about summary refs log tree commit diff
path: root/third_party/git/Documentation/gitcore-tutorial.txt
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/Documentation/gitcore-tutorial.txt')
-rw-r--r--third_party/git/Documentation/gitcore-tutorial.txt1660
1 files changed, 1660 insertions, 0 deletions
diff --git a/third_party/git/Documentation/gitcore-tutorial.txt b/third_party/git/Documentation/gitcore-tutorial.txt
new file mode 100644
index 000000000000..f880d21dfb52
--- /dev/null
+++ b/third_party/git/Documentation/gitcore-tutorial.txt
@@ -0,0 +1,1660 @@
+gitcore-tutorial(7)
+===================
+
+NAME
+----
+gitcore-tutorial - A Git core tutorial for developers
+
+SYNOPSIS
+--------
+git *
+
+DESCRIPTION
+-----------
+
+This tutorial explains how to use the "core" Git commands to set up and
+work with a Git repository.
+
+If you just need to use Git as a revision control system you may prefer
+to start with "A Tutorial Introduction to Git" (linkgit:gittutorial[7]) or
+link:user-manual.html[the Git User Manual].
+
+However, an understanding of these low-level tools can be helpful if
+you want to understand Git's internals.
+
+The core Git is often called "plumbing", with the prettier user
+interfaces on top of it called "porcelain". You may not want to use the
+plumbing directly very often, but it can be good to know what the
+plumbing does when the porcelain isn't flushing.
+
+Back when this document was originally written, many porcelain
+commands were shell scripts. For simplicity, it still uses them as
+examples to illustrate how plumbing is fit together to form the
+porcelain commands. The source tree includes some of these scripts in
+contrib/examples/ for reference. Although these are not implemented as
+shell scripts anymore, the description of what the plumbing layer
+commands do is still valid.
+
+[NOTE]
+Deeper technical details are often marked as Notes, which you can
+skip on your first reading.
+
+
+Creating a Git repository
+-------------------------
+
+Creating a new Git repository couldn't be easier: all Git repositories start
+out empty, and the only thing you need to do is find yourself a
+subdirectory that you want to use as a working tree - either an empty
+one for a totally new project, or an existing working tree that you want
+to import into Git.
+
+For our first example, we're going to start a totally new repository from
+scratch, with no pre-existing files, and we'll call it 'git-tutorial'.
+To start up, create a subdirectory for it, change into that
+subdirectory, and initialize the Git infrastructure with 'git init':
+
+------------------------------------------------
+$ mkdir git-tutorial
+$ cd git-tutorial
+$ git init
+------------------------------------------------
+
+to which Git will reply
+
+----------------
+Initialized empty Git repository in .git/
+----------------
+
+which is just Git's way of saying that you haven't been doing anything
+strange, and that it will have created a local `.git` directory setup for
+your new project. You will now have a `.git` directory, and you can
+inspect that with 'ls'. For your new empty project, it should show you
+three entries, among other things:
+
+ - a file called `HEAD`, that has `ref: refs/heads/master` in it.
+   This is similar to a symbolic link and points at
+   `refs/heads/master` relative to the `HEAD` file.
++
+Don't worry about the fact that the file that the `HEAD` link points to
+doesn't even exist yet -- you haven't created the commit that will
+start your `HEAD` development branch yet.
+
+ - a subdirectory called `objects`, which will contain all the
+   objects of your project. You should never have any real reason to
+   look at the objects directly, but you might want to know that these
+   objects are what contains all the real 'data' in your repository.
+
+ - a subdirectory called `refs`, which contains references to objects.
+
+In particular, the `refs` subdirectory will contain two other
+subdirectories, named `heads` and `tags` respectively. They do
+exactly what their names imply: they contain references to any number
+of different 'heads' of development (aka 'branches'), and to any
+'tags' that you have created to name specific versions in your
+repository.
+
+One note: the special `master` head is the default branch, which is
+why the `.git/HEAD` file was created points to it even if it
+doesn't yet exist. Basically, the `HEAD` link is supposed to always
+point to the branch you are working on right now, and you always
+start out expecting to work on the `master` branch.
+
+However, this is only a convention, and you can name your branches
+anything you want, and don't have to ever even 'have' a `master`
+branch. A number of the Git tools will assume that `.git/HEAD` is
+valid, though.
+
+[NOTE]
+An 'object' is identified by its 160-bit SHA-1 hash, aka 'object name',
+and a reference to an object is always the 40-byte hex
+representation of that SHA-1 name. The files in the `refs`
+subdirectory are expected to contain these hex references
+(usually with a final `\n` at the end), and you should thus
+expect to see a number of 41-byte files containing these
+references in these `refs` subdirectories when you actually start
+populating your tree.
+
+[NOTE]
+An advanced user may want to take a look at linkgit:gitrepository-layout[5]
+after finishing this tutorial.
+
+You have now created your first Git repository. Of course, since it's
+empty, that's not very useful, so let's start populating it with data.
+
+
+Populating a Git repository
+---------------------------
+
+We'll keep this simple and stupid, so we'll start off with populating a
+few trivial files just to get a feel for it.
+
+Start off with just creating any random files that you want to maintain
+in your Git repository. We'll start off with a few bad examples, just to
+get a feel for how this works:
+
+------------------------------------------------
+$ echo "Hello World" >hello
+$ echo "Silly example" >example
+------------------------------------------------
+
+you have now created two files in your working tree (aka 'working directory'),
+but to actually check in your hard work, you will have to go through two steps:
+
+ - fill in the 'index' file (aka 'cache') with the information about your
+   working tree state.
+
+ - commit that index file as an object.
+
+The first step is trivial: when you want to tell Git about any changes
+to your working tree, you use the 'git update-index' program. That
+program normally just takes a list of filenames you want to update, but
+to avoid trivial mistakes, it refuses to add new entries to the index
+(or remove existing ones) unless you explicitly tell it that you're
+adding a new entry with the `--add` flag (or removing an entry with the
+`--remove`) flag.
+
+So to populate the index with the two files you just created, you can do
+
+------------------------------------------------
+$ git update-index --add hello example
+------------------------------------------------
+
+and you have now told Git to track those two files.
+
+In fact, as you did that, if you now look into your object directory,
+you'll notice that Git will have added two new objects to the object
+database. If you did exactly the steps above, you should now be able to do
+
+
+----------------
+$ ls .git/objects/??/*
+----------------
+
+and see two files:
+
+----------------
+.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
+.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
+----------------
+
+which correspond with the objects with names of `557db...` and
+`f24c7...` respectively.
+
+If you want to, you can use 'git cat-file' to look at those objects, but
+you'll have to use the object name, not the filename of the object:
+
+----------------
+$ git cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238
+----------------
+
+where the `-t` tells 'git cat-file' to tell you what the "type" of the
+object is. Git will tell you that you have a "blob" object (i.e., just a
+regular file), and you can see the contents with
+
+----------------
+$ git cat-file blob 557db03
+----------------
+
+which will print out "Hello World". The object `557db03` is nothing
+more than the contents of your file `hello`.
+
+[NOTE]
+Don't confuse that object with the file `hello` itself. The
+object is literally just those specific *contents* of the file, and
+however much you later change the contents in file `hello`, the object
+we just looked at will never change. Objects are immutable.
+
+[NOTE]
+The second example demonstrates that you can
+abbreviate the object name to only the first several
+hexadecimal digits in most places.
+
+Anyway, as we mentioned previously, you normally never actually take a
+look at the objects themselves, and typing long 40-character hex
+names is not something you'd normally want to do. The above digression
+was just to show that 'git update-index' did something magical, and
+actually saved away the contents of your files into the Git object
+database.
+
+Updating the index did something else too: it created a `.git/index`
+file. This is the index that describes your current working tree, and
+something you should be very aware of. Again, you normally never worry
+about the index file itself, but you should be aware of the fact that
+you have not actually really "checked in" your files into Git so far,
+you've only *told* Git about them.
+
+However, since Git knows about them, you can now start using some of the
+most basic Git commands to manipulate the files or look at their status.
+
+In particular, let's not even check in the two files into Git yet, we'll
+start off by adding another line to `hello` first:
+
+------------------------------------------------
+$ echo "It's a new day for git" >>hello
+------------------------------------------------
+
+and you can now, since you told Git about the previous state of `hello`, ask
+Git what has changed in the tree compared to your old index, using the
+'git diff-files' command:
+
+------------
+$ git diff-files
+------------
+
+Oops. That wasn't very readable. It just spit out its own internal
+version of a 'diff', but that internal version really just tells you
+that it has noticed that "hello" has been modified, and that the old object
+contents it had have been replaced with something else.
+
+To make it readable, we can tell 'git diff-files' to output the
+differences as a patch, using the `-p` flag:
+
+------------
+$ git diff-files -p
+diff --git a/hello b/hello
+index 557db03..263414f 100644
+--- a/hello
++++ b/hello
+@@ -1 +1,2 @@
+ Hello World
++It's a new day for git
+------------
+
+i.e. the diff of the change we caused by adding another line to `hello`.
+
+In other words, 'git diff-files' always shows us the difference between
+what is recorded in the index, and what is currently in the working
+tree. That's very useful.
+
+A common shorthand for `git diff-files -p` is to just write `git
+diff`, which will do the same thing.
+
+------------
+$ git diff
+diff --git a/hello b/hello
+index 557db03..263414f 100644
+--- a/hello
++++ b/hello
+@@ -1 +1,2 @@
+ Hello World
++It's a new day for git
+------------
+
+
+Committing Git state
+--------------------
+
+Now, we want to go to the next stage in Git, which is to take the files
+that Git knows about in the index, and commit them as a real tree. We do
+that in two phases: creating a 'tree' object, and committing that 'tree'
+object as a 'commit' object together with an explanation of what the
+tree was all about, along with information of how we came to that state.
+
+Creating a tree object is trivial, and is done with 'git write-tree'.
+There are no options or other input: `git write-tree` will take the
+current index state, and write an object that describes that whole
+index. In other words, we're now tying together all the different
+filenames with their contents (and their permissions), and we're
+creating the equivalent of a Git "directory" object:
+
+------------------------------------------------
+$ git write-tree
+------------------------------------------------
+
+and this will just output the name of the resulting tree, in this case
+(if you have done exactly as I've described) it should be
+
+----------------
+8988da15d077d4829fc51d8544c097def6644dbb
+----------------
+
+which is another incomprehensible object name. Again, if you want to,
+you can use `git cat-file -t 8988d...` to see that this time the object
+is not a "blob" object, but a "tree" object (you can also use
+`git cat-file` to actually output the raw object contents, but you'll see
+mainly a binary mess, so that's less interesting).
+
+However -- normally you'd never use 'git write-tree' on its own, because
+normally you always commit a tree into a commit object using the
+'git commit-tree' command. In fact, it's easier to not actually use
+'git write-tree' on its own at all, but to just pass its result in as an
+argument to 'git commit-tree'.
+
+'git commit-tree' normally takes several arguments -- it wants to know
+what the 'parent' of a commit was, but since this is the first commit
+ever in this new repository, and it has no parents, we only need to pass in
+the object name of the tree. However, 'git commit-tree' also wants to get a
+commit message on its standard input, and it will write out the resulting
+object name for the commit to its standard output.
+
+And this is where we create the `.git/refs/heads/master` file
+which is pointed at by `HEAD`. This file is supposed to contain
+the reference to the top-of-tree of the master branch, and since
+that's exactly what 'git commit-tree' spits out, we can do this
+all with a sequence of simple shell commands:
+
+------------------------------------------------
+$ tree=$(git write-tree)
+$ commit=$(echo 'Initial commit' | git commit-tree $tree)
+$ git update-ref HEAD $commit
+------------------------------------------------
+
+In this case this creates a totally new commit that is not related to
+anything else. Normally you do this only *once* for a project ever, and
+all later commits will be parented on top of an earlier commit.
+
+Again, normally you'd never actually do this by hand. There is a
+helpful script called `git commit` that will do all of this for you. So
+you could have just written `git commit`
+instead, and it would have done the above magic scripting for you.
+
+
+Making a change
+---------------
+
+Remember how we did the 'git update-index' on file `hello` and then we
+changed `hello` afterward, and could compare the new state of `hello` with the
+state we saved in the index file?
+
+Further, remember how I said that 'git write-tree' writes the contents
+of the *index* file to the tree, and thus what we just committed was in
+fact the *original* contents of the file `hello`, not the new ones. We did
+that on purpose, to show the difference between the index state, and the
+state in the working tree, and how they don't have to match, even
+when we commit things.
+
+As before, if we do `git diff-files -p` in our git-tutorial project,
+we'll still see the same difference we saw last time: the index file
+hasn't changed by the act of committing anything. However, now that we
+have committed something, we can also learn to use a new command:
+'git diff-index'.
+
+Unlike 'git diff-files', which showed the difference between the index
+file and the working tree, 'git diff-index' shows the differences
+between a committed *tree* and either the index file or the working
+tree. In other words, 'git diff-index' wants a tree to be diffed
+against, and before we did the commit, we couldn't do that, because we
+didn't have anything to diff against.
+
+But now we can do
+
+----------------
+$ git diff-index -p HEAD
+----------------
+
+(where `-p` has the same meaning as it did in 'git diff-files'), and it
+will show us the same difference, but for a totally different reason.
+Now we're comparing the working tree not against the index file,
+but against the tree we just wrote. It just so happens that those two
+are obviously the same, so we get the same result.
+
+Again, because this is a common operation, you can also just shorthand
+it with
+
+----------------
+$ git diff HEAD
+----------------
+
+which ends up doing the above for you.
+
+In other words, 'git diff-index' normally compares a tree against the
+working tree, but when given the `--cached` flag, it is told to
+instead compare against just the index cache contents, and ignore the
+current working tree state entirely. Since we just wrote the index
+file to HEAD, doing `git diff-index --cached -p HEAD` should thus return
+an empty set of differences, and that's exactly what it does.
+
+[NOTE]
+================
+'git diff-index' really always uses the index for its
+comparisons, and saying that it compares a tree against the working
+tree is thus not strictly accurate. In particular, the list of
+files to compare (the "meta-data") *always* comes from the index file,
+regardless of whether the `--cached` flag is used or not. The `--cached`
+flag really only determines whether the file *contents* to be compared
+come from the working tree or not.
+
+This is not hard to understand, as soon as you realize that Git simply
+never knows (or cares) about files that it is not told about
+explicitly. Git will never go *looking* for files to compare, it
+expects you to tell it what the files are, and that's what the index
+is there for.
+================
+
+However, our next step is to commit the *change* we did, and again, to
+understand what's going on, keep in mind the difference between "working
+tree contents", "index file" and "committed tree". We have changes
+in the working tree that we want to commit, and we always have to
+work through the index file, so the first thing we need to do is to
+update the index cache:
+
+------------------------------------------------
+$ git update-index hello
+------------------------------------------------
+
+(note how we didn't need the `--add` flag this time, since Git knew
+about the file already).
+
+Note what happens to the different 'git diff-{asterisk}' versions here.
+After we've updated `hello` in the index, `git diff-files -p` now shows no
+differences, but `git diff-index -p HEAD` still *does* show that the
+current state is different from the state we committed. In fact, now
+'git diff-index' shows the same difference whether we use the `--cached`
+flag or not, since now the index is coherent with the working tree.
+
+Now, since we've updated `hello` in the index, we can commit the new
+version. We could do it by writing the tree by hand again, and
+committing the tree (this time we'd have to use the `-p HEAD` flag to
+tell commit that the HEAD was the *parent* of the new commit, and that
+this wasn't an initial commit any more), but you've done that once
+already, so let's just use the helpful script this time:
+
+------------------------------------------------
+$ git commit
+------------------------------------------------
+
+which starts an editor for you to write the commit message and tells you
+a bit about what you have done.
+
+Write whatever message you want, and all the lines that start with '#'
+will be pruned out, and the rest will be used as the commit message for
+the change. If you decide you don't want to commit anything after all at
+this point (you can continue to edit things and update the index), you
+can just leave an empty message. Otherwise `git commit` will commit
+the change for you.
+
+You've now made your first real Git commit. And if you're interested in
+looking at what `git commit` really does, feel free to investigate:
+it's a few very simple shell scripts to generate the helpful (?) commit
+message headers, and a few one-liners that actually do the
+commit itself ('git commit').
+
+
+Inspecting Changes
+------------------
+
+While creating changes is useful, it's even more useful if you can tell
+later what changed. The most useful command for this is another of the
+'diff' family, namely 'git diff-tree'.
+
+'git diff-tree' can be given two arbitrary trees, and it will tell you the
+differences between them. Perhaps even more commonly, though, you can
+give it just a single commit object, and it will figure out the parent
+of that commit itself, and show the difference directly. Thus, to get
+the same diff that we've already seen several times, we can now do
+
+----------------
+$ git diff-tree -p HEAD
+----------------
+
+(again, `-p` means to show the difference as a human-readable patch),
+and it will show what the last commit (in `HEAD`) actually changed.
+
+[NOTE]
+============
+Here is an ASCII art by Jon Loeliger that illustrates how
+various 'diff-{asterisk}' commands compare things.
+
+                      diff-tree
+                       +----+
+                       |    |
+                       |    |
+                       V    V
+                    +-----------+
+                    | Object DB |
+                    |  Backing  |
+                    |   Store   |
+                    +-----------+
+                      ^    ^
+                      |    |
+                      |    |  diff-index --cached
+                      |    |
+          diff-index  |    V
+                      |  +-----------+
+                      |  |   Index   |
+                      |  |  "cache"  |
+                      |  +-----------+
+                      |    ^
+                      |    |
+                      |    |  diff-files
+                      |    |
+                      V    V
+                    +-----------+
+                    |  Working  |
+                    | Directory |
+                    +-----------+
+============
+
+More interestingly, you can also give 'git diff-tree' the `--pretty` flag,
+which tells it to also show the commit message and author and date of the
+commit, and you can tell it to show a whole series of diffs.
+Alternatively, you can tell it to be "silent", and not show the diffs at
+all, but just show the actual commit message.
+
+In fact, together with the 'git rev-list' program (which generates a
+list of revisions), 'git diff-tree' ends up being a veritable fount of
+changes.  You can emulate `git log`, `git log -p`, etc. with a trivial
+script that pipes the output of `git rev-list` to `git diff-tree --stdin`,
+which was exactly how early versions of `git log` were implemented.
+
+
+Tagging a version
+-----------------
+
+In Git, there are two kinds of tags, a "light" one, and an "annotated tag".
+
+A "light" tag is technically nothing more than a branch, except we put
+it in the `.git/refs/tags/` subdirectory instead of calling it a `head`.
+So the simplest form of tag involves nothing more than
+
+------------------------------------------------
+$ git tag my-first-tag
+------------------------------------------------
+
+which just writes the current `HEAD` into the `.git/refs/tags/my-first-tag`
+file, after which point you can then use this symbolic name for that
+particular state. You can, for example, do
+
+----------------
+$ git diff my-first-tag
+----------------
+
+to diff your current state against that tag which at this point will
+obviously be an empty diff, but if you continue to develop and commit
+stuff, you can use your tag as an "anchor-point" to see what has changed
+since you tagged it.
+
+An "annotated tag" is actually a real Git object, and contains not only a
+pointer to the state you want to tag, but also a small tag name and
+message, along with optionally a PGP signature that says that yes,
+you really did
+that tag. You create these annotated tags with either the `-a` or
+`-s` flag to 'git tag':
+
+----------------
+$ git tag -s <tagname>
+----------------
+
+which will sign the current `HEAD` (but you can also give it another
+argument that specifies the thing to tag, e.g., you could have tagged the
+current `mybranch` point by using `git tag <tagname> mybranch`).
+
+You normally only do signed tags for major releases or things
+like that, while the light-weight tags are useful for any marking you
+want to do -- any time you decide that you want to remember a certain
+point, just create a private tag for it, and you have a nice symbolic
+name for the state at that point.
+
+
+Copying repositories
+--------------------
+
+Git repositories are normally totally self-sufficient and relocatable.
+Unlike CVS, for example, there is no separate notion of
+"repository" and "working tree". A Git repository normally *is* the
+working tree, with the local Git information hidden in the `.git`
+subdirectory. There is nothing else. What you see is what you got.
+
+[NOTE]
+You can tell Git to split the Git internal information from
+the directory that it tracks, but we'll ignore that for now: it's not
+how normal projects work, and it's really only meant for special uses.
+So the mental model of "the Git information is always tied directly to
+the working tree that it describes" may not be technically 100%
+accurate, but it's a good model for all normal use.
+
+This has two implications:
+
+ - if you grow bored with the tutorial repository you created (or you've
+   made a mistake and want to start all over), you can just do simple
++
+----------------
+$ rm -rf git-tutorial
+----------------
++
+and it will be gone. There's no external repository, and there's no
+history outside the project you created.
+
+ - if you want to move or duplicate a Git repository, you can do so. There
+   is 'git clone' command, but if all you want to do is just to
+   create a copy of your repository (with all the full history that
+   went along with it), you can do so with a regular
+   `cp -a git-tutorial new-git-tutorial`.
++
+Note that when you've moved or copied a Git repository, your Git index
+file (which caches various information, notably some of the "stat"
+information for the files involved) will likely need to be refreshed.
+So after you do a `cp -a` to create a new copy, you'll want to do
++
+----------------
+$ git update-index --refresh
+----------------
++
+in the new repository to make sure that the index file is up to date.
+
+Note that the second point is true even across machines. You can
+duplicate a remote Git repository with *any* regular copy mechanism, be it
+'scp', 'rsync' or 'wget'.
+
+When copying a remote repository, you'll want to at a minimum update the
+index cache when you do this, and especially with other peoples'
+repositories you often want to make sure that the index cache is in some
+known state (you don't know *what* they've done and not yet checked in),
+so usually you'll precede the 'git update-index' with a
+
+----------------
+$ git read-tree --reset HEAD
+$ git update-index --refresh
+----------------
+
+which will force a total index re-build from the tree pointed to by `HEAD`.
+It resets the index contents to `HEAD`, and then the 'git update-index'
+makes sure to match up all index entries with the checked-out files.
+If the original repository had uncommitted changes in its
+working tree, `git update-index --refresh` notices them and
+tells you they need to be updated.
+
+The above can also be written as simply
+
+----------------
+$ git reset
+----------------
+
+and in fact a lot of the common Git command combinations can be scripted
+with the `git xyz` interfaces.  You can learn things by just looking
+at what the various git scripts do.  For example, `git reset` used to be
+the above two lines implemented in 'git reset', but some things like
+'git status' and 'git commit' are slightly more complex scripts around
+the basic Git commands.
+
+Many (most?) public remote repositories will not contain any of
+the checked out files or even an index file, and will *only* contain the
+actual core Git files. Such a repository usually doesn't even have the
+`.git` subdirectory, but has all the Git files directly in the
+repository.
+
+To create your own local live copy of such a "raw" Git repository, you'd
+first create your own subdirectory for the project, and then copy the
+raw repository contents into the `.git` directory. For example, to
+create your own copy of the Git repository, you'd do the following
+
+----------------
+$ mkdir my-git
+$ cd my-git
+$ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
+----------------
+
+followed by
+
+----------------
+$ git read-tree HEAD
+----------------
+
+to populate the index. However, now you have populated the index, and
+you have all the Git internal files, but you will notice that you don't
+actually have any of the working tree files to work on. To get
+those, you'd check them out with
+
+----------------
+$ git checkout-index -u -a
+----------------
+
+where the `-u` flag means that you want the checkout to keep the index
+up to date (so that you don't have to refresh it afterward), and the
+`-a` flag means "check out all files" (if you have a stale copy or an
+older version of a checked out tree you may also need to add the `-f`
+flag first, to tell 'git checkout-index' to *force* overwriting of any old
+files).
+
+Again, this can all be simplified with
+
+----------------
+$ git clone git://git.kernel.org/pub/scm/git/git.git/ my-git
+$ cd my-git
+$ git checkout
+----------------
+
+which will end up doing all of the above for you.
+
+You have now successfully copied somebody else's (mine) remote
+repository, and checked it out.
+
+
+Creating a new branch
+---------------------
+
+Branches in Git are really nothing more than pointers into the Git
+object database from within the `.git/refs/` subdirectory, and as we
+already discussed, the `HEAD` branch is nothing but a symlink to one of
+these object pointers.
+
+You can at any time create a new branch by just picking an arbitrary
+point in the project history, and just writing the SHA-1 name of that
+object into a file under `.git/refs/heads/`. You can use any filename you
+want (and indeed, subdirectories), but the convention is that the
+"normal" branch is called `master`. That's just a convention, though,
+and nothing enforces it.
+
+To show that as an example, let's go back to the git-tutorial repository we
+used earlier, and create a branch in it. You do that by simply just
+saying that you want to check out a new branch:
+
+------------
+$ git switch -c mybranch
+------------
+
+will create a new branch based at the current `HEAD` position, and switch
+to it.
+
+[NOTE]
+================================================
+If you make the decision to start your new branch at some
+other point in the history than the current `HEAD`, you can do so by
+just telling 'git checkout' what the base of the checkout would be.
+In other words, if you have an earlier tag or branch, you'd just do
+
+------------
+$ git switch -c mybranch earlier-commit
+------------
+
+and it would create the new branch `mybranch` at the earlier commit,
+and check out the state at that time.
+================================================
+
+You can always just jump back to your original `master` branch by doing
+
+------------
+$ git switch master
+------------
+
+(or any other branch-name, for that matter) and if you forget which
+branch you happen to be on, a simple
+
+------------
+$ cat .git/HEAD
+------------
+
+will tell you where it's pointing.  To get the list of branches
+you have, you can say
+
+------------
+$ git branch
+------------
+
+which used to be nothing more than a simple script around `ls .git/refs/heads`.
+There will be an asterisk in front of the branch you are currently on.
+
+Sometimes you may wish to create a new branch _without_ actually
+checking it out and switching to it. If so, just use the command
+
+------------
+$ git branch <branchname> [startingpoint]
+------------
+
+which will simply _create_ the branch, but will not do anything further.
+You can then later -- once you decide that you want to actually develop
+on that branch -- switch to that branch with a regular 'git switch'
+with the branchname as the argument.
+
+
+Merging two branches
+--------------------
+
+One of the ideas of having a branch is that you do some (possibly
+experimental) work in it, and eventually merge it back to the main
+branch. So assuming you created the above `mybranch` that started out
+being the same as the original `master` branch, let's make sure we're in
+that branch, and do some work there.
+
+------------------------------------------------
+$ git switch mybranch
+$ echo "Work, work, work" >>hello
+$ git commit -m "Some work." -i hello
+------------------------------------------------
+
+Here, we just added another line to `hello`, and we used a shorthand for
+doing both `git update-index hello` and `git commit` by just giving the
+filename directly to `git commit`, with an `-i` flag (it tells
+Git to 'include' that file in addition to what you have done to
+the index file so far when making the commit).  The `-m` flag is to give the
+commit log message from the command line.
+
+Now, to make it a bit more interesting, let's assume that somebody else
+does some work in the original branch, and simulate that by going back
+to the master branch, and editing the same file differently there:
+
+------------
+$ git switch master
+------------
+
+Here, take a moment to look at the contents of `hello`, and notice how they
+don't contain the work we just did in `mybranch` -- because that work
+hasn't happened in the `master` branch at all. Then do
+
+------------
+$ echo "Play, play, play" >>hello
+$ echo "Lots of fun" >>example
+$ git commit -m "Some fun." -i hello example
+------------
+
+since the master branch is obviously in a much better mood.
+
+Now, you've got two branches, and you decide that you want to merge the
+work done. Before we do that, let's introduce a cool graphical tool that
+helps you view what's going on:
+
+----------------
+$ gitk --all
+----------------
+
+will show you graphically both of your branches (that's what the `--all`
+means: normally it will just show you your current `HEAD`) and their
+histories. You can also see exactly how they came to be from a common
+source.
+
+Anyway, let's exit 'gitk' (`^Q` or the File menu), and decide that we want
+to merge the work we did on the `mybranch` branch into the `master`
+branch (which is currently our `HEAD` too). To do that, there's a nice
+script called 'git merge', which wants to know which branches you want
+to resolve and what the merge is all about:
+
+------------
+$ git merge -m "Merge work in mybranch" mybranch
+------------
+
+where the first argument is going to be used as the commit message if
+the merge can be resolved automatically.
+
+Now, in this case we've intentionally created a situation where the
+merge will need to be fixed up by hand, though, so Git will do as much
+of it as it can automatically (which in this case is just merge the `example`
+file, which had no differences in the `mybranch` branch), and say:
+
+----------------
+	Auto-merging hello
+	CONFLICT (content): Merge conflict in hello
+	Automatic merge failed; fix conflicts and then commit the result.
+----------------
+
+It tells you that it did an "Automatic merge", which
+failed due to conflicts in `hello`.
+
+Not to worry. It left the (trivial) conflict in `hello` in the same form you
+should already be well used to if you've ever used CVS, so let's just
+open `hello` in our editor (whatever that may be), and fix it up somehow.
+I'd suggest just making it so that `hello` contains all four lines:
+
+------------
+Hello World
+It's a new day for git
+Play, play, play
+Work, work, work
+------------
+
+and once you're happy with your manual merge, just do a
+
+------------
+$ git commit -i hello
+------------
+
+which will very loudly warn you that you're now committing a merge
+(which is correct, so never mind), and you can write a small merge
+message about your adventures in 'git merge'-land.
+
+After you're done, start up `gitk --all` to see graphically what the
+history looks like. Notice that `mybranch` still exists, and you can
+switch to it, and continue to work with it if you want to. The
+`mybranch` branch will not contain the merge, but next time you merge it
+from the `master` branch, Git will know how you merged it, so you'll not
+have to do _that_ merge again.
+
+Another useful tool, especially if you do not always work in X-Window
+environment, is `git show-branch`.
+
+------------------------------------------------
+$ git show-branch --topo-order --more=1 master mybranch
+* [master] Merge work in mybranch
+ ! [mybranch] Some work.
+--
+-  [master] Merge work in mybranch
+*+ [mybranch] Some work.
+*  [master^] Some fun.
+------------------------------------------------
+
+The first two lines indicate that it is showing the two branches
+with the titles of their top-of-the-tree commits, you are currently on
+`master` branch (notice the asterisk `*` character), and the first
+column for the later output lines is used to show commits contained in the
+`master` branch, and the second column for the `mybranch`
+branch. Three commits are shown along with their titles.
+All of them have non blank characters in the first column (`*`
+shows an ordinary commit on the current branch, `-` is a merge commit), which
+means they are now part of the `master` branch. Only the "Some
+work" commit has the plus `+` character in the second column,
+because `mybranch` has not been merged to incorporate these
+commits from the master branch.  The string inside brackets
+before the commit log message is a short name you can use to
+name the commit.  In the above example, 'master' and 'mybranch'
+are branch heads.  'master^' is the first parent of 'master'
+branch head.  Please see linkgit:gitrevisions[7] if you want to
+see more complex cases.
+
+[NOTE]
+Without the '--more=1' option, 'git show-branch' would not output the
+'[master^]' commit, as '[mybranch]' commit is a common ancestor of
+both 'master' and 'mybranch' tips.  Please see linkgit:git-show-branch[1]
+for details.
+
+[NOTE]
+If there were more commits on the 'master' branch after the merge, the
+merge commit itself would not be shown by 'git show-branch' by
+default.  You would need to provide `--sparse` option to make the
+merge commit visible in this case.
+
+Now, let's pretend you are the one who did all the work in
+`mybranch`, and the fruit of your hard work has finally been merged
+to the `master` branch. Let's go back to `mybranch`, and run
+'git merge' to get the "upstream changes" back to your branch.
+
+------------
+$ git switch mybranch
+$ git merge -m "Merge upstream changes." master
+------------
+
+This outputs something like this (the actual commit object names
+would be different)
+
+----------------
+Updating from ae3a2da... to a80b4aa....
+Fast-forward (no commit created; -m option ignored)
+ example | 1 +
+ hello   | 1 +
+ 2 files changed, 2 insertions(+)
+----------------
+
+Because your branch did not contain anything more than what had
+already been merged into the `master` branch, the merge operation did
+not actually do a merge. Instead, it just updated the top of
+the tree of your branch to that of the `master` branch. This is
+often called 'fast-forward' merge.
+
+You can run `gitk --all` again to see how the commit ancestry
+looks like, or run 'show-branch', which tells you this.
+
+------------------------------------------------
+$ git show-branch master mybranch
+! [master] Merge work in mybranch
+ * [mybranch] Merge work in mybranch
+--
+-- [master] Merge work in mybranch
+------------------------------------------------
+
+
+Merging external work
+---------------------
+
+It's usually much more common that you merge with somebody else than
+merging with your own branches, so it's worth pointing out that Git
+makes that very easy too, and in fact, it's not that different from
+doing a 'git merge'. In fact, a remote merge ends up being nothing
+more than "fetch the work from a remote repository into a temporary tag"
+followed by a 'git merge'.
+
+Fetching from a remote repository is done by, unsurprisingly,
+'git fetch':
+
+----------------
+$ git fetch <remote-repository>
+----------------
+
+One of the following transports can be used to name the
+repository to download from:
+
+SSH::
+	`remote.machine:/path/to/repo.git/` or
++
+`ssh://remote.machine/path/to/repo.git/`
++
+This transport can be used for both uploading and downloading,
+and requires you to have a log-in privilege over `ssh` to the
+remote machine.  It finds out the set of objects the other side
+lacks by exchanging the head commits both ends have and
+transfers (close to) minimum set of objects.  It is by far the
+most efficient way to exchange Git objects between repositories.
+
+Local directory::
+	`/path/to/repo.git/`
++
+This transport is the same as SSH transport but uses 'sh' to run
+both ends on the local machine instead of running other end on
+the remote machine via 'ssh'.
+
+Git Native::
+	`git://remote.machine/path/to/repo.git/`
++
+This transport was designed for anonymous downloading.  Like SSH
+transport, it finds out the set of objects the downstream side
+lacks and transfers (close to) minimum set of objects.
+
+HTTP(S)::
+	`http://remote.machine/path/to/repo.git/`
++
+Downloader from http and https URL
+first obtains the topmost commit object name from the remote site
+by looking at the specified refname under `repo.git/refs/` directory,
+and then tries to obtain the
+commit object by downloading from `repo.git/objects/xx/xxx...`
+using the object name of that commit object.  Then it reads the
+commit object to find out its parent commits and the associate
+tree object; it repeats this process until it gets all the
+necessary objects.  Because of this behavior, they are
+sometimes also called 'commit walkers'.
++
+The 'commit walkers' are sometimes also called 'dumb
+transports', because they do not require any Git aware smart
+server like Git Native transport does.  Any stock HTTP server
+that does not even support directory index would suffice.  But
+you must prepare your repository with 'git update-server-info'
+to help dumb transport downloaders.
+
+Once you fetch from the remote repository, you `merge` that
+with your current branch.
+
+However -- it's such a common thing to `fetch` and then
+immediately `merge`, that it's called `git pull`, and you can
+simply do
+
+----------------
+$ git pull <remote-repository>
+----------------
+
+and optionally give a branch-name for the remote end as a second
+argument.
+
+[NOTE]
+You could do without using any branches at all, by
+keeping as many local repositories as you would like to have
+branches, and merging between them with 'git pull', just like
+you merge between branches. The advantage of this approach is
+that it lets you keep a set of files for each `branch` checked
+out and you may find it easier to switch back and forth if you
+juggle multiple lines of development simultaneously. Of
+course, you will pay the price of more disk usage to hold
+multiple working trees, but disk space is cheap these days.
+
+It is likely that you will be pulling from the same remote
+repository from time to time. As a short hand, you can store
+the remote repository URL in the local repository's config file
+like this:
+
+------------------------------------------------
+$ git config remote.linus.url http://www.kernel.org/pub/scm/git/git.git/
+------------------------------------------------
+
+and use the "linus" keyword with 'git pull' instead of the full URL.
+
+Examples.
+
+. `git pull linus`
+. `git pull linus tag v0.99.1`
+
+the above are equivalent to:
+
+. `git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD`
+. `git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1`
+
+
+How does the merge work?
+------------------------
+
+We said this tutorial shows what plumbing does to help you cope
+with the porcelain that isn't flushing, but we so far did not
+talk about how the merge really works.  If you are following
+this tutorial the first time, I'd suggest to skip to "Publishing
+your work" section and come back here later.
+
+OK, still with me?  To give us an example to look at, let's go
+back to the earlier repository with "hello" and "example" file,
+and bring ourselves back to the pre-merge state:
+
+------------
+$ git show-branch --more=2 master mybranch
+! [master] Merge work in mybranch
+ * [mybranch] Merge work in mybranch
+--
+-- [master] Merge work in mybranch
++* [master^2] Some work.
++* [master^] Some fun.
+------------
+
+Remember, before running 'git merge', our `master` head was at
+"Some fun." commit, while our `mybranch` head was at "Some
+work." commit.
+
+------------
+$ git switch -C mybranch master^2
+$ git switch master
+$ git reset --hard master^
+------------
+
+After rewinding, the commit structure should look like this:
+
+------------
+$ git show-branch
+* [master] Some fun.
+ ! [mybranch] Some work.
+--
+*  [master] Some fun.
+ + [mybranch] Some work.
+*+ [master^] Initial commit
+------------
+
+Now we are ready to experiment with the merge by hand.
+
+`git merge` command, when merging two branches, uses 3-way merge
+algorithm.  First, it finds the common ancestor between them.
+The command it uses is 'git merge-base':
+
+------------
+$ mb=$(git merge-base HEAD mybranch)
+------------
+
+The command writes the commit object name of the common ancestor
+to the standard output, so we captured its output to a variable,
+because we will be using it in the next step.  By the way, the common
+ancestor commit is the "Initial commit" commit in this case.  You can
+tell it by:
+
+------------
+$ git name-rev --name-only --tags $mb
+my-first-tag
+------------
+
+After finding out a common ancestor commit, the second step is
+this:
+
+------------
+$ git read-tree -m -u $mb HEAD mybranch
+------------
+
+This is the same 'git read-tree' command we have already seen,
+but it takes three trees, unlike previous examples.  This reads
+the contents of each tree into different 'stage' in the index
+file (the first tree goes to stage 1, the second to stage 2,
+etc.).  After reading three trees into three stages, the paths
+that are the same in all three stages are 'collapsed' into stage
+0.  Also paths that are the same in two of three stages are
+collapsed into stage 0, taking the SHA-1 from either stage 2 or
+stage 3, whichever is different from stage 1 (i.e. only one side
+changed from the common ancestor).
+
+After 'collapsing' operation, paths that are different in three
+trees are left in non-zero stages.  At this point, you can
+inspect the index file with this command:
+
+------------
+$ git ls-files --stage
+100644 7f8b141b65fdcee47321e399a2598a235a032422 0	example
+100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1	hello
+100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2	hello
+100644 cc44c73eb783565da5831b4d820c962954019b69 3	hello
+------------
+
+In our example of only two files, we did not have unchanged
+files so only 'example' resulted in collapsing.  But in real-life
+large projects, when only a small number of files change in one commit,
+this 'collapsing' tends to trivially merge most of the paths
+fairly quickly, leaving only a handful of real changes in non-zero
+stages.
+
+To look at only non-zero stages, use `--unmerged` flag:
+
+------------
+$ git ls-files --unmerged
+100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1	hello
+100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2	hello
+100644 cc44c73eb783565da5831b4d820c962954019b69 3	hello
+------------
+
+The next step of merging is to merge these three versions of the
+file, using 3-way merge.  This is done by giving
+'git merge-one-file' command as one of the arguments to
+'git merge-index' command:
+
+------------
+$ git merge-index git-merge-one-file hello
+Auto-merging hello
+ERROR: Merge conflict in hello
+fatal: merge program failed
+------------
+
+'git merge-one-file' script is called with parameters to
+describe those three versions, and is responsible to leave the
+merge results in the working tree.
+It is a fairly straightforward shell script, and
+eventually calls 'merge' program from RCS suite to perform a
+file-level 3-way merge.  In this case, 'merge' detects
+conflicts, and the merge result with conflict marks is left in
+the working tree..  This can be seen if you run `ls-files
+--stage` again at this point:
+
+------------
+$ git ls-files --stage
+100644 7f8b141b65fdcee47321e399a2598a235a032422 0	example
+100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1	hello
+100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2	hello
+100644 cc44c73eb783565da5831b4d820c962954019b69 3	hello
+------------
+
+This is the state of the index file and the working file after
+'git merge' returns control back to you, leaving the conflicting
+merge for you to resolve.  Notice that the path `hello` is still
+unmerged, and what you see with 'git diff' at this point is
+differences since stage 2 (i.e. your version).
+
+
+Publishing your work
+--------------------
+
+So, we can use somebody else's work from a remote repository, but
+how can *you* prepare a repository to let other people pull from
+it?
+
+You do your real work in your working tree that has your
+primary repository hanging under it as its `.git` subdirectory.
+You *could* make that repository accessible remotely and ask
+people to pull from it, but in practice that is not the way
+things are usually done. A recommended way is to have a public
+repository, make it reachable by other people, and when the
+changes you made in your primary working tree are in good shape,
+update the public repository from it. This is often called
+'pushing'.
+
+[NOTE]
+This public repository could further be mirrored, and that is
+how Git repositories at `kernel.org` are managed.
+
+Publishing the changes from your local (private) repository to
+your remote (public) repository requires a write privilege on
+the remote machine. You need to have an SSH account there to
+run a single command, 'git-receive-pack'.
+
+First, you need to create an empty repository on the remote
+machine that will house your public repository. This empty
+repository will be populated and be kept up to date by pushing
+into it later. Obviously, this repository creation needs to be
+done only once.
+
+[NOTE]
+'git push' uses a pair of commands,
+'git send-pack' on your local machine, and 'git-receive-pack'
+on the remote machine. The communication between the two over
+the network internally uses an SSH connection.
+
+Your private repository's Git directory is usually `.git`, but
+your public repository is often named after the project name,
+i.e. `<project>.git`. Let's create such a public repository for
+project `my-git`. After logging into the remote machine, create
+an empty directory:
+
+------------
+$ mkdir my-git.git
+------------
+
+Then, make that directory into a Git repository by running
+'git init', but this time, since its name is not the usual
+`.git`, we do things slightly differently:
+
+------------
+$ GIT_DIR=my-git.git git init
+------------
+
+Make sure this directory is available for others you want your
+changes to be pulled via the transport of your choice. Also
+you need to make sure that you have the 'git-receive-pack'
+program on the `$PATH`.
+
+[NOTE]
+Many installations of sshd do not invoke your shell as the login
+shell when you directly run programs; what this means is that if
+your login shell is 'bash', only `.bashrc` is read and not
+`.bash_profile`. As a workaround, make sure `.bashrc` sets up
+`$PATH` so that you can run 'git-receive-pack' program.
+
+[NOTE]
+If you plan to publish this repository to be accessed over http,
+you should do `mv my-git.git/hooks/post-update.sample
+my-git.git/hooks/post-update` at this point.
+This makes sure that every time you push into this
+repository, `git update-server-info` is run.
+
+Your "public repository" is now ready to accept your changes.
+Come back to the machine you have your private repository. From
+there, run this command:
+
+------------
+$ git push <public-host>:/path/to/my-git.git master
+------------
+
+This synchronizes your public repository to match the named
+branch head (i.e. `master` in this case) and objects reachable
+from them in your current repository.
+
+As a real example, this is how I update my public Git
+repository. Kernel.org mirror network takes care of the
+propagation to other publicly visible machines:
+
+------------
+$ git push master.kernel.org:/pub/scm/git/git.git/
+------------
+
+
+Packing your repository
+-----------------------
+
+Earlier, we saw that one file under `.git/objects/??/` directory
+is stored for each Git object you create. This representation
+is efficient to create atomically and safely, but
+not so convenient to transport over the network. Since Git objects are
+immutable once they are created, there is a way to optimize the
+storage by "packing them together". The command
+
+------------
+$ git repack
+------------
+
+will do it for you. If you followed the tutorial examples, you
+would have accumulated about 17 objects in `.git/objects/??/`
+directories by now. 'git repack' tells you how many objects it
+packed, and stores the packed file in the `.git/objects/pack`
+directory.
+
+[NOTE]
+You will see two files, `pack-*.pack` and `pack-*.idx`,
+in `.git/objects/pack` directory. They are closely related to
+each other, and if you ever copy them by hand to a different
+repository for whatever reason, you should make sure you copy
+them together. The former holds all the data from the objects
+in the pack, and the latter holds the index for random
+access.
+
+If you are paranoid, running 'git verify-pack' command would
+detect if you have a corrupt pack, but do not worry too much.
+Our programs are always perfect ;-).
+
+Once you have packed objects, you do not need to leave the
+unpacked objects that are contained in the pack file anymore.
+
+------------
+$ git prune-packed
+------------
+
+would remove them for you.
+
+You can try running `find .git/objects -type f` before and after
+you run `git prune-packed` if you are curious.  Also `git
+count-objects` would tell you how many unpacked objects are in
+your repository and how much space they are consuming.
+
+[NOTE]
+`git pull` is slightly cumbersome for HTTP transport, as a
+packed repository may contain relatively few objects in a
+relatively large pack. If you expect many HTTP pulls from your
+public repository you might want to repack & prune often, or
+never.
+
+If you run `git repack` again at this point, it will say
+"Nothing new to pack.". Once you continue your development and
+accumulate the changes, running `git repack` again will create a
+new pack, that contains objects created since you packed your
+repository the last time. We recommend that you pack your project
+soon after the initial import (unless you are starting your
+project from scratch), and then run `git repack` every once in a
+while, depending on how active your project is.
+
+When a repository is synchronized via `git push` and `git pull`
+objects packed in the source repository are usually stored
+unpacked in the destination.
+While this allows you to use different packing strategies on
+both ends, it also means you may need to repack both
+repositories every once in a while.
+
+
+Working with Others
+-------------------
+
+Although Git is a truly distributed system, it is often
+convenient to organize your project with an informal hierarchy
+of developers. Linux kernel development is run this way. There
+is a nice illustration (page 17, "Merges to Mainline") in
+https://web.archive.org/web/20120915203609/http://www.xenotime.net/linux/mentor/linux-mentoring-2006.pdf[Randy Dunlap's presentation].
+
+It should be stressed that this hierarchy is purely *informal*.
+There is nothing fundamental in Git that enforces the "chain of
+patch flow" this hierarchy implies. You do not have to pull
+from only one remote repository.
+
+A recommended workflow for a "project lead" goes like this:
+
+1. Prepare your primary repository on your local machine. Your
+   work is done there.
+
+2. Prepare a public repository accessible to others.
++
+If other people are pulling from your repository over dumb
+transport protocols (HTTP), you need to keep this repository
+'dumb transport friendly'.  After `git init`,
+`$GIT_DIR/hooks/post-update.sample` copied from the standard templates
+would contain a call to 'git update-server-info'
+but you need to manually enable the hook with
+`mv post-update.sample post-update`.  This makes sure
+'git update-server-info' keeps the necessary files up to date.
+
+3. Push into the public repository from your primary
+   repository.
+
+4. 'git repack' the public repository. This establishes a big
+   pack that contains the initial set of objects as the
+   baseline, and possibly 'git prune' if the transport
+   used for pulling from your repository supports packed
+   repositories.
+
+5. Keep working in your primary repository. Your changes
+   include modifications of your own, patches you receive via
+   e-mails, and merges resulting from pulling the "public"
+   repositories of your "subsystem maintainers".
++
+You can repack this private repository whenever you feel like.
+
+6. Push your changes to the public repository, and announce it
+   to the public.
+
+7. Every once in a while, 'git repack' the public repository.
+   Go back to step 5. and continue working.
+
+
+A recommended work cycle for a "subsystem maintainer" who works
+on that project and has an own "public repository" goes like this:
+
+1. Prepare your work repository, by running 'git clone' on the public
+   repository of the "project lead". The URL used for the
+   initial cloning is stored in the remote.origin.url
+   configuration variable.
+
+2. Prepare a public repository accessible to others, just like
+   the "project lead" person does.
+
+3. Copy over the packed files from "project lead" public
+   repository to your public repository, unless the "project
+   lead" repository lives on the same machine as yours.  In the
+   latter case, you can use `objects/info/alternates` file to
+   point at the repository you are borrowing from.
+
+4. Push into the public repository from your primary
+   repository. Run 'git repack', and possibly 'git prune' if the
+   transport used for pulling from your repository supports
+   packed repositories.
+
+5. Keep working in your primary repository. Your changes
+   include modifications of your own, patches you receive via
+   e-mails, and merges resulting from pulling the "public"
+   repositories of your "project lead" and possibly your
+   "sub-subsystem maintainers".
++
+You can repack this private repository whenever you feel
+like.
+
+6. Push your changes to your public repository, and ask your
+   "project lead" and possibly your "sub-subsystem
+   maintainers" to pull from it.
+
+7. Every once in a while, 'git repack' the public repository.
+   Go back to step 5. and continue working.
+
+
+A recommended work cycle for an "individual developer" who does
+not have a "public" repository is somewhat different. It goes
+like this:
+
+1. Prepare your work repository, by 'git clone' the public
+   repository of the "project lead" (or a "subsystem
+   maintainer", if you work on a subsystem). The URL used for
+   the initial cloning is stored in the remote.origin.url
+   configuration variable.
+
+2. Do your work in your repository on 'master' branch.
+
+3. Run `git fetch origin` from the public repository of your
+   upstream every once in a while. This does only the first
+   half of `git pull` but does not merge. The head of the
+   public repository is stored in `.git/refs/remotes/origin/master`.
+
+4. Use `git cherry origin` to see which ones of your patches
+   were accepted, and/or use `git rebase origin` to port your
+   unmerged changes forward to the updated upstream.
+
+5. Use `git format-patch origin` to prepare patches for e-mail
+   submission to your upstream and send it out. Go back to
+   step 2. and continue.
+
+
+Working with Others, Shared Repository Style
+--------------------------------------------
+
+If you are coming from a CVS background, the style of cooperation
+suggested in the previous section may be new to you. You do not
+have to worry. Git supports the "shared public repository" style of
+cooperation you are probably more familiar with as well.
+
+See linkgit:gitcvs-migration[7] for the details.
+
+Bundling your work together
+---------------------------
+
+It is likely that you will be working on more than one thing at
+a time.  It is easy to manage those more-or-less independent tasks
+using branches with Git.
+
+We have already seen how branches work previously,
+with "fun and work" example using two branches.  The idea is the
+same if there are more than two branches.  Let's say you started
+out from "master" head, and have some new code in the "master"
+branch, and two independent fixes in the "commit-fix" and
+"diff-fix" branches:
+
+------------
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+  * [master] Release candidate #1
+---
+ +  [diff-fix] Fix rename detection.
+ +  [diff-fix~1] Better common substring algorithm.
++   [commit-fix] Fix commit message normalization.
+  * [master] Release candidate #1
+++* [diff-fix~2] Pretty-print messages.
+------------
+
+Both fixes are tested well, and at this point, you want to merge
+in both of them.  You could merge in 'diff-fix' first and then
+'commit-fix' next, like this:
+
+------------
+$ git merge -m "Merge fix in diff-fix" diff-fix
+$ git merge -m "Merge fix in commit-fix" commit-fix
+------------
+
+Which would result in:
+
+------------
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+  * [master] Merge fix in commit-fix
+---
+  - [master] Merge fix in commit-fix
++ * [commit-fix] Fix commit message normalization.
+  - [master~1] Merge fix in diff-fix
+ +* [diff-fix] Fix rename detection.
+ +* [diff-fix~1] Better common substring algorithm.
+  * [master~2] Release candidate #1
+++* [master~3] Pretty-print messages.
+------------
+
+However, there is no particular reason to merge in one branch
+first and the other next, when what you have are a set of truly
+independent changes (if the order mattered, then they are not
+independent by definition).  You could instead merge those two
+branches into the current branch at once.  First let's undo what
+we just did and start over.  We would want to get the master
+branch before these two merges by resetting it to 'master~2':
+
+------------
+$ git reset --hard master~2
+------------
+
+You can make sure `git show-branch` matches the state before
+those two 'git merge' you just did.  Then, instead of running
+two 'git merge' commands in a row, you would merge these two
+branch heads (this is known as 'making an Octopus'):
+
+------------
+$ git merge commit-fix diff-fix
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+  * [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
+---
+  - [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
++ * [commit-fix] Fix commit message normalization.
+ +* [diff-fix] Fix rename detection.
+ +* [diff-fix~1] Better common substring algorithm.
+  * [master~1] Release candidate #1
+++* [master~2] Pretty-print messages.
+------------
+
+Note that you should not do Octopus just because you can.  An octopus
+is a valid thing to do and often makes it easier to view the
+commit history if you are merging more than two independent
+changes at the same time.  However, if you have merge conflicts
+with any of the branches you are merging in and need to hand
+resolve, that is an indication that the development happened in
+those branches were not independent after all, and you should
+merge two at a time, documenting how you resolved the conflicts,
+and the reason why you preferred changes made in one side over
+the other.  Otherwise it would make the project history harder
+to follow, not easier.
+
+SEE ALSO
+--------
+linkgit:gittutorial[7],
+linkgit:gittutorial-2[7],
+linkgit:gitcvs-migration[7],
+linkgit:git-help[1],
+linkgit:giteveryday[7],
+link:user-manual.html[The Git User's Manual]
+
+GIT
+---
+Part of the linkgit:git[1] suite