about summary refs log tree commit diff
path: root/third_party/git/Documentation/git-sparse-checkout.txt
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/Documentation/git-sparse-checkout.txt')
-rw-r--r--third_party/git/Documentation/git-sparse-checkout.txt207
1 files changed, 0 insertions, 207 deletions
diff --git a/third_party/git/Documentation/git-sparse-checkout.txt b/third_party/git/Documentation/git-sparse-checkout.txt
deleted file mode 100644
index c0342e53938a..000000000000
--- a/third_party/git/Documentation/git-sparse-checkout.txt
+++ /dev/null
@@ -1,207 +0,0 @@
-git-sparse-checkout(1)
-======================
-
-NAME
-----
-git-sparse-checkout - Initialize and modify the sparse-checkout
-configuration, which reduces the checkout to a set of paths
-given by a list of patterns.
-
-
-SYNOPSIS
---------
-[verse]
-'git sparse-checkout <subcommand> [options]'
-
-
-DESCRIPTION
------------
-
-Initialize and modify the sparse-checkout configuration, which reduces
-the checkout to a set of paths given by a list of patterns.
-
-THIS COMMAND IS EXPERIMENTAL. ITS BEHAVIOR, AND THE BEHAVIOR OF OTHER
-COMMANDS IN THE PRESENCE OF SPARSE-CHECKOUTS, WILL LIKELY CHANGE IN
-THE FUTURE.
-
-
-COMMANDS
---------
-'list'::
-	Describe the patterns in the sparse-checkout file.
-
-'init'::
-	Enable the `core.sparseCheckout` setting. If the
-	sparse-checkout file does not exist, then populate it with
-	patterns that match every file in the root directory and
-	no other directories, then will remove all directories tracked
-	by Git. Add patterns to the sparse-checkout file to
-	repopulate the working directory.
-+
-To avoid interfering with other worktrees, it first enables the
-`extensions.worktreeConfig` setting and makes sure to set the
-`core.sparseCheckout` setting in the worktree-specific config file.
-+
-When `--cone` is provided, the `core.sparseCheckoutCone` setting is
-also set, allowing for better performance with a limited set of
-patterns (see 'CONE PATTERN SET' below).
-
-'set'::
-	Write a set of patterns to the sparse-checkout file, as given as
-	a list of arguments following the 'set' subcommand. Update the
-	working directory to match the new patterns. Enable the
-	core.sparseCheckout config setting if it is not already enabled.
-+
-When the `--stdin` option is provided, the patterns are read from
-standard in as a newline-delimited list instead of from the arguments.
-+
-When `core.sparseCheckoutCone` is enabled, the input list is considered a
-list of directories instead of sparse-checkout patterns. The command writes
-patterns to the sparse-checkout file to include all files contained in those
-directories (recursively) as well as files that are siblings of ancestor
-directories. The input format matches the output of `git ls-tree --name-only`.
-This includes interpreting pathnames that begin with a double quote (") as
-C-style quoted strings.
-
-'add'::
-	Update the sparse-checkout file to include additional patterns.
-	By default, these patterns are read from the command-line arguments,
-	but they can be read from stdin using the `--stdin` option. When
-	`core.sparseCheckoutCone` is enabled, the given patterns are interpreted
-	as directory names as in the 'set' subcommand.
-
-'disable'::
-	Disable the `core.sparseCheckout` config setting, and restore the
-	working directory to include all files. Leaves the sparse-checkout
-	file intact so a later 'git sparse-checkout init' command may
-	return the working directory to the same state.
-
-SPARSE CHECKOUT
----------------
-
-"Sparse checkout" allows populating the working directory sparsely.
-It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell
-Git whether a file in the working directory is worth looking at. If
-the skip-worktree bit is set, then the file is ignored in the working
-directory. Git will not populate the contents of those files, which
-makes a sparse checkout helpful when working in a repository with many
-files, but only a few are important to the current user.
-
-The `$GIT_DIR/info/sparse-checkout` file is used to define the
-skip-worktree reference bitmap. When Git updates the working
-directory, it updates the skip-worktree bits in the index based
-on this file. The files matching the patterns in the file will
-appear in the working directory, and the rest will not.
-
-To enable the sparse-checkout feature, run `git sparse-checkout init` to
-initialize a simple sparse-checkout file and enable the `core.sparseCheckout`
-config setting. Then, run `git sparse-checkout set` to modify the patterns in
-the sparse-checkout file.
-
-To repopulate the working directory with all files, use the
-`git sparse-checkout disable` command.
-
-
-FULL PATTERN SET
-----------------
-
-By default, the sparse-checkout file uses the same syntax as `.gitignore`
-files.
-
-While `$GIT_DIR/info/sparse-checkout` is usually used to specify what
-files are included, you can also specify what files are _not_ included,
-using negative patterns. For example, to remove the file `unwanted`:
-
-----------------
-/*
-!unwanted
-----------------
-
-
-CONE PATTERN SET
-----------------
-
-The full pattern set allows for arbitrary pattern matches and complicated
-inclusion/exclusion rules. These can result in O(N*M) pattern matches when
-updating the index, where N is the number of patterns and M is the number
-of paths in the index. To combat this performance issue, a more restricted
-pattern set is allowed when `core.sparseCheckoutCone` is enabled.
-
-The accepted patterns in the cone pattern set are:
-
-1. *Recursive:* All paths inside a directory are included.
-
-2. *Parent:* All files immediately inside a directory are included.
-
-In addition to the above two patterns, we also expect that all files in the
-root directory are included. If a recursive pattern is added, then all
-leading directories are added as parent patterns.
-
-By default, when running `git sparse-checkout init`, the root directory is
-added as a parent pattern. At this point, the sparse-checkout file contains
-the following patterns:
-
-----------------
-/*
-!/*/
-----------------
-
-This says "include everything in root, but nothing two levels below root."
-
-When in cone mode, the `git sparse-checkout set` subcommand takes a list of
-directories instead of a list of sparse-checkout patterns. In this mode,
-the command `git sparse-checkout set A/B/C` sets the directory `A/B/C` as
-a recursive pattern, the directories `A` and `A/B` are added as parent
-patterns. The resulting sparse-checkout file is now
-
-----------------
-/*
-!/*/
-/A/
-!/A/*/
-/A/B/
-!/A/B/*/
-/A/B/C/
-----------------
-
-Here, order matters, so the negative patterns are overridden by the positive
-patterns that appear lower in the file.
-
-If `core.sparseCheckoutCone=true`, then Git will parse the sparse-checkout file
-expecting patterns of these types. Git will warn if the patterns do not match.
-If the patterns do match the expected format, then Git will use faster hash-
-based algorithms to compute inclusion in the sparse-checkout.
-
-In the cone mode case, the `git sparse-checkout list` subcommand will list the
-directories that define the recursive patterns. For the example sparse-checkout
-file above, the output is as follows:
-
---------------------------
-$ git sparse-checkout list
-A/B/C
---------------------------
-
-If `core.ignoreCase=true`, then the pattern-matching algorithm will use a
-case-insensitive check. This corrects for case mismatched filenames in the
-'git sparse-checkout set' command to reflect the expected cone in the working
-directory.
-
-
-SUBMODULES
-----------
-
-If your repository contains one or more submodules, then those submodules will
-appear based on which you initialized with the `git submodule` command. If
-your sparse-checkout patterns exclude an initialized submodule, then that
-submodule will still appear in your working directory.
-
-
-SEE ALSO
---------
-
-linkgit:git-read-tree[1]
-linkgit:gitignore[5]
-
-GIT
----
-Part of the linkgit:git[1] suite