diff options
Diffstat (limited to 'third_party/git/block-sha1')
-rw-r--r-- | third_party/git/block-sha1/sha1.c | 251 | ||||
-rw-r--r-- | third_party/git/block-sha1/sha1.h | 22 |
2 files changed, 0 insertions, 273 deletions
diff --git a/third_party/git/block-sha1/sha1.c b/third_party/git/block-sha1/sha1.c deleted file mode 100644 index 22b125cf8c12..000000000000 --- a/third_party/git/block-sha1/sha1.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * SHA1 routine optimized to do word accesses rather than byte accesses, - * and to avoid unnecessary copies into the context array. - * - * This was initially based on the Mozilla SHA1 implementation, although - * none of the original Mozilla code remains. - */ - -/* this is only to get definitions for memcpy(), ntohl() and htonl() */ -#include "../git-compat-util.h" - -#include "sha1.h" - -#if defined(__GNUC__) && (defined(__i386__) || defined(__x86_64__)) - -/* - * Force usage of rol or ror by selecting the one with the smaller constant. - * It _can_ generate slightly smaller code (a constant of 1 is special), but - * perhaps more importantly it's possibly faster on any uarch that does a - * rotate with a loop. - */ - -#define SHA_ASM(op, x, n) ({ unsigned int __res; __asm__(op " %1,%0":"=r" (__res):"i" (n), "0" (x)); __res; }) -#define SHA_ROL(x,n) SHA_ASM("rol", x, n) -#define SHA_ROR(x,n) SHA_ASM("ror", x, n) - -#else - -#define SHA_ROT(X,l,r) (((X) << (l)) | ((X) >> (r))) -#define SHA_ROL(X,n) SHA_ROT(X,n,32-(n)) -#define SHA_ROR(X,n) SHA_ROT(X,32-(n),n) - -#endif - -/* - * If you have 32 registers or more, the compiler can (and should) - * try to change the array[] accesses into registers. However, on - * machines with less than ~25 registers, that won't really work, - * and at least gcc will make an unholy mess of it. - * - * So to avoid that mess which just slows things down, we force - * the stores to memory to actually happen (we might be better off - * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as - * suggested by Artur Skawina - that will also make gcc unable to - * try to do the silly "optimize away loads" part because it won't - * see what the value will be). - * - * Ben Herrenschmidt reports that on PPC, the C version comes close - * to the optimized asm with this (ie on PPC you don't want that - * 'volatile', since there are lots of registers). - * - * On ARM we get the best code generation by forcing a full memory barrier - * between each SHA_ROUND, otherwise gcc happily get wild with spilling and - * the stack frame size simply explode and performance goes down the drain. - */ - -#if defined(__i386__) || defined(__x86_64__) - #define setW(x, val) (*(volatile unsigned int *)&W(x) = (val)) -#elif defined(__GNUC__) && defined(__arm__) - #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0) -#else - #define setW(x, val) (W(x) = (val)) -#endif - -/* This "rolls" over the 512-bit array */ -#define W(x) (array[(x)&15]) - -/* - * Where do we get the source from? The first 16 iterations get it from - * the input data, the next mix it from the 512-bit array. - */ -#define SHA_SRC(t) get_be32((unsigned char *) block + (t)*4) -#define SHA_MIX(t) SHA_ROL(W((t)+13) ^ W((t)+8) ^ W((t)+2) ^ W(t), 1); - -#define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \ - unsigned int TEMP = input(t); setW(t, TEMP); \ - E += TEMP + SHA_ROL(A,5) + (fn) + (constant); \ - B = SHA_ROR(B, 2); } while (0) - -#define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) -#define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) -#define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E ) -#define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E ) -#define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E ) - -static void blk_SHA1_Block(blk_SHA_CTX *ctx, const void *block) -{ - unsigned int A,B,C,D,E; - unsigned int array[16]; - - A = ctx->H[0]; - B = ctx->H[1]; - C = ctx->H[2]; - D = ctx->H[3]; - E = ctx->H[4]; - - /* Round 1 - iterations 0-16 take their input from 'block' */ - T_0_15( 0, A, B, C, D, E); - T_0_15( 1, E, A, B, C, D); - T_0_15( 2, D, E, A, B, C); - T_0_15( 3, C, D, E, A, B); - T_0_15( 4, B, C, D, E, A); - T_0_15( 5, A, B, C, D, E); - T_0_15( 6, E, A, B, C, D); - T_0_15( 7, D, E, A, B, C); - T_0_15( 8, C, D, E, A, B); - T_0_15( 9, B, C, D, E, A); - T_0_15(10, A, B, C, D, E); - T_0_15(11, E, A, B, C, D); - T_0_15(12, D, E, A, B, C); - T_0_15(13, C, D, E, A, B); - T_0_15(14, B, C, D, E, A); - T_0_15(15, A, B, C, D, E); - - /* Round 1 - tail. Input from 512-bit mixing array */ - T_16_19(16, E, A, B, C, D); - T_16_19(17, D, E, A, B, C); - T_16_19(18, C, D, E, A, B); - T_16_19(19, B, C, D, E, A); - - /* Round 2 */ - T_20_39(20, A, B, C, D, E); - T_20_39(21, E, A, B, C, D); - T_20_39(22, D, E, A, B, C); - T_20_39(23, C, D, E, A, B); - T_20_39(24, B, C, D, E, A); - T_20_39(25, A, B, C, D, E); - T_20_39(26, E, A, B, C, D); - T_20_39(27, D, E, A, B, C); - T_20_39(28, C, D, E, A, B); - T_20_39(29, B, C, D, E, A); - T_20_39(30, A, B, C, D, E); - T_20_39(31, E, A, B, C, D); - T_20_39(32, D, E, A, B, C); - T_20_39(33, C, D, E, A, B); - T_20_39(34, B, C, D, E, A); - T_20_39(35, A, B, C, D, E); - T_20_39(36, E, A, B, C, D); - T_20_39(37, D, E, A, B, C); - T_20_39(38, C, D, E, A, B); - T_20_39(39, B, C, D, E, A); - - /* Round 3 */ - T_40_59(40, A, B, C, D, E); - T_40_59(41, E, A, B, C, D); - T_40_59(42, D, E, A, B, C); - T_40_59(43, C, D, E, A, B); - T_40_59(44, B, C, D, E, A); - T_40_59(45, A, B, C, D, E); - T_40_59(46, E, A, B, C, D); - T_40_59(47, D, E, A, B, C); - T_40_59(48, C, D, E, A, B); - T_40_59(49, B, C, D, E, A); - T_40_59(50, A, B, C, D, E); - T_40_59(51, E, A, B, C, D); - T_40_59(52, D, E, A, B, C); - T_40_59(53, C, D, E, A, B); - T_40_59(54, B, C, D, E, A); - T_40_59(55, A, B, C, D, E); - T_40_59(56, E, A, B, C, D); - T_40_59(57, D, E, A, B, C); - T_40_59(58, C, D, E, A, B); - T_40_59(59, B, C, D, E, A); - - /* Round 4 */ - T_60_79(60, A, B, C, D, E); - T_60_79(61, E, A, B, C, D); - T_60_79(62, D, E, A, B, C); - T_60_79(63, C, D, E, A, B); - T_60_79(64, B, C, D, E, A); - T_60_79(65, A, B, C, D, E); - T_60_79(66, E, A, B, C, D); - T_60_79(67, D, E, A, B, C); - T_60_79(68, C, D, E, A, B); - T_60_79(69, B, C, D, E, A); - T_60_79(70, A, B, C, D, E); - T_60_79(71, E, A, B, C, D); - T_60_79(72, D, E, A, B, C); - T_60_79(73, C, D, E, A, B); - T_60_79(74, B, C, D, E, A); - T_60_79(75, A, B, C, D, E); - T_60_79(76, E, A, B, C, D); - T_60_79(77, D, E, A, B, C); - T_60_79(78, C, D, E, A, B); - T_60_79(79, B, C, D, E, A); - - ctx->H[0] += A; - ctx->H[1] += B; - ctx->H[2] += C; - ctx->H[3] += D; - ctx->H[4] += E; -} - -void blk_SHA1_Init(blk_SHA_CTX *ctx) -{ - ctx->size = 0; - - /* Initialize H with the magic constants (see FIPS180 for constants) */ - ctx->H[0] = 0x67452301; - ctx->H[1] = 0xefcdab89; - ctx->H[2] = 0x98badcfe; - ctx->H[3] = 0x10325476; - ctx->H[4] = 0xc3d2e1f0; -} - -void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len) -{ - unsigned int lenW = ctx->size & 63; - - ctx->size += len; - - /* Read the data into W and process blocks as they get full */ - if (lenW) { - unsigned int left = 64 - lenW; - if (len < left) - left = len; - memcpy(lenW + (char *)ctx->W, data, left); - lenW = (lenW + left) & 63; - len -= left; - data = ((const char *)data + left); - if (lenW) - return; - blk_SHA1_Block(ctx, ctx->W); - } - while (len >= 64) { - blk_SHA1_Block(ctx, data); - data = ((const char *)data + 64); - len -= 64; - } - if (len) - memcpy(ctx->W, data, len); -} - -void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx) -{ - static const unsigned char pad[64] = { 0x80 }; - unsigned int padlen[2]; - int i; - - /* Pad with a binary 1 (ie 0x80), then zeroes, then length */ - padlen[0] = htonl((uint32_t)(ctx->size >> 29)); - padlen[1] = htonl((uint32_t)(ctx->size << 3)); - - i = ctx->size & 63; - blk_SHA1_Update(ctx, pad, 1 + (63 & (55 - i))); - blk_SHA1_Update(ctx, padlen, 8); - - /* Output hash */ - for (i = 0; i < 5; i++) - put_be32(hashout + i * 4, ctx->H[i]); -} diff --git a/third_party/git/block-sha1/sha1.h b/third_party/git/block-sha1/sha1.h deleted file mode 100644 index 4df67477526a..000000000000 --- a/third_party/git/block-sha1/sha1.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * SHA1 routine optimized to do word accesses rather than byte accesses, - * and to avoid unnecessary copies into the context array. - * - * This was initially based on the Mozilla SHA1 implementation, although - * none of the original Mozilla code remains. - */ - -typedef struct { - unsigned long long size; - unsigned int H[5]; - unsigned int W[16]; -} blk_SHA_CTX; - -void blk_SHA1_Init(blk_SHA_CTX *ctx); -void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *dataIn, unsigned long len); -void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx); - -#define platform_SHA_CTX blk_SHA_CTX -#define platform_SHA1_Init blk_SHA1_Init -#define platform_SHA1_Update blk_SHA1_Update -#define platform_SHA1_Final blk_SHA1_Final |