diff options
Diffstat (limited to 'third_party/git/t/t5000-tar-tree.sh')
| -rwxr-xr-x | third_party/git/t/t5000-tar-tree.sh | 452 |
1 files changed, 0 insertions, 452 deletions
diff --git a/third_party/git/t/t5000-tar-tree.sh b/third_party/git/t/t5000-tar-tree.sh deleted file mode 100755 index 3ebb0d3b6520..000000000000 --- a/third_party/git/t/t5000-tar-tree.sh +++ /dev/null @@ -1,452 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2005 Rene Scharfe -# - -test_description='git archive and git get-tar-commit-id test - -This test covers the topics of file contents, commit date handling and -commit id embedding: - - The contents of the repository is compared to the extracted tar - archive. The repository contains simple text files, symlinks and a - binary file (/bin/sh). Only paths shorter than 99 characters are - used. - - git archive applies the commit date to every file in the archive it - creates. The test sets the commit date to a specific value and checks - if the tar archive contains that value. - - When giving git archive a commit id (in contrast to a tree id) it - embeds this commit id into the tar archive as a comment. The test - checks the ability of git get-tar-commit-id to figure it out from the - tar file. - -' - -. ./test-lib.sh - -SUBSTFORMAT=%H%n - -test_lazy_prereq TAR_NEEDS_PAX_FALLBACK ' - ( - mkdir pax && - cd pax && - "$TAR" xf "$TEST_DIRECTORY"/t5000/pax.tar && - test -f PaxHeaders.1791/file - ) -' - -test_lazy_prereq GZIP 'gzip --version' - -get_pax_header() { - file=$1 - header=$2= - - while read len rest - do - if test "$len" = $(echo "$len $rest" | wc -c) - then - case "$rest" in - $header*) - echo "${rest#$header}" - ;; - esac - fi - done <"$file" -} - -check_tar() { - tarfile=$1.tar - listfile=$1.lst - dir=$1 - dir_with_prefix=$dir/$2 - - test_expect_success ' extract tar archive' ' - (mkdir $dir && cd $dir && "$TAR" xf -) <$tarfile - ' - - test_expect_success TAR_NEEDS_PAX_FALLBACK ' interpret pax headers' ' - ( - cd $dir && - for header in *.paxheader - do - data=${header%.paxheader}.data && - if test -h $data || test -e $data - then - path=$(get_pax_header $header path) && - if test -n "$path" - then - mv "$data" "$path" - fi - fi - done - ) - ' - - test_expect_success ' validate filenames' ' - (cd ${dir_with_prefix}a && find .) | sort >$listfile && - test_cmp a.lst $listfile - ' - - test_expect_success ' validate file contents' ' - diff -r a ${dir_with_prefix}a - ' -} - -check_added() { - dir=$1 - path_in_fs=$2 - path_in_archive=$3 - - test_expect_success " validate extra file $path_in_archive" ' - diff -r $path_in_fs $dir/$path_in_archive - ' -} - -test_expect_success 'setup' ' - test_oid_cache <<-EOF - obj sha1:19f9c8273ec45a8938e6999cb59b3ff66739902a - obj sha256:3c666f798798601571f5cec0adb57ce4aba8546875e7693177e0535f34d2c49b - EOF -' - -test_expect_success \ - 'populate workdir' \ - 'mkdir a && - echo simple textfile >a/a && - ten=0123456789 && hundred=$ten$ten$ten$ten$ten$ten$ten$ten$ten$ten && - echo long filename >a/four$hundred && - mkdir a/bin && - test-tool genrandom "frotz" 500000 >a/bin/sh && - printf "A\$Format:%s\$O" "$SUBSTFORMAT" >a/substfile1 && - printf "A not substituted O" >a/substfile2 && - if test_have_prereq SYMLINKS; then - ln -s a a/l1 - else - printf %s a > a/l1 - fi && - (p=long_path_to_a_file && cd a && - for depth in 1 2 3 4 5; do mkdir $p && cd $p; done && - echo text >file_with_long_path) && - (cd a && find .) | sort >a.lst' - -test_expect_success \ - 'add ignored file' \ - 'echo ignore me >a/ignored && - echo ignored export-ignore >.git/info/attributes' - -test_expect_success 'add files to repository' ' - git add a && - GIT_COMMITTER_DATE="2005-05-27 22:00" git commit -m initial -' - -test_expect_success 'setup export-subst' ' - echo "substfile?" export-subst >>.git/info/attributes && - git log --max-count=1 "--pretty=format:A${SUBSTFORMAT}O" HEAD \ - >a/substfile1 -' - -test_expect_success \ - 'create bare clone' \ - 'git clone --bare . bare.git && - cp .git/info/attributes bare.git/info/attributes' - -test_expect_success \ - 'remove ignored file' \ - 'rm a/ignored' - -test_expect_success \ - 'git archive' \ - 'git archive HEAD >b.tar' - -check_tar b - -test_expect_success 'git archive --prefix=prefix/' ' - git archive --prefix=prefix/ HEAD >with_prefix.tar -' - -check_tar with_prefix prefix/ - -test_expect_success 'git-archive --prefix=olde-' ' - git archive --prefix=olde- HEAD >with_olde-prefix.tar -' - -check_tar with_olde-prefix olde- - -test_expect_success 'git archive --add-file' ' - echo untracked >untracked && - git archive --add-file=untracked HEAD >with_untracked.tar -' - -check_tar with_untracked -check_added with_untracked untracked untracked - -test_expect_success 'git archive --add-file twice' ' - echo untracked >untracked && - git archive --prefix=one/ --add-file=untracked \ - --prefix=two/ --add-file=untracked \ - --prefix= HEAD >with_untracked2.tar -' - -check_tar with_untracked2 -check_added with_untracked2 untracked one/untracked -check_added with_untracked2 untracked two/untracked - -test_expect_success 'git archive on large files' ' - test_config core.bigfilethreshold 1 && - git archive HEAD >b3.tar && - test_cmp_bin b.tar b3.tar -' - -test_expect_success \ - 'git archive in a bare repo' \ - '(cd bare.git && git archive HEAD) >b3.tar' - -test_expect_success \ - 'git archive vs. the same in a bare repo' \ - 'test_cmp_bin b.tar b3.tar' - -test_expect_success 'git archive with --output' \ - 'git archive --output=b4.tar HEAD && - test_cmp_bin b.tar b4.tar' - -test_expect_success 'git archive --remote' \ - 'git archive --remote=. HEAD >b5.tar && - test_cmp_bin b.tar b5.tar' - -test_expect_success 'git archive --remote with configured remote' ' - git config remote.foo.url . && - ( - cd a && - git archive --remote=foo --output=../b5-nick.tar HEAD - ) && - test_cmp_bin b.tar b5-nick.tar -' - -test_expect_success \ - 'validate file modification time' \ - 'mkdir extract && - "$TAR" xf b.tar -C extract a/a && - test-tool chmtime --get extract/a/a >b.mtime && - echo "1117231200" >expected.mtime && - test_cmp expected.mtime b.mtime' - -test_expect_success \ - 'git get-tar-commit-id' \ - 'git get-tar-commit-id <b.tar >b.commitid && - test_cmp .git/$(git symbolic-ref HEAD) b.commitid' - -test_expect_success 'git archive with --output, override inferred format' ' - git archive --format=tar --output=d4.zip HEAD && - test_cmp_bin b.tar d4.zip -' - -test_expect_success GZIP 'git archive with --output and --remote creates .tgz' ' - git archive --output=d5.tgz --remote=. HEAD && - gzip -d -c <d5.tgz >d5.tar && - test_cmp_bin b.tar d5.tar -' - -test_expect_success 'git archive --list outside of a git repo' ' - nongit git archive --list -' - -test_expect_success 'git archive --remote outside of a git repo' ' - git archive HEAD >expect.tar && - nongit git archive --remote="$PWD" HEAD >actual.tar && - test_cmp_bin expect.tar actual.tar -' - -test_expect_success 'clients cannot access unreachable commits' ' - test_commit unreachable && - sha1=$(git rev-parse HEAD) && - git reset --hard HEAD^ && - git archive $sha1 >remote.tar && - test_must_fail git archive --remote=. $sha1 >remote.tar -' - -test_expect_success 'upload-archive can allow unreachable commits' ' - test_commit unreachable1 && - sha1=$(git rev-parse HEAD) && - git reset --hard HEAD^ && - git archive $sha1 >remote.tar && - test_config uploadarchive.allowUnreachable true && - git archive --remote=. $sha1 >remote.tar -' - -test_expect_success 'setup tar filters' ' - git config tar.tar.foo.command "tr ab ba" && - git config tar.bar.command "tr ab ba" && - git config tar.bar.remote true && - git config tar.invalid baz -' - -test_expect_success 'archive --list mentions user filter' ' - git archive --list >output && - grep "^tar\.foo\$" output && - grep "^bar\$" output -' - -test_expect_success 'archive --list shows only enabled remote filters' ' - git archive --list --remote=. >output && - ! grep "^tar\.foo\$" output && - grep "^bar\$" output -' - -test_expect_success 'invoke tar filter by format' ' - git archive --format=tar.foo HEAD >config.tar.foo && - tr ab ba <config.tar.foo >config.tar && - test_cmp_bin b.tar config.tar && - git archive --format=bar HEAD >config.bar && - tr ab ba <config.bar >config.tar && - test_cmp_bin b.tar config.tar -' - -test_expect_success 'invoke tar filter by extension' ' - git archive -o config-implicit.tar.foo HEAD && - test_cmp_bin config.tar.foo config-implicit.tar.foo && - git archive -o config-implicit.bar HEAD && - test_cmp_bin config.tar.foo config-implicit.bar -' - -test_expect_success 'default output format remains tar' ' - git archive -o config-implicit.baz HEAD && - test_cmp_bin b.tar config-implicit.baz -' - -test_expect_success 'extension matching requires dot' ' - git archive -o config-implicittar.foo HEAD && - test_cmp_bin b.tar config-implicittar.foo -' - -test_expect_success 'only enabled filters are available remotely' ' - test_must_fail git archive --remote=. --format=tar.foo HEAD \ - >remote.tar.foo && - git archive --remote=. --format=bar >remote.bar HEAD && - test_cmp_bin remote.bar config.bar -' - -test_expect_success GZIP 'git archive --format=tgz' ' - git archive --format=tgz HEAD >j.tgz -' - -test_expect_success GZIP 'git archive --format=tar.gz' ' - git archive --format=tar.gz HEAD >j1.tar.gz && - test_cmp_bin j.tgz j1.tar.gz -' - -test_expect_success GZIP 'infer tgz from .tgz filename' ' - git archive --output=j2.tgz HEAD && - test_cmp_bin j.tgz j2.tgz -' - -test_expect_success GZIP 'infer tgz from .tar.gz filename' ' - git archive --output=j3.tar.gz HEAD && - test_cmp_bin j.tgz j3.tar.gz -' - -test_expect_success GZIP 'extract tgz file' ' - gzip -d -c <j.tgz >j.tar && - test_cmp_bin b.tar j.tar -' - -test_expect_success GZIP 'remote tar.gz is allowed by default' ' - git archive --remote=. --format=tar.gz HEAD >remote.tar.gz && - test_cmp_bin j.tgz remote.tar.gz -' - -test_expect_success GZIP 'remote tar.gz can be disabled' ' - git config tar.tar.gz.remote false && - test_must_fail git archive --remote=. --format=tar.gz HEAD \ - >remote.tar.gz -' - -test_expect_success 'archive and :(glob)' ' - git archive -v HEAD -- ":(glob)**/sh" >/dev/null 2>actual && - cat >expect <<EOF && -a/ -a/bin/ -a/bin/sh -EOF - test_cmp expect actual -' - -test_expect_success 'catch non-matching pathspec' ' - test_must_fail git archive -v HEAD -- "*.abc" >/dev/null -' - -# Pull the size and date of each entry in a tarfile using the system tar. -# -# We'll pull out only the year from the date; that avoids any question of -# timezones impacting the result (as long as we keep our test times away from a -# year boundary; our reference times are all in August). -# -# The output of tar_info is expected to be "<size> <year>", both in decimal. It -# ignores the return value of tar. We have to do this, because some of our test -# input is only partial (the real data is 64GB in some cases). -tar_info () { - "$TAR" tvf "$1" | - awk '{ - split($4, date, "-") - print $3 " " date[1] - }' -} - -# See if our system tar can handle a tar file with huge sizes and dates far in -# the future, and that we can actually parse its output. -# -# The reference file was generated by GNU tar, and the magic time and size are -# both octal 01000000000001, which overflows normal ustar fields. -test_lazy_prereq TAR_HUGE ' - echo "68719476737 4147" >expect && - tar_info "$TEST_DIRECTORY"/t5000/huge-and-future.tar >actual && - test_cmp expect actual -' - -test_expect_success LONG_IS_64BIT 'set up repository with huge blob' ' - obj=$(test_oid obj) && - path=$(test_oid_to_path $obj) && - mkdir -p .git/objects/$(dirname $path) && - cp "$TEST_DIRECTORY"/t5000/huge-object .git/objects/$path && - rm -f .git/index && - git update-index --add --cacheinfo 100644,$obj,huge && - git commit -m huge -' - -# We expect git to die with SIGPIPE here (otherwise we -# would generate the whole 64GB). -test_expect_success LONG_IS_64BIT 'generate tar with huge size' ' - { - git archive HEAD - echo $? >exit-code - } | test_copy_bytes 4096 >huge.tar && - echo 141 >expect && - test_cmp expect exit-code -' - -test_expect_success TAR_HUGE,LONG_IS_64BIT 'system tar can read our huge size' ' - echo 68719476737 >expect && - tar_info huge.tar | cut -d" " -f1 >actual && - test_cmp expect actual -' - -test_expect_success TIME_IS_64BIT 'set up repository with far-future commit' ' - rm -f .git/index && - echo content >file && - git add file && - GIT_COMMITTER_DATE="@68719476737 +0000" \ - git commit -m "tempori parendum" -' - -test_expect_success TIME_IS_64BIT 'generate tar with future mtime' ' - git archive HEAD >future.tar -' - -test_expect_success TAR_HUGE,TIME_IS_64BIT,TIME_T_IS_64BIT 'system tar can read our future mtime' ' - echo 4147 >expect && - tar_info future.tar | cut -d" " -f2 >actual && - test_cmp expect actual -' - -test_done |