about summary refs log tree commit diff
path: root/third_party/git/INSTALL
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/INSTALL')
-rw-r--r--third_party/git/INSTALL242
1 files changed, 0 insertions, 242 deletions
diff --git a/third_party/git/INSTALL b/third_party/git/INSTALL
deleted file mode 100644
index 9ba33e6a141a..000000000000
--- a/third_party/git/INSTALL
+++ /dev/null
@@ -1,242 +0,0 @@
-
-		Git installation
-
-Normally you can just do "make" followed by "make install", and that
-will install the git programs in your own ~/bin/ directory.  If you want
-to do a global install, you can do
-
-	$ make prefix=/usr all doc info ;# as yourself
-	# make prefix=/usr install install-doc install-html install-info ;# as root
-
-(or prefix=/usr/local, of course).  Just like any program suite
-that uses $prefix, the built results have some paths encoded,
-which are derived from $prefix, so "make all; make prefix=/usr
-install" would not work.
-
-The beginning of the Makefile documents many variables that affect the way
-git is built.  You can override them either from the command line, or in a
-config.mak file.
-
-Alternatively you can use autoconf generated ./configure script to
-set up install paths (via config.mak.autogen), so you can write instead
-
-	$ make configure ;# as yourself
-	$ ./configure --prefix=/usr ;# as yourself
-	$ make all doc ;# as yourself
-	# make install install-doc install-html;# as root
-
-If you're willing to trade off (much) longer build time for a later
-faster git you can also do a profile feedback build with
-
-	$ make prefix=/usr profile
-	# make prefix=/usr PROFILE=BUILD install
-
-This will run the complete test suite as training workload and then
-rebuild git with the generated profile feedback. This results in a git
-which is a few percent faster on CPU intensive workloads.  This
-may be a good tradeoff for distribution packagers.
-
-Alternatively you can run profile feedback only with the git benchmark
-suite. This runs significantly faster than the full test suite, but
-has less coverage:
-
-	$ make prefix=/usr profile-fast
-	# make prefix=/usr PROFILE=BUILD install
-
-Or if you just want to install a profile-optimized version of git into
-your home directory, you could run:
-
-	$ make profile-install
-
-or
-	$ make profile-fast-install
-
-As a caveat: a profile-optimized build takes a *lot* longer since the
-git tree must be built twice, and in order for the profiling
-measurements to work properly, ccache must be disabled and the test
-suite has to be run using only a single CPU.  In addition, the profile
-feedback build stage currently generates a lot of additional compiler
-warnings.
-
-Issues of note:
-
- - Ancient versions of GNU Interactive Tools (pre-4.9.2) installed a
-   program "git", whose name conflicts with this program.  But with
-   version 4.9.2, after long hiatus without active maintenance (since
-   around 1997), it changed its name to gnuit and the name conflict is no
-   longer a problem.
-
-   NOTE: When compiled with backward compatibility option, the GNU
-   Interactive Tools package still can install "git", but you can build it
-   with --disable-transition option to avoid this.
-
- - You can use git after building but without installing if you want
-   to test drive it.  Simply run git found in bin-wrappers directory
-   in the build directory, or prepend that directory to your $PATH.
-   This however is less efficient than running an installed git, as
-   you always need an extra fork+exec to run any git subcommand.
-
-   It is still possible to use git without installing by setting a few
-   environment variables, which was the way this was done
-   traditionally.  But using git found in bin-wrappers directory in
-   the build directory is far simpler.  As a historical reference, the
-   old way went like this:
-
-	GIT_EXEC_PATH=`pwd`
-	PATH=`pwd`:$PATH
-	GITPERLLIB=`pwd`/perl/build/lib
-	export GIT_EXEC_PATH PATH GITPERLLIB
-
- - By default (unless NO_PERL is provided) Git will ship various perl
-   scripts. However, for simplicity it doesn't use the
-   ExtUtils::MakeMaker toolchain to decide where to place the perl
-   libraries. Depending on the system this can result in the perl
-   libraries not being where you'd like them if they're expected to be
-   used by things other than Git itself.
-
-   Manually supplying a perllibdir prefix should fix this, if this is
-   a problem you care about, e.g.:
-
-       prefix=/usr perllibdir=/usr/$(/usr/bin/perl -MConfig -wle 'print substr $Config{installsitelib}, 1 + length $Config{siteprefixexp}')
-
-   Will result in e.g. perllibdir=/usr/share/perl/5.26.1 on Debian,
-   perllibdir=/usr/share/perl5 (which we'd use by default) on CentOS.
-
- - Unless NO_PERL is provided Git will ship various perl libraries it
-   needs. Distributors of Git will usually want to set
-   NO_PERL_CPAN_FALLBACKS if NO_PERL is not provided to use their own
-   copies of the CPAN modules Git needs.
-
- - Git is reasonably self-sufficient, but does depend on a few external
-   programs and libraries.  Git can be used without most of them by adding
-   the appropriate "NO_<LIBRARY>=YesPlease" to the make command line or
-   config.mak file.
-
-	- "zlib", the compression library. Git won't build without it.
-
-	- "ssh" is used to push and pull over the net.
-
-	- A POSIX-compliant shell is required to run some scripts needed
-	  for everyday use (e.g. "bisect", "request-pull").
-
-	- "Perl" version 5.8 or later is needed to use some of the
-	  features (e.g. preparing a partial commit using "git add -i/-p",
-	  interacting with svn repositories with "git svn").  If you can
-	  live without these, use NO_PERL.  Note that recent releases of
-	  Redhat/Fedora are reported to ship Perl binary package with some
-	  core modules stripped away (see http://lwn.net/Articles/477234/),
-	  so you might need to install additional packages other than Perl
-	  itself, e.g. Digest::MD5, File::Spec, File::Temp, Net::Domain,
-	  Net::SMTP, and Time::HiRes.
-
-	- git-imap-send needs the OpenSSL library to talk IMAP over SSL if
-	  you are using libcurl older than 7.34.0.  Otherwise you can use
-	  NO_OPENSSL without losing git-imap-send.
-
-	  By default, git uses OpenSSL for SHA1 but it will use its own
-	  library (inspired by Mozilla's) with either NO_OPENSSL or
-	  BLK_SHA1.  Also included is a version optimized for PowerPC
-	  (PPC_SHA1).
-
-	- "libcurl" library is used by git-http-fetch, git-fetch, and, if
-	  the curl version >= 7.34.0, for git-imap-send.  You might also
-	  want the "curl" executable for debugging purposes. If you do not
-	  use http:// or https:// repositories, and do not want to put
-	  patches into an IMAP mailbox, you do not have to have them
-	  (use NO_CURL).
-
-	- "expat" library; git-http-push uses it for remote lock
-	  management over DAV.  Similar to "curl" above, this is optional
-	  (with NO_EXPAT).
-
-	- "wish", the Tcl/Tk windowing shell is used in gitk to show the
-	  history graphically, and in git-gui.  If you don't want gitk or
-	  git-gui, you can use NO_TCLTK.
-
-	- A gettext library is used by default for localizing Git. The
-	  primary target is GNU libintl, but the Solaris gettext
-	  implementation also works.
-
-	  We need a gettext.h on the system for C code, gettext.sh (or
-	  Solaris gettext(1)) for shell scripts, and libintl-perl for Perl
-	  programs.
-
-	  Set NO_GETTEXT to disable localization support and make Git only
-	  use English. Under autoconf the configure script will do this
-	  automatically if it can't find libintl on the system.
-
-	- Python version 2.4 or later (but not 3.x, which is not
-	  supported by Perforce) is needed to use the git-p4 interface
-	  to Perforce.
-
- - Some platform specific issues are dealt with Makefile rules,
-   but depending on your specific installation, you may not
-   have all the libraries/tools needed, or you may have
-   necessary libraries at unusual locations.  Please look at the
-   top of the Makefile to see what can be adjusted for your needs.
-   You can place local settings in config.mak and the Makefile
-   will include them.  Note that config.mak is not distributed;
-   the name is reserved for local settings.
-
- - To build and install documentation suite, you need to have
-   the asciidoc/xmlto toolchain.  Because not many people are
-   inclined to install the tools, the default build target
-   ("make all") does _not_ build them.
-
-   "make doc" builds documentation in man and html formats; there are
-   also "make man", "make html" and "make info". Note that "make html"
-   requires asciidoc, but not xmlto. "make man" (and thus make doc)
-   requires both.
-
-   "make install-doc" installs documentation in man format only; there
-   are also "make install-man", "make install-html" and "make
-   install-info".
-
-   Building and installing the info file additionally requires
-   makeinfo and docbook2X.  Version 0.8.3 is known to work.
-
-   Building and installing the pdf file additionally requires
-   dblatex.  Version >= 0.2.7 is known to work.
-
-   All formats require at least asciidoc 8.4.1.
-
-   There are also "make quick-install-doc", "make quick-install-man"
-   and "make quick-install-html" which install preformatted man pages
-   and html documentation. To use these build targets, you need to
-   clone two separate git-htmldocs and git-manpages repositories next
-   to the clone of git itself.
-
-   The minimum supported version of docbook-xsl is 1.74.
-
-   Users attempting to build the documentation on Cygwin may need to ensure
-   that the /etc/xml/catalog file looks something like this:
-
-   <?xml version="1.0"?>
-   <!DOCTYPE catalog PUBLIC
-      "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN"
-      "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd"
-   >
-   <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
-     <rewriteURI
-       uriStartString = "http://docbook.sourceforge.net/release/xsl/current"
-       rewritePrefix = "/usr/share/sgml/docbook/xsl-stylesheets"
-     />
-     <rewriteURI
-       uriStartString="http://www.oasis-open.org/docbook/xml/4.5"
-       rewritePrefix="/usr/share/sgml/docbook/xml-dtd-4.5"
-     />
-  </catalog>
-
-  This can be achieved with the following two xmlcatalog commands:
-
-  xmlcatalog --noout \
-     --add rewriteURI \
-        http://docbook.sourceforge.net/release/xsl/current \
-        /usr/share/sgml/docbook/xsl-stylesheets \
-     /etc/xml/catalog
-
-  xmlcatalog --noout \
-     --add rewriteURI \
-         http://www.oasis-open.org/docbook/xml/4.5/xsl/current \
-         /usr/share/sgml/docbook/xml-dtd-4.5 \
-     /etc/xml/catalog