about summary refs log tree commit diff
path: root/third_party/git/t/test-lib-functions.sh
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/t/test-lib-functions.sh')
-rw-r--r--third_party/git/t/test-lib-functions.sh1545
1 files changed, 1545 insertions, 0 deletions
diff --git a/third_party/git/t/test-lib-functions.sh b/third_party/git/t/test-lib-functions.sh
new file mode 100644
index 000000000000..352c213d52e2
--- /dev/null
+++ b/third_party/git/t/test-lib-functions.sh
@@ -0,0 +1,1545 @@
+# Library of functions shared by all tests scripts, included by
+# test-lib.sh.
+#
+# Copyright (c) 2005 Junio C Hamano
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see http://www.gnu.org/licenses/ .
+
+# The semantics of the editor variables are that of invoking
+# sh -c "$EDITOR \"$@\"" files ...
+#
+# If our trash directory contains shell metacharacters, they will be
+# interpreted if we just set $EDITOR directly, so do a little dance with
+# environment variables to work around this.
+#
+# In particular, quoting isn't enough, as the path may contain the same quote
+# that we're using.
+test_set_editor () {
+	FAKE_EDITOR="$1"
+	export FAKE_EDITOR
+	EDITOR='"$FAKE_EDITOR"'
+	export EDITOR
+}
+
+test_set_index_version () {
+    GIT_INDEX_VERSION="$1"
+    export GIT_INDEX_VERSION
+}
+
+test_decode_color () {
+	awk '
+		function name(n) {
+			if (n == 0) return "RESET";
+			if (n == 1) return "BOLD";
+			if (n == 2) return "FAINT";
+			if (n == 3) return "ITALIC";
+			if (n == 7) return "REVERSE";
+			if (n == 30) return "BLACK";
+			if (n == 31) return "RED";
+			if (n == 32) return "GREEN";
+			if (n == 33) return "YELLOW";
+			if (n == 34) return "BLUE";
+			if (n == 35) return "MAGENTA";
+			if (n == 36) return "CYAN";
+			if (n == 37) return "WHITE";
+			if (n == 40) return "BLACK";
+			if (n == 41) return "BRED";
+			if (n == 42) return "BGREEN";
+			if (n == 43) return "BYELLOW";
+			if (n == 44) return "BBLUE";
+			if (n == 45) return "BMAGENTA";
+			if (n == 46) return "BCYAN";
+			if (n == 47) return "BWHITE";
+		}
+		{
+			while (match($0, /\033\[[0-9;]*m/) != 0) {
+				printf "%s<", substr($0, 1, RSTART-1);
+				codes = substr($0, RSTART+2, RLENGTH-3);
+				if (length(codes) == 0)
+					printf "%s", name(0)
+				else {
+					n = split(codes, ary, ";");
+					sep = "";
+					for (i = 1; i <= n; i++) {
+						printf "%s%s", sep, name(ary[i]);
+						sep = ";"
+					}
+				}
+				printf ">";
+				$0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
+			}
+			print
+		}
+	'
+}
+
+lf_to_nul () {
+	perl -pe 'y/\012/\000/'
+}
+
+nul_to_q () {
+	perl -pe 'y/\000/Q/'
+}
+
+q_to_nul () {
+	perl -pe 'y/Q/\000/'
+}
+
+q_to_cr () {
+	tr Q '\015'
+}
+
+q_to_tab () {
+	tr Q '\011'
+}
+
+qz_to_tab_space () {
+	tr QZ '\011\040'
+}
+
+append_cr () {
+	sed -e 's/$/Q/' | tr Q '\015'
+}
+
+remove_cr () {
+	tr '\015' Q | sed -e 's/Q$//'
+}
+
+# Generate an output of $1 bytes of all zeroes (NULs, not ASCII zeroes).
+# If $1 is 'infinity', output forever or until the receiving pipe stops reading,
+# whichever comes first.
+generate_zero_bytes () {
+	test-tool genzeros "$@"
+}
+
+# In some bourne shell implementations, the "unset" builtin returns
+# nonzero status when a variable to be unset was not set in the first
+# place.
+#
+# Use sane_unset when that should not be considered an error.
+
+sane_unset () {
+	unset "$@"
+	return 0
+}
+
+test_tick () {
+	if test -z "${test_tick+set}"
+	then
+		test_tick=1112911993
+	else
+		test_tick=$(($test_tick + 60))
+	fi
+	GIT_COMMITTER_DATE="$test_tick -0700"
+	GIT_AUTHOR_DATE="$test_tick -0700"
+	export GIT_COMMITTER_DATE GIT_AUTHOR_DATE
+}
+
+# Stop execution and start a shell. This is useful for debugging tests.
+#
+# Be sure to remove all invocations of this command before submitting.
+
+test_pause () {
+	"$SHELL_PATH" <&6 >&5 2>&7
+}
+
+# Wrap git with a debugger. Adding this to a command can make it easier
+# to understand what is going on in a failing test.
+#
+# Examples:
+#     debug git checkout master
+#     debug --debugger=nemiver git $ARGS
+#     debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS
+debug () {
+	case "$1" in
+	-d)
+		GIT_DEBUGGER="$2" &&
+		shift 2
+		;;
+	--debugger=*)
+		GIT_DEBUGGER="${1#*=}" &&
+		shift 1
+		;;
+	*)
+		GIT_DEBUGGER=1
+		;;
+	esac &&
+	GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7
+}
+
+# Call test_commit with the arguments
+# [-C <directory>] <message> [<file> [<contents> [<tag>]]]"
+#
+# This will commit a file with the given contents and the given commit
+# message, and tag the resulting commit with the given tag name.
+#
+# <file>, <contents>, and <tag> all default to <message>.
+#
+# If the first argument is "-C", the second argument is used as a path for
+# the git invocations.
+
+test_commit () {
+	notick= &&
+	signoff= &&
+	indir= &&
+	while test $# != 0
+	do
+		case "$1" in
+		--notick)
+			notick=yes
+			;;
+		--signoff)
+			signoff="$1"
+			;;
+		-C)
+			indir="$2"
+			shift
+			;;
+		*)
+			break
+			;;
+		esac
+		shift
+	done &&
+	indir=${indir:+"$indir"/} &&
+	file=${2:-"$1.t"} &&
+	echo "${3-$1}" > "$indir$file" &&
+	git ${indir:+ -C "$indir"} add "$file" &&
+	if test -z "$notick"
+	then
+		test_tick
+	fi &&
+	git ${indir:+ -C "$indir"} commit $signoff -m "$1" &&
+	git ${indir:+ -C "$indir"} tag "${4:-$1}"
+}
+
+# Call test_merge with the arguments "<message> <commit>", where <commit>
+# can be a tag pointing to the commit-to-merge.
+
+test_merge () {
+	label="$1" &&
+	shift &&
+	test_tick &&
+	git merge -m "$label" "$@" &&
+	git tag "$label"
+}
+
+# Efficiently create <nr> commits, each with a unique number (from 1 to <nr>
+# by default) in the commit message.
+#
+# Usage: test_commit_bulk [options] <nr>
+#   -C <dir>:
+#	Run all git commands in directory <dir>
+#   --ref=<n>:
+#	ref on which to create commits (default: HEAD)
+#   --start=<n>:
+#	number commit messages from <n> (default: 1)
+#   --message=<msg>:
+#	use <msg> as the commit mesasge (default: "commit %s")
+#   --filename=<fn>:
+#	modify <fn> in each commit (default: %s.t)
+#   --contents=<string>:
+#	place <string> in each file (default: "content %s")
+#   --id=<string>:
+#	shorthand to use <string> and %s in message, filename, and contents
+#
+# The message, filename, and contents strings are evaluated by printf, with the
+# first "%s" replaced by the current commit number. So you can do:
+#
+#   test_commit_bulk --filename=file --contents="modification %s"
+#
+# to have every commit touch the same file, but with unique content.
+#
+test_commit_bulk () {
+	tmpfile=.bulk-commit.input
+	indir=.
+	ref=HEAD
+	n=1
+	message='commit %s'
+	filename='%s.t'
+	contents='content %s'
+	while test $# -gt 0
+	do
+		case "$1" in
+		-C)
+			indir=$2
+			shift
+			;;
+		--ref=*)
+			ref=${1#--*=}
+			;;
+		--start=*)
+			n=${1#--*=}
+			;;
+		--message=*)
+			message=${1#--*=}
+			;;
+		--filename=*)
+			filename=${1#--*=}
+			;;
+		--contents=*)
+			contents=${1#--*=}
+			;;
+		--id=*)
+			message="${1#--*=} %s"
+			filename="${1#--*=}-%s.t"
+			contents="${1#--*=} %s"
+			;;
+		-*)
+			BUG "invalid test_commit_bulk option: $1"
+			;;
+		*)
+			break
+			;;
+		esac
+		shift
+	done
+	total=$1
+
+	add_from=
+	if git -C "$indir" rev-parse --quiet --verify "$ref"
+	then
+		add_from=t
+	fi
+
+	while test "$total" -gt 0
+	do
+		test_tick &&
+		echo "commit $ref"
+		printf 'author %s <%s> %s\n' \
+			"$GIT_AUTHOR_NAME" \
+			"$GIT_AUTHOR_EMAIL" \
+			"$GIT_AUTHOR_DATE"
+		printf 'committer %s <%s> %s\n' \
+			"$GIT_COMMITTER_NAME" \
+			"$GIT_COMMITTER_EMAIL" \
+			"$GIT_COMMITTER_DATE"
+		echo "data <<EOF"
+		printf "$message\n" $n
+		echo "EOF"
+		if test -n "$add_from"
+		then
+			echo "from $ref^0"
+			add_from=
+		fi
+		printf "M 644 inline $filename\n" $n
+		echo "data <<EOF"
+		printf "$contents\n" $n
+		echo "EOF"
+		echo
+		n=$((n + 1))
+		total=$((total - 1))
+	done >"$tmpfile"
+
+	git -C "$indir" \
+	    -c fastimport.unpacklimit=0 \
+	    fast-import <"$tmpfile" || return 1
+
+	# This will be left in place on failure, which may aid debugging.
+	rm -f "$tmpfile"
+
+	# If we updated HEAD, then be nice and update the index and working
+	# tree, too.
+	if test "$ref" = "HEAD"
+	then
+		git -C "$indir" checkout -f HEAD || return 1
+	fi
+
+}
+
+# This function helps systems where core.filemode=false is set.
+# Use it instead of plain 'chmod +x' to set or unset the executable bit
+# of a file in the working directory and add it to the index.
+
+test_chmod () {
+	chmod "$@" &&
+	git update-index --add "--chmod=$@"
+}
+
+# Get the modebits from a file.
+test_modebits () {
+	ls -l "$1" | sed -e 's|^\(..........\).*|\1|'
+}
+
+# Unset a configuration variable, but don't fail if it doesn't exist.
+test_unconfig () {
+	config_dir=
+	if test "$1" = -C
+	then
+		shift
+		config_dir=$1
+		shift
+	fi
+	git ${config_dir:+-C "$config_dir"} config --unset-all "$@"
+	config_status=$?
+	case "$config_status" in
+	5) # ok, nothing to unset
+		config_status=0
+		;;
+	esac
+	return $config_status
+}
+
+# Set git config, automatically unsetting it after the test is over.
+test_config () {
+	config_dir=
+	if test "$1" = -C
+	then
+		shift
+		config_dir=$1
+		shift
+	fi
+	test_when_finished "test_unconfig ${config_dir:+-C '$config_dir'} '$1'" &&
+	git ${config_dir:+-C "$config_dir"} config "$@"
+}
+
+test_config_global () {
+	test_when_finished "test_unconfig --global '$1'" &&
+	git config --global "$@"
+}
+
+write_script () {
+	{
+		echo "#!${2-"$SHELL_PATH"}" &&
+		cat
+	} >"$1" &&
+	chmod +x "$1"
+}
+
+# Use test_set_prereq to tell that a particular prerequisite is available.
+# The prerequisite can later be checked for in two ways:
+#
+# - Explicitly using test_have_prereq.
+#
+# - Implicitly by specifying the prerequisite tag in the calls to
+#   test_expect_{success,failure,code}.
+#
+# The single parameter is the prerequisite tag (a simple word, in all
+# capital letters by convention).
+
+test_unset_prereq () {
+	! test_have_prereq "$1" ||
+	satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }"
+}
+
+test_set_prereq () {
+	if test -n "$GIT_TEST_FAIL_PREREQS_INTERNAL"
+	then
+		case "$1" in
+		# The "!" case is handled below with
+		# test_unset_prereq()
+		!*)
+			;;
+		# (Temporary?) whitelist of things we can't easily
+		# pretend not to support
+		SYMLINKS)
+			;;
+		# Inspecting whether GIT_TEST_FAIL_PREREQS is on
+		# should be unaffected.
+		FAIL_PREREQS)
+			;;
+		*)
+			return
+		esac
+	fi
+
+	case "$1" in
+	!*)
+		test_unset_prereq "${1#!}"
+		;;
+	*)
+		satisfied_prereq="$satisfied_prereq$1 "
+		;;
+	esac
+}
+satisfied_prereq=" "
+lazily_testable_prereq= lazily_tested_prereq=
+
+# Usage: test_lazy_prereq PREREQ 'script'
+test_lazy_prereq () {
+	lazily_testable_prereq="$lazily_testable_prereq$1 "
+	eval test_prereq_lazily_$1=\$2
+}
+
+test_run_lazy_prereq_ () {
+	script='
+mkdir -p "$TRASH_DIRECTORY/prereq-test-dir" &&
+(
+	cd "$TRASH_DIRECTORY/prereq-test-dir" &&'"$2"'
+)'
+	say >&3 "checking prerequisite: $1"
+	say >&3 "$script"
+	test_eval_ "$script"
+	eval_ret=$?
+	rm -rf "$TRASH_DIRECTORY/prereq-test-dir"
+	if test "$eval_ret" = 0; then
+		say >&3 "prerequisite $1 ok"
+	else
+		say >&3 "prerequisite $1 not satisfied"
+	fi
+	return $eval_ret
+}
+
+test_have_prereq () {
+	# prerequisites can be concatenated with ','
+	save_IFS=$IFS
+	IFS=,
+	set -- $*
+	IFS=$save_IFS
+
+	total_prereq=0
+	ok_prereq=0
+	missing_prereq=
+
+	for prerequisite
+	do
+		case "$prerequisite" in
+		!*)
+			negative_prereq=t
+			prerequisite=${prerequisite#!}
+			;;
+		*)
+			negative_prereq=
+		esac
+
+		case " $lazily_tested_prereq " in
+		*" $prerequisite "*)
+			;;
+		*)
+			case " $lazily_testable_prereq " in
+			*" $prerequisite "*)
+				eval "script=\$test_prereq_lazily_$prerequisite" &&
+				if test_run_lazy_prereq_ "$prerequisite" "$script"
+				then
+					test_set_prereq $prerequisite
+				fi
+				lazily_tested_prereq="$lazily_tested_prereq$prerequisite "
+			esac
+			;;
+		esac
+
+		total_prereq=$(($total_prereq + 1))
+		case "$satisfied_prereq" in
+		*" $prerequisite "*)
+			satisfied_this_prereq=t
+			;;
+		*)
+			satisfied_this_prereq=
+		esac
+
+		case "$satisfied_this_prereq,$negative_prereq" in
+		t,|,t)
+			ok_prereq=$(($ok_prereq + 1))
+			;;
+		*)
+			# Keep a list of missing prerequisites; restore
+			# the negative marker if necessary.
+			prerequisite=${negative_prereq:+!}$prerequisite
+			if test -z "$missing_prereq"
+			then
+				missing_prereq=$prerequisite
+			else
+				missing_prereq="$prerequisite,$missing_prereq"
+			fi
+		esac
+	done
+
+	test $total_prereq = $ok_prereq
+}
+
+test_declared_prereq () {
+	case ",$test_prereq," in
+	*,$1,*)
+		return 0
+		;;
+	esac
+	return 1
+}
+
+test_verify_prereq () {
+	test -z "$test_prereq" ||
+	expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' ||
+	BUG "'$test_prereq' does not look like a prereq"
+}
+
+test_expect_failure () {
+	test_start_
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	BUG "not 2 or 3 parameters to test-expect-failure"
+	test_verify_prereq
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "checking known breakage of $TEST_NUMBER.$test_count '$1': $2"
+		if test_run_ "$2" expecting_failure
+		then
+			test_known_broken_ok_ "$1"
+		else
+			test_known_broken_failure_ "$1"
+		fi
+	fi
+	test_finish_
+}
+
+test_expect_success () {
+	test_start_
+	test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 2 ||
+	BUG "not 2 or 3 parameters to test-expect-success"
+	test_verify_prereq
+	export test_prereq
+	if ! test_skip "$@"
+	then
+		say >&3 "expecting success of $TEST_NUMBER.$test_count '$1': $2"
+		if test_run_ "$2"
+		then
+			test_ok_ "$1"
+		else
+			test_failure_ "$@"
+		fi
+	fi
+	test_finish_
+}
+
+# test_external runs external test scripts that provide continuous
+# test output about their progress, and succeeds/fails on
+# zero/non-zero exit code.  It outputs the test output on stdout even
+# in non-verbose mode, and announces the external script with "# run
+# <n>: ..." before running it.  When providing relative paths, keep in
+# mind that all scripts run in "trash directory".
+# Usage: test_external description command arguments...
+# Example: test_external 'Perl API' perl ../path/to/test.pl
+test_external () {
+	test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
+	test "$#" = 3 ||
+	BUG "not 3 or 4 parameters to test_external"
+	descr="$1"
+	shift
+	test_verify_prereq
+	export test_prereq
+	if ! test_skip "$descr" "$@"
+	then
+		# Announce the script to reduce confusion about the
+		# test output that follows.
+		say_color "" "# run $test_count: $descr ($*)"
+		# Export TEST_DIRECTORY, TRASH_DIRECTORY and GIT_TEST_LONG
+		# to be able to use them in script
+		export TEST_DIRECTORY TRASH_DIRECTORY GIT_TEST_LONG
+		# Run command; redirect its stderr to &4 as in
+		# test_run_, but keep its stdout on our stdout even in
+		# non-verbose mode.
+		"$@" 2>&4
+		if test "$?" = 0
+		then
+			if test $test_external_has_tap -eq 0; then
+				test_ok_ "$descr"
+			else
+				say_color "" "# test_external test $descr was ok"
+				test_success=$(($test_success + 1))
+			fi
+		else
+			if test $test_external_has_tap -eq 0; then
+				test_failure_ "$descr" "$@"
+			else
+				say_color error "# test_external test $descr failed: $@"
+				test_failure=$(($test_failure + 1))
+			fi
+		fi
+	fi
+}
+
+# Like test_external, but in addition tests that the command generated
+# no output on stderr.
+test_external_without_stderr () {
+	# The temporary file has no (and must have no) security
+	# implications.
+	tmp=${TMPDIR:-/tmp}
+	stderr="$tmp/git-external-stderr.$$.tmp"
+	test_external "$@" 4> "$stderr"
+	test -f "$stderr" || error "Internal error: $stderr disappeared."
+	descr="no stderr: $1"
+	shift
+	say >&3 "# expecting no stderr from previous command"
+	if test ! -s "$stderr"
+	then
+		rm "$stderr"
+
+		if test $test_external_has_tap -eq 0; then
+			test_ok_ "$descr"
+		else
+			say_color "" "# test_external_without_stderr test $descr was ok"
+			test_success=$(($test_success + 1))
+		fi
+	else
+		if test "$verbose" = t
+		then
+			output=$(echo; echo "# Stderr is:"; cat "$stderr")
+		else
+			output=
+		fi
+		# rm first in case test_failure exits.
+		rm "$stderr"
+		if test $test_external_has_tap -eq 0; then
+			test_failure_ "$descr" "$@" "$output"
+		else
+			say_color error "# test_external_without_stderr test $descr failed: $@: $output"
+			test_failure=$(($test_failure + 1))
+		fi
+	fi
+}
+
+# debugging-friendly alternatives to "test [-f|-d|-e]"
+# The commands test the existence or non-existence of $1. $2 can be
+# given to provide a more precise diagnosis.
+test_path_is_file () {
+	if ! test -f "$1"
+	then
+		echo "File $1 doesn't exist. $2"
+		false
+	fi
+}
+
+test_path_is_dir () {
+	if ! test -d "$1"
+	then
+		echo "Directory $1 doesn't exist. $2"
+		false
+	fi
+}
+
+test_path_exists () {
+	if ! test -e "$1"
+	then
+		echo "Path $1 doesn't exist. $2"
+		false
+	fi
+}
+
+# Check if the directory exists and is empty as expected, barf otherwise.
+test_dir_is_empty () {
+	test_path_is_dir "$1" &&
+	if test -n "$(ls -a1 "$1" | egrep -v '^\.\.?$')"
+	then
+		echo "Directory '$1' is not empty, it contains:"
+		ls -la "$1"
+		return 1
+	fi
+}
+
+# Check if the file exists and has a size greater than zero
+test_file_not_empty () {
+	if ! test -s "$1"
+	then
+		echo "'$1' is not a non-empty file."
+		false
+	fi
+}
+
+test_path_is_missing () {
+	if test -e "$1"
+	then
+		echo "Path exists:"
+		ls -ld "$1"
+		if test $# -ge 1
+		then
+			echo "$*"
+		fi
+		false
+	fi
+}
+
+# test_line_count checks that a file has the number of lines it
+# ought to. For example:
+#
+#	test_expect_success 'produce exactly one line of output' '
+#		do something >output &&
+#		test_line_count = 1 output
+#	'
+#
+# is like "test $(wc -l <output) = 1" except that it passes the
+# output through when the number of lines is wrong.
+
+test_line_count () {
+	if test $# != 3
+	then
+		BUG "not 3 parameters to test_line_count"
+	elif ! test $(wc -l <"$3") "$1" "$2"
+	then
+		echo "test_line_count: line count for $3 !$1 $2"
+		cat "$3"
+		return 1
+	fi
+}
+
+# Returns success if a comma separated string of keywords ($1) contains a
+# given keyword ($2).
+# Examples:
+# `list_contains "foo,bar" bar` returns 0
+# `list_contains "foo" bar` returns 1
+
+list_contains () {
+	case ",$1," in
+	*,$2,*)
+		return 0
+		;;
+	esac
+	return 1
+}
+
+# This is not among top-level (test_expect_success | test_expect_failure)
+# but is a prefix that can be used in the test script, like:
+#
+#	test_expect_success 'complain and die' '
+#           do something &&
+#           do something else &&
+#	    test_must_fail git checkout ../outerspace
+#	'
+#
+# Writing this as "! git checkout ../outerspace" is wrong, because
+# the failure could be due to a segv.  We want a controlled failure.
+#
+# Accepts the following options:
+#
+#   ok=<signal-name>[,<...>]:
+#     Don't treat an exit caused by the given signal as error.
+#     Multiple signals can be specified as a comma separated list.
+#     Currently recognized signal names are: sigpipe, success.
+#     (Don't use 'success', use 'test_might_fail' instead.)
+
+test_must_fail () {
+	case "$1" in
+	ok=*)
+		_test_ok=${1#ok=}
+		shift
+		;;
+	*)
+		_test_ok=
+		;;
+	esac
+	"$@" 2>&7
+	exit_code=$?
+	if test $exit_code -eq 0 && ! list_contains "$_test_ok" success
+	then
+		echo >&4 "test_must_fail: command succeeded: $*"
+		return 1
+	elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe
+	then
+		return 0
+	elif test $exit_code -gt 129 && test $exit_code -le 192
+	then
+		echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*"
+		return 1
+	elif test $exit_code -eq 127
+	then
+		echo >&4 "test_must_fail: command not found: $*"
+		return 1
+	elif test $exit_code -eq 126
+	then
+		echo >&4 "test_must_fail: valgrind error: $*"
+		return 1
+	fi
+	return 0
+} 7>&2 2>&4
+
+# Similar to test_must_fail, but tolerates success, too.  This is
+# meant to be used in contexts like:
+#
+#	test_expect_success 'some command works without configuration' '
+#		test_might_fail git config --unset all.configuration &&
+#		do something
+#	'
+#
+# Writing "git config --unset all.configuration || :" would be wrong,
+# because we want to notice if it fails due to segv.
+#
+# Accepts the same options as test_must_fail.
+
+test_might_fail () {
+	test_must_fail ok=success "$@" 2>&7
+} 7>&2 2>&4
+
+# Similar to test_must_fail and test_might_fail, but check that a
+# given command exited with a given exit code. Meant to be used as:
+#
+#	test_expect_success 'Merge with d/f conflicts' '
+#		test_expect_code 1 git merge "merge msg" B master
+#	'
+
+test_expect_code () {
+	want_code=$1
+	shift
+	"$@" 2>&7
+	exit_code=$?
+	if test $exit_code = $want_code
+	then
+		return 0
+	fi
+
+	echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+	return 1
+} 7>&2 2>&4
+
+# test_cmp is a helper function to compare actual and expected output.
+# You can use it like:
+#
+#	test_expect_success 'foo works' '
+#		echo expected >expected &&
+#		foo >actual &&
+#		test_cmp expected actual
+#	'
+#
+# This could be written as either "cmp" or "diff -u", but:
+# - cmp's output is not nearly as easy to read as diff -u
+# - not all diff versions understand "-u"
+
+test_cmp() {
+	$GIT_TEST_CMP "$@"
+}
+
+# Check that the given config key has the expected value.
+#
+#    test_cmp_config [-C <dir>] <expected-value>
+#                    [<git-config-options>...] <config-key>
+#
+# for example to check that the value of core.bar is foo
+#
+#    test_cmp_config foo core.bar
+#
+test_cmp_config() {
+	local GD &&
+	if test "$1" = "-C"
+	then
+		shift &&
+		GD="-C $1" &&
+		shift
+	fi &&
+	printf "%s\n" "$1" >expect.config &&
+	shift &&
+	git $GD config "$@" >actual.config &&
+	test_cmp expect.config actual.config
+}
+
+# test_cmp_bin - helper to compare binary files
+
+test_cmp_bin() {
+	cmp "$@"
+}
+
+# Use this instead of test_cmp to compare files that contain expected and
+# actual output from git commands that can be translated.  When running
+# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ncmp () {
+	! test_have_prereq C_LOCALE_OUTPUT || test_cmp "$@"
+}
+
+# Use this instead of "grep expected-string actual" to see if the
+# output from a git command that can be translated either contains an
+# expected string, or does not contain an unwanted one.  When running
+# under GIT_TEST_GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ngrep () {
+	eval "last_arg=\${$#}"
+
+	test -f "$last_arg" ||
+	BUG "test_i18ngrep requires a file to read as the last parameter"
+
+	if test $# -lt 2 ||
+	   { test "x!" = "x$1" && test $# -lt 3 ; }
+	then
+		BUG "too few parameters to test_i18ngrep"
+	fi
+
+	if test_have_prereq !C_LOCALE_OUTPUT
+	then
+		# pretend success
+		return 0
+	fi
+
+	if test "x!" = "x$1"
+	then
+		shift
+		! grep "$@" && return 0
+
+		echo >&4 "error: '! grep $@' did find a match in:"
+	else
+		grep "$@" && return 0
+
+		echo >&4 "error: 'grep $@' didn't find a match in:"
+	fi
+
+	if test -s "$last_arg"
+	then
+		cat >&4 "$last_arg"
+	else
+		echo >&4 "<File '$last_arg' is empty>"
+	fi
+
+	return 1
+}
+
+# Call any command "$@" but be more verbose about its
+# failure. This is handy for commands like "test" which do
+# not output anything when they fail.
+verbose () {
+	"$@" && return 0
+	echo >&4 "command failed: $(git rev-parse --sq-quote "$@")"
+	return 1
+}
+
+# Check if the file expected to be empty is indeed empty, and barfs
+# otherwise.
+
+test_must_be_empty () {
+	test_path_is_file "$1" &&
+	if test -s "$1"
+	then
+		echo "'$1' is not empty, it contains:"
+		cat "$1"
+		return 1
+	fi
+}
+
+# Tests that its two parameters refer to the same revision, or if '!' is
+# provided first, that its other two parameters refer to different
+# revisions.
+test_cmp_rev () {
+	local op='=' wrong_result=different
+
+	if test $# -ge 1 && test "x$1" = 'x!'
+	then
+	    op='!='
+	    wrong_result='the same'
+	    shift
+	fi
+	if test $# != 2
+	then
+		error "bug in the test script: test_cmp_rev requires two revisions, but got $#"
+	else
+		local r1 r2
+		r1=$(git rev-parse --verify "$1") &&
+		r2=$(git rev-parse --verify "$2") || return 1
+
+		if ! test "$r1" "$op" "$r2"
+		then
+			cat >&4 <<-EOF
+			error: two revisions point to $wrong_result objects:
+			  '$1': $r1
+			  '$2': $r2
+			EOF
+			return 1
+		fi
+	fi
+}
+
+# Compare paths respecting core.ignoreCase
+test_cmp_fspath () {
+	if test "x$1" = "x$2"
+	then
+		return 0
+	fi
+
+	if test true != "$(git config --get --type=bool core.ignorecase)"
+	then
+		return 1
+	fi
+
+	test "x$(echo "$1" | tr A-Z a-z)" =  "x$(echo "$2" | tr A-Z a-z)"
+}
+
+# Print a sequence of integers in increasing order, either with
+# two arguments (start and end):
+#
+#     test_seq 1 5 -- outputs 1 2 3 4 5 one line at a time
+#
+# or with one argument (end), in which case it starts counting
+# from 1.
+
+test_seq () {
+	case $# in
+	1)	set 1 "$@" ;;
+	2)	;;
+	*)	BUG "not 1 or 2 parameters to test_seq" ;;
+	esac
+	test_seq_counter__=$1
+	while test "$test_seq_counter__" -le "$2"
+	do
+		echo "$test_seq_counter__"
+		test_seq_counter__=$(( $test_seq_counter__ + 1 ))
+	done
+}
+
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test to restore sanity:
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		test_when_finished "git config --unset core.capslock" &&
+#		hello world
+#	'
+#
+# That would be roughly equivalent to
+#
+#	test_expect_success 'test core.capslock' '
+#		git config core.capslock true &&
+#		hello world
+#		git config --unset core.capslock
+#	'
+#
+# except that the greeting and config --unset must both succeed for
+# the test to pass.
+#
+# Note that under --immediate mode, no clean-up is done to help diagnose
+# what went wrong.
+
+test_when_finished () {
+	# We cannot detect when we are in a subshell in general, but by
+	# doing so on Bash is better than nothing (the test will
+	# silently pass on other shells).
+	test "${BASH_SUBSHELL-0}" = 0 ||
+	BUG "test_when_finished does nothing in a subshell"
+	test_cleanup="{ $*
+		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
+}
+
+# This function can be used to schedule some commands to be run
+# unconditionally at the end of the test script, e.g. to stop a daemon:
+#
+#	test_expect_success 'test git daemon' '
+#		git daemon &
+#		daemon_pid=$! &&
+#		test_atexit 'kill $daemon_pid' &&
+#		hello world
+#	'
+#
+# The commands will be executed before the trash directory is removed,
+# i.e. the atexit commands will still be able to access any pidfiles or
+# socket files.
+#
+# Note that these commands will be run even when a test script run
+# with '--immediate' fails.  Be careful with your atexit commands to
+# minimize any changes to the failed state.
+
+test_atexit () {
+	# We cannot detect when we are in a subshell in general, but by
+	# doing so on Bash is better than nothing (the test will
+	# silently pass on other shells).
+	test "${BASH_SUBSHELL-0}" = 0 ||
+	error "bug in test script: test_atexit does nothing in a subshell"
+	test_atexit_cleanup="{ $*
+		} && (exit \"\$eval_ret\"); eval_ret=\$?; $test_atexit_cleanup"
+}
+
+# Most tests can use the created repository, but some may need to create more.
+# Usage: test_create_repo <directory>
+test_create_repo () {
+	test "$#" = 1 ||
+	BUG "not 1 parameter to test-create-repo"
+	repo="$1"
+	mkdir -p "$repo"
+	(
+		cd "$repo" || error "Cannot setup test environment"
+		"${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" init \
+			"--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
+		error "cannot run git init -- have you built things yet?"
+		mv .git/hooks .git/hooks-disabled
+	) || exit
+}
+
+# This function helps on symlink challenged file systems when it is not
+# important that the file system entry is a symbolic link.
+# Use test_ln_s_add instead of "ln -s x y && git add y" to add a
+# symbolic link entry y to the index.
+
+test_ln_s_add () {
+	if test_have_prereq SYMLINKS
+	then
+		ln -s "$1" "$2" &&
+		git update-index --add "$2"
+	else
+		printf '%s' "$1" >"$2" &&
+		ln_s_obj=$(git hash-object -w "$2") &&
+		git update-index --add --cacheinfo 120000 $ln_s_obj "$2" &&
+		# pick up stat info from the file
+		git update-index "$2"
+	fi
+}
+
+# This function writes out its parameters, one per line
+test_write_lines () {
+	printf "%s\n" "$@"
+}
+
+perl () {
+	command "$PERL_PATH" "$@" 2>&7
+} 7>&2 2>&4
+
+# Given the name of an environment variable with a bool value, normalize
+# its value to a 0 (true) or 1 (false or empty string) return code.
+#
+#   test_bool_env GIT_TEST_HTTPD <default-value>
+#
+# Return with code corresponding to the given default value if the variable
+# is unset.
+# Abort the test script if either the value of the variable or the default
+# are not valid bool values.
+
+test_bool_env () {
+	if test $# != 2
+	then
+		BUG "test_bool_env requires two parameters (variable name and default value)"
+	fi
+
+	git env--helper --type=bool --default="$2" --exit-code "$1"
+	ret=$?
+	case $ret in
+	0|1)	# unset or valid bool value
+		;;
+	*)	# invalid bool value or something unexpected
+		error >&7 "test_bool_env requires bool values both for \$$1 and for the default fallback"
+		;;
+	esac
+	return $ret
+}
+
+# Exit the test suite, either by skipping all remaining tests or by
+# exiting with an error. If our prerequisite variable $1 falls back
+# on a default assume we were opportunistically trying to set up some
+# tests and we skip. If it is explicitly "true", then we report a failure.
+#
+# The error/skip message should be given by $2.
+#
+test_skip_or_die () {
+	if ! test_bool_env "$1" false
+	then
+		skip_all=$2
+		test_done
+	fi
+	error "$2"
+}
+
+# The following mingw_* functions obey POSIX shell syntax, but are actually
+# bash scripts, and are meant to be used only with bash on Windows.
+
+# A test_cmp function that treats LF and CRLF equal and avoids to fork
+# diff when possible.
+mingw_test_cmp () {
+	# Read text into shell variables and compare them. If the results
+	# are different, use regular diff to report the difference.
+	local test_cmp_a= test_cmp_b=
+
+	# When text came from stdin (one argument is '-') we must feed it
+	# to diff.
+	local stdin_for_diff=
+
+	# Since it is difficult to detect the difference between an
+	# empty input file and a failure to read the files, we go straight
+	# to diff if one of the inputs is empty.
+	if test -s "$1" && test -s "$2"
+	then
+		# regular case: both files non-empty
+		mingw_read_file_strip_cr_ test_cmp_a <"$1"
+		mingw_read_file_strip_cr_ test_cmp_b <"$2"
+	elif test -s "$1" && test "$2" = -
+	then
+		# read 2nd file from stdin
+		mingw_read_file_strip_cr_ test_cmp_a <"$1"
+		mingw_read_file_strip_cr_ test_cmp_b
+		stdin_for_diff='<<<"$test_cmp_b"'
+	elif test "$1" = - && test -s "$2"
+	then
+		# read 1st file from stdin
+		mingw_read_file_strip_cr_ test_cmp_a
+		mingw_read_file_strip_cr_ test_cmp_b <"$2"
+		stdin_for_diff='<<<"$test_cmp_a"'
+	fi
+	test -n "$test_cmp_a" &&
+	test -n "$test_cmp_b" &&
+	test "$test_cmp_a" = "$test_cmp_b" ||
+	eval "diff -u \"\$@\" $stdin_for_diff"
+}
+
+# $1 is the name of the shell variable to fill in
+mingw_read_file_strip_cr_ () {
+	# Read line-wise using LF as the line separator
+	# and use IFS to strip CR.
+	local line
+	while :
+	do
+		if IFS=$'\r' read -r -d $'\n' line
+		then
+			# good
+			line=$line$'\n'
+		else
+			# we get here at EOF, but also if the last line
+			# was not terminated by LF; in the latter case,
+			# some text was read
+			if test -z "$line"
+			then
+				# EOF, really
+				break
+			fi
+		fi
+		eval "$1=\$$1\$line"
+	done
+}
+
+# Like "env FOO=BAR some-program", but run inside a subshell, which means
+# it also works for shell functions (though those functions cannot impact
+# the environment outside of the test_env invocation).
+test_env () {
+	(
+		while test $# -gt 0
+		do
+			case "$1" in
+			*=*)
+				eval "${1%%=*}=\${1#*=}"
+				eval "export ${1%%=*}"
+				shift
+				;;
+			*)
+				"$@" 2>&7
+				exit
+				;;
+			esac
+		done
+	)
+} 7>&2 2>&4
+
+# Returns true if the numeric exit code in "$2" represents the expected signal
+# in "$1". Signals should be given numerically.
+test_match_signal () {
+	if test "$2" = "$((128 + $1))"
+	then
+		# POSIX
+		return 0
+	elif test "$2" = "$((256 + $1))"
+	then
+		# ksh
+		return 0
+	fi
+	return 1
+}
+
+# Read up to "$1" bytes (or to EOF) from stdin and write them to stdout.
+test_copy_bytes () {
+	perl -e '
+		my $len = $ARGV[1];
+		while ($len > 0) {
+			my $s;
+			my $nread = sysread(STDIN, $s, $len);
+			die "cannot read: $!" unless defined($nread);
+			last unless $nread;
+			print $s;
+			$len -= $nread;
+		}
+	' - "$1"
+}
+
+# run "$@" inside a non-git directory
+nongit () {
+	test -d non-repo ||
+	mkdir non-repo ||
+	return 1
+
+	(
+		GIT_CEILING_DIRECTORIES=$(pwd) &&
+		export GIT_CEILING_DIRECTORIES &&
+		cd non-repo &&
+		"$@" 2>&7
+	)
+} 7>&2 2>&4
+
+# convert stdin to pktline representation; note that empty input becomes an
+# empty packet, not a flush packet (for that you can just print 0000 yourself).
+packetize() {
+	cat >packetize.tmp &&
+	len=$(wc -c <packetize.tmp) &&
+	printf '%04x%s' "$(($len + 4))" &&
+	cat packetize.tmp &&
+	rm -f packetize.tmp
+}
+
+# Parse the input as a series of pktlines, writing the result to stdout.
+# Sideband markers are removed automatically, and the output is routed to
+# stderr if appropriate.
+#
+# NUL bytes are converted to "\\0" for ease of parsing with text tools.
+depacketize () {
+	perl -e '
+		while (read(STDIN, $len, 4) == 4) {
+			if ($len eq "0000") {
+				print "FLUSH\n";
+			} else {
+				read(STDIN, $buf, hex($len) - 4);
+				$buf =~ s/\0/\\0/g;
+				if ($buf =~ s/^[\x2\x3]//) {
+					print STDERR $buf;
+				} else {
+					$buf =~ s/^\x1//;
+					print $buf;
+				}
+			}
+		}
+	'
+}
+
+# Converts base-16 data into base-8. The output is given as a sequence of
+# escaped octals, suitable for consumption by 'printf'.
+hex2oct () {
+	perl -ne 'printf "\\%03o", hex for /../g'
+}
+
+# Set the hash algorithm in use to $1.  Only useful when testing the testsuite.
+test_set_hash () {
+	test_hash_algo="$1"
+}
+
+# Detect the hash algorithm in use.
+test_detect_hash () {
+	# Currently we only support SHA-1, but in the future this function will
+	# actually detect the algorithm in use.
+	test_hash_algo='sha1'
+}
+
+# Load common hash metadata and common placeholder object IDs for use with
+# test_oid.
+test_oid_init () {
+	test -n "$test_hash_algo" || test_detect_hash &&
+	test_oid_cache <"$TEST_DIRECTORY/oid-info/hash-info" &&
+	test_oid_cache <"$TEST_DIRECTORY/oid-info/oid"
+}
+
+# Load key-value pairs from stdin suitable for use with test_oid.  Blank lines
+# and lines starting with "#" are ignored.  Keys must be shell identifier
+# characters.
+#
+# Examples:
+# rawsz sha1:20
+# rawsz sha256:32
+test_oid_cache () {
+	local tag rest k v &&
+
+	{ test -n "$test_hash_algo" || test_detect_hash; } &&
+	while read tag rest
+	do
+		case $tag in
+		\#*)
+			continue;;
+		?*)
+			# non-empty
+			;;
+		*)
+			# blank line
+			continue;;
+		esac &&
+
+		k="${rest%:*}" &&
+		v="${rest#*:}" &&
+
+		if ! expr "$k" : '[a-z0-9][a-z0-9]*$' >/dev/null
+		then
+			BUG 'bad hash algorithm'
+		fi &&
+		eval "test_oid_${k}_$tag=\"\$v\""
+	done
+}
+
+# Look up a per-hash value based on a key ($1).  The value must have been loaded
+# by test_oid_init or test_oid_cache.
+test_oid () {
+	local var="test_oid_${test_hash_algo}_$1" &&
+
+	# If the variable is unset, we must be missing an entry for this
+	# key-hash pair, so exit with an error.
+	if eval "test -z \"\${$var+set}\""
+	then
+		BUG "undefined key '$1'"
+	fi &&
+	eval "printf '%s' \"\${$var}\""
+}
+
+# Insert a slash into an object ID so it can be used to reference a location
+# under ".git/objects".  For example, "deadbeef..." becomes "de/adbeef..".
+test_oid_to_path () {
+	local basename=${1#??}
+	echo "${1%$basename}/$basename"
+}
+
+# Choose a port number based on the test script's number and store it in
+# the given variable name, unless that variable already contains a number.
+test_set_port () {
+	local var=$1 port
+
+	if test $# -ne 1 || test -z "$var"
+	then
+		BUG "test_set_port requires a variable name"
+	fi
+
+	eval port=\$$var
+	case "$port" in
+	"")
+		# No port is set in the given env var, use the test
+		# number as port number instead.
+		# Remove not only the leading 't', but all leading zeros
+		# as well, so the arithmetic below won't (mis)interpret
+		# a test number like '0123' as an octal value.
+		port=${this_test#${this_test%%[1-9]*}}
+		if test "${port:-0}" -lt 1024
+		then
+			# root-only port, use a larger one instead.
+			port=$(($port + 10000))
+		fi
+		;;
+	*[!0-9]*|0*)
+		error >&7 "invalid port number: $port"
+		;;
+	*)
+		# The user has specified the port.
+		;;
+	esac
+
+	# Make sure that parallel '--stress' test jobs get different
+	# ports.
+	port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0}))
+	eval $var=$port
+}
+
+# Compare a file containing rev-list bitmap traversal output to its non-bitmap
+# counterpart. You can't just use test_cmp for this, because the two produce
+# subtly different output:
+#
+#   - regular output is in traversal order, whereas bitmap is split by type,
+#     with non-packed objects at the end
+#
+#   - regular output has a space and the pathname appended to non-commit
+#     objects; bitmap output omits this
+#
+# This function normalizes and compares the two. The second file should
+# always be the bitmap output.
+test_bitmap_traversal () {
+	if test "$1" = "--no-confirm-bitmaps"
+	then
+		shift
+	elif cmp "$1" "$2"
+	then
+		echo >&2 "identical raw outputs; are you sure bitmaps were used?"
+		return 1
+	fi &&
+	cut -d' ' -f1 "$1" | sort >"$1.normalized" &&
+	sort "$2" >"$2.normalized" &&
+	test_cmp "$1.normalized" "$2.normalized" &&
+	rm -f "$1.normalized" "$2.normalized"
+}