diff options
Diffstat (limited to 'third_party/git/INSTALL')
| -rw-r--r-- | third_party/git/INSTALL | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/third_party/git/INSTALL b/third_party/git/INSTALL new file mode 100644 index 000000000000..22c364f34f57 --- /dev/null +++ b/third_party/git/INSTALL @@ -0,0 +1,244 @@ + + Git installation + +Normally you can just do "make" followed by "make install", and that +will install the git programs in your own ~/bin/ directory. If you want +to do a global install, you can do + + $ make prefix=/usr all doc info ;# as yourself + # make prefix=/usr install install-doc install-html install-info ;# as root + +(or prefix=/usr/local, of course). Just like any program suite +that uses $prefix, the built results have some paths encoded, +which are derived from $prefix, so "make all; make prefix=/usr +install" would not work. + +The beginning of the Makefile documents many variables that affect the way +git is built. You can override them either from the command line, or in a +config.mak file. + +Alternatively you can use autoconf generated ./configure script to +set up install paths (via config.mak.autogen), so you can write instead + + $ make configure ;# as yourself + $ ./configure --prefix=/usr ;# as yourself + $ make all doc ;# as yourself + # make install install-doc install-html;# as root + +If you're willing to trade off (much) longer build time for a later +faster git you can also do a profile feedback build with + + $ make prefix=/usr profile + # make prefix=/usr PROFILE=BUILD install + +This will run the complete test suite as training workload and then +rebuild git with the generated profile feedback. This results in a git +which is a few percent faster on CPU intensive workloads. This +may be a good tradeoff for distribution packagers. + +Alternatively you can run profile feedback only with the git benchmark +suite. This runs significantly faster than the full test suite, but +has less coverage: + + $ make prefix=/usr profile-fast + # make prefix=/usr PROFILE=BUILD install + +Or if you just want to install a profile-optimized version of git into +your home directory, you could run: + + $ make profile-install + +or + $ make profile-fast-install + +As a caveat: a profile-optimized build takes a *lot* longer since the +git tree must be built twice, and in order for the profiling +measurements to work properly, ccache must be disabled and the test +suite has to be run using only a single CPU. In addition, the profile +feedback build stage currently generates a lot of additional compiler +warnings. + +Issues of note: + + - Ancient versions of GNU Interactive Tools (pre-4.9.2) installed a + program "git", whose name conflicts with this program. But with + version 4.9.2, after long hiatus without active maintenance (since + around 1997), it changed its name to gnuit and the name conflict is no + longer a problem. + + NOTE: When compiled with backward compatibility option, the GNU + Interactive Tools package still can install "git", but you can build it + with --disable-transition option to avoid this. + + - You can use git after building but without installing if you want + to test drive it. Simply run git found in bin-wrappers directory + in the build directory, or prepend that directory to your $PATH. + This however is less efficient than running an installed git, as + you always need an extra fork+exec to run any git subcommand. + + It is still possible to use git without installing by setting a few + environment variables, which was the way this was done + traditionally. But using git found in bin-wrappers directory in + the build directory is far simpler. As a historical reference, the + old way went like this: + + GIT_EXEC_PATH=`pwd` + PATH=`pwd`:$PATH + GITPERLLIB=`pwd`/perl/build/lib + export GIT_EXEC_PATH PATH GITPERLLIB + + - By default (unless NO_PERL is provided) Git will ship various perl + scripts. However, for simplicity it doesn't use the + ExtUtils::MakeMaker toolchain to decide where to place the perl + libraries. Depending on the system this can result in the perl + libraries not being where you'd like them if they're expected to be + used by things other than Git itself. + + Manually supplying a perllibdir prefix should fix this, if this is + a problem you care about, e.g.: + + prefix=/usr perllibdir=/usr/$(/usr/bin/perl -MConfig -wle 'print substr $Config{installsitelib}, 1 + length $Config{siteprefixexp}') + + Will result in e.g. perllibdir=/usr/share/perl/5.26.1 on Debian, + perllibdir=/usr/share/perl5 (which we'd use by default) on CentOS. + + - Unless NO_PERL is provided Git will ship various perl libraries it + needs. Distributors of Git will usually want to set + NO_PERL_CPAN_FALLBACKS if NO_PERL is not provided to use their own + copies of the CPAN modules Git needs. + + - Git is reasonably self-sufficient, but does depend on a few external + programs and libraries. Git can be used without most of them by adding + the appropriate "NO_<LIBRARY>=YesPlease" to the make command line or + config.mak file. + + - "zlib", the compression library. Git won't build without it. + + - "ssh" is used to push and pull over the net. + + - A POSIX-compliant shell is required to run some scripts needed + for everyday use (e.g. "bisect", "request-pull"). + + - "Perl" version 5.8 or later is needed to use some of the + features (e.g. preparing a partial commit using "git add -i/-p", + interacting with svn repositories with "git svn"). If you can + live without these, use NO_PERL. Note that recent releases of + Redhat/Fedora are reported to ship Perl binary package with some + core modules stripped away (see http://lwn.net/Articles/477234/), + so you might need to install additional packages other than Perl + itself, e.g. Digest::MD5, File::Spec, File::Temp, Net::Domain, + Net::SMTP, and Time::HiRes. + + - git-imap-send needs the OpenSSL library to talk IMAP over SSL if + you are using libcurl older than 7.34.0. Otherwise you can use + NO_OPENSSL without losing git-imap-send. + + By default, git uses OpenSSL for SHA1 but it will use its own + library (inspired by Mozilla's) with either NO_OPENSSL or + BLK_SHA1. Also included is a version optimized for PowerPC + (PPC_SHA1). + + - "libcurl" library is used by git-http-fetch, git-fetch, and, if + the curl version >= 7.34.0, for git-imap-send. You might also + want the "curl" executable for debugging purposes. If you do not + use http:// or https:// repositories, and do not want to put + patches into an IMAP mailbox, you do not have to have them + (use NO_CURL). + + - "expat" library; git-http-push uses it for remote lock + management over DAV. Similar to "curl" above, this is optional + (with NO_EXPAT). + + - "wish", the Tcl/Tk windowing shell is used in gitk to show the + history graphically, and in git-gui. If you don't want gitk or + git-gui, you can use NO_TCLTK. + + - A gettext library is used by default for localizing Git. The + primary target is GNU libintl, but the Solaris gettext + implementation also works. + + We need a gettext.h on the system for C code, gettext.sh (or + Solaris gettext(1)) for shell scripts, and libintl-perl for Perl + programs. + + Set NO_GETTEXT to disable localization support and make Git only + use English. Under autoconf the configure script will do this + automatically if it can't find libintl on the system. + + - Python version 2.4 or later (but not 3.x, which is not + supported by Perforce) is needed to use the git-p4 interface + to Perforce. + + - Some platform specific issues are dealt with Makefile rules, + but depending on your specific installation, you may not + have all the libraries/tools needed, or you may have + necessary libraries at unusual locations. Please look at the + top of the Makefile to see what can be adjusted for your needs. + You can place local settings in config.mak and the Makefile + will include them. Note that config.mak is not distributed; + the name is reserved for local settings. + + - To build and install documentation suite, you need to have + the asciidoc/xmlto toolchain. Because not many people are + inclined to install the tools, the default build target + ("make all") does _not_ build them. + + "make doc" builds documentation in man and html formats; there are + also "make man", "make html" and "make info". Note that "make html" + requires asciidoc, but not xmlto. "make man" (and thus make doc) + requires both. + + "make install-doc" installs documentation in man format only; there + are also "make install-man", "make install-html" and "make + install-info". + + Building and installing the info file additionally requires + makeinfo and docbook2X. Version 0.8.3 is known to work. + + Building and installing the pdf file additionally requires + dblatex. Version >= 0.2.7 is known to work. + + All formats require at least asciidoc 8.4.1. + + There are also "make quick-install-doc", "make quick-install-man" + and "make quick-install-html" which install preformatted man pages + and html documentation. To use these build targets, you need to + clone two separate git-htmldocs and git-manpages repositories next + to the clone of git itself. + + It has been reported that docbook-xsl version 1.72 and 1.73 are + buggy; 1.72 misformats manual pages for callouts, and 1.73 needs + the patch in contrib/patches/docbook-xsl-manpages-charmap.patch + + Users attempting to build the documentation on Cygwin may need to ensure + that the /etc/xml/catalog file looks something like this: + + <?xml version="1.0"?> + <!DOCTYPE catalog PUBLIC + "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN" + "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd" + > + <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog"> + <rewriteURI + uriStartString = "http://docbook.sourceforge.net/release/xsl/current" + rewritePrefix = "/usr/share/sgml/docbook/xsl-stylesheets" + /> + <rewriteURI + uriStartString="http://www.oasis-open.org/docbook/xml/4.5" + rewritePrefix="/usr/share/sgml/docbook/xml-dtd-4.5" + /> + </catalog> + + This can be achieved with the following two xmlcatalog commands: + + xmlcatalog --noout \ + --add rewriteURI \ + http://docbook.sourceforge.net/release/xsl/current \ + /usr/share/sgml/docbook/xsl-stylesheets \ + /etc/xml/catalog + + xmlcatalog --noout \ + --add rewriteURI \ + http://www.oasis-open.org/docbook/xml/4.5/xsl/current \ + /usr/share/sgml/docbook/xml-dtd-4.5 \ + /etc/xml/catalog |