diff options
Diffstat (limited to 'third_party/git/t/t3701-add-interactive.sh')
| -rwxr-xr-x | third_party/git/t/t3701-add-interactive.sh | 181 |
1 files changed, 172 insertions, 9 deletions
diff --git a/third_party/git/t/t3701-add-interactive.sh b/third_party/git/t/t3701-add-interactive.sh index 69991a3168..5bae6e50f1 100755 --- a/third_party/git/t/t3701-add-interactive.sh +++ b/third_party/git/t/t3701-add-interactive.sh @@ -23,6 +23,17 @@ diff_cmp () { test_cmp "$1.filtered" "$2.filtered" } +# This function uses a trick to manipulate the interactive add to use color: +# the `want_color()` function special-cases the situation where a pager was +# spawned and Git now wants to output colored text: to detect that situation, +# the environment variable `GIT_PAGER_IN_USE` is set. However, color is +# suppressed despite that environment variable if the `TERM` variable +# indicates a dumb terminal, so we set that variable, too. + +force_color () { + env GIT_PAGER_IN_USE=true TERM=vt100 "$@" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -57,6 +68,15 @@ test_expect_success 'revert works (initial)' ' ! grep . output ' +test_expect_success 'add untracked (multiple)' ' + test_when_finished "git reset && rm [1-9]" && + touch $(test_seq 9) && + test_write_lines a "2-5 8-" | git add -i -- [1-9] && + test_write_lines 2 3 4 5 8 9 >expected && + git ls-files [1-9] >output && + test_cmp expected output +' + test_expect_success 'setup (commit)' ' echo baseline >file && git add file && @@ -94,7 +114,6 @@ test_expect_success 'revert works (commit)' ' grep "unchanged *+3/-0 file" output ' - test_expect_success 'setup expected' ' cat >expected <<-\EOF EOF @@ -263,6 +282,35 @@ test_expect_success FILEMODE 'stage mode and hunk' ' # end of tests disabled when filemode is not usable +test_expect_success 'different prompts for mode change/deleted' ' + git reset --hard && + >file && + >deleted && + git add --chmod=+x file deleted && + echo changed >file && + rm deleted && + test_write_lines n n n | + git -c core.filemode=true add -p >actual && + sed -n "s/^\(([0-9/]*) Stage .*?\).*/\1/p" actual >actual.filtered && + cat >expect <<-\EOF && + (1/1) Stage deletion [y,n,q,a,d,?]? + (1/2) Stage mode change [y,n,q,a,d,j,J,g,/,?]? + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? + EOF + test_cmp expect actual.filtered +' + +test_expect_success 'correct message when there is nothing to do' ' + git reset --hard && + git add -p 2>err && + test_i18ngrep "No changes" err && + printf "\\0123" >binary && + git add binary && + printf "\\0abc" >binary && + git add -p 2>err && + test_i18ngrep "Only binary files changed" err +' + test_expect_success 'setup again' ' git reset --hard && test_chmod +x file && @@ -314,7 +362,7 @@ test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && printf "%s\n" s y y | git add -p file 2>error | - sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + sed -n -e "s/^([1-2]\/[1-2]) Stage this hunk[^@]*\(@@ .*\)/\1/" \ -e "/^[-+@ \\\\]"/p >output && test_must_be_empty error && git diff --cached >diff && @@ -374,6 +422,36 @@ test_expect_success 'split hunk setup' ' test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' +test_expect_success 'goto hunk' ' + test_when_finished "git reset" && + tr _ " " >expect <<-EOF && + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? + 1: -1,2 +1,3 +15 + _ 2: -2,4 +3,8 +21 + go to which hunk? @@ -1,2 +1,3 @@ + _10 + +15 + _20 + (1/2) Stage this hunk [y,n,q,a,d,j,J,g,/,e,?]?_ + EOF + test_write_lines s y g 1 | git add -p >actual && + tail -n 7 <actual >actual.trimmed && + test_cmp expect actual.trimmed +' + +test_expect_success 'navigate to hunk via regex' ' + test_when_finished "git reset" && + tr _ " " >expect <<-EOF && + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? @@ -1,2 +1,3 @@ + _10 + +15 + _20 + (1/2) Stage this hunk [y,n,q,a,d,j,J,g,/,e,?]?_ + EOF + test_write_lines s y /1,2 | git add -p >actual && + tail -n 5 <actual >actual.trimmed && + test_cmp expect actual.trimmed +' + test_expect_success 'split hunk "add -p (edit)"' ' # Split, say Edit and do nothing. Then: # @@ -403,6 +481,40 @@ test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' ! grep "^+31" actual ' +test_expect_success 'split hunk with incomplete line at end' ' + git reset --hard && + printf "missing LF" >>test && + git add test && + test_write_lines before 10 20 30 40 50 60 70 >test && + git grep --cached missing && + test_write_lines s n y q | git add -p && + test_must_fail git grep --cached missing && + git grep before && + test_must_fail git grep --cached before +' + +test_expect_failure 'edit, adding lines to the first hunk' ' + test_write_lines 10 11 20 30 40 50 51 60 >test && + git reset && + tr _ " " >patch <<-EOF && + @@ -1,5 +1,6 @@ + _10 + +11 + +12 + _20 + +21 + +22 + _30 + EOF + # test sequence is s(plit), e(dit), n(o) + # q n q q is there to make sure we exit at the end. + printf "%s\n" s e n q n q q | + EDITOR=./fake_editor.sh git add -p 2>error && + test_must_be_empty error && + git diff --cached >actual && + grep "^+22" actual +' + test_expect_success 'patch mode ignores unmerged entries' ' git reset --hard && test_commit conflict && @@ -429,35 +541,61 @@ test_expect_success 'patch mode ignores unmerged entries' ' diff_cmp expected diff ' -test_expect_success TTY 'diffs can be colorized' ' +test_expect_success 'diffs can be colorized' ' git reset --hard && echo content >test && - printf y | test_terminal git add -p >output 2>&1 && + printf y >y && + force_color git add -p >output 2>&1 <y && # We do not want to depend on the exact coloring scheme # git uses for diffs, so just check that we saw some kind of color. grep "$(printf "\\033")" output ' -test_expect_success TTY 'diffFilter filters diff' ' +test_expect_success 'colorized diffs respect diff.wsErrorHighlight' ' + git reset --hard && + + echo "old " >test && + git add test && + echo "new " >test && + + printf y >y && + force_color git -c diff.wsErrorHighlight=all add -p >output.raw 2>&1 <y && + test_decode_color <output.raw >output && + grep "old<" output +' + +test_expect_success 'diffFilter filters diff' ' git reset --hard && echo content >test && test_config interactive.diffFilter "sed s/^/foo:/" && - printf y | test_terminal git add -p >output 2>&1 && + printf y >y && + force_color git add -p >output 2>&1 <y && # avoid depending on the exact coloring or content of the prompts, # and just make sure we saw our diff prefixed grep foo:.*content output ' -test_expect_success TTY 'detect bogus diffFilter output' ' +test_expect_success 'detect bogus diffFilter output' ' git reset --hard && echo content >test && - test_config interactive.diffFilter "echo too-short" && - printf y | test_must_fail test_terminal git add -p + test_config interactive.diffFilter "sed 1d" && + printf y >y && + test_must_fail force_color git add -p <y +' + +test_expect_success 'diff.algorithm is passed to `git diff-files`' ' + git reset --hard && + + >file && + git add file && + echo changed >file && + test_must_fail git -c diff.algorithm=bogus add -p 2>err && + test_i18ngrep "error: option diff-algorithm accepts " err ' test_expect_success 'patch-mode via -i prompts for files' ' @@ -647,4 +785,29 @@ test_expect_success 'checkout -p works with pathological context lines' ' test_write_lines a b a b a a b a b a >expect && test_cmp expect a ' + +test_expect_success 'show help from add--helper' ' + git reset --hard && + cat >expect <<-EOF && + + <BOLD>*** Commands ***<RESET> + 1: <BOLD;BLUE>s<RESET>tatus 2: <BOLD;BLUE>u<RESET>pdate 3: <BOLD;BLUE>r<RESET>evert 4: <BOLD;BLUE>a<RESET>dd untracked + 5: <BOLD;BLUE>p<RESET>atch 6: <BOLD;BLUE>d<RESET>iff 7: <BOLD;BLUE>q<RESET>uit 8: <BOLD;BLUE>h<RESET>elp + <BOLD;BLUE>What now<RESET>> <BOLD;RED>status - show paths with changes<RESET> + <BOLD;RED>update - add working tree state to the staged set of changes<RESET> + <BOLD;RED>revert - revert staged set of changes back to the HEAD version<RESET> + <BOLD;RED>patch - pick hunks and update selectively<RESET> + <BOLD;RED>diff - view diff between HEAD and index<RESET> + <BOLD;RED>add untracked - add contents of untracked files to the staged set of changes<RESET> + <BOLD>*** Commands ***<RESET> + 1: <BOLD;BLUE>s<RESET>tatus 2: <BOLD;BLUE>u<RESET>pdate 3: <BOLD;BLUE>r<RESET>evert 4: <BOLD;BLUE>a<RESET>dd untracked + 5: <BOLD;BLUE>p<RESET>atch 6: <BOLD;BLUE>d<RESET>iff 7: <BOLD;BLUE>q<RESET>uit 8: <BOLD;BLUE>h<RESET>elp + <BOLD;BLUE>What now<RESET>>$SP + Bye. + EOF + test_write_lines h | force_color git add -i >actual.colored && + test_decode_color <actual.colored >actual && + test_i18ncmp expect actual +' + test_done |