff --git a/third_party/nix/scripts/meson.build b/third_party/nix/scripts/meson.build
new file mode 100644
index 000000000000..8787a185d03e
--- /dev/null
+++ b/third_party/nix/scripts/meson.build
@@ -0,0 +1,74 @@
+# Nix corepkgs build file
+#============================================================================
+
+
+
+
+# src files
+#============================================================================
+
+scripts_data = files(
+    join_paths(meson.source_root(), 'scripts/install-darwin-multi-user.sh'),
+    join_paths(meson.source_root(), 'scripts/install-multi-user.sh'))
+
+
+
+
+
+# targets
+#============================================================================
+
+nix_profile_sh = configuration_data()
+nix_profile_sh.set('localstatedir', localstatedir)
+nix_profile_sh.set('coreutils', coreutils)
+
+nix_http_export_cgi = configuration_data()
+nix_http_export_cgi.set('bindir', bindir)
+nix_http_export_cgi.set('localstatedir', localstatedir)
+nix_http_export_cgi.set('coreutils', coreutils)
+nix_http_export_cgi.set('gzip', gzip.path())
+
+nix_reduce_build = configuration_data()
+nix_reduce_build.set('bash', bash.path())
+nix_reduce_build.set('bindir', bindir)
+nix_reduce_build.set('localstatedir', localstatedir)
+
+
+# TODO: make these work
+nix_install = configuration_data()
+nix_install.set('nixVersion', package_version)
+nix_install.set('binaryTarball_x86_64-linux', '')
+nix_install.set('binaryTarball_i686-linux', '')
+nix_install.set('binaryTarball_aarch64-linux', '')
+nix_install.set('binaryTarball_x86_64-darwin', '')
+
+
+
+
+# build
+#============================================================================
+
+scripts_data += configure_file(
+    input : 'nix-profile.sh.in',
+    output : 'nix.sh',
+    configuration : nix_profile_sh)
+
+scripts_data += configure_file(
+    input : 'nix-profile-daemon.sh.in',
+    output : 'nix-daemon.sh',
+    configuration : nix_profile_sh)
+
+scripts_data += configure_file(
+    input : 'nix-http-export.cgi.in',
+    output : 'nix-http-export.cgi',
+    configuration : nix_http_export_cgi)
+
+scripts_data += configure_file(
+    input : 'nix-reduce-build.in',
+    output : 'nix-reduce-build',
+    configuration : nix_reduce_build)
+
+install_data(
+    scripts_data,
+    install_mode : 'rwxr-xr-x',
+    install_dir : profiledir)
diff --git a/third_party/nix/scripts/nix-http-export.cgi.in b/third_party/nix/scripts/nix-http-export.cgi.in
new file mode 100755
index 000000000000..19a505af1c50
--- /dev/null
+++ b/third_party/nix/scripts/nix-http-export.cgi.in
@@ -0,0 +1,51 @@
+#! /bin/sh
+
+export HOME=/tmp
+export NIX_REMOTE=daemon
+
+TMP_DIR="${TMP_DIR:-/tmp/nix-export}"
+
+@coreutils@/mkdir -p "$TMP_DIR" || true
+@coreutils@/chmod a+r "$TMP_DIR"
+
+needed_path="?$QUERY_STRING"
+needed_path="${needed_path#*[?&]needed_path=}"
+needed_path="${needed_path%%&*}"
+#needed_path="$(echo $needed_path  | ./unhttp)"
+needed_path="${needed_path//%2B/+}"
+needed_path="${needed_path//%3D/=}"
+
+echo needed_path: "$needed_path" >&2
+
+NIX_STORE="${NIX_STORE_DIR:-/nix/store}"
+
+echo NIX_STORE: "${NIX_STORE}" >&2
+
+full_path="${NIX_STORE}"/"$needed_path"
+
+if [ "$needed_path" != "${needed_path%.drv}" ]; then
+	echo "Status: 403 You should create the derivation file yourself"
+	echo "Content-Type: text/plain"
+	echo
+	echo "Refusing to disclose derivation contents"
+	exit
+fi
+
+if @bindir@/nix-store --check-validity "$full_path"; then
+	if ! [ -e nix-export/"$needed_path".nar.gz ]; then
+		@bindir@/nix-store --export "$full_path" | @gzip@ > "$TMP_DIR"/"$needed_path".nar.gz
+		@coreutils@/ln -fs  "$TMP_DIR"/"$needed_path".nar.gz nix-export/"$needed_path".nar.gz 
+	fi;
+	echo "Status: 301 Moved"
+	echo "Location: nix-export/"$needed_path".nar.gz"
+	echo
+else 
+	echo "Status: 404 No such path found"
+	echo "Content-Type: text/plain"
+	echo
+	echo "Path not found:"
+	echo "$needed_path"
+	echo "checked:"
+	echo "$full_path"
+fi
+
diff --git a/third_party/nix/scripts/nix-profile-daemon.sh.in b/third_party/nix/scripts/nix-profile-daemon.sh.in
new file mode 100644
index 000000000000..47655080a674
--- /dev/null
+++ b/third_party/nix/scripts/nix-profile-daemon.sh.in
@@ -0,0 +1,29 @@
+# Only execute this file once per shell.
+if [ -n "${__ETC_PROFILE_NIX_SOURCED:-}" ]; then return; fi
+__ETC_PROFILE_NIX_SOURCED=1
+
+export NIX_USER_PROFILE_DIR="@localstatedir@/nix/profiles/per-user/$USER"
+export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile"
+
+# Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work.
+if [ ! -z "${NIX_SSL_CERT_FILE:-}" ]; then
+    : # Allow users to override the NIX_SSL_CERT_FILE
+elif [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch
+    export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
+elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed
+    export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem
+elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS
+    export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt
+elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS
+    export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt
+else
+  # Fall back to what is in the nix profiles, favouring whatever is defined last.
+  for i in $NIX_PROFILES; do
+    if [ -e $i/etc/ssl/certs/ca-bundle.crt ]; then
+      export NIX_SSL_CERT_FILE=$i/etc/ssl/certs/ca-bundle.crt
+    fi
+  done
+fi
+
+export NIX_PATH="nixpkgs=@localstatedir@/nix/profiles/per-user/root/channels/nixpkgs:@localstatedir@/nix/profiles/per-user/root/channels"
+export PATH="$HOME/.nix-profile/bin:@localstatedir@/nix/profiles/default/bin:$PATH"
diff --git a/third_party/nix/scripts/nix-profile.sh.in b/third_party/nix/scripts/nix-profile.sh.in
new file mode 100644
index 000000000000..e15f7cd46b76
--- /dev/null
+++ b/third_party/nix/scripts/nix-profile.sh.in
@@ -0,0 +1,39 @@
+if [ -n "$HOME" ] && [ -n "$USER" ]; then
+
+    # Set up the per-user profile.
+    # This part should be kept in sync with nixpkgs:nixos/modules/programs/shell.nix
+
+    NIX_LINK=$HOME/.nix-profile
+
+    NIX_USER_PROFILE_DIR=@localstatedir@/nix/profiles/per-user/$USER
+
+    # Append ~/.nix-defexpr/channels to $NIX_PATH so that <nixpkgs>
+    # paths work when the user has fetched the Nixpkgs channel.
+    export NIX_PATH=${NIX_PATH:+$NIX_PATH:}$HOME/.nix-defexpr/channels
+
+    # Set up environment.
+    # This part should be kept in sync with nixpkgs:nixos/modules/programs/environment.nix
+    export NIX_PROFILES="@localstatedir@/nix/profiles/default $HOME/.nix-profile"
+
+    # Set $NIX_SSL_CERT_FILE so that Nixpkgs applications like curl work.
+    if [ -e /etc/ssl/certs/ca-certificates.crt ]; then # NixOS, Ubuntu, Debian, Gentoo, Arch
+        export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
+    elif [ -e /etc/ssl/ca-bundle.pem ]; then # openSUSE Tumbleweed
+        export NIX_SSL_CERT_FILE=/etc/ssl/ca-bundle.pem
+    elif [ -e /etc/ssl/certs/ca-bundle.crt ]; then # Old NixOS
+        export NIX_SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt
+    elif [ -e /etc/pki/tls/certs/ca-bundle.crt ]; then # Fedora, CentOS
+        export NIX_SSL_CERT_FILE=/etc/pki/tls/certs/ca-bundle.crt
+    elif [ -e "$NIX_LINK/etc/ssl/certs/ca-bundle.crt" ]; then # fall back to cacert in Nix profile
+        export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ssl/certs/ca-bundle.crt"
+    elif [ -e "$NIX_LINK/etc/ca-bundle.crt" ]; then # old cacert in Nix profile
+        export NIX_SSL_CERT_FILE="$NIX_LINK/etc/ca-bundle.crt"
+    fi
+
+    if [ -n "${MANPATH-}" ]; then
+        export MANPATH="$NIX_LINK/share/man:$MANPATH"
+    fi
+
+    export PATH="$NIX_LINK/bin:$PATH"
+    unset NIX_LINK NIX_USER_PROFILE_DIR
+fi
diff --git a/third_party/nix/scripts/nix-reduce-build.in b/third_party/nix/scripts/nix-reduce-build.in
new file mode 100755
index 000000000000..50beb9d10b16
--- /dev/null
+++ b/third_party/nix/scripts/nix-reduce-build.in
@@ -0,0 +1,171 @@
+#! @bash@
+
+WORKING_DIRECTORY=$(mktemp -d "${TMPDIR:-/tmp}"/nix-reduce-build-XXXXXX);
+cd "$WORKING_DIRECTORY";
+
+if test -z "$1" || test "a--help" = "a$1" ; then
+	echo 'nix-reduce-build (paths or Nix expressions) -- (package sources)' >&2
+	echo As in: >&2
+	echo nix-reduce-build /etc/nixos/nixos -- ssh://user@somewhere.nowhere.example.org >&2
+	echo nix-reduce-build /etc/nixos/nixos -- \\
+	echo "   " \''http://somewhere.nowhere.example.org/nix/nix-http-export.cgi?needed_path='\' >&2
+	echo "  store path name will be added into the end of the URL" >&2
+	echo nix-reduce-build /etc/nixos/nixos -- file://home/user/nar/ >&2
+	echo "  that should be a directory where gzipped 'nix-store --export' ">&2
+	echo "  files are located (they should have .nar.gz extension)"  >&2
+	echo "        Or all together: " >&2
+	echo -e nix-reduce-build /expr.nix /e2.nix -- \\\\\\\n\
+	"    ssh://a@b.example.com http://n.example.com/get-nar?q= file://nar/" >&2
+	echo "        Also supports best-effort local builds of failing expression set:" >&2
+	echo "nix-reduce-build /e.nix -- nix-daemon:// nix-self://" >&2
+	echo "  nix-daemon:// builds using daemon"
+	echo "  nix-self:// builds directly using nix-store from current installation" >&2
+	echo "  nix-daemon-fixed:// and nix-self-fixed:// do the same, but only for" >&2;
+	echo "derivations with specified output hash (sha256, sha1 or md5)." >&2
+	echo "  nix-daemon-substitute:// and nix-self-substitute:// try to substitute" >&2;
+	echo "maximum amount of paths" >&2;
+	echo "  nix-daemon-build:// and nix-self-build:// try to build (not substitute)" >&2;
+	echo "maximum amount of paths" >&2;
+	echo "        If no package sources are specified, required paths are listed." >&2;
+	exit;
+fi;
+
+while ! test "$1" = "--" || test "$1" = "" ; do 
+	echo "$1" >> initial; >&2
+	shift;
+done
+shift;
+echo Will work on $(cat initial | wc -l) targets. >&2
+
+while read ; do
+	case "$REPLY" in 
+		${NIX_STORE_DIR:-/nix/store}/*)
+			echo "$REPLY" >> paths; >&2
+			;;
+		*)
+			(
+				IFS=: ;
+				nix-instantiate $REPLY >> paths;
+			);
+			;;
+	esac;
+done < initial;
+echo Proceeding $(cat paths | wc -l) paths. >&2
+
+while read; do
+	case "$REPLY" in
+		*.drv)
+			echo "$REPLY" >> derivers; >&2
+			;;
+		*)
+			nix-store --query --deriver "$REPLY" >>derivers;
+			;;
+	esac;
+done < paths;
+echo Found $(cat derivers | wc -l) derivers. >&2
+
+cat derivers | xargs nix-store --query -R > derivers-closure;
+echo Proceeding at most $(cat derivers-closure | wc -l) derivers. >&2
+
+cat derivers-closure | egrep '[.]drv$' | xargs nix-store --query --outputs > wanted-paths;
+cat derivers-closure | egrep -v '[.]drv$' >> wanted-paths;
+echo Prepared $(cat wanted-paths | wc -l) paths to get. >&2
+
+cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths;
+echo We need $(cat needed-paths | wc -l) paths. >&2
+
+egrep '[.]drv$' derivers-closure > critical-derivers;
+
+if test -z "$1" ; then
+	cat needed-paths;	
+fi;
+
+refresh_critical_derivers() {
+    echo "Finding needed derivers..." >&2;
+    cat critical-derivers | while read; do
+        if ! (nix-store --query --outputs "$REPLY" | xargs nix-store --check-validity &> /dev/null;); then
+            echo "$REPLY";
+        fi;
+    done > new-critical-derivers;
+    mv new-critical-derivers critical-derivers;
+    echo The needed paths are realized by $(cat critical-derivers | wc -l) derivers. >&2
+}
+
+build_here() {
+    cat critical-derivers | while read; do 
+        echo "Realising $REPLY using nix-daemon" >&2
+        @bindir@/nix-store -r "${REPLY}"
+    done;
+}
+
+try_to_substitute(){
+    cat needed-paths | while read ; do 
+        echo "Building $REPLY using nix-daemon" >&2
+        @bindir@/nix-store -r "${NIX_STORE_DIR:-/nix/store}/${REPLY##*/}"
+    done;
+}
+
+for i in "$@"; do 
+	sshHost="${i#ssh://}";
+	httpHost="${i#http://}";
+	httpsHost="${i#https://}";
+	filePath="${i#file:/}";
+	if [ "$i" != "$sshHost" ]; then
+		cat needed-paths | while read; do 
+			echo "Getting $REPLY and its closure over ssh" >&2
+			nix-copy-closure --from "$sshHost" --gzip "$REPLY" </dev/null || true; 
+		done;
+	elif [ "$i" != "$httpHost" ] || [ "$i" != "$httpsHost" ]; then
+		cat needed-paths | while read; do
+			echo "Getting $REPLY over http/https" >&2
+			curl ${BAD_CERTIFICATE:+-k} -L "$i${REPLY##*/}" | gunzip | nix-store --import;
+		done;
+	elif [ "$i" != "$filePath" ] ; then
+		cat needed-paths | while read; do 
+			echo "Installing $REPLY from file" >&2
+			gunzip < "$filePath/${REPLY##*/}".nar.gz | nix-store --import;
+		done;
+	elif [ "$i" = "nix-daemon://" ] ; then
+		NIX_REMOTE=daemon try_to_substitute;
+		refresh_critical_derivers;
+		NIX_REMOTE=daemon build_here;
+	elif [ "$i" = "nix-self://" ] ; then
+		NIX_REMOTE= try_to_substitute;
+		refresh_critical_derivers;
+		NIX_REMOTE= build_here;
+	elif [ "$i" = "nix-daemon-fixed://" ] ; then
+		refresh_critical_derivers;
+
+		cat critical-derivers | while read; do 
+			if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then
+				echo "Realising $REPLY using nix-daemon" >&2
+				NIX_REMOTE=daemon @bindir@/nix-store -r "${REPLY}"
+			fi;
+		done;
+	elif [ "$i" = "nix-self-fixed://" ] ; then
+		refresh_critical_derivers;
+
+		cat critical-derivers | while read; do 
+			if egrep '"(md5|sha1|sha256)"' "$REPLY" &>/dev/null; then
+				echo "Realising $REPLY using direct Nix build" >&2
+				NIX_REMOTE= @bindir@/nix-store -r "${REPLY}"
+			fi;
+		done;
+	elif [ "$i" = "nix-daemon-substitute://" ] ; then
+		NIX_REMOTE=daemon try_to_substitute;
+	elif [ "$i" = "nix-self-substitute://" ] ; then
+		NIX_REMOTE= try_to_substitute;
+	elif [ "$i" = "nix-daemon-build://" ] ; then
+		refresh_critical_derivers;
+		NIX_REMOTE=daemon build_here;
+	elif [ "$i" = "nix-self-build://" ] ; then
+		refresh_critical_derivers;
+		NIX_REMOTE= build_here;
+	fi;
+	mv needed-paths wanted-paths;
+	cat wanted-paths | xargs nix-store --check-validity --print-invalid > needed-paths;
+	echo We still need $(cat needed-paths | wc -l) paths. >&2
+done;
+
+cd /
+rm -r "$WORKING_DIRECTORY"