diff options
Diffstat (limited to 'third_party/git/git-bisect.sh')
| -rwxr-xr-x | third_party/git/git-bisect.sh | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/third_party/git/git-bisect.sh b/third_party/git/git-bisect.sh new file mode 100755 index 000000000000..efee12b8b1e6 --- /dev/null +++ b/third_party/git/git-bisect.sh @@ -0,0 +1,348 @@ +#!/bin/sh + +USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|view|replay|log|run]' +LONG_USAGE='git bisect help + print this long help message. +git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>] + [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...] + reset bisect state and start bisection. +git bisect (bad|new) [<rev>] + mark <rev> a known-bad revision/ + a revision after change in a given property. +git bisect (good|old) [<rev>...] + mark <rev>... known-good revisions/ + revisions before change in a given property. +git bisect terms [--term-good | --term-bad] + show the terms used for old and new commits (default: bad, good) +git bisect skip [(<rev>|<range>)...] + mark <rev>... untestable revisions. +git bisect next + find next bisection to test and check it out. +git bisect reset [<commit>] + finish bisection search and go back to commit. +git bisect (visualize|view) + show bisect status in gitk. +git bisect replay <logfile> + replay bisection log. +git bisect log + show bisect log. +git bisect run <cmd>... + use <cmd>... to automatically bisect. + +Please use "git help bisect" to get the full man page.' + +OPTIONS_SPEC= +. git-sh-setup + +_x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' +_x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40" +TERM_BAD=bad +TERM_GOOD=good + +bisect_head() +{ + if test -f "$GIT_DIR/BISECT_HEAD" + then + echo BISECT_HEAD + else + echo HEAD + fi +} + +bisect_autostart() { + test -s "$GIT_DIR/BISECT_START" || { + gettextln "You need to start by \"git bisect start\"" >&2 + if test -t 0 + then + # TRANSLATORS: Make sure to include [Y] and [n] in your + # translation. The program will only accept English input + # at this point. + gettext "Do you want me to do it for you [Y/n]? " >&2 + read yesno + case "$yesno" in + [Nn]*) + exit ;; + esac + bisect_start + else + exit 1 + fi + } +} + +bisect_start() { + git bisect--helper --bisect-start $@ || exit + + # + # Change state. + # In case of mistaken revs or checkout error, or signals received, + # "bisect_auto_next" below may exit or misbehave. + # We have to trap this to be able to clean up using + # "bisect_clean_state". + # + trap 'git bisect--helper --bisect-clean-state' 0 + trap 'exit 255' 1 2 3 15 + + # + # Check if we can proceed to the next bisect state. + # + get_terms + bisect_auto_next + + trap '-' 0 +} + +bisect_skip() { + all='' + for arg in "$@" + do + case "$arg" in + *..*) + revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;; + *) + revs=$(git rev-parse --sq-quote "$arg") ;; + esac + all="$all $revs" + done + eval bisect_state 'skip' $all +} + +bisect_state() { + bisect_autostart + state=$1 + git bisect--helper --check-and-set-terms $state $TERM_GOOD $TERM_BAD || exit + get_terms + case "$#,$state" in + 0,*) + die "Please call 'bisect_state' with at least one argument." ;; + 1,"$TERM_BAD"|1,"$TERM_GOOD"|1,skip) + bisected_head=$(bisect_head) + rev=$(git rev-parse --verify "$bisected_head") || + die "$(eval_gettext "Bad rev input: \$bisected_head")" + git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit + git bisect--helper --check-expected-revs "$rev" ;; + 2,"$TERM_BAD"|*,"$TERM_GOOD"|*,skip) + shift + hash_list='' + for rev in "$@" + do + sha=$(git rev-parse --verify "$rev^{commit}") || + die "$(eval_gettext "Bad rev input: \$rev")" + hash_list="$hash_list $sha" + done + for rev in $hash_list + do + git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit + done + git bisect--helper --check-expected-revs $hash_list ;; + *,"$TERM_BAD") + die "$(eval_gettext "'git bisect \$TERM_BAD' can take only one argument.")" ;; + *) + usage ;; + esac + bisect_auto_next +} + +bisect_auto_next() { + git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD && bisect_next || : +} + +bisect_next() { + case "$#" in 0) ;; *) usage ;; esac + bisect_autostart + git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD $TERM_GOOD|| exit + + # Perform all bisection computation, display and checkout + git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout) + res=$? + + # Check if we should exit because bisection is finished + if test $res -eq 10 + then + bad_rev=$(git show-ref --hash --verify refs/bisect/$TERM_BAD) + bad_commit=$(git show-branch $bad_rev) + echo "# first $TERM_BAD commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG" + exit 0 + elif test $res -eq 2 + then + echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG" + good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/$TERM_GOOD-*") + for skipped in $(git rev-list refs/bisect/$TERM_BAD --not $good_revs) + do + skipped_commit=$(git show-branch $skipped) + echo "# possible first $TERM_BAD commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG" + done + exit $res + fi + + # Check for an error in the bisection process + test $res -ne 0 && exit $res + + return 0 +} + +bisect_visualize() { + git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit + + if test $# = 0 + then + if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" && + type gitk >/dev/null 2>&1 + then + set gitk + else + set git log + fi + else + case "$1" in + git*|tig) ;; + -*) set git log "$@" ;; + *) set git "$@" ;; + esac + fi + + eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES") +} + +bisect_replay () { + file="$1" + test "$#" -eq 1 || die "$(gettext "No logfile given")" + test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")" + git bisect--helper --bisect-reset || exit + while read git bisect command rev + do + test "$git $bisect" = "git bisect" || test "$git" = "git-bisect" || continue + if test "$git" = "git-bisect" + then + rev="$command" + command="$bisect" + fi + get_terms + git bisect--helper --check-and-set-terms "$command" "$TERM_GOOD" "$TERM_BAD" || exit + get_terms + case "$command" in + start) + cmd="bisect_start $rev" + eval "$cmd" ;; + "$TERM_GOOD"|"$TERM_BAD"|skip) + git bisect--helper --bisect-write "$command" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit;; + terms) + git bisect--helper --bisect-terms $rev || exit;; + *) + die "$(gettext "?? what are you talking about?")" ;; + esac + done <"$file" + bisect_auto_next +} + +bisect_run () { + git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit + + test -n "$*" || die "$(gettext "bisect run failed: no command provided.")" + + while true + do + command="$@" + eval_gettextln "running \$command" + "$@" + res=$? + + # Check for really bad run error. + if [ $res -lt 0 -o $res -ge 128 ] + then + eval_gettextln "bisect run failed: +exit code \$res from '\$command' is < 0 or >= 128" >&2 + exit $res + fi + + # Find current state depending on run success or failure. + # A special exit code of 125 means cannot test. + if [ $res -eq 125 ] + then + state='skip' + elif [ $res -gt 0 ] + then + state="$TERM_BAD" + else + state="$TERM_GOOD" + fi + + # We have to use a subshell because "bisect_state" can exit. + ( bisect_state $state >"$GIT_DIR/BISECT_RUN" ) + res=$? + + cat "$GIT_DIR/BISECT_RUN" + + if sane_grep "first $TERM_BAD commit could be any of" "$GIT_DIR/BISECT_RUN" \ + >/dev/null + then + gettextln "bisect run cannot continue any more" >&2 + exit $res + fi + + if [ $res -ne 0 ] + then + eval_gettextln "bisect run failed: +'bisect_state \$state' exited with error code \$res" >&2 + exit $res + fi + + if sane_grep "is the first $TERM_BAD commit" "$GIT_DIR/BISECT_RUN" >/dev/null + then + gettextln "bisect run success" + exit 0; + fi + + done +} + +bisect_log () { + test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")" + cat "$GIT_DIR/BISECT_LOG" +} + +get_terms () { + if test -s "$GIT_DIR/BISECT_TERMS" + then + { + read TERM_BAD + read TERM_GOOD + } <"$GIT_DIR/BISECT_TERMS" + fi +} + +case "$#" in +0) + usage ;; +*) + cmd="$1" + get_terms + shift + case "$cmd" in + help) + git bisect -h ;; + start) + bisect_start "$@" ;; + bad|good|new|old|"$TERM_BAD"|"$TERM_GOOD") + bisect_state "$cmd" "$@" ;; + skip) + bisect_skip "$@" ;; + next) + # Not sure we want "next" at the UI level anymore. + bisect_next "$@" ;; + visualize|view) + bisect_visualize "$@" ;; + reset) + git bisect--helper --bisect-reset "$@" ;; + replay) + bisect_replay "$@" ;; + log) + bisect_log ;; + run) + bisect_run "$@" ;; + terms) + git bisect--helper --bisect-terms "$@" || exit;; + *) + usage ;; + esac +esac |