about summary refs log tree commit diff
path: root/third_party/git/t/t7400-submodule-basic.sh
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/t/t7400-submodule-basic.sh')
-rwxr-xr-xthird_party/git/t/t7400-submodule-basic.sh94
1 files changed, 75 insertions, 19 deletions
diff --git a/third_party/git/t/t7400-submodule-basic.sh b/third_party/git/t/t7400-submodule-basic.sh
index a208cb26e1df..fec7e0299dec 100755
--- a/third_party/git/t/t7400-submodule-basic.sh
+++ b/third_party/git/t/t7400-submodule-basic.sh
@@ -55,6 +55,21 @@ test_expect_success 'add aborts on repository with no commits' '
 	test_i18ncmp expect actual
 '
 
+test_expect_success 'status should ignore inner git repo when not added' '
+	rm -fr inner &&
+	mkdir inner &&
+	(
+		cd inner &&
+		git init &&
+		>t &&
+		git add t &&
+		git commit -m "initial"
+	) &&
+	test_must_fail git submodule status inner 2>output.err &&
+	rm -fr inner &&
+	test_i18ngrep "^error: .*did not match any file(s) known to git" output.err
+'
+
 test_expect_success 'setup - repository in init subdirectory' '
 	mkdir init &&
 	(
@@ -156,9 +171,11 @@ test_expect_success 'submodule add to .gitignored path fails' '
 	(
 		cd addtest-ignore &&
 		cat <<-\EOF >expect &&
-		The following path is ignored by one of your .gitignore files:
+		The following paths are ignored by one of your .gitignore files:
 		submod
-		Use -f if you really want to add it.
+		hint: Use -f if you really want to add them.
+		hint: Turn this message off by running
+		hint: "git config advice.addIgnoredFile false"
 		EOF
 		# Does not use test_commit due to the ignore
 		echo "*" > .gitignore &&
@@ -191,6 +208,17 @@ test_expect_success 'submodule add to reconfigure existing submodule with --forc
 	)
 '
 
+test_expect_success 'submodule add relays add --dry-run stderr' '
+	test_when_finished "rm -rf addtest/.git/index.lock" &&
+	(
+		cd addtest &&
+		: >.git/index.lock &&
+		! git submodule add "$submodurl" sub-while-locked 2>output.err &&
+		test_i18ngrep "^fatal: .*index\.lock" output.err &&
+		test_path_is_missing sub-while-locked
+	)
+'
+
 test_expect_success 'submodule add --branch' '
 	echo "refs/heads/initial" >expect-head &&
 	cat <<-\EOF >expect-heads &&
@@ -356,6 +384,28 @@ test_expect_success 'status should only print one line' '
 	test_line_count = 1 lines
 '
 
+test_expect_success 'status from subdirectory should have the same SHA1' '
+	test_when_finished "rmdir addtest/subdir" &&
+	(
+		cd addtest &&
+		mkdir subdir &&
+		git submodule status >output &&
+		awk "{print \$1}" <output >expect &&
+		cd subdir &&
+		git submodule status >../output &&
+		awk "{print \$1}" <../output >../actual &&
+		test_cmp ../expect ../actual &&
+		git -C ../submod checkout HEAD^ &&
+		git submodule status >../output &&
+		awk "{print \$1}" <../output >../actual2 &&
+		cd .. &&
+		git submodule status >output &&
+		awk "{print \$1}" <output >expect2 &&
+		test_cmp expect2 actual2 &&
+		! test_cmp actual actual2
+	)
+'
+
 test_expect_success 'setup - fetch commit name from submodule' '
 	rev1=$(cd .subrepo && git rev-parse HEAD) &&
 	printf "rev1: %s\n" "$rev1" &&
@@ -377,6 +427,14 @@ test_expect_success 'init should register submodule url in .git/config' '
 	test_cmp expect url
 '
 
+test_expect_success 'status should still be "missing" after initializing' '
+	rm -fr init &&
+	mkdir init &&
+	git submodule status >lines &&
+	rm -fr init &&
+	grep "^-$rev1" lines
+'
+
 test_failure_with_unknown_submodule () {
 	test_must_fail git submodule $1 no-such-submodule 2>output.err &&
 	test_i18ngrep "^error: .*no-such-submodule" output.err
@@ -527,7 +585,6 @@ test_expect_success 'update --init' '
 	test_must_fail git config submodule.example.url &&
 
 	git submodule update init 2> update.out &&
-	cat update.out &&
 	test_i18ngrep "not initialized" update.out &&
 	test_must_fail git rev-parse --resolve-git-dir init/.git &&
 
@@ -545,7 +602,6 @@ test_expect_success 'update --init from subdirectory' '
 	(
 		cd sub &&
 		git submodule update ../init 2>update.out &&
-		cat update.out &&
 		test_i18ngrep "not initialized" update.out &&
 		test_must_fail git rev-parse --resolve-git-dir ../init/.git &&
 
@@ -882,7 +938,7 @@ test_expect_success 'submodule add --name allows to replace a submodule with ano
 		echo "repo" >expect &&
 		test_must_fail git config -f .gitmodules submodule.repo.path &&
 		git config -f .gitmodules submodule.repo_new.path >actual &&
-		test_cmp expect actual&&
+		test_cmp expect actual &&
 		echo "$submodurl/repo" >expect &&
 		test_must_fail git config -f .gitmodules submodule.repo.url &&
 		echo "$submodurl/bare.git" >expect &&
@@ -954,7 +1010,7 @@ test_expect_success 'submodule add with an existing name fails unless forced' '
 		test -d repo &&
 		echo "repo" >expect &&
 		git config -f .gitmodules submodule.repo_new.path >actual &&
-		test_cmp expect actual&&
+		test_cmp expect actual &&
 		echo "$submodurl/repo.git" >expect &&
 		git config -f .gitmodules submodule.repo_new.url >actual &&
 		test_cmp expect actual &&
@@ -1175,7 +1231,7 @@ test_expect_success 'submodule helper list is not confused by common prefixes' '
 	git submodule add /dir1/b dir1/b &&
 	git submodule add /dir2/b dir2/b &&
 	git commit -m "first submodule commit" &&
-	git submodule--helper list dir1/b |cut -c51- >actual &&
+	git submodule--helper list dir1/b | cut -f 2 >actual &&
 	echo "dir1/b" >expect &&
 	test_cmp expect actual
 '
@@ -1204,7 +1260,7 @@ test_expect_success 'submodule update --init with a specification' '
 	pwd=$(pwd) &&
 	git clone file://"$pwd"/multisuper multisuper_clone &&
 	git -C multisuper_clone submodule update --init . ":(exclude)sub0" &&
-	git -C multisuper_clone submodule status |cut -c 1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect actual
 '
 
@@ -1215,7 +1271,7 @@ test_expect_success 'submodule update --init with submodule.active set' '
 	git -C multisuper_clone config submodule.active "." &&
 	git -C multisuper_clone config --add submodule.active ":(exclude)sub0" &&
 	git -C multisuper_clone submodule update --init &&
-	git -C multisuper_clone submodule status |cut -c 1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect actual
 '
 
@@ -1234,7 +1290,7 @@ test_expect_success 'submodule update and setting submodule.<name>.active' '
 	-sub3
 	EOF
 	git -C multisuper_clone submodule update &&
-	git -C multisuper_clone submodule status |cut -c 1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect actual
 '
 
@@ -1251,12 +1307,12 @@ test_expect_success 'clone active submodule without submodule url set' '
 		git submodule update &&
 		git submodule status >actual_raw &&
 
-		cut -c 1,43- actual_raw >actual &&
+		cut -d" " -f3- actual_raw >actual &&
 		cat >expect <<-\EOF &&
-		 sub0 (test2)
-		 sub1 (test2)
-		 sub2 (test2)
-		 sub3 (test2)
+		sub0 (test2)
+		sub1 (test2)
+		sub2 (test2)
+		sub3 (test2)
 		EOF
 		test_cmp expect actual
 	)
@@ -1272,7 +1328,7 @@ test_expect_success 'clone --recurse-submodules with a pathspec works' '
 	EOF
 
 	git clone --recurse-submodules="sub0" multisuper multisuper_clone &&
-	git -C multisuper_clone submodule status |cut -c1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expected actual
 '
 
@@ -1289,7 +1345,7 @@ test_expect_success 'clone with multiple --recurse-submodules options' '
 		  --recurse-submodules=":(exclude)sub0" \
 		  --recurse-submodules=":(exclude)sub2" \
 		  multisuper multisuper_clone &&
-	git -C multisuper_clone submodule status |cut -c1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect actual
 '
 
@@ -1317,7 +1373,7 @@ test_expect_success 'clone and subsequent updates correctly auto-initialize subm
 		  --recurse-submodules=":(exclude)sub4" \
 		  multisuper multisuper_clone &&
 
-	git -C multisuper_clone submodule status |cut -c1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect actual &&
 
 	git -C multisuper submodule add ../sub1 sub4 &&
@@ -1326,7 +1382,7 @@ test_expect_success 'clone and subsequent updates correctly auto-initialize subm
 	# obtain the new superproject
 	git -C multisuper_clone pull &&
 	git -C multisuper_clone submodule update --init &&
-	git -C multisuper_clone submodule status |cut -c1,43- >actual &&
+	git -C multisuper_clone submodule status | sed "s/$OID_REGEX //" >actual &&
 	test_cmp expect2 actual
 '