about summary refs log tree commit diff
path: root/third_party/git/Documentation/git-send-email.txt
diff options
context:
space:
mode:
Diffstat (limited to 'third_party/git/Documentation/git-send-email.txt')
-rw-r--r--third_party/git/Documentation/git-send-email.txt526
1 files changed, 526 insertions, 0 deletions
diff --git a/third_party/git/Documentation/git-send-email.txt b/third_party/git/Documentation/git-send-email.txt
new file mode 100644
index 000000000000..0a69810147e4
--- /dev/null
+++ b/third_party/git/Documentation/git-send-email.txt
@@ -0,0 +1,526 @@
+git-send-email(1)
+=================
+
+NAME
+----
+git-send-email - Send a collection of patches as emails
+
+
+SYNOPSIS
+--------
+[verse]
+'git send-email' [<options>] <file|directory|rev-list options>...
+'git send-email' --dump-aliases
+
+
+DESCRIPTION
+-----------
+Takes the patches given on the command line and emails them out.
+Patches can be specified as files, directories (which will send all
+files in the directory), or directly as a revision list.  In the
+last case, any format accepted by linkgit:git-format-patch[1] can
+be passed to git send-email.
+
+The header of the email is configurable via command-line options.  If not
+specified on the command line, the user will be prompted with a ReadLine
+enabled interface to provide the necessary information.
+
+There are two formats accepted for patch files:
+
+1. mbox format files
++
+This is what linkgit:git-format-patch[1] generates.  Most headers and MIME
+formatting are ignored.
+
+2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl'
+   script
++
+This format expects the first line of the file to contain the "Cc:" value
+and the "Subject:" of the message as the second line.
+
+
+OPTIONS
+-------
+
+Composing
+~~~~~~~~~
+
+--annotate::
+	Review and edit each patch you're about to send. Default is the value
+	of `sendemail.annotate`. See the CONFIGURATION section for
+	`sendemail.multiEdit`.
+
+--bcc=<address>,...::
+	Specify a "Bcc:" value for each email. Default is the value of
+	`sendemail.bcc`.
++
+This option may be specified multiple times.
+
+--cc=<address>,...::
+	Specify a starting "Cc:" value for each email.
+	Default is the value of `sendemail.cc`.
++
+This option may be specified multiple times.
+
+--compose::
+	Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
+	to edit an introductory message for the patch series.
++
+When `--compose` is used, git send-email will use the From, Subject, and
+In-Reply-To headers specified in the message. If the body of the message
+(what you type after the headers and a blank line) only contains blank
+(or Git: prefixed) lines, the summary won't be sent, but From, Subject,
+and In-Reply-To headers will be used unless they are removed.
++
+Missing From or In-Reply-To headers will be prompted for.
++
+See the CONFIGURATION section for `sendemail.multiEdit`.
+
+--from=<address>::
+	Specify the sender of the emails.  If not specified on the command line,
+	the value of the `sendemail.from` configuration option is used.  If
+	neither the command-line option nor `sendemail.from` are set, then the
+	user will be prompted for the value.  The default for the prompt will be
+	the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
+	set, as returned by "git var -l".
+
+--reply-to=<address>::
+	Specify the address where replies from recipients should go to.
+	Use this if replies to messages should go to another address than what
+	is specified with the --from parameter.
+
+--in-reply-to=<identifier>::
+	Make the first mail (or all the mails with `--no-thread`) appear as a
+	reply to the given Message-Id, which avoids breaking threads to
+	provide a new patch series.
+	The second and subsequent emails will be sent as replies according to
+	the `--[no-]chain-reply-to` setting.
++
+So for example when `--thread` and `--no-chain-reply-to` are specified, the
+second and subsequent patches will be replies to the first one like in the
+illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`:
++
+  [PATCH 0/2] Here is what I did...
+    [PATCH 1/2] Clean up and tests
+    [PATCH 2/2] Implementation
+    [PATCH v2 0/3] Here is a reroll
+      [PATCH v2 1/3] Clean up
+      [PATCH v2 2/3] New tests
+      [PATCH v2 3/3] Implementation
++
+Only necessary if --compose is also set.  If --compose
+is not set, this will be prompted for.
+
+--subject=<string>::
+	Specify the initial subject of the email thread.
+	Only necessary if --compose is also set.  If --compose
+	is not set, this will be prompted for.
+
+--to=<address>,...::
+	Specify the primary recipient of the emails generated. Generally, this
+	will be the upstream maintainer of the project involved. Default is the
+	value of the `sendemail.to` configuration value; if that is unspecified,
+	and --to-cmd is not specified, this will be prompted for.
++
+This option may be specified multiple times.
+
+--8bit-encoding=<encoding>::
+	When encountering a non-ASCII message or subject that does not
+	declare its encoding, add headers/quoting to indicate it is
+	encoded in <encoding>.  Default is the value of the
+	'sendemail.assume8bitEncoding'; if that is unspecified, this
+	will be prompted for if any non-ASCII files are encountered.
++
+Note that no attempts whatsoever are made to validate the encoding.
+
+--compose-encoding=<encoding>::
+	Specify encoding of compose message. Default is the value of the
+	'sendemail.composeencoding'; if that is unspecified, UTF-8 is assumed.
+
+--transfer-encoding=(7bit|8bit|quoted-printable|base64|auto)::
+	Specify the transfer encoding to be used to send the message over SMTP.
+	7bit will fail upon encountering a non-ASCII message.  quoted-printable
+	can be useful when the repository contains files that contain carriage
+	returns, but makes the raw patch email file (as saved from a MUA) much
+	harder to inspect manually.  base64 is even more fool proof, but also
+	even more opaque.  auto will use 8bit when possible, and quoted-printable
+	otherwise.
++
+Default is the value of the `sendemail.transferEncoding` configuration
+value; if that is unspecified, default to `auto`.
+
+--xmailer::
+--no-xmailer::
+	Add (or prevent adding) the "X-Mailer:" header.  By default,
+	the header is added, but it can be turned off by setting the
+	`sendemail.xmailer` configuration variable to `false`.
+
+Sending
+~~~~~~~
+
+--envelope-sender=<address>::
+	Specify the envelope sender used to send the emails.
+	This is useful if your default address is not the address that is
+	subscribed to a list. In order to use the 'From' address, set the
+	value to "auto". If you use the sendmail binary, you must have
+	suitable privileges for the -f parameter.  Default is the value of the
+	`sendemail.envelopeSender` configuration variable; if that is
+	unspecified, choosing the envelope sender is left to your MTA.
+
+--smtp-encryption=<encryption>::
+	Specify the encryption to use, either 'ssl' or 'tls'.  Any other
+	value reverts to plain SMTP.  Default is the value of
+	`sendemail.smtpEncryption`.
+
+--smtp-domain=<FQDN>::
+	Specifies the Fully Qualified Domain Name (FQDN) used in the
+	HELO/EHLO command to the SMTP server.  Some servers require the
+	FQDN to match your IP address.  If not set, git send-email attempts
+	to determine your FQDN automatically.  Default is the value of
+	`sendemail.smtpDomain`.
+
+--smtp-auth=<mechanisms>::
+	Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting
+	forces using only the listed mechanisms. Example:
++
+------
+$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ...
+------
++
+If at least one of the specified mechanisms matches the ones advertised by the
+SMTP server and if it is supported by the utilized SASL library, the mechanism
+is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth`
+is specified, all mechanisms supported by the SASL library can be used. The
+special value 'none' maybe specified to completely disable authentication
+independently of `--smtp-user`
+
+--smtp-pass[=<password>]::
+	Password for SMTP-AUTH. The argument is optional: If no
+	argument is specified, then the empty string is used as
+	the password. Default is the value of `sendemail.smtpPass`,
+	however `--smtp-pass` always overrides this value.
++
+Furthermore, passwords need not be specified in configuration files
+or on the command line. If a username has been specified (with
+`--smtp-user` or a `sendemail.smtpUser`), but no password has been
+specified (with `--smtp-pass` or `sendemail.smtpPass`), then
+a password is obtained using 'git-credential'.
+
+--no-smtp-auth::
+	Disable SMTP authentication. Short hand for `--smtp-auth=none`
+
+--smtp-server=<host>::
+	If set, specifies the outgoing SMTP server to use (e.g.
+	`smtp.example.com` or a raw IP address).  Alternatively it can
+	specify a full pathname of a sendmail-like program instead;
+	the program must support the `-i` option.  Default value can
+	be specified by the `sendemail.smtpServer` configuration
+	option; the built-in default is to search for `sendmail` in
+	`/usr/sbin`, `/usr/lib` and $PATH if such program is
+	available, falling back to `localhost` otherwise.
+
+--smtp-server-port=<port>::
+	Specifies a port different from the default port (SMTP
+	servers typically listen to smtp port 25, but may also listen to
+	submission port 587, or the common SSL smtp port 465);
+	symbolic port names (e.g. "submission" instead of 587)
+	are also accepted. The port can also be set with the
+	`sendemail.smtpServerPort` configuration variable.
+
+--smtp-server-option=<option>::
+	If set, specifies the outgoing SMTP server option to use.
+	Default value can be specified by the `sendemail.smtpServerOption`
+	configuration option.
++
+The --smtp-server-option option must be repeated for each option you want
+to pass to the server. Likewise, different lines in the configuration files
+must be used for each option.
+
+--smtp-ssl::
+	Legacy alias for '--smtp-encryption ssl'.
+
+--smtp-ssl-cert-path::
+	Path to a store of trusted CA certificates for SMTP SSL/TLS
+	certificate validation (either a directory that has been processed
+	by 'c_rehash', or a single file containing one or more PEM format
+	certificates concatenated together: see verify(1) -CAfile and
+	-CApath for more information on these). Set it to an empty string
+	to disable certificate verification. Defaults to the value of the
+	`sendemail.smtpsslcertpath` configuration variable, if set, or the
+	backing SSL library's compiled-in default otherwise (which should
+	be the best choice on most platforms).
+
+--smtp-user=<user>::
+	Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`;
+	if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`),
+	then authentication is not attempted.
+
+--smtp-debug=0|1::
+	Enable (1) or disable (0) debug output. If enabled, SMTP
+	commands and replies will be printed. Useful to debug TLS
+	connection and authentication problems.
+
+--batch-size=<num>::
+	Some email servers (e.g. smtp.163.com) limit the number emails to be
+	sent per session (connection) and this will lead to a failure when
+	sending many messages.  With this option, send-email will disconnect after
+	sending $<num> messages and wait for a few seconds (see --relogin-delay)
+	and reconnect, to work around such a limit.  You may want to
+	use some form of credential helper to avoid having to retype
+	your password every time this happens.  Defaults to the
+	`sendemail.smtpBatchSize` configuration variable.
+
+--relogin-delay=<int>::
+	Waiting $<int> seconds before reconnecting to SMTP server. Used together
+	with --batch-size option.  Defaults to the `sendemail.smtpReloginDelay`
+	configuration variable.
+
+Automating
+~~~~~~~~~~
+
+--no-[to|cc|bcc]::
+	Clears any list of "To:", "Cc:", "Bcc:" addresses previously
+	set via config.
+
+--no-identity::
+	Clears the previously read value of `sendemail.identity` set
+	via config, if any.
+
+--to-cmd=<command>::
+	Specify a command to execute once per patch file which
+	should generate patch file specific "To:" entries.
+	Output of this command must be single email address per line.
+	Default is the value of 'sendemail.tocmd' configuration value.
+
+--cc-cmd=<command>::
+	Specify a command to execute once per patch file which
+	should generate patch file specific "Cc:" entries.
+	Output of this command must be single email address per line.
+	Default is the value of `sendemail.ccCmd` configuration value.
+
+--[no-]chain-reply-to::
+	If this is set, each email will be sent as a reply to the previous
+	email sent.  If disabled with "--no-chain-reply-to", all emails after
+	the first will be sent as replies to the first email sent.  When using
+	this, it is recommended that the first file given be an overview of the
+	entire patch series. Disabled by default, but the `sendemail.chainReplyTo`
+	configuration variable can be used to enable it.
+
+--identity=<identity>::
+	A configuration identity. When given, causes values in the
+	'sendemail.<identity>' subsection to take precedence over
+	values in the 'sendemail' section. The default identity is
+	the value of `sendemail.identity`.
+
+--[no-]signed-off-by-cc::
+	If this is set, add emails found in Signed-off-by: or Cc: lines to the
+	cc list. Default is the value of `sendemail.signedoffbycc` configuration
+	value; if that is unspecified, default to --signed-off-by-cc.
+
+--[no-]cc-cover::
+	If this is set, emails found in Cc: headers in the first patch of
+	the series (typically the cover letter) are added to the cc list
+	for each email set. Default is the value of 'sendemail.cccover'
+	configuration value; if that is unspecified, default to --no-cc-cover.
+
+--[no-]to-cover::
+	If this is set, emails found in To: headers in the first patch of
+	the series (typically the cover letter) are added to the to list
+	for each email set. Default is the value of 'sendemail.tocover'
+	configuration value; if that is unspecified, default to --no-to-cover.
+
+--suppress-cc=<category>::
+	Specify an additional category of recipients to suppress the
+	auto-cc of:
++
+--
+- 'author' will avoid including the patch author.
+- 'self' will avoid including the sender.
+- 'cc' will avoid including anyone mentioned in Cc lines in the patch header
+  except for self (use 'self' for that).
+- 'bodycc' will avoid including anyone mentioned in Cc lines in the
+  patch body (commit message) except for self (use 'self' for that).
+- 'sob' will avoid including anyone mentioned in Signed-off-by lines except
+  for self (use 'self' for that).
+- 'misc-by' will avoid including anyone mentioned in Acked-by,
+  Reviewed-by, Tested-by and other "-by" lines in the patch body,
+  except Signed-off-by (use 'sob' for that).
+- 'cccmd' will avoid running the --cc-cmd.
+- 'body' is equivalent to 'sob' + 'bodycc' + 'misc-by'.
+- 'all' will suppress all auto cc values.
+--
++
+Default is the value of `sendemail.suppresscc` configuration value; if
+that is unspecified, default to 'self' if --suppress-from is
+specified, as well as 'body' if --no-signed-off-cc is specified.
+
+--[no-]suppress-from::
+	If this is set, do not add the From: address to the cc: list.
+	Default is the value of `sendemail.suppressFrom` configuration
+	value; if that is unspecified, default to --no-suppress-from.
+
+--[no-]thread::
+	If this is set, the In-Reply-To and References headers will be
+	added to each email sent.  Whether each mail refers to the
+	previous email (`deep` threading per 'git format-patch'
+	wording) or to the first email (`shallow` threading) is
+	governed by "--[no-]chain-reply-to".
++
+If disabled with "--no-thread", those headers will not be added
+(unless specified with --in-reply-to).  Default is the value of the
+`sendemail.thread` configuration value; if that is unspecified,
+default to --thread.
++
+It is up to the user to ensure that no In-Reply-To header already
+exists when 'git send-email' is asked to add it (especially note that
+'git format-patch' can be configured to do the threading itself).
+Failure to do so may not produce the expected result in the
+recipient's MUA.
+
+
+Administering
+~~~~~~~~~~~~~
+
+--confirm=<mode>::
+	Confirm just before sending:
++
+--
+- 'always' will always confirm before sending
+- 'never' will never confirm before sending
+- 'cc' will confirm before sending when send-email has automatically
+  added addresses from the patch to the Cc list
+- 'compose' will confirm before sending the first message when using --compose.
+- 'auto' is equivalent to 'cc' + 'compose'
+--
++
+Default is the value of `sendemail.confirm` configuration value; if that
+is unspecified, default to 'auto' unless any of the suppress options
+have been specified, in which case default to 'compose'.
+
+--dry-run::
+	Do everything except actually send the emails.
+
+--[no-]format-patch::
+	When an argument may be understood either as a reference or as a file name,
+	choose to understand it as a format-patch argument (`--format-patch`)
+	or as a file name (`--no-format-patch`). By default, when such a conflict
+	occurs, git send-email will fail.
+
+--quiet::
+	Make git-send-email less verbose.  One line per email should be
+	all that is output.
+
+--[no-]validate::
+	Perform sanity checks on patches.
+	Currently, validation means the following:
++
+--
+		*	Invoke the sendemail-validate hook if present (see linkgit:githooks[5]).
+		*	Warn of patches that contain lines longer than
+			998 characters unless a suitable transfer encoding
+			('auto', 'base64', or 'quoted-printable') is used;
+			this is due to SMTP limits as described by
+			http://www.ietf.org/rfc/rfc5322.txt.
+--
++
+Default is the value of `sendemail.validate`; if this is not set,
+default to `--validate`.
+
+--force::
+	Send emails even if safety checks would prevent it.
+
+
+Information
+~~~~~~~~~~~
+
+--dump-aliases::
+	Instead of the normal operation, dump the shorthand alias names from
+	the configured alias file(s), one per line in alphabetical order. Note,
+	this only includes the alias name and not its expanded email addresses.
+	See 'sendemail.aliasesfile' for more information about aliases.
+
+
+CONFIGURATION
+-------------
+
+sendemail.aliasesFile::
+	To avoid typing long email addresses, point this to one or more
+	email aliases files.  You must also supply `sendemail.aliasFileType`.
+
+sendemail.aliasFileType::
+	Format of the file(s) specified in sendemail.aliasesFile. Must be
+	one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus', or 'sendmail'.
++
+What an alias file in each format looks like can be found in
+the documentation of the email program of the same name. The
+differences and limitations from the standard formats are
+described below:
++
+--
+sendmail;;
+*	Quoted aliases and quoted addresses are not supported: lines that
+	contain a `"` symbol are ignored.
+*	Redirection to a file (`/path/name`) or pipe (`|command`) is not
+	supported.
+*	File inclusion (`:include: /path/name`) is not supported.
+*	Warnings are printed on the standard error output for any
+	explicitly unsupported constructs, and any other lines that are not
+	recognized by the parser.
+--
+
+sendemail.multiEdit::
+	If true (default), a single editor instance will be spawned to edit
+	files you have to edit (patches when `--annotate` is used, and the
+	summary when `--compose` is used). If false, files will be edited one
+	after the other, spawning a new editor each time.
+
+sendemail.confirm::
+	Sets the default for whether to confirm before sending. Must be
+	one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm`
+	in the previous section for the meaning of these values.
+
+EXAMPLES
+--------
+Use gmail as the smtp server
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+To use 'git send-email' to send your patches through the GMail SMTP server,
+edit ~/.gitconfig to specify your account settings:
+
+----
+[sendemail]
+	smtpEncryption = tls
+	smtpServer = smtp.gmail.com
+	smtpUser = yourname@gmail.com
+	smtpServerPort = 587
+----
+
+If you have multifactor authentication setup on your gmail account, you will
+need to generate an app-specific password for use with 'git send-email'. Visit
+https://security.google.com/settings/security/apppasswords to create it.
+
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
+
+	$ git format-patch --cover-letter -M origin/master -o outgoing/
+	$ edit outgoing/0000-*
+	$ git send-email outgoing/*
+
+The first time you run it, you will be prompted for your credentials.  Enter the
+app-specific or your regular password as appropriate.  If you have credential
+helper configured (see linkgit:git-credential[1]), the password will be saved in
+the credential store so you won't have to type it the next time.
+
+Note: the following core Perl modules that may be installed with your
+distribution of Perl are required:
+MIME::Base64, MIME::QuotedPrint, Net::Domain and Net::SMTP.
+These additional Perl modules are also required:
+Authen::SASL and Mail::Address.
+
+
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
+
+GIT
+---
+Part of the linkgit:git[1] suite