diff options
Diffstat (limited to 'third_party/nix/doc/manual/command-ref/nix-env.xml')
| -rw-r--r-- | third_party/nix/doc/manual/command-ref/nix-env.xml | 1505 |
1 files changed, 1505 insertions, 0 deletions
diff --git a/third_party/nix/doc/manual/command-ref/nix-env.xml b/third_party/nix/doc/manual/command-ref/nix-env.xml new file mode 100644 index 000000000000..d257a5e49c70 --- /dev/null +++ b/third_party/nix/doc/manual/command-ref/nix-env.xml @@ -0,0 +1,1505 @@ +<refentry xmlns="http://docbook.org/ns/docbook" + xmlns:xlink="http://www.w3.org/1999/xlink" + xmlns:xi="http://www.w3.org/2001/XInclude" + version="5.0" + xml:id="sec-nix-env"> + +<refmeta> + <refentrytitle>nix-env</refentrytitle> + <manvolnum>1</manvolnum> + <refmiscinfo class="source">Nix</refmiscinfo> + <refmiscinfo class="version"><xi:include href="../version.txt" parse="text"/></refmiscinfo> +</refmeta> + +<refnamediv> + <refname>nix-env</refname> + <refpurpose>manipulate or query Nix user environments</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>nix-env</command> + <xi:include href="opt-common-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <arg><option>--arg</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg><option>--argstr</option> <replaceable>name</replaceable> <replaceable>value</replaceable></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--file</option></arg> + <arg choice='plain'><option>-f</option></arg> + </group> + <replaceable>path</replaceable> + </arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--profile</option></arg> + <arg choice='plain'><option>-p</option></arg> + </group> + <replaceable>path</replaceable> + </arg> + <arg> + <arg choice='plain'><option>--system-filter</option></arg> + <replaceable>system</replaceable> + </arg> + <arg><option>--dry-run</option></arg> + <arg choice='plain'><replaceable>operation</replaceable></arg> + <arg rep='repeat'><replaceable>options</replaceable></arg> + <arg rep='repeat'><replaceable>arguments</replaceable></arg> + </cmdsynopsis> +</refsynopsisdiv> + + +<refsection><title>Description</title> + +<para>The command <command>nix-env</command> is used to manipulate Nix +user environments. User environments are sets of software packages +available to a user at some point in time. In other words, they are a +synthesised view of the programs available in the Nix store. There +may be many user environments: different users can have different +environments, and individual users can switch between different +environments.</para> + +<para><command>nix-env</command> takes exactly one +<emphasis>operation</emphasis> flag which indicates the subcommand to +be performed. These are documented below.</para> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Selectors</title> + +<para>Several commands, such as <command>nix-env -q</command> and +<command>nix-env -i</command>, take a list of arguments that specify +the packages on which to operate. These are extended regular +expressions that must match the entire name of the package. (For +details on regular expressions, see +<citerefentry><refentrytitle>regex</refentrytitle><manvolnum>7</manvolnum></citerefentry>.) +The match is case-sensitive. The regular expression can optionally be +followed by a dash and a version number; if omitted, any version of +the package will match. Here are some examples: + +<variablelist> + + <varlistentry> + <term><literal>firefox</literal></term> + <listitem><para>Matches the package name + <literal>firefox</literal> and any version.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>firefox-32.0</literal></term> + <listitem><para>Matches the package name + <literal>firefox</literal> and version + <literal>32.0</literal>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>gtk\\+</literal></term> + <listitem><para>Matches the package name + <literal>gtk+</literal>. The <literal>+</literal> character must + be escaped using a backslash to prevent it from being interpreted + as a quantifier, and the backslash must be escaped in turn with + another backslash to ensure that the shell passes it + on.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>.\*</literal></term> + <listitem><para>Matches any package name. This is the default for + most commands.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>'.*zip.*'</literal></term> + <listitem><para>Matches any package name containing the string + <literal>zip</literal>. Note the dots: <literal>'*zip*'</literal> + does not work, because in a regular expression, the character + <literal>*</literal> is interpreted as a + quantifier.</para></listitem> + </varlistentry> + + <varlistentry> + <term><literal>'.*(firefox|chromium).*'</literal></term> + <listitem><para>Matches any package name containing the strings + <literal>firefox</literal> or + <literal>chromium</literal>.</para></listitem> + </varlistentry> + +</variablelist> + +</para> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Common options</title> + +<para>This section lists the options that are common to all +operations. These options are allowed for every subcommand, though +they may not always have an effect. <phrase condition="manual">See +also <xref linkend="sec-common-options" />.</phrase></para> + +<variablelist> + + <varlistentry><term><option>--file</option> / <option>-f</option> <replaceable>path</replaceable></term> + + <listitem><para>Specifies the Nix expression (designated below as + the <emphasis>active Nix expression</emphasis>) used by the + <option>--install</option>, <option>--upgrade</option>, and + <option>--query --available</option> operations to obtain + derivations. The default is + <filename>~/.nix-defexpr</filename>.</para> + + <para>If the argument starts with <literal>http://</literal> or + <literal>https://</literal>, it is interpreted as the URL of a + tarball that will be downloaded and unpacked to a temporary + location. The tarball must include a single top-level directory + containing at least a file named <filename>default.nix</filename>.</para> + + </listitem> + + </varlistentry> + + <varlistentry><term><option>--profile</option> / <option>-p</option> <replaceable>path</replaceable></term> + + <listitem><para>Specifies the profile to be used by those + operations that operate on a profile (designated below as the + <emphasis>active profile</emphasis>). A profile is a sequence of + user environments called <emphasis>generations</emphasis>, one of + which is the <emphasis>current + generation</emphasis>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--dry-run</option></term> + + <listitem><para>For the <option>--install</option>, + <option>--upgrade</option>, <option>--uninstall</option>, + <option>--switch-generation</option>, + <option>--delete-generations</option> and + <option>--rollback</option> operations, this flag will cause + <command>nix-env</command> to print what + <emphasis>would</emphasis> be done if this flag had not been + specified, without actually doing it.</para> + + <para><option>--dry-run</option> also prints out which paths will + be <link linkend="gloss-substitute">substituted</link> (i.e., + downloaded) and which paths will be built from source (because no + substitute is available).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--system-filter</option> <replaceable>system</replaceable></term> + + <listitem><para>By default, operations such as <option>--query + --available</option> show derivations matching any platform. This + option allows you to use derivations for the specified platform + <replaceable>system</replaceable>.</para></listitem> + + </varlistentry> + +</variablelist> + +<variablelist condition="manpage"> + <xi:include href="opt-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='opt-common']/*)" /> +</variablelist> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Files</title> + +<variablelist> + + <varlistentry><term><filename>~/.nix-defexpr</filename></term> + + <listitem><para>The source for the default Nix + expressions used by the <option>--install</option>, + <option>--upgrade</option>, and <option>--query + --available</option> operations to obtain derivations. The + <option>--file</option> option may be used to override this + default.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a file, + it is loaded as a Nix expression. If the expression + is a set, it is used as the default Nix expression. + If the expression is a function, an empty set is passed + as argument and the return value is used as + the default Nix expression.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a directory + containing a <filename>default.nix</filename> file, that file + is loaded as in the above paragraph.</para> + + <para>If <filename>~/.nix-defexpr</filename> is a directory without + a <filename>default.nix</filename> file, then its contents + (both files and subdirectories) are loaded as Nix expressions. + The expressions are combined into a single set, each expression + under an attribute with the same name as the original file + or subdirectory. + </para> + + <para>For example, if <filename>~/.nix-defexpr</filename> contains + two files, <filename>foo.nix</filename> and <filename>bar.nix</filename>, + then the default Nix expression will essentially be + +<programlisting> +{ + foo = import ~/.nix-defexpr/foo.nix; + bar = import ~/.nix-defexpr/bar.nix; +}</programlisting> + + </para> + + <para>The file <filename>manifest.nix</filename> is always ignored. + Subdirectories without a <filename>default.nix</filename> file + are traversed recursively in search of more Nix expressions, + but the names of these intermediate directories are not + added to the attribute paths of the default Nix expression.</para> + + <para>The command <command>nix-channel</command> places symlinks + to the downloaded Nix expressions from each subscribed channel in + this directory.</para> + </listitem> + + </varlistentry> + + <varlistentry><term><filename>~/.nix-profile</filename></term> + + <listitem><para>A symbolic link to the user's current profile. By + default, this symlink points to + <filename><replaceable>prefix</replaceable>/var/nix/profiles/default</filename>. + The <envar>PATH</envar> environment variable should include + <filename>~/.nix-profile/bin</filename> for the user environment + to be visible to the user.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-install"><title>Operation <option>--install</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--install</option></arg> + <arg choice='plain'><option>-i</option></arg> + </group> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-inst-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <group choice='opt'> + <arg choice='plain'><option>--preserve-installed</option></arg> + <arg choice='plain'><option>-P</option></arg> + </group> + <group choice='opt'> + <arg choice='plain'><option>--remove-all</option></arg> + <arg choice='plain'><option>-r</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>args</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>The install operation creates a new user environment, based on +the current generation of the active profile, to which a set of store +paths described by <replaceable>args</replaceable> is added. The +arguments <replaceable>args</replaceable> map to store paths in a +number of possible ways: + +<itemizedlist> + + <listitem><para>By default, <replaceable>args</replaceable> is a set + of derivation names denoting derivations in the active Nix + expression. These are realised, and the resulting output paths are + installed. Currently installed derivations with a name equal to the + name of a derivation being added are removed unless the option + <option>--preserve-installed</option> is + specified.</para> + + <para>If there are multiple derivations matching a name in + <replaceable>args</replaceable> that have the same name (e.g., + <literal>gcc-3.3.6</literal> and <literal>gcc-4.1.1</literal>), then + the derivation with the highest <emphasis>priority</emphasis> is + used. A derivation can define a priority by declaring the + <varname>meta.priority</varname> attribute. This attribute should + be a number, with a higher value denoting a lower priority. The + default priority is <literal>0</literal>.</para> + + <para>If there are multiple matching derivations with the same + priority, then the derivation with the highest version will be + installed.</para> + + <para>You can force the installation of multiple derivations with + the same name by being specific about the versions. For instance, + <literal>nix-env -i gcc-3.3.6 gcc-4.1.1</literal> will install both + version of GCC (and will probably cause a user environment + conflict!).</para></listitem> + + <listitem><para>If <link + linkend='opt-attr'><option>--attr</option></link> + (<option>-A</option>) is specified, the arguments are + <emphasis>attribute paths</emphasis> that select attributes from the + top-level Nix expression. This is faster than using derivation + names and unambiguous. To find out the attribute paths of available + packages, use <literal>nix-env -qaP</literal>.</para></listitem> + + <listitem><para>If <option>--from-profile</option> + <replaceable>path</replaceable> is given, + <replaceable>args</replaceable> is a set of names denoting installed + store paths in the profile <replaceable>path</replaceable>. This is + an easy way to copy user environment elements from one profile to + another.</para></listitem> + + <listitem><para>If <option>--from-expression</option> is given, + <replaceable>args</replaceable> are Nix <link + linkend="ss-functions">functions</link> that are called with the + active Nix expression as their single argument. The derivations + returned by those function calls are installed. This allows + derivations to be specified in an unambiguous way, which is necessary + if there are multiple derivations with the same + name.</para></listitem> + + <listitem><para>If <replaceable>args</replaceable> are store + derivations, then these are <link + linkend="rsec-nix-store-realise">realised</link>, and the resulting + output paths are installed.</para></listitem> + + <listitem><para>If <replaceable>args</replaceable> are store paths + that are not store derivations, then these are <link + linkend="rsec-nix-store-realise">realised</link> and + installed.</para></listitem> + + <listitem><para>By default all outputs are installed for each derivation. + That can be reduced by setting <literal>meta.outputsToInstall</literal>. + </para></listitem> <!-- TODO: link nixpkgs docs on the ability to override those. --> + +</itemizedlist> + +</para> + +</refsection> + + +<refsection><title>Flags</title> + +<variablelist> + + <varlistentry><term><option>--prebuilt-only</option> / <option>-b</option></term> + + <listitem><para>Use only derivations for which a substitute is + registered, i.e., there is a pre-built binary available that can + be downloaded in lieu of building the derivation. Thus, no + packages will be built from source.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--preserve-installed</option></term> + <term><option>-P</option></term> + + <listitem><para>Do not remove derivations with a name matching one + of the derivations being installed. Usually, trying to have two + versions of the same package installed in the same generation of a + profile will lead to an error in building the generation, due to + file name clashes between the two versions. However, this is not + the case for all packages.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--remove-all</option></term> + <term><option>-r</option></term> + + <listitem><para>Remove all previously installed packages first. + This is equivalent to running <literal>nix-env -e '.*'</literal> + first, except that everything happens in a single + transaction.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection xml:id='refsec-nix-env-install-examples'><title>Examples</title> + +<para>To install a specific version of <command>gcc</command> from the +active Nix expression: + +<screen> +$ nix-env --install gcc-3.3.2 +installing `gcc-3.3.2' +uninstalling `gcc-3.1'</screen> + +Note the previously installed version is removed, since +<option>--preserve-installed</option> was not specified.</para> + +<para>To install an arbitrary version: + +<screen> +$ nix-env --install gcc +installing `gcc-3.3.2'</screen> + +</para> + +<para>To install using a specific attribute: + +<screen> +$ nix-env -i -A gcc40mips +$ nix-env -i -A xorg.xorgserver</screen> + +</para> + +<para>To install all derivations in the Nix expression <filename>foo.nix</filename>: + +<screen> +$ nix-env -f ~/foo.nix -i '.*'</screen> + +</para> + +<para>To copy the store path with symbolic name <literal>gcc</literal> +from another profile: + +<screen> +$ nix-env -i --from-profile /nix/var/nix/profiles/foo gcc</screen> + +</para> + +<para>To install a specific store derivation (typically created by +<command>nix-instantiate</command>): + +<screen> +$ nix-env -i /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv</screen> + +</para> + +<para>To install a specific output path: + +<screen> +$ nix-env -i /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3</screen> + +</para> + +<para>To install from a Nix expression specified on the command-line: + +<screen> +$ nix-env -f ./foo.nix -i -E \ + 'f: (f {system = "i686-linux";}).subversionWithJava'</screen> + +I.e., this evaluates to <literal>(f: (f {system = +"i686-linux";}).subversionWithJava) (import ./foo.nix)</literal>, thus +selecting the <literal>subversionWithJava</literal> attribute from the +set returned by calling the function defined in +<filename>./foo.nix</filename>.</para> + +<para>A dry-run tells you which paths will be downloaded or built from +source: + +<screen> +$ nix-env -f '<nixpkgs>' -iA hello --dry-run +(dry run; not doing anything) +installing ‘hello-2.10’ +these paths will be fetched (0.04 MiB download, 0.19 MiB unpacked): + /nix/store/wkhdf9jinag5750mqlax6z2zbwhqb76n-hello-2.10 + <replaceable>...</replaceable></screen> + +</para> + +<para>To install Firefox from the latest revision in the Nixpkgs/NixOS +14.12 channel: + +<screen> +$ nix-env -f https://github.com/NixOS/nixpkgs-channels/archive/nixos-14.12.tar.gz -iA firefox +</screen> + +(The GitHub repository <literal>nixpkgs-channels</literal> is updated +automatically from the main <literal>nixpkgs</literal> repository +after certain tests have succeeded and binaries have been built and +uploaded to the binary cache at <uri>cache.nixos.org</uri>.)</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-upgrade"><title>Operation <option>--upgrade</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--upgrade</option></arg> + <arg choice='plain'><option>-u</option></arg> + </group> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="opt-inst-syn.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(/db:nop/*)" /> + <group choice='opt'> + <arg choice='plain'><option>--lt</option></arg> + <arg choice='plain'><option>--leq</option></arg> + <arg choice='plain'><option>--eq</option></arg> + <arg choice='plain'><option>--always</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>args</replaceable></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>The upgrade operation creates a new user environment, based on +the current generation of the active profile, in which all store paths +are replaced for which there are newer versions in the set of paths +described by <replaceable>args</replaceable>. Paths for which there +are no newer versions are left untouched; this is not an error. It is +also not an error if an element of <replaceable>args</replaceable> +matches no installed derivations.</para> + +<para>For a description of how <replaceable>args</replaceable> is +mapped to a set of store paths, see <link +linkend="rsec-nix-env-install"><option>--install</option></link>. If +<replaceable>args</replaceable> describes multiple store paths with +the same symbolic name, only the one with the highest version is +installed.</para> + +</refsection> + +<refsection><title>Flags</title> + +<variablelist> + + <varlistentry><term><option>--lt</option></term> + + <listitem><para>Only upgrade a derivation to newer versions. This + is the default.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--leq</option></term> + + <listitem><para>In addition to upgrading to newer versions, also + “upgrade” to derivations that have the same version. Version are + not a unique identification of a derivation, so there may be many + derivations that have the same version. This flag may be useful + to force “synchronisation” between the installed and available + derivations.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--eq</option></term> + + <listitem><para><emphasis>Only</emphasis> “upgrade” to derivations + that have the same version. This may not seem very useful, but it + actually is, e.g., when there is a new release of Nixpkgs and you + want to replace installed applications with the same versions + built against newer dependencies (to reduce the number of + dependencies floating around on your system).</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--always</option></term> + + <listitem><para>In addition to upgrading to newer versions, also + “upgrade” to derivations that have the same or a lower version. + I.e., derivations may actually be downgraded depending on what is + available in the active Nix expression.</para></listitem> + + </varlistentry> + +</variablelist> + +<para>For the other flags, see <option +linkend="rsec-nix-env-install">--install</option>.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --upgrade gcc +upgrading `gcc-3.3.1' to `gcc-3.4' + +$ nix-env -u gcc-3.3.2 --always <lineannotation>(switch to a specific version)</lineannotation> +upgrading `gcc-3.4' to `gcc-3.3.2' + +$ nix-env --upgrade pan +<lineannotation>(no upgrades available, so nothing happens)</lineannotation> + +$ nix-env -u <lineannotation>(try to upgrade everything)</lineannotation> +upgrading `hello-2.1.2' to `hello-2.1.3' +upgrading `mozilla-1.2' to `mozilla-1.4'</screen> + +</refsection> + +<refsection xml:id="ssec-version-comparisons"><title>Versions</title> + +<para>The upgrade operation determines whether a derivation +<varname>y</varname> is an upgrade of a derivation +<varname>x</varname> by looking at their respective +<literal>name</literal> attributes. The names (e.g., +<literal>gcc-3.3.1</literal> are split into two parts: the package +name (<literal>gcc</literal>), and the version +(<literal>3.3.1</literal>). The version part starts after the first +dash not followed by a letter. <varname>x</varname> is considered an +upgrade of <varname>y</varname> if their package names match, and the +version of <varname>y</varname> is higher that that of +<varname>x</varname>.</para> + +<para>The versions are compared by splitting them into contiguous +components of numbers and letters. E.g., <literal>3.3.1pre5</literal> +is split into <literal>[3, 3, 1, "pre", 5]</literal>. These lists are +then compared lexicographically (from left to right). Corresponding +components <varname>a</varname> and <varname>b</varname> are compared +as follows. If they are both numbers, integer comparison is used. If +<varname>a</varname> is an empty string and <varname>b</varname> is a +number, <varname>a</varname> is considered less than +<varname>b</varname>. The special string component +<literal>pre</literal> (for <emphasis>pre-release</emphasis>) is +considered to be less than other components. String components are +considered less than number components. Otherwise, they are compared +lexicographically (i.e., using case-sensitive string comparison).</para> + +<para>This is illustrated by the following examples: + +<screen> +1.0 < 2.3 +2.1 < 2.3 +2.3 = 2.3 +2.5 > 2.3 +3.1 > 2.3 +2.3.1 > 2.3 +2.3.1 > 2.3a +2.3pre1 < 2.3 +2.3pre3 < 2.3pre12 +2.3a < 2.3c +2.3pre1 < 2.3c +2.3pre1 < 2.3q</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--uninstall</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--uninstall</option></arg> + <arg choice='plain'><option>-e</option></arg> + </group> + <arg choice='plain' rep='repeat'><replaceable>drvnames</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The uninstall operation creates a new user environment, based on +the current generation of the active profile, from which the store +paths designated by the symbolic names +<replaceable>names</replaceable> are removed.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --uninstall gcc +$ nix-env -e '.*' <lineannotation>(remove everything)</lineannotation></screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-set"><title>Operation <option>--set</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--set</option></arg> + <arg choice='plain'><replaceable>drvname</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The <option>--set</option> operation modifies the current generation of a +profile so that it contains exactly the specified derivation, and nothing else. +</para> + +</refsection> + +<refsection><title>Examples</title> + +<para> +The following updates a profile such that its current generation will contain +just Firefox: + +<screen> +$ nix-env -p /nix/var/nix/profiles/browser --set firefox</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection xml:id="rsec-nix-env-set-flag"><title>Operation <option>--set-flag</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--set-flag</option></arg> + <arg choice='plain'><replaceable>name</replaceable></arg> + <arg choice='plain'><replaceable>value</replaceable></arg> + <arg choice='plain' rep='repeat'><replaceable>drvnames</replaceable></arg> +</cmdsynopsis> +</refsection> + +<refsection><title>Description</title> + +<para>The <option>--set-flag</option> operation allows meta attributes +of installed packages to be modified. There are several attributes +that can be usefully modified, because they affect the behaviour of +<command>nix-env</command> or the user environment build +script: + +<itemizedlist> + + <listitem><para><varname>priority</varname> can be changed to + resolve filename clashes. The user environment build script uses + the <varname>meta.priority</varname> attribute of derivations to + resolve filename collisions between packages. Lower priority values + denote a higher priority. For instance, the GCC wrapper package and + the Binutils package in Nixpkgs both have a file + <filename>bin/ld</filename>, so previously if you tried to install + both you would get a collision. Now, on the other hand, the GCC + wrapper declares a higher priority than Binutils, so the former’s + <filename>bin/ld</filename> is symlinked in the user + environment.</para></listitem> + + <listitem><para><varname>keep</varname> can be set to + <literal>true</literal> to prevent the package from being upgraded + or replaced. This is useful if you want to hang on to an older + version of a package.</para></listitem> + + <listitem><para><varname>active</varname> can be set to + <literal>false</literal> to “disable” the package. That is, no + symlinks will be generated to the files of the package, but it + remains part of the profile (so it won’t be garbage-collected). It + can be set back to <literal>true</literal> to re-enable the + package.</para></listitem> + +</itemizedlist> + +</para> + +</refsection> + +<refsection><title>Examples</title> + +<para>To prevent the currently installed Firefox from being upgraded: + +<screen> +$ nix-env --set-flag keep true firefox</screen> + +After this, <command>nix-env -u</command> will ignore Firefox.</para> + +<para>To disable the currently installed Firefox, then install a new +Firefox while the old remains part of the profile: + +<screen> +$ nix-env -q +firefox-2.0.0.9 <lineannotation>(the current one)</lineannotation> + +$ nix-env --preserve-installed -i firefox-2.0.0.11 +installing `firefox-2.0.0.11' +building path(s) `/nix/store/myy0y59q3ig70dgq37jqwg1j0rsapzsl-user-environment' +collision between `/nix/store/<replaceable>...</replaceable>-firefox-2.0.0.11/bin/firefox' + and `/nix/store/<replaceable>...</replaceable>-firefox-2.0.0.9/bin/firefox'. +<lineannotation>(i.e., can’t have two active at the same time)</lineannotation> + +$ nix-env --set-flag active false firefox +setting flag on `firefox-2.0.0.9' + +$ nix-env --preserve-installed -i firefox-2.0.0.11 +installing `firefox-2.0.0.11' + +$ nix-env -q +firefox-2.0.0.11 <lineannotation>(the enabled one)</lineannotation> +firefox-2.0.0.9 <lineannotation>(the disabled one)</lineannotation></screen> + +</para> + +<para>To make files from <literal>binutils</literal> take precedence +over files from <literal>gcc</literal>: + +<screen> +$ nix-env --set-flag priority 5 binutils +$ nix-env --set-flag priority 10 gcc</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--query</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--query</option></arg> + <arg choice='plain'><option>-q</option></arg> + </group> + <group choice='opt'> + <arg choice='plain'><option>--installed</option></arg> + <arg choice='plain'><option>--available</option></arg> + <arg choice='plain'><option>-a</option></arg> + </group> + + <sbr /> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--status</option></arg> + <arg choice='plain'><option>-s</option></arg> + </group> + </arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr-path</option></arg> + <arg choice='plain'><option>-P</option></arg> + </group> + </arg> + <arg><option>--no-name</option></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--compare-versions</option></arg> + <arg choice='plain'><option>-c</option></arg> + </group> + </arg> + <arg><option>--system</option></arg> + <arg><option>--drv-path</option></arg> + <arg><option>--out-path</option></arg> + <arg><option>--description</option></arg> + <arg><option>--meta</option></arg> + + <sbr /> + + <arg><option>--xml</option></arg> + <arg><option>--json</option></arg> + <arg> + <group choice='req'> + <arg choice='plain'><option>--prebuilt-only</option></arg> + <arg choice='plain'><option>-b</option></arg> + </group> + </arg> + + <arg> + <group choice='req'> + <arg choice='plain'><option>--attr</option></arg> + <arg choice='plain'><option>-A</option></arg> + </group> + <replaceable>attribute-path</replaceable> + </arg> + + <sbr /> + + <arg choice='plain' rep='repeat'><replaceable>names</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>The query operation displays information about either the store +paths that are installed in the current generation of the active +profile (<option>--installed</option>), or the derivations that are +available for installation in the active Nix expression +(<option>--available</option>). It only prints information about +derivations whose symbolic name matches one of +<replaceable>names</replaceable>.</para> + +<para>The derivations are sorted by their <literal>name</literal> +attributes.</para> + +</refsection> + + +<refsection><title>Source selection</title> + +<para>The following flags specify the set of things on which the query +operates.</para> + +<variablelist> + + <varlistentry><term><option>--installed</option></term> + + <listitem><para>The query operates on the store paths that are + installed in the current generation of the active profile. This + is the default.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--available</option></term> + <term><option>-a</option></term> + + <listitem><para>The query operates on the derivations that are + available in the active Nix expression.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Queries</title> + +<para>The following flags specify what information to display about +the selected derivations. Multiple flags may be specified, in which +case the information is shown in the order given here. Note that the +name of the derivation is shown unless <option>--no-name</option> is +specified.</para> + +<!-- TODO: fix the terminology here; i.e., derivations, store paths, +user environment elements, etc. --> + +<variablelist> + + <varlistentry><term><option>--xml</option></term> + + <listitem><para>Print the result in an XML representation suitable + for automatic processing by other tools. The root element is + called <literal>items</literal>, which contains a + <literal>item</literal> element for each available or installed + derivation. The fields discussed below are all stored in + attributes of the <literal>item</literal> + elements.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--json</option></term> + + <listitem><para>Print the result in a JSON representation suitable + for automatic processing by other tools.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--prebuilt-only</option> / <option>-b</option></term> + + <listitem><para>Show only derivations for which a substitute is + registered, i.e., there is a pre-built binary available that can + be downloaded in lieu of building the derivation. Thus, this + shows all packages that probably can be installed + quickly.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--status</option></term> + <term><option>-s</option></term> + + <listitem><para>Print the <emphasis>status</emphasis> of the + derivation. The status consists of three characters. The first + is <literal>I</literal> or <literal>-</literal>, indicating + whether the derivation is currently installed in the current + generation of the active profile. This is by definition the case + for <option>--installed</option>, but not for + <option>--available</option>. The second is <literal>P</literal> + or <literal>-</literal>, indicating whether the derivation is + present on the system. This indicates whether installation of an + available derivation will require the derivation to be built. The + third is <literal>S</literal> or <literal>-</literal>, indicating + whether a substitute is available for the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--attr-path</option></term> + <term><option>-P</option></term> + + <listitem><para>Print the <emphasis>attribute path</emphasis> of + the derivation, which can be used to unambiguously select it using + the <link linkend="opt-attr"><option>--attr</option> option</link> + available in commands that install derivations like + <literal>nix-env --install</literal>.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--no-name</option></term> + + <listitem><para>Suppress printing of the <literal>name</literal> + attribute of each derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--compare-versions</option> / + <option>-c</option></term> + + <listitem><para>Compare installed versions to available versions, + or vice versa (if <option>--available</option> is given). This is + useful for quickly seeing whether upgrades for installed + packages are available in a Nix expression. A column is added + with the following meaning: + + <variablelist> + + <varlistentry><term><literal><</literal> <replaceable>version</replaceable></term> + + <listitem><para>A newer version of the package is available + or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>=</literal> <replaceable>version</replaceable></term> + + <listitem><para>At most the same version of the package is + available or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>></literal> <replaceable>version</replaceable></term> + + <listitem><para>Only older versions of the package are + available or installed.</para></listitem> + + </varlistentry> + + <varlistentry><term><literal>- ?</literal></term> + + <listitem><para>No version of the package is available or + installed.</para></listitem> + + </varlistentry> + + </variablelist> + + </para></listitem> + + </varlistentry> + + <varlistentry><term><option>--system</option></term> + + <listitem><para>Print the <literal>system</literal> attribute of + the derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--drv-path</option></term> + + <listitem><para>Print the path of the store + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--out-path</option></term> + + <listitem><para>Print the output path of the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--description</option></term> + + <listitem><para>Print a short (one-line) description of the + derivation, if available. The description is taken from the + <literal>meta.description</literal> attribute of the + derivation.</para></listitem> + + </varlistentry> + + <varlistentry><term><option>--meta</option></term> + + <listitem><para>Print all of the meta-attributes of the + derivation. This option is only available with + <option>--xml</option> or <option>--json</option>.</para></listitem> + + </varlistentry> + +</variablelist> + +</refsection> + + +<refsection><title>Examples</title> + +<para>To show installed packages: + +<screen> +$ nix-env -q +bison-1.875c +docbook-xml-4.2 +firefox-1.0.4 +MPlayer-1.0pre7 +ORBit2-2.8.3 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show available packages: + +<screen> +$ nix-env -qa +firefox-1.0.7 +GConf-2.4.0.1 +MPlayer-1.0pre7 +ORBit2-2.8.3 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show the status of available packages: + +<screen> +$ nix-env -qas +-P- firefox-1.0.7 <lineannotation>(not installed but present)</lineannotation> +--S GConf-2.4.0.1 <lineannotation>(not present, but there is a substitute for fast installation)</lineannotation> +--S MPlayer-1.0pre3 <lineannotation>(i.e., this is not the installed MPlayer, even though the version is the same!)</lineannotation> +IP- ORBit2-2.8.3 <lineannotation>(installed and by definition present)</lineannotation> +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show available packages in the Nix expression <filename>foo.nix</filename>: + +<screen> +$ nix-env -f ./foo.nix -qa +foo-1.2.3 +</screen> + +</para> + +<para>To compare installed versions to what’s available: + +<screen> +$ nix-env -qc +<replaceable>...</replaceable> +acrobat-reader-7.0 - ? <lineannotation>(package is not available at all)</lineannotation> +autoconf-2.59 = 2.59 <lineannotation>(same version)</lineannotation> +firefox-1.0.4 < 1.0.7 <lineannotation>(a more recent version is available)</lineannotation> +<replaceable>...</replaceable> +</screen> + +</para> + +<para>To show all packages with “<literal>zip</literal>” in the name: + +<screen> +$ nix-env -qa '.*zip.*' +bzip2-1.0.6 +gzip-1.6 +zip-3.0 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show all packages with “<literal>firefox</literal>” or +“<literal>chromium</literal>” in the name: + +<screen> +$ nix-env -qa '.*(firefox|chromium).*' +chromium-37.0.2062.94 +chromium-beta-38.0.2125.24 +firefox-32.0.3 +firefox-with-plugins-13.0.1 +<replaceable>…</replaceable> +</screen> + +</para> + +<para>To show all packages in the latest revision of the Nixpkgs +repository: + +<screen> +$ nix-env -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz -qa +</screen> + +</para> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--switch-profile</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--switch-profile</option></arg> + <arg choice='plain'><option>-S</option></arg> + </group> + <arg choice='req'><replaceable>path</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation makes <replaceable>path</replaceable> the current +profile for the user. That is, the symlink +<filename>~/.nix-profile</filename> is made to point to +<replaceable>path</replaceable>.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env -S ~/my-profile</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--list-generations</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--list-generations</option></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation print a list of all the currently existing +generations for the active profile. These may be switched to using +the <option>--switch-generation</option> operation. It also prints +the creation date of the generation, and indicates the current +generation.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env --list-generations + 95 2004-02-06 11:48:24 + 96 2004-02-06 11:49:01 + 97 2004-02-06 16:22:45 + 98 2004-02-06 16:24:33 (current)</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--delete-generations</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--delete-generations</option></arg> + <arg choice='plain' rep='repeat'><replaceable>generations</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation deletes the specified generations of the current +profile. The generations can be a list of generation numbers, the +special value <literal>old</literal> to delete all non-current +generations, a value such as <literal>30d</literal> to delete all +generations older than the specified number of days (except for the +generation that was active at that point in time), or a value such as +<literal>+5</literal> to keep the last <literal>5</literal> generations +ignoring any newer than current, e.g., if <literal>30</literal> is the current +generation <literal>+5</literal> will delete generation <literal>25</literal> +and all older generations. +Periodically deleting old generations is important to make garbage collection +effective.</para> + +</refsection> + +<refsection><title>Examples</title> + +<screen> +$ nix-env --delete-generations 3 4 8 + +$ nix-env --delete-generations +5 + +$ nix-env --delete-generations 30d + +$ nix-env -p other_profile --delete-generations old</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--switch-generation</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <group choice='req'> + <arg choice='plain'><option>--switch-generation</option></arg> + <arg choice='plain'><option>-G</option></arg> + </group> + <arg choice='req'><replaceable>generation</replaceable></arg> +</cmdsynopsis> + +</refsection> + + +<refsection><title>Description</title> + +<para>This operation makes generation number +<replaceable>generation</replaceable> the current generation of the +active profile. That is, if the +<filename><replaceable>profile</replaceable></filename> is the path to +the active profile, then the symlink +<filename><replaceable>profile</replaceable></filename> is made to +point to +<filename><replaceable>profile</replaceable>-<replaceable>generation</replaceable>-link</filename>, +which is in turn a symlink to the actual user environment in the Nix +store.</para> + +<para>Switching will fail if the specified generation does not exist.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env -G 42 +switching from generation 50 to 42</screen> + +</refsection> + +</refsection> + + + +<!--######################################################################--> + +<refsection><title>Operation <option>--rollback</option></title> + +<refsection><title>Synopsis</title> + +<cmdsynopsis> + <command>nix-env</command> + <arg choice='plain'><option>--rollback</option></arg> +</cmdsynopsis> + +</refsection> + +<refsection><title>Description</title> + +<para>This operation switches to the “previous” generation of the +active profile, that is, the highest numbered generation lower than +the current generation, if it exists. It is just a convenience +wrapper around <option>--list-generations</option> and +<option>--switch-generation</option>.</para> + +</refsection> + + +<refsection><title>Examples</title> + +<screen> +$ nix-env --rollback +switching from generation 92 to 91 + +$ nix-env --rollback +error: no generation older than the current (91) exists</screen> + +</refsection> + +</refsection> + + +<refsection condition="manpage"><title>Environment variables</title> + +<variablelist> + + <varlistentry><term><envar>NIX_PROFILE</envar></term> + + <listitem><para>Location of the Nix profile. Defaults to the + target of the symlink <filename>~/.nix-profile</filename>, if it + exists, or <filename>/nix/var/nix/profiles/default</filename> + otherwise.</para></listitem> + + </varlistentry> + + <xi:include href="env-common.xml#xmlns(db=http://docbook.org/ns/docbook)xpointer(//db:variablelist[@xml:id='env-common']/*)" /> +</variablelist> + +</refsection> + + +</refentry> |