diff options
Diffstat (limited to 'third_party/nix/doc/manual/command-ref')
20 files changed, 6593 insertions, 0 deletions
diff --git a/third_party/nix/doc/manual/command-ref/command-ref.xml b/third_party/nix/doc/manual/command-ref/command-ref.xml new file mode 100644 index 000000000000..cfad9b7d7966 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/command-ref.xml @@ -0,0 +1,20 @@ +<part xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id='part-command-ref'> + +<title>Command Reference</title> + +<partintro> +<para>This section lists commands and options that you can use when you +work with Nix.</para> +</partintro> + +<xi:include href="opt-common.xml" /> +<xi:include href="env-common.xml" /> +<xi:include href="main-commands.xml" /> +<xi:include href="utilities.xml" /> +<xi:include href="files.xml" /> + +</part> diff --git a/third_party/nix/doc/manual/command-ref/conf-file.xml b/third_party/nix/doc/manual/command-ref/conf-file.xml new file mode 100644 index 000000000000..48dce7c950d9 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/conf-file.xml @@ -0,0 +1,1233 @@ +<?xml version="1.0" encoding="utf-8"?> +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + xml:id="sec-conf-file" + version="5"> + +<refmeta> + <refentrytitle>nix.conf</refentrytitle> + <manvolnum>5</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix.conf</refname> + <refpurpose>Nix configuration file</refpurpose> +</refnamediv> + +<refsection><title>Description</title> + +<para>Nix reads settings from two configuration files:</para> + +<itemizedlist> + + <listitem> + <para>The system-wide configuration file + <filename><replaceable>sysconfdir</replaceable>/nix/nix.conf</filename> + (i.e. <filename>/etc/nix/nix.conf</filename> on most systems), or + <filename>$NIX_CONF_DIR/nix.conf</filename> if + <envar>NIX_CONF_DIR</envar> is set.</para> + </listitem> + + <listitem> + <para>The user configuration file + <filename>$XDG_CONFIG_HOME/nix/nix.conf</filename>, or + <filename>~/.config/nix/nix.conf</filename> if + <envar>XDG_CONFIG_HOME</envar> is not set.</para> + </listitem> + +</itemizedlist> + +<para>The configuration files consist of +<literal><replaceable>name</replaceable> = +<replaceable>value</replaceable></literal> pairs, one per line. Other +files can be included with a line like <literal>include +<replaceable>path</replaceable></literal>, where +<replaceable>path</replaceable> is interpreted relative to the current +conf file and a missing file is an error unless +<literal>!include</literal> is used instead. +Comments start with a <literal>#</literal> character. Here is an +example configuration file:</para> + +<programlisting> +keep-outputs = true # Nice for developers +keep-derivations = true # Idem +</programlisting> + +<para>You can override settings on the command line using the +<option>--option</option> flag, e.g. <literal>--option keep-outputs +false</literal>.</para> + +<para>The following settings are currently available: + +<variablelist> + + + <varlistentry xml:id="conf-allowed-uris"><term><literal>allowed-uris</literal></term> + + <listitem> + + <para>A list of URI prefixes to which access is allowed in + restricted evaluation mode. For example, when set to + <literal>https://github.com/NixOS</literal>, builtin functions + such as <function>fetchGit</function> are allowed to access + <literal>https://github.com/NixOS/patchelf.git</literal>.</para> + + </listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-allow-import-from-derivation"><term><literal>allow-import-from-derivation</literal></term> + + <listitem><para>By default, Nix allows you to <function>import</function> from a derivation, + allowing building at evaluation time. With this option set to false, Nix will throw an error + when evaluating an expression that uses this feature, allowing users to ensure their evaluation + will not require any builds to take place.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-allow-new-privileges"><term><literal>allow-new-privileges</literal></term> + + <listitem><para>(Linux-specific.) By default, builders on Linux + cannot acquire new privileges by calling setuid/setgid programs or + programs that have file capabilities. For example, programs such + as <command>sudo</command> or <command>ping</command> will + fail. (Note that in sandbox builds, no such programs are available + unless you bind-mount them into the sandbox via the + <option>sandbox-paths</option> option.) You can allow the + use of such programs by enabling this option. This is impure and + usually undesirable, but may be useful in certain scenarios + (e.g. to spin up containers or set up userspace network interfaces + in tests).</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-allowed-users"><term><literal>allowed-users</literal></term> + + <listitem> + + <para>A list of names of users (separated by whitespace) that + are allowed to connect to the Nix daemon. As with the + <option>trusted-users</option> option, you can specify groups by + prefixing them with <literal>@</literal>. Also, you can allow + all users by specifying <literal>*</literal>. The default is + <literal>*</literal>.</para> + + <para>Note that trusted users are always allowed to connect.</para> + + </listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-auto-optimise-store"><term><literal>auto-optimise-store</literal></term> + + <listitem><para>If set to <literal>true</literal>, Nix + automatically detects files in the store that have identical + contents, and replaces them with hard links to a single copy. + This saves disk space. If set to <literal>false</literal> (the + default), you can still run <command>nix-store + --optimise</command> to get rid of duplicate + files.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-builders"> + <term><literal>builders</literal></term> + <listitem> + <para>A list of machines on which to perform builds. <phrase + condition="manual">See <xref linkend="chap-distributed-builds" + /> for details.</phrase></para> + </listitem> + </varlistentry> + + + <varlistentry xml:id="conf-builders-use-substitutes"><term><literal>builders-use-substitutes</literal></term> + + <listitem><para>If set to <literal>true</literal>, Nix will instruct + remote build machines to use their own binary substitutes if available. In + practical terms, this means that remote hosts will fetch as many build + dependencies as possible from their own substitutes (e.g, from + <literal>cache.nixos.org</literal>), instead of waiting for this host to + upload them all. This can drastically reduce build times if the network + connection between this computer and the remote build host is slow. Defaults + to <literal>false</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-build-users-group"><term><literal>build-users-group</literal></term> + + <listitem><para>This options specifies the Unix group containing + the Nix build user accounts. In multi-user Nix installations, + builds should not be performed by the Nix account since that would + allow users to arbitrarily modify the Nix store and database by + supplying specially crafted builders; and they cannot be performed + by the calling user since that would allow him/her to influence + the build result.</para> + + <para>Therefore, if this option is non-empty and specifies a valid + group, builds will be performed under the user accounts that are a + member of the group specified here (as listed in + <filename>/etc/group</filename>). Those user accounts should not + be used for any other purpose!</para> + + <para>Nix will never run two builds under the same user account at + the same time. This is to prevent an obvious security hole: a + malicious user writing a Nix expression that modifies the build + result of a legitimate Nix expression being built by another user. + Therefore it is good to have as many Nix build user accounts as + you can spare. (Remember: uids are cheap.)</para> + + <para>The build users should have permission to create files in + the Nix store, but not delete them. Therefore, + <filename>/nix/store</filename> should be owned by the Nix + account, its group should be the group specified here, and its + mode should be <literal>1775</literal>.</para> + + <para>If the build users group is empty, builds will be performed + under the uid of the Nix process (that is, the uid of the caller + if <envar>NIX_REMOTE</envar> is empty, the uid under which the Nix + daemon runs if <envar>NIX_REMOTE</envar> is + <literal>daemon</literal>). Obviously, this should not be used in + multi-user settings with untrusted users.</para> + + </listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-compress-build-log"><term><literal>compress-build-log</literal></term> + + <listitem><para>If set to <literal>true</literal> (the default), + build logs written to <filename>/nix/var/log/nix/drvs</filename> + will be compressed on the fly using bzip2. Otherwise, they will + not be compressed.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-connect-timeout"><term><literal>connect-timeout</literal></term> + + <listitem> + + <para>The timeout (in seconds) for establishing connections in + the binary cache substituter. It corresponds to + <command>curl</command>’s <option>--connect-timeout</option> + option.</para> + + </listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-cores"><term><literal>cores</literal></term> + + <listitem><para>Sets the value of the + <envar>NIX_BUILD_CORES</envar> environment variable in the + invocation of builders. Builders can use this variable at their + discretion to control the maximum amount of parallelism. For + instance, in Nixpkgs, if the derivation attribute + <varname>enableParallelBuilding</varname> is set to + <literal>true</literal>, the builder passes the + <option>-j<replaceable>N</replaceable></option> flag to GNU Make. + It can be overridden using the <option + linkend='opt-cores'>--cores</option> command line switch and + defaults to <literal>1</literal>. The value <literal>0</literal> + means that the builder should use all available CPU cores in the + system.</para> + + <para>See also <xref linkend="chap-tuning-cores-and-jobs" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-diff-hook"><term><literal>diff-hook</literal></term> + <listitem> + <para> + Absolute path to an executable capable of diffing build results. + The hook executes if <xref linkend="conf-run-diff-hook" /> is + true, and the output of a build is known to not be the same. + This program is not executed to determine if two results are the + same. + </para> + + <para> + The diff hook is executed by the same user and group who ran the + build. However, the diff hook does not have write access to the + store path just built. + </para> + + <para>The diff hook program receives three parameters:</para> + + <orderedlist> + <listitem> + <para> + A path to the previous build's results + </para> + </listitem> + + <listitem> + <para> + A path to the current build's results + </para> + </listitem> + + <listitem> + <para> + The path to the build's derivation + </para> + </listitem> + + <listitem> + <para> + The path to the build's scratch directory. This directory + will exist only if the build was run with + <option>--keep-failed</option>. + </para> + </listitem> + </orderedlist> + + <para> + The stderr and stdout output from the diff hook will not be + displayed to the user. Instead, it will print to the nix-daemon's + log. + </para> + + <para>When using the Nix daemon, <literal>diff-hook</literal> must + be set in the <filename>nix.conf</filename> configuration file, and + cannot be passed at the command line. + </para> + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-enforce-determinism"> + <term><literal>enforce-determinism</literal></term> + + <listitem><para>See <xref linkend="conf-repeat" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-extra-sandbox-paths"> + <term><literal>extra-sandbox-paths</literal></term> + + <listitem><para>A list of additional paths appended to + <option>sandbox-paths</option>. Useful if you want to extend + its default value.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-extra-platforms"><term><literal>extra-platforms</literal></term> + + <listitem><para>Platforms other than the native one which + this machine is capable of building for. This can be useful for + supporting additional architectures on compatible machines: + i686-linux can be built on x86_64-linux machines (and the default + for this setting reflects this); armv7 is backwards-compatible with + armv6 and armv5tel; some aarch64 machines can also natively run + 32-bit ARM code; and qemu-user may be used to support non-native + platforms (though this may be slow and buggy). Most values for this + are not enabled by default because build systems will often + misdetect the target platform and generate incompatible code, so you + may wish to cross-check the results of using this option against + proper natively-built versions of your + derivations.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-extra-substituters"><term><literal>extra-substituters</literal></term> + + <listitem><para>Additional binary caches appended to those + specified in <option>substituters</option>. When used by + unprivileged users, untrusted substituters (i.e. those not listed + in <option>trusted-substituters</option>) are silently + ignored.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-fallback"><term><literal>fallback</literal></term> + + <listitem><para>If set to <literal>true</literal>, Nix will fall + back to building from source if a binary substitute fails. This + is equivalent to the <option>--fallback</option> flag. The + default is <literal>false</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-fsync-metadata"><term><literal>fsync-metadata</literal></term> + + <listitem><para>If set to <literal>true</literal>, changes to the + Nix store metadata (in <filename>/nix/var/nix/db</filename>) are + synchronously flushed to disk. This improves robustness in case + of system crashes, but reduces performance. The default is + <literal>true</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-hashed-mirrors"><term><literal>hashed-mirrors</literal></term> + + <listitem><para>A list of web servers used by + <function>builtins.fetchurl</function> to obtain files by + hash. The default is + <literal>http://tarballs.nixos.org/</literal>. Given a hash type + <replaceable>ht</replaceable> and a base-16 hash + <replaceable>h</replaceable>, Nix will try to download the file + from + <literal>hashed-mirror/<replaceable>ht</replaceable>/<replaceable>h</replaceable></literal>. + This allows files to be downloaded even if they have disappeared + from their original URI. For example, given the default mirror + <literal>http://tarballs.nixos.org/</literal>, when building the derivation + +<programlisting> +builtins.fetchurl { + url = https://example.org/foo-1.2.3.tar.xz; + sha256 = "2c26b46b68ffc68ff99b453c1d30413413422d706483bfa0f98a5e886266e7ae"; +} +</programlisting> + + Nix will attempt to download this file from + <literal>http://tarballs.nixos.org/sha256/2c26b46b68ffc68ff99b453c1d30413413422d706483bfa0f98a5e886266e7ae</literal> + first. If it is not available there, if will try the original URI.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-http-connections"><term><literal>http-connections</literal></term> + + <listitem><para>The maximum number of parallel TCP connections + used to fetch files from binary caches and by other downloads. It + defaults to 25. 0 means no limit.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-keep-build-log"><term><literal>keep-build-log</literal></term> + + <listitem><para>If set to <literal>true</literal> (the default), + Nix will write the build log of a derivation (i.e. the standard + output and error of its builder) to the directory + <filename>/nix/var/log/nix/drvs</filename>. The build log can be + retrieved using the command <command>nix-store -l + <replaceable>path</replaceable></command>.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-keep-derivations"><term><literal>keep-derivations</literal></term> + + <listitem><para>If <literal>true</literal> (default), the garbage + collector will keep the derivations from which non-garbage store + paths were built. If <literal>false</literal>, they will be + deleted unless explicitly registered as a root (or reachable from + other roots).</para> + + <para>Keeping derivation around is useful for querying and + traceability (e.g., it allows you to ask with what dependencies or + options a store path was built), so by default this option is on. + Turn it off to save a bit of disk space (or a lot if + <literal>keep-outputs</literal> is also turned on).</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-keep-env-derivations"><term><literal>keep-env-derivations</literal></term> + + <listitem><para>If <literal>false</literal> (default), derivations + are not stored in Nix user environments. That is, the derivations of + any build-time-only dependencies may be garbage-collected.</para> + + <para>If <literal>true</literal>, when you add a Nix derivation to + a user environment, the path of the derivation is stored in the + user environment. Thus, the derivation will not be + garbage-collected until the user environment generation is deleted + (<command>nix-env --delete-generations</command>). To prevent + build-time-only dependencies from being collected, you should also + turn on <literal>keep-outputs</literal>.</para> + + <para>The difference between this option and + <literal>keep-derivations</literal> is that this one is + “sticky”: it applies to any user environment created while this + option was enabled, while <literal>keep-derivations</literal> + only applies at the moment the garbage collector is + run.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-keep-outputs"><term><literal>keep-outputs</literal></term> + + <listitem><para>If <literal>true</literal>, the garbage collector + will keep the outputs of non-garbage derivations. If + <literal>false</literal> (default), outputs will be deleted unless + they are GC roots themselves (or reachable from other roots).</para> + + <para>In general, outputs must be registered as roots separately. + However, even if the output of a derivation is registered as a + root, the collector will still delete store paths that are used + only at build time (e.g., the C compiler, or source tarballs + downloaded from the network). To prevent it from doing so, set + this option to <literal>true</literal>.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-max-build-log-size"><term><literal>max-build-log-size</literal></term> + + <listitem> + + <para>This option defines the maximum number of bytes that a + builder can write to its stdout/stderr. If the builder exceeds + this limit, it’s killed. A value of <literal>0</literal> (the + default) means that there is no limit.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-max-free"><term><literal>max-free</literal></term> + + <listitem><para>When a garbage collection is triggered by the + <literal>min-free</literal> option, it stops as soon as + <literal>max-free</literal> bytes are available. The default is + infinity (i.e. delete all garbage).</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-max-jobs"><term><literal>max-jobs</literal></term> + + <listitem><para>This option defines the maximum number of jobs + that Nix will try to build in parallel. The default is + <literal>1</literal>. The special value <literal>auto</literal> + causes Nix to use the number of CPUs in your system. <literal>0</literal> + is useful when using remote builders to prevent any local builds (except for + <literal>preferLocalBuild</literal> derivation attribute which executes locally + regardless). It can be + overridden using the <option + linkend='opt-max-jobs'>--max-jobs</option> (<option>-j</option>) + command line switch.</para> + + <para>See also <xref linkend="chap-tuning-cores-and-jobs" />.</para> + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-max-silent-time"><term><literal>max-silent-time</literal></term> + + <listitem> + + <para>This option defines the maximum number of seconds that a + builder can go without producing any data on standard output or + standard error. This is useful (for instance in an automated + build system) to catch builds that are stuck in an infinite + loop, or to catch remote builds that are hanging due to network + problems. It can be overridden using the <option + linkend="opt-max-silent-time">--max-silent-time</option> command + line switch.</para> + + <para>The value <literal>0</literal> means that there is no + timeout. This is also the default.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-min-free"><term><literal>min-free</literal></term> + + <listitem> + <para>When free disk space in <filename>/nix/store</filename> + drops below <literal>min-free</literal> during a build, Nix + performs a garbage-collection until <literal>max-free</literal> + bytes are available or there is no more garbage. A value of + <literal>0</literal> (the default) disables this feature.</para> + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-narinfo-cache-negative-ttl"><term><literal>narinfo-cache-negative-ttl</literal></term> + + <listitem> + + <para>The TTL in seconds for negative lookups. If a store path is + queried from a substituter but was not found, there will be a + negative lookup cached in the local disk cache database for the + specified duration.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-narinfo-cache-positive-ttl"><term><literal>narinfo-cache-positive-ttl</literal></term> + + <listitem> + + <para>The TTL in seconds for positive lookups. If a store path is + queried from a substituter, the result of the query will be cached + in the local disk cache database including some of the NAR + metadata. The default TTL is a month, setting a shorter TTL for + positive lookups can be useful for binary caches that have + frequent garbage collection, in which case having a more frequent + cache invalidation would prevent trying to pull the path again and + failing with a hash mismatch if the build isn't reproducible. + </para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-netrc-file"><term><literal>netrc-file</literal></term> + + <listitem><para>If set to an absolute path to a <filename>netrc</filename> + file, Nix will use the HTTP authentication credentials in this file when + trying to download from a remote host through HTTP or HTTPS. Defaults to + <filename>$NIX_CONF_DIR/netrc</filename>.</para> + + <para>The <filename>netrc</filename> file consists of a list of + accounts in the following format: + +<screen> +machine <replaceable>my-machine</replaceable> +login <replaceable>my-username</replaceable> +password <replaceable>my-password</replaceable> +</screen> + + For the exact syntax, see <link + xlink:href="https://ec.haxx.se/usingcurl-netrc.html">the + <literal>curl</literal> documentation.</link></para> + + <note><para>This must be an absolute path, and <literal>~</literal> + is not resolved. For example, <filename>~/.netrc</filename> won't + resolve to your home directory's <filename>.netrc</filename>.</para></note> + </listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-plugin-files"> + <term><literal>plugin-files</literal></term> + <listitem> + <para> + A list of plugin files to be loaded by Nix. Each of these + files will be dlopened by Nix, allowing them to affect + execution through static initialization. In particular, these + plugins may construct static instances of RegisterPrimOp to + add new primops or constants to the expression language, + RegisterStoreImplementation to add new store implementations, + RegisterCommand to add new subcommands to the + <literal>nix</literal> command, and RegisterSetting to add new + nix config settings. See the constructors for those types for + more details. + </para> + <para> + Since these files are loaded into the same address space as + Nix itself, they must be DSOs compatible with the instance of + Nix running at the time (i.e. compiled against the same + headers, not linked to any incompatible libraries). They + should not be linked to any Nix libs directly, as those will + be available already at load time. + </para> + <para> + If an entry in the list is a directory, all files in the + directory are loaded as plugins (non-recursively). + </para> + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-pre-build-hook"><term><literal>pre-build-hook</literal></term> + + <listitem> + + + <para>If set, the path to a program that can set extra + derivation-specific settings for this system. This is used for settings + that can't be captured by the derivation model itself and are too variable + between different versions of the same system to be hard-coded into nix. + </para> + + <para>The hook is passed the derivation path and, if sandboxes are enabled, + the sandbox directory. It can then modify the sandbox and send a series of + commands to modify various settings to stdout. The currently recognized + commands are:</para> + + <variablelist> + <varlistentry xml:id="extra-sandbox-paths"> + <term><literal>extra-sandbox-paths</literal></term> + + <listitem> + + <para>Pass a list of files and directories to be included in the + sandbox for this build. One entry per line, terminated by an empty + line. Entries have the same format as + <literal>sandbox-paths</literal>.</para> + + </listitem> + + </varlistentry> + </variablelist> + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-post-build-hook"> + <term><literal>post-build-hook</literal></term> + <listitem> + <para>Optional. The path to a program to execute after each build.</para> + + <para>This option is only settable in the global + <filename>nix.conf</filename>, or on the command line by trusted + users.</para> + + <para>When using the nix-daemon, the daemon executes the hook as + <literal>root</literal>. If the nix-daemon is not involved, the + hook runs as the user executing the nix-build.</para> + + <itemizedlist> + <listitem><para>The hook executes after an evaluation-time build.</para></listitem> + <listitem><para>The hook does not execute on substituted paths.</para></listitem> + <listitem><para>The hook's output always goes to the user's terminal.</para></listitem> + <listitem><para>If the hook fails, the build succeeds but no further builds execute.</para></listitem> + <listitem><para>The hook executes synchronously, and blocks other builds from progressing while it runs.</para></listitem> + </itemizedlist> + + <para>The program executes with no arguments. The program's environment + contains the following environment variables:</para> + + <variablelist> + <varlistentry> + <term><envar>DRV_PATH</envar></term> + <listitem> + <para>The derivation for the built paths.</para> + <para>Example: + <literal>/nix/store/5nihn1a7pa8b25l9zafqaqibznlvvp3f-bash-4.4-p23.drv</literal> + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term><envar>OUT_PATHS</envar></term> + <listitem> + <para>Output paths of the built derivation, separated by a space character.</para> + <para>Example: + <literal>/nix/store/zf5lbh336mnzf1nlswdn11g4n2m8zh3g-bash-4.4-p23-dev + /nix/store/rjxwxwv1fpn9wa2x5ssk5phzwlcv4mna-bash-4.4-p23-doc + /nix/store/6bqvbzjkcp9695dq0dpl5y43nvy37pq1-bash-4.4-p23-info + /nix/store/r7fng3kk3vlpdlh2idnrbn37vh4imlj2-bash-4.4-p23-man + /nix/store/xfghy8ixrhz3kyy6p724iv3cxji088dx-bash-4.4-p23</literal>. + </para> + </listitem> + </varlistentry> + </variablelist> + + <para>See <xref linkend="chap-post-build-hook" /> for an example + implementation.</para> + + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-repeat"><term><literal>repeat</literal></term> + + <listitem><para>How many times to repeat builds to check whether + they are deterministic. The default value is 0. If the value is + non-zero, every build is repeated the specified number of + times. If the contents of any of the runs differs from the + previous ones and <xref linkend="conf-enforce-determinism" /> is + true, the build is rejected and the resulting store paths are not + registered as “valid” in Nix’s database.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-require-sigs"><term><literal>require-sigs</literal></term> + + <listitem><para>If set to <literal>true</literal> (the default), + any non-content-addressed path added or copied to the Nix store + (e.g. when substituting from a binary cache) must have a valid + signature, that is, be signed using one of the keys listed in + <option>trusted-public-keys</option> or + <option>secret-key-files</option>. Set to <literal>false</literal> + to disable signature checking.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-restrict-eval"><term><literal>restrict-eval</literal></term> + + <listitem> + + <para>If set to <literal>true</literal>, the Nix evaluator will + not allow access to any files outside of the Nix search path (as + set via the <envar>NIX_PATH</envar> environment variable or the + <option>-I</option> option), or to URIs outside of + <option>allowed-uri</option>. The default is + <literal>false</literal>.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-run-diff-hook"><term><literal>run-diff-hook</literal></term> + <listitem> + <para> + If true, enable the execution of <xref linkend="conf-diff-hook" />. + </para> + + <para> + When using the Nix daemon, <literal>run-diff-hook</literal> must + be set in the <filename>nix.conf</filename> configuration file, + and cannot be passed at the command line. + </para> + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-sandbox"><term><literal>sandbox</literal></term> + + <listitem><para>If set to <literal>true</literal>, builds will be + performed in a <emphasis>sandboxed environment</emphasis>, i.e., + they’re isolated from the normal file system hierarchy and will + only see their dependencies in the Nix store, the temporary build + directory, private versions of <filename>/proc</filename>, + <filename>/dev</filename>, <filename>/dev/shm</filename> and + <filename>/dev/pts</filename> (on Linux), and the paths configured with the + <link linkend='conf-sandbox-paths'><literal>sandbox-paths</literal> + option</link>. This is useful to prevent undeclared dependencies + on files in directories such as <filename>/usr/bin</filename>. In + addition, on Linux, builds run in private PID, mount, network, IPC + and UTS namespaces to isolate them from other processes in the + system (except that fixed-output derivations do not run in private + network namespace to ensure they can access the network).</para> + + <para>Currently, sandboxing only work on Linux and macOS. The use + of a sandbox requires that Nix is run as root (so you should use + the <link linkend='conf-build-users-group'>“build users” + feature</link> to perform the actual builds under different users + than root).</para> + + <para>If this option is set to <literal>relaxed</literal>, then + fixed-output derivations and derivations that have the + <varname>__noChroot</varname> attribute set to + <literal>true</literal> do not run in sandboxes.</para> + + <para>The default is <literal>true</literal> on Linux and + <literal>false</literal> on all other platforms.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-sandbox-dev-shm-size"><term><literal>sandbox-dev-shm-size</literal></term> + + <listitem><para>This option determines the maximum size of the + <literal>tmpfs</literal> filesystem mounted on + <filename>/dev/shm</filename> in Linux sandboxes. For the format, + see the description of the <option>size</option> option of + <literal>tmpfs</literal> in + <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>. The + default is <literal>50%</literal>.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-sandbox-paths"> + <term><literal>sandbox-paths</literal></term> + + <listitem><para>A list of paths bind-mounted into Nix sandbox + environments. You can use the syntax + <literal><replaceable>target</replaceable>=<replaceable>source</replaceable></literal> + to mount a path in a different location in the sandbox; for + instance, <literal>/bin=/nix-bin</literal> will mount the path + <literal>/nix-bin</literal> as <literal>/bin</literal> inside the + sandbox. If <replaceable>source</replaceable> is followed by + <literal>?</literal>, then it is not an error if + <replaceable>source</replaceable> does not exist; for example, + <literal>/dev/nvidiactl?</literal> specifies that + <filename>/dev/nvidiactl</filename> will only be mounted in the + sandbox if it exists in the host filesystem.</para> + + <para>Depending on how Nix was built, the default value for this option + may be empty or provide <filename>/bin/sh</filename> as a + bind-mount of <command>bash</command>.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-secret-key-files"><term><literal>secret-key-files</literal></term> + + <listitem><para>A whitespace-separated list of files containing + secret (private) keys. These are used to sign locally-built + paths. They can be generated using <command>nix-store + --generate-binary-cache-key</command>. The corresponding public + key can be distributed to other users, who can add it to + <option>trusted-public-keys</option> in their + <filename>nix.conf</filename>.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-show-trace"><term><literal>show-trace</literal></term> + + <listitem><para>Causes Nix to print out a stack trace in case of Nix + expression evaluation errors.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-substitute"><term><literal>substitute</literal></term> + + <listitem><para>If set to <literal>true</literal> (default), Nix + will use binary substitutes if available. This option can be + disabled to force building from source.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-stalled-download-timeout"><term><literal>stalled-download-timeout</literal></term> + <listitem> + <para>The timeout (in seconds) for receiving data from servers + during download. Nix cancels idle downloads after this timeout's + duration.</para> + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-substituters"><term><literal>substituters</literal></term> + + <listitem><para>A list of URLs of substituters, separated by + whitespace. The default is + <literal>https://cache.nixos.org</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-system"><term><literal>system</literal></term> + + <listitem><para>This option specifies the canonical Nix system + name of the current installation, such as + <literal>i686-linux</literal> or + <literal>x86_64-darwin</literal>. Nix can only build derivations + whose <literal>system</literal> attribute equals the value + specified here. In general, it never makes sense to modify this + value from its default, since you can use it to ‘lie’ about the + platform you are building on (e.g., perform a Mac OS build on a + Linux machine; the result would obviously be wrong). It only + makes sense if the Nix binaries can run on multiple platforms, + e.g., ‘universal binaries’ that run on <literal>x86_64-linux</literal> and + <literal>i686-linux</literal>.</para> + + <para>It defaults to the canonical Nix system name detected by + <filename>configure</filename> at build time.</para></listitem> + + </varlistentry> + + + <varlistentry xml:id="conf-system-features"><term><literal>system-features</literal></term> + + <listitem><para>A set of system “features” supported by this + machine, e.g. <literal>kvm</literal>. Derivations can express a + dependency on such features through the derivation attribute + <varname>requiredSystemFeatures</varname>. For example, the + attribute + +<programlisting> +requiredSystemFeatures = [ "kvm" ]; +</programlisting> + + ensures that the derivation can only be built on a machine with + the <literal>kvm</literal> feature.</para> + + <para>This setting by default includes <literal>kvm</literal> if + <filename>/dev/kvm</filename> is accessible, and the + pseudo-features <literal>nixos-test</literal>, + <literal>benchmark</literal> and <literal>big-parallel</literal> + that are used in Nixpkgs to route builds to specific + machines.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-tarball-ttl"><term><literal>tarball-ttl</literal></term> + + <listitem> + <para>Default: <literal>3600</literal> seconds.</para> + + <para>The number of seconds a downloaded tarball is considered + fresh. If the cached tarball is stale, Nix will check whether + it is still up to date using the ETag header. Nix will download + a new version if the ETag header is unsupported, or the + cached ETag doesn't match. + </para> + + <para>Setting the TTL to <literal>0</literal> forces Nix to always + check if the tarball is up to date.</para> + + <para>Nix caches tarballs in + <filename>$XDG_CACHE_HOME/nix/tarballs</filename>.</para> + + <para>Files fetched via <envar>NIX_PATH</envar>, + <function>fetchGit</function>, <function>fetchMercurial</function>, + <function>fetchTarball</function>, and <function>fetchurl</function> + respect this TTL. + </para> + </listitem> + </varlistentry> + + <varlistentry xml:id="conf-timeout"><term><literal>timeout</literal></term> + + <listitem> + + <para>This option defines the maximum number of seconds that a + builder can run. This is useful (for instance in an automated + build system) to catch builds that are stuck in an infinite loop + but keep writing to their standard output or standard error. It + can be overridden using the <option + linkend="opt-timeout">--timeout</option> command line + switch.</para> + + <para>The value <literal>0</literal> means that there is no + timeout. This is also the default.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-trace-function-calls"><term><literal>trace-function-calls</literal></term> + + <listitem> + + <para>Default: <literal>false</literal>.</para> + + <para>If set to <literal>true</literal>, the Nix evaluator will + trace every function call. Nix will print a log message at the + "vomit" level for every function entrance and function exit.</para> + + <informalexample><screen> +function-trace entered undefined position at 1565795816999559622 +function-trace exited undefined position at 1565795816999581277 +function-trace entered /nix/store/.../example.nix:226:41 at 1565795253249935150 +function-trace exited /nix/store/.../example.nix:226:41 at 1565795253249941684 +</screen></informalexample> + + <para>The <literal>undefined position</literal> means the function + call is a builtin.</para> + + <para>Use the <literal>contrib/stack-collapse.py</literal> script + distributed with the Nix source code to convert the trace logs + in to a format suitable for <command>flamegraph.pl</command>.</para> + + </listitem> + + </varlistentry> + + <varlistentry xml:id="conf-trusted-public-keys"><term><literal>trusted-public-keys</literal></term> + + <listitem><para>A whitespace-separated list of public keys. When + paths are copied from another Nix store (such as a binary cache), + they must be signed with one of these keys. For example: + <literal>cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY= + hydra.nixos.org-1:CNHJZBh9K4tP3EKF6FkkgeVYsS3ohTl+oS0Qa8bezVs=</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-trusted-substituters"><term><literal>trusted-substituters</literal></term> + + <listitem><para>A list of URLs of substituters, separated by + whitespace. These are not used by default, but can be enabled by + users of the Nix daemon by specifying <literal>--option + substituters <replaceable>urls</replaceable></literal> on the + command line. Unprivileged users are only allowed to pass a + subset of the URLs listed in <literal>substituters</literal> and + <literal>trusted-substituters</literal>.</para></listitem> + + </varlistentry> + + <varlistentry xml:id="conf-trusted-users"><term><literal>trusted-users</literal></term> + + <listitem> + + <para>A list of names of users (separated by whitespace) that + have additional rights when connecting to the Nix daemon, such + as the ability to specify additional binary caches, or to import + unsigned NARs. You can also specify groups by prefixing them + with <literal>@</literal>; for instance, + <literal>@wheel</literal> means all users in the + <literal>wheel</literal> group. The default is + <literal>root</literal>.</para> + + <warning><para>Adding a user to <option>trusted-users</option> + is essentially equivalent to giving that user root access to the + system. For example, the user can set + <option>sandbox-paths</option> and thereby obtain read access to + directories that are otherwise inacessible to + them.</para></warning> + + </listitem> + + </varlistentry> + +</variablelist> +</para> + +<refsection> + <title>Deprecated Settings</title> + +<para> + +<variablelist> + + <varlistentry xml:id="conf-binary-caches"> + <term><literal>binary-caches</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>binary-caches</literal> is now an alias to + <xref linkend="conf-substituters" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-binary-cache-public-keys"> + <term><literal>binary-cache-public-keys</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>binary-cache-public-keys</literal> is now an alias to + <xref linkend="conf-trusted-public-keys" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-compress-log"> + <term><literal>build-compress-log</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-compress-log</literal> is now an alias to + <xref linkend="conf-compress-build-log" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-cores"> + <term><literal>build-cores</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-cores</literal> is now an alias to + <xref linkend="conf-cores" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-extra-chroot-dirs"> + <term><literal>build-extra-chroot-dirs</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-extra-chroot-dirs</literal> is now an alias to + <xref linkend="conf-extra-sandbox-paths" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-extra-sandbox-paths"> + <term><literal>build-extra-sandbox-paths</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-extra-sandbox-paths</literal> is now an alias to + <xref linkend="conf-extra-sandbox-paths" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-fallback"> + <term><literal>build-fallback</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-fallback</literal> is now an alias to + <xref linkend="conf-fallback" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-max-jobs"> + <term><literal>build-max-jobs</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-max-jobs</literal> is now an alias to + <xref linkend="conf-max-jobs" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-max-log-size"> + <term><literal>build-max-log-size</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-max-log-size</literal> is now an alias to + <xref linkend="conf-max-build-log-size" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-max-silent-time"> + <term><literal>build-max-silent-time</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-max-silent-time</literal> is now an alias to + <xref linkend="conf-max-silent-time" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-repeat"> + <term><literal>build-repeat</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-repeat</literal> is now an alias to + <xref linkend="conf-repeat" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-timeout"> + <term><literal>build-timeout</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-timeout</literal> is now an alias to + <xref linkend="conf-timeout" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-use-chroot"> + <term><literal>build-use-chroot</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-use-chroot</literal> is now an alias to + <xref linkend="conf-sandbox" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-use-sandbox"> + <term><literal>build-use-sandbox</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-use-sandbox</literal> is now an alias to + <xref linkend="conf-sandbox" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-build-use-substitutes"> + <term><literal>build-use-substitutes</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>build-use-substitutes</literal> is now an alias to + <xref linkend="conf-substitute" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-gc-keep-derivations"> + <term><literal>gc-keep-derivations</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>gc-keep-derivations</literal> is now an alias to + <xref linkend="conf-keep-derivations" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-gc-keep-outputs"> + <term><literal>gc-keep-outputs</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>gc-keep-outputs</literal> is now an alias to + <xref linkend="conf-keep-outputs" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-env-keep-derivations"> + <term><literal>env-keep-derivations</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>env-keep-derivations</literal> is now an alias to + <xref linkend="conf-keep-env-derivations" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-extra-binary-caches"> + <term><literal>extra-binary-caches</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>extra-binary-caches</literal> is now an alias to + <xref linkend="conf-extra-substituters" />.</para></listitem> + </varlistentry> + + <varlistentry xml:id="conf-trusted-binary-caches"> + <term><literal>trusted-binary-caches</literal></term> + + <listitem><para><emphasis>Deprecated:</emphasis> + <literal>trusted-binary-caches</literal> is now an alias to + <xref linkend="conf-trusted-substituters" />.</para></listitem> + </varlistentry> +</variablelist> +</para> +</refsection> + +</refsection> + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/env-common.xml b/third_party/nix/doc/manual/command-ref/env-common.xml new file mode 100644 index 000000000000..696d68c34516 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/env-common.xml @@ -0,0 +1,202 @@ +<chapter xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-common-env"> + +<title>Common Environment Variables</title> + + +<para>Most Nix commands interpret the following environment variables:</para> + +<variablelist xml:id="env-common"> + +<varlistentry><term><envar>IN_NIX_SHELL</envar></term> + + <listitem><para>Indicator that tells if the current environment was set up by + <command>nix-shell</command>. Since Nix 2.0 the values are + <literal>"pure"</literal> and <literal>"impure"</literal></para></listitem> + +</varlistentry> + +<varlistentry xml:id="env-NIX_PATH"><term><envar>NIX_PATH</envar></term> + + <listitem> + + <para>A colon-separated list of directories used to look up Nix + expressions enclosed in angle brackets (i.e., + <literal><<replaceable>path</replaceable>></literal>). For + instance, the value + + <screen> +/home/eelco/Dev:/etc/nixos</screen> + + will cause Nix to look for paths relative to + <filename>/home/eelco/Dev</filename> and + <filename>/etc/nixos</filename>, in that order. It is also + possible to match paths against a prefix. For example, the value + + <screen> +nixpkgs=/home/eelco/Dev/nixpkgs-branch:/etc/nixos</screen> + + will cause Nix to search for + <literal><nixpkgs/<replaceable>path</replaceable>></literal> in + <filename>/home/eelco/Dev/nixpkgs-branch/<replaceable>path</replaceable></filename> + and + <filename>/etc/nixos/nixpkgs/<replaceable>path</replaceable></filename>.</para> + + <para>If a path in the Nix search path starts with + <literal>http://</literal> or <literal>https://</literal>, it is + interpreted as the URL of a tarball that will be downloaded and + unpacked to a temporary location. The tarball must consist of a + single top-level directory. For example, setting + <envar>NIX_PATH</envar> to + + <screen> +nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/nixos-15.09.tar.gz</screen> + + tells Nix to download the latest revision in the Nixpkgs/NixOS + 15.09 channel.</para> + + <para>A following shorthand can be used to refer to the official channels: + + <screen>nixpkgs=channel:nixos-15.09</screen> + </para> + + <para>The search path can be extended using the <option + linkend="opt-I">-I</option> option, which takes precedence over + <envar>NIX_PATH</envar>.</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_IGNORE_SYMLINK_STORE</envar></term> + + <listitem> + + <para>Normally, the Nix store directory (typically + <filename>/nix/store</filename>) is not allowed to contain any + symlink components. This is to prevent “impure” builds. Builders + sometimes “canonicalise” paths by resolving all symlink components. + Thus, builds on different machines (with + <filename>/nix/store</filename> resolving to different locations) + could yield different results. This is generally not a problem, + except when builds are deployed to machines where + <filename>/nix/store</filename> resolves differently. If you are + sure that you’re not going to do that, you can set + <envar>NIX_IGNORE_SYMLINK_STORE</envar> to <envar>1</envar>.</para> + + <para>Note that if you’re symlinking the Nix store so that you can + put it on another file system than the root file system, on Linux + you’re better off using <literal>bind</literal> mount points, e.g., + + <screen> +$ mkdir /nix +$ mount -o bind /mnt/otherdisk/nix /nix</screen> + + Consult the <citerefentry><refentrytitle>mount</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> manual page for details.</para> + + </listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_STORE_DIR</envar></term> + + <listitem><para>Overrides the location of the Nix store (default + <filename><replaceable>prefix</replaceable>/store</filename>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_DATA_DIR</envar></term> + + <listitem><para>Overrides the location of the Nix static data + directory (default + <filename><replaceable>prefix</replaceable>/share</filename>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_LOG_DIR</envar></term> + + <listitem><para>Overrides the location of the Nix log directory + (default <filename><replaceable>prefix</replaceable>/var/log/nix</filename>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_STATE_DIR</envar></term> + + <listitem><para>Overrides the location of the Nix state directory + (default <filename><replaceable>prefix</replaceable>/var/nix</filename>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_CONF_DIR</envar></term> + + <listitem><para>Overrides the location of the Nix configuration + directory (default + <filename><replaceable>prefix</replaceable>/etc/nix</filename>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>TMPDIR</envar></term> + + <listitem><para>Use the specified directory to store temporary + files. In particular, this includes temporary build directories; + these can take up substantial amounts of disk space. The default is + <filename>/tmp</filename>.</para></listitem> + +</varlistentry> + + +<varlistentry xml:id="envar-remote"><term><envar>NIX_REMOTE</envar></term> + + <listitem><para>This variable should be set to + <literal>daemon</literal> if you want to use the Nix daemon to + execute Nix operations. This is necessary in <link + linkend="ssec-multi-user">multi-user Nix installations</link>. + If the Nix daemon's Unix socket is at some non-standard path, + this variable should be set to <literal>unix://path/to/socket</literal>. + Otherwise, it should be left unset.</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_SHOW_STATS</envar></term> + + <listitem><para>If set to <literal>1</literal>, Nix will print some + evaluation statistics, such as the number of values + allocated.</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>NIX_COUNT_CALLS</envar></term> + + <listitem><para>If set to <literal>1</literal>, Nix will print how + often functions were called during Nix expression evaluation. This + is useful for profiling your Nix expressions.</para></listitem> + +</varlistentry> + + +<varlistentry><term><envar>GC_INITIAL_HEAP_SIZE</envar></term> + + <listitem><para>If Nix has been configured to use the Boehm garbage + collector, this variable sets the initial size of the heap in bytes. + It defaults to 384 MiB. Setting it to a low value reduces memory + consumption, but will increase runtime due to the overhead of + garbage collection.</para></listitem> + +</varlistentry> + + +</variablelist> + + +</chapter> diff --git a/third_party/nix/doc/manual/command-ref/files.xml b/third_party/nix/doc/manual/command-ref/files.xml new file mode 100644 index 000000000000..7bbc96e89982 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/files.xml @@ -0,0 +1,14 @@ +<chapter xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id='ch-files'> + +<title>Files</title> + +<para>This section lists configuration files that you can use when you +work with Nix.</para> + +<xi:include href="conf-file.xml" /> + +</chapter> \ No newline at end of file diff --git a/third_party/nix/doc/manual/command-ref/main-commands.xml b/third_party/nix/doc/manual/command-ref/main-commands.xml new file mode 100644 index 000000000000..0f4169243ca9 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/main-commands.xml @@ -0,0 +1,17 @@ +<chapter xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id='ch-main-commands'> + +<title>Main Commands</title> + +<para>This section lists commands and options that you can use when you +work with Nix.</para> + +<xi:include href="nix-env.xml" /> +<xi:include href="nix-build.xml" /> +<xi:include href="nix-shell.xml" /> +<xi:include href="nix-store.xml" /> + +</chapter> \ No newline at end of file diff --git a/third_party/nix/doc/manual/command-ref/nix-build.xml b/third_party/nix/doc/manual/command-ref/nix-build.xml new file mode 100644 index 000000000000..c1b783c87d6d --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-build.xml @@ -0,0 +1,190 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-build"> + +<refmeta> + <refentrytitle>nix-build</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-build</refname> + <refpurpose>build a Nix expression</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-build</command> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-common-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <arg><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg><option>--argstr</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + <replaceable>attrPath</replaceable> + </arg> + <arg><option>--no-out-link</option></arg> + <arg><option>--dry-run</option></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--out-link</option></arg> + <arg choice='plain'><option>-o</option></arg> + </group> + <replaceable>outlink</replaceable> + </arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + +<refsection><title>Description</title> + +<para>The <command>nix-build</command> command builds the derivations +described by the Nix expressions in <replaceable>paths</replaceable>. +If the build succeeds, it places a symlink to the result in the +current directory. The symlink is called <filename>result</filename>. +If there are multiple Nix expressions, or the Nix expressions evaluate +to multiple derivations, multiple sequentially numbered symlinks are +created (<filename>result</filename>, <filename>result-2</filename>, +and so on).</para> + +<para>If no <replaceable>paths</replaceable> are specified, then +<command>nix-build</command> will use <filename>default.nix</filename> +in the current directory, if it exists.</para> + +<para>If an element of <replaceable>paths</replaceable> starts with +<literal>http://</literal> or <literal>https://</literal>, it is +interpreted as the URL of a tarball that will be downloaded and +unpacked to a temporary location. The tarball must include a single +top-level directory containing at least a file named +<filename>default.nix</filename>.</para> + +<para><command>nix-build</command> is essentially a wrapper around +<link +linkend="sec-nix-instantiate"><command>nix-instantiate</command></link> +(to translate a high-level Nix expression to a low-level store +derivation) and <link +linkend="rsec-nix-store-realise"><command>nix-store +--realise</command></link> (to build the store derivation).</para> + +<warning><para>The result of the build is automatically registered as +a root of the Nix garbage collector. This root disappears +automatically when the <filename>result</filename> symlink is deleted +or renamed. So don’t rename the symlink.</para></warning> + +</refsection> + + +<refsection><title>Options</title> + +<para>All options not listed here are passed to <command>nix-store +--realise</command>, except for <option>--arg</option> and +<option>--attr</option> / <option>-A</option> which are passed to +<command>nix-instantiate</command>. <phrase condition="manual">See +also <xref linkend="sec-common-options" />.</phrase></para> + +<variablelist> + + <varlistentry><term><option>--no-out-link</option></term> + + <listitem><para>Do not create a symlink to the output path. Note + that as a result the output does not become a root of the garbage + collector, and so might be deleted by <command>nix-store + --gc</command>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--dry-run</option></term> + <listitem><para>Show what store paths would be built or downloaded</para></listitem> + </varlistentry> + + <varlistentry xml:id='opt-out-link'><term><option>--out-link</option> / + <option>-o</option> <replaceable>outlink</replaceable></term> + + <listitem><para>Change the name of the symlink to the output path + created from <filename>result</filename> to + <replaceable>outlink</replaceable>.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>The following common options are supported:</para> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-build '<nixpkgs>' -A firefox +store derivation is /nix/store/qybprl8sz2lc...-firefox-1.5.0.7.drv +/nix/store/d18hyl92g30l...-firefox-1.5.0.7 + +$ ls -l result +lrwxrwxrwx <replaceable>...</replaceable> result -> /nix/store/d18hyl92g30l...-firefox-1.5.0.7 + +$ ls ./result/bin/ +firefox firefox-config</screen> + +<para>If a derivation has multiple outputs, +<command>nix-build</command> will build the default (first) output. +You can also build all outputs: +<screen> +$ nix-build '<nixpkgs>' -A openssl.all +</screen> +This will create a symlink for each output named +<filename>result-<replaceable>outputname</replaceable></filename>. +The suffix is omitted if the output name is <literal>out</literal>. +So if <literal>openssl</literal> has outputs <literal>out</literal>, +<literal>bin</literal> and <literal>man</literal>, +<command>nix-build</command> will create symlinks +<literal>result</literal>, <literal>result-bin</literal> and +<literal>result-man</literal>. It’s also possible to build a specific +output: +<screen> +$ nix-build '<nixpkgs>' -A openssl.man +</screen> +This will create a symlink <literal>result-man</literal>.</para> + +<para>Build a Nix expression given on the command line: + +<screen> +$ nix-build -E 'with import <nixpkgs> { }; runCommand "foo" { } "echo bar > $out"' +$ cat ./result +bar +</screen> + +</para> + +<para>Build the GNU Hello package from the latest revision of the +master branch of Nixpkgs: + +<screen> +$ nix-build https://github.com/NixOS/nixpkgs/archive/master.tar.gz -A hello +</screen> + +</para> + +</refsection> + + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-channel.xml b/third_party/nix/doc/manual/command-ref/nix-channel.xml new file mode 100644 index 000000000000..5a2866e6bc4b --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-channel.xml @@ -0,0 +1,178 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-channel"> + +<refmeta> + <refentrytitle>nix-channel</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-channel</refname> + <refpurpose>manage Nix channels</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-channel</command> + <group choice='req'> + <arg choice='plain'><option>--add</option> <replaceable>url</replaceable> <arg choice='opt'><replaceable>name</replaceable></arg></arg> + <arg choice='plain'><option>--remove</option> <replaceable>name</replaceable></arg> + <arg choice='plain'><option>--list</option></arg> + <arg choice='plain'><option>--update</option> <arg rep='repeat'><replaceable>names</replaceable></arg></arg> + <arg choice='plain'><option>--rollback</option> <arg choice='opt'><replaceable>generation</replaceable></arg></arg> + </group> + </cmdsynopsis> +</refsynopsisdiv> + +<refsection><title>Description</title> + +<para>A Nix channel is a mechanism that allows you to automatically +stay up-to-date with a set of pre-built Nix expressions. A Nix +channel is just a URL that points to a place containing a set of Nix +expressions. <phrase condition="manual">See also <xref +linkend="sec-channels" />.</phrase></para> + +<para>This command has the following operations: + +<variablelist> + + <varlistentry><term><option>--add</option> <replaceable>url</replaceable> [<replaceable>name</replaceable>]</term> + + <listitem><para>Adds a channel named + <replaceable>name</replaceable> with URL + <replaceable>url</replaceable> to the list of subscribed channels. + If <replaceable>name</replaceable> is omitted, it defaults to the + last component of <replaceable>url</replaceable>, with the + suffixes <literal>-stable</literal> or + <literal>-unstable</literal> removed.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--remove</option> <replaceable>name</replaceable></term> + + <listitem><para>Removes the channel named + <replaceable>name</replaceable> from the list of subscribed + channels.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--list</option></term> + + <listitem><para>Prints the names and URLs of all subscribed + channels on standard output.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--update</option> [<replaceable>names</replaceable>…]</term> + + <listitem><para>Downloads the Nix expressions of all subscribed + channels (or only those included in + <replaceable>names</replaceable> if specified) and makes them the + default for <command>nix-env</command> operations (by symlinking + them from the directory + <filename>~/.nix-defexpr</filename>).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--rollback</option> [<replaceable>generation</replaceable>]</term> + + <listitem><para>Reverts the previous call to <command>nix-channel + --update</command>. Optionally, you can specify a specific channel + generation number to restore.</para></listitem> + + </varlistentry> + +</variablelist> + +</para> + +<para>Note that <option>--add</option> does not automatically perform +an update.</para> + +<para>The list of subscribed channels is stored in +<filename>~/.nix-channels</filename>.</para> + +</refsection> + +<refsection><title>Examples</title> + +<para>To subscribe to the Nixpkgs channel and install the GNU Hello package:</para> + +<screen> +$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable +$ nix-channel --update +$ nix-env -iA nixpkgs.hello</screen> + +<para>You can revert channel updates using <option>--rollback</option>:</para> + +<screen> +$ nix-instantiate --eval -E '(import <nixpkgs> {}).lib.nixpkgsVersion' +"14.04.527.0e935f1" + +$ nix-channel --rollback +switching from generation 483 to 482 + +$ nix-instantiate --eval -E '(import <nixpkgs> {}).lib.nixpkgsVersion' +"14.04.526.dbadfad" +</screen> + +</refsection> + +<refsection><title>Files</title> + +<variablelist> + + <varlistentry><term><filename>/nix/var/nix/profiles/per-user/<replaceable>username</replaceable>/channels</filename></term> + + <listitem><para><command>nix-channel</command> uses a + <command>nix-env</command> profile to keep track of previous + versions of the subscribed channels. Every time you run + <command>nix-channel --update</command>, a new channel generation + (that is, a symlink to the channel Nix expressions in the Nix store) + is created. This enables <command>nix-channel --rollback</command> + to revert to previous versions.</para></listitem> + + </varlistentry> + + <varlistentry><term><filename>~/.nix-defexpr/channels</filename></term> + + <listitem><para>This is a symlink to + <filename>/nix/var/nix/profiles/per-user/<replaceable>username</replaceable>/channels</filename>. It + ensures that <command>nix-env</command> can find your channels. In + a multi-user installation, you may also have + <filename>~/.nix-defexpr/channels_root</filename>, which links to + the channels of the root user.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + +<refsection><title>Channel format</title> + +<para>A channel URL should point to a directory containing the +following files:</para> + +<variablelist> + + <varlistentry><term><filename>nixexprs.tar.xz</filename></term> + + <listitem><para>A tarball containing Nix expressions and files + referenced by them (such as build scripts and patches). At the + top level, the tarball should contain a single directory. That + directory must contain a file <filename>default.nix</filename> + that serves as the channel’s “entry point”.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-collect-garbage.xml b/third_party/nix/doc/manual/command-ref/nix-collect-garbage.xml new file mode 100644 index 000000000000..43e06879691c --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-collect-garbage.xml @@ -0,0 +1,63 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-collect-garbage"> + +<refmeta> + <refentrytitle>nix-collect-garbage</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-collect-garbage</refname> + <refpurpose>delete unreachable store paths</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-collect-garbage</command> + <arg><option>--delete-old</option></arg> + <arg><option>-d</option></arg> + <arg><option>--delete-older-than</option> <replaceable>period</replaceable></arg> + <arg><option>--max-freed</option> <replaceable>bytes</replaceable></arg> + <arg><option>--dry-run</option></arg> + </cmdsynopsis> +</refsynopsisdiv> + +<refsection><title>Description</title> + +<para>The command <command>nix-collect-garbage</command> is mostly an +alias of <link linkend="rsec-nix-store-gc"><command>nix-store +--gc</command></link>, that is, it deletes all unreachable paths in +the Nix store to clean up your system. However, it provides two +additional options: <option>-d</option> (<option>--delete-old</option>), +which deletes all old generations of all profiles in +<filename>/nix/var/nix/profiles</filename> by invoking +<literal>nix-env --delete-generations old</literal> on all profiles +(of course, this makes rollbacks to previous configurations +impossible); and +<option>--delete-older-than</option> <replaceable>period</replaceable>, +where period is a value such as <literal>30d</literal>, which deletes +all generations older than the specified number of days in all profiles +in <filename>/nix/var/nix/profiles</filename> (except for the generations +that were active at that point in time). +</para> + +</refsection> + +<refsection><title>Example</title> + +<para>To delete from the Nix store everything that is not used by the +current generations of each profile, do + +<screen> +$ nix-collect-garbage -d</screen> + +</para> + +</refsection> + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-copy-closure.xml b/third_party/nix/doc/manual/command-ref/nix-copy-closure.xml new file mode 100644 index 000000000000..e6dcf180ad69 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-copy-closure.xml @@ -0,0 +1,169 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + xml:id="sec-nix-copy-closure"> + +<refmeta> + <refentrytitle>nix-copy-closure</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-copy-closure</refname> + <refpurpose>copy a closure to or from a remote machine via SSH</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-copy-closure</command> + <group> + <arg choice='plain'><option>--to</option></arg> + <arg choice='plain'><option>--from</option></arg> + </group> + <arg><option>--gzip</option></arg> + <!-- + <arg><option>- -show-progress</option></arg> + --> + <arg><option>--include-outputs</option></arg> + <group> + <arg choice='plain'><option>--use-substitutes</option></arg> + <arg choice='plain'><option>-s</option></arg> + </group> + <arg><option>-v</option></arg> + <arg choice='plain'> + <replaceable>user@</replaceable><replaceable>machine</replaceable> + </arg> + <arg choice='plain'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para><command>nix-copy-closure</command> gives you an easy and +efficient way to exchange software between machines. Given one or +more Nix store <replaceable>paths</replaceable> on the local +machine, <command>nix-copy-closure</command> computes the closure of +those paths (i.e. all their dependencies in the Nix store), and copies +all paths in the closure to the remote machine via the +<command>ssh</command> (Secure Shell) command. With the +<option>--from</option>, the direction is reversed: +the closure of <replaceable>paths</replaceable> on a remote machine is +copied to the Nix store on the local machine.</para> + +<para>This command is efficient because it only sends the store paths +that are missing on the target machine.</para> + +<para>Since <command>nix-copy-closure</command> calls +<command>ssh</command>, you may be asked to type in the appropriate +password or passphrase. In fact, you may be asked +<emphasis>twice</emphasis> because <command>nix-copy-closure</command> +currently connects twice to the remote machine, first to get the set +of paths missing on the target machine, and second to send the dump of +those paths. If this bothers you, use +<command>ssh-agent</command>.</para> + + +<refsection><title>Options</title> + +<variablelist> + + <varlistentry><term><option>--to</option></term> + + <listitem><para>Copy the closure of + <replaceable>paths</replaceable> from the local Nix store to the + Nix store on <replaceable>machine</replaceable>. This is the + default.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--from</option></term> + + <listitem><para>Copy the closure of + <replaceable>paths</replaceable> from the Nix store on + <replaceable>machine</replaceable> to the local Nix + store.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--gzip</option></term> + + <listitem><para>Enable compression of the SSH + connection.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--include-outputs</option></term> + + <listitem><para>Also copy the outputs of store derivations + included in the closure.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--use-substitutes</option> / <option>-s</option></term> + + <listitem><para>Attempt to download missing paths on the target + machine using Nix’s substitute mechanism. Any paths that cannot + be substituted on the target are still copied normally from the + source. This is useful, for instance, if the connection between + the source and target machine is slow, but the connection between + the target machine and <literal>nixos.org</literal> (the default + binary cache server) is fast.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>-v</option></term> + + <listitem><para>Show verbose output.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Environment variables</title> + +<variablelist> + + <varlistentry><term><envar>NIX_SSHOPTS</envar></term> + + <listitem><para>Additional options to be passed to + <command>ssh</command> on the command line.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>Copy Firefox with all its dependencies to a remote machine: + +<screen> +$ nix-copy-closure --to alice@itchy.labs $(type -tP firefox)</screen> + +</para> + +<para>Copy Subversion from a remote machine and then install it into a +user environment: + +<screen> +$ nix-copy-closure --from alice@itchy.labs \ + /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4 +$ nix-env -i /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4 +</screen> + +</para> + +</refsection> + + +</refsection> + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-daemon.xml b/third_party/nix/doc/manual/command-ref/nix-daemon.xml new file mode 100644 index 000000000000..a2161f033470 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-daemon.xml @@ -0,0 +1,35 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-daemon"> + +<refmeta> + <refentrytitle>nix-daemon</refentrytitle> + <manvolnum>8</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-daemon</refname> + <refpurpose>Nix multi-user support daemon</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-daemon</command> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The Nix daemon is necessary in multi-user Nix installations. It +performs build actions and other operations on the Nix store on behalf +of unprivileged users.</para> + + +</refsection> + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-env.xml b/third_party/nix/doc/manual/command-ref/nix-env.xml new file mode 100644 index 000000000000..d257a5e49c70 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-env.xml @@ -0,0 +1,1505 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-env"> + +<refmeta> + <refentrytitle>nix-env</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-env</refname> + <refpurpose>manipulate or query Nix user environments</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-env</command> + <xi:include href="opt-common-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <arg><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg><option>--argstr</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--file</option></arg> + <arg choice='plain'><option>-f</option></arg> + </group> + <replaceable>path</replaceable> + </arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--profile</option></arg> + <arg choice='plain'><option>-p</option></arg> + </group> + <replaceable>path</replaceable> + </arg> + <arg> + <arg choice='plain'><option>--system-filter</option></arg> + <replaceable>system</replaceable> + </arg> + <arg><option>--dry-run</option></arg> + <arg choice='plain'><replaceable>operation</replaceable></arg> + <arg rep='repeat'><replaceable>options</replaceable></arg> + <arg rep='repeat'><replaceable>arguments</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The command <command>nix-env</command> is used to manipulate Nix +user environments. User environments are sets of software packages +available to a user at some point in time. In other words, they are a +synthesised view of the programs available in the Nix store. There +may be many user environments: different users can have different +environments, and individual users can switch between different +environments.</para> + +<para><command>nix-env</command> takes exactly one +<emphasis>operation</emphasis> flag which indicates the subcommand to +be performed. These are documented below.</para> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Selectors</title> + +<para>Several commands, such as <command>nix-env -q</command> and +<command>nix-env -i</command>, take a list of arguments that specify +the packages on which to operate. These are extended regular +expressions that must match the entire name of the package. (For +details on regular expressions, see +<citerefentry><refentrytitle>regex</refentrytitle><manvolnum>7</manvolnum></citerefentry>.) +The match is case-sensitive. The regular expression can optionally be +followed by a dash and a version number; if omitted, any version of +the package will match. Here are some examples: + +<variablelist> + + <varlistentry> + <term><literal>firefox</literal></term> + <listitem><para>Matches the package name + <literal>firefox</literal> and any version.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>firefox-32.0</literal></term> + <listitem><para>Matches the package name + <literal>firefox</literal> and version + <literal>32.0</literal>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>gtk\\+</literal></term> + <listitem><para>Matches the package name + <literal>gtk+</literal>. The <literal>+</literal> character must + be escaped using a backslash to prevent it from being interpreted + as a quantifier, and the backslash must be escaped in turn with + another backslash to ensure that the shell passes it + on.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>.\*</literal></term> + <listitem><para>Matches any package name. This is the default for + most commands.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>'.*zip.*'</literal></term> + <listitem><para>Matches any package name containing the string + <literal>zip</literal>. Note the dots: <literal>'*zip*'</literal> + does not work, because in a regular expression, the character + <literal>*</literal> is interpreted as a + quantifier.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>'.*(firefox|chromium).*'</literal></term> + <listitem><para>Matches any package name containing the strings + <literal>firefox</literal> or + <literal>chromium</literal>.</para></listitem> + </varlistentry> + +</variablelist> + +</para> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Common options</title> + +<para>This section lists the options that are common to all +operations. These options are allowed for every subcommand, though +they may not always have an effect. <phrase condition="manual">See +also <xref linkend="sec-common-options" />.</phrase></para> + +<variablelist> + + <varlistentry><term><option>--file</option> / <option>-f</option> <replaceable>path</replaceable></term> + + <listitem><para>Specifies the Nix expression (designated below as + the <emphasis>active Nix expression</emphasis>) used by the + <option>--install</option>, <option>--upgrade</option>, and + <option>--query --available</option> operations to obtain + derivations. The default is + <filename>~/.nix-defexpr</filename>.</para> + + <para>If the argument starts with <literal>http://</literal> or + <literal>https://</literal>, it is interpreted as the URL of a + tarball that will be downloaded and unpacked to a temporary + location. The tarball must include a single top-level directory + containing at least a file named <filename>default.nix</filename>.</para> + + </listitem> + + </varlistentry> + + <varlistentry><term><option>--profile</option> / <option>-p</option> <replaceable>path</replaceable></term> + + <listitem><para>Specifies the profile to be used by those + operations that operate on a profile (designated below as the + <emphasis>active profile</emphasis>). A profile is a sequence of + user environments called <emphasis>generations</emphasis>, one of + which is the <emphasis>current + generation</emphasis>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--dry-run</option></term> + + <listitem><para>For the <option>--install</option>, + <option>--upgrade</option>, <option>--uninstall</option>, + <option>--switch-generation</option>, + <option>--delete-generations</option> and + <option>--rollback</option> operations, this flag will cause + <command>nix-env</command> to print what + <emphasis>would</emphasis> be done if this flag had not been + specified, without actually doing it.</para> + + <para><option>--dry-run</option> also prints out which paths will + be <link linkend="gloss-substitute">substituted</link> (i.e., + downloaded) and which paths will be built from source (because no + substitute is available).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--system-filter</option> <replaceable>system</replaceable></term> + + <listitem><para>By default, operations such as <option>--query + --available</option> show derivations matching any platform. This + option allows you to use derivations for the specified platform + <replaceable>system</replaceable>.</para></listitem> + + </varlistentry> + +</variablelist> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Files</title> + +<variablelist> + + <varlistentry><term><filename>~/.nix-defexpr</filename></term> + + <listitem><para>The source for the default Nix + expressions used by the <option>--install</option>, + <option>--upgrade</option>, and <option>--query + --available</option> operations to obtain derivations. The + <option>--file</option> option may be used to override this + default.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a file, + it is loaded as a Nix expression. If the expression + is a set, it is used as the default Nix expression. + If the expression is a function, an empty set is passed + as argument and the return value is used as + the default Nix expression.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a directory + containing a <filename>default.nix</filename> file, that file + is loaded as in the above paragraph.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a directory without + a <filename>default.nix</filename> file, then its contents + (both files and subdirectories) are loaded as Nix expressions. + The expressions are combined into a single set, each expression + under an attribute with the same name as the original file + or subdirectory. + </para> + + <para>For example, if <filename>~/.nix-defexpr</filename> contains + two files, <filename>foo.nix</filename> and <filename>bar.nix</filename>, + then the default Nix expression will essentially be + +<programlisting> +{ + foo = import ~/.nix-defexpr/foo.nix; + bar = import ~/.nix-defexpr/bar.nix; +}</programlisting> + + </para> + + <para>The file <filename>manifest.nix</filename> is always ignored. + Subdirectories without a <filename>default.nix</filename> file + are traversed recursively in search of more Nix expressions, + but the names of these intermediate directories are not + added to the attribute paths of the default Nix expression.</para> + + <para>The command <command>nix-channel</command> places symlinks + to the downloaded Nix expressions from each subscribed channel in + this directory.</para> + </listitem> + + </varlistentry> + + <varlistentry><term><filename>~/.nix-profile</filename></term> + + <listitem><para>A symbolic link to the user's current profile. By + default, this symlink points to + <filename><replaceable>prefix</replaceable>/var/nix/profiles/default</filename>. + The <envar>PATH</envar> environment variable should include + <filename>~/.nix-profile/bin</filename> for the user environment + to be visible to the user.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-install"><title>Operation <option>--install</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--install</option></arg> + <arg choice='plain'><option>-i</option></arg> + </group> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-inst-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <group choice='opt'> + <arg choice='plain'><option>--preserve-installed</option></arg> + <arg choice='plain'><option>-P</option></arg> + </group> + <group choice='opt'> + <arg choice='plain'><option>--remove-all</option></arg> + <arg choice='plain'><option>-r</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>args</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>The install operation creates a new user environment, based on +the current generation of the active profile, to which a set of store +paths described by <replaceable>args</replaceable> is added. The +arguments <replaceable>args</replaceable> map to store paths in a +number of possible ways: + +<itemizedlist> + + <listitem><para>By default, <replaceable>args</replaceable> is a set + of derivation names denoting derivations in the active Nix + expression. These are realised, and the resulting output paths are + installed. Currently installed derivations with a name equal to the + name of a derivation being added are removed unless the option + <option>--preserve-installed</option> is + specified.</para> + + <para>If there are multiple derivations matching a name in + <replaceable>args</replaceable> that have the same name (e.g., + <literal>gcc-3.3.6</literal> and <literal>gcc-4.1.1</literal>), then + the derivation with the highest <emphasis>priority</emphasis> is + used. A derivation can define a priority by declaring the + <varname>meta.priority</varname> attribute. This attribute should + be a number, with a higher value denoting a lower priority. The + default priority is <literal>0</literal>.</para> + + <para>If there are multiple matching derivations with the same + priority, then the derivation with the highest version will be + installed.</para> + + <para>You can force the installation of multiple derivations with + the same name by being specific about the versions. For instance, + <literal>nix-env -i gcc-3.3.6 gcc-4.1.1</literal> will install both + version of GCC (and will probably cause a user environment + conflict!).</para></listitem> + + <listitem><para>If <link + linkend='opt-attr'><option>--attr</option></link> + (<option>-A</option>) is specified, the arguments are + <emphasis>attribute paths</emphasis> that select attributes from the + top-level Nix expression. This is faster than using derivation + names and unambiguous. To find out the attribute paths of available + packages, use <literal>nix-env -qaP</literal>.</para></listitem> + + <listitem><para>If <option>--from-profile</option> + <replaceable>path</replaceable> is given, + <replaceable>args</replaceable> is a set of names denoting installed + store paths in the profile <replaceable>path</replaceable>. This is + an easy way to copy user environment elements from one profile to + another.</para></listitem> + + <listitem><para>If <option>--from-expression</option> is given, + <replaceable>args</replaceable> are Nix <link + linkend="ss-functions">functions</link> that are called with the + active Nix expression as their single argument. The derivations + returned by those function calls are installed. This allows + derivations to be specified in an unambiguous way, which is necessary + if there are multiple derivations with the same + name.</para></listitem> + + <listitem><para>If <replaceable>args</replaceable> are store + derivations, then these are <link + linkend="rsec-nix-store-realise">realised</link>, and the resulting + output paths are installed.</para></listitem> + + <listitem><para>If <replaceable>args</replaceable> are store paths + that are not store derivations, then these are <link + linkend="rsec-nix-store-realise">realised</link> and + installed.</para></listitem> + + <listitem><para>By default all outputs are installed for each derivation. + That can be reduced by setting <literal>meta.outputsToInstall</literal>. + </para></listitem> <!-- TODO: link nixpkgs docs on the ability to override those. --> + +</itemizedlist> + +</para> + +</refsection> + + +<refsection><title>Flags</title> + +<variablelist> + + <varlistentry><term><option>--prebuilt-only</option> / <option>-b</option></term> + + <listitem><para>Use only derivations for which a substitute is + registered, i.e., there is a pre-built binary available that can + be downloaded in lieu of building the derivation. Thus, no + packages will be built from source.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--preserve-installed</option></term> + <term><option>-P</option></term> + + <listitem><para>Do not remove derivations with a name matching one + of the derivations being installed. Usually, trying to have two + versions of the same package installed in the same generation of a + profile will lead to an error in building the generation, due to + file name clashes between the two versions. However, this is not + the case for all packages.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--remove-all</option></term> + <term><option>-r</option></term> + + <listitem><para>Remove all previously installed packages first. + This is equivalent to running <literal>nix-env -e '.*'</literal> + first, except that everything happens in a single + transaction.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection xml:id='refsec-nix-env-install-examples'><title>Examples</title> + +<para>To install a specific version of <command>gcc</command> from the +active Nix expression: + +<screen> +$ nix-env --install gcc-3.3.2 +installing `gcc-3.3.2' +uninstalling `gcc-3.1'</screen> + +Note the previously installed version is removed, since +<option>--preserve-installed</option> was not specified.</para> + +<para>To install an arbitrary version: + +<screen> +$ nix-env --install gcc +installing `gcc-3.3.2'</screen> + +</para> + +<para>To install using a specific attribute: + +<screen> +$ nix-env -i -A gcc40mips +$ nix-env -i -A xorg.xorgserver</screen> + +</para> + +<para>To install all derivations in the Nix expression <filename>foo.nix</filename>: + +<screen> +$ nix-env -f ~/foo.nix -i '.*'</screen> + +</para> + +<para>To copy the store path with symbolic name <literal>gcc</literal> +from another profile: + +<screen> +$ nix-env -i --from-profile /nix/var/nix/profiles/foo gcc</screen> + +</para> + +<para>To install a specific store derivation (typically created by +<command>nix-instantiate</command>): + +<screen> +$ nix-env -i /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv</screen> + +</para> + +<para>To install a specific output path: + +<screen> +$ nix-env -i /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3</screen> + +</para> + +<para>To install from a Nix expression specified on the command-line: + +<screen> +$ nix-env -f ./foo.nix -i -E \ + 'f: (f {system = "i686-linux";}).subversionWithJava'</screen> + +I.e., this evaluates to <literal>(f: (f {system = +"i686-linux";}).subversionWithJava) (import ./foo.nix)</literal>, thus +selecting the <literal>subversionWithJava</literal> attribute from the +set returned by calling the function defined in +<filename>./foo.nix</filename>.</para> + +<para>A dry-run tells you which paths will be downloaded or built from +source: + +<screen> +$ nix-env -f '<nixpkgs>' -iA hello --dry-run +(dry run; not doing anything) +installing ‘hello-2.10’ +these paths will be fetched (0.04 MiB download, 0.19 MiB unpacked): + /nix/store/wkhdf9jinag5750mqlax6z2zbwhqb76n-hello-2.10 + <replaceable>...</replaceable></screen> + +</para> + +<para>To install Firefox from the latest revision in the Nixpkgs/NixOS +14.12 channel: + +<screen> +$ nix-env -f https://github.com/NixOS/nixpkgs-channels/archive/nixos-14.12.tar.gz -iA firefox +</screen> + +(The GitHub repository <literal>nixpkgs-channels</literal> is updated +automatically from the main <literal>nixpkgs</literal> repository +after certain tests have succeeded and binaries have been built and +uploaded to the binary cache at <uri>cache.nixos.org</uri>.)</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-upgrade"><title>Operation <option>--upgrade</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--upgrade</option></arg> + <arg choice='plain'><option>-u</option></arg> + </group> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-inst-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <group choice='opt'> + <arg choice='plain'><option>--lt</option></arg> + <arg choice='plain'><option>--leq</option></arg> + <arg choice='plain'><option>--eq</option></arg> + <arg choice='plain'><option>--always</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>args</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The upgrade operation creates a new user environment, based on +the current generation of the active profile, in which all store paths +are replaced for which there are newer versions in the set of paths +described by <replaceable>args</replaceable>. Paths for which there +are no newer versions are left untouched; this is not an error. It is +also not an error if an element of <replaceable>args</replaceable> +matches no installed derivations.</para> + +<para>For a description of how <replaceable>args</replaceable> is +mapped to a set of store paths, see <link +linkend="rsec-nix-env-install"><option>--install</option></link>. If +<replaceable>args</replaceable> describes multiple store paths with +the same symbolic name, only the one with the highest version is +installed.</para> + +</refsection> + +<refsection><title>Flags</title> + +<variablelist> + + <varlistentry><term><option>--lt</option></term> + + <listitem><para>Only upgrade a derivation to newer versions. This + is the default.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--leq</option></term> + + <listitem><para>In addition to upgrading to newer versions, also + “upgrade” to derivations that have the same version. Version are + not a unique identification of a derivation, so there may be many + derivations that have the same version. This flag may be useful + to force “synchronisation” between the installed and available + derivations.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--eq</option></term> + + <listitem><para><emphasis>Only</emphasis> “upgrade” to derivations + that have the same version. This may not seem very useful, but it + actually is, e.g., when there is a new release of Nixpkgs and you + want to replace installed applications with the same versions + built against newer dependencies (to reduce the number of + dependencies floating around on your system).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--always</option></term> + + <listitem><para>In addition to upgrading to newer versions, also + “upgrade” to derivations that have the same or a lower version. + I.e., derivations may actually be downgraded depending on what is + available in the active Nix expression.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>For the other flags, see <option +linkend="rsec-nix-env-install">--install</option>.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --upgrade gcc +upgrading `gcc-3.3.1' to `gcc-3.4' + +$ nix-env -u gcc-3.3.2 --always <lineannotation>(switch to a specific version)</lineannotation> +upgrading `gcc-3.4' to `gcc-3.3.2' + +$ nix-env --upgrade pan +<lineannotation>(no upgrades available, so nothing happens)</lineannotation> + +$ nix-env -u <lineannotation>(try to upgrade everything)</lineannotation> +upgrading `hello-2.1.2' to `hello-2.1.3' +upgrading `mozilla-1.2' to `mozilla-1.4'</screen> + +</refsection> + +<refsection xml:id="ssec-version-comparisons"><title>Versions</title> + +<para>The upgrade operation determines whether a derivation +<varname>y</varname> is an upgrade of a derivation +<varname>x</varname> by looking at their respective +<literal>name</literal> attributes. The names (e.g., +<literal>gcc-3.3.1</literal> are split into two parts: the package +name (<literal>gcc</literal>), and the version +(<literal>3.3.1</literal>). The version part starts after the first +dash not followed by a letter. <varname>x</varname> is considered an +upgrade of <varname>y</varname> if their package names match, and the +version of <varname>y</varname> is higher that that of +<varname>x</varname>.</para> + +<para>The versions are compared by splitting them into contiguous +components of numbers and letters. E.g., <literal>3.3.1pre5</literal> +is split into <literal>[3, 3, 1, "pre", 5]</literal>. These lists are +then compared lexicographically (from left to right). Corresponding +components <varname>a</varname> and <varname>b</varname> are compared +as follows. If they are both numbers, integer comparison is used. If +<varname>a</varname> is an empty string and <varname>b</varname> is a +number, <varname>a</varname> is considered less than +<varname>b</varname>. The special string component +<literal>pre</literal> (for <emphasis>pre-release</emphasis>) is +considered to be less than other components. String components are +considered less than number components. Otherwise, they are compared +lexicographically (i.e., using case-sensitive string comparison).</para> + +<para>This is illustrated by the following examples: + +<screen> +1.0 < 2.3 +2.1 < 2.3 +2.3 = 2.3 +2.5 > 2.3 +3.1 > 2.3 +2.3.1 > 2.3 +2.3.1 > 2.3a +2.3pre1 < 2.3 +2.3pre3 < 2.3pre12 +2.3a < 2.3c +2.3pre1 < 2.3c +2.3pre1 < 2.3q</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--uninstall</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--uninstall</option></arg> + <arg choice='plain'><option>-e</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>drvnames</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The uninstall operation creates a new user environment, based on +the current generation of the active profile, from which the store +paths designated by the symbolic names +<replaceable>names</replaceable> are removed.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --uninstall gcc +$ nix-env -e '.*' <lineannotation>(remove everything)</lineannotation></screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-set"><title>Operation <option>--set</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--set</option></arg> + <arg choice='plain'><replaceable>drvname</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The <option>--set</option> operation modifies the current generation of a +profile so that it contains exactly the specified derivation, and nothing else. +</para> + +</refsection> + +<refsection><title>Examples</title> + +<para> +The following updates a profile such that its current generation will contain +just Firefox: + +<screen> +$ nix-env -p /nix/var/nix/profiles/browser --set firefox</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-set-flag"><title>Operation <option>--set-flag</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--set-flag</option></arg> + <arg choice='plain'><replaceable>name</replaceable></arg> + <arg choice='plain'><replaceable>value</replaceable></arg> + <arg choice='plain' rep='repeat'><replaceable>drvnames</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The <option>--set-flag</option> operation allows meta attributes +of installed packages to be modified. There are several attributes +that can be usefully modified, because they affect the behaviour of +<command>nix-env</command> or the user environment build +script: + +<itemizedlist> + + <listitem><para><varname>priority</varname> can be changed to + resolve filename clashes. The user environment build script uses + the <varname>meta.priority</varname> attribute of derivations to + resolve filename collisions between packages. Lower priority values + denote a higher priority. For instance, the GCC wrapper package and + the Binutils package in Nixpkgs both have a file + <filename>bin/ld</filename>, so previously if you tried to install + both you would get a collision. Now, on the other hand, the GCC + wrapper declares a higher priority than Binutils, so the former’s + <filename>bin/ld</filename> is symlinked in the user + environment.</para></listitem> + + <listitem><para><varname>keep</varname> can be set to + <literal>true</literal> to prevent the package from being upgraded + or replaced. This is useful if you want to hang on to an older + version of a package.</para></listitem> + + <listitem><para><varname>active</varname> can be set to + <literal>false</literal> to “disable” the package. That is, no + symlinks will be generated to the files of the package, but it + remains part of the profile (so it won’t be garbage-collected). It + can be set back to <literal>true</literal> to re-enable the + package.</para></listitem> + +</itemizedlist> + +</para> + +</refsection> + +<refsection><title>Examples</title> + +<para>To prevent the currently installed Firefox from being upgraded: + +<screen> +$ nix-env --set-flag keep true firefox</screen> + +After this, <command>nix-env -u</command> will ignore Firefox.</para> + +<para>To disable the currently installed Firefox, then install a new +Firefox while the old remains part of the profile: + +<screen> +$ nix-env -q +firefox-2.0.0.9 <lineannotation>(the current one)</lineannotation> + +$ nix-env --preserve-installed -i firefox-2.0.0.11 +installing `firefox-2.0.0.11' +building path(s) `/nix/store/myy0y59q3ig70dgq37jqwg1j0rsapzsl-user-environment' +collision between `/nix/store/<replaceable>...</replaceable>-firefox-2.0.0.11/bin/firefox' + and `/nix/store/<replaceable>...</replaceable>-firefox-2.0.0.9/bin/firefox'. +<lineannotation>(i.e., can’t have two active at the same time)</lineannotation> + +$ nix-env --set-flag active false firefox +setting flag on `firefox-2.0.0.9' + +$ nix-env --preserve-installed -i firefox-2.0.0.11 +installing `firefox-2.0.0.11' + +$ nix-env -q +firefox-2.0.0.11 <lineannotation>(the enabled one)</lineannotation> +firefox-2.0.0.9 <lineannotation>(the disabled one)</lineannotation></screen> + +</para> + +<para>To make files from <literal>binutils</literal> take precedence +over files from <literal>gcc</literal>: + +<screen> +$ nix-env --set-flag priority 5 binutils +$ nix-env --set-flag priority 10 gcc</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--query</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--query</option></arg> + <arg choice='plain'><option>-q</option></arg> + </group> + <group choice='opt'> + <arg choice='plain'><option>--installed</option></arg> + <arg choice='plain'><option>--available</option></arg> + <arg choice='plain'><option>-a</option></arg> + </group> + + <sbr /> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--status</option></arg> + <arg choice='plain'><option>-s</option></arg> + </group> + </arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr-path</option></arg> + <arg choice='plain'><option>-P</option></arg> + </group> + </arg> + <arg><option>--no-name</option></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--compare-versions</option></arg> + <arg choice='plain'><option>-c</option></arg> + </group> + </arg> + <arg><option>--system</option></arg> + <arg><option>--drv-path</option></arg> + <arg><option>--out-path</option></arg> + <arg><option>--description</option></arg> + <arg><option>--meta</option></arg> + + <sbr /> + + <arg><option>--xml</option></arg> + <arg><option>--json</option></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--prebuilt-only</option></arg> + <arg choice='plain'><option>-b</option></arg> + </group> + </arg> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + <replaceable>attribute-path</replaceable> + </arg> + + <sbr /> + + <arg choice='plain' rep='repeat'><replaceable>names</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>The query operation displays information about either the store +paths that are installed in the current generation of the active +profile (<option>--installed</option>), or the derivations that are +available for installation in the active Nix expression +(<option>--available</option>). It only prints information about +derivations whose symbolic name matches one of +<replaceable>names</replaceable>.</para> + +<para>The derivations are sorted by their <literal>name</literal> +attributes.</para> + +</refsection> + + +<refsection><title>Source selection</title> + +<para>The following flags specify the set of things on which the query +operates.</para> + +<variablelist> + + <varlistentry><term><option>--installed</option></term> + + <listitem><para>The query operates on the store paths that are + installed in the current generation of the active profile. This + is the default.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--available</option></term> + <term><option>-a</option></term> + + <listitem><para>The query operates on the derivations that are + available in the active Nix expression.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Queries</title> + +<para>The following flags specify what information to display about +the selected derivations. Multiple flags may be specified, in which +case the information is shown in the order given here. Note that the +name of the derivation is shown unless <option>--no-name</option> is +specified.</para> + +<!-- TODO: fix the terminology here; i.e., derivations, store paths, +user environment elements, etc. --> + +<variablelist> + + <varlistentry><term><option>--xml</option></term> + + <listitem><para>Print the result in an XML representation suitable + for automatic processing by other tools. The root element is + called <literal>items</literal>, which contains a + <literal>item</literal> element for each available or installed + derivation. The fields discussed below are all stored in + attributes of the <literal>item</literal> + elements.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--json</option></term> + + <listitem><para>Print the result in a JSON representation suitable + for automatic processing by other tools.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--prebuilt-only</option> / <option>-b</option></term> + + <listitem><para>Show only derivations for which a substitute is + registered, i.e., there is a pre-built binary available that can + be downloaded in lieu of building the derivation. Thus, this + shows all packages that probably can be installed + quickly.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--status</option></term> + <term><option>-s</option></term> + + <listitem><para>Print the <emphasis>status</emphasis> of the + derivation. The status consists of three characters. The first + is <literal>I</literal> or <literal>-</literal>, indicating + whether the derivation is currently installed in the current + generation of the active profile. This is by definition the case + for <option>--installed</option>, but not for + <option>--available</option>. The second is <literal>P</literal> + or <literal>-</literal>, indicating whether the derivation is + present on the system. This indicates whether installation of an + available derivation will require the derivation to be built. The + third is <literal>S</literal> or <literal>-</literal>, indicating + whether a substitute is available for the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--attr-path</option></term> + <term><option>-P</option></term> + + <listitem><para>Print the <emphasis>attribute path</emphasis> of + the derivation, which can be used to unambiguously select it using + the <link linkend="opt-attr"><option>--attr</option> option</link> + available in commands that install derivations like + <literal>nix-env --install</literal>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--no-name</option></term> + + <listitem><para>Suppress printing of the <literal>name</literal> + attribute of each derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--compare-versions</option> / + <option>-c</option></term> + + <listitem><para>Compare installed versions to available versions, + or vice versa (if <option>--available</option> is given). This is + useful for quickly seeing whether upgrades for installed + packages are available in a Nix expression. A column is added + with the following meaning: + + <variablelist> + + <varlistentry><term><literal><</literal> <replaceable>version</replaceable></term> + + <listitem><para>A newer version of the package is available + or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>=</literal> <replaceable>version</replaceable></term> + + <listitem><para>At most the same version of the package is + available or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>></literal> <replaceable>version</replaceable></term> + + <listitem><para>Only older versions of the package are + available or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>- ?</literal></term> + + <listitem><para>No version of the package is available or + installed.</para></listitem> + + </varlistentry> + + </variablelist> + + </para></listitem> + + </varlistentry> + + <varlistentry><term><option>--system</option></term> + + <listitem><para>Print the <literal>system</literal> attribute of + the derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--drv-path</option></term> + + <listitem><para>Print the path of the store + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--out-path</option></term> + + <listitem><para>Print the output path of the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--description</option></term> + + <listitem><para>Print a short (one-line) description of the + derivation, if available. The description is taken from the + <literal>meta.description</literal> attribute of the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--meta</option></term> + + <listitem><para>Print all of the meta-attributes of the + derivation. This option is only available with + <option>--xml</option> or <option>--json</option>.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>To show installed packages: + +<screen> +$ nix-env -q +bison-1.875c +docbook-xml-4.2 +firefox-1.0.4 +MPlayer-1.0pre7 +ORBit2-2.8.3 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show available packages: + +<screen> +$ nix-env -qa +firefox-1.0.7 +GConf-2.4.0.1 +MPlayer-1.0pre7 +ORBit2-2.8.3 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show the status of available packages: + +<screen> +$ nix-env -qas +-P- firefox-1.0.7 <lineannotation>(not installed but present)</lineannotation> +--S GConf-2.4.0.1 <lineannotation>(not present, but there is a substitute for fast installation)</lineannotation> +--S MPlayer-1.0pre3 <lineannotation>(i.e., this is not the installed MPlayer, even though the version is the same!)</lineannotation> +IP- ORBit2-2.8.3 <lineannotation>(installed and by definition present)</lineannotation> +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show available packages in the Nix expression <filename>foo.nix</filename>: + +<screen> +$ nix-env -f ./foo.nix -qa +foo-1.2.3 +</screen> + +</para> + +<para>To compare installed versions to what’s available: + +<screen> +$ nix-env -qc +<replaceable>...</replaceable> +acrobat-reader-7.0 - ? <lineannotation>(package is not available at all)</lineannotation> +autoconf-2.59 = 2.59 <lineannotation>(same version)</lineannotation> +firefox-1.0.4 < 1.0.7 <lineannotation>(a more recent version is available)</lineannotation> +<replaceable>...</replaceable> +</screen> + +</para> + +<para>To show all packages with “<literal>zip</literal>” in the name: + +<screen> +$ nix-env -qa '.*zip.*' +bzip2-1.0.6 +gzip-1.6 +zip-3.0 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show all packages with “<literal>firefox</literal>” or +“<literal>chromium</literal>” in the name: + +<screen> +$ nix-env -qa '.*(firefox|chromium).*' +chromium-37.0.2062.94 +chromium-beta-38.0.2125.24 +firefox-32.0.3 +firefox-with-plugins-13.0.1 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show all packages in the latest revision of the Nixpkgs +repository: + +<screen> +$ nix-env -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz -qa +</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--switch-profile</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--switch-profile</option></arg> + <arg choice='plain'><option>-S</option></arg> + </group> + <arg choice='req'><replaceable>path</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation makes <replaceable>path</replaceable> the current +profile for the user. That is, the symlink +<filename>~/.nix-profile</filename> is made to point to +<replaceable>path</replaceable>.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env -S ~/my-profile</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--list-generations</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--list-generations</option></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation print a list of all the currently existing +generations for the active profile. These may be switched to using +the <option>--switch-generation</option> operation. It also prints +the creation date of the generation, and indicates the current +generation.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env --list-generations + 95 2004-02-06 11:48:24 + 96 2004-02-06 11:49:01 + 97 2004-02-06 16:22:45 + 98 2004-02-06 16:24:33 (current)</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--delete-generations</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--delete-generations</option></arg> + <arg choice='plain' rep='repeat'><replaceable>generations</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation deletes the specified generations of the current +profile. The generations can be a list of generation numbers, the +special value <literal>old</literal> to delete all non-current +generations, a value such as <literal>30d</literal> to delete all +generations older than the specified number of days (except for the +generation that was active at that point in time), or a value such as +<literal>+5</literal> to keep the last <literal>5</literal> generations +ignoring any newer than current, e.g., if <literal>30</literal> is the current +generation <literal>+5</literal> will delete generation <literal>25</literal> +and all older generations. +Periodically deleting old generations is important to make garbage collection +effective.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --delete-generations 3 4 8 + +$ nix-env --delete-generations +5 + +$ nix-env --delete-generations 30d + +$ nix-env -p other_profile --delete-generations old</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--switch-generation</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--switch-generation</option></arg> + <arg choice='plain'><option>-G</option></arg> + </group> + <arg choice='req'><replaceable>generation</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation makes generation number +<replaceable>generation</replaceable> the current generation of the +active profile. That is, if the +<filename><replaceable>profile</replaceable></filename> is the path to +the active profile, then the symlink +<filename><replaceable>profile</replaceable></filename> is made to +point to +<filename><replaceable>profile</replaceable>-<replaceable>generation</replaceable>-link</filename>, +which is in turn a symlink to the actual user environment in the Nix +store.</para> + +<para>Switching will fail if the specified generation does not exist.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env -G 42 +switching from generation 50 to 42</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--rollback</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--rollback</option></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>This operation switches to the “previous” generation of the +active profile, that is, the highest numbered generation lower than +the current generation, if it exists. It is just a convenience +wrapper around <option>--list-generations</option> and +<option>--switch-generation</option>.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env --rollback +switching from generation 92 to 91 + +$ nix-env --rollback +error: no generation older than the current (91) exists</screen> + +</refsection> + +</refsection> + + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + + <varlistentry><term><envar>NIX_PROFILE</envar></term> + + <listitem><para>Location of the Nix profile. Defaults to the + target of the symlink <filename>~/.nix-profile</filename>, if it + exists, or <filename>/nix/var/nix/profiles/default</filename> + otherwise.</para></listitem> + + </varlistentry> + + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-hash.xml b/third_party/nix/doc/manual/command-ref/nix-hash.xml new file mode 100644 index 000000000000..80263e18e339 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-hash.xml @@ -0,0 +1,176 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-hash"> + +<refmeta> + <refentrytitle>nix-hash</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-hash</refname> + <refpurpose>compute the cryptographic hash of a path</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-hash</command> + <arg><option>--flat</option></arg> + <arg><option>--base32</option></arg> + <arg><option>--truncate</option></arg> + <arg><option>--type</option> <replaceable>hashAlgo</replaceable></arg> + <arg choice='plain' rep='repeat'><replaceable>path</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>nix-hash</command> + <arg choice='plain'><option>--to-base16</option></arg> + <arg choice='plain' rep='repeat'><replaceable>hash</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>nix-hash</command> + <arg choice='plain'><option>--to-base32</option></arg> + <arg choice='plain' rep='repeat'><replaceable>hash</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The command <command>nix-hash</command> computes the +cryptographic hash of the contents of each +<replaceable>path</replaceable> and prints it on standard output. By +default, it computes an MD5 hash, but other hash algorithms are +available as well. The hash is printed in hexadecimal. To generate +the same hash as <command>nix-prefetch-url</command> you have to +specify multiple arguments, see below for an example.</para> + +<para>The hash is computed over a <emphasis>serialisation</emphasis> +of each path: a dump of the file system tree rooted at the path. This +allows directories and symlinks to be hashed as well as regular files. +The dump is in the <emphasis>NAR format</emphasis> produced by <link +linkend="refsec-nix-store-dump"><command>nix-store</command> +<option>--dump</option></link>. Thus, <literal>nix-hash +<replaceable>path</replaceable></literal> yields the same +cryptographic hash as <literal>nix-store --dump +<replaceable>path</replaceable> | md5sum</literal>.</para> + +</refsection> + + +<refsection><title>Options</title> + +<variablelist> + + <varlistentry><term><option>--flat</option></term> + + <listitem><para>Print the cryptographic hash of the contents of + each regular file <replaceable>path</replaceable>. That is, do + not compute the hash over the dump of + <replaceable>path</replaceable>. The result is identical to that + produced by the GNU commands <command>md5sum</command> and + <command>sha1sum</command>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--base32</option></term> + + <listitem><para>Print the hash in a base-32 representation rather + than hexadecimal. This base-32 representation is more compact and + can be used in Nix expressions (such as in calls to + <function>fetchurl</function>).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--truncate</option></term> + + <listitem><para>Truncate hashes longer than 160 bits (such as + SHA-256) to 160 bits.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--type</option> <replaceable>hashAlgo</replaceable></term> + + <listitem><para>Use the specified cryptographic hash algorithm, + which can be one of <literal>md5</literal>, + <literal>sha1</literal>, and + <literal>sha256</literal>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--to-base16</option></term> + + <listitem><para>Don’t hash anything, but convert the base-32 hash + representation <replaceable>hash</replaceable> to + hexadecimal.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--to-base32</option></term> + + <listitem><para>Don’t hash anything, but convert the hexadecimal + hash representation <replaceable>hash</replaceable> to + base-32.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>Computing the same hash as <command>nix-prefetch-url</command>: +<screen> +$ nix-prefetch-url file://<(echo test) +1lkgqb6fclns49861dwk9rzb6xnfkxbpws74mxnx01z9qyv1pjpj +$ nix-hash --type sha256 --flat --base32 <(echo test) +1lkgqb6fclns49861dwk9rzb6xnfkxbpws74mxnx01z9qyv1pjpj +</screen> +</para> + +<para>Computing hashes: + +<screen> +$ mkdir test +$ echo "hello" > test/world + +$ nix-hash test/ <lineannotation>(MD5 hash; default)</lineannotation> +8179d3caeff1869b5ba1744e5a245c04 + +$ nix-store --dump test/ | md5sum <lineannotation>(for comparison)</lineannotation> +8179d3caeff1869b5ba1744e5a245c04 - + +$ nix-hash --type sha1 test/ +e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6 + +$ nix-hash --type sha1 --base32 test/ +nvd61k9nalji1zl9rrdfmsmvyyjqpzg4 + +$ nix-hash --type sha256 --flat test/ +error: reading file `test/': Is a directory + +$ nix-hash --type sha256 --flat test/world +5891b5b522d5df086d0ff0b110fbd9d21bb4fc7163af34d08286a2e846f6be03</screen> + +</para> + +<para>Converting between hexadecimal and base-32: + +<screen> +$ nix-hash --type sha1 --to-base32 e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6 +nvd61k9nalji1zl9rrdfmsmvyyjqpzg4 + +$ nix-hash --type sha1 --to-base16 nvd61k9nalji1zl9rrdfmsmvyyjqpzg4 +e4fd8ba5f7bbeaea5ace89fe10255536cd60dab6</screen> + +</para> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-instantiate.xml b/third_party/nix/doc/manual/command-ref/nix-instantiate.xml new file mode 100644 index 000000000000..53f06aed1241 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-instantiate.xml @@ -0,0 +1,266 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-instantiate"> + +<refmeta> + <refentrytitle>nix-instantiate</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-instantiate</refname> + <refpurpose>instantiate store derivations from Nix expressions</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-instantiate</command> + <group> + <arg choice='plain'><option>--parse</option></arg> + <arg choice='plain'> + <option>--eval</option> + <arg><option>--strict</option></arg> + <arg><option>--json</option></arg> + <arg><option>--xml</option></arg> + </arg> + </group> + <arg><option>--read-write-mode</option></arg> + <arg><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + <replaceable>attrPath</replaceable> + </arg> + <arg><option>--add-root</option> <replaceable>path</replaceable></arg> + <arg><option>--indirect</option></arg> + <group> + <arg choice='plain'><option>--expr</option></arg> + <arg choice='plain'><option>-E</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>files</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>nix-instantiate</command> + <arg choice='plain'><option>--find-file</option></arg> + <arg choice='plain' rep='repeat'><replaceable>files</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The command <command>nix-instantiate</command> generates <link +linkend="gloss-derivation">store derivations</link> from (high-level) +Nix expressions. It evaluates the Nix expressions in each of +<replaceable>files</replaceable> (which defaults to +<replaceable>./default.nix</replaceable>). Each top-level expression +should evaluate to a derivation, a list of derivations, or a set of +derivations. The paths of the resulting store derivations are printed +on standard output.</para> + +<para>If <replaceable>files</replaceable> is the character +<literal>-</literal>, then a Nix expression will be read from standard +input.</para> + +<para condition="manual">See also <xref linkend="sec-common-options" +/> for a list of common options.</para> + +</refsection> + + +<refsection><title>Options</title> + +<variablelist> + + <varlistentry> + <term><option>--add-root</option> <replaceable>path</replaceable></term> + <term><option>--indirect</option></term> + + <listitem><para>See the <link linkend="opt-add-root">corresponding + options</link> in <command>nix-store</command>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--parse</option></term> + + <listitem><para>Just parse the input files, and print their + abstract syntax trees on standard output in ATerm + format.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--eval</option></term> + + <listitem><para>Just parse and evaluate the input files, and print + the resulting values on standard output. No instantiation of + store derivations takes place.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--find-file</option></term> + + <listitem><para>Look up the given files in Nix’s search path (as + specified by the <envar linkend="env-NIX_PATH">NIX_PATH</envar> + environment variable). If found, print the corresponding absolute + paths on standard output. For instance, if + <envar>NIX_PATH</envar> is + <literal>nixpkgs=/home/alice/nixpkgs</literal>, then + <literal>nix-instantiate --find-file nixpkgs/default.nix</literal> + will print + <literal>/home/alice/nixpkgs/default.nix</literal>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--strict</option></term> + + <listitem><para>When used with <option>--eval</option>, + recursively evaluate list elements and attributes. Normally, such + sub-expressions are left unevaluated (since the Nix expression + language is lazy).</para> + + <warning><para>This option can cause non-termination, because lazy + data structures can be infinitely large.</para></warning> + + </listitem> + + </varlistentry> + + <varlistentry><term><option>--json</option></term> + + <listitem><para>When used with <option>--eval</option>, print the resulting + value as an JSON representation of the abstract syntax tree rather + than as an ATerm.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--xml</option></term> + + <listitem><para>When used with <option>--eval</option>, print the resulting + value as an XML representation of the abstract syntax tree rather than as + an ATerm. The schema is the same as that used by the <link + linkend="builtin-toXML"><function>toXML</function> built-in</link>. + </para></listitem> + + </varlistentry> + + <varlistentry><term><option>--read-write-mode</option></term> + + <listitem><para>When used with <option>--eval</option>, perform + evaluation in read/write mode so nix language features that + require it will still work (at the cost of needing to do + instantiation of every evaluated derivation). If this option is + not enabled, there may be uninstantiated store paths in the final + output.</para> + + </listitem> + + </varlistentry> + +</variablelist> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>Instantiating store derivations from a Nix expression, and +building them using <command>nix-store</command>: + +<screen> +$ nix-instantiate test.nix <lineannotation>(instantiate)</lineannotation> +/nix/store/cigxbmvy6dzix98dxxh9b6shg7ar5bvs-perl-BerkeleyDB-0.26.drv + +$ nix-store -r $(nix-instantiate test.nix) <lineannotation>(build)</lineannotation> +<replaceable>...</replaceable> +/nix/store/qhqk4n8ci095g3sdp93x7rgwyh9rdvgk-perl-BerkeleyDB-0.26 <lineannotation>(output path)</lineannotation> + +$ ls -l /nix/store/qhqk4n8ci095g3sdp93x7rgwyh9rdvgk-perl-BerkeleyDB-0.26 +dr-xr-xr-x 2 eelco users 4096 1970-01-01 01:00 lib +...</screen> + +</para> + +<para>You can also give a Nix expression on the command line: + +<screen> +$ nix-instantiate -E 'with import <nixpkgs> { }; hello' +/nix/store/j8s4zyv75a724q38cb0r87rlczaiag4y-hello-2.8.drv +</screen> + +This is equivalent to: + +<screen> +$ nix-instantiate '<nixpkgs>' -A hello +</screen> + +</para> + +<para>Parsing and evaluating Nix expressions: + +<screen> +$ nix-instantiate --parse -E '1 + 2' +1 + 2 + +$ nix-instantiate --eval -E '1 + 2' +3 + +$ nix-instantiate --eval --xml -E '1 + 2' +<![CDATA[<?xml version='1.0' encoding='utf-8'?> +<expr> + <int value="3" /> +</expr>]]></screen> + +</para> + +<para>The difference between non-strict and strict evaluation: + +<screen> +$ nix-instantiate --eval --xml -E 'rec { x = "foo"; y = x; }' +<replaceable>...</replaceable><![CDATA[ + <attr name="x"> + <string value="foo" /> + </attr> + <attr name="y"> + <unevaluated /> + </attr>]]> +<replaceable>...</replaceable></screen> + +Note that <varname>y</varname> is left unevaluated (the XML +representation doesn’t attempt to show non-normal forms). + +<screen> +$ nix-instantiate --eval --xml --strict -E 'rec { x = "foo"; y = x; }' +<replaceable>...</replaceable><![CDATA[ + <attr name="x"> + <string value="foo" /> + </attr> + <attr name="y"> + <string value="foo" /> + </attr>]]> +<replaceable>...</replaceable></screen> + +</para> + +</refsection> + + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-prefetch-url.xml b/third_party/nix/doc/manual/command-ref/nix-prefetch-url.xml new file mode 100644 index 000000000000..621ded72ec26 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-prefetch-url.xml @@ -0,0 +1,131 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-prefetch-url"> + +<refmeta> + <refentrytitle>nix-prefetch-url</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-prefetch-url</refname> + <refpurpose>copy a file from a URL into the store and print its hash</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-prefetch-url</command> + <arg><option>--version</option></arg> + <arg><option>--type</option> <replaceable>hashAlgo</replaceable></arg> + <arg><option>--print-path</option></arg> + <arg><option>--unpack</option></arg> + <arg><option>--name</option> <replaceable>name</replaceable></arg> + <arg choice='plain'><replaceable>url</replaceable></arg> + <arg><replaceable>hash</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + +<refsection><title>Description</title> + +<para>The command <command>nix-prefetch-url</command> downloads the +file referenced by the URL <replaceable>url</replaceable>, prints its +cryptographic hash, and copies it into the Nix store. The file name +in the store is +<filename><replaceable>hash</replaceable>-<replaceable>baseName</replaceable></filename>, +where <replaceable>baseName</replaceable> is everything following the +final slash in <replaceable>url</replaceable>.</para> + +<para>This command is just a convenience for Nix expression writers. +Often a Nix expression fetches some source distribution from the +network using the <literal>fetchurl</literal> expression contained in +Nixpkgs. However, <literal>fetchurl</literal> requires a +cryptographic hash. If you don't know the hash, you would have to +download the file first, and then <literal>fetchurl</literal> would +download it again when you build your Nix expression. Since +<literal>fetchurl</literal> uses the same name for the downloaded file +as <command>nix-prefetch-url</command>, the redundant download can be +avoided.</para> + +<para>If <replaceable>hash</replaceable> is specified, then a download +is not performed if the Nix store already contains a file with the +same hash and base name. Otherwise, the file is downloaded, and an +error is signaled if the actual hash of the file does not match the +specified hash.</para> + +<para>This command prints the hash on standard output. Additionally, +if the option <option>--print-path</option> is used, the path of the +downloaded file in the Nix store is also printed.</para> + +</refsection> + + +<refsection><title>Options</title> + +<variablelist> + + <varlistentry><term><option>--type</option> <replaceable>hashAlgo</replaceable></term> + + <listitem><para>Use the specified cryptographic hash algorithm, + which can be one of <literal>md5</literal>, + <literal>sha1</literal>, and + <literal>sha256</literal>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--print-path</option></term> + + <listitem><para>Print the store path of the downloaded file on + standard output.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--unpack</option></term> + + <listitem><para>Unpack the archive (which must be a tarball or zip + file) and add the result to the Nix store. The resulting hash can + be used with functions such as Nixpkgs’s + <varname>fetchzip</varname> or + <varname>fetchFromGitHub</varname>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--name</option> <replaceable>name</replaceable></term> + + <listitem><para>Override the name of the file in the Nix store. By + default, this is + <literal><replaceable>hash</replaceable>-<replaceable>basename</replaceable></literal>, + where <replaceable>basename</replaceable> is the last component of + <replaceable>url</replaceable>. Overriding the name is necessary + when <replaceable>basename</replaceable> contains characters that + are not allowed in Nix store paths.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-prefetch-url ftp://ftp.gnu.org/pub/gnu/hello/hello-2.10.tar.gz +0ssi1wpaf7plaswqqjwigppsg5fyh99vdlb9kzl7c9lng89ndq1i + +$ nix-prefetch-url --print-path mirror://gnu/hello/hello-2.10.tar.gz +0ssi1wpaf7plaswqqjwigppsg5fyh99vdlb9kzl7c9lng89ndq1i +/nix/store/3x7dwzq014bblazs7kq20p9hyzz0qh8g-hello-2.10.tar.gz + +$ nix-prefetch-url --unpack --print-path https://github.com/NixOS/patchelf/archive/0.8.tar.gz +079agjlv0hrv7fxnx9ngipx14gyncbkllxrp9cccnh3a50fxcmy7 +/nix/store/19zrmhm3m40xxaw81c8cqm6aljgrnwj2-0.8.tar.gz +</screen> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-shell.xml b/third_party/nix/doc/manual/command-ref/nix-shell.xml new file mode 100644 index 000000000000..bb4a4e420122 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-shell.xml @@ -0,0 +1,397 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-shell"> + +<refmeta> + <refentrytitle>nix-shell</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-shell</refname> + <refpurpose>start an interactive shell based on a Nix expression</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-shell</command> + <arg><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg><option>--argstr</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + <replaceable>attrPath</replaceable> + </arg> + <arg><option>--command</option> <replaceable>cmd</replaceable></arg> + <arg><option>--run</option> <replaceable>cmd</replaceable></arg> + <arg><option>--exclude</option> <replaceable>regexp</replaceable></arg> + <arg><option>--pure</option></arg> + <arg><option>--keep</option> <replaceable>name</replaceable></arg> + <group choice='req'> + <arg choice='plain'> + <group choice='req'> + <arg choice='plain'><option>--packages</option></arg> + <arg choice='plain'><option>-p</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>packages</replaceable></arg> + </arg> + <arg><replaceable>path</replaceable></arg> + </group> + </cmdsynopsis> +</refsynopsisdiv> + +<refsection><title>Description</title> + +<para>The command <command>nix-shell</command> will build the +dependencies of the specified derivation, but not the derivation +itself. It will then start an interactive shell in which all +environment variables defined by the derivation +<replaceable>path</replaceable> have been set to their corresponding +values, and the script <literal>$stdenv/setup</literal> has been +sourced. This is useful for reproducing the environment of a +derivation for development.</para> + +<para>If <replaceable>path</replaceable> is not given, +<command>nix-shell</command> defaults to +<filename>shell.nix</filename> if it exists, and +<filename>default.nix</filename> otherwise.</para> + +<para>If <replaceable>path</replaceable> starts with +<literal>http://</literal> or <literal>https://</literal>, it is +interpreted as the URL of a tarball that will be downloaded and +unpacked to a temporary location. The tarball must include a single +top-level directory containing at least a file named +<filename>default.nix</filename>.</para> + +<para>If the derivation defines the variable +<varname>shellHook</varname>, it will be evaluated after +<literal>$stdenv/setup</literal> has been sourced. Since this hook is +not executed by regular Nix builds, it allows you to perform +initialisation specific to <command>nix-shell</command>. For example, +the derivation attribute + +<programlisting> +shellHook = + '' + echo "Hello shell" + ''; +</programlisting> + +will cause <command>nix-shell</command> to print <literal>Hello shell</literal>.</para> + +</refsection> + + +<refsection><title>Options</title> + +<para>All options not listed here are passed to <command>nix-store +--realise</command>, except for <option>--arg</option> and +<option>--attr</option> / <option>-A</option> which are passed to +<command>nix-instantiate</command>. <phrase condition="manual">See +also <xref linkend="sec-common-options" />.</phrase></para> + +<variablelist> + + <varlistentry><term><option>--command</option> <replaceable>cmd</replaceable></term> + + <listitem><para>In the environment of the derivation, run the + shell command <replaceable>cmd</replaceable>. This command is + executed in an interactive shell. (Use <option>--run</option> to + use a non-interactive shell instead.) However, a call to + <literal>exit</literal> is implicitly added to the command, so the + shell will exit after running the command. To prevent this, add + <literal>return</literal> at the end; e.g. <literal>--command + "echo Hello; return"</literal> will print <literal>Hello</literal> + and then drop you into the interactive shell. This can be useful + for doing any additional initialisation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--run</option> <replaceable>cmd</replaceable></term> + + <listitem><para>Like <option>--command</option>, but executes the + command in a non-interactive shell. This means (among other + things) that if you hit Ctrl-C while the command is running, the + shell exits.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--exclude</option> <replaceable>regexp</replaceable></term> + + <listitem><para>Do not build any dependencies whose store path + matches the regular expression <replaceable>regexp</replaceable>. + This option may be specified multiple times.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--pure</option></term> + + <listitem><para>If this flag is specified, the environment is + almost entirely cleared before the interactive shell is started, + so you get an environment that more closely corresponds to the + “real” Nix build. A few variables, in particular + <envar>HOME</envar>, <envar>USER</envar> and + <envar>DISPLAY</envar>, are retained. Note that + <filename>~/.bashrc</filename> and (depending on your Bash + installation) <filename>/etc/bashrc</filename> are still sourced, + so any variables set there will affect the interactive + shell.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--packages</option> / <option>-p</option> <replaceable>packages</replaceable>…</term> + + <listitem><para>Set up an environment in which the specified + packages are present. The command line arguments are interpreted + as attribute names inside the Nix Packages collection. Thus, + <literal>nix-shell -p libjpeg openjdk</literal> will start a shell + in which the packages denoted by the attribute names + <varname>libjpeg</varname> and <varname>openjdk</varname> are + present.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>-i</option> <replaceable>interpreter</replaceable></term> + + <listitem><para>The chained script interpreter to be invoked by + <command>nix-shell</command>. Only applicable in + <literal>#!</literal>-scripts (described <link + linkend="ssec-nix-shell-shebang">below</link>).</para> + + </listitem></varlistentry> + + <varlistentry><term><option>--keep</option> <replaceable>name</replaceable></term> + + <listitem><para>When a <option>--pure</option> shell is started, + keep the listed environment variables.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>The following common options are supported:</para> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + +<refsection><title>Environment variables</title> + +<variablelist> + + <varlistentry><term><envar>NIX_BUILD_SHELL</envar></term> + + <listitem><para>Shell used to start the interactive environment. + Defaults to the <command>bash</command> found in <envar>PATH</envar>.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>To build the dependencies of the package Pan, and start an +interactive shell in which to build it: + +<screen> +$ nix-shell '<nixpkgs>' -A pan +[nix-shell]$ unpackPhase +[nix-shell]$ cd pan-* +[nix-shell]$ configurePhase +[nix-shell]$ buildPhase +[nix-shell]$ ./pan/gui/pan +</screen> + +To clear the environment first, and do some additional automatic +initialisation of the interactive shell: + +<screen> +$ nix-shell '<nixpkgs>' -A pan --pure \ + --command 'export NIX_DEBUG=1; export NIX_CORES=8; return' +</screen> + +Nix expressions can also be given on the command line. For instance, +the following starts a shell containing the packages +<literal>sqlite</literal> and <literal>libX11</literal>: + +<screen> +$ nix-shell -E 'with import <nixpkgs> { }; runCommand "dummy" { buildInputs = [ sqlite xorg.libX11 ]; } ""' +</screen> + +A shorter way to do the same is: + +<screen> +$ nix-shell -p sqlite xorg.libX11 +[nix-shell]$ echo $NIX_LDFLAGS +… -L/nix/store/j1zg5v…-sqlite-3.8.0.2/lib -L/nix/store/0gmcz9…-libX11-1.6.1/lib … +</screen> + +The <command>-p</command> flag looks up Nixpkgs in the Nix search +path. You can override it by passing <option>-I</option> or setting +<envar>NIX_PATH</envar>. For example, the following gives you a shell +containing the Pan package from a specific revision of Nixpkgs: + +<screen> +$ nix-shell -p pan -I nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/8a3eea054838b55aca962c3fbde9c83c102b8bf2.tar.gz + +[nix-shell:~]$ pan --version +Pan 0.139 +</screen> + +</para> + +</refsection> + + +<refsection xml:id="ssec-nix-shell-shebang"><title>Use as a <literal>#!</literal>-interpreter</title> + +<para>You can use <command>nix-shell</command> as a script interpreter +to allow scripts written in arbitrary languages to obtain their own +dependencies via Nix. This is done by starting the script with the +following lines: + +<programlisting> +#! /usr/bin/env nix-shell +#! nix-shell -i <replaceable>real-interpreter</replaceable> -p <replaceable>packages</replaceable> +</programlisting> + +where <replaceable>real-interpreter</replaceable> is the “real” script +interpreter that will be invoked by <command>nix-shell</command> after +it has obtained the dependencies and initialised the environment, and +<replaceable>packages</replaceable> are the attribute names of the +dependencies in Nixpkgs.</para> + +<para>The lines starting with <literal>#! nix-shell</literal> specify +<command>nix-shell</command> options (see above). Note that you cannot +write <literal>#! /usr/bin/env nix-shell -i ...</literal> because +many operating systems only allow one argument in +<literal>#!</literal> lines.</para> + +<para>For example, here is a Python script that depends on Python and +the <literal>prettytable</literal> package: + +<programlisting> +#! /usr/bin/env nix-shell +#! nix-shell -i python -p python pythonPackages.prettytable + +import prettytable + +# Print a simple table. +t = prettytable.PrettyTable(["N", "N^2"]) +for n in range(1, 10): t.add_row([n, n * n]) +print t +</programlisting> + +</para> + +<para>Similarly, the following is a Perl script that specifies that it +requires Perl and the <literal>HTML::TokeParser::Simple</literal> and +<literal>LWP</literal> packages: + +<programlisting> +#! /usr/bin/env nix-shell +#! nix-shell -i perl -p perl perlPackages.HTMLTokeParserSimple perlPackages.LWP + +use HTML::TokeParser::Simple; + +# Fetch nixos.org and print all hrefs. +my $p = HTML::TokeParser::Simple->new(url => 'http://nixos.org/'); + +while (my $token = $p->get_tag("a")) { + my $href = $token->get_attr("href"); + print "$href\n" if $href; +} +</programlisting> + +</para> + +<para>Sometimes you need to pass a simple Nix expression to customize +a package like Terraform: + +<programlisting><![CDATA[ +#! /usr/bin/env nix-shell +#! nix-shell -i bash -p "terraform.withPlugins (plugins: [ plugins.openstack ])" + +terraform apply +]]></programlisting> + +<note><para>You must use double quotes (<literal>"</literal>) when +passing a simple Nix expression in a nix-shell shebang.</para></note> +</para> + +<para>Finally, using the merging of multiple nix-shell shebangs the +following Haskell script uses a specific branch of Nixpkgs/NixOS (the +18.03 stable branch): + +<programlisting><![CDATA[ +#! /usr/bin/env nix-shell +#! nix-shell -i runghc -p "haskellPackages.ghcWithPackages (ps: [ps.HTTP ps.tagsoup])" +#! nix-shell -I nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/nixos-18.03.tar.gz + +import Network.HTTP +import Text.HTML.TagSoup + +-- Fetch nixos.org and print all hrefs. +main = do + resp <- Network.HTTP.simpleHTTP (getRequest "http://nixos.org/") + body <- getResponseBody resp + let tags = filter (isTagOpenName "a") $ parseTags body + let tags' = map (fromAttrib "href") tags + mapM_ putStrLn $ filter (/= "") tags' +]]></programlisting> + +If you want to be even more precise, you can specify a specific +revision of Nixpkgs: + +<programlisting> +#! nix-shell -I nixpkgs=https://github.com/NixOS/nixpkgs-channels/archive/0672315759b3e15e2121365f067c1c8c56bb4722.tar.gz +</programlisting> + +</para> + +<para>The examples above all used <option>-p</option> to get +dependencies from Nixpkgs. You can also use a Nix expression to build +your own dependencies. For example, the Python example could have been +written as: + +<programlisting> +#! /usr/bin/env nix-shell +#! nix-shell deps.nix -i python +</programlisting> + +where the file <filename>deps.nix</filename> in the same directory +as the <literal>#!</literal>-script contains: + +<programlisting> +with import <nixpkgs> {}; + +runCommand "dummy" { buildInputs = [ python pythonPackages.prettytable ]; } "" +</programlisting> + +</para> + +</refsection> + + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/nix-store.xml b/third_party/nix/doc/manual/command-ref/nix-store.xml new file mode 100644 index 000000000000..113a3c2e41ed --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-store.xml @@ -0,0 +1,1525 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-store"> + +<refmeta> + <refentrytitle>nix-store</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-store</refname> + <refpurpose>manipulate or query the Nix store</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-store</command> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-common-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <arg><option>--add-root</option> <replaceable>path</replaceable></arg> + <arg><option>--indirect</option></arg> + <arg choice='plain'><replaceable>operation</replaceable></arg> + <arg rep='repeat'><replaceable>options</replaceable></arg> + <arg rep='repeat'><replaceable>arguments</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The command <command>nix-store</command> performs primitive +operations on the Nix store. You generally do not need to run this +command manually.</para> + +<para><command>nix-store</command> takes exactly one +<emphasis>operation</emphasis> flag which indicates the subcommand to +be performed. These are documented below.</para> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Common options</title> + +<para>This section lists the options that are common to all +operations. These options are allowed for every subcommand, though +they may not always have an effect. <phrase condition="manual">See +also <xref linkend="sec-common-options" /> for a list of common +options.</phrase></para> + +<variablelist> + + <varlistentry xml:id="opt-add-root"><term><option>--add-root</option> <replaceable>path</replaceable></term> + + <listitem><para>Causes the result of a realisation + (<option>--realise</option> and <option>--force-realise</option>) + to be registered as a root of the garbage collector<phrase + condition="manual"> (see <xref linkend="ssec-gc-roots" + />)</phrase>. The root is stored in + <replaceable>path</replaceable>, which must be inside a directory + that is scanned for roots by the garbage collector (i.e., + typically in a subdirectory of + <filename>/nix/var/nix/gcroots/</filename>) + <emphasis>unless</emphasis> the <option>--indirect</option> flag + is used.</para> + + <para>If there are multiple results, then multiple symlinks will + be created by sequentially numbering symlinks beyond the first one + (e.g., <filename>foo</filename>, <filename>foo-2</filename>, + <filename>foo-3</filename>, and so on).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--indirect</option></term> + + <listitem> + + <para>In conjunction with <option>--add-root</option>, this option + allows roots to be stored <emphasis>outside</emphasis> of the GC + roots directory. This is useful for commands such as + <command>nix-build</command> that place a symlink to the build + result in the current directory; such a build result should not be + garbage-collected unless the symlink is removed.</para> + + <para>The <option>--indirect</option> flag causes a uniquely named + symlink to <replaceable>path</replaceable> to be stored in + <filename>/nix/var/nix/gcroots/auto/</filename>. For instance, + + <screen> +$ nix-store --add-root /home/eelco/bla/result --indirect -r <replaceable>...</replaceable> + +$ ls -l /nix/var/nix/gcroots/auto +lrwxrwxrwx 1 ... 2005-03-13 21:10 dn54lcypm8f8... -> /home/eelco/bla/result + +$ ls -l /home/eelco/bla/result +lrwxrwxrwx 1 ... 2005-03-13 21:10 /home/eelco/bla/result -> /nix/store/1r11343n6qd4...-f-spot-0.0.10</screen> + + Thus, when <filename>/home/eelco/bla/result</filename> is removed, + the GC root in the <filename>auto</filename> directory becomes a + dangling symlink and will be ignored by the collector.</para> + + <warning><para>Note that it is not possible to move or rename + indirect GC roots, since the symlink in the + <filename>auto</filename> directory will still point to the old + location.</para></warning> + + </listitem> + + </varlistentry> + +</variablelist> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id='rsec-nix-store-realise'><title>Operation <option>--realise</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <group choice='req'> + <arg choice='plain'><option>--realise</option></arg> + <arg choice='plain'><option>-r</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + <arg><option>--dry-run</option></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--realise</option> essentially “builds” +the specified store paths. Realisation is a somewhat overloaded term: + +<itemizedlist> + + <listitem><para>If the store path is a + <emphasis>derivation</emphasis>, realisation ensures that the output + paths of the derivation are <link + linkend="gloss-validity">valid</link> (i.e., the output path and its + closure exist in the file system). This can be done in several + ways. First, it is possible that the outputs are already valid, in + which case we are done immediately. Otherwise, there may be <link + linkend="gloss-substitute">substitutes</link> that produce the + outputs (e.g., by downloading them). Finally, the outputs can be + produced by performing the build action described by the + derivation.</para></listitem> + + <listitem><para>If the store path is not a derivation, realisation + ensures that the specified path is valid (i.e., it and its closure + exist in the file system). If the path is already valid, we are + done immediately. Otherwise, the path and any missing paths in its + closure may be produced through substitutes. If there are no + (successful) subsitutes, realisation fails.</para></listitem> + +</itemizedlist> + +</para> + +<para>The output path of each derivation is printed on standard +output. (For non-derivations argument, the argument itself is +printed.)</para> + +<para>The following flags are available:</para> + +<variablelist> + + <varlistentry><term><option>--dry-run</option></term> + + <listitem><para>Print on standard error a description of what + packages would be built or downloaded, without actually performing + the operation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--ignore-unknown</option></term> + + <listitem><para>If a non-derivation path does not have a + substitute, then silently ignore it.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--check</option></term> + + <listitem><para>This option allows you to check whether a + derivation is deterministic. It rebuilds the specified derivation + and checks whether the result is bitwise-identical with the + existing outputs, printing an error if that’s not the case. The + outputs of the specified derivation must already exist. When used + with <option>-K</option>, if an output path is not identical to + the corresponding output from the previous build, the new output + path is left in + <filename>/nix/store/<replaceable>name</replaceable>.check.</filename></para> + + <para>See also the <option>build-repeat</option> configuration + option, which repeats a derivation a number of times and prevents + its outputs from being registered as “valid” in the Nix store + unless they are identical.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>Special exit codes:</para> + +<variablelist> + + <varlistentry><term><literal>100</literal></term> + <listitem><para>Generic build failure, the builder process + returned with a non-zero exit code.</para></listitem> + </varlistentry> + + <varlistentry><term><literal>101</literal></term> + <listitem><para>Build timeout, the build was aborted because it + did not complete within the specified <link + linkend='conf-timeout'><literal>timeout</literal></link>. + </para></listitem> + </varlistentry> + + <varlistentry><term><literal>102</literal></term> + <listitem><para>Hash mismatch, the build output was rejected + because it does not match the specified <link + linkend="fixed-output-drvs"><varname>outputHash</varname></link>. + </para></listitem> + </varlistentry> + + <varlistentry><term><literal>104</literal></term> + <listitem><para>Not deterministic, the build succeeded in check + mode but the resulting output is not binary reproducable.</para> + </listitem> + </varlistentry> + +</variablelist> + +<para>With the <option>--keep-going</option> flag it's possible for +multiple failures to occur, in this case the 1xx status codes are or combined +using binary or. <screen> +1100100 + ^^^^ + |||`- timeout + ||`-- output hash mismatch + |`--- build failure + `---- not deterministic +</screen></para> + +</refsection> + + +<refsection><title>Examples</title> + +<para>This operation is typically used to build store derivations +produced by <link +linkend="sec-nix-instantiate"><command>nix-instantiate</command></link>: + +<screen> +$ nix-store -r $(nix-instantiate ./test.nix) +/nix/store/31axcgrlbfsxzmfff1gyj1bf62hvkby2-aterm-2.3.1</screen> + +This is essentially what <link +linkend="sec-nix-build"><command>nix-build</command></link> does.</para> + +<para>To test whether a previously-built derivation is deterministic: + +<screen> +$ nix-build '<nixpkgs>' -A hello --check -K +</screen> + +</para> + +</refsection> + + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id='rsec-nix-store-serve'><title>Operation <option>--serve</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--serve</option></arg> + <arg><option>--write</option></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--serve</option> provides access to +the Nix store over stdin and stdout, and is intended to be used +as a means of providing Nix store access to a restricted ssh user. +</para> + +<para>The following flags are available:</para> + +<variablelist> + + <varlistentry><term><option>--write</option></term> + + <listitem><para>Allow the connected client to request the realization + of derivations. In effect, this can be used to make the host act + as a remote builder.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>To turn a host into a build server, the +<filename>authorized_keys</filename> file can be used to provide build +access to a given SSH public key: + +<screen> +$ cat <<EOF >>/root/.ssh/authorized_keys +command="nice -n20 nix-store --serve --write" ssh-rsa AAAAB3NzaC1yc2EAAAA... +EOF +</screen> + +</para> + +</refsection> + + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id='rsec-nix-store-gc'><title>Operation <option>--gc</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--gc</option></arg> + <group> + <arg choice='plain'><option>--print-roots</option></arg> + <arg choice='plain'><option>--print-live</option></arg> + <arg choice='plain'><option>--print-dead</option></arg> + <arg choice='plain'><option>--delete</option></arg> + </group> + <arg><option>--max-freed</option> <replaceable>bytes</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>Without additional flags, the operation <option>--gc</option> +performs a garbage collection on the Nix store. That is, all paths in +the Nix store not reachable via file system references from a set of +“roots”, are deleted.</para> + +<para>The following suboperations may be specified:</para> + +<variablelist> + + <varlistentry><term><option>--print-roots</option></term> + + <listitem><para>This operation prints on standard output the set + of roots used by the garbage collector. What constitutes a root + is described in <xref linkend="ssec-gc-roots" + />.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--print-live</option></term> + + <listitem><para>This operation prints on standard output the set + of “live” store paths, which are all the store paths reachable + from the roots. Live paths should never be deleted, since that + would break consistency — it would become possible that + applications are installed that reference things that are no + longer present in the store.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--print-dead</option></term> + + <listitem><para>This operation prints out on standard output the + set of “dead” store paths, which is just the opposite of the set + of live paths: any path in the store that is not live (with + respect to the roots) is dead.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--delete</option></term> + + <listitem><para>This operation performs an actual garbage + collection. All dead paths are removed from the + store. This is the default.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>By default, all unreachable paths are deleted. The following +options control what gets deleted and in what order: + +<variablelist> + + <varlistentry><term><option>--max-freed</option> <replaceable>bytes</replaceable></term> + + <listitem><para>Keep deleting paths until at least + <replaceable>bytes</replaceable> bytes have been deleted, then + stop. The argument <replaceable>bytes</replaceable> can be + followed by the multiplicative suffix <literal>K</literal>, + <literal>M</literal>, <literal>G</literal> or + <literal>T</literal>, denoting KiB, MiB, GiB or TiB + units.</para></listitem> + + </varlistentry> + +</variablelist> + +</para> + +<para>The behaviour of the collector is also influenced by the <link +linkend="conf-keep-outputs"><literal>keep-outputs</literal></link> +and <link +linkend="conf-keep-derivations"><literal>keep-derivations</literal></link> +variables in the Nix configuration file.</para> + +<para>With <option>--delete</option>, the collector prints the total +number of freed bytes when it finishes (or when it is interrupted). +With <option>--print-dead</option>, it prints the number of bytes that +would be freed.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<para>To delete all unreachable paths, just do: + +<screen> +$ nix-store --gc +deleting `/nix/store/kq82idx6g0nyzsp2s14gfsc38npai7lf-cairo-1.0.4.tar.gz.drv' +<replaceable>...</replaceable> +8825586 bytes freed (8.42 MiB)</screen> + +</para> + +<para>To delete at least 100 MiBs of unreachable paths: + +<screen> +$ nix-store --gc --max-freed $((100 * 1024 * 1024))</screen> + +</para> + +</refsection> + + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--delete</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--delete</option></arg> + <arg><option>--ignore-liveness</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--delete</option> deletes the store paths +<replaceable>paths</replaceable> from the Nix store, but only if it is +safe to do so; that is, when the path is not reachable from a root of +the garbage collector. This means that you can only delete paths that +would also be deleted by <literal>nix-store --gc</literal>. Thus, +<literal>--delete</literal> is a more targeted version of +<literal>--gc</literal>.</para> + +<para>With the option <option>--ignore-liveness</option>, reachability +from the roots is ignored. However, the path still won’t be deleted +if there are other paths in the store that refer to it (i.e., depend +on it).</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --delete /nix/store/zq0h41l75vlb4z45kzgjjmsjxvcv1qk7-mesa-6.4 +0 bytes freed (0.00 MiB) +error: cannot delete path `/nix/store/zq0h41l75vlb4z45kzgjjmsjxvcv1qk7-mesa-6.4' since it is still alive</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id='refsec-nix-store-query'><title>Operation <option>--query</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <group choice='req'> + <arg choice='plain'><option>--query</option></arg> + <arg choice='plain'><option>-q</option></arg> + </group> + <group choice='req'> + <arg choice='plain'><option>--outputs</option></arg> + <arg choice='plain'><option>--requisites</option></arg> + <arg choice='plain'><option>-R</option></arg> + <arg choice='plain'><option>--references</option></arg> + <arg choice='plain'><option>--referrers</option></arg> + <arg choice='plain'><option>--referrers-closure</option></arg> + <arg choice='plain'><option>--deriver</option></arg> + <arg choice='plain'><option>-d</option></arg> + <arg choice='plain'><option>--graph</option></arg> + <arg choice='plain'><option>--tree</option></arg> + <arg choice='plain'><option>--binding</option> <replaceable>name</replaceable></arg> + <arg choice='plain'><option>-b</option> <replaceable>name</replaceable></arg> + <arg choice='plain'><option>--hash</option></arg> + <arg choice='plain'><option>--size</option></arg> + <arg choice='plain'><option>--roots</option></arg> + </group> + <arg><option>--use-output</option></arg> + <arg><option>-u</option></arg> + <arg><option>--force-realise</option></arg> + <arg><option>-f</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>The operation <option>--query</option> displays various bits of +information about the store paths . The queries are described below. At +most one query can be specified. The default query is +<option>--outputs</option>.</para> + +<para>The paths <replaceable>paths</replaceable> may also be symlinks +from outside of the Nix store, to the Nix store. In that case, the +query is applied to the target of the symlink.</para> + + +</refsection> + + +<refsection><title>Common query options</title> + +<variablelist> + + <varlistentry><term><option>--use-output</option></term> + <term><option>-u</option></term> + + <listitem><para>For each argument to the query that is a store + derivation, apply the query to the output path of the derivation + instead.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--force-realise</option></term> + <term><option>-f</option></term> + + <listitem><para>Realise each argument to the query first (see + <link linkend="rsec-nix-store-realise"><command>nix-store + --realise</command></link>).</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection xml:id='nixref-queries'><title>Queries</title> + +<variablelist> + + <varlistentry><term><option>--outputs</option></term> + + <listitem><para>Prints out the <link + linkend="gloss-output-path">output paths</link> of the store + derivations <replaceable>paths</replaceable>. These are the paths + that will be produced when the derivation is + built.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--requisites</option></term> + <term><option>-R</option></term> + + <listitem><para>Prints out the <link + linkend="gloss-closure">closure</link> of the store path + <replaceable>paths</replaceable>.</para> + + <para>This query has one option:</para> + + <variablelist> + + <varlistentry><term><option>--include-outputs</option></term> + + <listitem><para>Also include the output path of store + derivations, and their closures.</para></listitem> + + </varlistentry> + + </variablelist> + + <para>This query can be used to implement various kinds of + deployment. A <emphasis>source deployment</emphasis> is obtained + by distributing the closure of a store derivation. A + <emphasis>binary deployment</emphasis> is obtained by distributing + the closure of an output path. A <emphasis>cache + deployment</emphasis> (combined source/binary deployment, + including binaries of build-time-only dependencies) is obtained by + distributing the closure of a store derivation and specifying the + option <option>--include-outputs</option>.</para> + + </listitem> + + </varlistentry> + + <varlistentry><term><option>--references</option></term> + + <listitem><para>Prints the set of <link + linkend="gloss-reference">references</link> of the store paths + <replaceable>paths</replaceable>, that is, their immediate + dependencies. (For <emphasis>all</emphasis> dependencies, use + <option>--requisites</option>.)</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--referrers</option></term> + + <listitem><para>Prints the set of <emphasis>referrers</emphasis> of + the store paths <replaceable>paths</replaceable>, that is, the + store paths currently existing in the Nix store that refer to one + of <replaceable>paths</replaceable>. Note that contrary to the + references, the set of referrers is not constant; it can change as + store paths are added or removed.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--referrers-closure</option></term> + + <listitem><para>Prints the closure of the set of store paths + <replaceable>paths</replaceable> under the referrers relation; that + is, all store paths that directly or indirectly refer to one of + <replaceable>paths</replaceable>. These are all the path currently + in the Nix store that are dependent on + <replaceable>paths</replaceable>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--deriver</option></term> + <term><option>-d</option></term> + + <listitem><para>Prints the <link + linkend="gloss-deriver">deriver</link> of the store paths + <replaceable>paths</replaceable>. If the path has no deriver + (e.g., if it is a source file), or if the deriver is not known + (e.g., in the case of a binary-only deployment), the string + <literal>unknown-deriver</literal> is printed.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--graph</option></term> + + <listitem><para>Prints the references graph of the store paths + <replaceable>paths</replaceable> in the format of the + <command>dot</command> tool of AT&T's <link + xlink:href="http://www.graphviz.org/">Graphviz package</link>. + This can be used to visualise dependency graphs. To obtain a + build-time dependency graph, apply this to a store derivation. To + obtain a runtime dependency graph, apply it to an output + path.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--tree</option></term> + + <listitem><para>Prints the references graph of the store paths + <replaceable>paths</replaceable> as a nested ASCII tree. + References are ordered by descending closure size; this tends to + flatten the tree, making it more readable. The query only + recurses into a store path when it is first encountered; this + prevents a blowup of the tree representation of the + graph.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--graphml</option></term> + + <listitem><para>Prints the references graph of the store paths + <replaceable>paths</replaceable> in the <link + xlink:href="http://graphml.graphdrawing.org/">GraphML</link> file format. + This can be used to visualise dependency graphs. To obtain a + build-time dependency graph, apply this to a store derivation. To + obtain a runtime dependency graph, apply it to an output + path.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--binding</option> <replaceable>name</replaceable></term> + <term><option>-b</option> <replaceable>name</replaceable></term> + + <listitem><para>Prints the value of the attribute + <replaceable>name</replaceable> (i.e., environment variable) of + the store derivations <replaceable>paths</replaceable>. It is an + error for a derivation to not have the specified + attribute.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--hash</option></term> + + <listitem><para>Prints the SHA-256 hash of the contents of the + store paths <replaceable>paths</replaceable> (that is, the hash of + the output of <command>nix-store --dump</command> on the given + paths). Since the hash is stored in the Nix database, this is a + fast operation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--size</option></term> + + <listitem><para>Prints the size in bytes of the contents of the + store paths <replaceable>paths</replaceable> — to be precise, the + size of the output of <command>nix-store --dump</command> on the + given paths. Note that the actual disk space required by the + store paths may be higher, especially on filesystems with large + cluster sizes.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--roots</option></term> + + <listitem><para>Prints the garbage collector roots that point, + directly or indirectly, at the store paths + <replaceable>paths</replaceable>.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>Print the closure (runtime dependencies) of the +<command>svn</command> program in the current user environment: + +<screen> +$ nix-store -qR $(which svn) +/nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4 +/nix/store/9lz9yc6zgmc0vlqmn2ipcpkjlmbi51vv-glibc-2.3.4 +<replaceable>...</replaceable></screen> + +</para> + +<para>Print the build-time dependencies of <command>svn</command>: + +<screen> +$ nix-store -qR $(nix-store -qd $(which svn)) +/nix/store/02iizgn86m42q905rddvg4ja975bk2i4-grep-2.5.1.tar.bz2.drv +/nix/store/07a2bzxmzwz5hp58nf03pahrv2ygwgs3-gcc-wrapper.sh +/nix/store/0ma7c9wsbaxahwwl04gbw3fcd806ski4-glibc-2.3.4.drv +<replaceable>... lots of other paths ...</replaceable></screen> + +The difference with the previous example is that we ask the closure of +the derivation (<option>-qd</option>), not the closure of the output +path that contains <command>svn</command>.</para> + +<para>Show the build-time dependencies as a tree: + +<screen> +$ nix-store -q --tree $(nix-store -qd $(which svn)) +/nix/store/7i5082kfb6yjbqdbiwdhhza0am2xvh6c-subversion-1.1.4.drv ++---/nix/store/d8afh10z72n8l1cr5w42366abiblgn54-builder.sh ++---/nix/store/fmzxmpjx2lh849ph0l36snfj9zdibw67-bash-3.0.drv +| +---/nix/store/570hmhmx3v57605cqg9yfvvyh0nnb8k8-bash +| +---/nix/store/p3srsbd8dx44v2pg6nbnszab5mcwx03v-builder.sh +<replaceable>...</replaceable></screen> + +</para> + +<para>Show all paths that depend on the same OpenSSL library as +<command>svn</command>: + +<screen> +$ nix-store -q --referrers $(nix-store -q --binding openssl $(nix-store -qd $(which svn))) +/nix/store/23ny9l9wixx21632y2wi4p585qhva1q8-sylpheed-1.0.0 +/nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4 +/nix/store/dpmvp969yhdqs7lm2r1a3gng7pyq6vy4-subversion-1.1.3 +/nix/store/l51240xqsgg8a7yrbqdx1rfzyv6l26fx-lynx-2.8.5</screen> + +</para> + +<para>Show all paths that directly or indirectly depend on the Glibc +(C library) used by <command>svn</command>: + +<screen> +$ nix-store -q --referrers-closure $(ldd $(which svn) | grep /libc.so | awk '{print $3}') +/nix/store/034a6h4vpz9kds5r6kzb9lhh81mscw43-libgnomeprintui-2.8.2 +/nix/store/15l3yi0d45prm7a82pcrknxdh6nzmxza-gawk-3.1.4 +<replaceable>...</replaceable></screen> + +Note that <command>ldd</command> is a command that prints out the +dynamic libraries used by an ELF executable.</para> + +<para>Make a picture of the runtime dependency graph of the current +user environment: + +<screen> +$ nix-store -q --graph ~/.nix-profile | dot -Tps > graph.ps +$ gv graph.ps</screen> + +</para> + +<para>Show every garbage collector root that points to a store path +that depends on <command>svn</command>: + +<screen> +$ nix-store -q --roots $(which svn) +/nix/var/nix/profiles/default-81-link +/nix/var/nix/profiles/default-82-link +/nix/var/nix/profiles/per-user/eelco/profile-97-link +</screen> + +</para> + +</refsection> + + +</refsection> + + + +<!--######################################################################--> + +<!-- +<refsection xml:id="rsec-nix-store-reg-val"><title>Operation <option>-XXX-register-validity</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>-XXX-register-validity</option></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>TODO</para> + +</refsection> + +</refsection> +--> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--add</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--add</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--add</option> adds the specified paths to +the Nix store. It prints the resulting paths in the Nix store on +standard output.</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --add ./foo.c +/nix/store/m7lrha58ph6rcnv109yzx1nk1cj7k7zf-foo.c</screen> + +</refsection> + +</refsection> + +<!--######################################################################--> + +<refsection><title>Operation <option>--add-fixed</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-store</command> + <arg><option>--recursive</option></arg> + <arg choice='plain'><option>--add-fixed</option></arg> + <arg choice='plain'><replaceable>algorithm</replaceable></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--add-fixed</option> adds the specified paths to +the Nix store. Unlike <option>--add</option> paths are registered using the +specified hashing algorithm, resulting in the same output path as a fixed output +derivation. This can be used for sources that are not available from a public +url or broke since the download expression was written. +</para> + +<para>This operation has the following options: + +<variablelist> + + <varlistentry><term><option>--recursive</option></term> + + <listitem><para> + Use recursive instead of flat hashing mode, used when adding directories + to the store. + </para></listitem> + + </varlistentry> + +</variablelist> + +</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --add-fixed sha256 ./hello-2.10.tar.gz +/nix/store/3x7dwzq014bblazs7kq20p9hyzz0qh8g-hello-2.10.tar.gz</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id='refsec-nix-store-verify'><title>Operation <option>--verify</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--verify</option></arg> + <arg><option>--check-contents</option></arg> + <arg><option>--repair</option></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--verify</option> verifies the internal +consistency of the Nix database, and the consistency between the Nix +database and the Nix store. Any inconsistencies encountered are +automatically repaired. Inconsistencies are generally the result of +the Nix store or database being modified by non-Nix tools, or of bugs +in Nix itself.</para> + +<para>This operation has the following options: + +<variablelist> + + <varlistentry><term><option>--check-contents</option></term> + + <listitem><para>Checks that the contents of every valid store path + has not been altered by computing a SHA-256 hash of the contents + and comparing it with the hash stored in the Nix database at build + time. Paths that have been modified are printed out. For large + stores, <option>--check-contents</option> is obviously quite + slow.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--repair</option></term> + + <listitem><para>If any valid path is missing from the store, or + (if <option>--check-contents</option> is given) the contents of a + valid path has been modified, then try to repair the path by + redownloading it. See <command>nix-store --repair-path</command> + for details.</para></listitem> + + </varlistentry> + +</variablelist> + +</para> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--verify-path</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--verify-path</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--verify-path</option> compares the +contents of the given store paths to their cryptographic hashes stored +in Nix’s database. For every changed path, it prints a warning +message. The exit status is 0 if no path has changed, and 1 +otherwise.</para> + +</refsection> + +<refsection><title>Example</title> + +<para>To verify the integrity of the <command>svn</command> command and all its dependencies: + +<screen> +$ nix-store --verify-path $(nix-store -qR $(which svn)) +</screen> + +</para> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--repair-path</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--repair-path</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--repair-path</option> attempts to +“repair” the specified paths by redownloading them using the available +substituters. If no substitutes are available, then repair is not +possible.</para> + +<warning><para>During repair, there is a very small time window during +which the old path (if it exists) is moved out of the way and replaced +with the new path. If repair is interrupted in between, then the +system may be left in a broken state (e.g., if the path contains a +critical system component like the GNU C Library).</para></warning> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --verify-path /nix/store/dj7a81wsm1ijwwpkks3725661h3263p5-glibc-2.13 +path `/nix/store/dj7a81wsm1ijwwpkks3725661h3263p5-glibc-2.13' was modified! + expected hash `2db57715ae90b7e31ff1f2ecb8c12ec1cc43da920efcbe3b22763f36a1861588', + got `481c5aa5483ebc97c20457bb8bca24deea56550d3985cda0027f67fe54b808e4' + +$ nix-store --repair-path /nix/store/dj7a81wsm1ijwwpkks3725661h3263p5-glibc-2.13 +fetching path `/nix/store/d7a81wsm1ijwwpkks3725661h3263p5-glibc-2.13'... +… +</screen> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection xml:id='refsec-nix-store-dump'><title>Operation <option>--dump</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--dump</option></arg> + <arg choice='plain'><replaceable>path</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--dump</option> produces a NAR (Nix +ARchive) file containing the contents of the file system tree rooted +at <replaceable>path</replaceable>. The archive is written to +standard output.</para> + +<para>A NAR archive is like a TAR or Zip archive, but it contains only +the information that Nix considers important. For instance, +timestamps are elided because all files in the Nix store have their +timestamp set to 0 anyway. Likewise, all permissions are left out +except for the execute bit, because all files in the Nix store have +644 or 755 permission.</para> + +<para>Also, a NAR archive is <emphasis>canonical</emphasis>, meaning +that “equal” paths always produce the same NAR archive. For instance, +directory entries are always sorted so that the actual on-disk order +doesn’t influence the result. This means that the cryptographic hash +of a NAR dump of a path is usable as a fingerprint of the contents of +the path. Indeed, the hashes of store paths stored in Nix’s database +(see <link linkend="refsec-nix-store-query"><literal>nix-store -q +--hash</literal></link>) are SHA-256 hashes of the NAR dump of each +store path.</para> + +<para>NAR archives support filenames of unlimited length and 64-bit +file sizes. They can contain regular files, directories, and symbolic +links, but not other types of files (such as device nodes).</para> + +<para>A Nix archive can be unpacked using <literal>nix-store +--restore</literal>.</para> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--restore</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--restore</option></arg> + <arg choice='plain'><replaceable>path</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--restore</option> unpacks a NAR archive +to <replaceable>path</replaceable>, which must not already exist. The +archive is read from standard input.</para> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection xml:id='refsec-nix-store-export'><title>Operation <option>--export</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--export</option></arg> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--export</option> writes a serialisation +of the specified store paths to standard output in a format that can +be imported into another Nix store with <command +linkend="refsec-nix-store-import">nix-store --import</command>. This +is like <command linkend="refsec-nix-store-dump">nix-store +--dump</command>, except that the NAR archive produced by that command +doesn’t contain the necessary meta-information to allow it to be +imported into another Nix store (namely, the set of references of the +path).</para> + +<para>This command does not produce a <emphasis>closure</emphasis> of +the specified paths, so if a store path references other store paths +that are missing in the target Nix store, the import will fail. To +copy a whole closure, do something like: + +<screen> +$ nix-store --export $(nix-store -qR <replaceable>paths</replaceable>) > out</screen> + +To import the whole closure again, run: + +<screen> +$ nix-store --import < out</screen> + +</para> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection xml:id='refsec-nix-store-import'><title>Operation <option>--import</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--import</option></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--import</option> reads a serialisation of +a set of store paths produced by <command +linkend="refsec-nix-store-export">nix-store --export</command> from +standard input and adds those store paths to the Nix store. Paths +that already exist in the Nix store are ignored. If a path refers to +another path that doesn’t exist in the Nix store, the import +fails.</para> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--optimise</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--optimise</option></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--optimise</option> reduces Nix store disk +space usage by finding identical files in the store and hard-linking +them to each other. It typically reduces the size of the store by +something like 25-35%. Only regular files and symlinks are +hard-linked in this manner. Files are considered identical when they +have the same NAR archive serialisation: that is, regular files must +have the same contents and permission (executable or non-executable), +and symlinks must have the same contents.</para> + +<para>After completion, or when the command is interrupted, a report +on the achieved savings is printed on standard error.</para> + +<para>Use <option>-vv</option> or <option>-vvv</option> to get some +progress indication.</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --optimise +hashing files in `/nix/store/qhqx7l2f1kmwihc9bnxs7rc159hsxnf3-gcc-4.1.1' +<replaceable>...</replaceable> +541838819 bytes (516.74 MiB) freed by hard-linking 54143 files; +there are 114486 files with equal contents out of 215894 files in total +</screen> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--read-log</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <group choice='req'> + <arg choice='plain'><option>--read-log</option></arg> + <arg choice='plain'><option>-l</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--read-log</option> prints the build log +of the specified store paths on standard output. The build log is +whatever the builder of a derivation wrote to standard output and +standard error. If a store path is not a derivation, the deriver of +the store path is used.</para> + +<para>Build logs are kept in +<filename>/nix/var/log/nix/drvs</filename>. However, there is no +guarantee that a build log is available for any particular store path. +For instance, if the path was downloaded as a pre-built binary through +a substitute, then the log is unavailable.</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store -l $(which ktorrent) +building /nix/store/dhc73pvzpnzxhdgpimsd9sw39di66ph1-ktorrent-2.2.1 +unpacking sources +unpacking source archive /nix/store/p8n1jpqs27mgkjw07pb5269717nzf5f8-ktorrent-2.2.1.tar.gz +ktorrent-2.2.1/ +ktorrent-2.2.1/NEWS +<replaceable>...</replaceable> +</screen> + +</refsection> + + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--dump-db</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--dump-db</option></arg> + <arg rep='repeat'><replaceable>paths</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--dump-db</option> writes a dump of the +Nix database to standard output. It can be loaded into an empty Nix +store using <option>--load-db</option>. This is useful for making +backups and when migrating to different database schemas.</para> + +<para>By default, <option>--dump-db</option> will dump the entire Nix +database. When one or more store paths is passed, only the subset of +the Nix database for those store paths is dumped. As with +<option>--export</option>, the user is responsible for passing all the +store paths for a closure. See <option>--export</option> for an +example.</para> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--load-db</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--load-db</option></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--load-db</option> reads a dump of the Nix +database created by <option>--dump-db</option> from standard input and +loads it into the Nix database.</para> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection><title>Operation <option>--print-env</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'><option>--print-env</option></arg> + <arg choice='plain'><replaceable>drvpath</replaceable></arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The operation <option>--print-env</option> prints out the +environment of a derivation in a format that can be evaluated by a +shell. The command line arguments of the builder are placed in the +variable <envar>_args</envar>.</para> + +</refsection> + +<refsection><title>Example</title> + +<screen> +$ nix-store --print-env $(nix-instantiate '<nixpkgs>' -A firefox) +<replaceable>…</replaceable> +export src; src='/nix/store/plpj7qrwcz94z2psh6fchsi7s8yihc7k-firefox-12.0.source.tar.bz2' +export stdenv; stdenv='/nix/store/7c8asx3yfrg5dg1gzhzyq2236zfgibnn-stdenv' +export system; system='x86_64-linux' +export _args; _args='-e /nix/store/9krlzvny65gdc8s7kpb6lkx8cd02c25c-default-builder.sh' +</screen> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection xml:id='rsec-nix-store-generate-binary-cache-key'><title>Operation <option>--generate-binary-cache-key</option></title> + +<refsection> + <title>Synopsis</title> + <cmdsynopsis> + <command>nix-store</command> + <arg choice='plain'> + <option>--generate-binary-cache-key</option> + <option>key-name</option> + <option>secret-key-file</option> + <option>public-key-file</option> + </arg> + </cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>This command generates an <link +xlink:href="http://ed25519.cr.yp.to/">Ed25519 key pair</link> that can +be used to create a signed binary cache. It takes three mandatory +parameters: + +<orderedlist> + + <listitem><para>A key name, such as + <literal>cache.example.org-1</literal>, that is used to look up keys + on the client when it verifies signatures. It can be anything, but + it’s suggested to use the host name of your cache + (e.g. <literal>cache.example.org</literal>) with a suffix denoting + the number of the key (to be incremented every time you need to + revoke a key).</para></listitem> + + <listitem><para>The file name where the secret key is to be + stored.</para></listitem> + + <listitem><para>The file name where the public key is to be + stored.</para></listitem> + +</orderedlist> + +</para> + +</refsection> + +</refsection> + + +<!--######################################################################--> + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> diff --git a/third_party/nix/doc/manual/command-ref/opt-common-syn.xml b/third_party/nix/doc/manual/command-ref/opt-common-syn.xml new file mode 100644 index 000000000000..b610b54b9620 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/opt-common-syn.xml @@ -0,0 +1,64 @@ +<nop xmlns="http://docbook.org/ns/docbook"> + +<arg><option>--help</option></arg> +<arg><option>--version</option></arg> +<arg rep='repeat'> + <group choice='req'> + <arg choice='plain'><option>--verbose</option></arg> + <arg choice='plain'><option>-v</option></arg> + </group> +</arg> +<arg> + <arg choice='plain'><option>--quiet</option></arg> +</arg> +<arg> + <group choice='plain'> + <arg choice='plain'><option>--no-build-output</option></arg> + <arg choice='plain'><option>-Q</option></arg> + </group> +</arg> +<arg> + <group choice='req'> + <arg choice='plain'><option>--max-jobs</option></arg> + <arg choice='plain'><option>-j</option></arg> + </group> + <replaceable>number</replaceable> +</arg> +<arg> + <option>--cores</option> + <replaceable>number</replaceable> +</arg> +<arg> + <option>--max-silent-time</option> + <replaceable>number</replaceable> +</arg> +<arg> + <option>--timeout</option> + <replaceable>number</replaceable> +</arg> +<arg> + <group choice='plain'> + <arg choice='plain'><option>--keep-going</option></arg> + <arg choice='plain'><option>-k</option></arg> + </group> +</arg> +<arg> + <group choice='plain'> + <arg choice='plain'><option>--keep-failed</option></arg> + <arg choice='plain'><option>-K</option></arg> + </group> +</arg> +<arg><option>--fallback</option></arg> +<arg><option>--readonly-mode</option></arg> +<arg> + <option>-I</option> + <replaceable>path</replaceable> +</arg> +<arg> + <option>--option</option> + <replaceable>name</replaceable> + <replaceable>value</replaceable> +</arg> +<sbr /> + +</nop> diff --git a/third_party/nix/doc/manual/command-ref/opt-common.xml b/third_party/nix/doc/manual/command-ref/opt-common.xml new file mode 100644 index 000000000000..b8a2f260e8fe --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/opt-common.xml @@ -0,0 +1,366 @@ +<chapter xmlns="http://docbook.org/ns/docbook" xml:id="sec-common-options"> + +<title>Common Options</title> + + +<para>Most Nix commands accept the following command-line options:</para> + +<variablelist xml:id="opt-common"> + +<varlistentry><term><option>--help</option></term> + + <listitem><para>Prints out a summary of the command syntax and + exits.</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--version</option></term> + + <listitem><para>Prints out the Nix version number on standard output + and exits.</para></listitem> +</varlistentry> + + +<varlistentry><term><option>--verbose</option> / <option>-v</option></term> + + <listitem> + + <para>Increases the level of verbosity of diagnostic messages + printed on standard error. For each Nix operation, the information + printed on standard output is well-defined; any diagnostic + information is printed on standard error, never on standard + output.</para> + + <para>This option may be specified repeatedly. Currently, the + following verbosity levels exist:</para> + + <variablelist> + + <varlistentry><term>0</term> + <listitem><para>“Errors only”: only print messages + explaining why the Nix invocation failed.</para></listitem> + </varlistentry> + + <varlistentry><term>1</term> + <listitem><para>“Informational”: print + <emphasis>useful</emphasis> messages about what Nix is doing. + This is the default.</para></listitem> + </varlistentry> + + <varlistentry><term>2</term> + <listitem><para>“Talkative”: print more informational + messages.</para></listitem> + </varlistentry> + + <varlistentry><term>3</term> + <listitem><para>“Chatty”: print even more + informational messages.</para></listitem> + </varlistentry> + + <varlistentry><term>4</term> + <listitem><para>“Debug”: print debug + information.</para></listitem> + </varlistentry> + + <varlistentry><term>5</term> + <listitem><para>“Vomit”: print vast amounts of debug + information.</para></listitem> + </varlistentry> + + </variablelist> + + </listitem> + +</varlistentry> + + +<varlistentry><term><option>--quiet</option></term> + + <listitem> + + <para>Decreases the level of verbosity of diagnostic messages + printed on standard error. This is the inverse option to + <option>-v</option> / <option>--verbose</option>. + </para> + + <para>This option may be specified repeatedly. See the previous + verbosity levels list.</para> + + </listitem> + +</varlistentry> + + +<varlistentry><term><option>--no-build-output</option> / <option>-Q</option></term> + + <listitem><para>By default, output written by builders to standard + output and standard error is echoed to the Nix command's standard + error. This option suppresses this behaviour. Note that the + builder's standard output and error are always written to a log file + in + <filename><replaceable>prefix</replaceable>/nix/var/log/nix</filename>.</para></listitem> + +</varlistentry> + + +<varlistentry xml:id="opt-max-jobs"><term><option>--max-jobs</option> / <option>-j</option> +<replaceable>number</replaceable></term> + + <listitem> + + <para>Sets the maximum number of build jobs that Nix will + perform in parallel to the specified number. Specify + <literal>auto</literal> to use the number of CPUs in the system. + The default is specified by the <link + linkend='conf-max-jobs'><literal>max-jobs</literal></link> + configuration setting, which itself defaults to + <literal>1</literal>. A higher value is useful on SMP systems or to + exploit I/O latency.</para> + + <para> Setting it to <literal>0</literal> disallows building on the local + machine, which is useful when you want builds to happen only on remote + builders.</para> + + </listitem> + +</varlistentry> + + +<varlistentry xml:id="opt-cores"><term><option>--cores</option></term> + + <listitem><para>Sets the value of the <envar>NIX_BUILD_CORES</envar> + environment variable in the invocation of builders. Builders can + use this variable at their discretion to control the maximum amount + of parallelism. For instance, in Nixpkgs, if the derivation + attribute <varname>enableParallelBuilding</varname> is set to + <literal>true</literal>, the builder passes the + <option>-j<replaceable>N</replaceable></option> flag to GNU Make. + It defaults to the value of the <link + linkend='conf-cores'><literal>cores</literal></link> + configuration setting, if set, or <literal>1</literal> otherwise. + The value <literal>0</literal> means that the builder should use all + available CPU cores in the system.</para></listitem> + +</varlistentry> + + +<varlistentry xml:id="opt-max-silent-time"><term><option>--max-silent-time</option></term> + + <listitem><para>Sets the maximum number of seconds that a builder + can go without producing any data on standard output or standard + error. The default is specified by the <link + linkend='conf-max-silent-time'><literal>max-silent-time</literal></link> + configuration setting. <literal>0</literal> means no + time-out.</para></listitem> + +</varlistentry> + +<varlistentry xml:id="opt-timeout"><term><option>--timeout</option></term> + + <listitem><para>Sets the maximum number of seconds that a builder + can run. The default is specified by the <link + linkend='conf-timeout'><literal>timeout</literal></link> + configuration setting. <literal>0</literal> means no + timeout.</para></listitem> + +</varlistentry> + +<varlistentry><term><option>--keep-going</option> / <option>-k</option></term> + + <listitem><para>Keep going in case of failed builds, to the + greatest extent possible. That is, if building an input of some + derivation fails, Nix will still build the other inputs, but not the + derivation itself. Without this option, Nix stops if any build + fails (except for builds of substitutes), possibly killing builds in + progress (in case of parallel or distributed builds).</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--keep-failed</option> / <option>-K</option></term> + + <listitem><para>Specifies that in case of a build failure, the + temporary directory (usually in <filename>/tmp</filename>) in which + the build takes place should not be deleted. The path of the build + directory is printed as an informational message. + </para> + </listitem> +</varlistentry> + + +<varlistentry><term><option>--fallback</option></term> + + <listitem> + + <para>Whenever Nix attempts to build a derivation for which + substitutes are known for each output path, but realising the output + paths through the substitutes fails, fall back on building the + derivation.</para> + + <para>The most common scenario in which this is useful is when we + have registered substitutes in order to perform binary distribution + from, say, a network repository. If the repository is down, the + realisation of the derivation will fail. When this option is + specified, Nix will build the derivation instead. Thus, + installation from binaries falls back on installation from source. + This option is not the default since it is generally not desirable + for a transient failure in obtaining the substitutes to lead to a + full build from source (with the related consumption of + resources).</para> + + </listitem> + +</varlistentry> + +<varlistentry><term><option>--no-build-hook</option></term> + + <listitem> + + <para>Disables the build hook mechanism. This allows to ignore remote + builders if they are setup on the machine.</para> + + <para>It's useful in cases where the bandwidth between the client and the + remote builder is too low. In that case it can take more time to upload the + sources to the remote builder and fetch back the result than to do the + computation locally.</para> + + </listitem> + +</varlistentry> + + + +<varlistentry><term><option>--readonly-mode</option></term> + + <listitem><para>When this option is used, no attempt is made to open + the Nix database. Most Nix operations do need database access, so + those operations will fail.</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></term> + + <listitem><para>This option is accepted by + <command>nix-env</command>, <command>nix-instantiate</command> and + <command>nix-build</command>. When evaluating Nix expressions, the + expression evaluator will automatically try to call functions that + it encounters. It can automatically call functions for which every + argument has a <link linkend='ss-functions'>default value</link> + (e.g., <literal>{ <replaceable>argName</replaceable> ? + <replaceable>defaultValue</replaceable> }: + <replaceable>...</replaceable></literal>). With + <option>--arg</option>, you can also call functions that have + arguments without a default value (or override a default value). + That is, if the evaluator encounters a function with an argument + named <replaceable>name</replaceable>, it will call it with value + <replaceable>value</replaceable>.</para> + + <para>For instance, the top-level <literal>default.nix</literal> in + Nixpkgs is actually a function: + +<programlisting> +{ # The system (e.g., `i686-linux') for which to build the packages. + system ? builtins.currentSystem + <replaceable>...</replaceable> +}: <replaceable>...</replaceable></programlisting> + + So if you call this Nix expression (e.g., when you do + <literal>nix-env -i <replaceable>pkgname</replaceable></literal>), + the function will be called automatically using the value <link + linkend='builtin-currentSystem'><literal>builtins.currentSystem</literal></link> + for the <literal>system</literal> argument. You can override this + using <option>--arg</option>, e.g., <literal>nix-env -i + <replaceable>pkgname</replaceable> --arg system + \"i686-freebsd\"</literal>. (Note that since the argument is a Nix + string literal, you have to escape the quotes.)</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--argstr</option> <replaceable>name</replaceable> <replaceable>value</replaceable></term> + + <listitem><para>This option is like <option>--arg</option>, only the + value is not a Nix expression but a string. So instead of + <literal>--arg system \"i686-linux\"</literal> (the outer quotes are + to keep the shell happy) you can say <literal>--argstr system + i686-linux</literal>.</para></listitem> + +</varlistentry> + + +<varlistentry xml:id="opt-attr"><term><option>--attr</option> / <option>-A</option> +<replaceable>attrPath</replaceable></term> + + <listitem><para>Select an attribute from the top-level Nix + expression being evaluated. (<command>nix-env</command>, + <command>nix-instantiate</command>, <command>nix-build</command> and + <command>nix-shell</command> only.) The <emphasis>attribute + path</emphasis> <replaceable>attrPath</replaceable> is a sequence of + attribute names separated by dots. For instance, given a top-level + Nix expression <replaceable>e</replaceable>, the attribute path + <literal>xorg.xorgserver</literal> would cause the expression + <literal><replaceable>e</replaceable>.xorg.xorgserver</literal> to + be used. See <link + linkend='refsec-nix-env-install-examples'><command>nix-env + --install</command></link> for some concrete examples.</para> + + <para>In addition to attribute names, you can also specify array + indices. For instance, the attribute path + <literal>foo.3.bar</literal> selects the <literal>bar</literal> + attribute of the fourth element of the array in the + <literal>foo</literal> attribute of the top-level + expression.</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--expr</option> / <option>-E</option></term> + + <listitem><para>Interpret the command line arguments as a list of + Nix expressions to be parsed and evaluated, rather than as a list + of file names of Nix expressions. + (<command>nix-instantiate</command>, <command>nix-build</command> + and <command>nix-shell</command> only.)</para></listitem> + +</varlistentry> + + +<varlistentry xml:id="opt-I"><term><option>-I</option> <replaceable>path</replaceable></term> + + <listitem><para>Add a path to the Nix expression search path. This + option may be given multiple times. See the <envar + linkend="env-NIX_PATH">NIX_PATH</envar> environment variable for + information on the semantics of the Nix search path. Paths added + through <option>-I</option> take precedence over + <envar>NIX_PATH</envar>.</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--option</option> <replaceable>name</replaceable> <replaceable>value</replaceable></term> + + <listitem><para>Set the Nix configuration option + <replaceable>name</replaceable> to <replaceable>value</replaceable>. + This overrides settings in the Nix configuration file (see + <citerefentry><refentrytitle>nix.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).</para></listitem> + +</varlistentry> + + +<varlistentry><term><option>--repair</option></term> + + <listitem><para>Fix corrupted or missing store paths by + redownloading or rebuilding them. Note that this is slow because it + requires computing a cryptographic hash of the contents of every + path in the closure of the build. Also note the warning under + <command>nix-store --repair-path</command>.</para></listitem> + +</varlistentry> + + +</variablelist> + + +</chapter> diff --git a/third_party/nix/doc/manual/command-ref/opt-inst-syn.xml b/third_party/nix/doc/manual/command-ref/opt-inst-syn.xml new file mode 100644 index 000000000000..e8c3f1ec6f04 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/opt-inst-syn.xml @@ -0,0 +1,22 @@ +<nop xmlns="http://docbook.org/ns/docbook"> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--prebuilt-only</option></arg> + <arg choice='plain'><option>-b</option></arg> + </group> + </arg> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + </arg> + + <arg><option>--from-expression</option></arg> + <arg><option>-E</option></arg> + + <arg><option>--from-profile</option> <replaceable>path</replaceable></arg> + +</nop> diff --git a/third_party/nix/doc/manual/command-ref/utilities.xml b/third_party/nix/doc/manual/command-ref/utilities.xml new file mode 100644 index 000000000000..893f5b5b5260 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/utilities.xml @@ -0,0 +1,20 @@ +<chapter xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id='ch-utilities'> + +<title>Utilities</title> + +<para>This section lists utilities that you can use when you +work with Nix.</para> + +<xi:include href="nix-channel.xml" /> +<xi:include href="nix-collect-garbage.xml" /> +<xi:include href="nix-copy-closure.xml" /> +<xi:include href="nix-daemon.xml" /> +<xi:include href="nix-hash.xml" /> +<xi:include href="nix-instantiate.xml" /> +<xi:include href="nix-prefetch-url.xml" /> + +</chapter> |